1. CustomCutLengths: A mat with a standard width but cut to your designated length.

2. CustomLengthsandWidths:A mat manufactured to both your length and width requirement.

3. FullCustom:Our manufacturing process allows for a variety of cutouts, configurations and shapes including circular and oval mats.

REFE

REN

CE A Note From the President

Matcolours Matcoloursw/bordersColour Abbreviation Colour AbbreviationBlack BK Black/Yellow BYLBlue BL Black / Orange BORBrown BN Black / Chevron CHVCharcoal CH Black / White BWHGray GYOrange ORRed RDSandalwood SASky Blue SBTan TNTerra Cotta TC

ProductGroup

DimensionsThickness* WidthXLength Colour ProductNo.

415 . 916 x 3 x 10 BK = 415.916x3x10BK

The example below is for our Diamond-Plate SpongeCote® in a 3’ x 10’ (91 x 305cm) size, 9/16” (14mm) thick and black in colour.

Dryareaonly

DryandWetarea:water

DryandWetarea:paint

ESDproperties

Non-conductive Customlengths FullCustom

Customlengthsandwidths

Containsrecycledcontent(greenrating)

DryandWetarea:oil

Wearwell is the industry leader in custom matting. There are 3 levels of customization:

» Product Quick Reference

» Specification Data

» Line Drawings

» Performance Scale

» Green Rating

» Value Continuum

Wearwell’s standard product numbers are built using a 3 digit product family code, dimensions and mat and/or trim colour. You will find product family codes clearly identified throughout the catalog as well as the available sizes and thicknesses. Colour abbreviations are as follows:

Many products have a performance rating chart that looks similar to Figure 1. If there is a performance chart with a solid blue line beneath the gradient line, that means that there is an UltraSoft or a GritWorks!® version of the product available that offers an increased level of performance. Such a chart would look similar to the Figure 2. In Figure 2, the chart states that there is a GritWorks! version of the product that offers the same level of anti-fatigue and wear resistance, but offers a higher level of slip resistance.

Figure1

min. 1 2 3 4 5max.

Anti-Fatigue

WearResistance

SlipResistance

Figure2

min. 1 2 3 4 5max.

Anti-Fatigue

WearResistance

SlipResistance

PuttingTogetherPartNumbers

PerformanceRatings

With so many products to choose from we appreciate how confusing it can be to choose the RIGHT product. You will find a variety of tools to make these decisions easier.

UnderstandingPartNumbers

ChoosingtheRightProduct

Customization

Icons

*Inches w/o fraction line.

2

The two years since we last introduced a new catalog were certainly challenging. Still, the wheels of progress continue to turn at Wearwell. We are often defined by how we respond to adversity. I think you will find in this catalog that at Wearwell, we responded positively and powerfully. The real core of what we are about can be expressed in four easy to understand principals.

» Passion:We are absolutely consumed by the desire to provide the best ergonomic flooring and matting solutions for our hard working end users. Ergonomics is not a secondary business for Wearwell. Our customers’ safety is our Passion!

» Innovation: It is imbedded in our DNA at Wearwell. We empathize with our customers’ ergonomic and safety challenges. New products result and new ideas about how to simplify product selection and improve the overall customer experience at Wearwell.

» Customization: Over 95% of Wearwell products can be customized. Additionally, the need to customize on-site is critical. Ergonomic Flooring achieves the look, layout and functionality you desire in a flooring product with the added feature of ergonomic value.

» Service: Certainly, this means delivering quality products on-time. It also means friendly and professional support in every interaction. As well, it means qualified and capable sales pros that can survey customers’ facilities and specify the right products for each and every application.

I am pleased that this new catalog embodies our core principals throughout. You will find our products are broken down into two primary categories: Ergonomic Flooring and Ergonomic Matting. Ergonomic matting is further categorized by industry or application.

On this page you will see the new features we have incorporated into this year’s catalog that will help you differentiate our products and our company from the rest.

I’m confident you will agree and you will choose Wearwell as your partner for ergonomic flooring and matting solutions.

Thank You!

Elliot Greenberg President&CEO

Wearwell

List Price $5.67$5.67 $9.07$9.07 $17.86$17.86

Life Expectancy 1 year 3 years 8 years8 years

Value $5.67/year $3.02/year $2.23/year$3.02/year $2.23/year$3.02/year $2.23/year$3.02/year $2.23/year

BEST VALUERejuvenatorRejuvenatorRejuvenatorRejuvenatorNo. 502No. 502No. 502No. 502No. 502No. 502No. 502No. 502

Tuf Sponge No. 451Tuf Sponge No. 451Tuf Sponge No. 451

Diamond-Plate Diamond-Plate SpongeCoteSpongeCote® No. 415 No. 415

A lower upfront price does not necessarily translate to a better value.

The specifics of each The specifics of each application are important application are important in determining the in determining the variables, such as variables, such as expected life and the best expected life and the best products to compare. products to compare. Consult with your Wearwell Consult with your Wearwell Sales Professional to Sales Professional to assist in completing a assist in completing a Wearwell Value Continuum Wearwell Value Continuum for your needs.for your needs.

AA VValuealueVValueVV CContinuumontinuum ccanan bbee ccreatedreated fforor vvirtuallyirtually aanyny ssituation.ituation.

Ergonomics Study

Value ContinuumBecause Wearwell manufactures so many different types of mats and flooring products, we frequently get asked about the difference in value from one product to the next. Generally, value in the ergonomic matting and flooring world boils down to how much money a product costs relative to how long that product will last the customer. We arrive at that figure by dividing the price per square foot of the product by the expected life of the product in years. The result shows a customer the price per year they are paying for different products.

Below is a very simple Value Continuum for a typical dry area application where we are comparing .91x 1.52 m 451 Tuf Sponge vs. 415 Diamond-Plate Spongecote® vs. 502 Rejuvenator®.

Anti-fatigue mats are an integral part of many Ergonomic and Safety Programs. Standing workers love them, but production managers need to be able to justify the financial investment. Although perception studies have proven workers feel much better when they use anti-fatigue mats, Wearwell wanted to go a step further and prove that anti-fatigue matting actually increases worker productivity—resulting in real savings for the company. This study examines the bottom-line impact of using anti-fatigue matting and essentially proves a positive return on investment (ROI).

Wearwell’s 12-month ergonomics study was designed to answer several questions:

Does standing on the job contribute to fatigue?

Does the use of anti-fatigue matting lesson standing workers’ fatigue?

Can using anti-fatigue matting can be linked to increased worker productivity?

Can anti-fatigue matting generate cost savings?

The company used in the study was a manufacturer of commercial ovens. It was the largest and “best” The company used in the study was a manufacturer of commercial ovens. It was the largest and “best” in terms of wages and benefits employer in a 48.28km radius, but with a high injury rate and a high rate in terms of wages and benefits employer in a 48.28km radius, but with a high injury rate and a high rate of absenteeism—as high as 10% on Mondays.

Before the installation of anti-fatigue matting, a questionnaire was given to workers to assess:» Their current work surface (i.e. concrete)

» The overall level of fatigue before and after their shift

» The fatigue and discomfort level of their legs and feet before and after their shift

Once the matting was installed, the workers then completed that same questionnaire on a monthly Once the matting was installed, the workers then completed that same questionnaire on a monthly basis for 12 months. The workers’ perceptions were very clear. The participants felt considerably less basis for 12 months. The workers’ perceptions were very clear. The participants felt considerably less fatigued before and after work when using anti-fatigue mats. In addition, the “at risk” areas of their fatigued before and after work when using anti-fatigue mats. In addition, the “at risk” areas of their bodies, such as legs, feet, and lower back, were much more comfortable when anti-fatigue mats were bodies, such as legs, feet, and lower back, were much more comfortable when anti-fatigue mats were used.

More of the Company’s StatisticsMore of the Company’s StatisticsMore of the Company’s StatisticsMore of the Company’s StatisticsMore of the Company’s StatisticsNo. of Employeesmployees 175 in Mfg./Assembly175 in Mfg./AssemblyNo. of Shifts 2Location Populationopulation Less than 5,000Avg.Avg. Employeemployee TenureTenureT 4 YearsAvg.Avg. Employeemployee Agege 41Mean Employeemployee Agege 35

The installation of anti-fatigue mats resulted in an estimated 2.2% increase in productivity due to lower The installation of anti-fatigue mats resulted in an estimated 2.2% increase in productivity due to lower absenteeism and injury rates and a $60,000 reduction in insurance premiums. The numbers prove it. absenteeism and injury rates and a $60,000 reduction in insurance premiums. The numbers prove it. Through this study Wearwell was able to prove that anti-fatigue matting is good for employees and Through this study Wearwell was able to prove that anti-fatigue matting is good for employees and good for the business. The company studied realized a cost savings of $360,000 over the course of the good for the business. The company studied realized a cost savings of $360,000 over the course of the one year study.

Cost Savings

InstallationFacts BeforeBefore MMatsats AfterAfter MMats Improvementats Improvementats Improvementats Improvementats Improvement wwithith MMatsats

InjuryInjury Rate >3 per month>3 per month <1 per month<1 per month 70%70%Absenteeism 5.2% (up to 10% on Mondays) 4%5.2% (up to 10% on Mondays) 4%5.2% (up to 10% on Mondays) 4%5.2% (up to 10% on Mondays) 4% 23%23%

Cost Savings Related to Anti-fatigue MatsCost Savings Related to Anti-fatigue MatsIncreased Productivityroductivity $300,000Insurance Premium Reduction $60,000

TotalTotal CCostost SSavingsavings $360,000$360,000

REFERENCE

REFERENCE

33

Ergonomic flooring and matting providescomfort that can ultimately lead to higheremployee productivity, health and wellness. The simple actof standing and being in motion extensively throughout theday potentially causes pain and discomfort in key areas ofthe body. Our ergonomic mattings and flooring solutionsare designed to reduce this risk.

REFE

REN

CE

4

Ergonomic Flooring Vs. Ergonomic Matting

WhatIsErgonomicFlooring?The long awaited combination of durability, safety, flexibility, affordability, aesthetics and comfort in a flooring product.

WhyShouldIConsiderErgonomicFlooring?You need to provide safety and ergonomic value to workers that stand and are on the move. Only a flooring product can accomplish that.

HowDoesErgonomicFlooringImproveMySafetyAndErgonomicsProgram?There are several benefits. First, it expands the ergonomic value of a resilient floor surface to a larger area than a standard work station mat. Second, gritted versions are available for wet and oily areas to help prevent slips and falls. Third, different versions are available to accommodate different needs. For example, slightly harder products provide ergonomic value, but also allow for heavy cart to roll over the mats and deliver materials to work stations that might otherwise require lifting and more strenuous activity to deliver. Finally, while we always want to prevent any type of slip and fall, should one occur on an ergonomic floor, the likelihood of significant injury is greatly reduced by the softer surface.

HowWillErgonomicFlooringLookInstalled?The product is available in different “tile” sizes, from 305 x 305 mm to .91 x .91 m. These tiles are specifically designed to interconnect to form a “Positive Lock.” The seams stay tight throughout the life of the product and the tiles will not easily separate unless you intentionally “unzip” them. Depending on style, different colours are also available to enhance the visual appeal of the product. In short, it looks fantastic!

HowDoIInstallErgonomicFlooring?Installation is similar to other flooring products, except there are no adhesives or fasteners required. The tiles have male connectors on two sides and female connectors on the two opposing sides. Simply interconnect the tiles to accommodate any layout. The materials can easily be trimmed to butt up against equipment, walls or other transition points. Ramps are available to provide smooth transitions and prevent tripping.

HowDoIMaintainErgonomicFlooring?Maintenance is the same as with other types of flooring products. Products are available for both dry and wet areas. Because individual tiles can be removed and replaced with ease, should a section of the flooring get damaged or need to be replaced, you can do so easily without a complete tear-out and re-install. This saves you money in terms of replacement materials and installation labor over the life of the product.

WillAnyModularMatWorkAsErgonomicFlooring?NO! The simplest way to think of this is that while all Wearwell ergonomic flooring products are modular, not all modular products are suitable as ergonomic flooring. We refer to the “Three P’s” of installation types for clarity. Only “Positive” locking products are considered. These form tight seams and stay put in application until unzipped for easy replacement or reconfiguration. “Permanent” locking systems require adhesives, heat bonding or mechanical fasteners that eliminate the ability to reconfigure or replace sections easily. “Passive” locking systems have connectors that overlay each other without truly locking together. They separate too easily in larger installations which can cause trip hazards and ultimately require adhesives or mechanical fasteners to create a “Permanent” lock.

WhatIsErgonomicMatting?The practical, economical, tried-and-true solution for ergonomic issues in work stations and assembly line applications.

WhyShouldIConsiderErgonomicMatting?You need to provide safety and ergonomic value to standing workers in numerous applications throughout your facility.

HowDoesErgonomicMattingImproveMySafetyAndErgonomicsProgram?There are several benefits. First, it provides quantifiable improvements in productivity and lost time that save you serious money. Second, there is a huge array of different materials and constructions available to address virtually any application issue you might encounter including comfort, slip prevention, static discharge, weld sparks, contamination control, switchboard and many others. Third, different comfort levels are available to accommodate a wide range of subjective tastes among your workforce. Finally, these products improve morale which makes your work life easier to manage.

HowWillErgonomicMattingLookInstalled?Generally, ergonomic mats are clean and basic geometric shapes that fit nicely into most work station layouts. There are many different options available in terms of appearance. Popular surface design choices include diamond plate, marbleized tile-top, corrugated and pebbled. The most common colours are black and black with yellow borders, but other colours are available, depending on the style of product chosen.

HowDoIInstallErgonomicMatting?Typically, these products are ready to “throw down” in a work station right out of the box, so installation is a breeze. Some products are available in long rolls that can quickly be laid out along assembly lines, staging areas or in aisles. Many products can be factory customized in length, width or even basic shapes which eliminates the need to customize on-site in smaller work areas.

HowDoIMaintainErgonomicMatting?Products are available for both dry and wet areas. Cleaning instructions are available at the back of this catalog for each type of matting product. Most matting products last anywhere from 1-5 years in application. Because mats tend to come in one piece, typically the entire mat is replaced with a new one when necessary.

ErgonomicMattingAllLooksTheSame.AreThereDifferencesInTheProducts?Absolutely!! The unfortunate fact that most mats are black must not lead to a sense of indifference regarding product selection. Wearwell takes great pride in the design and materials we use to create a different experience for the end user from one product type to the next. Take a close look at the layout in this catalog of our Diamond-Plate and Tile-Top products for examples of how products differ dramatically in performance despite a similar appearance.

Ergonomic Flooring is available in a range of sizes and styles. For assistance choosing the best ergonomic flooring product for your facility, inquire about a Site Survey.

305mm

305mm

457mm

.91m

.91m

Rejuvenator®ConnectNo.502(pg.5)

ErgoDeck®

(pg.6)

F.I.T.™(pg.7)

457mm

UltraSoftDiamond-PlateNo.414(pg.8)

Ergonomic Matting

Ergonomic Flooring

» 16 mm thick, exceptionally comfortable.

» Customize to fit any floor size or configuration including runners.

» Interlocking System prevents separation.

» Easily replace single pieces or sections as needed to reduce costs.

» Virtually indestructible.

» Rejuvenator Connect is the ultimate ergonomic floor in construction and comfort for workers that stand and are on the move. Large modular tiles interlock on all four sides to customize on-site virtually any flooring configuration. Interlocking ends and centers with built in borders are also available to quickly form long runners—no separate edging to buy reduces costs and installation time.

Size Thickness Description PartSize Thickness Description PartSize Thickness Description PartSize Thickness Description PartSize Thickness Description PartSize Thickness Description PartSize Thickness Description PartSize Thickness Description PartSize Thickness Description Part NNumberumber UOMUOM.61 x .91 m 16 mm Single Mat 502.58x2x3BK.61 x .91 m 16 mm Single Mat 502.58x2x3BK.61 x .91 m 16 mm Single Mat 502.58x2x3BK.61 x .91 m 16 mm Single Mat 502.58x2x3BK EA.61 x 1.52 m 16 mm Single Mat 502.58x2x5BK.61 x 1.52 m 16 mm Single Mat 502.58x2x5BK.61 x 1.52 m 16 mm Single Mat 502.58x2x5BK.61 x 1.52 m 16 mm Single Mat 502.58x2x5BK.61 x 1.52 m 16 mm Single Mat 502.58x2x5BK.61 x 1.52 m 16 mm Single Mat 502.58x2x5BK.61 x 1.52 m 16 mm Single Mat 502.58x2x5BK.61 x 1.52 m 16 mm Single Mat 502.58x2x5BK.61 x 1.52 m 16 mm Single Mat 502.58x2x5BK.61 x 1.52 m 16 mm Single Mat 502.58x2x5BK.61 x 1.52 m 16 mm Single Mat 502.58x2x5BK.61 x 1.52 m 16 mm Single Mat 502.58x2x5BK EA.91 x 1.52 m 16 mm Single Mat 502.58x3x5BK.91 x 1.52 m 16 mm Single Mat 502.58x3x5BK.91 x 1.52 m 16 mm Single Mat 502.58x3x5BK.91 x 1.52 m 16 mm Single Mat 502.58x3x5BK.91 x 1.52 m 16 mm Single Mat 502.58x3x5BK.91 x 1.52 m 16 mm Single Mat 502.58x3x5BK.91 x 1.52 m 16 mm Single Mat 502.58x3x5BK.91 x 1.52 m 16 mm Single Mat 502.58x3x5BK EA

Size Thickness DescriptionSize Thickness DescriptionSize Thickness DescriptionSize Thickness DescriptionSize Thickness DescriptionSize Thickness DescriptionSize Thickness Description PartPart NNumber UOMumber UOMumber UOM.61 x 1.52 m 16 mm Center Mat.61 x 1.52 m 16 mm Center Mat.61 x 1.52 m 16 mm Center Mat 502.58x2x5CBK EA502.58x2x5CBK EA.61 x 1.52 m 16 mm End Mat w/ Female Connectors 502.58x2x5EFBK EA.61 x 1.52 m 16 mm End Mat w/ Female Connectors 502.58x2x5EFBK EA.61 x 1.52 m 16 mm End Mat w/ Female Connectors 502.58x2x5EFBK EA.61 x 1.52 m 16 mm End Mat w/ Female Connectors 502.58x2x5EFBK EA.61 x 1.52 m 16 mm End Mat w/ Female Connectors 502.58x2x5EFBK EA.61 x 1.52 m 16 mm End Mat w/ Male Connectors 502.58x2x5EMBK EA.61 x 1.52 m 16 mm End Mat w/ Male Connectors 502.58x2x5EMBK EA.61 x 1.52 m 16 mm End Mat w/ Male Connectors 502.58x2x5EMBK EA.61 x 1.52 m 16 mm End Mat w/ Male Connectors 502.58x2x5EMBK EA.61 x 1.52 m 16 mm End Mat w/ Male Connectors 502.58x2x5EMBK EA.91 x 1.52 m 16 mm Center Mat.91 x 1.52 m 16 mm Center Mat.91 x 1.52 m 16 mm Center Mat 502.58x3x5CBK EA502.58x3x5CBK EA.91 x 1.52 m 16 mm End Mat w/ Female Connectors 502.58x3x5EFBK EA.91 x 1.52 m 16 mm End Mat w/ Female Connectors 502.58x3x5EFBK EA.91 x 1.52 m 16 mm End Mat w/ Female Connectors 502.58x3x5EFBK EA.91 x 1.52 m 16 mm End Mat w/ Female Connectors 502.58x3x5EFBK EA.91 x 1.52 m 16 mm End Mat w/ Female Connectors 502.58x3x5EFBK EA.91 x 1.52 m 16 mm End Mat w/ Male Connectors 502.58x3x5EMBK EA.91 x 1.52 m 16 mm End Mat w/ Male Connectors 502.58x3x5EMBK EA.91 x 1.52 m 16 mm End Mat w/ Male Connectors 502.58x3x5EMBK EA.91 x 1.52 m 16 mm End Mat w/ Male Connectors 502.58x3x5EMBK EA.91 x 1.52 m 16 mm End Mat w/ Male Connectors 502.58x3x5EMBK EA

Rejuvenator® Connect No. 502

5

SizeSize Thickness DescriptionThickness DescriptionThickness DescriptionThickness DescriptionThickness Description PartPart NNumber UOMumber UOMumber UOM.91 x .91 m 16 mm Mat, Black.91 x .91 m 16 mm Mat, Black.91 x .91 m 16 mm Mat, Black 502.58x3x3BK EA502.58x3x3BK EA50 x 990 mm 16 mm Female Ramp, Yellow50 x 990 mm 16 mm Female Ramp, Yellow50 x 990 mm 16 mm Female Ramp, Yellow50 x 990 mm 16 mm Female Ramp, Yellow50 x 990 mm 16 mm Female Ramp, Yellow50 x 990 mm 16 mm Female Ramp, Yellow 502.58x2x39FYL EA502.58x2x39FYL EA50 x 990 mm 16 mm Male Ramp, Yellow50 x 990 mm 16 mm Male Ramp, Yellow50 x 990 mm 16 mm Male Ramp, Yellow50 x 990 mm 16 mm Male Ramp, Yellow50 x 990 mm 16 mm Male Ramp, Yellow50 x 990 mm 16 mm Male Ramp, Yellow 502.58x2x39MYL EA502.58x2x39MYL EA50 x 990 mm 16 mm Female Ramp, Black50 x 990 mm 16 mm Female Ramp, Black50 x 990 mm 16 mm Female Ramp, Black50 x 990 mm 16 mm Female Ramp, Black50 x 990 mm 16 mm Female Ramp, Black50 x 990 mm 16 mm Female Ramp, Black 502.58x2x39FBK EA502.58x2x39FBK EA50 x 990 mm 16 mm Male Ramp, Black50 x 990 mm 16 mm Male Ramp, Black50 x 990 mm 16 mm Male Ramp, Black50 x 990 mm 16 mm Male Ramp, Black50 x 990 mm 16 mm Male Ramp, Black50 x 990 mm 16 mm Male Ramp, Black 502.58x2x39MBK EA502.58x2x39MBK EA

A simple 2 mat configuration.

+

EndMatw/MaleConnectorsCenterMatEndMatw/Female

Connectors

min. 1 2 3 4 5max.

Anti-Fatigue

WearResistance

SlipResistance

SpecificationsSpecificationsSpecifications && TTestingestingestingTTestingTTCompoundCompound Urethane

Edges Optional 50 x 990 mm ramps in black or yellowor yellow

FlammabilityFlammability MVSS 302: “A” Rating per MVSS 302MVSS 302: “A” Rating per MVSS 302Coefficient of Friction ASTM F1677: Dry: .75 Wet: .28ASTM F1677: Dry: .75 Wet: .28

Tabor Abrasion Fed. Std. 191: < 1% lost @ 1,000 cyclescycles

Temperature RangeTemperature Range ASTM D 1056: -45.56 to 121.11oCCompression Set Under Constant Deflection, 25% (Suffix B), 72%(Suffix B), 72%

ASTM D 395: 30 minutes – 5.67, 24 hours – 1.42

WarrantyWarranty 10 years 10 years

Closed-cellurethanesspongeponge

Slip-resistantSlip-resistant uundersidenderside

1616 mm

SpecialSpecial aabrasionbrasion resistantesistant uurethanerethane sskin

» Resilience » Comfort » Long Term Value

Urethaneis#1In:

Rejuvenator Connect comes in a variety of sizes and configurations for a clean, consistent look in ALL areas of your facility!

ERGONOM

IC FLOORING

Industrial & Com

mercial

Ergonomic Matting For Single Workstations

Ergonomic Matting For Aisles that Require Long Lengths

Ergonomic Flooring For Unique Areas or Entire Floors

BlackBlack ((BK)BK)

Black (BK)

Mat: Black (BK)Edging: Black (BK)BK)oorr YYellowellowYellowYYellowY ((YL)YL)(YL)((YL)(

Male

Ram

p

Female

Ramp

» ErgoDeck tiles create a comfortable, ergonomic covering.

» The 457 x 457 mm tiles quickly and securely interlock yet can be unlocked and repositioned when workstations change.

» Their substantial design provides comfort for all standing workers whether they work in one spot or frequently move from one work center to another.

» Will withstand heavy use.

» Optional 152 mm safety ramps and corners.

» 22 mm thick.

» Colours: Original—Black, SOFT—Charcoal, Ramps—Yellow or Black.

» Tiles and Ramps come 10 per package and Ramps with Corners come 4 per package.

DrainageUse where debris mustpass through the mat.

SolidUse in dry areas for easeof maintenance.

Outside Corner

Ramp

Ramp

ErgoDeck®ErgoDeck®ErgoDeck An Ergonomic Floor Above a Floor.

3 countersunk holes forpermanent installations.

2 mm thickfrictionriction bbars.ars.

457 x 457 mm tile has sixLockSafe® connectors perside for a secure interlock.

2222 mm

Optional Edging

>80%>80%

Magnified gritsurface

ErgoDeck®ErgoDeck®ErgoDeck Original Custom ColoursMinimum Order Quantity of 50 Cases per Part Number. Ramps and Corners also available in colours. Call for minimums. Lead time is 4-6 weeks.

Blue(BL)(BL)

Green(GN)(GN)

Red(RD)(RD)

Orange(OR)(OR)

Yellow(YL)(YL)

ErgoDeckErgoDeckErgoDeck PProductroduct NName Extraame Extraame Extra CComfortomfort DryDryDry AAreasreas AroundAround WWateraterWWaterWW w/w/ GGritrit HandHand CCartsartsOriginal Open No. 560Original Open No. 560 n n n

Original Open w/ Grit No. 561Original Open w/ Grit No. 561 n n n

Original Solid No. 562Original Solid No. 562 n n

Original Solid w/ Grit No. 563Original Solid w/ Grit No. 563 n n n

SOFT Open No. 564 Open No. 564SOFT Open No. 564SOFTSOFT n n n

SOFT Solid No. 566SOFT Solid No. 566SOFTSOFT n n

TilesTiles (((mm) Thickness Description/Colour Partmm) Thickness Description/Colour Partmm) Thickness Description/Colour Partmm) Thickness Description/Colour Partmm) Thickness Description/Colour Partmm) Thickness Description/Colour Partmm) Thickness Description/Colour Partmm) Thickness Description/Colour Partmm) Thickness Description/Colour Partmm) Thickness Description/Colour Partmm) Thickness Description/Colour Part NNumberumber UOMUOM457 x 457 22 mm Original Open, Black457 x 457 22 mm Original Open, Black457 x 457 22 mm Original Open, Black 560.78x18x18BK-CS10 Case-10

457 x 457 22 mm Original Open w/ Grit, Black 561.78x18x18BK-CS10 457 x 457 22 mm Original Open w/ Grit, Black 561.78x18x18BK-CS10 457 x 457 22 mm Original Open w/ Grit, Black 561.78x18x18BK-CS10 457 x 457 22 mm Original Open w/ Grit, Black 561.78x18x18BK-CS10 Case-10

457 x 457 22 mm Original Solid, Black457 x 457 22 mm Original Solid, Black457 x 457 22 mm Original Solid, Black 562.78x18x18BK-CS10 Case-10457 x 457 22 mm Original Solid w/ Grit, Black 563.78x18x18BK-CS10457 x 457 22 mm Original Solid w/ Grit, Black 563.78x18x18BK-CS10457 x 457 22 mm Original Solid w/ Grit, Black 563.78x18x18BK-CS10457 x 457 22 mm Original Solid w/ Grit, Black 563.78x18x18BK-CS10457 x 457 22 mm Original Solid w/ Grit, Black 563.78x18x18BK-CS10457 x 457 22 mm Original Solid w/ Grit, Black 563.78x18x18BK-CS10457 x 457 22 mm Original Solid w/ Grit, Black 563.78x18x18BK-CS10457 x 457 22 mm Original Solid w/ Grit, Black 563.78x18x18BK-CS10457 x 457 22 mm Original Solid w/ Grit, Black 563.78x18x18BK-CS10 Case-10457 x 457 22 mm457 x 457 22 mm SOFT Open, CharcoalSOFT Open, CharcoalSOFTSOFT 564.78x18x18CH-CS10 Case-10

457 x 457 22 mm457 x 457 22 mm SOFT Solid, CharcoalSOFT Solid, CharcoalSOFTSOFT 566.78x18x18CH-CS10 Case-10

EdgingEdgingEdging (((mm) Thickness Description Colour Partmm) Thickness Description Colour Partmm) Thickness Description Colour Partmm) Thickness Description Colour Partmm) Thickness Description Colour Partmm) Thickness Description Colour Partmm) Thickness Description Colour Partmm) Thickness Description Colour Partmm) Thickness Description Colour Partmm) Thickness Description Colour Partmm) Thickness Description Colour Partmm) Thickness Description Colour Partmm) Thickness Description Colour Part NNumberumber UOMUOM152 x 457 22 mm Ramp152 x 457 22 mm Ramp152 x 457 22 mm Ramp Yellow 560.78x6x18YL-CS10 Case-10Yellow 560.78x6x18YL-CS10 Case-10Yellow 560.78x6x18YL-CS10 Case-10

152 x 381 x 381 22 mm Outside Corner152 x 381 x 381 22 mm Outside Corner152 x 381 x 381 22 mm Outside Corner Yellow 560.78x6x15x15YL-CS4 Case-4Yellow 560.78x6x15x15YL-CS4 Case-4Yellow 560.78x6x15x15YL-CS4 Case-4

152 x 457 22 mm Ramp152 x 457 22 mm Ramp152 x 457 22 mm Ramp Black 560.78x6x18YL-CS10 Case-10Black 560.78x6x18YL-CS10 Case-10Black 560.78x6x18YL-CS10 Case-10

152 x 381 x 381 22 mm Outside Corner152 x 381 x 381 22 mm Outside Corner152 x 381 x 381 22 mm Outside Corner Black 560.78x6x15x15YL-CS4 Case-4Black 560.78x6x15x15YL-CS4 Case-4Black 560.78x6x15x15YL-CS4 Case-4

152 x 229 x 229 22 mm Inside Corner152 x 229 x 229 22 mm Inside Corner152 x 229 x 229 22 mm Inside Corner Black 560.78x6x9x9BKBlack 560.78x6x9x9BK EA

152 x 229 x 229 22 mm Inside Corner152 x 229 x 229 22 mm Inside Corner152 x 229 x 229 22 mm Inside Corner Yellow 560.78x6x9x9YLYellow 560.78x6x9x9YL EA

152 x 381 x 381 22 mm Outside Corner w/ Grit Black 561.78x6x15x15BK EA152 x 381 x 381 22 mm Outside Corner w/ Grit Black 561.78x6x15x15BK EA152 x 381 x 381 22 mm Outside Corner w/ Grit Black 561.78x6x15x15BK EA152 x 381 x 381 22 mm Outside Corner w/ Grit Black 561.78x6x15x15BK EA152 x 381 x 381 22 mm Outside Corner w/ Grit Black 561.78x6x15x15BK EA152 x 381 x 381 22 mm Outside Corner w/ Grit Black 561.78x6x15x15BK EA

152 x 381 x 381 22 mm Outside Corner w/ Grit Black 561.78x6x15x15BK-CS4 Case-4152 x 381 x 381 22 mm Outside Corner w/ Grit Black 561.78x6x15x15BK-CS4 Case-4152 x 381 x 381 22 mm Outside Corner w/ Grit Black 561.78x6x15x15BK-CS4 Case-4152 x 381 x 381 22 mm Outside Corner w/ Grit Black 561.78x6x15x15BK-CS4 Case-4152 x 381 x 381 22 mm Outside Corner w/ Grit Black 561.78x6x15x15BK-CS4 Case-4152 x 381 x 381 22 mm Outside Corner w/ Grit Black 561.78x6x15x15BK-CS4 Case-4

152 x 457 22 mm Ramp w/ Grit152 x 457 22 mm Ramp w/ Grit152 x 457 22 mm Ramp w/ Grit Black 561.78x6x18BKBlack 561.78x6x18BK EA

152 x 457 22 mm Ramp w/ Grit152 x 457 22 mm Ramp w/ Grit152 x 457 22 mm Ramp w/ Grit Black 561.78x6x18BK-CS10 Case-10Black 561.78x6x18BK-CS10 Case-10Black 561.78x6x18BK-CS10 Case-10

152 x 229 x 229 22 mm Inside Corner w/ Grit Black 561.78x6x9x9BK152 x 229 x 229 22 mm Inside Corner w/ Grit Black 561.78x6x9x9BK152 x 229 x 229 22 mm Inside Corner w/ Grit Black 561.78x6x9x9BK152 x 229 x 229 22 mm Inside Corner w/ Grit Black 561.78x6x9x9BK152 x 229 x 229 22 mm Inside Corner w/ Grit Black 561.78x6x9x9BK EA

152 x 457 22 mm Ramp152 x 457 22 mm Ramp152 x 457 22 mm Ramp Charcoal 564.78x6x18CH-CS10 Case-10Charcoal 564.78x6x18CH-CS10 Case-10Charcoal 564.78x6x18CH-CS10 Case-10

152 x 229 x 229 22 mm Inside Corner152 x 229 x 229 22 mm Inside Corner152 x 229 x 229 22 mm Inside Corner Charcoal 564.78x6x9x9CHCharcoal 564.78x6x9x9CH EA

152 x 381 x 381 22 mm Outside Corner152 x 381 x 381 22 mm Outside Corner152 x 381 x 381 22 mm Outside Corner Charcoal 564.78x6x15x15CH-CS4 Case-4Charcoal 564.78x6x15x15CH-CS4 Case-4Charcoal 564.78x6x15x15CH-CS4 Case-4

SpecificationsSpecificationsSpecifications && TTestingestingestingTTestingTTCompoundCompound 100% PVC compound100% PVC compoundEdgesEdges Ramps and Corners are availableRamps and Corners are availableFlammabilityFlammability MVSS 302: “A” RatingMVSS 302: “A” RatingTabor Abrasion ASTM D3884: < 1% lossTemperature RangeTemperature Range ASTM D1056: 0 to 48.89oC

Coefficient of Friction ASTM F1677: No. 560/562/564/566: Dry - .65, Wet - .42, No. 561/563: Dry - 1.1, Wet - .62No. 561/563: Dry - 1.1, Wet - .62

WarrantyWarrantyWarranty 3 years3 years

Anti-Fatigue

WearResistance

SlipResistance

OriginalOriginal and Originalriginal w/w/w GritWorks!

min. 1 2 3 4 5max.

SOFT

min. 1 2 3 4 5max.

Anti-Fatigue

WearResistance

SlipResistance

ERGO

NOM

IC F

LOOR

ING

6

Indu

stri

al &

Com

mer

cial

» Comfortable, durable and versatile 305 mm modular floor system.

» LockSafe interlocking System ensures a permanent, secure floor, yet easily dismantled for maintenance or reconfiguration.

» Even large pieces can be rolled up for maintenance, repositioning and storage.

» Covers worn or damaged floors, potentially saving on repair bill.

» Optional ramped safety edges (in Black or Yellow) are available with or without built-in corners.

» Thickness: 16 mm.

» Tiles and Ramps come 20 per package and Ramps with Corners come 4 per package.

Size Thickness ProductSize Thickness ProductSize Thickness ProductSize Thickness Product CCode Description/Colour UOMode Description/Colour UOMode Description/Colour UOMode Description/Colour UOMode Description/Colour UOMode Description/Colour UOMode Description/Colour UOMode Description/Colour UOMode Description/Colour UOMode Description/Colour UOM305 x 305mm 16 mm 540.58x12x12BK-CS20 Drainage, Black Case-20305 x 305mm 16 mm 540.58x12x12BK-CS20 Drainage, Black Case-20305 x 305mm 16 mm 540.58x12x12BK-CS20 Drainage, Black Case-20305 x 305mm 16 mm 540.58x12x12BK-CS20 Drainage, Black Case-20305 x 305mm 16 mm 540.58x12x12BK-CS20 Drainage, Black Case-20305 x 305mm 16 mm 540.58x12x12BK-CS20 Drainage, Black Case-20305 x 305mm 16 mm 540.58x12x12BK-CS20 Drainage, Black Case-20305 x 305mm 16 mm 540.58x12x12BK-CS20 Drainage, Black Case-20305 x 305mm 16 mm 540.58x12x12BK-CS20 Drainage, Black Case-20305 x 305mm 16 mm 540.58x12x12BK-CS20 Drainage, Black Case-20305 x 305mm 16 mm 540.58x12x12BK-CS20 Drainage, Black Case-20305 x 305mm 16 mm 540.58x12x12BK-CS20 Drainage, Black Case-20305 x 305mm 16 mm 540.58x12x12BK-CS20 Drainage, Black Case-20305 x 305mm 16 mm 540.58x12x12BK-CS20 Drainage, Black Case-20305 x 305 mm 16 mm 541.58x12x12BK-CS20 Solid, Black305 x 305 mm 16 mm 541.58x12x12BK-CS20 Solid, Black305 x 305 mm 16 mm 541.58x12x12BK-CS20 Solid, Black305 x 305 mm 16 mm 541.58x12x12BK-CS20 Solid, Black305 x 305 mm 16 mm 541.58x12x12BK-CS20 Solid, Black305 x 305 mm 16 mm 541.58x12x12BK-CS20 Solid, Black305 x 305 mm 16 mm 541.58x12x12BK-CS20 Solid, Black305 x 305 mm 16 mm 541.58x12x12BK-CS20 Solid, Black Case-2076 x 305 mm 16 mm 540.58x3x12-CS20 Ramp, Yellow76 x 305 mm 16 mm 540.58x3x12-CS20 Ramp, Yellow76 x 305 mm 16 mm 540.58x3x12-CS20 Ramp, Yellow76 x 305 mm 16 mm 540.58x3x12-CS20 Ramp, Yellow76 x 305 mm 16 mm 540.58x3x12-CS20 Ramp, Yellow76 x 305 mm 16 mm 540.58x3x12-CS20 Ramp, Yellow76 x 305 mm 16 mm 540.58x3x12-CS20 Ramp, Yellow76 x 305 mm 16 mm 540.58x3x12-CS20 Ramp, Yellow76 x 305 mm 16 mm 540.58x3x12-CS20 Ramp, Yellow76 x 305 mm 16 mm 540.58x3x12-CS20 Ramp, Yellow76 x 305 mm 16 mm 540.58x3x12-CS20 Ramp, Yellow Case-2076 x 380 mm 16 mm 540.58x3x15-CS4 Ramp w/ Corner, Yellow Case-476 x 380 mm 16 mm 540.58x3x15-CS4 Ramp w/ Corner, Yellow Case-476 x 380 mm 16 mm 540.58x3x15-CS4 Ramp w/ Corner, Yellow Case-476 x 380 mm 16 mm 540.58x3x15-CS4 Ramp w/ Corner, Yellow Case-476 x 380 mm 16 mm 540.58x3x15-CS4 Ramp w/ Corner, Yellow Case-476 x 380 mm 16 mm 540.58x3x15-CS4 Ramp w/ Corner, Yellow Case-476 x 380 mm 16 mm 540.58x3x15-CS4 Ramp w/ Corner, Yellow Case-476 x 380 mm 16 mm 540.58x3x15-CS4 Ramp w/ Corner, Yellow Case-476 x 380 mm 16 mm 540.58x3x15-CS4 Ramp w/ Corner, Yellow Case-476 x 380 mm 16 mm 540.58x3x15-CS4 Ramp w/ Corner, Yellow Case-476 x 380 mm 16 mm 540.58x3x15-CS4 Ramp w/ Corner, Yellow Case-476 x 380 mm 16 mm 540.58x3x15-CS4 Ramp w/ Corner, Yellow Case-476 x 380 mm 16 mm 540.58x3x15-CS4 Ramp w/ Corner, Yellow Case-476 x 380 mm 16 mm 540.58x3x15-CS4 Ramp w/ Corner, Yellow Case-476 x 305 mm 16 mm 540.58x3x12-CS20 Ramp, Black76 x 305 mm 16 mm 540.58x3x12-CS20 Ramp, Black76 x 305 mm 16 mm 540.58x3x12-CS20 Ramp, Black76 x 305 mm 16 mm 540.58x3x12-CS20 Ramp, Black76 x 305 mm 16 mm 540.58x3x12-CS20 Ramp, Black76 x 305 mm 16 mm 540.58x3x12-CS20 Ramp, Black76 x 305 mm 16 mm 540.58x3x12-CS20 Ramp, Black76 x 305 mm 16 mm 540.58x3x12-CS20 Ramp, Black76 x 305 mm 16 mm 540.58x3x12-CS20 Ramp, Black76 x 305 mm 16 mm 540.58x3x12-CS20 Ramp, Black76 x 305 mm 16 mm 540.58x3x12-CS20 Ramp, Black76 x 305 mm 16 mm 540.58x3x12-CS20 Ramp, Black Case-2076 x 380 mm 16 mm 540.58x3x15-CS4 Ramp w/ Corner, Black Case-476 x 380 mm 16 mm 540.58x3x15-CS4 Ramp w/ Corner, Black Case-476 x 380 mm 16 mm 540.58x3x15-CS4 Ramp w/ Corner, Black Case-476 x 380 mm 16 mm 540.58x3x15-CS4 Ramp w/ Corner, Black Case-476 x 380 mm 16 mm 540.58x3x15-CS4 Ramp w/ Corner, Black Case-476 x 380 mm 16 mm 540.58x3x15-CS4 Ramp w/ Corner, Black Case-476 x 380 mm 16 mm 540.58x3x15-CS4 Ramp w/ Corner, Black Case-476 x 380 mm 16 mm 540.58x3x15-CS4 Ramp w/ Corner, Black Case-476 x 380 mm 16 mm 540.58x3x15-CS4 Ramp w/ Corner, Black Case-476 x 380 mm 16 mm 540.58x3x15-CS4 Ramp w/ Corner, Black Case-4

DrainageFor use in wet areas.

Ramp

SolidFor use in dryry areas.

Patented LockSafe interlockingsystem for a positiveositive connection.305 mm

305305 mm

380 mmRampwithCorner

F.I.T.™ Functional Interlocking Tiles>80%>80%

7

ERGONOM

IC FLOORING

F.I.T.™ Functional Interlocking Tiles interconnect to form a Positive Lock. The Positive Lock allows the flooring system to stay together seamlessly and be rolled up for maintenance or relocation. A Positive Lock will not separate unless you intentionally unzip them. ErgoDeck® (pg. 6) also features this locking system.

Industrial & Com

mercial

DrainageDrainageDrainageDrainageuse in wet areas.

Specifications && TTestingestingTTestingTTCompound Recycled PVCEdges Optional 76 mm wide rampsFlammability per MVSS 302 “A” Rating

Coefficient of Friction per ASTM F 1677 No. 540: Dry - .81, Wet - .49No. 541: Dry - 1.1, Wet - .63

Tabor Abrasion per Fed. Std. 191 < 1% lostWarranty 1 year

Diamond-Plate Matting

Black (BK)BK)

Black/YellowBlack/Yellow ((BYL)BYL)

The Diamond Plate pattern is, without question, the most popular surface design in ergonomic matting and for very good reasons. Diamond Plate is easy to clean and tough! It provides good traction to help prevent slips and falls. And it looks really cool!

But, are all ergonomic mats with a Diamond Plate pattern on the surface the same? ABSOLUTELY NOT! As a matter of fact, what differentiates these products is what you can’t see – THE SPONGE MATERIAL.

Beneath that rugged Diamond Plate surface lies the true heart and soul of the mat – the sponge. The properties of the sponge dictate how the mat will perform in critical criteria such as:

Wearwell introduced the first Diamond Plate mat to the market way back in 1989. And Wearwell has been the Innovator in Diamond Plate matting ever since. Today, Wearwell offers more sponge alternatives than any competitor, including:

• Nitricell®: #1 in market share and customer satisfaction for over 20 years, this Nitrile rubber enhanced sponge is the standard by which all others are measured – and fall short!

• Flex-Link™: A simple PVC sponge, designed to provide an alternative similar to what most competitors offer, at a similar price point.

• SMART®: A Rebound Urethane sponge that combines comfort, ecology and economy in a unique product available only from Wearwell.

So don’t be fooled by all the “Look Alike” Diamond Plate products out there. Choose from Wearwell’s unparalleled range of sponge alternatives to provide you the perfect Diamond Plate product for your needs.

» Overall Comfort

» Longevity In Application

» Ability To Customize

» Mat Movement On Polished Floors

» Contribution To Green Initiatives

» Price Of The Mat

8

ERGO

NOM

IC M

ATTI

NG

Indu

stri

al

Magnified grit surface

ERGONOM

IC MATTIN

G

9

>80%>80% 50% 50%

Diamond-Plate Matting

50% 50%

BETTERBEST GOODIndustrial

SPONGECOTESPONGECOTE®® SELECTSELECT SMARTSMART®®

Products UltraSoft Diamond-Plate No. 414, Diamond-Plate UltraSoft Diamond-Plate No. 414, Diamond-Plate SpongeCote No. 415 and Diamond-Plate with SpongeCote No. 415 and Diamond-Plate with GritWorks!GritWorks!®® No. 416 No. 416

Diamond-Plate Select No. 495Diamond-Plate Select No. 495 SMART Diamond-Plate No. 497SMART Diamond-Plate No. 497

Description Outperforms other Diamond-Plate sponge products. Outperforms other Diamond-Plate sponge products. Our pre-beveled edge assures a perfect lays flat quality. Our pre-beveled edge assures a perfect lays flat quality. We also extend the sponge within 25 mm of the mat’s We also extend the sponge within 25 mm of the mat’s surface for 20% more standing area than others in the surface for 20% more standing area than others in the market. 2X the resilience and 3X the life of look-alikes!market. 2X the resilience and 3X the life of look-alikes!

High-tech industrial surface withstands High-tech industrial surface withstands heavy use while its specially formulated heavy use while its specially formulated blown-vinyl Flex-Link™ sponge base blown-vinyl Flex-Link™ sponge base lessens standing worker fatigue.lessens standing worker fatigue.

An economical and Green solution for An economical and Green solution for preventing worker fatigue. Comfort and preventing worker fatigue. Comfort and resilience that surpasses traditional resilience that surpasses traditional sponges.sponges.

Sponge base Nitricell—a premium Nitrile rubber composite sponge Nitricell—a premium Nitrile rubber composite sponge formulated for crush-resistance and extended formulated for crush-resistance and extended performance.performance.

Dense, closed cell PVC sponge Dense, closed cell PVC sponge designed with similar performance designed with similar performance characteristics to others on the market.characteristics to others on the market.

A recycled urethane composite sponge, A recycled urethane composite sponge, less durable overall, but truly designed less durable overall, but truly designed for budget or environmentally conscious for budget or environmentally conscious operations.operations.operations.

Resilience Best in its class. It continues to bounce back and Best in its class. It continues to bounce back and provides long-term employee satisfaction.provides long-term employee satisfaction.

Good resilience, good recovery. Good rebound, proven for use in many Good resilience, good recovery. Good rebound, proven for use in many Good resilience, good recovery. Good rebound, proven for use in many Good resilience, good recovery. Good rebound, proven for use in many Good resilience, good recovery. Good rebound, proven for use in many commercial applications as a flooring commercial applications as a flooring system underlayment.system underlayment.system underlayment.system underlayment.

Standing Area Extends to within 25 mm of the edge of the mat Extends to within 25 mm of the edge of the mat providing more standing room. providing more standing room.

The sponge extends to within 50 to 76 The sponge extends to within 50 to 76 mm of each edge.mm of each edge.

The sponge extends to within 50 to 76 The sponge extends to within 50 to 76 mm of each edge.mm of each edge.

Bevel Sponge offers built-in trip prevention bevel on standard Sponge offers built-in trip prevention bevel on standard sizes.sizes.

Sponge features rounded corners on Sponge features rounded corners on stock sizes.stock sizes.

Sponge edges are not beveled.Sponge edges are not beveled.

Warranty 4 years 3 years 1 year

Thicknesses Available in two thicknesses.Available in two thicknesses. Available in two thicknesses. Available in two thicknesses.

Colours Black (BK) or Black/Yellow (BYL). Note: Diamond-Plate Black (BK) or Black/Yellow (BYL). Note: Diamond-Plate w/ GritWorks!w/ GritWorks!®® is only available in Black. is only available in Black.

Black (BK) or Black/Yellow (BYL). Black (BK) or Black/Yellow (BYL). Black (BK) or Black/Yellow (BYL). Black (BK) or Black/Yellow (BYL). Black (BK) or Black/Yellow (BYL). Black (BK) or Black/Yellow (BYL). Black (BK) or Black/Yellow (BYL). Black (BK) or Black/Yellow (BYL). Black (BK) or Black/Yellow (BYL). Black (BK) or Black/Yellow (BYL).

Customization,Application andGREEN Rating

TestingTestingTesting DDataataFlammability (surface)(surface)

MVSS 302: “A” RatingMVSS 302: “A” Rating MVSS 302: “A” RatingMVSS 302: “A” Rating MVSS 302: “A” RatingMVSS 302: “A” Rating

Flammability (sponge)(sponge)

MIL-P12420C: Burned for < 5 secondsMIL-P12420C: Burned for < 5 seconds DOC FF1-70: Flame Retardant Rating HMIS = 1 Flash Point: >200DOC FF1-70: Flame Retardant Rating HMIS = 1 Flash Point: >200DOC FF1-70: Flame Retardant Rating HMIS = 1 Flash Point: >200DOC FF1-70: Flame Retardant Rating HMIS = 1 Flash Point: >200DOC FF1-70: Flame Retardant Rating HMIS = 1 Flash Point: >200ooC Open C Open Cup, NFPA = 1Cup, NFPA = 1Cup, NFPA = 1

Coefficient of Friction per ASTM F1677

No. 414 & No. 415: Dry: .68No. 414 & No. 415: Dry: .68No. 416: Dry: 1.10, Wet: 1.0No. 416: Dry: 1.10, Wet: 1.0

Dry: .68Dry: .68 Dry: .68Dry: .68

Tabor Abrasion Fed. Std. 191: < 1% lost @ 1,000 cyclesFed. Std. 191: < 1% lost @ 1,000 cycles Fed. Std. 191: < 1% lost @ 1,000 Fed. Std. 191: < 1% lost @ 1,000 cyclescyclescycles

Fed. Std. 191: < 1% lost @ 1,000 Fed. Std. 191: < 1% lost @ 1,000 cyclescyclescycles

PartPart NNumbersumbers

Sizes UOM 2424 mmmm 1414 mmmm w/w/ GGritWorks!ritWorks!1144 mmm*m* 1414 mmmm 2525 mmm*m* 1616 mmmm

.61 x .91 m EA 414.1516x2x3 415.916x2x3 416.916x2x3BK.61 x .91 m EA 414.1516x2x3 415.916x2x3 416.916x2x3BK.61 x .91 m EA 414.1516x2x3 415.916x2x3 416.916x2x3BK.61 x .91 m EA 414.1516x2x3 415.916x2x3 416.916x2x3BK.61 x .91 m EA 414.1516x2x3 415.916x2x3 416.916x2x3BK.61 x .91 m EA 414.1516x2x3 415.916x2x3 416.916x2x3BK.61 x .91 m EA 414.1516x2x3 415.916x2x3 416.916x2x3BK 495.916x2x3495.916x2x3 497.1x2x3 497.58x2x3497.1x2x3 497.58x2x3497.1x2x3 497.58x2x3

.91 x 1.52 m EA 414.1516x3x5 415.916x3x5 416.916x3x5BK.91 x 1.52 m EA 414.1516x3x5 415.916x3x5 416.916x3x5BK.91 x 1.52 m EA 414.1516x3x5 415.916x3x5 416.916x3x5BK.91 x 1.52 m EA 414.1516x3x5 415.916x3x5 416.916x3x5BK.91 x 1.52 m EA 414.1516x3x5 415.916x3x5 416.916x3x5BK.91 x 1.52 m EA 414.1516x3x5 415.916x3x5 416.916x3x5BK.91 x 1.52 m EA 414.1516x3x5 415.916x3x5 416.916x3x5BK 495.916x3x5495.916x3x5 497.1x3x5 497.58x3x5497.1x3x5 497.58x3x5497.1x3x5 497.58x3x5

.61 x 22.86 m RL 414.1516x2x75 415.916x2x75 n/a.61 x 22.86 m RL 414.1516x2x75 415.916x2x75 n/a.61 x 22.86 m RL 414.1516x2x75 415.916x2x75 n/a.61 x 22.86 m RL 414.1516x2x75 415.916x2x75 n/a.61 x 22.86 m RL 414.1516x2x75 415.916x2x75 n/a.61 x 22.86 m RL 414.1516x2x75 415.916x2x75 n/a.61 x 22.86 m RL 414.1516x2x75 415.916x2x75 n/a 495.916x2x75495.916x2x75 n/an/a 497.58x2x75497.58x2x75

.91 x 22.86 m RL 414.1516x3x75 415.916x3x75 416.916x3x75BK.91 x 22.86 m RL 414.1516x3x75 415.916x3x75 416.916x3x75BK.91 x 22.86 m RL 414.1516x3x75 415.916x3x75 416.916x3x75BK.91 x 22.86 m RL 414.1516x3x75 415.916x3x75 416.916x3x75BK.91 x 22.86 m RL 414.1516x3x75 415.916x3x75 416.916x3x75BK.91 x 22.86 m RL 414.1516x3x75 415.916x3x75 416.916x3x75BK.91 x 22.86 m RL 414.1516x3x75 415.916x3x75 416.916x3x75BK 495.916x3x75495.916x3x75 n/an/a 497.58x3x75497.58x3x751.22 x 22.86 m RL 414.1516x4x75 415.916x4x75 n/a1.22 x 22.86 m RL 414.1516x4x75 415.916x4x75 n/a1.22 x 22.86 m RL 414.1516x4x75 415.916x4x75 n/a1.22 x 22.86 m RL 414.1516x4x75 415.916x4x75 n/a1.22 x 22.86 m RL 414.1516x4x75 415.916x4x75 n/a1.22 x 22.86 m RL 414.1516x4x75 415.916x4x75 n/a1.22 x 22.86 m RL 414.1516x4x75 415.916x4x75 n/a n/an/a n/an/a n/an/a.61, .91 or 1.22 m widths cut up to 22.86 m are also available. All sizes are available in .61, .91 or 1.22 m widths cut up to 22.86 m are also available. All sizes are available in .61, .91 or 1.22 m widths cut up to 22.86 m are also available. All sizes are available in Black (BK) or Black with Yellow Borders (BYL)*. Specify colour when ordering. Black (BK) or Black with Yellow Borders (BYL)*. Specify colour when ordering. Black (BK) or Black with Yellow Borders (BYL)*. Specify colour when ordering.

*Diamond-Plate SpongeCote w/ GritWorks! No. 416 is available in Black (BK) only.*Diamond-Plate SpongeCote w/ GritWorks! No. 416 is available in Black (BK) only.*Diamond-Plate SpongeCote w/ GritWorks! No. 416 is available in Black (BK) only.*Diamond-Plate SpongeCote w/ GritWorks! No. 416 is available in Black (BK) only.*Diamond-Plate SpongeCote w/ GritWorks! No. 416 is available in Black (BK) only.*Diamond-Plate SpongeCote w/ GritWorks! No. 416 is available in Black (BK) only.*Diamond-Plate SpongeCote w/ GritWorks! No. 416 is available in Black (BK) only.*Diamond-Plate SpongeCote w/ GritWorks! No. 416 is available in Black (BK) only.

.61 or .91 m widths cut up to 22.86 m are also available. All sizes are available in Black .61 or .91 m widths cut up to 22.86 m are also available. All sizes are available in Black .61 or .91 m widths cut up to 22.86 m are also available. All sizes are available in Black .61 or .91 m widths cut up to 22.86 m are also available. All sizes are available in Black (BK) or Black with Yellow Borders (BYL). Specify colour when ordering. *25 mm thickness (BK) or Black with Yellow Borders (BYL). Specify colour when ordering. *25 mm thickness (BK) or Black with Yellow Borders (BYL). Specify colour when ordering. *25 mm thickness (BK) or Black with Yellow Borders (BYL). Specify colour when ordering. *25 mm thickness not available in cut lengths.not available in cut lengths.

SurfaceSurface llaysays ooverver ssquarequare sspongepongettoo ccreatereate tthehe bbevel.evel.

UltraSoft UltraSoft

Standard Standard

Pre-beveledPre-beveled sspongeponge ggivesives mmatat iitstsllayay fflatlat ccharacteristics.haracteristics.

2424 mmmm 25 mmmm

1414 mmmm 16 mmmm

1414 mmmm

SurfaceSurface llaysays ooverver rroundedoundedsspongeponge ttoo ccreatereate tthehe bbevel.evel.

Good resilience, good recovery. Good rebound, proven for use in many Good resilience, good recovery. Good rebound, proven for use in many Good resilience, good recovery. Good rebound, proven for use in many

Black (BK) or Black/Yellow (BYL). Black (BK) or Black/Yellow (BYL). Black (BK) or Black/Yellow (BYL). Black (BK) or Black/Yellow (BYL). Black (BK) or Black/Yellow (BYL). Black (BK) or Black/Yellow (BYL).

DOC FF1-70: Flame Retardant Rating HMIS = 1 Flash Point: >200DOC FF1-70: Flame Retardant Rating HMIS = 1 Flash Point: >200DOC FF1-70: Flame Retardant Rating HMIS = 1 Flash Point: >200

WeldSafe® No. 447» Dramatically reduces fatigue while withstanding the challenges of welding

environments.

» Specially formulated to repel sparks and hot metal shards, the thick rubber surface has a melt point of over 260°C.

» The super resilient Nitricell® sponge base is a Nitrile rubber composite that offers optimal comfort.

» All edges are safety beveled.

Pebbled surfacefor traction and torepel sparks andhot metal shards.

Black (BK)

SizeSize Thickness PartThickness PartThickness Part NNumberumber UOMUOM.61 x .91 m 14 mm 447.916x2x3BK14 mm 447.916x2x3BK EA.91 x 1.52 m 14 mm 447.916x3x5BK14 mm 447.916x3x5BK EA.61 x 22.86 m 14 mm 447.916x2x75BK RL14 mm 447.916x2x75BK RL14 mm 447.916x2x75BK RL.91 x 22.86 m 14 mm 447.916x3x75BK RL14 mm 447.916x3x75BK RL14 mm 447.916x3x75BK RL.91 m widths cut up to 22.86 m are also available. All sizes are available in Black (BK) only.Black (BK) only.

» This extra-thick, drainage mat is designed for overall productivity.

» WorkSafe’s premium natural rubber compound is ideal for use around water, mild WorkSafe’s premium natural rubber compound is ideal for use around water, mild Wchemicals and detergent solutions.

» Also an excellent choice for areas with wood or metal shavings.

» Mats with yellow borders are available in standard or custom sizes.

» The mats can be used as individual workstation mats or attached together with connector strips.

» 22 mm thick.

» Colours: Mat—Black (BK), Edging—Yellow (YL), Black (BK).

ConnectorConnector ttoo ccreatereate llongeronger rrunnersunners

WorkSafe® No. 477

Size Thickness Description/Colour PartSize Thickness Description/Colour PartSize Thickness Description/Colour PartSize Thickness Description/Colour PartSize Thickness Description/Colour PartSize Thickness Description/Colour PartSize Thickness Description/Colour PartSize Thickness Description/Colour PartSize Thickness Description/Colour Part NNumber UOMumber UOMumber UOM1.02 x 1.32 m 22 mm Mat/Black, Edging/Yellow 477.78x40x52BYL EA1.02 x 1.32 m 22 mm Mat/Black, Edging/Yellow 477.78x40x52BYL EA1.02 x 1.32 m 22 mm Mat/Black, Edging/Yellow 477.78x40x52BYL EA1.02 x 1.32 m 22 mm Mat/Black, Edging/Yellow 477.78x40x52BYL EA1.02 x 1.32 m 22 mm Mat/Black, Edging/Yellow 477.78x40x52BYL EA

1.02 x 1.63 m 22 mm Mat/Black, Edging/Yellow 477.78x40x64BYL EA1.02 x 1.63 m 22 mm Mat/Black, Edging/Yellow 477.78x40x64BYL EA1.02 x 1.63 m 22 mm Mat/Black, Edging/Yellow 477.78x40x64BYL EA1.02 x 1.63 m 22 mm Mat/Black, Edging/Yellow 477.78x40x64BYL EA1.02 x 1.63 m 22 mm Mat/Black, Edging/Yellow 477.78x40x64BYL EA

1.22 x 1.52 m 22 mm Mat/Black1.22 x 1.52 m 22 mm Mat/Black1.22 x 1.52 m 22 mm Mat/Black 477.78x3x4GRBK EA477.78x3x4GRBK EA

1.22 x 1.52 m 22 mm Mat/Black1.22 x 1.52 m 22 mm Mat/Black1.22 x 1.52 m 22 mm Mat/Black 477.78x3x5GRBK EA477.78x3x5GRBK EA

n/a 22 mm Edging/ Black22 mm Edging/ Black 477.EdgingRollBK EA477.EdgingRollBK EA

n/a 22 mm Edging/Yellow22 mm Edging/Yellow 477.EdgingRollYL EA477.EdgingRollYL EA

n/a 22 mm Connector/Black Connector.WSH.BK EA22 mm Connector/Black Connector.WSH.BK EA22 mm Connector/Black Connector.WSH.BK EA22 mm Connector/Black Connector.WSH.BK EA

SpecificationsSpecificationsSpecifications && TTestingestingestingTTestingTTCompoundCompound 100% Natural rubberEdgesEdges Safety beveledSafety beveledFlammability (surface) Flammability (surface) MVSS 302: “A” RatingMVSS 302: “A” RatingCoefficient of Friction ASTM F1677: Dry: .90, Wet: .36ASTM F1677: Dry: .90, Wet: .36Tabor Abrasion Fed. Std. 191: < 1% lost @ 1,000 cyclesFed. Std. 191: < 1% lost @ 1,000 cyclesWarrantyWarranty 3 years3 years

SpecificationsSpecificationsSpecifications && TTestingestingestingestingTTestingTTCompound Compound Natural rubber compound Natural rubber compound Edges Edges Optional unattached safety edging Optional unattached safety edging FlammabilityFlammability MVSS 302: “A” RatingMVSS 302: “A” RatingCoefficient of Friction ASTM F1677: Dry: > .90, Wet: .36 ASTM F1677: Dry: > .90, Wet: .36 Durometer ASTM D2240: 55 WarrantyWarranty 1 year1 year

100% Natural rubber Raised ribs for traction

22 mmmm

Knobs to prevent slippage

>33%>33%

>20%>20%

Anti-Fatigue

WearResistance

SlipResistance

min. 1 2 3 4 5max.

Anti-Fatigue

WearResistance

SlipResistance

min. 1 2 3 4 5max.

Black w/w/w YellowYellowYBordersorders ((BYL)BYL)

Black w/w/w BlackBordersorders ((BK)BK)

10

ERGO

NOM

IC M

ATTI

NG

Thicker rubber surface

14 mm

Nitricell® sponge base

Indu

stri

al

» SSubstantial, modular anti-fatigue mats keep workers productive, ubstantial, modular anti-fatigue mats keep workers productive, safe, and comfortable all day.

» These .91 x .91 m mats interlock on all sides to cover entire floor areas, long assembly lines, or stand alone as single workstation mats.

» 16 mm thick.

» Two (2) surface designs: Two (2) surface designs: T

1. Open—with large holes for drainage. Also available with a grit surface for increased traction.

2. Solid—for dry areas. Also available with a grit surface for increased traction.

» Optional 76 x 990 mm yellow safety beveled ramps (GR ramps go with GR Mats, and NBR ramps go with NBR Mats).

» Colours: Mat—Black (BK), Ramps—Yellow (YL) or Black (BK).TypeTypeType WetWet AAreas Dryreas Dryreas Dryreas Dryreas Dry AAreas w/reas w/reas w/ GGrit Generalrit Generalrit General PPurpose Nitrileurpose Nitrileurpose Nitrileurpose Nitrileurpose NitrileSolid n n n

DrainageDrainage n n n

Solid w/ GritWorks! n n n

Drainage w/ GritWorks!Drainage w/ GritWorks! n n n

24/SevenDrainage

76 x 990 mmMale (M) Rampsnaps into the underside of themat.

24/Seven® Simple. Modular. Easy to Use.

Size Thickness DescriptionSize Thickness DescriptionSize Thickness DescriptionSize Thickness DescriptionSize Thickness DescriptionSize Thickness DescriptionSize Thickness Description PartPart NNumberumber UOMUOM.91 x .91 m 16 mm Solid Mat, GR.91 x .91 m 16 mm Solid Mat, GR.91 x .91 m 16 mm Solid Mat, GR 570.58x3x3GRBK EA570.58x3x3GRBK EA.91 x .91 m 16 mm Solid Mat, .91 x .91 m 16 mm Solid Mat, .91 x .91 m 16 mm Solid Mat, NBR 570.58x3x3NBRBK EA570.58x3x3NBRBK EA.91 x .91 m 16 mm Drainage Mat, GR.91 x .91 m 16 mm Drainage Mat, GR.91 x .91 m 16 mm Drainage Mat, GR.91 x .91 m 16 mm Drainage Mat, GR.91 x .91 m 16 mm Drainage Mat, GR.91 x .91 m 16 mm Drainage Mat, GR.91 x .91 m 16 mm Drainage Mat, GR.91 x .91 m 16 mm Drainage Mat, GR 572.58x3x3GRBK EA572.58x3x3GRBK EA.91 x .91 m 16 mm Drainage Mat, .91 x .91 m 16 mm Drainage Mat, .91 x .91 m 16 mm Drainage Mat, .91 x .91 m 16 mm Drainage Mat, .91 x .91 m 16 mm Drainage Mat, .91 x .91 m 16 mm Drainage Mat, .91 x .91 m 16 mm Drainage Mat, .91 x .91 m 16 mm Drainage Mat, NBR 572.58x3x3NBRBK EA572.58x3x3NBRBK EA.91 x .91 m 16 mm Solid Mat, w/ GritWorks!, .91 x .91 m 16 mm Solid Mat, w/ GritWorks!, .91 x .91 m 16 mm Solid Mat, w/ GritWorks!, NBR 574.58x3x3NBRBK EA574.58x3x3NBRBK EA.91 x .91 m 16 mm Open Mat, w/ GritWorks!, .91 x .91 m 16 mm Open Mat, w/ GritWorks!, .91 x .91 m 16 mm Open Mat, w/ GritWorks!, .91 x .91 m 16 mm Open Mat, w/ GritWorks!, .91 x .91 m 16 mm Open Mat, w/ GritWorks!, .91 x .91 m 16 mm Open Mat, w/ GritWorks!, NBR 576.58x3x3NBRBK EA576.58x3x3NBRBK EA76 x 990 mm 16 mm Edging, Male, GR, Yellow 572.EDGINGMGRYL EA76 x 990 mm 16 mm Edging, Male, GR, Yellow 572.EDGINGMGRYL EA76 x 990 mm 16 mm Edging, Male, GR, Yellow 572.EDGINGMGRYL EA76 x 990 mm 16 mm Edging, Male, GR, Yellow 572.EDGINGMGRYL EA76 x 990 mm 16 mm Edging, Male, GR, Yellow 572.EDGINGMGRYL EA76 x 990 mm 16 mm Edging, Male, GR, Yellow 572.EDGINGMGRYL EA76 x 990 mm 16 mm Edging, Male, GR, Yellow 572.EDGINGMGRYL EA76 x 990 mm 16 mm Edging, Male, GR, Yellow 572.EDGINGMGRYL EA76 x 990 mm 16 mm Edging, Male, GR, Yellow 572.EDGINGMGRYL EA76 x 990 mm 16 mm Edging, Male, GR, Yellow 572.EDGINGMGRYL EA76 x 990 mm 16 mm Edging, Male, GR, Yellow 572.EDGINGMGRYL EA76 x 990 mm 16 mm Edging, Male, GR, Yellow 572.EDGINGMGRYL EA76 x 990 mm 16 mm Edging, Male, GR, Yellow 572.EDGINGMGRYL EA76 x 990 mm 16 mm Edging, Male, GR, Yellow 572.EDGINGMGRYL EA76 x 990 mm 16 mm Edging, Female, GR, Yellow 572.EDGINGFGRYL EA76 x 990 mm 16 mm Edging, Female, GR, Yellow 572.EDGINGFGRYL EA76 x 990 mm 16 mm Edging, Female, GR, Yellow 572.EDGINGFGRYL EA76 x 990 mm 16 mm Edging, Female, GR, Yellow 572.EDGINGFGRYL EA76 x 990 mm 16 mm Edging, Female, GR, Yellow 572.EDGINGFGRYL EA76 x 990 mm 16 mm Edging, Female, GR, Yellow 572.EDGINGFGRYL EA76 x 990 mm 16 mm Edging, Female, GR, Yellow 572.EDGINGFGRYL EA76 x 990 mm 16 mm Edging, Female, GR, Yellow 572.EDGINGFGRYL EA76 x 990 mm 16 mm Edging, Female, GR, Yellow 572.EDGINGFGRYL EA76 x 990 mm 16 mm Edging, Female, GR, Yellow 572.EDGINGFGRYL EA76 x 990 mm 16 mm Edging, Female, GR, Yellow 572.EDGINGFGRYL EA76 x 990 mm 16 mm Edging, Female, GR, Yellow 572.EDGINGFGRYL EA76 x 990 mm 16 mm Edging, Female, GR, Yellow 572.EDGINGFGRYL EA76 x 990 mm 16 mm Edging, Female, GR, Yellow 572.EDGINGFGRYL EA76 x 990 mm 16 mm Edging, Female, GR, Yellow 572.EDGINGFGRYL EA76 x 990 mm 16 mm Edging, Male, 76 x 990 mm 16 mm Edging, Male, 76 x 990 mm 16 mm Edging, Male, 76 x 990 mm 16 mm Edging, Male, 76 x 990 mm 16 mm Edging, Male, 76 x 990 mm 16 mm Edging, Male, 76 x 990 mm 16 mm Edging, Male, 76 x 990 mm 16 mm Edging, Male, 76 x 990 mm 16 mm Edging, Male, NBR, Yellow 572.EDGINGMNBRYL EA, Yellow 572.EDGINGMNBRYL EA, Yellow 572.EDGINGMNBRYL EA76 x 990 mm 16 mm Edging, Female, 76 x 990 mm 16 mm Edging, Female, 76 x 990 mm 16 mm Edging, Female, 76 x 990 mm 16 mm Edging, Female, 76 x 990 mm 16 mm Edging, Female, 76 x 990 mm 16 mm Edging, Female, 76 x 990 mm 16 mm Edging, Female, 76 x 990 mm 16 mm Edging, Female, NBR, Yellow 572.EDGINGFNBRYL EA, Yellow 572.EDGINGFNBRYL EA, Yellow 572.EDGINGFNBRYL EA76 x 990 mm 16 mm Edging, Male, GR, Black 572.EDGINGMGRBK EA76 x 990 mm 16 mm Edging, Male, GR, Black 572.EDGINGMGRBK EA76 x 990 mm 16 mm Edging, Male, GR, Black 572.EDGINGMGRBK EA76 x 990 mm 16 mm Edging, Male, GR, Black 572.EDGINGMGRBK EA76 x 990 mm 16 mm Edging, Male, GR, Black 572.EDGINGMGRBK EA76 x 990 mm 16 mm Edging, Male, GR, Black 572.EDGINGMGRBK EA76 x 990 mm 16 mm Edging, Male, GR, Black 572.EDGINGMGRBK EA76 x 990 mm 16 mm Edging, Male, GR, Black 572.EDGINGMGRBK EA76 x 990 mm 16 mm Edging, Male, GR, Black 572.EDGINGMGRBK EA76 x 990 mm 16 mm Edging, Male, GR, Black 572.EDGINGMGRBK EA76 x 990 mm 16 mm Edging, Male, GR, Black 572.EDGINGMGRBK EA76 x 990 mm 16 mm Edging, Male, GR, Black 572.EDGINGMGRBK EA76 x 990 mm 16 mm Edging, Male, GR, Black 572.EDGINGMGRBK EA76 x 990 mm 16 mm Edging, Male, GR, Black 572.EDGINGMGRBK EA76 x 990 mm 16 mm Edging, Female, GR, Black 572.EDGINGFGRBK EA76 x 990 mm 16 mm Edging, Female, GR, Black 572.EDGINGFGRBK EA76 x 990 mm 16 mm Edging, Female, GR, Black 572.EDGINGFGRBK EA76 x 990 mm 16 mm Edging, Female, GR, Black 572.EDGINGFGRBK EA76 x 990 mm 16 mm Edging, Female, GR, Black 572.EDGINGFGRBK EA76 x 990 mm 16 mm Edging, Female, GR, Black 572.EDGINGFGRBK EA76 x 990 mm 16 mm Edging, Female, GR, Black 572.EDGINGFGRBK EA76 x 990 mm 16 mm Edging, Female, GR, Black 572.EDGINGFGRBK EA76 x 990 mm 16 mm Edging, Female, GR, Black 572.EDGINGFGRBK EA76 x 990 mm 16 mm Edging, Female, GR, Black 572.EDGINGFGRBK EA76 x 990 mm 16 mm Edging, Female, GR, Black 572.EDGINGFGRBK EA76 x 990 mm 16 mm Edging, Female, GR, Black 572.EDGINGFGRBK EA76 x 990 mm 16 mm Edging, Female, GR, Black 572.EDGINGFGRBK EA76 x 990 mm 16 mm Edging, Female, GR, Black 572.EDGINGFGRBK EA76 x 990 mm 16 mm Edging, Female, GR, Black 572.EDGINGFGRBK EA76 x 990 mm 16 mm Edging, Male, 76 x 990 mm 16 mm Edging, Male, 76 x 990 mm 16 mm Edging, Male, 76 x 990 mm 16 mm Edging, Male, 76 x 990 mm 16 mm Edging, Male, 76 x 990 mm 16 mm Edging, Male, 76 x 990 mm 16 mm Edging, Male, 76 x 990 mm 16 mm Edging, Male, 76 x 990 mm 16 mm Edging, Male, NBR, Black 572.EDGINGMNBRBK EA, Black 572.EDGINGMNBRBK EA, Black 572.EDGINGMNBRBK EA76 x 990 mm 16 mm Edging, Female, 76 x 990 mm 16 mm Edging, Female, 76 x 990 mm 16 mm Edging, Female, 76 x 990 mm 16 mm Edging, Female, 76 x 990 mm 16 mm Edging, Female, 76 x 990 mm 16 mm Edging, Female, NBR, Black 572.EDGINGFNBRBK EA, Black 572.EDGINGFNBRBK EA, Black 572.EDGINGFNBRBK EA

24/SevenSolid

76 x 990 mm Female (F)Ramp snaps onto theprotuding mat knobs.

» Perfect for wet commercial or industrial areas.

» Grease-Resistant, natural rubber compound for use around water and mild fluids.

» Lightweight and easy to clean. Keeps employees comfortable.

» Functional drainage design.

» Molded beveled edges for easy access.

» 13 mm thick.

» Colour: Black (BK).

Black (BK)

WorkRite No. 474

SizeSize Thickness Colour PartThickness Colour PartThickness Colour PartThickness Colour Part NNumber UOMumber UOMumber UOM.91 x 1.52 m 13 mm Black 474.12x2x3BK EA.91 x 1.52 m 13 mm Black 474.12x2x3BK EA.91 x 1.52 m 13 mm Black 474.12x2x3BK EA.91 x 1.52 m 13 mm Black 474.12x2x3BK EA.91 x 1.52 m 13 mm Black 474.12x2x3BK EA.91 x 3.05 m 13 mm Black 474.12x3x10BK EA.91 x 3.05 m 13 mm Black 474.12x3x10BK EA.91 x 3.05 m 13 mm Black 474.12x3x10BK EA.91 x 3.05 m 13 mm Black 474.12x3x10BK EA.91 x 3.05 m 13 mm Black 474.12x3x10BK EA.91 x 6.10 m 13 mm Black 474.12x3x20BK EA.91 x 6.10 m 13 mm Black 474.12x3x20BK EA.91 x 6.10 m 13 mm Black 474.12x3x20BK EA.91 x 6.10 m 13 mm Black 474.12x3x20BK EA.91 x 6.10 m 13 mm Black 474.12x3x20BK EA

SpecificationsSpecificationsSpecifications && TTestingestingestingTTestingTTCompound Compound Natural rubber compoundNatural rubber compoundEdges Edges Integral molded safety edges Integral molded safety edges FlammabilityFlammability MVSS 302: “A” Rating. Flame spread of < 1.6MVSS 302: “A” Rating. Flame spread of < 1.6Coefficient of Friction ASTM F1677: Dry: > .90, Wet: .34 ASTM F1677: Dry: > .90, Wet: .34 Durometer ASTM D2240: 55 to 60 WarrantyWarranty 1 year1 year

>33%>33%

Magnified grit surfaceurfaceurface on No. 574and No. 576. This highigh performancegrit coating substantiallyubstantiallyubstantially increasestraction in wet areas.reas.reas.

Anti-Fatigue

WearResistance

SlipResistance

min. 1 2 3 4 5max.

Anti-Fatigue

WearResistance

SlipResistance

min. 1 2 3 4 5max.

AreasAreas ww//ww/ww WWateraterWWaterWW oorr DDryry DDebrisebris» Use the Grease Resistant

24/Seven Solid (No. 570) or Drainage (No. 572).

>50%>50%

» These include petrochemicals such as Hydrocarbons, Naphthenes, Paraffins and Petroleum distillates

» Use our 100% Nitrile (NBR) compound.

» For additional traction use the Nitrile Gritworks! Solid No. 574 (NBR) or Drainage No. 576 (NBR)

AreaswithPetroleum-basedFluids

11

ERGONOM

IC MATTIN

G

Optional edging

16 mm

NaturalNatural Rubberubber

1313 mm

Industrial

» Permanently anti-microbial and resist the growth of bacteria.

» Use in labs, pharmacies, medical and commercial buildings.

» The non-porous vinyl surface has an extra wear layer for abrasion and chemical resistance.

» The comfortable Nitrile rubber composite sponge base also resists the growth of bacteria.

» 13 mm thick.

» Available in custom sizes, unique shapes and widths.Available in custom sizes, unique shapes and widths.A

Blue (BL) Charcoal (CH) Gray (GY)

SizeSize Thickness PartThickness PartThickness Part NNumber UOMumber UOMumber UOM.61 x .91 m 13 mm 420.12x2x3 EA.91 x 1.52 m 13 mm 420.12x3x5 EA.61 x 18.29 m 13 mm.61 x 18.29 m 13 mm 420.12x2x60 RL420.12x2x60 RL.91 x 18.29 m 13 mm.91 x 18.29 m 13 mm 420.12x3x60 RL420.12x3x60 RL.61 or .91 m widths cut up to 18.29 m are available. Specify colour when ordering: Black (BK), Blue (BL), Charcoal (CH) or Gray (GY).

Tile-Top AM No. 420

Autoclavable Mat No. 580

SizeSize Thickness PartThickness PartThickness Part NNumber UOMumber UOMumber UOM.61 x .91 m 13 mm 580.12x2x3GY EA.61 x .91 m 13 mm 580.12x2x3GY EA.61 x .91 m 13 mm 580.12x2x3GY EA.61 x .91 m 13 mm 580.12x2x3GY EA

» 100% anti-microbial for sterile areas.

» 100% latex-Free, non-porous rubber compound.

» Withstands extensive sterilization, including autoclaving.

» Domed design provides long-lasting comfort for extended shifts.

SpecificationsSpecificationsSpecifications && TTestingestingestingestingTTestingTTCompound Compound SBR/Nitrile, anti-microbial additive passes ASTM G21-96 (2002) – Latex Free SBR/Nitrile, anti-microbial additive passes ASTM G21-96 (2002) – Latex Free Edges Edges Safety beveled Safety beveled Autoclavability Autoclavability 52 autoclave cycles – 12052 autoclave cycles – 120oC @ 15 psi C @ 15 psi Flammability MVSS 302: “A” RatingCoefficient of Friction ASTM F1677: Dry: .78, Wet: .68ASTM F1677: Dry: .78, Wet: .68Tabor Abrasion Fed. Std. 191 <1% lost @ 1,000g, CS-17 wheel, 1000 revsFed. Std. 191 <1% lost @ 1,000g, CS-17 wheel, 1000 revsWarrantyWarranty 1 year1 year

SpecificationsSpecificationsSpecifications && TTestingestingestingTTestingTTCompound Compound Non-porous vinyl surfaceNon-porous vinyl surfaceSponge Sponge Nitrile rubber Edges Edges Safety beveled Safety beveled Flammability (surface) MVSS 302: “A” Rating

Flammability (sponge) MIL-P12420CCoefficient of Friction Dry: .78Dry: .78

Tabor Abrasion Fed. Std. 191 <1% lost @ 1,000g, CS-17 wheel, 1000 revs

Anti-Microbial ASTM G21-96 (2002) PassesASTM G21-96 (2002) PassesWarrantyWarranty 4 years4 years

Non-porous rubber compound is 100% anti-microbial and is USP 797 compliant.

Gray (GY)

Anti-Fatigue

WearResistance

SlipResistance

min. 1 2 3 4 5max.

1212

ERGO

NOM

IC M

ATTI

NG

ERGO

NOM

IC M

ATTI

NG

ExtraExtra wear-layerear-layer && aanti-microbialnti-microbial ssurfaceurface

13 mm

NitrileNitrile rubberubber sspongeponge bbasease

1313 mmmmmmmm

SBR/NitrileSBR/Nitrile ((totallytotally(totally((totally( aanti-microbial)nti-microbial)

Lab,

Pha

rmac

euti

cal &

Hos

pita

lLa

b, P

harm

aceu

tica

l & H

ospi

tal

Black (BK)

SizeSize Thickness PartThickness PartThickness Part NNumber UOMumber UOMumber UOM.91 x 1.52 m 13 mm 478.12x3x5GY EA.91 x 1.52 m 13 mm 478.12x3x5GY EA.91 x 1.52 m 13 mm 478.12x3x5GY EA.91 x 1.52 m 13 mm 478.12x3x5GY EA.91 x 3.05 m 13 mm 478.12x3x10GY EA.91 x 3.05 m 13 mm 478.12x3x10GY EA.91 x 3.05 m 13 mm 478.12x3x10GY EA.91 x 3.05 m 13 mm 478.12x3x10GY EA.91 x 6.10 m 13 mm 478.12x3x20GY EA.91 x 6.10 m 13 mm 478.12x3x20GY EA.91 x 6.10 m 13 mm 478.12x3x20GY EA.91 x 6.10 m 13 mm 478.12x3x20GY EA

Black/Yellow(BYL)

» Blown PVC sponge reduces floor hardness up to 50%.

» Can easily be custom cut to fit your work areas.

» 10 mm overall thickness with safety rounded edges.

For use in all dry work areas.SoftStep No. 427

SizeSize (((m) Thickness Colourm) Thickness Colourm) Thickness Colourm) Thickness Colourm) Thickness Colourm) Thickness Colourm) Thickness Colour PartPart NNumber UOMumber UOMumber UOM.61 x .91 10 mm Black.61 x .91 10 mm Black.61 x .91 10 mm Black 427.38x2x3BK EA427.38x2x3BK EA.61 x .91 10 mm Black w/ Yellow Borders 427.38x2x3BYL EA.61 x .91 10 mm Black w/ Yellow Borders 427.38x2x3BYL EA.61 x .91 10 mm Black w/ Yellow Borders 427.38x2x3BYL EA.61 x .91 10 mm Black w/ Yellow Borders 427.38x2x3BYL EA.61 x .91 10 mm Black w/ Yellow Borders 427.38x2x3BYL EA.91 x 1.52 10 mm Black.91 x 1.52 10 mm Black.91 x 1.52 10 mm Black 427.38x3x5BK EA427.38x3x5BK EA.91 x 1.52 10 mm Black w/ Yellow Borders 427.38x3x5BYL EA.91 x 1.52 10 mm Black w/ Yellow Borders 427.38x3x5BYL EA.91 x 1.52 10 mm Black w/ Yellow Borders 427.38x3x5BYL EA.91 x 1.52 10 mm Black w/ Yellow Borders 427.38x3x5BYL EA.91 x 1.52 10 mm Black w/ Yellow Borders 427.38x3x5BYL EA.61 x 18.29 10 mm Black.61 x 18.29 10 mm Black.61 x 18.29 10 mm Black 427.38x2x60BK RL427.38x2x60BK RL.61 x 18.29 10 mm Black w/ Yellow Borders 427.38x2x60BYL RL.61 x 18.29 10 mm Black w/ Yellow Borders 427.38x2x60BYL RL.61 x 18.29 10 mm Black w/ Yellow Borders 427.38x2x60BYL RL.61 x 18.29 10 mm Black w/ Yellow Borders 427.38x2x60BYL RL.61 x 18.29 10 mm Black w/ Yellow Borders 427.38x2x60BYL RL.91 x 18.29 10 mm Black.91 x 18.29 10 mm Black.91 x 18.29 10 mm Black 427.38x3x60BK RL427.38x3x60BK RL.91 x 18.29 10 mm Black w/ Yellow Borders 427.38x3x60BYL RL.91 x 18.29 10 mm Black w/ Yellow Borders 427.38x3x60BYL RL.91 x 18.29 10 mm Black w/ Yellow Borders 427.38x3x60BYL RL.91 x 18.29 10 mm Black w/ Yellow Borders 427.38x3x60BYL RL.91 x 18.29 10 mm Black w/ Yellow Borders 427.38x3x60BYL RL1.22 x 18.29 10 mm Black1.22 x 18.29 10 mm Black1.22 x 18.29 10 mm Black 427.38x4x60BK RL427.38x4x60BK RL1.22 x 18.29 10 mm Black w/ Yellow Borders 427.38x4x60BYL RL1.22 x 18.29 10 mm Black w/ Yellow Borders 427.38x4x60BYL RL1.22 x 18.29 10 mm Black w/ Yellow Borders 427.38x4x60BYL RL1.22 x 18.29 10 mm Black w/ Yellow Borders 427.38x4x60BYL RL1.22 x 18.29 10 mm Black w/ Yellow Borders 427.38x4x60BYL RL.61 or .91 m widths cut up to 18.29 m are also available in Black (BK) and Black/Yellow (BYL).Black/Yellow (BYL).Black/Yellow (BYL).

Black (BK)

Gray (GY)

SpecificationsSpecificationsSpecifications && TTestingestingestingestingTTestingTTCompoundCompound Blown vinyl spongeBlown vinyl sponge

Edges Safety rounded on stock sizes/rolls. Safety beveled on cut ends

Flammability Flammability DOC FF1-70 Flame Retardant RatingDOC FF1-70 Flame Retardant RatingCoefficient of Friction ASTM F1677: Dry: .60ASTM F1677: Dry: .60Tabor Abrasion Fed Std. 191 Modified: < 2% lost @ 1,000 cyclesFed Std. 191 Modified: < 2% lost @ 1,000 cyclesWarrantyWarranty 1 year1 year

An excellent choice for practical and economical comfort.

Anti-Fatigue

WearResistance

SlipResistance

min. 1 2 3 4 5max.

1313

ERGONOM

IC MATTIN

GERGON

OMIC M

ATTING

Blown vinyl sponge

Ribbed surface

101010 mm

Comm

ercial & Retail

Comm

ercial & Retail

WorkSafe® Light No. 478

» Lightweight.

» High Performance.

» Cutting Fluid Resistant.

An ideal anti-fatigue mat for wet industrial areas, WorkSafe Light has a well-engineered drainage system and molded-in edges provide safe access.

Anti-Fatigue

WearResistance

SlipResistance

min. 1 2 3 4 5max.

Gray (GY)

SpecificationsSpecificationsSpecifications && TTestingestingestingestingTTestingTT

Compound Styrene Butadiene Rubber (A special compound that is resistant to mineral oil based cutting fluid) that is resistant to mineral oil based cutting fluid)

Edges Edges Safety rounded Safety rounded Flammability MVSS 302: “A” RatingCoefficient of Friction ASTM F1677: Dry: > .90 Wet: .36 ASTM F1677: Dry: > .90 Wet: .36 Durometer ASTM D2240: 55 WarrantyWarranty 1 year1 year

CFR Rubber Compound

1313131313 mm

» Quickly drains static electricity from workers, and protects sensitive equipment and products from damage.

» The Nitricell® sponge base is a Nitrile rubber composite that provides exceptional comfort and performance.

» Great for dry heavy-use production and lab areas, the PVC diamond-plate surface resists abrasion and most chemical spills.

ESD Mat No. 786DP

SizeSize Thickness Colour PartThickness Colour PartThickness Colour PartThickness Colour Part NNumberumber UOMUOM.91 x 1.52 m 14 mm Black 786.916x3x5DPBK EA.91 x 1.52 m 14 mm Black 786.916x3x5DPBK EA.91 x 1.52 m 14 mm Black 786.916x3x5DPBK EA.91 x 1.52 m 14 mm Black 786.916x3x5DPBK EA.91 x 1.52 m 14 mm Black 786.916x3x5DPBK EA.91 x 22.86 m 14 mm Black 786.916x3x75DPBK RL.91 x 22.86 m 14 mm Black 786.916x3x75DPBK RL.91 x 22.86 m 14 mm Black 786.916x3x75DPBK RL.91 x 22.86 m 14 mm Black 786.916x3x75DPBK RL.91 x 22.86 m 14 mm Black 786.916x3x75DPBK RL1.22 x 22.86 m 14 mm Black 786.916x4x75DPBK RL1.22 x 22.86 m 14 mm Black 786.916x4x75DPBK RL1.22 x 22.86 m 14 mm Black 786.916x4x75DPBK RL1.22 x 22.86 m 14 mm Black 786.916x4x75DPBK RL1.22 x 22.86 m 14 mm Black 786.916x4x75DPBK RL.91 m widths cut up to 22.86 m are available. .91 m widths cut up to 22.86 m are available. .91 m widths cut up to 22.86 m are available. .91 m widths cut up to 22.86 m are available. .91 m widths cut up to 22.86 m are available.

Diamond-Plate vinyl surface

14 mmmmmm

Nitricell sponge base

SpecificationsSpecificationsSpecifications && TTestingestingestingTTestingTTCompoundCompound Vinyl surface bonded to a Nitricell spongeVinyl surface bonded to a Nitricell spongeEdgesEdges Safety beveledSafety beveledRTT (Resistance Top to Top)RTT (Resistance Top to Top) 1 x 105 to 8 x 106 Ω RTG (Resistance to Ground)RTG (Resistance to Ground) 1 x 105 to 8 x 106 Ω Flammability (surface) per MVSS 302Flammability (surface) per MVSS 302 “A” Rating“A” RatingFlammability (sponge) per MIL-P12420CFlammability (sponge) per MIL-P12420C Burned for < 5 secondsCoefficient of Friction per ASTM F1677Coefficient of Friction per ASTM F1677 Dry: .68Dry: .68Compression Deflection per ASTM D575Compression Deflection per ASTM D575 Deflection @35 psi, mm=8.43Deflection @35 psi, mm=8.43Tabor Abrasion per Fed. Std. 191Tabor Abrasion per Fed. Std. 191 .1 Gram lost @ 1,000 cycles.1 Gram lost @ 1,000 cyclesWarrantyWarranty 3 years3 years

Conductivity

WearResistance

SlipResistance

min. 1 2 3 4 5max.

To be effective, this mat must be grounded. Attach a ground cord to the 10 mm snap located in the lower left corner. Employees must also wear Heel Grounders or conductive shoes.

4.57 m Cord No. 793Heel Grounder No. 793» Use with all ESD mats.

» Solderless terminal.

» Molded-in fastener has an integral 1 megohm resistor.

» Conforms to 10 mm snaps.

» Use with all ESD and Conductive mats.

» Velcro loop for easy attachment.Velcro loop for easy attachment.V

» One size fits all.

REQUIRED ACCESSORIES FOR ESD MATTING

Black (BK)

Pur-Comfort No. 504

Size Thickness PartSize Thickness PartSize Thickness PartSize Thickness Part NNumber Descriptionumber Descriptionumber Descriptionumber Descriptionumber Description UOMUOM.61 x .91 m 16 mm 504.58x2x3BBBL Not Clean Room Ready* EA.61 x .91 m 16 mm 504.58x2x3BBBL Not Clean Room Ready* EA.61 x .91 m 16 mm 504.58x2x3BBBL Not Clean Room Ready* EA.61 x .91 m 16 mm 504.58x2x3BBBL Not Clean Room Ready* EA.61 x .91 m 16 mm 504.58x2x3BBBL Not Clean Room Ready* EA.61 x .91 m 16 mm 504.58x2x3BBBL Not Clean Room Ready* EA.61 x .91 m 16 mm 504.58x2x3BBBL Not Clean Room Ready* EA.61 x .91 m 16 mm 504.58x2x3BBBL Not Clean Room Ready* EA.61 x .91 m 16 mm 504.58x2x3BBBL Not Clean Room Ready* EA.61 x .91 m 16 mm 504.58x2x3BBBL Not Clean Room Ready* EA*Mat is single bagged and topically cleaned.*Mat is single bagged and topically cleaned.*Mat is single bagged and topically cleaned.*Mat is single bagged and topically cleaned.*Mat is single bagged and topically cleaned.

SpecificationsSpecificationsSpecifications && TTestingestingestingTTestingTTCompoundCompound 16 mm thick molded UrethaneEdgesEdges Safety beveledSafety beveledSurface Particulation No base material emissions being generatedNo base material emissions being generatedDynamic HeadspaceDynamic Headspace IEST-RP-CC031.2 A very low level of organicsIEST-RP-CC031.2 A very low level of organicsResistivityResistivity EOS/ESD 7.1 (RTT) and (RTG) = 1 x 10EOS/ESD 7.1 (RTT) and (RTG) = 1 x 107 to 9 x 108 ΩCoefficient of Friction ASTM F1677: Dry: .75ASTM F1677: Dry: .75Tabor Abrasion Fed. Std. 191: < 1% lost @ 1,000 cyclesFed. Std. 191: < 1% lost @ 1,000 cyclesWarrantyWarranty 10 years10 years

» Developed to prevent fatigue in controlled environments, this unique and incredibly comfortable anti-fatigue mat is a 100% premium molded urethane.

» Static dissipative when properly grounded.

» To clean, simply wipe down with a pre-moistened alcohol-based clean room wipe. To clean, simply wipe down with a pre-moistened alcohol-based clean room wipe. TFor use in sterile applications, Pur-Comfort can also be autoclaved (135oC for 20 minutes at 15 psi) or gamma sterilized.

BLue (BL)

For critical environments where static is an issue, Pur-Comfort has an (RTT) and (RTG) rating of 1 x 107 Ω to 9 x 108 Ω . Each mat has one grounding snap.

NOTE: Mat must be grounded with a ground cord; workers must wear Heel Grounder or shoes with conductive soles.

Resistivity

Size Description PartDescription PartDescription PartDescription PartDescription Part NNumber UOMumber UOMumber UOMOne Size Fits All Heel Grounder 793.HGOne Size Fits All Heel Grounder 793.HGOne Size Fits All Heel Grounder 793.HG EA4.57 m 4.57 m Cord 793.15CORD EA4.57 m Cord 793.15CORD EA4.57 m Cord 793.15CORD EA

1414

ERGO

NOM

IC M

ATTI

NG

ERGO

NOM

IC M

ATTI

NG

16 mm

Softer interior Urethane formulation

Dense outer skin with an RTT/RTG rating =1 x 107 to 9 x 108 Ω

ESD

& C

onta

min

atio

n Co

ntro

lES

D &

Con

tam

inat

ion

Cont

rol

SizeSize Thickness Colour PartThickness Colour PartThickness Colour PartThickness Colour Part NNumber UOMumber UOMumber UOM.76 x .91 m 13 mm Terra Cotta 482.12x30x36TC EA.76 x .91 m 13 mm Terra Cotta 482.12x30x36TC EA.76 x .91 m 13 mm Terra Cotta 482.12x30x36TC EA.76 x .91 m 13 mm Terra Cotta 482.12x30x36TC EA.76 x .91 m 13 mm Terra Cotta 482.12x30x36TC EA.76 x 1.52 m 13 mm Terra Cotta 482.12x30x60TC EA.76 x 1.52 m 13 mm Terra Cotta 482.12x30x60TC EA.76 x 1.52 m 13 mm Terra Cotta 482.12x30x60TC EA.76 x 1.52 m 13 mm Terra Cotta 482.12x30x60TC EA.76 x 1.52 m 13 mm Terra Cotta 482.12x30x60TC EA

15

ERGONOM

IC MATTIN

G ERGON

OMIC M

ATTING

Food ProductionFood Production

Grade A®Grade A®Grade A No. 482

» 100% anti-microbial rubber.

» Built in handles for easy cleaning.

» Designed for superior drainage and support.

SpecificationsSpecificationsSpecifications && TTestingestingestingestingTTestingTT

Compound 100% Nitrile Rubber with special anti-microbial additives

Edges Edges Molded safety edgesMolded safety edgesFlammability Flammability MVSS 302: “A” RatingMVSS 302: “A” RatingCoefficient of Friction ASTM F1677: Dry: .78, Wet: .68 ASTM F1677: Dry: .78, Wet: .68 Durometer ASTM D2240: 55

Temperature Range ASTM D1056: -28.89 to 121.11oC and can be autoclaved

WarrantyWarranty 2 years2 years

Designed to withstand fluids and oils including vegetable oils, animal fats, citrus, and fish oil. Textured surface increases traction when greasy and wet. Passes NSF test ASTM G21-96 (2002) for resistance to microorganisms Is permanently anti-microbial and compound additive has GRAS status.

Terra Cotta(TC)(TC)(

Built-in Handles

Hygienic Porthole Design

Substantial UndersideKnobs are 6mm High

Anti-Fatigue

WearResistance

SlipResistance

min. 1 2 3 4 5max.

100%Nitrile Rubber

13 mmmm

PRODUCT QUICk REFERENCE

414 UltraSoft Diamond-Plate414 UltraSoft Diamond-Plate 9 n n n n n n n

415 Diamond-Plate SpongeCote415 Diamond-Plate SpongeCote415 Diamond-Plate SpongeCote415 Diamond-Plate SpongeCote® 9 n n n n n n n

416 Diamond-Plate w/ GritWorks!416 Diamond-Plate w/ GritWorks!® 9 n n n n n n n

420 Tile-Top AM420 Tile-Top AM420 Tile-Top AM420 Tile-Top AM 12 n n n n n n n

427 Soft Step427 Soft Step427 Soft Step427 Soft Step 13 n n n n n

447 WeldSafe447 WeldSafe® 10 n n n n n n

474 WorkRite474 WorkRite 11 n n n n

477 WorkSafe477 WorkSafe® 10 n n n n n n n n n n

478 WorkSafe478 WorkSafe® Light Light 13 n n n n n

482 Grade A482 Grade A®482 Grade A®482 Grade A 15 n n n n n n

495 Diamond-Plate Select495 Diamond-Plate Select 9 n n n n n

497 SMART497 SMART® Diamond Plate 9 n n n n n

502 Rejuvenator502 Rejuvenator502 Rejuvenator502 Rejuvenator® Connect 5 n n n n n n n n

504 Pur-Comfort504 Pur-Comfort 14 n n n n n

540 F.I.T.™ Open540 F.I.T.™ Open540 F.I.T.™ Open540 F.I.T.™ Open 7 n n n n n n n n n n

541 F.I.T.™ Solid541 F.I.T.™ Solid 7 n n n n n n n n n

560 ErgoDeck560 ErgoDeck560 ErgoDeck560 ErgoDeck® Open Open 6 n n n n n n n n n n n

561 ErgoDeck561 ErgoDeck561 ErgoDeck561 ErgoDeck® Open w/ GritWorks! Open w/ GritWorks!® 6 n n n n n n n n n n n

562 ErgoDeck562 ErgoDeck562 ErgoDeck562 ErgoDeck® Solid 6 n n n n n n n n n

563 ErgoDeck563 ErgoDeck563 ErgoDeck563 ErgoDeck® Solid w/ GritWorks!® 6 n n n n n n n n n n n

564 ErgoDeck564 ErgoDeck564 ErgoDeck564 ErgoDeck® SOFT Open SOFT Open 6 n n n n n n n n n n

566 ErgoDeck566 ErgoDeck566 ErgoDeck566 ErgoDeck® SOFT Solid 6 n n n n n n n n n

570 24/Seven570 24/Seven® Solid GR 11 n n n n n n n n n

570 24/Seven570 24/Seven® Solid NBR 11 n n n n n n n n n n

572 24/Seven572 24/Seven® GR 11 n n n n n n n n n

572 24/Seven572 24/Seven® NBR 11 n n n n n n n n n n

574 24/Seven574 24/Seven® Solid w/ GritWorks!® NBR 11 n n n n n n n n n n

576 24/Seven576 24/Seven® w/ GritWorks!® NBR 11 n n n n n n n n n n

580 Autoclavable Mat580 Autoclavable Mat 12 n n n n n n

786 ESD MAT786 ESD MAT 14 n n n n n n n

PRODUCT

Surface Compound Design Custom OtherEnvironment

Page Urethan

eUrethan

e

Dry

Nitrile

Nitrile

Wet

PVC

PVC

Natural

NaturalRRub

ber

ubbe

r

CFR

CFR

RRub

ber

ubbe

r

Optiona

lOptiona

lBBorde

rsorde

rs

Cart

CartFF

riend

lyrie

ndly

Shap

es

Leng

th

w/G

rit

ESD

ESD

Mod

ular

Mod

ular

Width

Drainag

eDrainag

e

Anti-M

icrobial

Anti-M

icrobial

Solid

Solid

Wet/O

ily

EN-A4-092011

ADDITIONAL PRODUCTS FOR COMMON APPLICATIONS

24/SevenCFR

IndustrialWorkSafeWorkSafeW ®orkSafe®orkSafe No. 479

LightWorks InspectionMatNo. 4384384

Food Production

Industrial Commercial & Retail

Entrance

Tuf Sponge

SubStanceNo. 513

UpFront Reversible ScraperNo. 2242242

Sanitizing FootbathMatNo. 2222222CleanRoomMatNo. 0950950The tacky surface effectively pulls and traps dirt and dust off shoe soles. » Easy to use- pull off and discard.

» Use on low-pile carpet, tile or concrete surfaces.

Designed to keep hygienic areas free of debris and germs. » Fill with disinfectant solution to remove

contaminants and germs.

» Pliable rubber scrapers dislodge contaminants.

» Available in 5 L or 25 L capacity.Available in 5 L or 25 L capacity.A

This durable drainage mat has a thick, extra buoyant design for high performance and long-term comfort. The bright safety borders define workstations and a textured surface adds traction. » Cutting Fluid Resistant.

» Bright, molded in safety borders.

» Long-term comfort and value.

» GritWorks!® version increases traction by 40%.

The ultimate combination of comfort and durability in a sponge mat. » A tough vinyl-nitrile (resistant to many A tough vinyl-nitrile (resistant to many A

chemicals and oils) outer layer defends against wear and tear.

» A resilient inner layer of blown vinyl-nitrile A resilient inner layer of blown vinyl-nitrile Asponge provides comfort for standing workers.

» Choose diamond-embossed or pebbled surface pattern.

Designed for applications requiring quality assurance through visual inspection, this mat is ideal for painting and finishing areas. » Flexible vinyl surface and Nitricell® sponge base

provide durability and comfort.

» Reflects and maximizes lighting.

» Enhances quality assurance.

» Abrasion and chemical resistant.

» 100% Silicone-Free.

Effective, low profile design accommodates tight doorways and underside grippers prevent movement. Also available in a “quick-dry”, open slot design to facilitate drainage. » Durable rubber compound resists elements.

» Pliable ridges scrape debris, snow and rain off shoes.

» Easy maintenance.

These rubber 91 x 91cm inter-connecting anti-fatigue mats keep workers productive and comfortable. The hidden interlocking system connects on all four sides to quickly cover large areas. » Use the CFR compound in areas with mineral

oil-based cutting fluids.

» For additional traction use the CFR Gritworks!® Solid No. 574 (CFR) or Drainage No. 576 (CFR).

» Drainage mats allow fluids and debris to flow through freely.

» Solid mats feature an easy to clean surface for use in mostly dry areas.

For use in all dry work areas An excellent choice for practical and economical comfort. » Blown PVC sponge reduces floor hardness up

to 50%.

» Can easily be “custom” cut to fit your work areas.

Contamination Control

Wearwell for EU Countries other thanUK and Irland :Windmolen 227609 NN AlmeloThe NetherlandsTel: +31 (0) 548-659061Email: europe@wearwell.euwww.wearwell.eu

Wearwell UK and IrlandUnit 1, Rycote LaneThame, OxonOX9 2JB, UKTel: 01844 212117Fax: 01844 212128Email: info@wearwell-europe.co.ukwww.wearwell-europe.co.uk

Wearwell USA199 Threet Industrial RoadSmyrna, TN 37167USATel: 800.264.3030Fax: 800.874.4551Email: info@wearwell.comwww.wearwell.com