View
224
Download
3
Tags:
Embed Size (px)
DESCRIPTION
vibration and structural isolation - construction/industrial products
Citation preview
vibration and structural isolationconstruction/industrial products
Technical data for Regupol®
• RAV100• RAV200
• RAV300• RAV400
• RAV500• RAV600
2
Regupol® RAV100
Regupol® RAV200
Regupol® RAV300
Regupol® RAV400
Regupol® RAV500
Regupol® RAV600
Product range Applications Construction Building isolation Foundation isolationStructural isolationResilient seatingsFloating floorsStairs and landings
IndustrialInertia plinths Machinery mounting pads/stripsMachine foundationsMass spring systems Plant rooms General workshop machinery
General M&E plantACU’s Refrigeration equipment Pumps Lift motors GeneratorsBoilersPressesGuillotinesMilling machines
Infrastructure Rail and tunnel construction Road and bridge construction
3
The Regupol® portfolio provides access to a range of high performing and cost effectiveanti-vibration solutions, designed to overcomeall types of vibration challenges in any industry sector.
Manufactured from polyurethane-bound rubber granulate, Regupol® products are fullyrecyclable. A wide choice of material gradesare available, including products with a loadbearing range up to and including 1.5N/mm2.
The selection of a Regupol® system will depend on a number of factors, includingload, area and natural frequency required ofthe isolation material.
With a high load bearing capacity andexcellent damping properties, Regupol®
maintains its performance over a longlifespan. It has also been independentlytested by the Institute of Structural Dynamicsat Dresden Technical University for static anddynamic behaviour.
Supplied in easy to lay rolls or individually cutpads/strips, Regupol® is quick and easy toinstall.
Regupol® is one of the leading brands for theisolation of vibration. Standard and bespokesolutions can be offered, for the most simpleand complex applications.
Load Ranges
RAV100 RAV200/300 RAV400 RAV500 RAV600
Regupol®1.50
0.80
0.25
0.10
0.05
0.00
Load
range
(N/m
m2 )
Construction / IndustrialIsolation of structure borne noise and vibration
4
Load Ranges
RAV100 RAV200/300 RAV400 RAV500 RAV600
RAV1001.50
0.80
0.25
0.10
0.05
0.00
Load
range
(N/m
m2 )
1 Load Deflection
Load
range
(N/m
m2 )
Deflection (mm)Samples: 300mm x 300mm
0.050
0.040
0.030
0.020
0.010
0.000
17mm
51mm
34mm
0 1 2 3 4 5 6 7 8 9 10 11 12
RAV100
5
Samples: 300mm x 300mm
200
190
180
170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
Natural frequency (Hz)
Disturbing
freq
uency (Hz)
-40 dB/99% -30 dB/97%
-20 dB/90%
-10 dB/69%
0 dB/0%
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
2 Vibration Isolation
RAV100Lo
ad range
(N/m
m2 )
0.050
0.045
0.040
0.035
0.030
0.025
0.020
0.015
0.010
0.005
0.000
51mm 34mm 17mm
Natural frequency (Hz)
3 Natural Frequency
RAV100
Parameter: Power transmission loss (dB), isolation factor in %
6
Specific load (N/mm2)
Elastic m
odulus (N
/mm
2 )
40 Hz
5 Hz
static
Samples: 300mm x 300mm x 34mm
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.00.000 0.005 0.01 0.015 0.020 0.025 0.030 0.035 0.040 0.045 0.050
4 Modulus of Elasticity
RAV100
5 Dynamic Stiffness
Dynamic stiffness (N/m
m3 )
0.06
0.05
0.04
0.03
0.02
0.01
0.00
60
50
40
30
20
10
0
Permanent load (N/mm2)
40 Hz
5 Hz
static
Samples: 300mm x 300mm x 34mm
0.000 0.010 0.02 0.030 0.040 0.050
Dynamic stiffness (MN/m
3 )
RAV100
10 Hz
10 Hz
7
Technical InformationMeasured 30 minutes after decompression
Compression Set DIN 53572 approx. 4.10 % with 50% deformation/23˚C after 72 hrs.
Tensile Strength DIN 53571 0.30 N/mm2 Minimum
Elongation at Break DIN 53571 60 % Minimum
Tear-Resistance DIN 53515 3.0 N/mm Minimum
Static Modulus Similar Tangential modulusof Elasticity to EN 826 0.10-0.44 N/mm2 see fig. 5
Dynamic Modulus DIN 53513 0.15-1.10 N/mm2 Depending on load and frequency,of Elasticity see fig. 5
The information on this data sheet is based on the current state of our knowledge and experience and issubject to changes and production-related variations without notice.
Relative de
flection (% of thickness)
Loading time (hrs)
0.025 N/mm2
1 10 100 1000 10000 100000
6 Long-term Creep Test
RAV1008
6
4
2
0
Samples: 300mm x 300mm x 34mmFurther creep test data available upon request
Physical PropertiesRegupol® is made of polyurethane-bound rubber granulate.Thickness: 17mm*Roll dimensions: 10m x 1.25m (strips and/or pads are available upon request)Permanent static load range: 0.05 N/mm2
* Dimpled on one side
8
1 Load Deflection
Load
range
(N/m
m2 )
Deflection (mm)Samples: 300mm x 300mm
Load Ranges
RAV100 RAV200/300 RAV400 RAV500 RAV600
RAV2001.50
0.80
0.25
0.10
0.05
0.00
Load
range
(N/m
m2 )
0.10
0.09
0.08
0.07
0.06
0.05
0.04
0.03
0.02
0.01
0.00
30mm15mm 45mm
60mm
RAV200
0 1 2 3 4 5 6 7 8
9
200
190
180
170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
Natural frequency of the system (Hz)
Disturbing
freq
uency (Hz)
-40 dB/99% -30 dB/97%
-20 dB/90%
-10 dB/69%
0 dB/0%
Parameter: Power transmission loss (dB), isolation factor in %
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
2 Vibration Isolation
RAV200Lo
ad range
(N/m
m2 )
0.10
0.09
0.08
0.07
0.06
0.05
0.04
0.03
0.02
0.01
0.00
45mm
60mm
30mm
15mm
Natural frequency (Hz)
Samples: 300mm x 300mm
3 Natural Frequency
RAV200
10
Specific load (N/mm2)
Elastic m
odulus (N
/mm
2 )
40 Hz
10 Hz
5 Hz
static
Samples: 300mm x 300mm x 30mm
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.00.00 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10
4 Modulus of Elasticity
RAV200
5 Dynamic Stiffness
Dynamic stiffness (N/m
m3 )
0.10
0.08
0.06
0.04
0.02
0.00
100
80
60
40
20
0
Permanent load (N/mm2)
40 Hz
10 Hz
5 Hz
static
Samples: 300mm x 300mm x 30mm
0.00 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10
Dynamic stiffness (MN/m
3 )
RAV200
11
Relative de
flection (% of thickness)
Loading time (hrs)
0.05 N/mm2
1 10 100 1000 10000 100000
6 Long-term Creep Test
RAV2004
3
2
1
0
Samples: 300mm x 300mm x 30mmFurther creep test data available upon request
Technical InformationMeasured 30 minutes after decompression
Compression Set DIN 53572 approx. 4.0 % with 50% deformation/23˚C after 72 hrs.
Tensile Strength DIN 53571 0.40 N/mm2 Minimum
Elongation at Break DIN 53571 70 % Minimum
Tear-Resistance DIN 53515 3.40 N/mm Minimum
Mechanical Loss Factor DIN 53513 - -
Static Modulus Similar to Tangential modulusof Elasticity EN 826 0.8-0.90 N/mm2 see fig. 5
Dynamic Modulus DIN 53513 0.6-2.20 N/mm2 Depending on load and frequency,of Elasticity see fig. 5
The information on this data sheet is based on the current state of our knowledge and experience and issubject to changes and production-related variations without notice.
Physical PropertiesRegupol® is made of polyurethane-bound rubber-granulate.Standard thickness: 15mm (other thicknesses are available upon request)Roll dimensions: 10m x 1.25m (strips and/or pads are available upon request)Permanent static load range: 0.1 N/mm2
12
1 Load Deflection
Load
range
(N/m
m2 )
Samples: 300mm x 300mm
Deflection (mm)
Load Ranges
RAV100 RAV200/300 RAV400 RAV500 RAV600
RAV3001.50
0.80
0.25
0.10
0.05
0.00
Load
range
(N/m
m2 )
0.10
0.09
0.08
0.07
0.06
0.05
0.04
0.03
0.02
0.01
0.00
50mm 100mm
RAV300
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
13
200
190
180
170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
Natural frequency of the system (Hz)
Disturbing
freq
uency (Hz)
-40 dB/99% -30 dB/97%
-20 dB/90%
-10 dB/69%
0 dB/0%
Parameter: Power transmission loss (dB), isolation factor in %
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
2 Vibration Isolation
RAV300Lo
ad range
(N/m
m2 )
0.10
0.09
0.08
0.07
0.06
0.05
0.04
0.03
0.02
0.01
0.00
100mm 50mm
Natural frequency (Hz)
Samples: 300mm x 300mm
3 Natural Frequency
RAV300
14
Specific load (N/mm2)
Elastic m
odulus (N
/mm
2 )
40 Hz
10 Hz
5 Hz
static
Samples: 300mm x 300mm x 50mm
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.00.00 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10
4 Modulus of Elasticity
RAV300
5 Dynamic Stiffness
Dynamic stiffness (N/m
m3 )
0.07
0.06
0.05
0.04
0.03
0.02
0.01
0.00
70
60
50
40
30
20
10
0
Permanent load (N/mm2)
40 Hz
10 Hz
5 Hz
static
Samples: 300mm x 300mm x 50mm
0.00 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10
Dynamic stiffness (MN/m
3 )
RAV300
15
Relative de
flection (% of thickness)
Loading time (hrs)
0.05 N/mm2
1 10 100 1000 10000 100000
6 Long-term Creep TestRAV300
6
5
4
3
2
1
0
Samples: 300mm x 300mm x 50mmFurther creep test data available upon request
The information on this data sheet is based on the current state of our knowledge and experience and issubject to changes and production-related variations without notice.
Technical InformationMeasured 30 minutes after decompression
Compression Set DIN 53572 approx. 5.40 % with 50% deformation/23˚C after 72 hrs.
Tensile Strength DIN 53571 0.33 N/mm2 Minimum (measured on a 10-cm-layer)
Elongation at Break DIN 53571 50 % Minimum (measured on a 10-cm-layer)
Tear-Resistance DIN 53515 2.30 N/mm Minimum (measured on a 10-cm-layer)
Static Modulus Similar to Tangential modulusof Elasticity EN 826 0.25-0.75 N/mm2 see fig. 5
Dynamic Modulus DIN 53513 0.60-2.90 N/mm2 Depending on load and frequency,of Elasticity see fig. 5
Physical PropertiesRegupol® is made of polyurethane-bound rubber-granulate.Standard thickness: 50mm Sheet dimensions: 1000mm x 500mm (strips and/or pads are available upon request)Permanent static load range: 0.1 N/mm2
16
1 Load Deflection
Load
range
(N/m
m2 )
Deflection (mm)
Samples: 300mm x 300mm
Load Ranges
RAV100 RAV200/300 RAV400 RAV500 RAV600
RAV4001.50
0.80
0.25
0.10
0.05
0.00
Load
range
(N/m
m2 )
0.25
0.20
0.15
0.10
0.05
0.00
15mm 30mm
45mm
60mm
0 1 2 3 4 5 6 7 8 9 10 11
RAV400
17
200
190
180
170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
Natural frequency of the system (Hz)
Disturbing
freq
uency (Hz)
-40 dB/99% -30 dB/97%
-20 dB/90%
-10 dB/69%
0 dB/0%
Parameter: Power transmission loss (dB), isolation factor in %
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
2 Vibration Isolation
RAV400Lo
ad range
(N/m
m2 )
0.25
0.20
0.15
0.10
0.05
0.00
60mm
30mm
15mm
45mm
Natural frequency (Hz)
Samples: 300mm x 300mm
3 Natural Frequency
RAV400
18
Specific load (N/mm2)
Elastic m
odulus (N
/mm
2 )
40 Hz
10 Hz
5 Hz
static
Samples: 300mm x 300mm x 30mm
6
5
4
3
2
1
00.00 0.05 0.10 0.15 0.20 0.25
4 Modulus of Elasticity
RAV400
5 Dynamic Stiffness
Dynamic stiffness (N/m
m3 )
0.20
0.15
0.10
0.05
0.00
200
150
100
50
0
Permanent load (N/mm2)
40 Hz
10 Hz
5 Hz
static
Samples: 300mm x 300mm x 30mm
0.000 0.025 0.050 0.075 0.100 0.125 0.150 0.175 0.200 0.225 0.250
RAV400
Dynamic stiffness (MN/m
3 )
19
Relative de
flection (% of thickness)
Loading time (hrs)
0.125 N/mm2
1 10 100 1000 10000 100000
6 Long-term Creep Test
RAV4006
5
4
3
2
1
0
Samples: 300mm x 300mm x 30mmFurther creep test data available upon request
The information on this data sheet is based on the current state of our knowledge and experience and issubject to changes and production-related variations without notice.
Technical InformationMeasured 30 minutes after decompression
Compression Set DIN 53572 approx. 4.60 % with 50% deformation/23˚C after 72 hrs.
Tensile Strength DIN 53571 0.65 N/mm2 Minimum
Elongation at Break DIN 53571 65 % Minimum
Tear-Resistance DIN 53515 6.0 N/mm Minimum
Static Modulus Similar to Tangential modulusof Elasticity EN 826 1.20-1.90 N/mm2 see fig. 5
Dynamic Modulus DIN 53513 1.10-4.40 N/mm2 Depending on load and frequency,of Elasticity see fig. 5
Physical PropertiesRegupol® is made of polyurethane-bound rubber-granulate.Standard thickness: 6mm/15mm (other thicknesses available upon request)Roll dimensions: 10m x 1.25m (strips and/or pads are available upon request)Permanent static load range: 0.25 N/mm2
20
Load
range
(N/m
m2 )
Deflection (mm)Samples: 270mm x 270mm
Load Ranges
RAV100 RAV200/300 RAV400 RAV500 RAV600
RAV5001.50
0.80
0.25
0.10
0.05
0.00
Load
range
(N/m
m2 )
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.00 1 2 3 4 5 6 7 8 9 10 11 12 13 14
1 Load DeflectionRAV500
10mm
20mm 30mm 40mm
50mm
60mm
21
200
190
180
170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
Natural frequency of the system (Hz)
Disturbing
freq
uency (Hz)
Parameter: Power transmission loss (dB), isolation factor in %
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
Load
range
(N/m
m2 )
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
10mm
20mm
30mm40mm
50mm
60mm
Natural frequency (Hz)
Samples: 270mm x 270mm
3 Natural Frequency
RAV500
2 Vibration Isolation
RAV500
-40 dB/99% -30 dB/97%
-20 dB/90%
-10 dB/69%
0 dB/0%
22
Specific load (N/mm2)
Elastic m
odulus (N
/mm
2 )
40 Hz
10 Hz
5 Hz
static
Samples: 270mm x 270mm x 20mm
16
14
12
10
8
6
4
2
00.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
4 Modulus of Elasticity
RAV500
5 Dynamic Stiffness
Dynamic stiffness (N/m
m3 )
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
800
700
600
500
400
300
200
100
0
Permanent load (N/mm2)
40 Hz
10 Hz
5 Hz
static
Samples: 270mm x 270mm x 20mm
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
Dynamic stiffness (MN/m
3 )
RAV500
23
Relative de
flection (% of thickness)
Loading time (hrs)
0.4 N/mm2
1 10 100 1000 10000 100000
6 Long-term Creep Test
RAV5004
3
2
1
0
Samples: 270mm x 270mm x 30mmFurther creep test data available upon request
The information on this data sheet is based on the current state of our knowledge and experience and issubject to changes and production-related variations without notice.
Technical InformationMeasured 30 minutes after decompression
Compression Set DIN 53572 approx. 5.90 % with 50% deformation/23˚C after 72 hrs.
Tensile Strength DIN 53571 0.90 N/mm2 Minimum
Elongation at Break DIN 53571 85 % Minimum
Tear-Resistance DIN 53515 8.0 N/mm Minimum
Static Modulus Similar to Tangential modulusof Elasticity EN 826 2.50-5.50 N/mm2 see fig. 5
Dynamic Modulus DIN 53513 3.0-8.80 N/mm2 Depending on load and frequency,of Elasticity see fig. 5
Physical PropertiesRegupol® is made of polyurethane-bound rubber-granulate.Standard thickness: 6mm/10mm (other thicknesses available upon request)Roll dimensions: 10m x 1.25m (strips and/or pads are available upon request)Permanent static load range: 0.8 N/mm2
24
Load
range
(N/m
m2 )
Deflection (mm)Samples: 200mm x 200mm
RAV100 RAV200/300 RAV400 RAV500 RAV600
1.50
0.80
0.25
0.10
0.05
0.00
Load
range
(N/m
m2 )
1.5
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.00 1 2 3 4 5 6 7 8 9 10
10mm
20mm
30mm40mm
50mm
60mm
Load Ranges
RAV600
1 Load DeflectionRAV600
25
200
190
180
170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
Natural frequency of the system (Hz)
Disturbing
freq
uency (Hz)
-40 dB/99% -30 dB/97%
-20 dB/90%
-10 dB/69%
0 dB/0%
Parameter: Power transmission loss (dB), isolation factor in %
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
2 Vibration Isolation
RAV600Lo
ad range
(N/m
m2 )
1.5
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
Samples: 200mm x 200mm
3 Natural Frequency
RAV600
10mm
20mm
30mm40mm50mm
60mm
Natural frequency (Hz)
26
Specific load (N/mm2)
Elastic m
odulus (N
/mm
2 )
40 Hz
5 Hz
static
Samples: 200mm x 200mm x 20mm
40
35
30
25
20
15
10
5
00.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5
4 Modulus of Elasticity
RAV600
10 Hz
5 Dynamic Stiffness
Dynamic stiffness (N/m
m3 )
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
2000
1800
1600
1400
1200
1000
800
600
400
200
0
Permanent load (N/mm2)
40 Hz
10 Hz
5 Hz
static
Samples: 200mm x 200mm x 20mm
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5
Dynamic stiffness (MN/m
3 )
RAV600
27
Relative de
flection (% of thickness)
Loading time (hrs)
0.75 N/mm2
1 10 100 1000 10000 100000
6 Long-term Creep Test
RAV6004
3
2
1
0
Samples: 200mm x 200mm x 30mmFurther creep test data available upon request
The information on this data sheet is based on the current state of our knowledge and experience and issubject to changes and production-related variations without notice.
Technical InformationMeasured 30 minutes after decompression
Compression Set DIN 53572 approx. 5.0 % with 50% deformation/23˚C after 72 hrs.
Tensile Strength DIN 53571 2.20 N/mm2 Minimum
Elongation at Break DIN 53571 120 % Minimum
Tear-Resistance DIN 53515 16.0 N/mm Minimum
Static Modulus Similar Tangential modulusof Elasticity to EN 826 9.80-14.0 N/mm2 see fig. 5
Dynamic Modulus DIN 53513 4.0-18.50 N/mm2 Depending on load and frequency,of Elasticity see fig. 5
Physical PropertiesRegupol® is made of polyurethane-bound rubber-granulate.Standard thickness: 10mm (other thicknesses available upon request)Roll dimensions: 8m x 1.25m (strips and/or pads are available upon request)Permanent static load range: 1.5 N/mm2
General M&E Plant ACU’s Refrigeration equipment Pumps Lift motors General workshop machineryGeneratorsBoilersPressesGuillotinesMilling machines
IndustrialInertia plinths Machinery mounting pads/strips Foundation isolationMass spring systemsPlant rooms
Structural engineering Isolation of steel structures Structural bearings Resilient seatingsStairs and landings
InfrastructureRoad construction Bridge constructionRail and tunnel construction
ConstructionBuiding isolationFoundation isolationStructural isolationFloating floors
Also in the RAME anti-vibration portfolio:Regufoam®
Regupol Acoustics Middle East (RAME) is the Middle East arm of market-leadingRegupol® manufacturer, BSW. Providing exclusive access to the full range of Regupol®
and Regufoam® high performance anti-vibration systems, RAME is setting the standard forvibration control in the Middle East.
From specification through to project completion, RAME has a fully trained technical team ableto provide free advice and on-site support as well as guidance during installation. This combined
product and service offering has led to Regupol® being used on a number of high profile projects,including Dubai Healthcare City and the Marina Hotel, Abu Dhabi. For further information and advice,
please contact the RAME technical sales team.
Regufoam® has been specifically developed and formulated to reduce structure bornenoise and offer high performance vibration isolation. Manufactured in various thicknessesand densities, Regufoam® materials are colour coded for ease of identification. With lownatural frequency and long term elasticity even under heavy loads, Regufoam® delivershigh performance characteristics.
Regufoam® can be used wherever structure borne noise and vibrations require effectiveisolation, including structural/civil engineering, track laying, mechanical engineering,industrial and ship building sectors.
Regupol Acoustics Middle East FZEP.O. Box 125279, Dubai, UAE
Phone: +971-4-3233493Fax: +971-4-3406295
[email protected] and BSW product portfolio certified by DIN EN ISO 9001 DIN EN ISO 14001 OHSAS 18001
Regupol® and Regufoam® are official trademarks of BSW
www.regupolacousticsmiddleeast.com