RA2 Select works with AlexaCreate just the right light using Alexa voice control.

Amazon Echo ShowMain repeater Amazon Echo SpotAmazon Echo

Step 2Plug in your Alexa-enabled device, download the Amazon Alexa app, and connect it to your Wi-Fi network.

Step 3Enable the “Caséta and RA2 Select” skill in the Amazon Alexa app, then say “Alexa, discover my devices.”

What you need• RA2 Select main repeater

• Lutron App

• Alexa-enabled device

• Amazon Alexa app (shown below)

Step 1Install your RA2 Select system, connect it to your Wi-Fi router, and download the Lutron App.

Getting started is easy

lutron.com/ra2selectintegration

Customer AssistanceEmail: support@lutron.com Phone: 1.844.LUTRON1 (588.7661) — includes 24/7 technical support

© 03/2018 Lutron Electronics Co., Inc. I P/N 367-2790 REV A

Caséta and Lutron are trademarks of Lutron Electronics Co., Inc., registered in the U.S. and other countries. RA2 Select is a trademark of Lutron Electronics Co., Inc.

Amazon, Echo, Echo Spot, Echo Show, and all related logos and motion marks are trademarks of Amazon.com, Inc. or its affiliates.