PowerPoint PresentationLinda Reid, RN-BC Oregon State
University
ACHA May 30, 2019
Four Assessment Areas
Elements of Compliance
The written program: Element 1: Addresses the full scope of the
health care services and how they are assessed for quality.
Full scope includes:
Considerations: Sources of ongoing assessment Peer review as
Quality Improvement
Element 4: Identifies the programs purposes Element 5: Identifies
program’s specific objectives Element 8: Evaluate annually for
effectiveness and if program’s purposes and objectives are being
met
Address both the purposes and objectives in the Plan Three-year
plan to match AAAHC cycle Evaluate Annually
Purposes: ~Quality of care, improve patient outcomes ~Student
Learning ~Have a QI Program that is broad-based, active,
integrated, organized, and peer-based
~Program uses evidence based medicine/best practices guide data
collection and evaluation
Element 4: Identifies the programs purposes Element 5: Identifies
program’s specific objectives Element 8: Evaluate annually for
effectiveness and if program’s purposes and objectives are being
met
Objectives vs. Goals Objectives
~External benchmarks using national guidelines, AAAHC, ACHA –
validate quality or find deficits to improve
~Internal Benchmarks ~AAAHC standards ~Integrate peer review
~Reporting ~Risk management ~Education of staff and patients
Goals *Specific studies or peer review planned for the coming year
*Evaluate monthly/document in minutes *Annual Review of Program and
Plan
Element 7: Describe integration of quality improvement, peer
review, risk management, infection prevention and control
Considerations:
Peer review using diagnosis can also be or become a quality
improvement study
Identify risk management issues through incident reports, safety
issues, infection prevention, monitor higher risk processes
Element 9: Describe processes to ensure reporting to governing body
and throughout the organization
Considerations:
Present results of studies and peer review to appropriate staff
following their completion
Use annual report to summarize all activities and program
evaluation to present to governing body
Provide access to annual report to all staff
Quality Improvement Program 5.1.B Ongoing data collection processes
in place to measure quality, identify problems or concerns
Elements of Compliance At a minimum, data collection processes
include:
Element 1: Analysis of peer review results
Considerations: Peer review based on a diagnosis may lead to
further study
Element 2: Periodic audits of critical processes
Considerations:
Identify and evaluate services/events with high risk potential E.g.
anaphylaxis, hospital transfers/911 calls
Element 3: Ongoing monitoring of important processes and outcomes
of care
Considerations:
Element 4: Comparison of performance to internal and external
benchmarks
Considerations: Internal benchmark: Re-study QI from previous year
to
evaluate improvement
External benchmark: AAAHC, ACHA, national standards, literature
review
Element 5: Methods to systematically collect information from other
pertinent sources Element 6: Ongoing evaluation of the information
and data collected to identify unacceptable variation or results
needing improvement
Considerations: Regularly review and evaluate data from incident
reports, peer review results,
health and safety committee input, infection prevention,
satisfaction surveys, NCHA survey, departmental/staff
concerns
I’ll be happy to give you innovative thinking. What are the
guidelines?
Quality Improvement Program 5.1.C Demonstrate that continuous
improvement is occurring by conducting QI studies when data
indicates improvement needed
Elements of Compliance Written descriptions of QI studies document
each of the following elements:
Element 1 – 10: Describes what is needed in a QI Study
Considerations:
Develop a QI Template with guidelines that incorporate these 10
elements
The organization demonstrates that continuous improvement is
occurring by conducting quality improvement studies when the data
collection processes described in Standard 5.I.B indicate that
improvement is or may be warranted.
Elements of compliance
Written descriptions of QI studies document each of the following
elements, as applicable: A statement of the purpose of the QI study
that includes a description of the problem and an explanation
of why it is significant to the organization.15--
Identification of the measurable performance goal against which the
organization will compare its current performance in the area of
study. The goal must be stated in quantitative terms.16--
A description of the data that have been or will be collected to
determine the organization's current performance.--
Evidence of data collection.--
Data analysis that describes findings about the frequency,
severity, and source(s) of the problem(s).--
A comparison of the organization's current performance in the area
of study against the previously identified performance
goal.--
Implementation of corrective action(s) to resolve identified
problem(s).--
Re-measurement (a second round of data collection and analysis as
described in 5.I.C.4-6) to objectively determine whether the
corrective actions have achieved and sustained demonstrable
improvement.--
If the initial corrective action(s) did not achieve and/or sustain
the desired improved performance, implementation of additional
corrective action(s) and continued re-measurement until the problem
is resolved or is no longer relevant.--
As documented in committee and/or staff meeting minutes, and/or in
records of educational activities, the findings of quality
improvement activities are communicated:-- To the governing
body.--
Throughout the organization, as appropriate.
Title of Study:
1. Purpose and Description of Study:
2. Goal of Study:
6. Conclusion:
2. Goal of Study:
6. Conclusion:
Title of Study: How to Fill Out a QI Report Department: Your
department (Nursing, Medical Reception, Lab, etc.) Name: Your name
Date of Study: Dates that the study was performed/data collected
Date Submitted: Date turned in to QI Committee 1. Purpose and
Description of Study:
• Include a statement of the purpose of the QI activity that
includes a description of the known or suspected problem, and
explain why it is significant for SHS.
• This is the assessment of the issue to be studied. • What is the
reason you selected this topic for study? How did you become
aware
of the issue? • Is this a new study or a restudy? • Is this a new
process, a study of high risk or high volume? Is it a problem
prone
area or process? • Has there been any impact on patient outcomes?
If so, how severe and how
often?
2. Goal of Study: • Identify the performance goal against which the
organization will compare its
current performance in the area of study. The performance goal must
be specific, e.g. “90% of time…”, “80% of patients…” etc. What
results will you consider to be satisfactory? Provide a specific
goal,
• If this is an external benchmark study, what professional
guidelines, standards, or organizations are you using to benchmark
your results?
• Is this a restudy where you are comparing results from previous
year(s)? If so, state it is an “internal benchmark”.
3. Study Methods:
• Describe the data that will be collected in order to determine
the current performance.
• Describe the issue in more detail if needed and explain what you
did to look at the problem. Some things to consider:
o Do you have any baseline data? o What information collection
process did you use to study the issue? (e.g.
chart reviews, surveys, etc.) o What were the key indicators you
identified? What criteria did you use?
Was there a data collection tool used? o How many were studied and
for how long? (Charts, patients, data tools,
etc.) o What departments were involved and who is participating in
the study?
4. Findings:
• Include the evidence of data collection. • What did the data
show? What did you find out? • Analyze the data describing findings
about the frequency, severity and source(s)
of the problem(s). • Compare the current performance in the area of
study against the previously
identified performance goal. (#2 above).
QUALITY IMPROVEMENT REPORT
Title of Study: How to Fill Out a QI Report
Department: Your department (Nursing, Medical Reception, Lab,
etc.)
Name: Your name
Date of Study: Dates that the study was performed/data
collected
Date Submitted: Date turned in to QI Committee
1. Purpose and Description of Study:
· Include a statement of the purpose of the QI activity that
includes a description of the known or suspected problem, and
explain why it is significant for SHS.
· This is the assessment of the issue to be studied.
· What is the reason you selected this topic for study? How did you
become aware of the issue?
· Is this a new study or a restudy?
· Is this a new process, a study of high risk or high volume? Is it
a problem prone area or process?
· Has there been any impact on patient outcomes? If so, how severe
and how often?
2. Goal of Study:
· Identify the performance goal against which the organization will
compare its current performance in the area of study. The
performance goal must be specific, e.g. “90% of time…”, “80% of
patients…” etc. What results will you consider to be satisfactory?
Provide a specific goal,
· If this is an external benchmark study, what professional
guidelines, standards, or organizations are you using to benchmark
your results?
· Is this a restudy where you are comparing results from previous
year(s)? If so, state it is an “internal benchmark”.
3. Study Methods:
· Describe the data that will be collected in order to determine
the current performance.
· Describe the issue in more detail if needed and explain what you
did to look at the problem. Some things to consider:
· Do you have any baseline data?
· What information collection process did you use to study the
issue? (e.g. chart reviews, surveys, etc.)
· What were the key indicators you identified? What criteria did
you use? Was there a data collection tool used?
· How many were studied and for how long? (Charts, patients, data
tools, etc.)
· What departments were involved and who is participating in the
study?
4. Findings:
· What did the data show? What did you find out?
· Analyze the data describing findings about the frequency,
severity and source(s) of the problem(s).
· Compare the current performance in the area of study against the
previously identified performance goal. (#2 above).
5. Analysis and Recommendations:
· Describe what corrective actions have been implemented to resolve
identified problem(s), if any.
· This may include new or revised policies or procedures,
education, staffing changes, equipment or supply changes,
environmental changes, or other adjustments.
· How and why did you make these changes?
· Plan for restudying the issue to objectively determine whether
the corrective actions have achieved and sustained demonstrable
improvement.
· Analyze strengths and weaknesses of the study; recommendations to
improve the study process.
· What conclusions can be drawn from the data, and do those result
in any process recommendations/changes?
6. Conclusion:
· Was your goal reached?
· How will you monitor the corrective studies that have been
implemented? Does it need to be restudied? If so, when?
· If this is a restudy, evaluate if the initial corrective action
achieved and/or sustained the desired improved performance. If not,
implementation of additional corrective actions and continued
re-measurement will be needed until the problem is resolved or is
no longer relevant.
· The findings should be communicated to the Direct Reports Team
and throughout SHS, as appropriate.
· Whom do you need to inform and how will you inform them of the
results and/or changes that are necessary?
· The findings should be incorporated into the organization’s
educational activities as needed.
Quality Improvement Program 5.1.D
Elements of Compliance At a minimum, external benchmarking
activities include:
Elements: 1. Performance measures for improving processes or
patient
outcomes
3. Comparing internal performance to external benchmarks
4. Tracking changes in performance
5. Incorporation of benchmark results into other QI
activities
6. Results of benchmarking activities are reported
Considerations:
Use a diagnosis seen frequently or problem-prone. Choose a
performance measure (specific goal), Collect data
Benchmark against current national guidelines CDC, U.S. Preventive
Services Task Force, Evidence-based
medical resource software
Take advantage of AAAHC or ACHA Benchmark Activities (PSAS)
Let results of benchmark spark other Quality Improvement
ideas
Re-study if results do not meet the performance measure to track
improvement
Choose to study what is relevant and important to you and your
organization
Incorporate key recommendations of the Accrediting
organization:
AAAHC = Patient Outcomes, Clinical Care, Administrative, Cost of
Care (studies can cover more than one area)
Have a specific, measureable goal for the study
Have a template with guidelines that include the 10 elements
required in a QI Report
Interventions and Recommendations
“As you can see we have thought carefully about ways of improving
staff productivity.”
Linda Reid Director of Nursing Services Oregon State University
Student Health Services
[email protected]
541-737-5582
Slide Number 2
Slide Number 3
Four Assessment Areas
Elements of Compliance
Element 4: Identifies the programs purposes Element 5: Identifies
program’s specific objectives Element 8: Evaluate annually for
effectiveness and if program’s purposes and objectives are being
met
Element 4: Identifies the programs purposes Element 5: Identifies
program’s specific objectives Element 8: Evaluate annually for
effectiveness and if program’s purposes and objectives are being
met
Element 7: Describe integration of quality improvement, peer
review, risk management, infection prevention and control
Element 9: Describe processes to ensure reporting to governing body
and throughout the organization
Quality Improvement Program5.1.BOngoing data collection processes
in place to measure quality, identify problems or concerns
Element 2: Periodic audits of critical
processesConsiderations:
Element 4: Comparison of performance to internal and external
benchmarks
I’ll be happy to give you innovative thinking. What are the
guidelines?
Quality Improvement Program5.1.CDemonstrate that continuous
improvement is occurring by conducting QI studies when data
indicates improvement needed
Slide Number 17
Slide Number 18
Slide Number 19
Quality Improvement Program
Elements of Compliance
Interventions and Recommendations