Railway

S U R FACE &U N D E R G R O U N DR A I LWAY SYSTEMSLIGHTING GUIDE

A guide to the lighting of SURFACE & UNDERGROUNDRAILWAY SYSTEMS

Surface Railway Systems 382Underground Railway Systems 388

381

S U R FACE &U N D E R G R O U N D

R A I LWAY SYSTEMSLIGHTING GUIDE

382

Designplan has worked closely with those involved with railway systems

for more than thirty years. Early projects included work at Euston & Kings

Cross Stations in London, Glasgow Central in Scotland followed by

extensive locomotive sheds in Wolverton.

In the early 80’s a special fitting was designed, in close co-operation with

British Rail engineers, to meet the special needs posed by the introduction

of single operator trains. The resulting fitting was our ‘Brunel’ and following

its development almost every station on the entire Network S.E. system

was converted to include this fitting under canopies in platform areas.

Those that were not quite suited to ‘Brunel’ were provided with new red

‘Sparta’ instead.

Since then we have worked continually with system operators, engineers

& contractors both in the UK & overseas designing, manufacturing &

supplying high quality, long lasting, value for money solutions to the

problems posed by the Railway environment. Indeed the majority of

fittings mentioned in this section of the catalogue are available with the

Designplan ‘Lifetime Guarantee’ see page 29.

The information that follows will, we believe, assist those working &

designing for this, often hostile, environment and will enable the engineer

or architect to select a suitable fitting that has often been specifically

designed for Railway or similar use.

For simplicity we have selected the different areas of Railway

infrastructure and then have made suggestions as to which Designplan

fitting is best suited to light that given area. There are of course

alternatives that appear within our catalogue, should suggestions within

this guide not answer a particular need.

In the event of a special requirement, as is frequently the case with such

installations, then we are always pleased to work with the designer to

create a Bespoke solution. Recent Bespoke projects include a special

linear fitting for canopy areas for stations in the North East of England.

Details of this service are provided on page 357.

Station entrance canopies

Fittings re q u i red can be surface, semi-recessed or fully recessed.

The Brunel (p201) & Aztec (p199) are available in all three options. The

Tuscan range (p153) most often used in recessed form or if a downlighting

solution is sought the RDL (p208) is a weather & vandal resistant answer.

Surface Rail Systems

Tuscan in pit

Birmingham New Street Station Semi Recessed Brunel

Grand Central Station New York City

Parkalux & Centaur LED


383

Station exteriors

Fittings used to light the outsides of station buildings need to be both

weather resistant and importantly, because of their locations in villages &

towns, very strong.

The following list has been selected with both of these criteria in mind but

also, in a number of cases, with aesthetic appearance playing an

important role.

The list provided is extensive & reflects the wide range of fittings we

manufacture that have the selected features mentioned above.

Pantheon (p205), Capella (p260), Ali Quadgrille (p190/191), Quadgrille

(p194/195), Quay (p232), Maxi Callisto (p256), Vertigo (p252/255), Ziggy

(p261), Cloister (p250), Wall Mount Brunel (p204), Corner Brunel (p202),

Corner Quadrangle (p196), Hood (p245), Brunangle (p200) & Quadrato

(p183).

Car Parks — flat

Post top fittings that are weather & vandal resistant.

Solaris (p267), Concourse (p271), Hermes (p274) & Post Top Brunel (p273).

Car Parks — multi story

Linear fluorescent, bulkhead compact fluorescent & discharge fittings

that are weather & vandal resistant.

Parkalux (p148/149), Monitior (p150/151), Sparta (p146/147), Quadrant

(p192), Quadring (p222) & Deluxe Brunel (p201).

Under Bridge or Tracks

Either a standard from the Tuscan range (p153) or a special Tu s c a n

made to suit the project as that shown in the picture above right, for

Dutch Railways, also suitable our Pantheon (p205), Circular Brunel (p238).

Some projects re q u i re a continuous mounting system with in-built cable

management trunking. If re q u i red please contact our technical sales

o ffice 020.8254.2022.

Flat area

Multi story car park Under bridge, Dutch Railways

Quay (p232)



384

Underpass/Subway

Usually an angled or recessed Tuscan (p153), Rampart (p166), Metro

(p144),Tuscan II (p159), Mission (p145) & RDL (p208).

Covered Walkway

Recessed Tuscan (p153), Bergen (p167), Camasys (p162), Metro (p144),

Mission (p145), Parkalux (p148/149), Monitor (p150/151), Aztec (p199),

Deluxe Brunel (p201), Bubble (p226), Spoke (p230) & RDL (p208)

Concourse Area

Ceiling

Flair (p143), RDL (p208), Antares (p351), Metro (p144), Corvo (p89), Sable

(p62), Mink (p63), Recessed Tuscan (p153), Mission (p145), Camasys

(p162) & Parkalux (p148/149).

Wall

Cloister (p250), Quay (p232), Mission (p145), Maxi Callisto (p256), Ali

Quadgrille (p190/191), Quadgrille (p194/195), Vertigo (p252/255),

Pantheon (p205) & Capella (p260).

In-ground

Centaur L.E.D. (p110), Scoop L.E.D. (p108), Centaur (p300)_& Parador

L.E.D. (p119).

Ticket Hall

Camasys (p162), Flair (p143), Mission (p145), RDL (p208), Antares (p351),

Sable (p62), Mink (p63), Recessed Tuscan (p153), & Parkalux (p148/149).

Escalators

Ceiling

RDL (p208), Antares (p351), Camasys (p162), Flair (p143), Mission (p145),

Metro (p144), Sable (p62), Mink (p63), Recessed Tuscan (p153), & Parkalux

(p148/149).

Wall

Bubble (p226), Torino (p55), Maxi Callisto (p256), Ali Quadgrille (p190/191)

& Buccaneer (p179-218).

Escalator side wall

Centaur (p300 & 110), Topaz (p128), Brick Light (p173), Bastion (p170), RDL

(p208) & Zenith (p114).

Grand Central Station, New York City

St. Denis Station, Stade de France, Paris using Metro, page 144.


385

Stairways

Ceiling

RDL (p208), SDL (p217), Aztec (p199), Antares (p351), Sable (p62), Mink

(p63), Corvo (p89), Recessed Tuscan (p153), Metro (p144), & Parkalux

(p148/149).

Wall

Torino (p55), Angle Tuscan (p156), Tuscan II (p159), Quadrato (p183), Ali

Quadgrille (p190/191), Quadgrille (p194/195), Vertigo (p252/255),

Brunangle (p200) & Circo (p220).

Toilets

Buccaneer (p179 & 218), Torino (p55), Camino (p76), Kalico (p77), RDL

(p208), Circo (p220), Quadrant (p192), Quadring (p222), Aztec (p199),

Antares (p351), Recessed Tuscan (p153), Parkalux (p148/149), Mink (63) &

Sable (p62).

Waiting Rooms

Buccaneer (p179 & 218), Kalico (p77), RDL (p208), Circo (p220), Quadrant

(p192), Quadring (p222), Aztec (p199), Flair (p143), Geneva (p36),

Antares (p351), Recessed Tuscan (p153), Parkalux (p148/149), Mink (p63)

& Sable (p62).

Lost Property

Kalico (p77), RDL (p208), Parkalux (p148/149), Sparta (p146/147), Metro

(p144) & Flair (p143).

Plant Rooms

Parkalux (p148/149), Sparta (p146/147), Mink (63), Recessed Tuscan

(p153), Quadrant (p192), Quadring (p222), Kalico (p77) & RDL (p208).

Administration Offices

Mink (p63), Sable (p62), Isis (p34), Venito (p35), Zermatt (p46/47), Geneva

(p36/37), County (p48/49), Kalico (p77) & RDL (p208).

Parkalux (p148/149) Sable (p62)



386

Platforms

Platforms often require special fittings to suit particular site conditions. For

example a unit to fit within a specially constructed ceiling or a fitting

manufactured to ensure that no glare appears on a T.V. screen when

single operator trains are in operation.

We have regularly worked with designers to solve the issues raised by

local conditions & either modified a standard fitting or designed &

manufactured a ‘Bespoke’ solution.

A few examples are off e red on this page however the available

adaptations & designs are endless, simply, what is needed will be provided.

Fittings that are typically used for platforms include:

Parkalux (p148/149), Abrams (p165), Sparta (p146/147), Camasys (p162),

Metro (p144), Recessed Tuscan (p153), Antares (p351) & Deluxe Brunel

(p201) & derivations thereof.

Abrams (p165)


387

The areas where work upon locomotives and rolling stock takes place

a re often prone to particularly arduous working environments. For this

reason modified versions of otherwise standard fittings have been

developed over time to ensure that these conditions can be coped

with. Full details of these alterations can be obtained from our technical

sales office and we recommend that customers discuss their particular

re q u i rements with our technical office to ensure that the corre c t

solution is achieved – 020.8254.2022.

Maintenance Sheds

Tuscan M8887, Sterilux (p353), QL Sterilux (p354/355) & Six Pack (p352).

Washing Plants

Tuscan M8887, Sterilux (p353) & QL Sterilux (p354/355).

Inspection Pits

Tuscan M8887.

Workshops

Sparta (p146/147), Sterilux (p353), Kalico (p77), RDL (p208), & Four or Six

Pack (p352).

Signal Boxes

Inside

Mink (p63), Sable (p62), County (p48/49), Geneva (p36/37), Zermatt

(p46/47), Kalico (p77) & RDL (p208).

Outside

Pantheon (p205), Buccaneer (p179 & 218), Quadrant (p192), Quadring

(p222) & Tuscan II (p159).

General Signs

See pages 319/323.

Rolling Stock Locations

Pantheon (p205) Round QL Sterilux (p354)



388

In a similar way to our experience of working with those involved in

surface railway networks we have for many years worked closely with

designers & engineers on Underground railway system projects.

Most often with London Underground Staff and their appointed design

consultants & contractor partners, but also extensively with the New York

& Paris Metro & Hong Kong MTR engineers.

Notable projects completed in recent times by Designplan are the

relighting of the entire metro system for the City of Liverpool, the supply of

all lighting for the newly built North End Access, at Grand Central Station,

New York City, a contract worth in excess of $1m & the complete

refurbishment of the following underg round stations in London, Kennington,

Tu ffnell Park, St. John’s Wood, Chalk Farm, Manor House and others.

There are similarities between the lighting requirements for Surface &

Underground systems but there are also differences. Both require

equipment built to last many years that are simple to install & maintain.

Both need fittings that have high IP & IK ratings, weather & strength

properties, and both often require an input of Bespoke design &

manufacture to ensure that the special needs of each are built into the

equipment.

One of the more significant differences is that for many underground

projects glass is preferred for the diffusing material in front of lamps.

Where this is needed we have adapted standard fittings, for example our

Quadrant & Tuscan ranges, to meet this requirement or designed purpose

made fittings with glass diffusers & cable management facilities built in.

In the case of London Underground there is a difference between the

requirements & standards below surface, designated ‘Section 12’ and

above surface, non-section 12.

The information that follows will, we believe, assist those working on &

designing Underground Railway Systems and will enable the engineer or

architect to select a suitable fitting that has often been specifically

designed for this purpose.

Where we have a fitting which has been specifically adapted for use or

designed for Underground Systems we provide the specification within

the following pages, otherwise we refer to the page number referring to

the fitting recommended.

If your project requires a Bespoke solution please refer to page 357.

Underground Railway Systems


389

Station entrance canopies

Fittings re q u i red can be surface, semi-recessed or fully recessed. The

Deluxe Brunel (p201) & Aztec (p199) are available in all three options. The

Tuscan range (p153) most often used in recessed form or if a downlighting

solution is sought the RDL (p208) is a weather & vandal resistant answer.

Station exteriors

Fittings used to light the outsides of station buildings need to be both

weather & vandal resistant.

The following list has been selected with both of these criteria in mind but

also, in a number of cases, with aesthetic appearance playing an

important role. The list provided is extensive reflecting the wide range that

we manufacture offering the selected features mentioned above, most

of which are available with our ‘Lifetime Guarantee’, see page 29.

A number are available in surface, semi-recessed & fully recessed designs.

Pantheon (p205), Capella (p260), Ali Quadgrille (p190/191), Quadgrille

(p194/195), Quay (p232), Maxi Callisto (p256), Vertigo (p252/255), Ziggy

(p261), Cloister (p250), RDL (p208), Wall Mount Brunel (p204), Corner

Brunel (p202), Corner Quadrangle (p196), Hood (p245), Brunangle (p204)

& Quadrato (p183).

Emergency Lighting

The majority of fittings mentioned can be provided with self-contained,

central Battery or mains backup emergency & Auto test facilities as

described on pages 313 & 314

In addition we have a number specifically adapted to below surface,

section 12, requirements details of which are provided in the section 12

part of the guide.

Concourse Area & Ticket Halls

This is often a particularly busy part of a station and needs to be well lit.

It is also the area where, at times, designers take the opportunity to

c reate some diff e rences in lighting style, since many other locations,

particularly below surface, tend very much to adopt similar equipment

& aesthetic appearance.

We frequently work with designers to modify existing fittings from our

range or create new ideas for concourse areas.

Where more standard equipment is chosen then versions of Camasys

(p162), Metro (p144), Flair (p143), Mission (p145), Tuscan (p153), often

modified, are installed. Also if recessed downlighting is needed one of our

RDL (p208) range.

Surface, non section 12 areas

Piccadilly (p397) Pantheon (p205)

An installation using Piccadilly



390

Staff areas & offices.

Whilst standard recessed modular fittings (p64) may be suitable or

recessed fittings to suit LG3 or LG7 re q u i rements may be needed, for

example our Sable (p62), there are a number of areas within Underg ro u n d

facilities for which a special fitting to IP21 is pre f e r red. ‘Scipio’ has been

designed in conjunction with London Underg round engineers to meet the

need where it is felt that a limited degree of water ‘seepage’ can occur.

There are two fittings currently available in the ‘Scipio’ range.

Scipio 1: A ‘trough’ reflector type fitting with closed ends to the trough. All

joints are fully welded & the high frequency control gear is mounted

upon the back of the trough. This is then recessed into the body with an

internal flange onto which the trough sits. There is fused plug & socket

connection to the terminal block sited in the back of the body. End

cable entry is provided which should be used with a suitable cable

gland. The back of the body has no piecing in it & the fitting is installed

using external brackets that are welded to the body ends.

The fitting body & reflector are finished white polyester powder coat.

Lamp size

D944/26HFM10242 2×70w

D944/16HFM10242 1×70w

D944/25HFM10242 2×58w

D944/15HFM10242 1×58w

D944/24HFM10242 2×36w

D944/14HFM10242 1×36w

D944/22HFM10242 2×18w

D944/12HFM10242 1×18w

Scipio 2: A recessed modular suitable for 600mm × 600mm square ceiling

grid. The fitting has no holes in the rear, recessed, part that could allow

water in & it is of an all welded construction to seal against water entry.

Louvres are mounted within a perforated front plate that is retained on

wishbone springs. High frequency control gear & lamps are above the

removable section on a demountable tray with a fused plug & socket

connection to a terminal block in the back of the body. 20mm cable

entry is provided adjacent to the terminal block which when used should

be fitted with a suitable cable gland.

Lamp size

D916/2PL24LHFM10243 2×24wPLL

D916/2PL36LHFM10243 2×36wPLL

For surface version add suffix A.

Surface, non section 12 areas

Scipio 1

Scipio 2


391

Walkways

I n c reasingly lighting combined with cable management facilities are being

utliised. Running services within a single unit saves installation costs, makes

maintenance a more simple task and enables significant improvements in

the overall aesthetic look of an area to be achieved. Working with

customers we have either provided standard answers via, for example,

Camasys (p162), or modified other fittings, Metro (p144), Tuscan (p153) and

others. Where requested purpose built solutions have been designed &

m a n u f a c t u red – see Bespoke manufacture – (p357). Where a walkway is

some distance from the actual station then the risk of damage fro m

vandalism rises and a number of our fittings are well suited to provide years

of trouble free life, each available with our ‘lifetime guarantee’ – p 2 9 .

Toilets

Depending upon the frequency of use, the cleaning and maintenance

regime and the location, toilets & washrooms can be perfectly well lit

with “normal” lighting. However, in some cases, they may need to be

provided with a more robust solution where vandalism is possible.

The following fittings are therefore ideally suited where normal conditions

are expected, Kalico (p77), Mink (p63), Geneva (p36/37) Script (p54).

If damage is a possibility then the following will provide protection, RDL

(p208), Buccaneer (p179 &218), Circo (p220), Quadrant (p192), Quadring

(p220), Aztec (p199), Antares (p351), Recessed Tuscan (p153), Parkalux

(p148/149) or Abrams No-Body (p332).

Stairways

S t a i rcases poorly lit inevitably lead to the possibility of accidents & certainly

give rise to feelings of insecurity, there f o re good lighting is essential usually

with the provision of an emergency facility included. Both Tuscan (p153) &

Rampart (p166), will be suitable for stairways but in addition consideration

may be given to Ali Quad (p188/189), Quadrant (p192) & Quadring (p222).

Whilst there are a significant number of other fittings that would be

suitable for stairways the ones suggested are available for non section 12

with polycarbonate diffusers as well as with matching glass diffusers to

comply with section 12 which will allow the designer to carry through the

same design both above & below surface.

Lost Property

Kalico (p77), RDL (p208), Mink (p63), Sable (p62), Parkalux (p148/149) &

Sparta (p146/147).

Plant Rooms

Mink (p63), Buccaneer (p179 & 218), Geneva (p36/37), T5 Monitor (p151),

Tuscan (p153), Quadrant (p192), Quadring (p222) & RDL (p208).



392

The areas where work upon trains and rolling stock takes place are

often prone to particularly arduous working environments. For this

reason modified versions of otherwise standard fittings have been

developed over time to ensure that these conditions can be coped

with. Full details of these alterations can be obtained from our technical

sales office – 020.8254.2022.

Maintenance Sheds

Tuscan M8887, Sterilux (p353) &QL Sterilux (p354) Six Pack (p352).

Washing Plants

Tuscan M8887, Sterilux (p353) &QL Sterilux (p354).

Inspection Pits

Tuscan M8887.

Workshops

Sparta (p146/147), Sterilux (p353) & RDL (p208) Six Pack (p352).

Rolling Stock Locations.

Round QL Sterilux (p287)

Sterilux (p286)


393

Where fittings are to be installed below surface, London Underground

have attached the designation ‘Section 12’ to which such equipment

must comply. There a number of features that are required in order for

compliance to be achieved the most notable being cable to be of a low

smoke & fume type, all glazing to be glass & paints used must meet strict

requirements called up in standard E1042.

L.E.D. Lighting

L.E.D. lighting is becoming ever more popular as the solution to the

lighting or highlighting of particular areas. We have a standard range of

wall & inground L.E.D. fittings (p107/137) that may be useful for

underground as well as above ground areas. Again, as with all of our

range, special & bespoke (p357) fittings can be provided to meet

specific requirements. Use catalogue number from standard page & add

suffix M8277T for the section 12 adaptations.

Escalators

Escalators often start above surface but all end below & there f o re section

12 type fittings are likely to be re q u i red. RDL (p208), Bastion (p170), Bricklight

(p173) , Centaur LED (110), Topaz (p128), Camasys (p162) & Antares (p351)

each with a glass option, would be suitable. Use catalogue number fro m

s t a n d a rd page & add suffix M8277T for the section 12 adaptations.

Plant Rooms

Mission M8277T (p398), Tuscan M8277T (p396), Quadrant M8277T (p397),

Quadring M8277T (p397) & RDL M8277T (p208). Use catalogue number

f rom standard page & add suffix M8277T for the section 12 adaptations.

In-ground

If an in-ground fitting is re q u i red then our Centaur range (p300) or Centaur

with L.E.D. lamps (p109) may be the solution. Use catalogue number fro m

s t a n d a rd page & add suffix M8277T for the section 12 adaptations.

Tunnels

There are some areas in the underground network of tunnels that require

lighting. For these a special fitting has been developed.

Simplon IP65: Body in die cast aluminium finished in black powder coat,

secured to stainless steel fixing plate. High frequency control gear and

lamp on removable gear tray with plug & socket connector to ease

installation & maintenance (Particularly important in these areas). Glass

control lens providing light output in linear pattern along length of tunnel.

Catalogue Number Lamp sizeSIM142PLTLHF 1×42w PLT

Other lamp options available, please contact our technical sales office.

Photometric data contact our technical sales office. Available pre-wired

for rapid installation, contact technical sales office for further information.

Below Surface, Section 12 areas

RDL (p208)

Simplon



394

The lighting of platforms has many & varied solutions entirely dependent

upon the requirements & ideas of the particular designer or engineer

involved.

Over the past thirty & more years Designplan has worked with engineers

in many countries to provide the ideal answer to the particular challenge

posed by each specific platform to be lit. For this reason it is almost

impossible to give a definitive answer as to what fitting to use for

platforms. For general guidance more often than not a version of either

Camasys (p162), Antares (p315) or Tuscan (p153) are the chosen

products. Invariably the standard fitting is modified to a greater or lesser

degree so that the ideal solution is arrived at. See also our Bespoke

Tuscan (p164) & Bespoke Manufacture (p357).

For guidance & as a starting point a recent platform installation at Manor

House underground station, London, used Camasys cable management

system (p162) . The lighting system incorporates two side “wings” which

hinge to reveal cable ways and allow re-lamping.

The specification included the standard section 12 features as mentioned

at the beginning of this part of the guide, and quick release quarter turn

fasteners for the wings, In addition to this hinging facility each fitting can

be designed to be able to be individually isolated for maintenance &

relamping, another an important factor in platform situations.

The reason for ‘quick’ release is simply that maintenance in underg ro u n d

a reas can only be carried out at very limited times & the faster & easier

it is for the maintenance to be completed the better & more cost

e ffective the work.

In addition a reflector in anocoil aluminium was used to provide maximum

e fficiency. In this case the lamps chosen were 2 × 55wPL. The IP rating,

IP65, to ensure that dust, always an issue in platform areas, was kept out of

the fitting. To assist cleaning a special gloss powder finish was selected.

Platform “Public help” points have been successfully highlighted using our

Maxi Callisto (p398) with either CDMT or compact fluorescent lamps, all

section 12 compliant. This angled fitting lends itself to simple installation

on the tunnel curve to highlight the now numerous “help” points.

Refer to page 162 for Camasys lighting and cable management system.


395

Tuscan M10280. IP65

Lamp size

D840/2PL55LM10280 2×55wPLL

D840/2PL40LM10280 2×40wPLL

Additional fittings which can be incorporated within similar cable

management systems.

D850 Tuscan – Standard fitting specification page 158.

D850/26M10280 2×70wT8

D850/16M10280 1×70wT8

D850/25M10280 2×58wT8

D850/15M10280 1×58wT8

D850/24M10280 2×36wT8

D850/14M10280 1×36wT8

D810 T5 Tuscan – Standard fitting specification page 154.

High efficiency Lamp size High output Lamp size

D810/114T5 M10280 1×14w D810/124T5 M10280 1×24w

D810/214T5 M10280 2×14w 2×24w not available

D810/121T5 M10280 1×21w D810/139T5 M10280 1×39w


D810/128T5 M10280 1×28w D810/154T5 M10280 1×54w


D810/135T5 M10280 1×35w D810/149T5 M10280 1×49w


For the addition of self contained emergency facility add suffix 058,

however more often a central battery system is preferred for

underground facilities. Details of this option can be found on page 313.



396

Linear Tuscan M10492 IP65

Based upon Tuscan (p158) type fitting with square sides to the body.

Heavy gauge steel frame housing a toughened glass panel. The frame is

held against gasket by toggle latches which allow hinging of frame for

maintenance & relamping.

An optional louvre, manufactured in aluminium, can be fitted behind the

glass panel.

Standard finish RAL9006 silver.

Without louvre Lamp size With louvre

D850/26M10492 2×70w D850/26M10492A

D850/16M10492 1×70w D850/16M10492A

D850/25M10492 2×58w D850/25M10492A

D850/15M10492 1×58w D850/15M10492A

D850/24M10492 2×36w D850/24M10492A

D850/14M10492 1×36w D850/14M10492A

D840 Tuscan 10492 – (Standard fitting specification page 156.)

Without louvre Lamp size

D840/2PL55LM10492 2×55wPLL

D840/2PL40LM10492 2×40wPLL

D810 T5 Tuscan 10492 – (Standard fitting specification page 154.)


D810/114T5M10492 1×14w D810/124T5M10492 1×24w

D810/214T5M10492 2×14w 2×24w not available

D810/121T5M10492 1×21w D810/139T5M10492 1×39w


D810/128T5M10492 1×28w D810/154T5M10492 1×54w


D810/135T5M10492 1×35w D810/149T5M10492 1×49w


With louvre add suffix A

Additionally to the above any Tuscan fitting can be provided with section

12 modifications, simply specify catalogue number of fitting wanted &

add M8277 (frosted glass) to the chosen number. If clear glass is preferred

add M8277T or for Georgian Wired glass M8277M.

If, in place of toggle latches, security screws are required to secure

diffuser frame add suffix ‘C’. For security screw & louvre suffix ‘D’.

Other Current Section 12compliant fittings

Standard Tuscan(not M10492)


397

Quadrant. IP65

Manufactured to general the specification of Quadrant (p192) but

having section 12 requirements (glass diffuser).

High Frequency

Clear patterned Lamp size

DQ382DLPHFBM8277T 1×38w2D




DQ2PL9LPHFBM8277T 2×9wPL

Semi recessed add suffix V in place of T

Fully recessed add suffix W in place of T

Frosted diffuser, at extra cost, delete T & add suffix X

Photometric data see page 471

A wall mounted angle version, generally as p193, but to section 12 as

right is available - add suffix M2877T to chose Quadrangle number.

Quadring. IP65

Manufactured to general the specification of Quadring (p222) but having

section 12 requirements (glass diffuser).

High Frequency

Clear patterned Lamp size

RB382DLPHFBM8277T 1×38w2D



RB2PL11LPHFBM8277T 2×11wPL

RB2PL9LPHFBM8277T 2×9wPL

Semi recessed add suffix V in place of T

Fully recessed add suffix W in place of T

Frosted diffuser, at extra cost, delete T & add suffix X

Photometric data see page 471

Piccadilly. IP65

Zinc coated steel body finished in textured white powder coat.

High frequency control gear mounted upon removable tray with plug &

socket connector block. Patterned glass diffuser held against gasket by

stainless steel screws.

Manufactured to section 12 requirements.

Lamp size

PIC324PLHFW 3×24wPL

Semi recessed add suffix SR. Fully recessed add suffix R

Photometric data contact our technical sales office – 020.8254.2022

Quadring

Piccadilly Quadrangle

Quadrant



398

Mission IP65

Manufactured to the general specification of Mission (p145) but having

section 12 requirements (glass diffuser).

Please note that at date of going to press London Underground in

general did not sanction the use of T5 lamps. Please seek up to date

information before specifying their use.

T8 Lamps

High frequency Lamp size High output Lamp size

D599/15HF M8277T 1×58w D599/25HF M8277T 2×58w

D599/14HF M8277T 1×36w D599/24HF M8277T 2×36w

D599/12HF M8277T 1×18w D599/22HF M8277T 2×18w

T5 Lamps


D599/114T5M8277T 1×14w D599/124T5 M8277T 1×24w

D599/214T5 M8277T 2×14w D599/224T5 M8277T 2×24w

D599/121T5 M8277T 1×21w D599/139T5 M8277T 1×39w

D599/221T5 M8277T 2×21w D599/239T5 M8277T 2×39w

D599/128T5 M8277T 1×28w D599/154T5 M8277T 1×54w

D599/228T5 M8277T 2×28w D599/254T5 M8277T 2×54w

D599/135T5 M8277T 1×35w D599/149T5 M8277T 1×49w

D599/235T5 M8277T 2×35w D599/249T5 M8277T 2×49w

Maxi Callisto IP65

General specification, as shown on page 256 but each fitting to be

modified to section 12 requirements.

Discharge Lamp size

XCAL70CDMTLM8277U 1×70wCDMT

XCAL35CDMTLM8277U 1×35wCDMT

High frequency Lamp size

XCAL1PLT18LHFM8277U 1×18wPLT

Switch start Lamp size

XCAL1PLT18LM8277U 1×18wPLT

For white finish add suffix W. For Satin Silver finish add suffix C29

For top cable entry add suffix TH

FSRDL IP65

Downlighter range as described on pages 212 to 214 but manufactured

to include section 12 requirements.

Simply select fitting number required & add suffix M8277T.

Maxi Callisto

FSRDL

Mission


399

Callisto IP55

General specification, as shown on page 258 but each fitting to be

modified to section 12 requirements.

Lamp size Lamp angle

MR16–12v

CAL50IRC60M8277U 50w 60deg










For white finish add suffix W

For Satin Silver finish add suffix C29

Semi recessed version add suffix “SR”

L.E.D. versions available see page 127

Supplied with lamps.

Note: As with all Tungsten fittings the external case temperature will

get hot. However the L.E.D. version runs cool.

Quadrato IP65

Cast aluminium body & hood finished in matt black powder coat. High

f requency control gear mounted upon removable tray with plug & socket

connector block. Glass panel held against gasket by stainless steel scre w s .

Manufactured to section 12 requirements.

Surface Lamp size Semi-recessed

QTO1PLC18LM8277U 1×18wPLC QTO1PLC18LSRM8277U

QTO1PLC26LM8277U 1×26wPLC QTO1PLC26LSRM8277U

QTO70SONLM8277U 1×70wSON QTO70SONLSRM8277U

QTO75MALM8277U 1×75wMAL QTO75MALSRM8277U

Photometric data see page 471.

QuadratoCallisto



400

Centaur. IP65

In-ground range as described on page 300 but manufactured to include

section 12 requirements. L.E.D. versions see page 109. Simply select fitting

number required & add suffix M8277U.

Curso IP55

Recessed wall mounting fitting as described on page 259 but

manufactured to include section 12 requirements. L.E.D. versions see

page 127. Simply select fitting number required & add suffix M8277U.

Emergency Exit Signs, self-contained

In conjunction with London Underground engineers two self-contained 3-

hour duration emergency exit units have been developed.

Zinc coated steel body finished in textured white powder coat. Control

gear, batteries & module mounted upon removable tray with plug &

socket connector block. Glass panel within steel frame held against

gasket by stainless steel screws. Manufactured to section 12 requirements.

Maintained. (normal mains operation & emergency operation).

Lamp size

M1977 1×11wPL

Non-Maintained (no light available in normal times, emerg e n c y

operation only).

Lamp size

M1897 1×11wPL

To the above catalogue numbers simply add the correct suffix for chosen

sign.

M3981

M3982

M3983

M3984

Other signs or symbols available upon request.

If fittings are wanted without signage simply specify the catalogue

number but with no additional suffix.

If Auto-test facility on the maintained emergency circuit is required add

suffix M5780 (full details see page 314). This is not available for non-

maintained fittings.

M1977/M3981

Curso

M3982M3981 M3984M3983

Documents

Railway