Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
FACTORY AUTOMATION
Eco Changes from Home to Space
Direct
drive
Significant coil power consumption saving by high-efficiency polarized
electromagnet and direct drive by 24 VDC, 0.1 A rated transistor output
(24 VDC coil)
Models supported for direct drive by transistor output
SD-T type
SD-T12(2.7 kW) SD-T21(4k W)SD-T20(3.7 kW) SD-T32(7.5 kW)
Reduction of Devices Thanks to Direct Drive Technology with Programmable Controller
SD-Q type
SD-Q11(2.5 kW) SD-Q12(2.5 kW)* Capacities shown in ( ) are AC-3 ratings of 200 VAC class.
Nseries
NF32-SV MSO-N12 3-phase Motor
iQ-R / RY41NT2P
UN-SY type module
Tseries
Direct drive achieved by 24 VDC, 0.1 A transistor output Space saving as interface relay not required Terminal cover equipped as standard
NF32-SV MSOD-T12 3-phase Motor
iQ-R / RY41NT2P
Kani Factory, Mitsubishi Electric Corporation Nagoya Works
Small-lot and multi-cycle production by robot assembly cell
The small-lot production of multi-product has been common for all
industries to pursue. However, the mass production of multi-product is
sometimes required depending on the products to be manufactured.
Our Kani factory has added the robot-using production method
besides that of the existing cell-using production for the launch of
our product “MS-T series”. The small-lot/multi-cycle production
required for our magnetic starter has been achieved with the both
cell-using flexible production and robot-using mass production.
L(NA)02040ENG-*(1810)MEE
HEAD OFFICE: TOKYO BLDG., 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
www.MitsubishiElectric.com
S-T Series
Mirror Contacts(With Safety
Separation Function)
Assembly/Transport Solutions
Automobile Manufacturing Solutions
Press Machining Solutions
It is best to employ S-T series/S-N series/SD-Q series models with mirror contacts (safety separation function) in safety inverter/servo circuits for the shutting down of power in the event of an abnormality.With this application, compliance with safety categories 3 and 4 is achieved.
Contactors with Mirror Contacts <Auxiliary Break Contact OFF During Main Contact Welding>
Compliant with TÜV regulations for mirror contacts. Complies with
requirements for "control functionality during failures" stipulated in the
section "Electrical Devices of Industrial Equipment" in EN regulation
EN60204-1 and can be used as an interlocking circuit contact. (Refer
to the catalog of Mitsubishi Electric magnetic contactors and magnetic
starter for the certified models.)
Can be applied to mechanical safety category 4 circuits. (Can detect
malfunction of break contacts)
Features safety contactors and can be used to construct a completely
safe system using a wide assortment of safe parts.
Gap
Auxiliary Break Contact
Main Contact Welding
As the peripheral device for the magnetic
starter, we provide the control and drive
equipment required for building the system
and can propose the risk-free solution with
them.General
Programming Tool"GX Works3"
Safetyprogrammable controller
EmergencyStop Switch
Safety Remote I/O UnitSafety Remote I/O Unit
SafetyMat
Safetyprogrammable controller
LightCurtains
Light Curtain
Light Curtain
Robots
Contactors Breaker
LightCurtains
Robots
Motors GOT
SafetyServo
EnableSwitches
Generalprogrammable controller
Emergency StopSwitch
TeachingPendants
Additional Axes of Robots
Breaker
Breaker
Breaker
Contactors
Contactor
3-phase Motor
STO Signal
STO SignalLaser Scanner
Servo MotorIndicatorLamps
SafetyController
Contactor
Robot CPU
Door Switches
Robot Controllers
Emergency StopSwitch
SafetyServo
SafetyInverter
Emergency StopSwitch
Door Switch
GOT
GOT
GOT