Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Henderson’s liquid application system can be used for more than just snow and ice prevention. The Henderson LAS can be used for anti-icing, deicing, dust control, weed control, water transporting, plant watering, soil stabilization and fire control...all from one unit!
THE LAS HAS THE FOLLOWING FEATURES: nOne, two, or three lane applicationsnSlips easily into a dump body with the help of
front and side wheel glidesnGlass-filled polypropylene fittings for good
resistance to corrosion and impactnManifold style fittings for ease of servicenClip-on nozzle bodies for easy removal to clean
or for maintenancenPowder-coated mild steel or 304 stainless
steel frames
OPTIONAL EQUIPMENT:nSurge bustersnSelf-loading leg kitsnHose reelsnChassis mountsnHigh and low pressure wash systemsnSeveral tank sizesnLift and tie down frame, available in mild steel
or 304 stainless steel
BOOM OPTIONS:nSingle BoomnDual BoomnVariable Orifice Nozzles
POLY TANK OPTIONS:n2,000 gallon, 1,800 gallon, 1,635 gallon, 1,235 gallon,
and 925 gallon capacitiesnOther tanks are available upon request
COMPATIBLE WITH ANY STANDARD CONTROLLER:nForce AmericanComponent TechnologynRaven IndustriesnDickey-johnnMicro TraknAnd others...
Ready for the Storm
LAS®
L I Q U I D A P P L I C A T I O N S Y S T E M
Free standing horizontal bulk storage tanks are manufactured from UV stabilized, high-density polyethylene. 16” vented lid. Tanks are equipped with molded-in legs to support the tank, and band locators for tie-downs as well as baffling. Tank walls are translucent for level viewing and equipped with gallon indicators. Tank tie-down hoops are powder-coated mild steel. Stainless steel is optional.
OPTIONALSurge Busters are the most effective solution for re-ducing or eliminating sloshing in tanks. They provide longer tank life and increase vehicle safety.
Standard valve for self-filling of unit.
OPTIONALRear-mounted ladder available in powder-coated mild steel or stainless steel.
OPTIONALMulti-lane boom with adjustable nozzles.
OPTIONALHeavy-duty self-loading leg frame. Front legs rotate up as unit loads into truck. Adjusts to multiple chassis heights. Quick-release pin for fast loading & unloading.Available in powder-coated mild steel or stainless steel.
Standard trunnion style boom valves. Ball valves optional.
Standard front rollers guide while loading.Standard adjustable check valve with a quick disconnect.
OPTIONALLow level liquid sensor
OPTIONALHose reel available with high or low pressure hand held spray guns. Can be ordered to specifications.
Photo shown with optional equipment.
FEATURES & SPECIFICATIONSOPTIONS
© Henderson Products, Inc., A division of Douglas Dynamics, L.L.C., reserves the right in pursuit of continuous product improvement to change specifications used herein. As a custom manufacturer of truck bodies, truck equipment and brine systems, additional product options may be available that are not shown here.
COMPLETE MUNICIPAL SNOW & ICE CONTROL SOLUTIONSPLOWS n WINGS n UNDERBODY SCRAPERS n SAND & SALT SPREADERS n STANDARD & PRECISION SPINNERS n DUMP BODIES n COMBINATION (MUNICIPAL) BODIES
BRINE PRODUCTION & MANAGEMENT SYSTEMS n ANTI-ICE SYSTEMS n PRE-WET SYSTEMS n SLURRY SYSTEMS n COMPLETE TURNKEY PACKAGES
1085 S. Third Street, Manchester, IA 52057Toll Free: (800) 359-4970 www.HendersonProducts.com HP-052 05/20
M A D E I N U S A
CONTRACT: 080818-HPI