•Reduce Exhaust Harmonics Pre-Cut Ready to Install … Ford Model A Catalog Firewall Insulator Fits under dash against the firewall bulkhead. Roof Kit Roof & Quarter Panels above

Order Line: 888-777-3410Tech Line: 209-942-4777Fax: 209-942-44766507 Pacific Ave. Ste. #334 Stockton, CA 95207

Automotive Thermal Acoustic Insulation

Everything in One Box to Do the Job Right! Pre-Cut, Ready To install Kits are Year, Make and Model Specific and include: •Dynamat Xtreme •Heat Shield Barrier Insulation •Spray Adhesive •Seam Tape •Illustrated Instructions

For more information contact us at: [email protected] ©2003-18 •Prices Subject to Change Without Notice

Roof to Road Solutions to Control Passenger Cabin Noise, Vibration and Heat

•Reduce Road Noise •Reduce Exhaust Harmonics •Eliminate Mechanical Noise •Stop Body Panel Vibration •Reduce Radiated & Reflected Heat •Stop Audio System Vibration

Pre-Cut Ready to Install KitsYear • Make • Model Specific

The Coolest Cars Have QuietRIDE Inside! ™

Cowl Kit Panels between the firewall and front door of the vehicle.

Door Kit All Doors

Trunk Floor Kit Trunk Floor & Tire Well

Body Panel Kit All Panels below the beltline including Package Tray, Seat Divider, Rear Wheel Wells, Fenders, Rear Quarters and Tail Panels

Floor Kit Front Floor, Rear Floor, Transmission Hump/ Driveline

1928-31 Ford Model A Catalog

Firewall Insulator Fits under dash against the firewall bulkhead.

Roof Kit Roof & Quarter Panels above beltline.

Kits are available for these VehiclesSee AcoustiTrunk Catalog

Ford Motor Company Trademarks

are used under license to QuietRide Solutions LLC.




1928-31 Ford Model A

Pre Cut Kits Ready to Install

Roof to Road Solutions to Control Passenger Cabin Noise, Vibration and Heat Introducing a multi-stage, automotive insula-tion and sound damping system to give Model A cars and Trucks the “quiet riding comfort” found in to-day’s new cars. AcoustiSHIELD kits are designed on current “state-of-the-art” auto acoustic technol-ogy, to insulate and control the noise, vibration and heat in the passenger cabin. Kits are pre-cut and come with easy-to-follow installation instructions-----everything you need to do the job right.

Turn Your Model A into “Quiet Riding Comfort” Stage 1 Sound Damper Pads

The first stage consists of pre-trimmed, self-adhesive, Sound Damper Pads, bonded to strategically located trouble spots on the floor pan and roof of the vehicle to control body panel vibra-tion and noise. These spots are mapped and labeled in detailed instructions which are included in the kit.

Kits Include: • Stage 1 Pre-Sized Sound Damper Pads • Stage 2 Pre-Trimmed Heat Absorber / Barrier Panels, Spray Adhesive and Sealing Tape • Complete Illustrated Installation Instruction Dealer program available. For more information contact us at [email protected] ©2003-178Quiet Ride Solutions Prices Subject to Change Without Notice

Stage 2 Heat Absorber/Barrier Panels

The second stage uses a high-tech absorber/barrier material, bonded to the body panels, to both sound deaden and insulate the vehicle from radiant heat penetration from the engine and road. Each absorber panel is cut to the correct shape and con-tour and is mapped and labeled in the detailed instructions.


Inventory# Description Price Inventory# Description Price

©2003-18 Quiet Ride Solutions Prices Subject to Change Without Notice For more information visit: www.quietride.com or contact us at [email protected]

1928-1929 Ford Model A Cars1928-29 Model A Coupe

FORD 2829-CAK 1928-29 Ford Model A Coupe Complete Kit 608FORD 2829-CBPK 1928-29 Ford Model A Coupe Body Panel Insulation Kit 193FORD 2829-CCK 1928-29 Ford Model A Coupe Cowl Insulation Kit 44FORD 2829-CFK 1928-29 Ford Model A Coupe Floor Insulation Kit 134 FORD 2829-CTK 1928-29 Ford Model A Coupe Trunk Insulation Kit 75FORD 2829-CRK 1928-29 Ford Model A Coupe Roof Insulation Kit 134ASU-DDBIK-2 Universal 2 Door Damper/Barrier Insulation Kit 67

1928-29 Model A Tudor SedanFORD 2829-TDAK 1928-29 Ford Model A Tudor Sedan Complete Kit 569FORD 2829-TDBPK 1928-29 Ford Model A Tudor Sedan Body Panel Kit 134FORD 2829-TDCK 1928-29 Ford Model A Tudor Sedan Cowl Insulation Kit 44FORD 2829-TDFK 1928-29 Ford Model A Tudor Sedan Floor Insulation Kit 178FORD 2829-TDRK 1928-29 Ford Model A Tudor Sedan Roof Insulation Kit 178 ASU-DDBIK-2 Universal 2 Door Damper/Barrier Insulation Kit 67

1928-29 Model A Fordor SedanFORD 2829-FDAK 1928-29 Ford Model A Fordor Sedan Complete Kit 629FORD 2829-FDBPK 1928-29 Ford Model A Fordor Sedan Body Panel Kit 134FORD 2829-FDCK 1928-29 Ford Model A Fordor Sedan Cowl Insulation Kit 44FORD 2829-FDFK 1928-29 Ford Model A Fordor Sedan Floor Insulation Kit 178FORD 2829-FDRK 1928-29 Ford Model A Fordor Sedan Roof Insulation Kit 178 ASU-DDBIK-4 Universal 4 Door Damper/Barrier Insulation Kit 131

1928-29 Model A RoadsterFORD 2829-RAK 1928-29 Ford Model A Roadster Complete Kit 417FORD 2829-RBPK 1928-29 Ford Model A Roadster Body Panel Kit 193FORD 2829-RCK 1928-29 Ford Model A Roadster Cowl Insulation Kit 44 FORD 2829-RDK 1928-29 Ford Model A Roadster Door Damper Kit 75FORD 2829-RTK 1928-29 Ford Model A Roadster Trunk Insulation Kit 75FORD 2829-RFK 1928-29 Ford Model A Roadster Floor Insulation Kit 134

1928-29 Model A PhaetonFORD 2829-FDPAK 1928-29 Ford Model A Fordor Phaeton Complete Kit 487FORD 2829-FDPBPK 1928-29 Ford Model A Fordor Phaeton Body Panel Kit 193FORD 2829-FDPCK 1928-29 Ford Model A Fordor Phaeton Cowl Kit 44FORD 2829-FDPDK 1928-29 Ford Model A Fordor Phaeton Door Damper Kit 103FORD 2829-FDPFK 1928-29 Ford Model A Fordor Phaeton Floor Kit 178ASU-DDBIK-4 Universal 4 Door Damper/Barrier Insulation Kit 131

1929 Model A CabrioletFORD 2900-CABAK 1929 Ford Model A Cabriolet Complete Kit 484FORD 2900-CABBPK 1929 Ford Model A Cabriolet Body Panel Kit 193FORD 2900-CABCK 1929 Ford Model A Cabriolet Cowl Insulation Kit 44FORD 2900-CABFK 1929 Ford Model A Cabriolet Floor Insualtion Kit 134FORD 2900-CABTK 1929 Ford Model A Cabriolet Trunk Insualtion Kit 75ASU-DDBIK-2 Universal 2 Door Damper/Barrier Insulation Kit 67

1929 Model A Town SedanFORD 2900-TSAK 1929 Ford Model A Town Sedan Complete Kit 629FORD 2900-TSBPK 1929 Ford Model A Town Sedan Body Panel Kit 134FORD 2900-TSCK 1929 Ford Model A Town Sedan Cowl Insulation Kit 44FORD 2900-TSFK 1929 Ford Model A Town Sedan Floor Insulation Kit 178FORD 2900-TSRK 1929 Ford Model A Town Sedan Roof Insulation kit 178ASU-DDBIK-2 Universal 2 Door Damper/Barrier Insulation Kit 67

1930-1931 Ford Model A Cars1930-31 Model A Coupe

FORD 3031-CAK 1930-31 Ford Model A Coupe Complete Kit 608FORD 3031-CBPK 1930-31 Model A Coupe Body Panel Insulation Kit 193FORD 3031-CCK 1930-31 Ford Model A Coupe Cowl Insulation Kit 44FORD 3031-CFK 1930-31 Ford Model A Coupe Floor Insulation Kit 134FORD 3031-CRK 1930-31 Ford Model A Coupe Roof Insulation Kit 134 FORD 3031-CTK 1930-31 Ford Model A Coupe Trunk Insulation Kit 75ASU-DDBIK-2 Universal 2 Door Damper/Barrier Insulation Kit 67

1930-31 Model A Tudor SedanFORD 3031-TDAK 1930-31 Model A Tudor Sedan Complete Acoustic Kit 569FORD 3031-TDBPK 1930-31 Model A Tudor Sedan Body Panel Kit 134FORD 3031-TDCK 1930-31 Model A Tudor Sedan Cowl Insulation Kit 44FORD 3031-TDFK 1930-31 Model A Tudor Sedan Floor Insulation Kit 178FORD 3031-TDRK 1930-31 Model A Tudor Sedan Roof Insulation Kit 178 ASU-DDBIK-2 Universal 2 Door Damper/Barrier Insulation Kit 67

1930-31 Model A Fordor SedanFORD 3031-FDAK 1930-31 Model A Fordor Sedan Complete Kit 629FORD 3031-FDBPK 1930-31 Model A Fordor Sedan Body Panel Kit 134FORD 3031-FDCK 1930-31 Model A Fordor Sedan Cowl Insulation Kit 44FORD 3031-FDFK 1930-31 Model A Fordor Sedan Floor Insulation Kit 178FORD 3031-FDRK 1930-1931 Model A Fordor Sedan Roof Kit 178 ASU-DDBIK-4 Universal 4 Door Damper/Barrier Insulation Kit 131

1935-2014 Ram/Dodge Truck Catalog



1928-31 Ford Model A Catalog

1930-31 Model A Town SedanFORD 3031-TSAK 1930-31 Model A Town Sedan Complete Kit 629FORD 3031-TSBPK 1930-31 Model A Town Sedan Body Panel Kit 134FORD 3031-TSCK 1930-31 Model A Town Sedan Cowl Insulation Kit 44FORD 3031-TSFK 1930-31 Model A Town Sedan Floor Insulation Kit 178FORD 3031-TSRK 1930-31 Model A Town Sedan Roof Insulation Kit 178ASU-DDBIK-4 Universal 4 Door Damper/Barrier Insulation Kit 131

1930-31 Model A RoadsterFORD 3031-RAK 1930-1931 Model A Roadster Complete Kit 417FORD 3031-RBPK 1930-1931 Model A Roadster Body Panel Kit 193FORD 3031-RCK 1930-1931 Model A Roadster Cowl Insulation Kit 44FORD 3031-RDK 1930-1931 Model A Roadster Door Damper Kit 75FORD 3031-RFK 1930-1931 Model A Roadster Floor Insulation Kit 134FORD 3031-RTK 1930-1931 Model A Roadster Trunk Insulation Kit 75

1930-31 Model A Fordor PhaetonFORD 3031-FDPAK 1930-31 Model A Fordor Phaeton Complete Kit 487FORD 3031-FDPBPK 1930-31 Model A Fordor Phaeton Body Panel Kit 193FORD 3031-FDPCK 1930-31 Model A Fordor Phaeton Cowl Insulation Kit 44FORD 3031-FDPDK 1930-31 Model A Fordor Phaeton Door Damper Kit 103FORD 3031-FDPFK 1930-31 Model A Fordor Phaeton Floor Kit 178

1930-31 Model A VictoriaFORD 3031-VAK 1930-31 Ford Model A Victoria Complete Kit 569FORD 3031-VBPK 1930-31 Ford Model A Victoria Body Panel Kit 134FORD 3031-VCK 1930-31 Ford Model A Victoria Cowl Insulation Kit 44FORD 3031-VFK 1930-31 Ford Model A Victoria Floor Insulation Kit 178 FORD 3031-VRK 1930-31 Ford Model A Victoria Roof Insulation Kit 178ASU-DDBIK-2 Universal 2 Door Damper/Barrier Insulation Kit 67

1930-31 Model A A-400FORD 3031-A4AK 1930-31 Model A A-400 Complete Kit 401FORD 3031-A4BPK 1930-31 Model A A-400 Body Panel Insulation Kit 134FORD 3031-A4CK 1930-31 Model A A-400 Cowl Insulation Kit 44FORD 3031-A4FK 1930-31 Model A A-400 Floor Insulation Kit 178 ASU-DDBIK-2 Universal 2 Door Damper/Barrier Insulation Kit 67

1930-31 Model A CabrioletFORD 3031-CABAK 1930-31 Ford Model A Cabriolet Complete Kit 484FORD 3031-CABBPK 1930-31 Model A Cabriolet Body Panel Insulation Kit 193FORD 3031-CABCK 1930-31 Ford Model A Cabriolet Cowl Insulation Kit 44FORD 3031-CABFK 1930-31 Ford Model A Cabriolet Floor Insulation Kit 134FORD 3031-CABTK 1930-31 Ford Model A Cabriolet Trunk Insulation Kit 75ASU-DDBIK-2 Universal 2 Door Damper/Barrier Insulation Kit 67

1928-1929 Ford Model A Trucks1928-29 Model A Roadster Pickup

FORD 2829-RTAK 1928-29 Ford Model A Roadster Pickup Complete Kit 346FORD 2829-RTCK 1928-29 Ford Model A Roadster Pickup Cowl Kit 44FORD 2829-RTDK 1928-29 Ford Model A Roadster Pickup Door Damper Kit 75FORD 2829-RTFK 1928-29 Ford Model A Roadster Pickup Floor Kit 134FORD 2829-RTRCK 1928-29 Ford Model A Roadster Pickup Rear Cab

Insulation Kit 118

1928-29 Model A and AA Closed Cab TruckFORD 2829-TCCAK 1928-29 Ford Model A Closed Cab Truck Complete Kit 454FORD 2829-TCCCK 1928-29 Ford Model A Closed Cab Truck Cowl Kit 44FORD 2829-TCCFK 1928-29 Ford Model A Closed Cab Truck Floor Kit 134FORD 2829-TCCRCK 1928-29 Ford Model A Closed Cab Truck Rear Cab Kit 103FORD 2829-TCCRK 1928-29 Ford Model A Closed Cab Truck Roof Kit 134ASU-DDBIK-2 Universal 2 Door Damper/Barrier Insulation Kit 67

1928-29 Model A Panel DeliveryFORD 2829-PDAK 1928-29 Ford Model A Panel Delivery Complete Kit 608FORD 2829-PDCK 1928-29 Ford Model A Panel Delivery Cowl Kit 44FORD 2829-PDFK 1928-29 Ford Model A Panel Delivery Front Floor Kit 134FORD 2829-PDRDK 1928-29 Ford Model A Panel Delivery Rear Door Kit 103FORD 2829-PDRFK 1928-29 Ford Model A Panel Delivery Rear Floor Kit 134FORD 2829-PDRK 1928-29 Ford Model A Panel Delivery Roof Kit 163ASU-DDBIK-2 Universal 2 Door Damper/Barrier Insulation Kit 67

1930-1931 Ford Model A Trucks1930-31 Model A Roadster Pickup

FORD 3031-RTAK 1930-1931 Model A Roadster Pickup Complete Kit 346FORD 3031-RTCK 1930-1931 Model A Roadster Pickup Cowl Kit 44FORD 3031-RTDK 1930-1931 Model A Roadster Pickup Door Dampers Kit 75FORD 3031-RTFK 1930-1931 Model A Roadster Pickup Floor Kit 134FORD 3031-RTRCK 1930-31 Model A Roadster Pickup Rear Cab Kit 118

1930-31 Model A and AA Closed Cab TruckFORD 3031-TCCAK 1930-31 Model A Closed Cab Complete Kit 454FORD 3031-TCCCK 1930-31 Model A Closed Cab Cowl Insulation Kit 44FORD 3031-TCCFK 1930-31 Model A Closed Cab Floor Insulation Kit 134FORD 3031-TCCRCK 1930-31 Model A Closed Cab Rear Cab Insulation Kit 103FORD 3031-TCCRK 1930-31 Model A Closed Cab Roof Insulation Kit 134ASU-DDBIK-2 Universal 2 Door Damper/Barrier Insulation Kit 67

1930-31 Model A Panel DeliveryFORD 3031-PDAK 1930-1931 Ford Model A Panel Delivery Complete Kit 608FORD 3031-PDCK 1930-1931 Ford Model A Panel Delivery Cowl Kit 44FORD 3031-PDFK 1930-1931 Ford Model A Panel Delivery Front Floor Kit 134FORD 3031-PDRDK 1930-1931 Ford Model A Panel Delivery Rear Door Kit 103FORD 3031-PDRFK 1930-1931 Ford Model A Panel Delivery Rear Floor Kit 134FORD 3031-PDRK 1930-1931 Ford Model A Panel Delivery Roof Kit 163ASU-DDBIK-2 Universal 2 Door Damper/Barrier Insulation Kit 67


Inventory# Description Price Inventory# Description Price

Ford Model A Pre Cut Kits Ready to Install

Product Application Codes and Price Sheet Inventory# Description Price

Model A Cowl Panels Henry Ford’s first use of the “Chicken Track” texture was on the cowl panels of the Model A Ford in 1930-31. Made with bound door edges. The1928-29 cowl panels are a leather texture. Black ABS and easily painted to match your interior.

Sold in Pairs

Other Parts For Ford Model A VehiclesFORD 2829PH35-CSP 1928-29 Ford Model A Fordor Phaeton (35) Cowl Panel Set 118 FORD 2829R40-CSP 1928-29 Ford Model A Roadster (40)Cowl Panel Set 118

FORD 2829BLB60-CSP 1928-29 Ford Model A Briggs/Leatherback (60) Cowl Side Panels (ABS)

118

FORD 2829FD60-CSP 1928-29 Ford Model A Fordor Sedan (60) Cowl Side Panels 118FORD 2829SW150-CSP 1928-29 Ford Model Station Wagon (150) Cowl Panel Set 118FORD 2829CCT82-TSP 1928-1929 Ford Model A Closed Cab Truck (82) Side Panel Set 118

FORD 2829RP76-TSP 1928-29 Ford Model A Roadster Pickup (76) Cowl Panel Set 118FORD 3100FD160-CSP 1930-31 Ford Model A Fordor Sedan (160) Cowl Side Panels 118FORD 3100-CSP 1930-31 Ford Model A-400 Convertible Sedan Cowl Side Panels 118FORD 3031SW150-CSP 1930-31 Ford Model A Station Wagon (150) Cowl Side Panels 118FORD 3031SW150-CSPP

1930-31 Ford Model A Station Wagon (150) Cowl Side Panels w/Pocket

118

FORD 3031FDTS160-CSP

1930-31 Ford Model A Fordor Town Sedan Cowl Side Panels 118

FORD 3031-V190-CSP 1930-31 Ford Model A Victoria (190) Cowl Side Panels 118FORD 3031-CVSD400-CSP

1930-31 Ford Model A Convertible Sedan (400) Cowl Side Panels

118

FORD 3031-PH35-CSP 1930-31 Ford Model A Phaeton (35) Cowl Side Panels 118FORD 3031-R40-CSP 1930-31 Ford Model A Roadster (40) Cowl Side Panels 118FORD 3031CP45-CSP 1930-1931 Ford Model A Coupe (45-50-54) Cowl Panel Set 118FORD 3031FD160-CSP 1930-31 Ford Model A Fordor Sedan (160) Cowl Side Panels 118FORD 3031FD160-CSPP 1930-31 Ford Model A Fordor Sedan (160) Cowl Side Panels w/

Pocket 118

Ford Model A Jump Seat Cushion Cover and Other PanelsFORD 2829-TDJSB 1928-29 Ford Model A Tudor Jump Seat Cover/Pair 60 FORD 3031-TDJSB 1930-1931 Ford Model A Tudor Sedan Jump Seat Cover 60FORD 3031VASB-P 1930-1931 Ford Victoria Adjustable Passenger Seat Bottom 60FORD 3031VNASB-D 1930-1931 Ford Victoria Non-Adjustable Driver Seat Bottom 60FORD 3031VNASB-P 1930-1931 Ford Victoria Non-Adjustable Passenger Seat Bottom 60

All of our 1928-29 and 1930-31 Ford Model A Floor Kits now include Wood Floor WeatherBarrier Insulation.

If your car is finished, you can insulate the wood floors with one of these Wood Floor Weather Barrier Kits.

Bitchin Firewall Insulator ProductsBIT 2829SBF-CT4 1928-31 Bitchin Ford Car Small Block Firewall (4’ Setback) 239 BIT 3031BBF-CT4 1930-31 Bitchin Ford Car Big Block Firewall (4 1/2’ Setback) 239BIT 3031SBF-CT2 1930-31 Bitchin Ford Car Small Block Firewall (2 1/2’ Setback) 239

Direct Sheetmetal Firewall Insulator ProductsDS 2829SBF-CT4 1928-1929 Direct Sheetmetal Ford Car Small Block Firewall

Insulator (4’ Setback) 239

DS 3031BBF-CT5 1930-1931 Direct Sheetmetal Ford Car Big Block Firewall Insulator (5’ Setback)

239

DS 3031BBF-CT5 1930-1931 Direct Sheetmetal Ford Car Big Block Firewall Insulator (5’ Setback)

239FORD 2829-WFB-FF 1928-1929 Ford Model A Front Wood Floor Barrier Kit 88FORD 2829-WFB-TD 1928-1929 Ford Tudor Sedan FRONT/REAR Wood Floor Barrier Kit 114FORD 3031-WFB-FF 1930-1931 Ford Model A Front Wood Floor Barrier Kit 88FORD 3031-WFB-TD 1930-1931 Ford Tudor Sedan FRONT/REAR Wood Floor Barrier Kit 114

FORD 2829-CT 1928-29 Ford Model A Firewall Insulator 159FORD 3031-CT 1930-1931 Ford Model A Firewall (Early) 159FORD 3100-CT 1931 Ford Model A Firewall Insulator (Late) 159

Model A Ford Firewall Insulators Panels

AcoustiSHIELD Product Description AcoustiShield is a two-stage thermal acoustic automotive insulation product designed to control Noise, Vibration and Heat—the three major issues that affect passenger cabin comfort. Kits include pre-cut, ready-to-install Dynamat Xtreme® damper pads and HeatShield Barrier Insulation panels which are packaged separately for easy installation. Kits come with uniquely illustrated installation sheets, spray adhesive and seam tape.

Complete Acoustic Kits insulate the Cowl, Floor, Roof, Trunk Floor, Doors and Body Panels, which includes the seat divider, package tray and rear wheel wells. The installation of a complete AcoustiShield kit typically will reduce passenger cabin noise by 12 to 17 decibels. To put this in perspective, a 10-decibel reduction is a 50 percent reduction in noise that the human ear can easily detect. Barrier insulation will reduce radiant heat by as much as 25 degrees.


A Roof to Road Solution to Control Passenger Cabin Noise, Vibration and Heat TM

AcoustiShield is a Two-Stage ProcessStage-One of the AcoustiShield process is the application of small pre-cut Dynamat Xtreme® damper pads and strips to auto body sheet metal to greatly reduce the vibration and noise produced by these panels from entering the passenger cabin.

Stage-Two of the AcoustiShield process is the application of pre-cut HeatShield Barrier Insulation panels to the auto body sheet metal to encapsulate any remaining vibration/noise and to thermally insulate the vehicle.

Quick Link

©2003-18 Quiet Ride Solutions LLC. “AcoustiSHIELD”, AcoustiHOOD and “Quiet Ride Solutions” are Registered Trade Marks of Quiet Ride Solutions LLC.

Quiet Ride Solutions is the only source for authentic “Chicken Track Grain”

Found on Early Ford Cars Firewall Insulatorsand other interior panels

1928 through 1948ABS Firewall Cover

Chicken Track Grain MaterialFOMOCO cars and trucks used a unique “chicken track” texture on their firewall insulator covers and related products from 1928 through 1948. Quiet Ride has faithfully reproduced this famous texture and offers it exclusively on its ABS molded firewall insulators and truck headliners, cowl and door panels. Each insulator product is molded with an ABS material and ready-to-install with Heat Shield Thermal Barrier insulation, factory stock accessory holes and mounting pin locations punched.

Ford style steel mounting pins are not included but are available for separate purchase as needed.

Each insulator product is molded from an “out of the car” original firewall for contour and

accuracy.Year-Make-Model Specific.

Firewall Insulators can be ordered without holes for custom applications.



1928-31 Ford Model A Products It was not until 1932 that Ford cars and trucks were deliv-ered with a firewall insulator and many restorers can attest to the fact that the Model A is one “hot” car to drive. Quiet Ride Solutions developed these firewall insulators to fit and look like OEM and then added heatshield insulation to make them even better.

Model A Ford Firewall Insulators Panels

1928-29 1930-31 Late 1931

Turn Your Ford Model A Into Quiet Riding Comfort Pre-Cut, Ready-To-Install Acoustic Insulation Kits

Model A AcoustiSHIELD kits are modeled on stock bodies and are easily modified for street rod applications.CO M P

Cowl Front Floor Rear Floor

Typical Floor and Cowl

Absorber/Barrier Panel Kit

Typical Body Panel Absorber/Barrier

Panel Kit

1930-31 Tudor Sedan Illustrated

Typical Roof Absorber/Barrier Panel Kit

Roof & Body Panels Trunk

Kit Contents:Pre-Trimmed WeatherBarrier Insulation PanelsSpray AdhesiveRoll Aluminum Foil Tape

Tools Needed for Installation:-Sharp Box Knife and Scissors-Felt Tip Marker

The Wood Floor WeatherBarrier kit is designed to insulate and protect the underside of wood floor panels of cars and trucks (allowing the interior face to be “furniture finished.” The barrier seals and prevents the wood from absorbing moisture kicked up from wet road conditions. It also reflects radiant heat from exhaust systems and roadway away from the floor surface.

6507 Pacific Avenue Ste. 334 Stockton, CA 95207Phone: 209-942-4777 FAX: 209-942-4476 E-mail: [email protected] • www.quietride.com©2018 QuietRide Solutions All Rights Reserved

Prerequisites: Installation of any AcoustiShield product begins with preparation of the interior surfaces. All panels must:•Be thoroughly cleaned--adhesive materials will not stick to dusty, dirty, grimy, wood panel surfaces.•Be bone dry.•Be sure that the temperature of metal surface is above 70 degrees.

Surface Preparation:• Old Wood Floors--Clean with TSP and dry. Sand the bottom face of the floor and edges until smooth and clean.

• New Wood Floor--Cut (or purchase) new wood floor to fit in vehicle. Drill all holes required and pre-install to check fit and finish. (Try to maintain a 1/8” gap between the floor edge and the floor support structure.) Then lightly sand all surfaces including edges.

Applying the Wood Floor Barrier Material:Step 1--Lay the wood floor panel on a table, with the “bot-tom side” facing up. Lay out Weather Barrier Material “bottom side up.” Smooth out any wrinkles.

Step 2 --Apply an even coat of spray adhesive to the sur-face of the wood. (Stand back and look across the wood serface to be sure there are no “dry” spots. Do not put spray adhesive on the edges of wood. Apply an even coat of spray adhesive to the surface of the aluminum Weath-erBarrier material.

Roof to Road Solutions to Control Passenmger Cabin Noise, Vibration and Heat

1928-29 and 1930-31Ford Model AWood Floor

WeatherBarrier Insulation KitsFORD 2829-WFB-FF (Front Floor)

FORD 2829-TD-WFB(Tudor Sedan)

FORD 3031-WFB-FF (Front Floor)

FORD 3031-TD-WFB(Tudor Sedan)

Aluminum Seam Tape

WeatherBarrier Aluminum

Spray AdhesiveWood FloorExterior Facing

Road

Interior FacingPassenger Cabin

FLOOR CROSS SECTION VIEWShowing Application Process

1928-291930-31

Car and TruckFront Floor Kits

1928-291930-31

Tudor Sedan Kits

Woo

d Fl

oor W

eath

erBa

rrie

r Pan

els a

re in

clud

ed in

our

Mod

el A

Flo

or k

its.

Kits

are

also

ava

ilabl

e se

para

tely

for r

esto

rers

who

wan

t to

upda

te th

eir

vehi

cle.

Step 5--With your box knife, run the blade around the edges of the wood panel and closely trim all excess WeatherBarrier material away from the edge of the wood. Trim out out battery box,transmission cover and pedal slots, etc

Step 6--Apply the aluminum seam tapearound the edge of the wood floor. (See illustration)

STOP and let both sides dry.

Step 3--Lay Weather-Barrier over the wood floor, lining up the edges.

Step 4--Working from the center to the edges-smooth WeatherBarrier into position

Step 7--Over lap the seam tape over the edge of the wood floor) starting with the WeatherBarrier side. Smooth the seam tape with hand presssure.

WeatherBarrior Side

Interior Floor Side

Floor barrier installation finished and ready for placement in the vehicle.

WeatherBarrier aluminum surface can be painted with a spray enamel

Step 8--Turn the floor board over and fold the seam tape around the edge and seal it along the top surface.

FORD 2828CCT82-TSP1928-29 Ford Closed Cab Truck (82) Cowl Panel Set. Leather Grain.

FORD 2828FD160-CSP1928-29 Ford Fordor Sedan (160)Cowl Panel Set. Leather Grain.

FORD 2828R40-CSP1928-29 Ford Roadster (40) Cowl Panel Set. Leather Grain.

FORD 2828RP76-TSP1928-29 Ford Roadster Pickup (76) Cowl Panel Set. Leather Grain.

FORD 2828SW150-CSP1928-29 Ford Station Wagon (150) Cowl Panel Set. Leather Grain.

FORD 2829-TDJS1928-29 Ford Tudor Sedan Jump Seat Cushion Bottom Panel. Chicken Track Grain.

1928-29 Ford Model A Cowl PanelsFactory Panels were Leather Grain, but Chicken Grain is also available.

FORD 2828BLB60-CSP1928-29 Briggs/Leatherback (60)Cowl Panel Set. Leather Grain.

FORD 2828PH35-CSP1928-29 Ford Phaeton (35) Cowl Panel Set. Leather Grain.

Truck Cowl Panels

Image Coming Soon

Image Coming Soon



FORD 3031SW150-CSPP1930-31 Ford Station Wagon (150) Cowl Panel Set w/ Pocket. Leather Grain.

FORD 3031CP45-CSP1930-31 Ford Coupe (45-50-54) Cowl Panel Set. Leather Grain.


FORD 3031FDTS160-CSP1930-31 Ford Fordor Town Sedan (160) Cowl Panel Set. Leather Grain.

FORD 3031FDTS160-CSPP1930-31 Ford Fordor Town Sedan (160) Cowl Panel Set. w/Pocket. Leather Grain.

FORD 3031V190-CSP1930-31 Ford Victoria (190) Cowl Panel Set. Leather Grain.

FORD 3031CVSD400-CSP1930-31 Ford Convertible Sedan (400) Cowl Panel Set. Leather Grain.


FORD 3031CCT-TSP1930-31 Ford Closed Cab Truck Cowl Panel Set. Leather Grain.

Truck Cowl Panels

FORD 3031FTDS160-CSP1930-31 Ford Fordor Town Sedan (160) Cowl Panel Set. Leather Grain.

FORD 3031PH35-CSP1930-31 Ford Phaeton (35) Cowl Panel Set. Leather Grain.


FORD 3031-VNASB-P1930-31 Ford Victoria Non-Ad-justable Passenger Seat Cushion Bottom Panel. Chicken Track Grain.

Image Coming Soon

Image Coming Soon

Image Coming Soon


FORD 3031-VNASB-D1930-31 Ford Victoria Non-Adjust-able Driver Seat Cushion Bottom Panel. Chicken Track Grain.

FORD 3031-VNASB-P1930-31 Ford Victoria Adjustable Passenger Seat Cushion Bottom Panel. Chicken Track Grain.

FORD 3031-TDJS1930-31 Ford Tudor Sedan Jump Seat Cushion Bottom Panel. Chicken Track Grain.

1928-29 Ford Model A Cars•Model A Coupe•Model A Tudor Sedan•Modle A Fordor Sedan•Model A Roadster•Model A Fordor Phaeton•Model A Cabriolet•Model A Town Sedan

1928-29 Ford Model A Trucks•Model A Roadster Pickup•Model A and AA Closed Cab Truck•Model A Standard Panel Delivery

1928-29 Ford RoadsterComplete AcoustiShield Insulation Kit

FORD 2829-RAK

Cowl Kit Floor Kit

Complete kits include the Door Damper/Barrier Kit

FORD 2829-CTBIT 2829SBF-TDS 2829SBF-T

Firewall Insulator for this Vehicle (Sold Separately)

Street Rod Firewall Insulator Original Ford Firewall Insulator

Trunk Kit

Body Panel Kit

Under Floor Weather Barrier Kit

Door Kit

Products are available separately or as complete kits.

See Catalog for other products available for

this vehicle.


1928-29 Ford CabrioletComplete AcoustiShield Insulation Kit

FORD 2829-CBAK

Cowl Kit Floor Kit





Trunk Kit

Body Panel Kit


Door Kit



this vehicle.


1928-29 Ford CoupeComplete AcoustiShield Insulation Kit

FORD 2829-CAK

Cowl Kit Floor Kit





Trunk Kit

Body Panel Kit


Roof Kit



this vehicle.


1928-29 Ford Fordor (4-D)Complete AcoustiShield Insulation Kit

FORD 2829-FDAK

Cowl Kit Floor Kit





Body Panel Kit

Roof Kit

Includes Under Floor Weather Barrier Kit



this vehicle.


1928-29 Ford Phaeton (4-D)Complete AcoustiShield Insulation Kit

FORD 2829-FDPAK

Cowl Kit Floor Kit





Body Panel Kit

Roof Kit




this vehicle.


1928-29 Ford Town Sedan (4-D)Complete AcoustiShield Insulation Kit

FORD 2829-TSAK

Cowl Kit Floor Kit Roof Kit





Body Panel Kit




this vehicle.


1928-29 Tudor Sedan (2-D)Complete AcoustiShield Insulation Kit

FORD 2829-TDAK






Body Panel Kit




this vehicle.


1928-29 Ford Roadster PickupComplete AcoustiShield Insulation Kit

FORD 2829-RTAK

Cowl Kit Floor Kit




Street Firewall Insulator Original Ford Firewall Insulator

Rear Cab Kit



this vehicle.


1928-29 Ford Closed Cab TruckComplete AcoustiShield Insulation Kit

FORD 2829-CCTAK


Rear Cab Kit







this vehicle.


1928-29 Ford Standard Panel Delivery TruckComplete AcoustiShield Insulation Kit

FORD 2829-PDAK


FORD 2829-CT


BIT 2829SBF-TDS 2829SBF-T





this vehicle.

Body Panel Kit


1930-31 Ford Model A Cars•Model A Coupe•Model A Tudor Sedan•Modle A Fordor Sedan•Model A Town Sedan•Model A Roadster•Model A Fordor Phaeton•Model A Victoria•Model A A-400•Cabriolet

1930-31 Ford Model A Trucks•Model A Roadster Pickup•Model A and AA Closed Cab Truck•Model A Panel Delivery

1930-31 Ford CabrioletComplete AcoustiShield Insulation Kit

FORD 3031-CBAK

Cowl Kit Floor Kit


Trunk Kit

Body Panel Kit



FORD 3031-CT FORD 3100-CTBIT 3031SBF-TDS 3031SBF-T




this vehicle.





1930-31 Ford CoupeComplete AcoustiShield Insulation Kit

FORD 3031-CAK

Cowl Kit Floor Kit

Trunk Kit


Body Panel Kit


Roof Kit



this vehicle.





1930-31 Ford Fordor Sedan (4-D)Complete AcoustiShield Insulation Kit

FORD 3031-FDAK

Cowl Kit Floor Kit


Body Panel Kit


Roof Kit



this vehicle.





1930-31 Ford Phaeton (4-D)Complete AcoustiShield Insulation Kit

FORD 3031-FDPAK

Cowl Kit Floor Kit Complete kits include the Door Damper/Barrier Kit

Body Panel Kit




this vehicle.





1930-31 Ford Tudor (2-D)Complete AcoustiShield Insulation Kit

FORD 3031-TDAK

Cowl Kit Floor Kit


Body Panel Kit


Roof Kit



this vehicle.





1930-31 Ford Town Sedan 4-D) Complete AcoustiShield Insulation Kit

FORD 3031-TSAK

Cowl Kit Floor Kit


Body Panel Kit


Roof Kit



this vehicle.





1930-31 Ford Victoria (2-D)Complete AcoustiShield Insulation Kit

FORD 3031-VAK

Cowl Kit Floor Kit


Body Panel Kit


Roof Kit



this vehicle.





1930-31 Ford Roadster (2-D)Complete AcoustiShield Insulation Kit

FORD 3031-RAK

Cowl Kit Floor Kit

Trunk Kit

Body Panel Kit





this vehicle.





1930-31 Ford A-400 (2-D)Complete AcoustiShield Insulation Kit

FORD 3031-VAK




this vehicle.

Body Panel Kit


Roof Kit

1930-31 Ford Closed Cab TruckComplete AcoustiShield Insulation Kit

FORD 3031-TAK


Rear Cab Kit



FORD 3031-CT FORD 3100-CT


BIT 3031SBF-TDS 3031SBF-T



this vehicle.


1930-31 Ford Roadster PickupComplete AcoustiShield Insulation Kit

FORD 3031-RTAK

Cowl Kit Floor Kit


Rear Cab Kit






this vehicle.


1930-31 Ford Standard Panel Delivery TruckComplete AcoustiShield Insulation Kit

FORD 3031-PDAK








this vehicle.

Body Panel Kit

Rear Door Kit


AcoustiSHIELD Product Description AcoustiShield is a two-stage thermal acoustic automotive insulation product designed to control Noise, Vibration and Heat—the three major issues that affect passenger cabin comfort. Kits include pre-cut, ready-to-install Dynamat Xtreme® damper pads and HeatShield Barrier Insulation panels which are packaged separately for easy installation. Kits come with uniquely illustrated installation sheets, spray adhesive and seam tape.

Complete Acoustic Kits insulate the Cowl, Floor, Roof, Trunk Floor, Doors and Body Panels, which includes the seat divider, package tray and rear wheel wells. The installation of a complete AcoustiShield kit typically will reduce passenger cabin noise by 12 to 17 decibels. To put this in perspective, a 10-decibel reduction is a 50 percent reduction in noise that the human ear can easily detect. Barrier insulation will reduce radiant heat by as much as 25 degrees.


A Roof to Road Solution to Control Passenger Cabin Noise, Vibration and Heat TM

AcoustiShield is a Two-Stage ProcessStage-One of the AcoustiShield process is the application of small pre-cut Dynamat Xtreme® damper pads and strips to auto body sheet metal to greatly reduce the vibration and noise produced by these panels from entering the passenger cabin.

Stage-Two of the AcoustiShield process is the application of pre-cut HeatShield Barrier Insulation panels to the auto body sheet metal to encapsulate any remaining vibration/noise and to thermally insulate the vehicle.

Quick Link

©2003-18 Quiet Ride Solutions LLC. “AcoustiSHIELD”, AcoustiHOOD and “Quiet Ride Solutions” are Registered Trade Marks of Quiet Ride Solutions LLC.

AcoustiShield Photo Gallery

Typical Trunk Floor Sound Dampening and Thermal Barrier Insulation.

Typical Cowl Panel Sound Dampening and Thermal Barrier Insulation.

Expanded NVH Reference Information:Cars and trucks make and/or absorb noise, vibration and heat (NVH) from multiple directions--including internal and external air-borne noise, structure-borne noise as well as radiant heat. NVH factors to consider:

•Engine NVH travels back from the front of the vehicle through the firewall and cowl.

•Wheel well trunk and rear body panel NVH travels forward through the seat divider and package tray panels.

•Roadway radiant heat, often exceeding 140 degrees, rises through vehicle floor pans.

•Rumbling performance exhaust systems and transmission/drive line harmonics also rise through vehicle floor pans.

•Direct heat from the sun penetrates the roof of the vehicle.

All of these influences “Apex” in the middle of the passenger cabin at ear level.

Add the noise produced by the sound system; the air rushing through the vents from the HVAC system; and a normal conversation builds into a “shouting match” between the driver and passenger to overcome the “harmonic drone” of vehicle mechanics.

Typical Body Panel Sound Dampening and Thermal Barrier Insulation.

Typical Floor Panel Sound Dampening and Thermal Barrier Insulation.

Typical Roof Panel Sound Dampening and Thermal Barrier Insulation.



Made Right---Fit Right---Look RightOEM Original Products

Firewall Insulator products are pre-cut and ready to install with standard OEM accessory and mounting holes punched for restoration applications. Each unit has period correct insulation.

Firewall Insulators are also available without holes for aftermarket HVAC systems and Street Rod and Custom installs.

“Ultra High Definition” Vinyl Rubber Street Rod Firewall Insulator

Direct SheetmetalAbsolute Sheetmetal

ABS Leather Grain Material

ABS “Chicken Track” Material

Quick Link

Product Description—ABS “Chicken Track Grain”

Early Ford Original Equipment Firewall Insulators Production Period—FOMOCO: 1928 through 1948 Production Period--Some Early Mopar Vehicles

ABS Firewall CoverChicken Track Grain Material

FOMOCO cars and trucks used a unique “chicken track” texture on their firewall insulator covers and related products from 1928 through 1948. Quiet Ride has faithfully reproduced this famous texture and offers it exclusively on its ABS molded firewall insulators and truck headliners, cowl and door panels. Each insulator product is molded with an ABS material and ready-to-install with Heat Shield Thermal Barrier insulation, factory stock accessory holes and mounting pin locations punched.

Ford style steel mounting pins are not included but are available for separate purchase as needed.






MOPAR, JEEP, DODGE, HEMI, PLYMOUTH, RAM, SRT, CHRYSLER and related logos, vehicle model names and trade

dress are trademarks of Chrysler Group LLC used under license-by QuietRide Solutions LLC. © 2018 Chrysler Group LLC.

Product Description—ABS “Leather Grain”

Original Equipment Firewall Insulators Production Period—GM and MOPAR: 1926 through 1976Production Period—FOMOCO: 1949 through 1979

Most OEMs used a leather grained firewall cover on their cars and trucks from 1926 through 1965. Each insulator product is molded with ABS material and ready-to-install with factory stock accessory holes and mounting pin locations punched.

Kits does not include mounting pins. Quiet Ride has an assortment of “universal” mounting pin styles available as needed.

Mounting pins are not included but are available for separate purchase as needed.

ABS Firewall CoverLeather Grain Material






MOPAR, JEEP, DODGE, HEMI, PLYMOUTH, RAM, SRT, CHRYSLER and related logos, vehicle model names and trade

dress are trademarks of Chrysler Group LLC used under license-by QuietRide Solutions LLC. © 2018 Chrysler Group LLC.

Product Description—“Ultra High Definition Vinyl Rubber“

Original Equipment Firewall Insulators for General Motors Cars and Ford Cars and TrucksProduction Period—GM: 1964 to presentProduction Period—FOMOCO: 1964 to present

FOMOCO and General Motors began using a rubber based firewall material in 1964 with the introduction of the Mustang, Chevelle family and Camaro Cars. Quiet Ride molds these products us-ing a “Ultra High Definition” vinyl rubber. It comes ready to install with a Heat Shield Thermal Barrier insulation pad. Factory stock acces-sory holes and mounting pin loca-tions are punched.

Kits include appropriate period mounting pins.






Product Description—Street Rod Firewall Insulators Direct Sheetmetal Absolute Sheetmetal (formerly Bitchin Products)

Production Period—FOMOCO: 1928 through 1956Production Period--GM: 1936 through 1972Street Rod Firewall Insulators are based on the steel after-market firewalls that are manufactured by Direct Sheetmetal and Absolute Sheetmetal (formerly Bitchin Prod-ucts) to stop the heat and noise gen-erated by large engine installed in smaller, older vehicles. Each insulator product is molded with ABS Leather grain material to fit the steel engine and transmission recess “like a glove.” All street rod products are year, make and model specific, and come ready to install with adouble layer of Heat Shield Thermal Barrier insulation pad.

There are no mounting holes or accessory cut-outs so customers can achieve that “smooth” look in the engine bay and passenger compartment.

Customer must decide method of installation. Quiet Ride makes a Street Rod mounting pin kit, available separately.

Each Street Rod Firewall Insulator product is molded from a steel

mold provided by the manufacturer to achieve contour and accuracy.

Year-Make-Model Specific.

Thermal Insulation TypesOriginal Equipment Firewall Insulators •General Motors Cars and Trucks •Ford Cars and Trucks •MOPAR Cars and Trucks

Heat Shield Barrier InsulationTypically used in vehicles 1928-48 and Vinyl Rubber Firewalls 1964-present

•Street Rods •Custom Firewalls

Black Fiberglass InsulationTypically used in vehicles 1949 through 1977 •ABS Firewall Insulators

Concours Show QualityAuthentically Correct---“Fit like a Glove”---Easy to Install

All QRS Products, Materials and CraftsmanshipMeet or Exceed OEM Quality Standards

No customer has ever reported losing judged points on our firewall products.

Firewall Insulators--A Historical PerspectiveThe Firewall Insulator is the first line of defense against automotive Noise, Vibration and Heat that is generated in the engine bay of the vehicle.

QRS manufactures more than 600 firewall products for antique, classic, custom and street rod cars and trucks. The company has developed these products based on “out of car” original in-sulator pads that have been supplied by its customers. QuietRide Firewalls Insulators are exact reproductions of OEM products.

Most firewall insulators made between 1928 and the mid-1960s were constructed with an oil impregnated cardboard cover in combination with a number of insulation materials. In 1964 General Motors and Ford Motor Company began using a “spray-on” rubber material bonded to a thin layer of “shody” insulation.

All of the company’s firewall products are vacuum form molded to fit the firewall and transmis-sion contours exactly. They are digitized and manufactured on its Flow Water Jet Cutting System for accurate fitting. Each firewall cover is backed with period correct insulation which could include a black fiberglass or HeatShield barrier insulation.

Firewall Colors and “Sheen”Just a word about the “look” of your old firewall in comparison to a new one--you may may note that the new firewall does not look the same as your original--because of the “sheen.” The firewall insulator in a car built in the 1930s or 40s is now at least 70-80 years old and is dirty and dingy. When the vehicle came off the assembly line, all of its component parts were crisp, clean and sparkling fresh.

With few exceptions, firewall insulators were black when they came from the factory. There were some exceptions in the General Motors product line from 1933 through 1941 in which the firewall insulators were a “mocha brown” color. The firewall color would typically match the color of your clutch, brake and accelerator pedal rubber pads.

6507 Pacific Avenue--Ste 334 Stockton, CA 95207Order Line: 888-777-3410Tech Line (209) 942-4777Fax (209) 942-4476www.quietride.com

©2003-18 Quiet Ride Solutions LLC. “AcoustiSHIELD” and “Quiet Ride Solutions” are Registered Trade Marks of Quiet Ride Solutions LLC.


American Cars and Trucks used a wide variety of mounting pins, clips, buttons and screws to attach the firewall insu-lator to the interior of the steel firewall bulkhead. Clean up and reuse your original mounting pins if you have them. We offer the following mounting pins and information based on what we have been able to find available.

FORD 3541-MPL

Early Ford Firewall Mounting Pins--LongThese all steel firewall mounting pins are an exact reproduction of the originals. They are in a 3/4 inch in length. The Long pin works best in the 1935-41 cars and may be used on cars through the mid-fiftys.

3

FORD 3541-MPS

Early Ford Firewall Mounting Pin--ShortThese all steel firewall mounting pins are an exact reproduction of the originals. They are in a 1/2 inch in length. The short pins work best for the 1942-48 Ford cars and 1940-47 Ford trucks and may be used on trucks through the mid-fiftys.

3

GM 5500-MP GM Firewall Plastic Firewall Mounting Plugs General Motors started using a plastic firewall mounting plug to attach the insulator to the steel firewall bulkhead in 1955 for trucks and 1957 for cars. These plugs are still used in many GM vehicles today.

3

FORD RB-MP Late Model Ford Firewall Mounting Pins--Rubber Bullet Style These all Rubber Bullet Style Ford mounting pins were used on FOMOCO products starting in 1969. These are an exact reproduction of the original.

3

SRMP-9 Street Rod Mounting Pin Kit With this new mounting pin kit, you can smooth your firewall by welding closed the firewall mounting holes and install any of our insulator panels for that “smoothie look.” This kit will give you the option to place the firewall mounting pins where they will fit your application best. Be sure to order your firewall insulator “No Holes” when you place your order. Kit Includes 9 pinsets and instructions.

34

UMPS-10 Universal Mounting Pins If your original firewall mounting pins are missing or damaged beyond repair, these universal pins may be a solution. They are a plastic “Christmas tree” type pin with a 1/2” button “head” that will fit most 5/16 inch holes. Kit includes 10 pins.

20

UWC-MPL-10 Universal Wire Cap Mounting Pin--Long A variety of car and truck manufacturers in the 1930s-40s-50s used a wire cap retainer to mount the firewall insulator. Long shank (1/2 inch) with a 1/2 inch button “head” that can be painted to match the firewall color. Kit includes 10 Pins.

10

UWC-MPS-10 Universal Wire Cap Mounting Pin--Short A variety of car and truck manufacturers in the 1930s-40s-50s used a wire cap retainer to mount the firewall insulator. Short shank (1/4 inch) with a 1/2 inch button “head” that can be painted to match the firewall color. Kit includes 10 Pins.

10

UPPS-20 Universal Upholstery Panel Pin Set If your original upholstery panel mounting pins are missing or damaged beyond repair, these universal pins may be a solution. They are a short-shank plastic “Christmas tree” type pin with a 1/2 inch “head” that will fit 5/16 inch holes. Kit includes 10 pins.

30

R-07-01 Ford Original Shoulder Bolts for mid-to-late 1932 through 1935 Cars/Trucks Ford special slotted truss head shoulder screw, painted in Ford S-2 finish. Period correct insulator panel to dash Truss head/Shoulder mounting bolts for mid-to-late 1932-35 car, wagon and sedan delivery. Per Ford Engineering release documents. Kit includes one Shoulder screw, 1/4 lock and 1/4-20 hex nut. FYI: 12 required for 1932 Vehicles and 14 required for 1933-35 vehicles. Please Order directly from Roy Nacewicz Enterprises, www.fordbolts.com.

5.95

R-83-56 Early and Mid-Year 1932 Ford Correct insulator panel to dash mounting screws for early and mid-year 1932 passenger car, wagon and sedan delivery. Per Ford Engineering release docu-ments, the correct slotted flat head screws (1/4-20 x 1 3/16), locks, hex nuts and cup washers. Finished in black oxide. Kit includes 12 Sets (48 pieces.)Please Order directly from Roy Nacewicz Enterprises, www.fordbolts.com.

14.95

Mounting Pinsand Clips

Documents

•Reduce Exhaust Harmonics Pre-Cut Ready to Install … Ford Model A Catalog Firewall Insulator Fits under dash against the firewall bulkhead. Roof Kit Roof & Quarter Panels above