RELIANCE INDUSTRIES LIMITED Petroleum Business … · detailed list of the surplus materials along with terms & conditions for ... Email Address: - [email protected] ... invites

Tender No. RIL/E&P/MAT-SALE/2015/02 Page 1

RELIANCE INDUSTRIES LIMITED Petroleum Business (E&P)

Tender for Sale of Surplus Materials (RIL/E&P/MAT-SALE/2015/02)

(Under International Competitive Bidding)

Reliance Industries Limited (RIL), as operator, on behalf of itself and its co-venturers, namely, BP Exploration (Alpha) Limited, Niko (NECO) Limited, Niko (NELPIO) Limited and Hardy Exploration & Production (India) Inc. intends to sell the unused surplus materials under following major categories; and invites bids from reputed parties for their purchase on as is, where is basis at Ex Warehouse basis at RIL’s warehouses at Vakalpudi/ Gadimoga, Kakinada, AP, India (as per Incoterms 2010) in un-packed condition:

Category No. Surplus Materials Group

MAT-SALE/2015/A Casings & Accessories

MAT-SALE/2015/B Cementing Equipment

MAT-SALE/2015/C Chemicals

MAT-SALE/2015/D Drill Bits

MAT-SALE/2015/E Other Consumables

MAT-SALE/2015/F Pipes

MAT-SALE/2015/G Sand Control Equipment

MAT-SALE/2015/H Surface Production Inventory

MAT-SALE/2015/I Wellhead & Accessories

Interested parties are requested to visit our website www.ril.com for detailed list of the surplus materials along with terms & conditions for sale and submit their bid in a sealed envelope through courier / post, on or before 20th November 2015. The envelope should be superscribed as RIL/E&P/MAT-SALE/2015/02 along with category number. For any clarification, parties may send their queries on E-mail address – [email protected]. All the surplus material is unused and generally in good condition and test certificates, where applicable, are available. Interested parties may physically inspect the surplus materials at RIL’s Vakalpudi/ Gadimoga Warehouses near Kakinada, AP, India between 14th October 2015 to 13th November 2015 on working days during office hours with prior appointment.

Address for Communication: Vice President - Supply Chain Management,

Reliance Industries Limited, Petroleum Business (E&P), Building No 11, ‘A’ Wing, Second Floor, Reliance Corporate Park (RCP),

Thane-Belapur Road, Ghansoli, Navi Mumbai-400701, India Email Address: - [email protected] CIN: L17110MH1973PLC019786


RELIANCE INDUSTRIES LIMITED

Petroleum Business (E&P)

TENDER FOR SALE OF SURPLUS

MATERIALS

No: RIL/E&P/MAT-SALE/2015/02

INSTRUCTIONS TO SUBMIT BIDS

NOTICE DATE: 12/10/2015

DUE DATE FOR SUBMISSION OF PRICED COMMERCIAL BID: 20/11/2015

Important Notice

The contents of this Tender and all subsequent communications by Reliance Industries

Limited are strictly confidential and must not be disclosed to third parties.


TABLE OF CONTENTS

1. INTRODUCTION............................................ 4

2. DEFINITION OF TERMS ...................................... 4

3. GENERAL INSTRUCTIONS .................................... 4

4. SUBMISSION OF BID ........................................ 5

5. INSTRUCTIONS REGARDING TENDER .......................... 5

6. PRICE .................................................... 5

7. CURRENCY OF BID ......................................... 6

8. VALIDITY PERIOD OF BID AND CLARIFICATION OF BID ............. 6

9. SUFFICIENCY OF BID ........................................ 6

10. DUE DATE ............................................... 7

11. RIGHT TO ACCEPT OR REJECT BIDS AND COSTS ................ 7

12. EVALUATION OF BIDS ...................................... 7

13. AWARD.................................................. 8

14. SIGNING OF CONTRACT .................................... 8

15. CORRESPONDENCE / INQUIRY /NOTICES ....................... 8

16. GOVERNING LAW & JURISDICTION ............................ 8

17. EARNEST MONEY DEPOSIT (EMD) ............................ 8

18. DISCLAIMER .............................................. 9

ANNEXURES

ANNEXURE 1 LIST OF SURPLUS MATERIALS

ANNEXURE 2 FORMAT OF CONTRACT FOR SALE OF MATERIAL

ANNEXURE 3 PROFORMA FOR EMD


INSTRUCTIONS TO SUBMIT BIDS

CONFIDENTIALITY- THE CONTENTS OF THIS TENDER, ALL ADDENDA, ALL

DOCUMENTS AND ALL COMMUNICATIONS BETWEEN THE COMPANY (AS DEFINED

BELOW) AND BIDDER (AS DEFINED BELOW) ARE STRICTLY CONFIDENTIAL AND

MUST NOT BE DISCLOSED BY BIDDER TO ANY THIRD PARTY EXCEPT IN

ACCORDANCE WITH THE PROVISIONS OF THIS NOTICE. FAILURE TO COMPLY WITH

THIS REQUIREMENT MAY RESULT IN DISQUALIFICATION OF BIDDER FROM THE

TENDER PROCESS.

1. INTRODUCTION

Reliance Industries Limited (“RIL” or “Company”) on behalf of itself and Co-venturers

invites companies (each a "Bidder") to submit proposals (each a "Bid") in accordance

with this Tender for Sale of Surplus Materials.

2. DEFINITION OF TERMS

2.1 Capitalised terms used in these Instructions to Submit Bids shall have the meaning set

forth below or, if not set forth below, as set forth in the Purchase Order:

"Bid" is defined in Section 1.1;

"Bid Validity Period" is defined in Section 8.1;

"Bidder" is defined in Section 1.1

"Buyer" means the entity / entities with whom Contract is

signed by Company for sale of Surplus Materials;

"Contract" is defined in Section 8.3;

"Company" or “RIL” is defined in Section 1.1

"Company Submission

Address"

means the address for submission of documents to

the Company as set out in Section 4.3;

“EMD” means Earnest Money Deposit

“Surplus Materials” full or part of the items detailed in Annexure 1 and

offered for sale by Company

"Priced Commercial Bid" is defined in Section 4.1;

"Tender" means the entirety of this tender document soliciting

Bids issued on 12th October 2015 and entitled No:

RIL/E&P/MAT-SALE/2015/02 for Sale of Surplus

Materials including all addenda;

3. GENERAL INSTRUCTIONS

3.1 Bidders are requested to refer to the list of Surplus Materials (Annexure-1) to ensure

that they fully understand the materials put up for sale under this Tender.

3.2 Bidders may seek clarifications on any part of the Tender and other documents.

However, all such clarifications must be received within thirty (30) days of issue of this

Tender. The Company shall not accept any requests for clarifications thereafter.


3.3 Once a Bid is submitted no changes will be permitted.

4. SUBMISSION OF BIDS

4.1 Bidders are required to submit their proposal in one envelope marking "Priced

Commercial Bid" and EMD should be submitted in separate envelope marking

“Earnest Money Deposit”.

Both envelopes must be submitted super-scribing the Tender number, Due Date and

the relevant part of the Bid i.e. “Priced Commercial Bid” or “Earnest Money Deposit”, as

the case may be. Both sealed envelopes should be placed in a bigger sealed envelope

(the "Master Envelope"). The Master Envelope containing the Bid should be super-

scribed as:

Bidder : II.IIIIIII..

Tender no : RIL/E&P/MAT-SALE/2015/02

Description of Tender : Sale of Surplus Materials

Due Date : II.IIIIIII..

Bids shall become the property of the Company, upon submission.

4.2 The Priced Commercial Bid shall contain all the Annexures, including Annexure 1

mentioning required quantity of Surplus Materials and unit price against items for which

Bidder is submitting the Bid.

Bidders are required to furnish, as applicable, full details of:

a) their organization profile;

b) their audited balance sheets and profit and loss statements for the preceding three

financial years, or in the event that the Bidder has been incorporated for less than

three years, all audited balance sheets and profit and loss statements.

4.3 The Company Submission Address is:

Reliance Industries Limited – Operator

Petroleum Business (E&P)

Reliance Corporate Park (RCP),

Building No 11, 'A' Wing, Second Floor,

Thane Belapur Road, Ghansoli,

Navi Mumbai – 400701. INDIA

Tel: 91 22 447 85728 Fax: 91 22 447 70851

Attn: Mr. Suresh PM

5. INSTRUCTIONS REGARDING TENDER

5.1 Bidders shall submit the Bid in accordance with this Tender in their entirety, complete

in all respects including all Annexures. Any additional information which Bidder wishes

to submit shall be attached as a supplement to Priced Commercial Bid.

5.2 The Bid and any annotations or accompanying documentation and all other written

communications from Bidder shall be in the English language only.

6. PRICE

6.1 The prices quoted for purchase of Surplus Materials must be firm and should be in the

Proforma for prices given in Annexure 1. Bidder shall quote unit price along with

quantity required (full or part) on as is, where is basis at Ex Warehouse basis at RIL’s

Warehouses, Vakalpudi/ Gadimoga, Kakinada, AP, India (as per Incoterms 2010) in

un-packed condition, however loading of Surplus Materials shall be done by Company

free of charge. Company can arrange for packing, if requested by Buyer, as per their


instructions and cost of such packing shall be deposited by the Buyer before lifting of

Surplus Materials.

6.2 Indian Bidders to note that Surplus Materials are either imported in to India after

availing import duty exemptions or procured in India availing excise duty exemptions,

as available under respective Production Sharing Contract signed with Govt. of India.

Any sale of Surplus Materials in India shall attract either Customs duties or excise

duties including applicable interest till the date of payment of such duties by Buyer,

sales tax, local duties, levies etc. and quoted price shall be net of all such taxes, duties,

levies and interest applicable in India on sale of Surplus Materials. For Indian Bidders

who intend to purchase Surplus Materials for use in Oil & Gas or CBM Blocks entitled

for Customs Duty exemption, the possibility of block transfer of Surplus Materials with

approval of DGH will be explored.

6.3 No taxes, duties or levies are applicable on sale and export of Surplus Materials

outside India. However, Buyer shall be responsible for any taxes, duties or levies in

their country of import.

7. CURRENCY OF BID

7.1 Foreign Bidders shall quote the prices in United States Dollars (USD) and Indian

Bidders shall quote the prices in Indian Rupees (INR).

7.2 Payment shall be made by Buyer in the currency in which the Bid is made. Currency

once quoted shall not be changed. For evaluating the Bids, the Reserve Bank of India

(RBI) reference rate on the last working day prior to opening of Priced Commercial Bid

will be taken into account for conversion of USD into INR and vice versa.

8. VALIDITY PERIOD OF BID AND CLARIFICATION OF BID

8.1 The Bid shall remain unconditionally valid for acceptance for a period (the "Bid Validity

Period") of ninety (90) days from the Due Date (as defined below).

8.2 The Company may request additional information, clarifications and verifications with

respect to any aspect of the Bid. Bidder is requested to respond, in writing, to such

request within the time limit specified by the Company.

8.3 Each proposal submitted by a Bidder is a “Bid” capable of acceptance by the Company

(in its sole discretion). Any such acceptance by the Company of a Bid shall only be

made by the Company by signing the Contract for Sale of Material (the "Contract") in

the format provided at Annexure 2 and no other act, omission or representation shall

be deemed to constitute or result in acceptance by the Company of any contract. Upon

signing of Contract by Company, Bidder shall be contractually bound to sign the

Contract and buy the Surplus Materials, without any further requirement of acceptance

by the Bidder.

9. SUFFICIENCY OF BID

9.1 Interested Bidders may physically inspect the Surplus Materials at RIL’s Vakalpudi/

Gadimoga Warehouses near Kakinada, AP, India between 14th October 2015 to 13th

November 2015 on working days during office hours with prior appointment to satisfy

themselves regarding the quality & condition of the Surplus Materials. No complaint

whatsoever will be entertained after the Bids are submitted or before or after the

Surplus Material is lifted. At the time of physical inspection of Surplus Materials, Bidder

may also carry out Non-Destructive Testing (NDT) at their cost. No request for samples

or inspection after submission of the Bid will be accepted. The address and contact

person details for the warehouse visit are as below:

Reliance Industries Limited


Petroleum Business (E & P), Second Floor, RIL Operation Building

Infra Area, Gadimoga

Tallarevu Mandal – 533 463

East Godavari District

Andhra Pradesh, India Attention: Mr. KSS Rao ([email protected]) /

Mr. Uday Joshi ([email protected])

CC: [email protected]

9.2 Each Bidder shall make its own interpretation of any and all information provided in this

Tender including all addenda, Annexures and shall obtain and verify all necessary data

and information including informing itself with respect to all conditions which might in

any way affect the quoted price for Surplus Materials. No relief or consideration will be

given for any errors and/or omissions contained in this Tender including any

addendum, Annexures and neither the Company, its Affiliates nor its advisors or

consultants will in any way be responsible for the accuracy or completeness of such

information and/or its interpretation by Bidders. In no event whatsoever will the

Company, its Affiliates, its advisers or consultants be liable to Bidders for any

information contained in or omitted from this Tender including any addenda,

Annexures.

9.4 No action by the Company shall amount to an approval of the contents of the relevant

Bid or acceptance of its suitability for any purpose. The Contract, once signed, shall

constitute the entire agreement between the Company and the Bidder (thereafter the

"Buyer") in relation to purchase of Surplus Materials by the Buyer.

10. DUE DATE

10.1 The due date and time for submission of Bids in response to this Tender is 17:00 hours

(Indian Standard Time) on 20th November 2015 (the "Due Date"). The Priced

Commercial Bid along with EMD must be submitted in accordance with this Tender no

later than 17:00 hours (Indian Standard Time) on the Due Date. The Company

reserves the right to reject Bids received after the Due Date, even if the Bid is received

late due to reasons outside of Bidder's control. Bids must be submitted in the manner

and at the addresses set out in Section 4.0 above.

10.2 In exceptional circumstances, the Company may request the Bidder's consent to an

extension of the Bid Validity Period. Both the request for extension and response shall

be made in writing.

11. RIGHT TO ACCEPT OR REJECT BIDS AND COSTS

11.1 The Company reserves the right, in its sole discretion, to accept or reject any Bid,

wholly or in part, or to annul and cancel the bidding process and reject all Bids at any

time, without assigning any reason for the same. The Company will not assume any

liability for rejection of any Bid or cancellation of the bidding process.

11.2 All costs associated with the preparation and submission of Bids, attending clarification

meetings, answering clarification and further information requests and carrying out all

other activities related to the Bid process will be for the account of Bidders, and no

claims for the same will be entertained by the Company under any circumstances.

12. EVALUATION OF BIDS

12.1 The decision of the Company in relation to the evaluation of Bids shall be final and

binding on all Bidders and shall not be subject to dispute by Bidders under any

circumstances.


13. AWARD

13.1 The documents included in this Tender will form part of the Contract to be executed by

the successful Bidder.

14. SIGNING OF CONTRACT

14.1 Acceptance of the Bid by the Company will be by way of a signing of Contract by

Company which shall be legally binding on the successful Bidder issued by telefax,

mail, hand or courier to the successful Bidder. If issued by telefax, the original Contract

in such case will be forwarded to the successful Bidder as soon as reasonably

possible.

14.2 The successful Bidder shall collect the Surplus Materials within ninety (90) days from

the date of receipt of payment by the Company.

15. CORRESPONDENCE / INQUIRY /NOTICES

Any and all inquiries/ clarifications shall be in writing and directed only to:

Reliance Industries Ltd. – Operator

(Petroleum Business-E&P)

Reliance Corporate Park (RCP),

Building No 11, 'A' Wing, Second Floor,

Thane Belapur Road, Ghansoli,

Navi Mumbai – 400701. INDIA

Tel: +91 22 44785728

Fax. +91 22 44770851

Attn: Mr. Suresh PM

E-mail: [email protected]

16. GOVERNING LAW & JURISDICTION

This Tender shall be governed by and construed in accordance with the laws of India.

All disputes arising out of or with respect to this Tender shall be subject to the exclusive

jurisdiction of courts in Mumbai only.

17. EARNEST MONEY DEPOSIT (EMD)

17.1 Bidder shall furnish earnest money deposit (the “EMD”) in the form of an irrevocable

and unconditional bank guarantee in the format and language given in Annexure 3

(Proforma for EMD) hereof. The EMD amount shall be 2% (two percent) of total value

of Bid in the currency quoted by Bidders (USD/INR). The EMD shall be valid during the

Bid Validity Period and for a period of 60 (sixty) days thereafter.

17.2 If the required EMD is not submitted to the Company with the Bid, the Bid shall be

summarily rejected.

17.3 If the Contract is entered into by Company with a Bidder, Bidder shall arrange to keep

the EMD valid up to 90 days from the date of signing of the Contract by Company.

17.4 The EMD may be encashed by the Company in the event that:

a) the Bidder fails or refuses to keep its Bid open or withdraws its Bid during the

Bid Validity Period;

b) the Bidder fails or refuses to make the payment within 15 days of submission of

proforma invoice by Company;

17.5 For the avoidance of doubt, it is clarified that encashment of EMD shall be in addition to

any other legal or equitable remedy available to the Company.


17.6 EMD of unsuccessful Bidders will be returned after finalization of Tender. EMD of

successful Bidder/ Buyer will be returned after lifting of Surplus Materials as per terms

of Contract.

18. DISCLAIMER

The information presented in this Tender is furnished solely for the purpose of assisting

the prospective Bidder in preparing and submitting its Bid and does not purport to be

all-inclusive nor to contain all the information, which the prospective Bidder may

require. The prospective Bidder shall make its own investigations, visits, projections

and conclusions and consult its own advisors to verify independently the information

contained in this Tender, and to obtain any additional information that it may require,

prior to submitting the Bid. Neither the Company, its Co-venturers nor their respective

advisors makes any representation or warranty as to the completeness of this Tender

nor have they any liability for any representations (express or implied) contained in, or

omissions from, this Tender.

List of Surplus Materials Annexure 1

Currency of Bid: USD / INRSl.

No. Item Category Sub category Material Material Description UOM

Available

Qty

Required

Qty (A)

Unit Price

Quoted (B)

Total Amount

Quoted (A*B)

A1 Casings 2000502423 CSG X52 RL4 -- 30IN 310PPF M 258.77

A2 Casings 2000502424 CSG X52 RL4 -- 30IN 456PPF M 616.46

A3 Casings 2000591434 CSG Q125 VT -- 7IN 32PPF M 3,474.23

A4 Casings 2000596431 DRIVE SHOE 30" W/ 1.5" WALL THK,X-52 EA 10.00

A5 Casings 2000737602 CSG P110 DV -- 13.3/8IN 72PPF M 359.94

A6 Casings 2000745372 CSG,EXPANDABLE,9-7/8"XOUTER HOLE 7-1/2" M 500.00

A7 Casings 2000745374 ASSEMBLY, LAUNCHER, 7-5/8" X 9-5/8" EA 5.00

A8 Casings 2000746350 CSG L80 NVSC -- 10.3/4IN 51PPF M 21,560.67

A9 Casings 2000871950 JOINT,LNR,EXPANDABLE,8-5/8",EP XPC P X B M 110.00

A10 Casings 2000871952 ASSY LAUNCHER, EP XPC P,8-5/8" X 10-3/4" EA 2.00

A11 Casings 2000891538 CSG P110 VT SC80 -- 10.3/4IN 60.7 PPF M 36,948.10

A12 Casings 2000891539 CSG X56 RL4S -- 26IN 235PPF M 669.88

A13 Casings 2000891542 CSG X52 D60-MT -- 30IN 456PPF M 468.09

A14 Casings 2000891543 CSG X56 S60-MT -- 26IN 235PPF M 481.36

A15 Casings 2000891549 CSGPUP P110 VT SC80 10.3/4IN 60.7PPF 10' EA 47.00

A16 Casings 2000891550 CSGPUP P110 VT SC80 10.3/4IN 60.7PPF 15' EA 37.00

A17 Casings 2000992680 CSG P110 NVSC -- 10.3/4IN 60.7 PPF M 1,807.52

A18 Casings 2001006560 CSG P110 VT SC80 -- 10.3/4IN 65.7PPF M 5,528.80

A19 Casings 2001090051 LNR,ANCHOR,HNG, EP XPC P,7-5/8" X 9-7/8" EA 6.00

A20 Casings 2001090052 JOINT, EXPANDABLE LINER, 7-5/8" EA 152.00

A21 Casings 2001131936 CSG X52 D-90MT R3 30IN 456PPF M 365.42

A22 Casings 2001145922 TBGXR VM80 13CR VTB VTP 5.1/2IN 5.1/2IN EA 30.00

A23 Casings 2001160339 CSG Q125 NEW VAM -- 7IN 32PPF M 2,812.61

A24 Casings 2001184444 TBG PUP JT L80 VT BXP 7IN 96" EA 41.00

A25 Casings 2001235833 TBG PUP JT 13CRL80 VTB X P 7.701IN 6FT EA 15.00

A26 Casings 2001255854 BUSHING DRLBLE 9 5/8" L80 VT 13 CR 53.5# EA 3.00

A27 Casings 2001255855 CSG ALGNT SUB 9 5/8" L-80,13 CR,53.5# EA 3.00

A28 Casings 2001255856 WINDOW FLEXRITE 9 5/8" EA 3.00

A29 Casings 2001255857 CSG WNDOW LEAD MILL 8 1/2" F 9 5/8" EA 3.00

A30 Casings 2001255859 WHIPSTOCK TAPERFACE EA 3.00

A31 Casings 2001255860 ASMBLY COMPN DFLCTOR 9 5/8", 5" 18# VTPD EA 3.00

A32 Casings 2001255861 LTRL SWIVEL FLEXRITE 6 5/8" 24# SUB 13CR EA 3.00

A33 Casings 2001255862 JUNN INTRVN FLEXRITE 9 5/8" 53.5# 13CR EA 3.00

A34 Casings 2001614928 CASING,7-5/8 39 LB/FT; PN:201000347 M 507.15

B1 Cementing Equipements 2000620447 PCKR LNR HANG 5IN 7IN EA 4.00

B2 Cementing Equipements 2000640718 CENTR CSG SOLID,ROT 5IN 7IN 6IN EA 305.00

B3 Cementing Equipements 2000640720 CENTR CSG RIGID,POS 9.5/8 13.3/8 12.1/4 EA 277.00

Tender No. RIL/E1/MAT-SALE/2015/02

Sl.


Available

Qty

Required

Qty (A)

Unit Price

Quoted (B)

Total Amount

Quoted (A*B)

B4 Cementing Equipements 2000649656 CENTR CSG SEMRGD 13.3/8IN 20IN 17.1/2IN EA 258.00

B5 Cementing Equipements 2000664746 PACKER, 5" 18 LB/FT X 7" 29-32 LB/FT EA 3.00

B6 Cementing Equipements 2000672025 PLUG,SUB SEA,13.3/8" EA 13.00

B7 Cementing Equipements 2000746352 HNG LNR HYDRST P110 7.5/8IN -- 10.3/4IN ST 5.00

B8 Cementing Equipements 2000746358 PACKER,LINER,FOR 5-1/2"X7-5/8" HANGER ST 2.00

B9 Cementing Equipements 2000747278 RETAINER,CEMENT,WIRELINE,CASING,10-3/4" EA 15.00

B10 Cementing Equipements 2000770025 JOINT,FLUSH,7",29#,Q125,GAS TIGHT CONN. M 1,309.87

B11 Cementing Equipements 2000797898 CLLR LND LNR HANG L80 SOUR DVBXDVP 16" EA 2.00

B12 Cementing Equipements 2000797909 HANGER,LINER,16" X 20",DVP X DVP EA 3.00

B13 Cementing Equipements 2000797913 SEAL ASSY TB LNR HANG 10FT 16IN EA 2.00

B14 Cementing Equipements 2000803450 CENTR CSG SEMRGD 13.3/8IN 20IN 16IN EA 572.00

B15 Cementing Equipements 2000803451 CENTR CSG SOLID,ROT 7IN 9.7/8IN 8.1/2IN EA 279.00

B16 Cementing Equipements 2000950848 CENTR CSG SPG BOW 16IN 20IN 20IN COL OD EA 82.00

B17 Cementing Equipements 2000957054 CLR FLT CMTG NR P110 VT 101PPF 14IN EA 3.00

B18 Cementing Equipements 2000957064 SHOE FLT CMTG P110 VT 14IN - 101PPF EA 3.00

B19 Cementing Equipements 2000959464 CENTR CSG SOLID,ROT 7.5/8 10.3/4 9.1/2 EA 345.00

B20 Cementing Equipements 2001042184 HNG LNR HYDRST 5CT 7IN NV 9.5/8IN EA 2.00

B21 Cementing Equipements 2001043395 PACKER, L/HANGER, INTEGRAL,16"X20",DVP EA 1.00

B22 Cementing Equipements 2001075872 CENTR CSG SPG BOW 13.3/8IN 20IN 17.1/2IN EA 519.00

B23 Cementing Equipements 2001080692 L/HNG HYD ASSY 16"X20",DVMSP 10' LG EA 2.00

B24 Cementing Equipements 2001101458 PCKR LNR HANG 16"X20",DVMSB 20' LG EA 6.00

B25 Cementing Equipements 2001101460 VLV FLAPPER ASSLY,16"DVMSP X DVMSB EA 6.00

B26 Cementing Equipements 2001101465 PCKR LNR HANG 16 -- EA 5.00

B27 Cementing Equipements 2001101466 SEAL ASSY PBR 16" DVMSP, 20' LG EA 4.00

B28 Cementing Equipements 2001115645 CLR LND LNRHANG P110 VTSC80B/P 10.3/4IN EA 8.00

B29 Cementing Equipements 2001115791 REAMER SHOE 10-3/4" EA 8.00

B30 Cementing Equipements 2001115797 LNR TOP ISL PCKR 11.3/4" 60# STL BOX,20' EA 1.00

B31 Cementing Equipements 2001115868 CLR FLT CMTG TOPCO P110 VTSC80BP 10.3/4 EA 8.00

B32 Cementing Equipements 2001115890 PCKR LNR HANG 5.1/2IN 7.5/8IN EA 3.00

B33 Cementing Equipements 2001115891 PCKR LNR HANG 7.5/8IN 10.3/4IN EA 3.00

B34 Cementing Equipements 2001115956 LNR TOP ISL PCKR 7",47-53.5# NV PIN, 20' EA 7.00

B35 Cementing Equipements 2001115957 CONTROL SET LNR HNGR 7" X 9.5/8" EA 5.00

B36 Cementing Equipements 2001115963 CONTROL SET LNR HNGR 5.1/2" X 7.5/8" EA 2.00

B37 Cementing Equipements 2001115970 CONTROL SET LNR HNGR 7.5/8" X 10.3/4" EA 2.00

B38 Cementing Equipements 2001133430 PCKR LNR TOP 7.5/8",NV BOX, P110 EA 4.00

B39 Cementing Equipements 2001133431 PHR LNR HNGR 7.5/8", NV PXP, P110 EA 3.00

B40 Cementing Equipements 2001147267 SGL VLV REAM SHOE 7" X 8.250" 32# NVBP EA 3.00

B41 Cementing Equipements 2001233501 PCKR LNR HANG 9-5/8" 9-5/8" EA 3.00

B42 Cementing Equipements 2001233502 PCR BORE RCPTCLE SL ASLY 7" 26# VTBU 15' EA 3.00

B43 Cementing Equipements 2001268946 CASING PACKER M&F IINTEGRAL;PN:1999452 EA 4.00


Sl.


Available

Qty

Required

Qty (A)

Unit Price

Quoted (B)

Total Amount

Quoted (A*B)

B44 Cementing Equipements 2001338491 ASSY SEAL PBR BULLET 7" 29# VTBU 10' LG EA 3.00

C1 Chemicals 1000003588 CHEM SODIUM SIL A3L GAL 8,525.00

C2 Chemicals 1000004763 HEMAETITE,W-5,CEMENTING CHEMICAL LB 267,649.67

D1 Drill Bits 2000502536 BIT,DRILL,IADC 115,16",MGSSH+C EA 2.00

D2 Drill Bits 2000502555 BIT,DRILL,PDC,IADC 442,4.1/8",M20PX EA 3.00

D3 Drill Bits 2000541044 BIT DRL TCI 415 17.1/2 -- -- EA 1.00


D5 Drill Bits 2000589560 BIT DRL PDC REG M332 8.1/2 B-8 C-13 EA 1.00

D6 Drill Bits 2000745368 BIT BCN S244 8.½ X9.7/8 B-5X4 C-13X13 EA 1.00

D7 Drill Bits 2000745370 BIT,DRILL,BI-CENTRE, 7-1/2" X 8-1/2" EA 1.00

D8 Drill Bits 2000767962 BIT,DRILL,BICENTRE,10"/10.5"X12-1/4"/12" EA 1.00


D10 Drill Bits 2000819222 BIT DRL TCR 437 14.3/4 -- -- EA 2.00


D12 Drill Bits 2000835818 BIT DRL PDC REG S123 16 B-5 C-19 EA 3.00

D13 Drill Bits 2000835870 BIT DRL TCR 115 16 -- -- EA 4.00

D14 Drill Bits 2000835871 BIT DRL TCI 415 16 -- -- EA 3.00






D20 Drill Bits 2000846476 BIT,DRILL,IADC537,12 1/4",F30DCPD,TCI EA 2.00


D22 Drill Bits 2000876587 BIT DRL PDC RSS M223 9.1/2 B-6 C-16 EA 1.00


D24 Drill Bits 2000879335 BIT DRL PDC IMPREG M842 8.1/2 -- C-5X13 EA 2.00

D25 Drill Bits 2000879626 BIT BCN S422 7.½ X 8.½ B-6X7 C10.5X10.5 EA 1.00

D26 Drill Bits 2000879627 BIT BCN S344 7.½ X 8.½ B-4X5 C-13X13 EA 1.00

D27 Drill Bits 2000946322 BIT BCN S232 6X7 B-4X4 C-13X13 EA 1.00


D29 Drill Bits 2000989993 BIT DRL PDC REG S223 16 B-6 C-19X16 EA 1.00




D33 Drill Bits 2001031866 BIT DRL PDC RSS S222 6.5/8 B-5 C-16 EA 2.00

D34 Drill Bits 2001077249 BIT DRL PDC REG M323 6 B-7 C-16 EA 1.00


D36 Drill Bits 2001119820 BIT DRL PDC IMPREG M842 12.1/4 B-22 C-8 EA 5.00



Sl.


Available

Qty

Required

Qty (A)

Unit Price

Quoted (B)

Total Amount

Quoted (A*B)


D39 Drill Bits 2001156161 BIT DRL PDC IMPREG M842 9.1/2 -- -- EA 2.00


D41 Drill Bits 2001300870 BIT DRL PDC M433 8.1/2 B7 C13 -- EA 1.00

D42 Drill Bits 2001520387 BIT DRL PDC REG M323 9.1/2" B-5 C-19 EA 1.00

D43 Drill Bits 2001520388 BIT DRL PDC REG M233 4.3/4" B-4 C-13 EA 3.00

D44 Drill Bits 2001522134 BIT DRL TCR 111 30" -- -- EA 2.00

D45 Drill Bits 2001630418 BIT DRL TCR 415/437 17" IN EA 2.00

D46 Drill Bits 2001631787 BIT DRL PDC REG SB S123 17" B-5 C-19 EA 3.00

D47 Drill Bits 2001631788 BIT DRL PDC REG SB S123 17" B-5 C-16 EA 2.00

D48 Drill Bits 2001631789 BIT DRL TCR 115 17" IN EA 3.00

E1 Other Consumables Bars/Rods 2000263068 BAR RND MTL RIBB/TWIST MS IS1786 25MM MT 66.70

E2 Other Consumables Bars/Rods 2000408831 STRIPFLAT;MOC:COPER,SIZ:32X6MM,F BUSBAR KG 2,500.00

E3 Other Consumables Cable 2001042152 CBL ARM FRLS 19/33KV AL XLPE 3C 240MM2 M 1,038.00

E4 Other Consumables Cable 2001057277 CBL ARM FRLS 0.65/1.1 CU PVC 3C 2.5MM2 M 33,693.00

E5 Other Consumables Cable 2001057640 CBL ARM FRLS 0.65/1.1 CU PVC 7C 2.5MM2 M 4,053.00

E6 Other Consumables Cable 2001090406 CBL ARM FR 650/1100V AL XLPE 3.5C 240MM M 11,757.00

E7 Other Consumables Cable 2001406078 CBL N-ARM FRLS 1.1KV CU PVC 1C 4MM2 GREE M 22,620.00

E8 Other Consumables Cable 2001527484 CBL ARM FRLS 1.1KV AL XLPE 3.5C 120MM2 M 1,000.00

E9 Other Consumables Cable 2001619450 CBL ARM FR 300 VRMS COPPER XLPE 10PR 1.5 M 7,266.00

E10 Other Consumables Cable 2001619462 CBL ARM FR 300 VRMS CU XLPE 19C 2.5MM2 M 2,545.00

E11 Other Consumables Cable 2001619477 CBL ARM FRLS 300 VRMS CU XLPE 19C 4MM2 M 2,015.00

E12 Other Consumables Cable 4000148186 19 CORE * 4.0 MM2 NON I.S. C2.1, FACTORY KM 1.02

E13 Other Consumables Cable 4000190462 19C X 4.0 MM2,NON I.S.,C2.1,XLPE. PVC. S M 1,039.00

E14 Other Consumables Fittings 2000306093 TEE EQ BW WPB-W STD 24" EA 16.00

E15 Other Consumables Fittings 2000306144 ELB THD A105N GALV 90DEG CL3000 2" EA 481.00

E16 Other Consumables Fittings 2000308955 TEE RED SW A105N CL6000 1.5"X0.75" EA 587.00

E17 Other Consumables Fittings 2000309397 ELB BW WPB-W 90DEG LR XS 30" EA 5.00

E18 Other Consumables Fittings 2001013232 ELB BW WPB 90DEG LR STD 14" EA 180.00

E19 Other Consumables Fittings 2001126372 ELB BW WP316 90DEG LR NACE 40S 10" EA 15.00

E20 Other Consumables Fittings 2001126382 TEE EQ BW A403-WP316 NACE 40S 10" EA 16.00

E21 Other Consumables Fittings 2001127559 ELB BW A234-WPBW 90DEG LR 1.125"WT 42" EA 12.00

E22 Other Consumables Fittings 2001128248 TEE RED BW A234-WPBW SCH40 X XS 24"X14" EA 15.00

E23 Other Consumables Fittings 2001128251 TEE RED BW A234-WPBW XS X STD 30"X14" EA 10.00

E24 Other Consumables Fittings 2001152321 ELBBW A860WPHY65 90DEGLR NACESCH100 12" EA 50.00

E25 Other Consumables Fittings 2001152353 TEE EQ BW A860-WPHY65 NACE SCH100 12" EA 10.00

E26 Other Consumables Fittings 2001152355 TEE RED BW A420-L6NACE SCH140X XS 12"X8" EA 15.00

E27 Other Consumables Fittings 2001152828 ELB BW A420-WPL6 90DEGLR NACE SCH140 12" EA 15.00

E28 Other Consumables Fittings 2001152842 ELB BW A420-WPL6 90DEG LR NACE SCH20 16" EA 24.00

E29 Other Consumables Fittings 2001152892 TEE RED BW A420-WPL6 46X30MMWT 10"X6" EA 6.00


Sl.


Available

Qty

Required

Qty (A)

Unit Price

Quoted (B)

Total Amount

Quoted (A*B)

E30 Other Consumables Fittings 2001153175 ELB BW A860WPHY65 90DEG LR NACE 42MM 36" EA 12.00

E31 Other Consumables Fittings 2001153176 ELB BW WPHY65 45DEG LR NACE 27MM WT 30" EA 8.00

E32 Other Consumables Fittings 2001153177 ELB BW A860-HY65 45DEG LR NACE22.2MM 36" EA 5.00

E33 Other Consumables Fittings 2001153187 ELB GRE 90 DEG DN 350 EA 15.00

E34 Other Consumables Fittings 2001153224 REC BW A860WPHY65 NACE 30.2X27MM 36"X30" EA 7.00

E35 Other Consumables Fittings 2001153226 REE BW WPHY65 NACE 48X34MMWT 36"X24" EA 3.00

E36 Other Consumables Fittings 2001153227 REE BW A860WPHY65 NACE 36X25.4MM 30"X24" EA 5.00

E37 Other Consumables Fittings 2001153237 TEE RED BW A860WPHY65NACE44X36MM 48"X30" EA 4.00

E38 Other Consumables Fittings 2001153239 TEE RED BW A860HY65NACE38X22.2MM 48"X24" EA 2.00

E39 Other Consumables Fittings 2001153240 TEE RED BW A860WPHY65NACE44X34MM 48"X36" EA 1.00

E40 Other Consumables Fittings 2001153546 ELB BW A420-WPL6 90DEGLR NACE SCH140 14" EA 20.00

E41 Other Consumables Fittings 2001153611 TEE RED BW A420-WPL6 46X20MMWT 10"X4" EA 6.00

E42 Other Consumables Fittings 2001154132 TEE EQ BW A420-WPL6 NACE SCH140 14" EA 7.00

E43 Other Consumables Fittings 2001154180 BRF BW WLDT CS NACE 120 X 44MM 10"X48" EA 9.00

E44 Other Consumables Fittings 2001154397 SWG ECC A420L6 BLE/PSE NACE S160 2"X1.5" EA 125.00

E45 Other Consumables Fittings 2001154453 CAP BW A860WPHY65 NACE 44 MMWT 48" EA 3.00



E48 Other Consumables Fittings 2001154461 ELB BW A403-WP316WX 90DEG LR NACE XS 24" EA 2.00

E49 Other Consumables Fittings 2001154465 ELB BW A403-316 90DEG LR NACE SCH120 10" EA 10.00

E50 Other Consumables Fittings 2001154508 REC BW A403-WP316 NACE SCH100X120 12"X6" EA 5.00

E51 Other Consumables Fittings 2001154510 REE BW A403-316WX NACE XS X 80S 16"X12" EA 15.00

E52 Other Consumables Fittings 2001154514 REE BW A403-316WX NACE SCH160 20"X18" EA 4.00


E54 Other Consumables Fittings 2001154516 TEE EQ BW A860WPHY65 NACE 38MM WT 48" EA 4.00

E55 Other Consumables Fittings 2001154523 TEE EQ BW A403-WP316-WX NACE XS 18" EA 4.00

E56 Other Consumables Fittings 2001154524 TEE RED BW A860HY65 NACE 38X27MM 48"X30" EA 2.00

E57 Other Consumables Fittings 2001154525 TEE RED BW A860HY65NACE34MMXS100 36"X16" EA 5.00

E58 Other Consumables Fittings 2001154789 ELB BW A403-316WX 90DEGLR NACE SCH30 30" EA 1.00

E59 Other Consumables Fittings 2001154790 ELB BW WP316WX 90DEG LR NACE XS 20" EA 15.00

E60 Other Consumables Fittings 2001154791 ELB BW A403-316WX 90DEGLR NACE SCH60 20" EA 2.00

E61 Other Consumables Fittings 2001154793 ELB BW WP316WX 90DEG LR NACE XS 16" EA 6.00

E62 Other Consumables Fittings 2001154795 ELB BW A403-WP316 90DEG LR NACE 80S 8" EA 7.00

E63 Other Consumables Fittings 2001154815 REC BW A403-316WX NACE SCH160 20"X12" EA 4.00

E64 Other Consumables Fittings 2001154825 REE BW A403WP316NACE SCH160 X XXS 10"X6" EA 5.00

E65 Other Consumables Fittings 2001154829 TEE EQ BW A403-WP316 NACE SCH120 10" EA 10.00

E66 Other Consumables Fittings 2001154833 TEE EQ BW A403-316WX NACE SCH60 20" EA 2.00

E67 Other Consumables Fittings 2001154835 TEE RED BW WP316WXNACE SCH30X80S 30"X10" EA 5.00

E68 Other Consumables Fittings 2001154837 TEE RED BW A403-316WX NACE XSX80S 18"X8" EA 23.00

E69 Other Consumables Fittings 2001154839 TEE RED BW A403-316WX NACEXSX80S 20"X10" EA 6.00


Sl.


Available

Qty

Required

Qty (A)

Unit Price

Quoted (B)

Total Amount

Quoted (A*B)

E70 Other Consumables Fittings 2001154841 TEE RED BW A403-316WX NACE XSX80S18"X10" EA 3.00

E71 Other Consumables Fittings 2001154842 TEE RED BW A403-WP316WX NACE XS 20"X16" EA 2.00

E72 Other Consumables Fittings 2001154852 FLG WN A105N RF CL300 1.125"THK 42" EA 4.00

E73 Other Consumables Fittings 2001154856 FLG WN F65 RF CL600 NACE 38MMWT 48" EA 4.00



E76 Other Consumables Fittings 2001155115 ELB BW A403-WP316 90DEG LR NACE 80S 10" EA 4.00

E77 Other Consumables Fittings 2001155163 REC BW A403-WP316NACE SCH160X XXS 10"X4" EA 8.00

E78 Other Consumables Fittings 2001155166 REE BW A403-316WXNACE1.25"XSCH80 30"X24" EA 2.00


E80 Other Consumables Fittings 2001155169 REE BW A403-316WX NACE SCH60X XS 20"X16" EA 4.00

E81 Other Consumables Fittings 2001155172 REE BW A403-316WX NACE SCH60X XS 20"X18" EA 5.00

E82 Other Consumables Fittings 2001155180 TEE EQ BW A403-WP316WX NACE 19.05MM 42" EA 1.00

E83 Other Consumables Fittings 2001155181 TEE EQ BW A403-WP316-WX NACE XS 42" EA 1.00

E84 Other Consumables Fittings 2001155184 TEE RED BW A403-WP316 NACE 80S 12" X 6" EA 4.00


E86 Other Consumables Fittings 2001155186 TEE RED BW WP316WX NACE .75"X XS 42"X16" EA 3.00



E89 Other Consumables Fittings 2001155189 TEE RED BW A403-316 NACE.75"XS30 42"X30" EA 1.00


E91 Other Consumables Fittings 2001155629 CAP BW A403-WP316 NACE 19.05MM 42" EA 1.00


E93 Other Consumables Fittings 2001155631 ELB BW A403-316WX 90DEG LR NACE XS 48" EA 2.00

E94 Other Consumables Fittings 2001155684 REE BW A403-316WX NACE XS 48" X 42" EA 2.00

E95 Other Consumables Fittings 2001158086 REE BW A860-HY65NACE 22.2X SCH80 24"X16" EA 2.00

E96 Other Consumables Fittings 2001161633 TEE EQ BW A403-316WX NACE 40S 16" EA 6.00

E97 Other Consumables Fittings 2001162336 TEE RED BW A403-316WX NACE 40S 16" X 10" EA 6.00


E99 Other Consumables Fittings 2001162492 BRF BW ELBLT A182-F316 NACE 10S 4"X10" EA 60.00

E100 Other Consumables Fittings 2001162551 TEE EQ BW A403-WP316 NACE 10S 10" EA 15.00


E102 Other Consumables Fittings 2001163068 ELB BW WPHY65 90DEG LR NACE 28.6MM 26" EA 8.00

E103 Other Consumables Fittings 2001163115 TEE RED BW A420WPL6W NACE STDX20 18"X12" EA 7.00

E104 Other Consumables Fittings 2001163419 REE BW A860WPHY65 NACE 22.2X19.1 24"X20" EA 2.00

E105 Other Consumables Fittings 2001165755 ELB BW A403-316WX 90DEG LR NACE 10S 30" EA 2.00

E106 Other Consumables Fittings 2001165768 REC BW A403-316WX NACE SCH160 24"X16" EA 3.00

E107 Other Consumables Fittings 2001165773 REE BW A403-316WXNACE SCH80 X100 20"X16" EA 2.00




Sl.


Available

Qty

Required

Qty (A)

Unit Price

Quoted (B)

Total Amount

Quoted (A*B)

E110 Other Consumables Fittings 2001166266 TEE RED BW WP316WXNACE SCH60X80S 20"X10" EA 2.00

E111 Other Consumables Fittings 2001173995 ELB T/P HDPE-PE100 45DEG SDR11 OD 50MM EA 12.00

E112 Other Consumables Fittings 2001174297 ELB T/P HDPE-PE100 90DEG SDR11 OD500MM EA 15.00

E113 Other Consumables Fittings 2001174602 TEE RED T/P HDPE-PE100 SDR11 OD500X225MM EA 6.00

E114 Other Consumables Fittings 2001174603 TEE RED T/P HDPE-PE100 SDR11 OD500X280MM EA 6.00

E115 Other Consumables Fittings 2001180657 TEE RED BW A420-WPL6NACE SCH20XSTD10"X6" EA 17.00

E116 Other Consumables Fittings 2001180663 REC BW A860WPHY65 NACE 27X22.2MM 30"X24" EA 2.00

E117 Other Consumables Fittings 2001180667 REE BW A420-WPL6 NACE SCH80 10" X 4" EA 15.00

E118 Other Consumables Fittings 2001196717 ELB BW S31254-WX 90DEG LR NACE 10S 16" EA 7.00

E119 Other Consumables Fittings 2001209911 ELB BW -- DEG.90 LR NACE 10S 10" EA 10.00

E120 Other Consumables Fittings 2001209914 REC BW -- NACE 10S 10"X8" EA 14.00

E121 Other Consumables Fittings 2001224505 LATR TEE HDPE PE100 45DEG SDR11 160MMOD EA 68.00

E122 Other Consumables Fittings 2001231321 CPL TH RED TBE A105N CL3000 1"X0.5" EA 1,071.00

E123 Other Consumables Fittings 2001244854 ELB THD A105N GALV 90DEG CL3000 3" EA 179.00

E124 Other Consumables Fittings 2001244855 TEE EQ THD A105N GAL NPT CL3000 2" EA 518.00

E125 Other Consumables Fittings 2001250481 CPL TH TBE A105N GALV CL3000 3" EA 149.00

E126 Other Consumables Fittings 2001253471 REC TH CS A105N FNPT CL3000 -- 3"X2" EA 90.00

E127 Other Consumables Fittings 2001257541 ELB BW WPHY65 45DEG LR NACE 36MM WT 30" EA 2.00

E128 Other Consumables Fittings 2001265082 TEE EQ BW A403-WP316-WX NACE SCH30 30" EA 1.00

E129 Other Consumables Fittings 2001599648 ELB BW WPHY65 90DEG LR NACE 19.1MM 20" EA 17.00

E130 Other Consumables Fittings 2001628609 BRF BW WLDT F65 NACE 19.1MM/S80 20"X8" EA 18.00

E131 Other Consumables Flanges 2000302461 FLG WN A105N RF CL150 -- -- STD 24'' EA 29.00

E132 Other Consumables Flanges 2000302719 FLG WN A105N RF CL300 - - S40 24" EA 16.00

E133 Other Consumables Flanges 2000302949 FLG WN A105N RF CL300 - - XS 14" EA 34.00

E134 Other Consumables Flanges 2000308084 FLG BLIND A105N RF CL150 NACE 24" EA 15.00

E135 Other Consumables Flanges 2001154151 FLG WN F65 RF CL600 NACE 14.3MMWT 18" EA 12.00

E136 Other Consumables Flanges 2001154846 FLG BLIND A694-F65 CL1500 NACE 36" EA 3.00

E137 Other Consumables Flanges 2001154853 FLG WN F65 RTJ CL900 NACE 42TH 36" EA 25.00

E138 Other Consumables Flanges 2001155194 FLG WN F65 RF CL600 NACE 22.2MMWT 36" EA 3.00

E139 Other Consumables Flanges 2001155718 FLG WN A350-LF6-2 RTJ CL2500 1.181"WT 6" EA 26.00

E140 Other Consumables Flanges 2001155723 FLG WN A350-LF2N RTJ CL900 NACE S140 14" EA 30.00

E141 Other Consumables Flanges 2001155729 FLG WN A350-LF6-2 RTJCL2500NACE 46MM 10" EA 11.00

E142 Other Consumables Flanges 2001155732 FLG WN F65 RTJ CL1500 NACE S100 12" EA 8.00

E143 Other Consumables Flanges 2001155733 FLG WN F65 IX-NCF5 CL1500 NACE 48T 36" EA 1.00

E144 Other Consumables Flanges 2001155735 FLG WN A350-LF2N RF CL600 NACE SCH80 10" EA 39.00

E145 Other Consumables Flanges 2001162561 FLG WN F316 IX-NCF5 CL2500 NACE S160 20" EA 1.00

E146 Other Consumables Flanges 2001162878 BLD SPADE A240-316 RF NACE CL150 12" EA 133.00

E147 Other Consumables Flanges 2001162887 FLG WN F316 RF CL300 NACE 80S 10" EA 10.00

E148 Other Consumables Flanges 2001162889 FLG WN F316 RTJ CL2500 NACE XXS 4" EA 12.00



Sl.


Available

Qty

Required

Qty (A)

Unit Price

Quoted (B)

Total Amount

Quoted (A*B)


E151 Other Consumables Flanges 2001162913 SPACER RT A240-316 NACE CL150 RF 12" EA 133.00

E152 Other Consumables Flanges 2001162914 RING,BLEED,A182-F316,CL1500,RTJ,NACE,2" EA 122.00

E153 Other Consumables Flanges 2001162916 RING,BLEED,SS316,CL600,RF,NACE,2" EA 101.00

E154 Other Consumables Flanges 2001163448 FLG WN F316 RF CL150 NACE 0.75"WT 42" EA 6.00

E155 Other Consumables Flanges 2001163449 FLG WN F316 RF CL150 NACE XS 42" EA 18.00

E156 Other Consumables Flanges 2001163452 FLG WN F316 RTJ CL1500 NACE 80S 12" EA 5.00


E158 Other Consumables Flanges 2001163456 FLG WN F316 IXNCF5 CL2500 NACE S160 18" EA 1.00

E159 Other Consumables Flanges 2001163457 FLG WN F316 IXNCF5 CL2500 NACE S160 24" EA 1.00




E163 Other Consumables Flanges 2001163462 FLG WN F316 RF CL600 NACE SCH30 30" EA 8.00





E168 Other Consumables Flanges 2001163478 FLG WN F316 RTJ CL900 NACE SCH120 10" EA 23.00

E169 Other Consumables Flanges 2001163480 FLG WN F316 RTJ CL900 NACE 1.25" WT 30" EA 1.00

E170 Other Consumables Flanges 2001164795 RING,BLEED,A350-LF2N,CL600,RF,NACE,2" EA 6.00

E171 Other Consumables Flanges 2001166968 FLG WN F316 RTJ CL900 NACE SCH30 30" EA 1.00

E172 Other Consumables Flanges 2001166971 FLG WN A105N RF CL600 - - S40 18" EA 8.00


E174 Other Consumables Flanges 2001175083 FLG WN F65 RTJ CL1500 NACE 14.3MMWT 18" EA 3.00

E175 Other Consumables Flanges 2001175085 FLG WN F65 RTJ CL1500 NACE 34MMWT 24" EA 2.00

E176 Other Consumables Flanges 2001179341 FLG BLIND F316 RF CL150 NACE 24" EA 6.00

E177 Other Consumables Flanges 2001179670 FLG SET ORF A105N RF CL300 XS 16" PAA 9.00


E179 Other Consumables Flanges 2001185645 FLG WN A182-F44 RF CL150 NACE 10S 16" EA 3.00




E183 Other Consumables Flanges 2001192927 FLG BLIND F65 RTJ CL900 NACE 26" EA 4.00

E184 Other Consumables Flanges 2001192933 FLG WN A350LF2N RTJ CL900 NACE SCH120 8" EA 28.00

E185 Other Consumables Flanges 2001198303 FLG WN F65 RTJ CL900 NACE 27MMWT 30" EA 17.00

E186 Other Consumables Flanges 2001198306 FLG WN A350-LF6-2 RTJ CL2500 38MMWT 8" EA 9.00


E188 Other Consumables Flanges 2001629505 FLG WN A694-F65 RTJ CL1500 NACE S140 12' EA 6.00

E189 Other Consumables Flanges 2001630595 FLG WN A694-F65 RTJ CL1500 NACE S140 24" EA 3.00


Sl.


Available

Qty

Required

Qty (A)

Unit Price

Quoted (B)

Total Amount

Quoted (A*B)

E190 Other Consumables Gasket 2001165070 GSKT SW FLX.GRP CS SS316L SS CL600 30" EA 199.00

E191 Other Consumables Gasket 2001177908 GSKT RJ SOFT IRON OVAL CL1500 18" EA 136.00

E192 Other Consumables Gasket 2001180067 GSKT RJ SS OCTAL CL600 -- 6" EA 74.00

E193 Other Consumables Gasket 2001180109 GSKT FLR NON ASB GR 1.5MM CL150 30" EA 115.00

E194 Other Consumables Gasket 2001180272 GSKT - IX TYPE SEAL RING ALLOY 625 20" EA 6.00

E195 Other Consumables Gasket 2001184934 GSKT SW -- -- -- -- CL 150 16" EA 92.00

E196 Other Consumables Network Accsry 2000711626 SC-SC COUPLERS;PN:SCTYPX EA 2,000.00

E197 Other Consumables Other miscellaneous 2000727196 CSG X52 RL4S -- 36IN 553PPF M 259.11

E198 Other Consumables Other miscellaneous 2001001669 BAND DRAIN-MEBRA DRAIN MD88-HD,W-100MM M 21,000.00

E199 Other Consumables Other miscellaneous 2001087557 GAUGE MNDRL,9.5/8"VTPXP SOLID,UPR GAUGE EA 3.00

E200 Other Consumables Other miscellaneous 2001087588 METALLIC CROSS CPL CBL PROTR-9.5/8",VT EA 1,013.00

E201 Other Consumables Other miscellaneous 2001153878 PUROLATOR POROMAX II SAND EXCL SCREEN,7" EA 16.00

E202 Other Consumables Other miscellaneous 2001166781 CTRL LINE F/CHEM INJECTION WELDED 3/8" M 6,562.00

E203 Other Consumables Other miscellaneous 2001237733 PES ®HE3 RBP 10 3/4" 60.7-65.7# EA 1.00

E204 Other Consumables Other miscellaneous 2001263063 RING SEAT, PN:R02241720031R6 EA 2.00

E205 Other Consumables Other miscellaneous 2001306603 BATT PCK "C" -- -- -- -- -- EA 65.00

E206 Other Consumables Other miscellaneous 2001743409 CSG Q125 VAMFJL R3 9.625" 53.50 M 880.94

E207 Other Consumables Other miscellaneous 4000101188 NPB 500X200X90.7 MT 15.21

E208 Other Consumables Other miscellaneous 4000101527 GEOBAGS MADE FROM TFI 5200 GEOTEXTILE EA 5,012.00

E209 Other Consumables Other miscellaneous 4000137426 450(W) X 127(H)-2MM THK,3M LONG LADR RAC M 2,340.00

E210 Other Consumables Other miscellaneous 4000137427 750(W) X 127(H) - 2MM THK, 3M LONG - LAD M 2,165.00

E211 Other Consumables Other miscellaneous 4000137460 200(W) X 50(H) X 10(F) - 2MM THK, 2.5M L M 1,080.00

E212 Other Consumables Other miscellaneous 4000137461 300(W) X 50(H) X 10(F) - 2MM THK, 2.5M L M 937.50

E213 Other Consumables Other miscellaneous 4000137468 400 x 400 x 50 Top Outlet Box SS Cover EA 174.00

E214 Other Consumables Other miscellaneous 4000138016 10/2 TON X 19 MTR. SPAN, D/G EOT CRANE F EA 2.00

E215 Other Consumables Other miscellaneous 4000138020 FOR 10 TON D/G EOT CRANES ST 8.00

E216 Other Consumables Other miscellaneous 4000138021 FOR 5 TON D/G EOT CRANES ST 5.00

E217 Other Consumables Other miscellaneous 4000148582 PERFORATED TYPE CABLE TRAY ? 50MM WIDE F M 8,770.00

E218 Other Consumables Other miscellaneous 4000148618 200MM WID (RADIUS 450MM) 90 DEG - HORIZO EA 625.00

E219 Other Consumables Other miscellaneous 4000148619 150MM WIDE( RADIUS 450MM) 90 DEG - HORIZ EA 824.00

E220 Other Consumables Other miscellaneous 4000148620 100MM WIDE (RADIUS 450MM) 90 DEG - HORIZ EA 1,240.00

E221 Other Consumables Other miscellaneous 4000148622 50MM WIDE (RADIUS 450MM) 90 DEG - HORIZO EA 2,480.00

E222 Other Consumables Other miscellaneous 4000148639 200MM WIDE (RADIUS 450MM) 90 DEG - INSID EA 626.00

E223 Other Consumables Other miscellaneous 4000148640 150MM WIDE (RADIUS 450MM) 90 DEG - INSID EA 860.00

E224 Other Consumables Other miscellaneous 4000148641 100MM WIDE (RADIUS 450MM) 90 DEG - INSID EA 1,240.00

E225 Other Consumables Other miscellaneous 4000148643 50MM WIDE (RADIUS 450MM) 90 DEG - INSIDE EA 2,380.00

E226 Other Consumables Other miscellaneous 4000148773 COVER FOR PERFORATED TYPE CABLE TRAY- 5 M 5,077.00

E227 Other Consumables Other miscellaneous 4000148906 200MM WIDE (RADIUS 450MM) 90 DEG - OUTSI EA 610.00

E228 Other Consumables Other miscellaneous 4000148907 150MM WIDE (RADIUS 450MM) 90 DEG - OUTSI EA 962.00

E229 Other Consumables Other miscellaneous 4000148908 100MM WIDE (RADIUS 450MM) 90 DEG - OUTSI EA 1,240.00


Sl.


Available

Qty

Required

Qty (A)

Unit Price

Quoted (B)

Total Amount

Quoted (A*B)

E230 Other Consumables Other miscellaneous 4000148910 50MM WIDE (RADIUS 450MM) 90 DEG - OUTSID EA 2,380.00

E231 Other Consumables Other miscellaneous 4000153520 1A FCP-6000/C / AL(LM6) FLAMEPROOF EA 10.00

E232 Other Consumables Other miscellaneous 4000173284 L8-ARTILITE MAKE GROUND BURIAL LIGHT (WA EA 93.00

E233 Other Consumables Other miscellaneous 4000173286 L9-ARTILITE MAKE GROUND BURIAL LIGHT (DR EA 49.00

E234 Other Consumables Other miscellaneous 4000178816 JUNCTION BOX FOR MULTISENSOR DETECTOR A EA 1,100.00

E235 Other Consumables Other miscellaneous 4000178817 SS CABLE GLANDS FOR MULTISENSOR DETECT EA 1,636.50

E236 Other Consumables Other miscellaneous 4000190572 1-W-80-076, 10TON X 16 MTR LIFT, ELECTRI EA 1.00

E237 Other Consumables Other miscellaneous 4000193111 SPECIAL TOOLS FOR VSD PANEL ST 1.00

E238 Other Consumables Other miscellaneous 4000201000 A29-LIGHTCRAFT - WALKY STEPLIGHT 9W LED EA 98.00

E239 Other Consumables Other miscellaneous 4500214466 GRATINGS;THICKNESS : 30 MM M2 1,615.40

E240 Other Consumables Stud Bolts 2001163570 STDBLT+N B7 2H UNC 0.625" 3.500" EA 39,297.00

E241 Other Consumables Stud Bolts 2001163983 STDBLT+N B7 2H UNC 0.750" 4.000" EA 4,496.00

E242 Other Consumables Stud Bolts 2001164729 STDBLT+N L7M 7ML UNC 0.625" 4.250" EA 20,316.00

E243 Other Consumables Stud Bolts 2001164750 STDBLT+N L7M 7ML UNC 0.875" 5.875" EA 7,214.00

E244 Other Consumables Stud Bolts 2001165427 STDBLT+N L43 7L 8UN 2.750" 24.250" EA 314.00

E245 Other Consumables Stud Bolts 2001165428 STDBLT+N L7M 7ML 8UN 2.000" 16.125" EA 7,540.00

E246 Other Consumables Stud Bolts 2001165429 STDBLT+N L7M 7ML 8UN 2.000" 21.625" EA 265.00


E248 Other Consumables Stud Bolts 2001165431 STDBLT+N B7 2H 8UN 1.250" 9.000" EA 1,458.00









E257 Other Consumables Stud Bolts 2001168260 STDBLT+N L7M 7ML 8UN 2.500" 18.250" EA 1,372.00






E263 Other Consumables Stud Bolts 2001168500 STDBLT+N L43 7L 8UN 2.750" 23.625" EA 2,332.00








Sl.


Available

Qty

Required

Qty (A)

Unit Price

Quoted (B)

Total Amount

Quoted (A*B)




E273 Other Consumables Valves 2001076413 VL BASF RB 150 RF WCB SS316 NACE G 12" EA 3.00

E274 Other Consumables Valves 2001081642 VL BASF RB 300 RF CF8M SS316 NACE G 10" EA 2.00


E276 Other Consumables Valves 2001128976 VL BASF FB 2500 RTJ CF8M SS316 NACE L 2" EA 10.00

E277 Other Consumables Valves 2001128979 VL BAMF RB 900 RTJ CF8M SS316 NACE G 4" EA 6.00

E278 Other Consumables Valves 2001128981 VL BAMF RB 900 RTJ CF8M SS316 NACE L 3" EA 3.00

E279 Other Consumables Valves 2001151006 VL CDM LUG RTJ 1500 LCC SS316 NACE 36" EA 1.00

E280 Other Consumables Valves 2001151502 VL GWBF 150 RF WCB T8 G 20" EA 3.00

E281 Other Consumables Valves 2001151923 VL GWBF 600 RF LCC T10 NACE H 2" EA 48.00

E282 Other Consumables Valves 2001151925 VL GWBF 900 RTJ LCC T10 NACE H 2" EA 21.00

E283 Other Consumables Valves 2001151926 VL GWBF 2500 RTJ LCC T10 H 2" EA 9.00

E284 Other Consumables Valves 2001151930 VL GWBF 1500 RTJ LCC T10 NACE H 2" EA 7.00

E285 Other Consumables Valves 2001151931 VL GWBF 600 RF LCC T10 NACE H 2" EA 21.00

E286 Other Consumables Valves 2001151934 VL GPBF 2500 RTJ LCC T10 H 2" EA 5.00

E287 Other Consumables Valves 2001152365 VL BASF RB 600 RF LCC SS316 NACE G 48" EA 1.00


E289 Other Consumables Valves 2001152369 VL GWBF 900R RTJ LCC T10 NACE H 2" EA 31.00

E290 Other Consumables Valves 2001152376 VL GPBF 900 RTJ LCC T10 NACE H 2" EA 7.00

E291 Other Consumables Valves 2001152910 VL BAMF RB 1500 RTJ LCC SS316 NACE G 10" EA 7.00

E292 Other Consumables Valves 2001152911 VL BASF FB 2500 RTJ LCC SS316 L 2" EA 5.00

E293 Other Consumables Valves 2001152913 VL BASF FB 1500 RTJ LCC SS316 NACE L 2" EA 21.00



E296 Other Consumables Valves 2001154159 VL BASF FB 150 RF WCB SS316 L 2" EA 73.00

E297 Other Consumables Valves 2001154868 VL BAMF FB 1500 RTJ LCC SS316 NACE L 2" EA 5.00

E298 Other Consumables Valves 2001155213 VALVES,BALL;MOC:CS;CL900;SIZE:2" EA 6.00

E299 Other Consumables Valves 2001155214 VL BASF RB 2500 RTJ LCC SS316 G 6" EA 7.00





E304 Other Consumables Valves 2001156317 BAFLSF RB CL600 CS 316 2" EA 16.00

E305 Other Consumables Valves 2001156564 VL GWBF 2500 RTJ LCC T10 H 1" EA 26.00

E306 Other Consumables Valves 2001156565 VL GWBF 1500 RTJ LF2 T10 NACE H 0.75" EA 47.00

E307 Other Consumables Valves 2001164661 NDL VA A350-LF2 6000PSI SW/FNPT SZ:0.75" EA 101.00

E308 Other Consumables Valves 2001165326 NDL VA DBB A105N 300LB RFXFNPT MTL SH 2" EA 38.00



Sl.


Available

Qty

Required

Qty (A)

Unit Price

Quoted (B)

Total Amount

Quoted (A*B)

E310 Other Consumables Valves 2001165463 VL GWBF 1500 RTJ CF8M T10 NACE H 2" EA 6.00

E311 Other Consumables Valves 2001165493 VALVES,BALL;MOC:CS;CL600;SIZE:0.5" EA 38.00

E312 Other Consumables Valves 2001166575 VL BAMF RB 600 RF LCC SS316 NACE G 6" EA 12.00






E318 Other Consumables Valves 2001174858 VL CDM LUG RTJ 2500 LCC SS316 6" EA 8.00

E319 Other Consumables Valves 2001174859 VL CDM LUG RF 600 LCC SS316 NACE 48" EA 1.00

E320 Other Consumables Valves 2001174863 VL GPBF 2500 RTJ CF8M T10 NACE G 6" EA 2.00

E321 Other Consumables Valves 2001174865 VL GPBF 300 RF WCB T8 G 16" EA 3.00

E322 Other Consumables Valves 2001175099 VL BAMF FB 1500 RTJ CF8M SS316 NACE L 1" EA 12.00


E324 Other Consumables Valves 2001175102 VL CDM LUG RTJ 900 LCC SS316 NACE 16" EA 3.00

E325 Other Consumables Valves 2001175103 VL CDM WFR RF 300 CF8M SS316 NACE 10" EA 4.00

E326 Other Consumables Valves 2001175109 VL PBMF 150 RF F44 NACE G 16" EA 1.00


E328 Other Consumables Valves 2001180906 NDL VA A105N 6000PSI SW/FNPT SZ:0.75" EA 85.00

E329 Other Consumables Valves 2001181254 VL CDM FLG RF 300 WCB SS316 14" EA 5.00


E331 Other Consumables Valves 2001181259 VL CDM FLG RF 150 WBC SS316 12" EA 5.00





E336 Other Consumables Valves 2001182183 VL BASF FB 150 RF WCB SS316 NACE G 10" EA 2.00

E337 Other Consumables Valves 2001182378 VALVE,NEEDLE,A350 LF2,CL 600, RF SZ:2" EA 48.00

E338 Other Consumables Valves 2001182483 VL BASFRB 16.47A 600 RF LCC 316 NACE 30" EA 1.00

E339 Other Consumables Valves 2001182485 VL BASF FB 150 RF LCC SS316 NACE G 8" EA 2.00

E340 Other Consumables Valves 2001182763 VL BASF FB 1500 RTJ LCC SS316 NACE G 3" EA 7.00



E343 Other Consumables Valves 2001184448 VL BASF RB 1500 RTJ LCC SS316 NACE G 10" EA 11.00

E344 Other Consumables Valves 2001184467 VL GPBF 1500 RTJ LCC T10 NACE H 2" EA 6.00

E345 Other Consumables Valves 2001184722 NDL VA DBB A350 LF2 1500LB RTJ X FNPT 2" EA 19.00



E348 Other Consumables Valves 2001185180 VL BASF RB 900 RTJ LCC SS316 NACE G 4" EA 12.00



Sl.


Available

Qty

Required

Qty (A)

Unit Price

Quoted (B)

Total Amount

Quoted (A*B)


E351 Other Consumables Valves 2001185313 NDL VA DBB A105N 300LB RFXFNPT SZ 0.75" EA 15.00

E352 Other Consumables Valves 2001185314 NDL VA DBB A350 LF2 900LB RTJ M SH 2" EA 5.00

E353 Other Consumables Valves 2001185317 VA NDL DBB A350 LF2 600LB RF M SH SZ:2" EA 31.00





E358 Other Consumables Valves 2001185411 VL BASF FB 1500 RTJ CF8M SS316 NACE L 2" EA 8.00

E359 Other Consumables Valves 2001185412 VL BASF FB 150 RF CF8M SS 316 NACE G 12" EA 3.00

E360 Other Consumables Valves 2001185413 VL BASF RB 900 RTJ CF8M SS316 NACE G 8" EA 11.00

E361 Other Consumables Valves 2001192216 VL CDM LUG RF 600 LCC SS316 NACE 2" EA 3.00

E362 Other Consumables Valves 2001192217 VL GWBF 900 RTJ LCC T10 NACE G 16" EA 3.00



E365 Other Consumables Valves 2001193926 VL GWBF 900 RTJ LCC T10 NACE G 6" EA 12.00

E366 Other Consumables Valves 2001196099 VL GPBF 1500 RTJ CF8M T10 NACE H 1" EA 40.00

E367 Other Consumables Valves 2001204300 VL BASF FB 2500 RTJ LCC SS316 L 3" EA 10.00

E368 Other Consumables Valves 2001204301 VL BASF RB 2500 RTJ LCC SS316 L 3" EA 10.00

E369 Other Consumables Valves 2001204302 VL BASF FB 300 RF CF8M SS316 NACE G 10" EA 2.00


E371 Other Consumables Valves 2001206220 VL BBSS FB 800 A105N SS316 L 1.5" EA 115.00

E372 Other Consumables Valves 2001208899 VL GPBF 150 RF F44 NACE H 14" EA 1.00



E375 Other Consumables Valves 2001209423 VL BASF FB 900 RTJ LCC SS 316 NACE L 2" EA 15.00

E376 Other Consumables Valves 2001209426 VL BASF FB 150 RF CF8M SS316 NACE G 18" EA 1.00



E379 Other Consumables Valves 2001252011 VL BAMF FB 2500 RTJ CF8M SS316 NACE L 2" EA 2.00




E383 Other Consumables Valves 2001252017 VL BAMF RB 900 RTJ CF8M SS 316 NACE L 3" EA 5.00


E385 Other Consumables Valves 2001252349 VL GPBS 800 A105N T8 H 1.5" EA 120.00

E386 Other Consumables Valves 2001350791 VL BASF FB 150 RF CF8M NACE G 10" EA 2.00

F1 Pipes 2000269626 PIPE CS A106-B SMLS BBE S40 10" M 3,197.58

F2 Pipes 2000301328 PIPE CS A106-B SMLS BBE S120 12" M 209.27

F3 Pipes 2000301548 PIPE CS A106-B SMLS BBE NACE S80 8" M 674.90


Sl.


Available

Qty

Required

Qty (A)

Unit Price

Quoted (B)

Total Amount

Quoted (A*B)

F4 Pipes 2000888752 PIPE SS 316-3 EFW BBE NACE S160 24" M 12.00

F5 Pipes 2001127609 PIPE CS CC60-12 EFW BBE STD 18" M 2,598.75

F6 Pipes 2001127610 PIPE CS CC60-12 EFW BBE S20 20" M 436.64

F7 Pipes 2001128889 PIPE CS 5L-X65 SAW BBE NACE 22.2MM 24" M 37.45


F9 Pipes 2001128894 PIPE CS 5L-X65 SAW BBE NACE 36MM 30" M 294.32



F12 Pipes 2001128952 PIPE CS CC60-12 EFW BBE NACE STD 18" M 1,072.42


F14 Pipes 2001128956 PIPE CS CC60-22 EFW BBE 22.23MM 30" M 108.54

F15 Pipes 2001128957 PIPE CS CC60-22 EFW BBE 28.58MM 42" M 241.14

F16 Pipes 2001128963 PIPE CS A333-6 SMLS BBE NACE S100 16" M 168.45

F17 Pipes 2001129640 PIPE SS TP316 SMLS BBE NACE 40S 10" M 84.94


F19 Pipes 2001164793 PIPE 316-3 EFW BBE NACE 19.05MM 42" M 26.95



F22 Pipes 2001165448 PIPE SS TP316 SMLS BBE NACE S160 2" M 394.63


F24 Pipes 2001165798 PIPE SS 316-3 EFW BBE NACE XS 42" M 117.93

F25 Pipes 2001169220 PIPE CS A333-6 SMLS BBE 30MM 6" M 219.86

F26 Pipes 2001169221 PIPE CS A333-6 SMLS BBE 46MM 10" M 105.91

F27 Pipes 2001175347 PIPE 316-3 EFW BBE NACE XS 16" M 113.74

F28 Pipes 2001175350 PIPE SS 316-3 EFW BBE NACE XS 18" M 94.13


F30 Pipes 2001181246 PIPE SS 316-3 EFW BBE NACE 80S 20" M 11.00




F34 Pipes 2001183331 PIPE CS A333-6 SMLS BBE NACE S140 14" M 97.88


F36 Pipes 2001195549 PIPE 316-3 EFW BBE NACE 31.75MM 30" M 4.65




F40 Pipes 2001222837 PIPE A53-B-S GALV SMLS T&C S160 2" M 2,509.74

F41 Pipes 2001222838 PIPE CS A53-B GAL SMLS T&C S80 3" M 2,692.94


G1 Sand Control 2000502727 EXTENSION,CSG MILLOUT,P110,10FT L EA 14.00


Sl.


Available

Qty

Required

Qty (A)

Unit Price

Quoted (B)

Total Amount

Quoted (A*B)

G2 Sand Control 2000646353 EXTENSION,SEAL BORE,190-47 HPHTX20 FT EA 42.00

G3 Sand Control 2000646360 PACKING UNIT,V-RYTE,190-47;PN:H027222400 EA 24.00

G4 Sand Control 2000646361 TOOL,HYDR. SETTING,MODEL J,20" EA 9.00

G5 Sand Control 2000671541 EXTENSION,SEAL BORE,80-40,20FT EA 24.00

G6 Sand Control 2001054744 BLANK PIPE, 6.875" 20' LG F/EXP SCREEN EA 56.00

G7 Sand Control 2001060993 PACKER 7" ID-3.88" 29-32# 5" 24.1# NVB EA 7.00

G8 Sand Control 2001087605 SEAL BORE PACKER,10 3/4" SC-2, 7.5K EA 30.00

G9 Sand Control 2001087624 SEAL BORE PACKER, 7" FB-3, 15K EA 17.00

G10 Sand Control 2001114690 PCKR PROD 7-29.00 VA 13-5/8" 13-5/8" EA 2.00

G11 Sand Control 2001114693 PCKR PROD 51/2-17.00 9.5/8 9.5/8 EA 1.00

G12 Sand Control 2001117027 AUTO LOCATOR ASSY: 9 5/8" EA 8.00

G13 Sand Control 2001117028 PACKER SPACER ASSEMBLY EA 4.00

G14 Sand Control 2001117030 SLEEVE MST CLOSING 9.5/8" X 5.14" EA 8.00

G15 Sand Control 2001117041 BLANK PIPE, 6 5/8" EA 18.00

G16 Sand Control 2001128508 VCA PACKER,13.5/8" X 9.5/8" EA 2.00

G17 Sand Control 2001128518 COMPACTION JT W/CABLE FEED-10.515"OD EA 1.00

G18 Sand Control 2001128519 COMPACTION JT NON FEED THROUGH-9.400"OD EA 3.00

G19 Sand Control 2001128522 PREMIUM SCREENS (RANGE 3 JOINTS):7" 35# EA 61.00

G20 Sand Control 2001128523 BLANK PIPE (RANGE 3 JOINTS) - 7" 35# EA 193.00

G21 Sand Control 2001128527 ISOLATION PLUG-6.22"OD,L-79.39",13CR EA 18.00

G22 Sand Control 2001128531 PES¿ FS1 FLUID SPRG FLUID LOSS CNTRL DEV EA 3.00

G23 Sand Control 2001128533 SACRIFICIAL SCREEN-7.5/8"OD,20FT,VT,13CR EA 17.00

G24 Sand Control 2001157492 EQUALIZER SCRN,W/ EXCLUDER COARSE & ICD EA 311.00

G25 Sand Control 2001157493 PIPE BLANK,5-1/2" 3 5-1/2"17 HYDRIL513 X EA 384.00

G26 Sand Control 2001179233 PES® FS1 FLUID SPRING FLUID LOSS CONTROL EA 1.00

G27 Sand Control 2001215032 PREMIUM SCREEN,POS 1 SLDNG SLEEVE:6 5/8" EA 6.00





G32 Sand Control 2001215040 PREMIUM SCREEN PUP,25FT,MSV POS 4:6 5/8" EA 2.00

G33 Sand Control 2001215041 PREMIUM SCREEN PUP,25FT,MSV POS 5:6 5/8" EA 2.00

G34 Sand Control 2001349022 EXCLUDER 4.5" 2000- 316L SEAL LOCK HT B EA 12.00

G35 Sand Control 2001523464 EXTN SUB,CROSSOVER FOR MULTILATERAL WELL ST 3.00

H1 Surface Prod Inv 4000087766 BEAM,ISMB 600 MT 64.47

H2 Surface Prod Inv 4000089467 MS REBARS TMT 20MM MT 315.49

H3 Surface Prod Inv 4000097785 ISMC 400 MT 58.64

H4 Surface Prod Inv 4000097786 ISA 150X150X16 MT 30.91

H5 Surface Prod Inv 4000098532 ISMB 450 MT 59.66

H6 Surface Prod Inv 4000107122 ISA 130X130X10MM MT 86.79


Sl.


Available

Qty

Required

Qty (A)

Unit Price

Quoted (B)

Total Amount

Quoted (A*B)

H7 Surface Prod Inv 4000168878 WPB 600X300X285 MT 30.99

H8 Surface Prod Inv 4000184751 PIPE,MS,65 NB,76.1 DIA, 4.5 WT M 9,964.00

H9 Surface Prod Inv 4000209172 WALLPAPER NOS 27.00

I1 Wellhead & Accessories 2000502746 EMERGENCY PACKOFF,TYPE SG-5 OR EQUIV EA 7.00

I2 Wellhead & Accessories 2000502749 INDICATOR,SLOPE,0 TO 5 DEG EA 23.00

I3 Wellhead & Accessories 2000642188 GUIDELINELESS REENTRY RETRIVABLE EA 2.00

I4 Wellhead & Accessories 2000672373 GRA (GUIDELINELESS RE-ENTRY RETRIEVABLE EA 2.00

I5 Wellhead & Accessories 2000743641 INDICATOR,SLOPE,ROV RETRIEVABLE,0-5 DEG. EA 16.00

I6 Wellhead & Accessories 2000817248 GUIDE BASE,TEMPORARY,FMC,SUBSEA EA 3.00

I7 Wellhead & Accessories 2000917208 WEAR BUSHING 18-3/4" X 10-3/4",MS-700 EA 28.00

I8 Wellhead & Accessories 2000917606 HNGR,CSG,MS-700,18.3/4 X 10.3/4"VTSCBD EA 21.00

I9 Wellhead & Accessories 2000917609 REDUCED BORE PROTECTOR,18-3/4",MS-700 EA 12.00

I10 Wellhead & Accessories 2000917843 SEAL ASSEMBLY,ANNULUS,18.3/4",SG5 EA 13.00

I11 Wellhead & Accessories 2000945088 HSG SUB,36"X26",MS700,D90/MT BOXUPXPINDN EA 4.00

I12 Wellhead & Accessories 2001044670 HOUSING SUB 36" X 26",R49634-2 EA 4.00

I13 Wellhead & Accessories 2001044748 GUIDELINELESS REENTRY RETRIEVABLE-DMS700 EA 4.00

I14 Wellhead & Accessories 2001045316 HYDRATE/ GAS DEFLECTOR PLATE EA 13.00

I15 Wellhead & Accessories 2001055443 CSG HD XO 18.3/4" 15M NT2 PIN X 20.3/4" EA 2.00

I16 Wellhead & Accessories 2001055444 CSG SPL XO 18.3/4" 15M NT2 PIN X 13.5/8" EA 2.00

I17 Wellhead & Accessories 2001055445 CSG SPL XO 18.3/4" 15M NT2 PIN X 13.5/8" EA 2.00

I18 Wellhead & Accessories 2001055446 BOP XO 18.3/4" 15M NT2 BOX X BX-164 FLNG EA 2.00

I19 Wellhead & Accessories 2001055449 VG SEAL RING F/18.3/4" NT2 FLNG EA 19.00

I20 Wellhead & Accessories 2001075271 LANDING JT 30" C/W RL-4 PXB PN-320209-02 EA 4.00

I21 Wellhead & Accessories 2001075272 CSG ML HNGR 20" C/W PUP JT PN-321146-02 EA 5.00



ANNEXURE 2 FORMAT OF CONTRACT FOR SALE OF MATERIAL

This contract for sale is made and entered into on this ___th day of ___ ____, by and between:

RELIANCE INDUSTRIES LIMITED, a company registered under the Companies Act, 1956

and having its registered office at 3rd Floor, Maker Chambers IV, 222, Nariman Point,

Mumbai 400021 (hereinafter referred to as “Company”, which expression shall, unless

repugnant to the context thereof, be deemed to include its successors and permitted

assigns); and

______________, a company incorporated under the laws of _______________ and having

its registered office at________________________ (hereinafter referred to as “Buyer”, which

expression shall, unless repugnant to the context thereof, be deemed to include its

successors and permitted assigns).

Company and Buyer shall collectively be referred to as “Parties” and individually a “Party”.

WHEREAS:

A. Company wishes to sell on “AS IS WHERE IS BASIS” the entire lot of material as specified in Annexure – I of this Contract (“Surplus Materials”) stored at its warehouses located at Gadimoga/ Vakalpudi, near Kakinada, AP, India (hereinafter referred to as “Company Warehouse”) on Incoterms - ‘Ex Warehouse Basis’ in ‘Unpacked condition’. However loading of Surplus Materials shall be done by Company free of charge. Accordingly, Company had issued Tender No: RIL/E&P/MAT-SALE/2015/02 for Sale of Surplus Materials.

B. Buyer has inspected the Surplus Materials and its quality at Company Warehouse and has represented to Company that Buyer has entirely satisfied itself as regards to the fitness and quality of Surplus Materials for its own purpose and with the various aspects of this Contract and has considered the nature and extent of all probable and possible situations, hindrances or interference and has examined and considered all other matters, conditions and things, probable and possible contingencies, and generally all matters incidental or ancillary thereto and affecting this Contract.

C. Buyer has expressed its desire to purchase the said Surplus Materials to Company

vide its proposal dated ____________.

D. Based on the above representations made by the Buyer during the competitive bidding process, Company hereby agrees to sell the Surplus Materials upon the terms and conditions appearing hereinafter.

NOW THEREFORE IT IS HEREBY AGREED AS FOLLOWS 1. SCOPE:

Buyer shall lift the Surplus Materials as listed in Annexure-I on Ex Warehouse Basis in ‘Unpacked condition’ from Company Warehouse within ninety (90) days from the date of receipt of payment by Company; however loading of Surplus Materials shall be done by Company free of charge. Company may arrange for packing, if requested by Buyer, as per their instructions and Buyer agrees to pay the cost of such packing before lifting of Surplus Materials.

2. PRICE BASIS AND TAXATION

Total Ex Works in Unpacked condition at Company Warehouse Basis Value is USD/INR ________. This contract price shall remain firm during the duration of this Contract.


Buyer understands that Surplus Materials is either imported in to India after availing customs

duty exemptions or procured in India availing excise duty exemptions, as available under

respective production sharing contract signed with Govt. of India. This sale of Surplus

Materials to Indian Buyers shall attract either Customs or Excise duties including applicable

interest till the date of payment of such duties by Buyer, sales tax, local duties, levies etc. and

quoted price shall be net of all such taxes, duties, levies and interest applicable in India on

sale of Surplus Materials.

No taxes, duties or levies are applicable on sale and export of Surplus Materials outside India.

However, Buyer shall be responsible for any taxes, duties or levies in their country of import.

Any error in the quantity of Surplus Materials at Annexure-I will not invalidate the Contract. A proportionate refund will be made to the Buyer if the quantity actually available at the time of collection of Surplus Materials is less than that have been specified in the Contract.

3. INVOICING AND PAYMENT: Proforma invoice for 100% of the contract price shall be raised by Company immediately on

execution of this Contract. Buyer shall pay 100% value of proforma invoice in advance to Reliance Industries Limited by way of direct remittance within fifteen (15) days from receipt of Performa invoice, as per details provided in the Performa Invoice.

Advance payment receipt and delivery order shall be issued to Buyer after receipt of payment

in Company bank account, Buyer shall process for re-export of Surplus Materials including Indian Custom Clearance and any associated costs in this regard shall be borne by Buyer. If Buyer does not lift the Surplus Materials due to any reason, the amount paid shall not be refunded. In case of any delay in lifting the Surplus Materials, no interest will be paid to the Buyer. Storage charges etc. at actual, shall be paid by Buyer.

4. STATUTORY REQUIREMENTS: Buyer shall comply with all statutory requirements relating to its personnel, vehicles and lifting

of Surplus Materials etc. at its own cost. Company shall not be responsible for any non- compliance by Buyer and Buyer shall be responsible for carrying out all the export, customs and port related formalities and submission of original shipping document within fifteen (15) days from the date of lifting of Surplus Materials from Company Warehouse.

5. INDEMNITY AND LIABILITY Company’s liability in relation to Surplus Materials shall cease on handing over of the same to

Buyer or its agent at Ex Work Company Warehouse. Buyer shall protect, defend, indemnify and hold Company harmless from and against any and all claims, liabilities, costs (including attorney fees), damages and expenses of whatsoever kind and nature after the Ex Work Company Warehouse. Buyer acknowledges that Company shall not remain liable for Surplus Materials, if Buyer fails to take delivery of Surplus Materials within ninety (90) days from the date of receipt of payment by Company.

6. GOVERNING LAWS & ARBITRATION

The Contract shall be governed and construed in accordance with the laws of India. All disputes arising out of the Contract which cannot be settled amicably, will be resolved by arbitration. The Parties shall jointly appoint a sole arbitrator in accordance with the provisions of the Indian Arbitration and Conciliation Act 1996. The venue for arbitration shall be Mumbai, India.

7 INSURANCE

Buyer shall be solely responsible for insurance of Surplus Materials after taking delivery of Surplus Materials. Buyer shall also be responsible for insurance of Surplus Materials if it fails to take delivery within ninety (90) days from date of receipt of the payment by Company.


Buyer shall also be solely responsible for insurance of its personnel, deputed to Company for lifting of Surplus Materials against any personal injury or death while lifting of the Surplus Materials and shall also maintain any other insurance as required by law for performing of the Contract.

Buyer shall protect, defend, indemnify and hold Company harmless from and against any and all claims, liabilities, costs, damages and expenses of whatsoever kind and nature arising from any injury or illness or death of Buyer’s personnel regardless of cause.

8 TERMINATION FOR DEFAULT Company shall, without prejudice to any of its rights and remedies available to it under this

Contract or under any law time being in force, shall have the right to terminate the Contract forthwith by written notice on the occurrence of any of the events mentioned below:

(a) Buyer’s personnel are found guilty of any malpractice or dishonesty or if they engage in

bribery or corruption during the performance of the Contract; (b) Buyer fails to take delivery of Surplus Materials for more than One Hundred and

Twenty (120) days from the date of receipt of payment by Company; (c) Buyer breaches any of the terms and conditions of this Contract. In the event Company terminates the Contract on the occurrence of one or more of the above events, then Company shall not be liable to refund the payment received from the Buyer.

9. DISCLAIMER OF WARRANTIES

Company hereby disclaims all warranties, conditions, and guaranties and representations relating to the Surplus Materials, express or implied, statutory or otherwise, including without limitation any implied warranties of merchantability, fitness for a particular purpose.

10. MISCELLANEOUS 10.1 Entirety of contract This Contract, together with its annexures constitutes the entire contract between the Parties

with respect to the sale of Surplus Materials. This Contract supersedes all previous agreements and proposals, oral or written, all previous negotiations, and all other communications between the Parties with respect to the subject matter hereof.

10.2 Amendment No modifications, alterations, amendment or waivers of any provisions herein contained shall

be binding on the Parties hereto unless evidenced in writing signed by duly authorized representatives of both Parties.

10.3 Assignment This Contract shall not be assigned by Buyer without the prior written consent of Company in

writing. Company shall always have the right to assign this Contract to any of its group companies and its co-venturers without seeking prior consent of Buyer. In the event this Contract is assigned under the terms of this Clause, the assignees of the respective Parties shall be bound by the terms and conditions of this Contract and shall, if deemed necessary by the Parties at the time of such assignment, undertake in writing to be so bound by this Contract.

10.4 Notice All notices required herein shall be in writing in English and delivered in person, by courier

service or by an electronic means of transmitting written communication (but not e-mail) which provides confirmation of complete transmission, with the date and time, and shall be deemed to have been properly given or made if sent to the respective Party at the address as indicated


below: Company: Reliance Industries Limited – Operator Petroleum Business (E&P) Reliance Corporate Park, Building No. 11, “A” Wing Second Floor, Thane Belapur Road, Ghansoli, Navi Mumbai- 400701, India. Tel: +91 22 4478 5728 Fax: +91 22 4477 0851 Attn: Mr. Suresh PM. – Vice President (Supply Chain Management) Buyer: Attention: _________________ Telephone: __________________ Facsimile: __________________ Either Party may change the person or address to which notice shall be sent by giving the other Party written notice of such change. Notice when given in terms of Clause 10.4 shall be effective when delivered at the address as set out in this Clause of the other Party during business hours on working days and, if received after business hours, on the following working day. IN WITNESS WHEREOF the representatives of the parties to this Contract being duly authorised have hereunto set their hands and have executed this Contract on the day and year herein above written.

For and on behalf of Reliance Industries Limited

For and on behalf of Buyer

By : _________________ By : _________________

Name :

Name :

Title :

Title :

Date :

Date :

Witness ____________

Witness ____________


ANNEXURE 3 PROFORMA FOR EMD (BANK GUARANTEE) [TO BE PRINTED ON A NON-JUDICIAL STAMP PAPER OF APPROPRIATE VALUE AS

PER INDIAN STAMP ACT, 1899] Ref. NoIIII DateIIIIII... To, Reliance Industries Ltd., Petroleum Business (E&P), Reliance Corporate Park (RCP), Building No 11, ‘A’ Wing, Second Floor, Thane Belapur Road, Ghansoli, Navi Mumbai – 400701, India. Attn: Mr. Venkatram Ravindran Dear Sir(s), 1. Whereas Reliance Industries Limited (hereinafter called "RIL”, which expression shall,

unless repugnant to the context or meaning thereof, include all its successors, administrators, executors and assignees) has floated a Tender No. RIL/E&P/MAT-SALE/2015/02 and M/s _________ (Bidder’s name) having its registered/ head office at __________ (hereinafter called the “Bidder”, which expression shall, unless repugnant to the context or meaning thereof, include all its successors, administrators, executors and assignees) have submitted a bid dated _________ and the Bidder has agreed to furnish as a condition precedent for participation in the said Tender an unconditional and irrevocable bank guarantee of USD/ INR ______________ (amount in figures & words) for the due performance of the Bidder's obligations as contained in the terms of the said Tender and other terms and conditions contained in the Tender issued by RIL, which amount is liable to be forfeited on the happening of any of the contingencies mentioned in said documents.

2. We, _____________ name of the bank), registered under the laws of ___________,

having head / registered office at __________ (hereinafter referred to as the “Bank", “we” or “us” which expression shall, unless repugnant to the context or meaning thereof, include all its successors, administrators, executors and permitted assignees) do hereby irrevocably and unconditionally guarantee and undertake to pay immediately on first demand in writing by RIL, the amount of USD/ INR __________ (amount in figures & words) in aggregate at any time without any demur, reservations, recourse, contest or protest and/or without reference to the Bidder and any such demand made by RIL on the Bank shall be conclusive and binding notwithstanding any difference between RIL and the Bidder or any dispute pending before any court, arbitrator or any other matter whatsoever. We also agree that this guarantee shall not be determined/ discharged/ affected by the liquidation, winding up, dissolution, or insolvency of the Bidder and will remain valid, binding and operative against the Bank.

3. The Bank also undertakes that RIL, at its option, shall be entitled to enforce this

guarantee against the Bank as a principal debtor, in the first instance, without proceeding against the Bidder.

4. The Bank further agrees that between the Bank and RIL, for the purpose of this

guarantee, any notice of the breach of the Bidder’s obligations as contained in the Tender documents as referred above, given to the Bank by RIL shall be conclusive and binding on the Bank without any proof, notwithstanding any other matter or difference or dispute whatsoever. We further agree that this guarantee shall not be affected by any change in the Bank’s constitution, in the constitution of RIL or the constitution of the Bidder. We also undertake not to revoke in any case this guarantee during its currency and any extension thereof.


5. We further agree that any change, modification, addition or amendment which may be made in accordance with the terms and conditions of the Tender shall not in any way release us from our continuing liability hereunder, and we hereby expressly waive our right to consent to or to receive notice of any such change, modification, addition or amendment.

6. The guarantee shall not be discharged by any change in applicable laws.

7. The Bank confirms that this guarantee has been issued with observance of appropriate

laws of the country of issue.

8. The Bank confirms that this guarantee shall be irrevocable and governed and construed in accordance with Indian laws. The courts of Mumbai, India only are to have exclusive jurisdiction in relation to the enforcement of this guarantee or to settle any dispute arising out of or in connection with, this guarantee and the Bank hereby submits to the jurisdiction of the courts of Mumbai, India only. The submission is irrevocable and is for the exclusive benefit of RIL. Nothing contained herein shall, however, limit the right of RIL to take proceedings to enforce this guarantee against the Bank in any other court or in the courts of more than one jurisdiction at the same time. The Bank irrevocably waives any objection, on the grounds of forum non convenience or any other ground, to the taking of enforcement proceedings or settling disputes in any court referred to in this paragraph.

9. This guarantee shall remain in force up to ________ (as per terms of Tender) and any

demand in respect thereof must reach the Bank not later than the aforesaid date.

10. Notwithstanding anything contained herein above, our liability under this guarantee is limited to USD/ INR _______ (amount in figures & words) and our guarantee shall remain in force until ____________ (date of expiry of bank guarantee – to be in line with clause 9 above).

11. The Bank undertakes not to revoke this guarantee during its currency.

12. All charges, fees, commission and other costs in connection with the issue of this

guarantee shall be paid by the Bidder. Failure of the Bidder to make such payments shall not affect the bank’s obligation under this guarantee and RIL shall be paid the money due to it under this guarantee without any deduction.

13. Any letter of demand by RIL to the Bank/branch of the Bank [insert name & address of

the branch in case of a foreign bank] shall be deemed to be sufficient demand for payment under this guarantee.

Any claim under this guarantee must be received by us before the expiry of this guarantee. If no such claim has been received by us by the said date, the right of RIL under this guarantee will cease. However, if such a claim has been received by us by the said date, all the rights of RIL under this guarantee shall be valid and shall not cease until we have satisfied that claim. In witness whereof, the Bank through its authorized officer has set its hand and stamp on thisIII.day of IIIII2015 at ________________ (Signature) Full name & official address (in legible letters) Full name, designation and address (in legible letters) with bank stamp. Attorney as per Power of Attorney NoIIIIII..DatedIIII WITNESS NO. 1 WITNESS NO. 2

Documents

RELIANCE INDUSTRIES LIMITED Petroleum Business … · detailed list of the surplus materials along with terms & conditions for ... Email Address: - [email protected] ... invites