Upload
hoangthu
View
223
Download
0
Embed Size (px)
Citation preview
1Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/Specificationssubject to change
FCN-365JFCN-365P
FCN-364P
FCN-364J
FCN-365J FCN-364P
FCN-364J
FCN-364P
FCN-364J
FCN-365P
FCN-362J
FCN-363J
FCN-361P
FCN-364P
FCN-364P
FCN-364J
FCN-365P
FCN-365P
FCN-365J
FCN-365P
FCN-367J
With type E cover
With type B cover
With type J1 cover
RECTANGULAR CONNECTORS
FCN360 Series
Terms in Selection Table (Example)
4-2
Contact pitchDenotes a pitch between adjacent contacts or pitch between rows.2.54 mm (0.100 in.) (pitch between adjacent contacts) x 2.54 mm (0.100 in.) (pitch between rows)
Number of contactsDenotes the numbers of contacts of available connectors.
Connection typeDenotes the connection type of the cable or PC board connection section.
PlatingDenotes the contact plating specification.
Specifications
Operating temperature rangeThe connector can be used within the specified temperature range.
Current ratingMaximum current that can flow through one connector pin
Voltage ratingMaximum voltage that can be applied to a connector
Contact resistanceResistance observed at the contact part when 0.3 A (or 0.1 A) flows at 6 VDC with the connectors mated
Insulation resistanceResistance to the leakage current flowing through the insulator (inside or surface of the insulator) when 500 VDC is applied across adjacent pins of a connector
Dielectric withstanding voltageApplying the indicated voltage across adjacent pins of a connector for one minute does not cause any abnormality (damage or cracks in insulator).
Insulating material, cleaning with chlorotheneDenotes the insulating material used, and indicates whether the insulating material can be cleaned with chlorothene.
Part numberSome part numbers are indicated as examples.
Model 700 series
Appearance
Stru
ctur
e
Contact pitch
Number of contacts
Pin
type
Solder eyelet (tail shape)
Wire-wrapping (post cross section)
Crimping (applicable AWG No.)
Straight, throughhole (PC board hole dimensions)
Right-angle, throughhole (PC board hole dimensions)
IDC (applicable AWG No.)
#28, Flat cable
Plating
Gold
Silver
Tin
Spe
cific
atio
n
Operating temperature range
Current rating
Voltage rating
Contact resistance20 mΩ max.
Insulation resistance (DC 500 V) 1,000MΩ min.
Dielectric withstanding voltage (for 1 minute)
Insulation material cleaning with Chlorothene
Polyester cleaning possible
Part number (example)
Remarks EMI protection cover provided
2.54 × 2.54
10, 14, 16, 20, 26, 30,34, 40, 50, 60
PJ
0.64
φ 0.8, 2.54 × 2.54
PJPJ
φ 0.8, 2.54 × 2.54
#28, Flat cable
–55°C to +105°C
DC 1 A
AC 250 V
(DC 6 V, 0.1 A)
AC 500 V
FCN-705P050-AU/MFCN-707J050-AU/B
Selection Table
4-3
4
Model
Appearance
Stru
ctur
e
Contact pitch
Number of contacts
Pin
type
Solder eyelet (tail shape)
Wire-wrapping (post cross section)
Crimping ( applicableAWG No.)
Straight, through hole (PC board hole dimensions)
Right-angle, through hole (PC board hole dimensions)
IDC ( applicableAWG No.)
Plating
Gold
Silver
Tin
Spe
cific
atio
n
Operating temperature range
Current rating
Voltage rating
Contact resistance
Insulation resistance (DC 500 V)
Dielectric withstanding voltage (for 1 minute)
Insulating material
Part number (example)
Remarks
Rectanglar Connectors
15 mΩ max.
1,000 MΩ min.
PolyesterPC (363J)
2.54 × 2.54
–55°C to +85°C
DC 3 A (IDC type: 1A)
AC 250 V
(DC 6 V, 0.3 A)
AC 500 V
FCN-361P024-AU
8, 16, 24, 32, 40, 48, 56, 64
PJ
φ1, 2.54 × 2.54
360 series
PJ
PJ #28, Flat cable
Cable cover provided
PJ
1.8 × 0.7
1.8 × 0.7
Diagonal 0.71 mm(0.028 in.)
PJ AWG #22 to #28
φ1, 2.54 × 2.54
φ1, 2.54 × 2.54
φ1, 2.54 × 2.54
FCN-360 Series
4Dimensions are in millimeters (inches) www.fujitsu.takamisawa.comSpecificationssubject to change
NOTES
5Dimensions are in millimeters (inches) www.fujitsu.takamisawa.comSpecificationssubject to change
FEATURES
• Many applicationsVarious connectors are available for connection bymeans of soldering, wire wrapping, crimping, PC boardmounting, and insulation displacement connection(IDC). The user can choose a plug and jackcombination that best meet each application.
• Small size for high-density mountingThe connectors are small with a contact and terminalpitch of 2.54 mm (0.100 in.) between pins and betweenrows and are thus well suited for high-density mounting.
• Sturdy shell guideSturdy shell guides are used to prevent mismating andto protect the pins.
• Excellent cost performanceStreamlined design and automated manufacturing,including use of partial solder plating, provide excellentcost performance.
SPECIFICATIONS MATERIALS
RECTANGULAR CONNECTORS
FCN-360 SERIES
Item
Operating temperature range
Current Rating
Voltage Rating
Contact resistance
Insulation resistance
Dielectric withstanding voltage
Insertion force
Withdrawal force
Applicablewire
Applicable PC board
Specification
–55°C to +85°C
DC 3 A (IDC type: 1 A)
AC 250 V
15 mΩ max. (DC 6 V, 0.3 A)
1000 MΩ min. (DC 500 V)
AC 500 V for 1 minute
2.5 kg max. (8 contacts), 20 kg max. (64 contacts)
0.3 kg min. (8 contacts), 2.3 kg min. (64 contacts)
φ0.60 mm (0.024 in.) max, AWG #23 or less
φ0.32 mm (0.013 in.) to φ0.26 mm (0.010 in.), AWG #28 to #30
Standard contacts φ0.51 mm (0.020 in.) to φ0.32 mm (0.013in.), AWG #24 to #28, insulator φ1.2 mm (0.047 in.) max.Contacts for thick wires φ0.64 mm (0.025 in.) to φ0.32 mm(0.013 in.), AWG #22 to #28, insulator φ1.7 (0.067 in.) max.
Flat cable 1.27 mm (0.050 in.) pitch, AWG #28 (stranded wire),AWG #30 (solid wire)
1.6 mm (0.063 in.) standard thick
Soldering
Wire-wrapping
Crimping
IDC
Item
Insulator
Conductor
Plating
Material
Polyester (363J: PC94V-2)
Copper alloy
Gold plating, silver plating
FCN-360 Series
6Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/Specificationssubject to change
PART NUMBERFCN-36 7 J 048-AU / H
(Only for IDC)Shape of connector cover with IDC holders
B: Close end (special)F: Close endH: Through end
Plating and cover specificationAU: Gold platingB: Type B cover (standard)C: Type C cover (for cable-to-cable connection)D: Type D cover (with metal cable clamp)E: Type E cover (with long lock-screws)F: Type F cover (64 contacts only)G1: One-touch lock type (40 contacts only)H/E: EMI protection type (40 contacts only)J1: Obtuse angle cable-out cover (40 contacts only)
Number of contacts8, 16, 24, 32, 40, 48, 56, 64
Connector or parts typeA: Metal fittingC: CoverJ: JackP: Plug
Tail type0: Cover, metal fitting1: Soldering2: Wire-wrapping3: Crimping4: Straight5: Right-angle7: IDC
360 series connector
Fujitsu connector
FCN-360 Series
7Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/Specificationssubject to change
APPLICATION EXAMPLE
FCN-365JFCN-365P
FCN-364P
FCN-364J
FCN-365J FCN-364P
FCN-364J
FCN-364P
FCN-364J
FCN-365P
FCN-362J
FCN-363J
FCN-361P
FCN-364P
FCN-364P
FCN-364J
FCN-365P
FCN-365P
FCN-365J
FCN-365P
FCN-367J
With type E cover
With type B cover
With type J1 cover
FCN-365P
FCN-365J
With type G1 cover
With type H/E coverWith type E cover
With type Ccover
FCN-360 Series
8Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/Specificationssubject to change
SOLDERING TYPE (PLUG) DIMENSIONS
Unit: mm (in.)
MOUTING HOLE LAYOUT
[Panel]
Unit: mm (in.)
PART NUMBERS AND DIMENSIONSNumber ofcontacts
8
16
24
32
40
48
56
64
Part number
FCN-361P008-AU
FCN-361P016-AU
FCN-361P024-AU
FCN-361P032-AU
FCN-361P040-AU
FCN-361P048-AU
FCN-361P056-AU
FCN-361P064-AU
Dimensions: mm (in.)A
28.84 (1.135)
39.0 (1.535)
49.16 (1.935)
59.32 (2.335)
69.48 (2.735)
79.64 (3.135)
89.8 (3.535)
99.96 (3.935)
B
23.34 (0.918)
33.5 (1.318)
43.66 (1.718)
53.82 (2.118)
63.98 (2.518)
74.14 (2.918)
84.3 (3.318)
94.46 (3.718)
C
17.84 (0.702)
28.0 (1.102)
38.16 (1.502)
48.32 (1.902)
58.48 (2.302)
68.64 (2.702)
78.8 (3.102)
88.96 (3.502)
D
7.62 (0.3)
17.78 (0.7)
27.94 (1.1)
38.1 (1.5)
48.26 (1.9)
58.42 (2.3)
68.58 (2.7)
78.74 (3.1)
D
B
A
6 (0
.236
)
2.54
(0.
10)
8.25
(0.
324)
2.54 (0.10)
5.8
(0.2
28)
12.1
(0.
476)
5 (0
.196
)
4 (0
.157
)
0.7 (0.027)
1.5 (0.059)
Cφ2.8 (0.110)
AB
1 2
±0.3
±0.15 (0.005)
8.6(
0.33
8)±
0.2(
0.00
7)
φ2.8(0.110) +0.15(0.005)–0 hole
(C + 1)
B
±0.011((C + 0.039) )
FCN-360 Series
9Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/Specificationssubject to change
SOLDERING TYPE (JACK) DIMENSIONS
Unit: mm (in.)
BOARD MOUTING HOLE LAYOUT
[Panel]
Unit: mm (in.)
PART NUMBERS AND DIMENSIONSNumber ofcontacts
8
16
24
32
40
48
56
64
Part number
FCN-361J008-AU
FCN-361J016-AU
FCN-361J024-AU
FCN-361J032-AU
FCN-361J040-AU
FCN-361J048-AU
FCN-361J056-AU
FCN-361J064-AU
Dimensions: mm (in.)A
28.84 (1.135)
39.0 (1.535)
49.16 (1.935)
59.32 (2.335)
69.48 (2.735)
79.64 (3.135)
89.8 (3.535)
99.96 (3.935)
B
23.34 (0.918)
33.5 (1.318)
43.66 (1.718)
53.82 (2.118)
63.98 (2.518)
74.14 (2.918)
84.3 (3.318)
94.46 (3.718)
C
17.84 (0.702)
28.0 (1.102)
38.16 (1.502)
48.32 (1.902)
58.48 (2.302)
68.64 (2.702)
78.8 (3.102)
88.96 (3.502)
D
7.62 (0.3)
17.78 (0.7)
27.94 (1.1)
38.1 (1.5)
48.26 (1.9)
58.42 (2.3)
68.58 (2.7)
78.74 (3.1)
D
B
A
2.54
(0.
10)
8.25
(0.
324)
2.54 (0.10)
5.8
(0.2
28)
10.8
(0.
425)
5 (0
.198
)
4 (0
.157
)
0.7 (0.027)
1.5 (0.059)
Cφ2.8 (0.110)
A
B
0.5 (0.019)
6 (0.236)
6 (0
.236
)
1
±0.3
±0.15 (0.005)
8.6
(0.3
38)±
0.2(
0.00
7)
φ2.8 (0.110) +0.15(0.005)–0 hole
(C + 1)
B
±0.011((C + 0.039) )
FCN-360 Series
10Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/Specificationssubject to change
WIRE-WRAP TYPE (PLUG) DIMENSIONS
Unit: mm (in.)
MOUTING HOLE LAYOUT
Unit: mm (in.)
PART NUMBERS AND DIMENSIONSNumber ofcontacts
8
16
24
32
40
48
56
64
Part number
FCN-362P008-AU
FCN-362P016-AU
FCN-362P024-AU
FCN-362P032-AU
FCN-362P040-AU
FCN-362P048-AU
FCN-362P056-AU
FCN-362P064-AU
Dimensions: mm (in.)A
28.84 (1.135)
39.0 (1.535)
49.16 (1.935)
59.32 (2.335)
69.48 (2.735)
79.64 (3.135)
89.8 (3.535)
99.96 (3.935)
B
23.34 (0.918)
33.5 (1.318)
43.66 (1.718)
53.82 (2.118)
63.98 (2.518)
74.14 (2.918)
84.3 (3.318)
94.46 (3.718)
C
17.84 (0.702)
28.0 (1.102)
38.16 (1.502)
48.32 (1.902)
58.48 (2.302)
68.64 (2.702)
78.8 (3.102)
88.96 (3.502)
D
7.62 (0.3)
17.78 (0.7)
27.94 (1.1)
38.1 (1.5)
48.26 (1.9)
58.42 (2.3)
68.58 (2.7)
78.74 (3.1)
D
B
A
2.54
(0.
10)
8.25
(0.
324)
2.54 (0.10)
4 (0
.157
)
10.3
(0.
405)
10.8
(0.
425)
Cφ2.8 (0.110)
AB
0.71 (0.027)
Diagonal length
[Board] [Panel]
D ±0.2 (0.007)
±0.15 (0.005)
2.54
(0.
10)±
0.15
(0.0
09)
φ2.8 (0.110)+0.15(0.005)–0 hole
Bφ1 (0.039)+0.1(0.0034) hole
±0.3
±0.15 (0.005)
8.6
(0.3
38)±
0.2(
0.00
7)
φ2.8 (0.110)+0.15(0.005)–0 hole
(C + 1)
B
±0.011((C + 0.039) )
FCN-360 Series
11Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/Specificationssubject to change
WIRE-WRAP TYPE (JACK) DIMENSIONS
Unit: mm (in.)
MOUTING HOLE LAYOUT
Unit: mm (in.)
PART NUMBERS AND DIMENSIONSNumber ofcontacts
8
16
24
32
40
48
56
64
Part number
FCN-362J008-AU
FCN-362J016-AU
FCN-362J024-AU
FCN-362J032-AU
FCN-362J040-AU
FCN-362J048-AU
FCN-362J056-AU
FCN-362J064-AU
Dimensions: mm (in.)A
28.84 (1.135)
39.0 (1.535)
49.16 (1.935)
59.32 (2.335)
69.48 (2.735)
79.64 (3.135)
89.8 (3.535)
99.96 (3.935)
B
23.34 (0.918)
33.5 (1.318)
43.66 (1.718)
53.82 (2.118)
63.98 (2.518)
74.14 (2.918)
84.3 (3.318)
94.46 (3.718)
C
17.84 (0.702)
28.0 (1.102)
38.16 (1.502)
48.32 (1.902)
58.48 (2.302)
68.64 (2.702)
78.8 (3.102)
88.96 (3.502)
D
7.62 (0.3)
17.78 (0.7)
27.94 (1.1)
38.1 (1.5)
48.26 (1.9)
58.42 (2.3)
68.58 (2.7)
78.74 (3.1)
D
B
A
2.54
(0.
10)
8.25
(0.
324)
2.54 (0.10)
5.8
(2.2
83)
10.8
(0.
425)
13.5
(0.
531)
4 (0
.157
)
6 (0.236)
6 (0
.236
)
Cφ2.8 (0.110)
AB
1
0.71 (0.027)
Diagonal length
[Board] [Panel]
D ±0.2 (0.007)
±0.15 (0.005)
2.54
(0.
10)±
0.15
(0.0
09)
φ2.8 (0.110) +0.15(0.005)–0 hole
Bφ1 (0.039)+0.1(0.0034) hole
±0.3
±0.15 (0.005)
8.6
(0.3
38)±
0.2(
0.00
7)
φ2.8 (0.110) +0.15(0.005)–0 hole
(C + 1)
B
±0.011((C + 0.039) )
FCN-360 Series
12Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/Specificationssubject to change
CRIMP TYPE (JACK HOUSING) DIMENSIONS
Unit: mm (in.)
MOUTING HOLE LAYOUT
[Panel]
Unit: mm (in.)
PART NUMBERS AND DIMENSIONSNumber ofcontacts
816243240485664
Part number
FCN-363J008FCN-363J016FCN-363J024FCN-363J032FCN-363J040FCN-363J048FCN-363J056FCN-363J064
Dimensions: mm (in.)
D
B
A
2.54
(0.
10)
8.25
(0.
324)
2.54 (0.10)
10.8
(0.
425)
4 (0
.157
)
6 (0.236)
6 (0
.236
)
φ2.8 (0.110)
22 (
0.86
6)
C
5.8
(2.2
83)
6 (0.236)
Pin 1 in row A
Pin 1 in row B
B23.34 (0.918)33.5 (1.318)43.66 (1.718)53.82 (2.118)63.98 (2.518)74.14 (2.918)84.3 (3.318)94.46 (3.718)
C17.84 (0.702)28.0 (1.102)38.16 (1.502)48.32 (1.902)58.48 (2.302)68.64 (2.702)78.8 (3.102)88.96 (3.502)
D7.62 (0.3)
17.78 (0.7)27.94 (1.1)38.1 (1.5)
48.26 (1.9)58.42 (2.3)68.58 (2.7)78.74 (3.1)
A28.84 (1.135)39.0 (1.535)49.16 (1.935)59.32 (2.335)69.48 (2.735)79.64 (3.135)89.8 (3.535)99.96 (3.935)
±0.3
±0.15 (0.005)
8.6
(0.3
38)±0
.2(0
.007
)
φ2.8 (0.110) +0.15(0.005)–0 hole
(C + 1)
B
±0.011((C + 0.039) )
FCN-360 Series
13Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/Specificationssubject to change
Contact type
FCN-363J-AU(Loose piece)
FCN-363J-AU/R(Strip reeled)
FCN-363J-AU/S(Loose piece)
FCN-363J-AU/T(Strip reeled)
CRIMP TYPE (CONTACT) DIMENSIONS
Standard contact (applicable wire: AWG #24 to
#28)
Thick wire connection contact (applicable wire:
AWG #22 to #26)
20.05 (0.789) 20.05 (0.789)
Unit: mm (in.)
PART NUMBERS
Type
Loose piece
Strip reeled
Plating
Gold plating
Gold plating
Standard
FCN-363J-AU
FCN-363J-AU/R
Thick wire connection contact
FCN-363J-AU/S
FCN-363J-AU/T
PART NUMBERS OF CRIMPING TOOLS
Part number
FCN-363T-T005/H(Hand crimping tool)
FCN-363T-T011/H(Hand crimping tool)
[Hand crimping tool] [Contact withdrawal tool]
10 (
0.39
3) 65 (2.559)
FCN-360T-T001/H
Wire cross-sectionarea (mm 2)
0.20 to 0.24
0.13 to 0.16
0.088 to 0.096
0.30 to 0.40
0.20 to 0.24
0.13 to 0.16
Applicablewire
AWG #24
AWG #26
AWG #28
AWG #22
AWG #24
AWG #26
Crimp height Insulatordiameter
φ1.2 mm(0.047 in.) max
φ1.2 mm(0.047 in.) max
φ1.2 mm(0.047 in.) max
1.25 mm (0.049 in.) to1.30 mm (0.051 in.)
1.20 mm (0.047 in.) to1.25 mm (0.049 in.)
1.15 mm (0.045 in.) to1.20 mm (0.047 in.)
Strippedlength
3.0 mm (0.118 in.) to4.0 mm (0.157 in.)
3.0 mm (0.118 in.) to4.0 mm (0.157 in.)
3.0 mm (0.118 in.) to4.0 mm (0.157 in.)
3.0 mm (0.118 in.) to4.0 mm (0.157 in.)
3.0 mm (0.118 in.) to4.0 mm (0.157 in.)
3.0 mm (0.118 in.) to4.0 mm (0.157 in.)
0.85 mm (0.033 in.) to0.95 mm (0.037 in.)
0.75 mm (0.029 in.) to0.85 mm (0.033 in.)
0.73 mm (0.028 in.) to0.81 mm (0.031 in.)
φ0.9 mm (0.035 in.)1.8 mm (0.071 in.)
φ0.9 mm (0.035 in.)1.8 mm (0.071 in.)
φ0.9 mm (0.035 in.)1.8 mm (0.071 in.)
FCN-360 Series
14Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/Specificationssubject to change
STRAIGHT TYPE (PLUG) DIMENSIONS
Unit: mm (in.)
BOARD MOUTING HOLE LAYOUT
Unit: mm (in.)
D
B
A
C
8.25
(0.
324)
2.54
(0.
10)
4.2
(0.1
65)
10.3
(0.
405)
4 (0
.157
)
0.71 (0.027)
φ2.8 (0.110)
2.54 (0.10)
Diagonal length
BA
1
PART NUMBERS AND DIMENSIONSNumber ofcontacts
8
16
24
32
40
48
56
64
Part number
FCN-364P008-AU
FCN-364P016-AU
FCN-364P024-AU
FCN-364P032-AU
FCN-364P040-AU
FCN-364P048-AU
FCN-364P056-AU
FCN-364P064-AU
Dimensions: mm (in.)A
28.84 (1.135)
39.0 (1.535)
49.16 (1.935)
59.32 (2.335)
69.48 (2.735)
79.64 (3.135)
89.8 (3.535)
99.96 (3.935)
B
23.34 (0.918)
33.5 (1.318)
43.66 (1.718)
53.82 (2.118)
63.98 (2.518)
74.14 (2.918)
84.3 (3.318)
94.46 (3.718)
C
17.84 (0.702)
28.0 (1.102)
38.16 (1.502)
48.32 (1.902)
58.48 (2.302)
68.64 (2.702)
78.8 (3.102)
88.96 (3.502)
D
7.62 (0.3)
17.78 (0.7)
27.94 (1.1)
38.1 (1.5)
48.26 (1.9)
58.42 (2.3)
68.58 (2.7)
78.74 (3.1)
[Board]
D ±0.2 (0.007)
±0.15 (0.005)
2.54
(0.
10)±
0.15
(0.0
09)
φ2.8 (0.110) +0.15(0.005)–0 hole
Bφ1 (0.039)+0.1(0.0034) hole
FCN-360 Series
15Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/Specificationssubject to change
STRAIGHT TYPE (JACK) DIMENSIONS
Unit: mm (in.)
BOARD MOUTING HOLE LAYOUT
Unit: mm (in.)
D
B
A
C
8.25
(0.
324)
2.54
(0.
10)
4.2
(0.1
65)10
.8 (
0.42
5)
5.8
(0.2
28)
0.71 (0.027)
φ2.8 (0.110)
2.54 (0.10)
6 (0
.236
)
4 (0
.157
)
6 (0.236)
AB
Diagonal length
1
PART NUMBERS AND DIMENSIONSNumber ofcontacts
8
16
24
32
40
48
56
64
Part number
FCN-364J008-AU
FCN-364J016-AU
FCN-364J024-AU
FCN-364J032-AU
FCN-364J040-AU
FCN-364J048-AU
FCN-364J056-AU
FCN-364J064-AU
Dimensions: mm (in.)A
28.84 (1.135)
39.0 (1.535)
49.16 (1.935)
59.32 (2.335)
69.48 (2.735)
79.64 (3.135)
89.8 (3.535)
99.96 (3.935)
B
23.34 (0.918)
33.5 (1.318)
43.66 (1.718)
53.82 (2.118)
63.98 (2.518)
74.14 (2.918)
84.3 (3.318)
94.46 (3.718)
C
17.84 (0.702)
28.0 (1.102)
38.16 (1.502)
48.32 (1.902)
58.48 (2.302)
68.64 (2.702)
78.8 (3.102)
88.96 (3.502)
D
7.62 (0.3)
17.78 (0.7)
27.94 (1.1)
38.1 (1.5)
48.26 (1.9)
58.42 (2.3)
68.58 (2.7)
78.74 (3.1)
[Board]
D ±0.2 (0.007)
±0.15 (0.005)
2.54
(0.
10)±
0.15
(0.0
09)
φ2.8 (0.110) +0.15(0.005)–0 hole
B φ1 (0.039) +0.1(0.0034)hole
RIGHT-ANGLE TYPE (PLUG) • DIMENSIONS
N
0 "'
e e
N ;JI; .,;
nn--- ---nn N
C, C, cc I C, C, C, C, /
2.54 (0.10)
C
.....
---+----- ---
2.8 (0.110)
0.71 (0.027)
Diagonal length
B
---!--------
• MOUTING HOLE LAYOUT
[Board] § 0 --1-----+fi-l--- --- 2
+---i-- ---=l''I==---+:::s;:=r
.._ ___ B ±o.,s(o.oos) ¢2.8 (0 110)jl15<0-005)hole
¢1 (0 039t0-1co0039) hole
Unit: mm in.
• PART NUMBERS AND DIMENSIONS
Number of Part number
contacts A
8 FCN-365P00S.AU 28.84 (1.135)
16 FCN-365P01 S.AU 39.0 (1.535)
24 FCN-365P024-AU 49.16 (1.935)
32 FCN-365P032-AU 59.32 (2.335)
40 FCN-365P040.AU 69.48 (2.735)
48 FCN-365P04S.AU 79.64 (3.135)
56 FCN-365P05S.AU 89.8 (3.535)
64 FCN-365P064-AU 99.96 (3.935)
e
"'
• NOTE
FCN-360 Series
3 (0.118), I I. 0
Unit: mm (in.)
• Note on mounting a right-angle plug on a
board
Metal fitting Plug Mount the connector so that itPc
0 /, projects from the board by at
\ least 1.5 mm (0.059 in.) . 1.5 mm (0.059 in.)
Dimensions: mm (in.)
B C D
23.34 (0.918) 17.84 (0. 702) 7.62 (0.3)
33.5 (1.318) 28.0 (1.102) 17.78 (0.7)
43.66(1.718) 38.16 (1.502) 27.94 (1.1)
53.82 (2.118) 48.32 (1.902) 38.1 (1.5)
63.98 (2.518) 58.48 (2.302) 48.26 (1.9)
74.14 (2.918) 68.64 (2. 702) 58.42 (2.3)
84.3 (3.318) 78.8 (3.102) 68.58 (2.7)
94.46 (3.718) 88.96 (3.502) 78.74 (3.1)
Specifications subject to change Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/ 16
FCN-360 Series
18Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/Specificationssubject to change
RIGHT-ANGLE TYPE (JACK) DIMENSIONS
Unit: mm (in.)
MOUTING HOLE LAYOUT
PART NUMBERS AND DIMENSIONSNumber ofcontacts
8
16
24
32
40
48
56
64
Part number
FCN-365J008-AU
FCN-365J016-AU
FCN-365J024-AU
FCN-365J032-AU
FCN-365J040-AU
FCN-365J048-AU
FCN-365J056-AU
FCN-365J064-AU
Dimensions: mm (in.)
Unit: mm (in.)
• Note on mounting a right-angle jack on aboardMount the connector so that it projects from the
board by at least 5 mm (0.197 in.).
D
C
A
8.25
(0.
324)
4 (0
.157
)5
(0.1
96)
11 (
0.43
3)
5 (0
.196
)
φ2.8 (0.110)
0.8 (0.031)
2.54 (0.10)
2.54
(0.
10)
3 (0.118)
8 (0
.314
)
B
2.54
(0.
10)
AB
1
Diagonal length
3.27
(0.
128)
±0.
15(0
.005
)
5 (0
.196
)
[Board]Edge of board
D ±0.2 (0.007)
±0.15 (0.005)
2.54
(0.
10)±
0.15
(0.0
09)
φ2.8 (0.110)+0.15(0.005)–0 hole
B φ1 (0.039)+0.1(0.0034) hole
A
28.84 (1.135)
39.0 (1.535)
49.16 (1.935)
59.32 (2.335)
69.48 (2.735)
79.64 (3.135)
89.8 (3.535)
99.96 (3.935)
B
23.34 (0.918)
33.5 (1.318)
43.66 (1.718)
53.82 (2.118)
63.98 (2.518)
74.14 (2.918)
84.3 (3.318)
94.46 (3.718)
C
17.84 (0.702)
28.0 (1.102)
38.16 (1.502)
48.32 (1.902)
58.48 (2.302)
68.64 (2.702)
78.8 (3.102)
88.96 (3.502)
D
7.62 (0.3)
17.78 (0.7)
27.94 (1.1)
38.1 (1.5)
48.26 (1.9)
58.42 (2.3)
68.58 (2.7)
78.74 (3.1)
FCN-360 Series
19Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/Specificationssubject to change
Close-end cover
FCN-367J008-AU/F
FCN-367J016-AU/F
FCN-367J024-AU/F
FCN-367J032-AU/F
FCN-367J040-AU/FW*
FCN-367J048-AU/F
FCN-367J056-AU/F
FCN-367J064-AU/F
IDC TYPE (JACK) DIMENSIONS
Unit: mm (in.)
PART NUMBERS AND DIMENSIONSNumber ofcontacts
8
16
24
32
40
48
56
64
Dimensions: mm (in.)Through-end cover
FCN-367J008-AU/H
FCN-367J016-AU/H
FCN-367J024-AU/H
FCN-367J032-AU/H
FCN-367J040-AU/H
FCN-367J048-AU/H
FCN-367J056-AU/H
FCN-367J064-AU/H
Part number
A
2.54
(0.
10)B
C
2.54 (0.10)
8.25(0.324)
6 (0.236)
5 (0
.196
)
11.5
(0.
452)
4 (0
.157
) A
15.7
(0.
618)
A
31 (
1.22
0)
10 (
0.39
3)
φ5 (0.196)
M2.6 (0.102)
[Lock-screw]
[Strain relief]
[Closed-end type]
[Connector cover with IDC holders]
[Connector body]
8.25(0.324)
5 (0
.196
)
8.25(0.324)
6 (0
.236
)
A
[Through-end type]4
(0.1
57) 8.25
(0.324)
5 (0
.196
)
A
28.84 (1.135)
39.0 (1.535)
49.16 (1.935)
59.32 (2.335)
69.48 (2.735)
79.64 (3.135)
89.8 (3.535)
99.96 (3.935)
B
23.34 (0.918)
33.5 (1.318)
43.66 (1.718)
53.82 (2.118)
63.98 (2.518)
74.14 (2.918)
84.3 (3.318)
94.46 (3.718)
D
7.62 (0.3)
17.78 (0.7)
27.94 (1.1)
38.1 (1.5)
48.26 (1.9)
58.42 (2.3)
68.58 (2.7)
78.74 (3.1)
*: FCN-367J040-AU/F is replaced by part number FCN-367J040-AU/FW, which indicates change of manufacturing location for this device.
FCN-360 Series
20Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/Specificationssubject to change
IDC TOOLSSpecial IDC tools are used to assemble FCN-360 series
connectors and flat cables.
FEATURES• The mechanisms are simple, so even novices can use
them easily.
• Those who already have Fujitsu-manufactured IDC toolsfor other series connectors need only purchase thelocator plate.
The hand press and cable cutter are designed to be usedin common with all connectors.
• The assembly of cables and connectors with variousnumbers of contacts can be done by selective setting ofthe connector guides to the specified positions.
• The cable cutter has an extremely sharp cutting edge.
Notes: • A detailed operation manual and instructionmanual for IDC tools are available upon request.
• Should any question arise in using the IDC tools,consult our branch offices or agents in yourarea.
Hand press Cable cutter Locator plate (That
for the 790 series
is shown in the
photograph.)
ORDERING CODES FOR IDC TOOLS
Tool name
Cable cutter (common)
Hand press (common)
Locator plate (for 360 series connectors)
Part number
FCN-707T-T001/H
FCN-707T-T101/H
FCN-367T-T012/H
The hand press and cable cutter can be used for other IDC connectors.
COVER COMBINATIONS BETWEEN COVERS AND CONNECTORS
Connector
Cover
FCN-360C-B
FCN-360C-C
FCN-360C-D
FCN-360C-E
FCN-360C064-F
FCN-360C040-G1
FCN-360C040-H/E
FCN-360C040-J1
Plug
Soldering Wire-wrapping CrimpingSoldering
Jack
8 16 24 32 40 48 56 64
Number of contacts
These covers cannot be used for IDC connectors.
FCN-360 Series
21Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/Specificationssubject to change
COVER (TYPE B) DIMENSIONS
Unit: mm (in.)
EXPLODED VIEW
PART NUMBERS AND DIMENSIONSNumber ofcontacts
816243240485664
Part number
FCN-360C008-BFCN-360C016-BFCN-360C024-BFCN-360C032-BFCN-360C040-BFCN-360C048-BFCN-360C056-BFCN-360C064-B
Dimensions: mm (in.)B
23.34 (0.918)33.50 (1.318)43.66 (1.718)53.82 (2.118)63.98 (2.518)74.14 (2.918)84.30 (3.318)94.46 (3.718)
F32.08 (1.262)42.24 (1.662)52.40 (2.062)62.56 (2.462)72.72 (2.862)82.88 (3.262)93.04 (3.662)103.20 (4.062)
G———
2.0 (0.078)6.0 (0.236)10.0 (0.393)14.0 (0.551)18.0 (0.708)
Hφ 5.7 (0.224)φ 5.7 (0.224)φ 8.0 (0.314)8.0 (0.314)8.0 (0.314)8.0 (0.314)8.0 (0.314)8.0 (0.314)
Two M2 mm (0.079 in.) thread × 8 mm (0.315 in.) long pan head machine screws (shorter)
Four M2 mm (0.079 in.) thread nuts
Two washers
Case
Connector
Two lock-screws
Two M2 mm (0.079 in.) thread × 10 mm (0.394 in.) long pan head machine screws (longer)
Note: The screws, nuts, washers, and lock-screwsare attached to the cover.
GR
H
F
B
28 (
1.10
2)
37 (
1.45
6)
46 (
1.81
1)
1 (0
.039
)
14 mm (0.551 in.) max
10.3 (0.405)
FUJITSU
R: 2.84 mm (0.112 in.) (8 and 16 contacts)R: 4.0 mm (0.157 in.) (24 to 64 contacts)
FCN-360 Series
22Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/Specificationssubject to change
COVER FOR CABLE TO CABLE CONNECTION (TYPE C) DIMENSIONS
Unit: mm (in.)
G
R
H
F
28 (
1.10
2
46 (
1.81
1)
1 (0.0
39)
14 mm (0.551 in.) max.
10.3 (0.405)
FUJITSU
Metal fittings
Note: This cover can becombined with a cover oftype B, D, or E for cable-to-cable connection.
EXPLODED VIEW
Two M2 mm (0.079 in.) thread × 8 mm (0.315 in.) long pan head machine screws (shorter)
Four M2 mm (0.079 in.) thread nuts
Two washers
Case
Connector
Two M2 mm (0.079 in.) thread × 10 mm (0.394 in.) long pan head machine screws (longer)Two screws for mounting
metal fittings
ConnectorTwo metal fittings
PART NUMBERS AND DIMENSIONS
Note: The screws, nuts, washers, and accessoryare attached to the cover.
Number ofcontacts
816243240485664
Part number
FCN-360C008-CFCN-360C016-CFCN-360C024-CFCN-360C032-CFCN-360C040-CFCN-360C048-CFCN-360C056-CFCN-360C064-C
Dimensions: mm (in.)
R: 2.84 mm (0.112 in.) (8 and 16 contacts)
R: 4.0 mm (0.157 in.) (24 and 64 contacts)
Hφ 5.7 (0.224)φ 5.7 (0.224)φ 8.0 (0.314)8.0 (0.314)8.0 (0.314)8.0 (0.314)8.0 (0.314)8.0 (0.314)
G———
2.0 (0.078)6.0 (0.236)10.0 (0.393)14.0 (0.551)18.0 (0.708)
F32.08 (1.262)42.24 (1.662)52.40 (2.062)62.56 (2.462)72.72 (2.862)82.88 (3.262)93.04 (3.662)103.20 (4.062)
FCN-360 Series
23Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/Specificationssubject to change
Four M2 mm (0.079 in.) thread × 8 mm (0.315 in.) long pan head machine screws (shorter)
Four M2 mm (0.079 in.) thread nuts
Two cable clamps
Case
Connector
Two lock-screws
COVER (WIDE OPENING TYPE) (TYPE D) DIMENSIONS
Unit: mm (in.)
EXPLODED VIEW
Note: The screws, nuts, cable clamp, and lock-screws are attached to the cover.
ICable clamp
7.5
(0.2
95)
F
B
37 (
1.45
6)
14 mm (0.551 in.) max.
FUJITSU
10.5
(0.4
13)
28 (
1.10
2) 46 (
1.81
1)
1 (0
.039
)
10.3 (0.405)
PART NUMBERS AND DIMENSIONSNumber ofcontacts
40485664
Part number
FCN-360C040-DFCN-360C048-DFCN-360C056-DFCN-360C064-D
Dimensions: mm (in.)B
63.98 (2.518)74.14 (2.918)84.30 (3.318)94.46 (3.718)
F72.72 (2.862)82.88 (3.262)93.04 (3.662)
103.20 (4.062)
I8.0 (0.314)
12.0 (0.472)16.0 (0.629)20.0 (0.789)
FCN-360 Series
24Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/Specificationssubject to change
COVER (LONG-SCREW TYPE) (TYPE E) DIMENSIONS
Unit: mm (in.)
EXPLODED VIEW
PART NUMBERS AND DIMENSIONSNumber ofcontacts
816243240485664
Part number
FCN-360C008-EFCN-360C016-EFCN-360C024-EFCN-360C032-EFCN-360C040-EFCN-360C048-EFCN-360C056-EFCN-360C064-E
Dimensions: mm (in.)
Note: The screws, nuts, washers, and lock-screwsare attached to the cover.
Two M2 mm (0.079 in.) thread × 8 mm (0.315 in.) long pan head machine screws (shorter)
Four M2 mm (0.079 in.) thread nuts
Two washers
Case
Connector
Two lock-screws
Two M2 mm (0.079 in.) thread × 10 mm (0.394 in.) long pan head machine screws (longer)
R: 2.84 mm (0.112 in.) (8 and 16 contacts)
R: 4.0 mm (0.157 in.) (24 and 64 contacts)
Hφ 5.7 (0.224)φ 5.7 (0.224)φ 8.0 (0.314)8.0 (0.314)8.0 (0.314)8.0 (0.314)8.0 (0.314)8.0 (0.314)
B23.34 (0.918)33.50 (1.318)43.66 (1.718)53.82 (2.118)63.98 (2.518)74.14 (2.918)84.30 (3.318)94.46 (3.718)
F32.08 (1.262)42.24 (1.662)52.40 (2.062)62.56 (2.462)72.72 (2.862)82.88 (3.262)93.04 (3.662)
103.20 (4.062)
G———
2.0 (0.078)6.0 (0.236)
10.0 (0.393)14.0 (0.551)18.0 (0.708)
GR
H
F
B
14 mm (0.551 in.) max.
FUJITSU53
(2.
086)
28 (
1.10
2)
46 (
1.81
1)
1 (0
.039
)
10.3 (0.405)
FCN-360 Series
25Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/Specificationssubject to change
COVER (STRAIGHT CABLE-OUT COVER) (TYPE F) DIMENSIONS
Unit: mm (in.)
EXPLODED VIEW
PART NUMBERFCN-360C064-F
Note: The screws, nuts, cable clamps, and lock-screws are attached to the cover.
Six M2 mm (0.079 in.) thread × 8 mm (0.315 in.) long pan head machine screws
Six M2 mm (0.079 in.) thread nuts
Case
Connector
Two lock-screws
Two cable clamps
6 (0
.236
)
103.2 (4.062)
30.5 (1.200)
28 (
1.10
2)
46 (
1.81
1)
55 (
2.16
5)
1 (0
.039
)
14 mm (0.551 in.) max.
10.3 (0.405)
FUJITSU
10 (
0.39
3)
8 (0
.314
)
37 (
1.45
6)
94.46 (3.718)
17.5 (10.688)
19.5 (0.767)Section S
Detail of section S
FCN-360 Series
26Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/Specificationssubject to change
COVER (RIGHT ANGLE CABLE-OUT COVER) (TYPE G1) DIMENSIONS
Unit: mm (in.)
EXPLODED VIEW
Case
Connector
Two M2.6 mm (0.102 in.) thread × 8 mm (0.315 in.) long pan head machine screws
Two cable clamps
Case
Slider
LOCKED STATE METAL FITTINGS
Metal fittingsFCN-360A11
PC board 1 mm (0.039 in.) min.
F
6 (0
.236
)
Note: After connectors are mated, moving theslider locks the connectors.
Note: The FCN-360A 1 1 - m e t a l -fittings areused for thiscover.
PART NUMBERFCN-360C040-G1
F
17 (0.669)
10(0.393)
81.48 (3.207)
17(0
.669
)19
(0.7
48)
6 (0
.236
)
20 (
0.78
7)
14.65 (0.576)
20 (0.787)
ø9 (0.354)
FCN-360 Series
27Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/Specificationssubject to change
COVER (RIGHT ANGLE CABLEOUT COVER) (TYPE H/E) DIMENSIONS
Unit: mm (in.)
EXPLODED VIEW
Material: Zync die cast
Plating: Nickel plating
1 (0.039)
F
1 (0.039)17
(0.669)63.98 (2.518)
43.98 (1.731)
72.48 (2.853)
1 (0
.039
)46
(1.
811)
19 (
0.74
8)
12 (
0.47
2)
10 (0.393)
M2.5 (0.098) × 8 (0.314)
M2.5 (0.039)
φ11 (0.433)
Cable hole
Through-hole
PART NUMBERFCN-360C040-H/E
Note: The screws, cable clamp, and lock-screwsare attached to the cover.
Case
Connector
Two lock-screws
Two M2.5 mm (0.098 in.) thread × 8 mm (0.315 in.) long pan head machine screws
Cable clamp
Two M2.5 mm (0.098 in.) thread × 5 mm (0.197 in.) long pan head machine screws
FCN-360 Series
28Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/Specificationssubject to change
COVER (OBTUSE ANGLE CABLE-OUT COVER (40 CONTACTS ONLY)) (TYPE J1) DIMENSIONS
Unit: mm (in.)
EXPLODED VIEW
Case
Connector
Cable clamp
Three M2 mm (0.079 in.) thread × 14 mm (0.551 in.) long screws
Case
Two M2.6 mm (0.102 in.) thread × 25 mm (0.984 in.) long screws
Two M2.6 mm (0.102 in.) thread × 12 mm (0.472 in.) long screws
Two M2.6 mm (0.102 in.) thread nuts
Three M2 mm (0.079 in.) thread nuts
PART NUMBERFCN-360C040-J1
F
63.98 (2.518)
24 (
0.94
4)46 (
1.81
1)1
(0.0
39)
771.73 (2.824) 10.3 (0.405)
20 (0.787)
M2 (0.078) × 14 (0.511)
Three screws
M2.6 (0.102) × 25 (0.984)
Two screws
Cable holeφ12 (0.472)
FCN-360 Series
29Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/Specificationssubject to change
LOW PROFILE COVER (OBTUSE ANGLE CABLE -OUT) (TYPE J2) DIMENSION
Unit: mm (in.)
EXPLODED VIEW
Case
Connector
Cable clamp
Three M2 mm (0.079 in.) thread × 8 mm (0.315 in.) long screws
Case
Two M2.6 mm (0.102 in.) thread × 25 mm (0.984 in.) long screws
Two M2.6 mm (0.102 in.) thread × 6 mm (0.236 in.) long screws
Two M2.6 mm (0.102 in.) thread nuts
Three M2 mm (0.079 in.) thread nuts
PART NUMBERFCN-360C024-J2
FCN-360C040-J2
F
46 (
1.81
1)
M2 (0.078)
M2.6 mm (0.102 in.) thread machine screw with washer
10.3 (0.405)
51.41 (2.024)
29.66 (1.167)
1 (0
.039
)
24 (
0.94
4)
9.5
(0.3
74)
30˚
43.66 (1.718)
12
6 (MAX)
5 (MIN)
View from B
R4
F
2225
12.7
520°
B
63.98
71.73
B
8.70
17.9
View from BM2.6 mm machinescrew with washer
M2 (0.078)
M2 (0.078)
46 (
1.81
1)
1 (0
.039
)24
(0.
944)
M2 (0.078)
10.3 (0.405)
Part number: FCN-360C024-J2 (24 contacts) Part number: FCN-360C040-J2 (40 contacts)
FCN-360 Series
30Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/Specificationssubject to change
ACCESSORIES MOUNTING SYLE
[Right-angle mounting metal fitting]
M2.6 × 10
Metal fitting Plug or jack
PCB
Jack with cover or plug with cover
Note: The M2.6 mm (0.102 in.) thread × 10 mm (0.394 in.) long machine screw shall be separately prepared.
Jack with cover
Plug
PCB
Metal fitting
[Straight mounting metal fitting]
M2.6 × 8
Note: The M2.6 mm (0.102 in.) thread × 8 mm (0.315 in.) long machine screw shall be separately prepared.
[Straight mounting round metal fitting]
Metal fitting
M2.6 × 8
PCB
Plug or jack
Jack with cover or plug with cover
Note: The M2.6 mm (0.102 in.) thread × 8 mm (0.315 in.) long machine screw shall be separately prepared.
SELECTION OF METAL FITTINGS ACCORDING TO COMBINATION OF CONNECTORSAND COVERS
361P
362P
364P
365P
361J
With cover
FCN-360A4
FCN-360A1
FCN-360A1
FCN-360A2
Without cover
FCN-360A5
FCN-360A6
FCN-360A6
FCN-360A3
362J
With cover
FCN-360A4
FCN-360A1
FCN-360A1
FCN-360A2
Without cover
FCN-360A5
FCN-360A6
FCN-360A6
FCN-360A3
363J
With cover
FCN-360A4
FCN-360A1
FCN-360A1
FCN-360A2
Without cover
FCN-360A5
FCN-360A6
FCN-360A6
FCN-360A3
364J
With cover
FCN-360A4
FCN-360A1
FCN-360A1
FCN-360A2
Without cover
FCN-360A5
FCN-360A6
FCN-360A6
FCN-360A3
367J
With cover
—
—
—
—
Without cover
FCN-360A5
FCN-360A6
FCN-360A6
FCN-360A3
Cover mounting sideJack
Plug
Metalfittingmountingside
Metalfitting partnumber
361J
362J
363J
364J
365J
367J
361P
With cover
FCN-360A4
FCN-360A4
FCN-360A4
FCN-360A4
FCN-360A10(FCN-360A8)
FCN-360A4
Without cover
FCN-360A5
FCN-360A5
FCN-360A5
FCN-360A5
FCN-360A9
FCN-360A5
Cover mounting sidePlug
Jack
361P
With cover
—
—
—
—
—
—
Without cover
FCN-360A7
FCN-360A7
FCN-360A7
FCN-360A7
FCN-360A9
FCN-360A7
364P
With cover
—
—
—
—
—
—
Without cover
FCN-360A7
FCN-360A7
FCN-360A7
FCN-360A7
FCN-360A9
FCN-360A7
Metalfittingmountingside
Metalfitting partnumber
Note: When the jack or plug without a cover (shaded part) is used, have M2.6 × 8 mm machine screws readyinorder to tighten the connector.
FCN-360 Series
31Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/Specificationssubject to change
Shape
Unit: mm (in.)
Shape
Unit: mm (in.)
SHAPES AND DIMENSIONS OF METAL FITTINGS1.Straight Mounting Metal Fittings
Part numberSymbol
A
FCN-360A1
5.3 (0.208)
FCN-360A6
6.3 (0.248)
2.Right-angle Mounting Metal Fittings
Part numberSymbol
B
C
FCN-360A2
3 (0.118)
9 (0.354)
FCN-360A3
4 (0.157)
10 (0.393)
Shape
Unit: mm (in.)
Part numberSymbol
B
C
FCN-360A8
5.3 (0.208)
13.3 (0.523)
FCN-360A9
6.3 (0.248)
14.3 (0.526)
Shape
Unit: mm (in.)
Part numberSymbol
FCN-360A10
Unit: mm (in.)
Part numberSymbol
FCN-360A11
Unit: mm (in.)
3.Straight Mounting Round Metal Fittings
Part numberSymbol
D
FCN-360A4
7.1(0.279)
FCN-360A5
9.9 (0.389)
FCN-360A7
8.1 (0.318)
A5.5 (0.216)
8.25
(0.3
26)
M2.6 (0.102)
BC4
(0.1
57)
5.5 (0.216)
7(0
.275
)
M2.6 (0.102)
BC4
(0.1
57)
5.4 (0.212)
7.5
(0.2
95)
M2.6 (0.102)
4(0
.157
)
5.3 (0.208)
7.5
(0.2
95)
M2.6 (0.102)M2.6 (0.102)
5.5
(0.2
16)
4.6
(0.1
81)
8.1(0.318)
1(0.039)
4 (0
.157
)
7(0
.275
)
M2.6 (0.102)
5.5 (0.216)6
(0.236)1(0.039)
3 (0
.118
)
D5.25 (0.206)
M2.6 (0.102)
6(0
.236
)
FCN-360 Series
32Dimensions are in millimeters (inches) http://us.fujitsu.com/connectors/Specificationssubject to change
Contact
Copyright
All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Copyright ©2017 Fujitsu Components America, Inc. All rights reserved. Revised May 16, 2017.
JapanFUJITSU COMPONENT LIMITEDShinagawa Seaside Park Tower12-4, Higashi-shinagawa 4-chome,Tokyo 140 0002, JapanTel: (81-3) 3450-1681Fax: (81-3) 3474-2385Email: [email protected]: www.fujitsu.com/jp/group/fcl/en/
North and South AmericaFUJITSU COMPONENTS AMERICA, INC.2290 North First Street, Suite 212 San Jose, CA 95131 U.S.A.Tel: (1-408) 745-4900Fax: (1-408) 745-4970Email: [email protected]: http://us.fujitsu.com/components/
EuropeFUJITSU COMPONENTS EUROPE B.V.Diamantlaan 252132 WV HoofddorpNetherlandsTel: (31-23) 5560910Fax: (31-23) 5560950Email: [email protected]: emea.fujitsu.com/components/
Asia PacificFUJITSU COMPONENTS ASIA, Ltd.102E Pasir Panjang Road#01-01 Citilink Warehouse Complex, Singapore 118529Tel: (65) 6375-8560 / Fax: (65) 6273-3021Email: [email protected]/sg/products/devices/components/
ChinaFUJITSU ELECTRONIC COMPONENTS (SHANGHAI) CO., LTD.Unit 4306, InterContinental Center100 Yu Tong Road, Shanghai 200070, ChinaTel: (86 21) 3253 0998 /Fax: (86 21) 3253 0997Email: [email protected]/sg/products/devices/components/
Hong KongFUJITSU COMPONENTS HONG KONG Co., Ltd.Room 06, 28/F, Greenfield Tower, Concordia Plaza, No.1 Science Museum Road, Tsim Sha Tsui East, Kowloon, Hong KongTel: (852) 2881 8495 Fax: (852) 2894 9512Email: [email protected]/sg/products/devices/components/
KoreaFUJITSU COMPONENTS KOREA, LTD.Alpha Tower #403, 645 Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, 13524 KoreaTel: (82 31) 708-7108Fax: (82 31) 709-7108Email: [email protected]/sg/products/devices/components/