PUMA MX series - Syracuse Supply · 2019-07-18 · 02 / Product Preview Basic information Basic Structure Cutting Performance Detailed Information Options Diagrams Speciﬁcations

PUMA MX seriesMulti-tasking Machine

PUMA MX seriesPUMA MX1600PUMA MX2100 PUMA MX2600

02 /

Product Preview

Basic information

Basic Structure

Cutting

Performance

Detailed

Information

Options

Diagrams

Specifications

Customer Support

Service

PUMA MX seriesDoosan brand multi-tasking machine which can be used to carry out turning and milling work on complex parts in the same machine, finally obtaining the finished part. Its perfect combination of lathe and machining centre makes it possible to perform a wide range of simple and complex operations with unprecedented flexibility.

PUMA MX 1600/735

PUMA MX

series

03 02 /

Contents

02 Product Overview

Basic Information

04 Basic Structure

13 Cutting Performance

Detailed Information

14 Standard / Optional Specifications

16 Capacity Diagram

38 Machine / CNC Specifications

42 Customer Support Service

Series SizeMax. turninglength

mm (inch)Standard

modelS-model T-model ST-model

PUMA MX1600/735

6-inch700 (27.6) ◦ ◦ ◦ ◦

PUMA MX1600 900 (35.4) ◦ ◦ ◦ ◦

PUMA MX21008-inch

1020 (40.2) ◦ ◦ ◦ ◦

PUMA MX2100L 1520 (59.8) ◦ ◦ ◦ ◦

PUMA MX2600 10-inch 1540 (60.6) - - ◦ ◦

* Standard model : Left spindle + Tail stock

* S- model : Left spindle + Right spindle

* T-model : Standard model + Lower turret

* ST-model : S-model + Lower turret

04 /

Robust design

Feed Axis

All carriages are mounted on roller-type, linear motion guides to provide high accuracy and rigidity while reducing non-cutting time.

The heavily ribbed torque tube design prevents twisting and deformation. All guide ways are wide wrap-around rectangular type further provide long-term stability and reliable production.

Basic Structure

Finite Element Method (FEM) analysis

results in superior machine stability.

• Zero clearance from preload High permissible

• load Low friction & wear (LM µ = 0.002~0.003)

• Simple maintenance over the long haul

Left Spindle

C1-axis

Lower TurretX2-axis A-axis

C2-axisB-axis

Z1-axis

60°

X1-axis

Milling Spindle

Y-axis Right Spindle

Z2-axis

Heavy-duty, high precision roller type LM guideways

Note1) A-axis is just for right spindle in S/ST model of PUMA MX series.

Note2) X2/Z2-axis is jus for lower turret in T/ST model of PUMA MX sereis.



Axis travel

Rapid traverse

Model Unit PUMA MX1600/735 / MX1600 PUMA MX2100 / MX2100L PUMA MX2600

X1-axis mm (inch) 450 (17.7) 565 (22.2) 630 (24.8)

Z1-axis mm (inch) 735 / 935 (28.9 / 36.8) 1050 / 1550 (41.3 / 61.0) 1585 (62.4)

Y-axis mm (inch) 170(±85) (6.7(±3.3) 230(±115) (9.1(±4.5)

B-axis deg. 240(±120)

A-axis mm (inch) 735 / 935 (28.9 / 36.8) 1050 / 1550 (41.3 / 61.0) 1550 (61.0)

X2-axis mm (inch) 165 (6.5) 187 (7.4) 220 (8.7)

Z2-axis mm (inch) 725 / 925 (28.5 / 36.4) 1050 / 1550 (41.3 / 61.0) 1515 (59.6)

Model Unit PUMA MX1600/735 / MX1600 PUMA MX2100 / MX2100L PUMA MX2600

X1-axis m/min (ipm) 36 (1417.3)

Z1-axis m/min (ipm) 36 (1417.3)

Y-axis m/min (ipm) 26 (1023.6)

B-axis m/min (ipm) 50 (1968.5) 42 (1653.5)

A-axis m/min (ipm) 30 (1181.1)

X2-axis m/min (ipm) 24 (944.9)

Z2-axis m/min (ipm) 36 (1417.3)

PUMA MX

series

Product Preview

Basic information

Basic Structure

Cutting

Performance

Detailed

Information

Options

Diagrams

Specifications

Customer Support

Service

05 04 /

Perfect integration of key axes

Puma MX series provides unmatched flexibility with a wide variety of machine configurations. From simple turning and milling to complex multi-axis simultaneous machining, multiple operations can be completed within a single Puma MX.

Thermal compensation for B-axis

Milling spindle thermal growth can be compensated for spindle axis direction only. Effectively removes positional deviation of spindle nose due to changing rotational speed.

B-axis swivel control

B-axis index that can have swivel positioning of every 0.001˚ in ±120 ˚ performs not only horizontal front face machining but also angular machining.

* This photo is for the major unit combination of ST model

ST model of PUMA MX series has whole controlled axis from 3 spindles(B-axis spindle to Left /Right spindle) with lower turret. Their perfect control combination is key factor to ensure multi-tasking performance.

• Multi-process capability

• Shorter setup times

• Optimal cycle distribution

• Automated operation support

PUMA MX series

Multi-axis control and its combination

Milling spindle headbody

(PT1), bed (PT2)

PT2

Position of temperature sensors

PT1

PUMA MX1600 series

1.6 sec PUMA MX2100/2600 series

2.0 sec B-axis indexing time (in 90°)

Within its swivel ±120 ˚, B-axis can be indexed and braked

precisely at 5° indexing (by coupling clamp)

Swivel and

indexing of B-axis

is by servo motor

and roller gear

cam with high-

rigidity and high-

precision

B-axis milling spindle

Lower turret

Left spindle Right spindle

±120°

06 /

Spindle

Perfect combination of 3 key spindles to ensure machining stability under various cutting conditions.

Left / Right Spindle

Both spindles, left and right, are engineered to minimize the loss of precision through thermal distortion, and to ensure superior performance in applications ranging from heavy-duty cutting at high power and low speed, to fine finishing at high speed.

Perfect C-axis control of both spindles

All C1/C2-axis can do positioning control of every 0.001˚ in 360˚. Left spindle of PUMA MX1600 series can perform

C1-axis positioning control of every 0.0001˚ in 360˚.

Oil cooling unit for left & right spindles

Both the left and right spindles employ an integral

cooling system that circulates coolants through the

entire spindle structure. This eliminates thermal

distortion in all applications from heavy-duty cutting

at high power and low speeds to fine and finish

cutting at high speed.

This photo is PUMA MX1600ST/735

B-axis milling spindle

C2-axis

Right spindleLeft spindle

C&Z-axis cylindrical

interpolation

C&X-axis polar interpolation

R

C

C-axis

Z-axis C-axisZ-axis

Cooling oil

Cooling fin

C1/C2-axis contoruing torque

PUMA MX1600 series

208N·m

(153.5 lbf.ft)

PUMA MX2100 series

318N·m

(125.5 lbf.ft)

PUMA

MX2600 series

700N·m

(516.6 lbf.ft)

C1-axis

PUMA MX

series

Product Preview

Basic information

Basic Structure

Cutting

Performance

Detailed

Information

Options

Diagrams

Specifications

Customer Support

Service

07 06 /

Left/Right Spindle Power-Torque Diagram

PUMA MX1600 Left /Right spindle PUMA MX2100 Left /Right spindle

PUMA MX2600 Left /Right spindle.

Spindle speed : r/min



Pow

er :

kW (H

p)

Pow

er :

kW (H

p)

Pow

er :

kW (H

p)

Torq

ue :

N·m

(ft-

lbs)

Torq

ue :

N·m

(ft-

lbs)

Torq

ue :

N·m

(ft-

lbs)

Max. speed 6000 r/min

Max. power 15 kW (20.1 Hp)

(34.9 Hp)

(29.5 Hp)

Max. power 26 kW

Max. power 22 kW



15 (20.1)

208 (153.5) S3 40%S3 40%

S2 30min

S2 30min

S1 Cont.

S2 30min

S2 30min

S1 Cont.

S3 15%S3 15%

S3 25%

S3 25%

S1 Cont. S1 Cont.

S1 Cont.

S2 30min

S2 30minS1 Cont.

S1 Cont.

157 (115.9)140 (103.3)

700 (516.6) S3 25%S3 25%

S2 30min S2 30min

S2 30min

S1 Cont.S2 30minS1 Cont.

S1 Cont.

S1 Cont.26 (34.9)22 (29.5)

15 (20.1)

539 (397.8)398 (293.7)310 (228.8)268 (197.8)

102 (75.3)

75 (55.4)136 (100.4)162 (119.6)175 (129.2)

238 (175.6)

318 (234.7)

22 (29.5)18.5 (24.8)15 (20.1)

11 (14.8)

11 (14.8)

HighLow

HighLow

HighLow

100 100010

300

10

30

1100 100010

10

500

1

50

100 10001010 1

1000 100

688 1400

6000750

910

300

800 4000360

390

450 1500

5000600 1300

15 (20.1)

208 (153.5) S3 40%S3 40%

S2 30min

S2 30min

S1 Cont.

S2 30min

S2 30min

S1 Cont.

S3 15%S3 15%

S3 25%

S3 25%

S1 Cont. S1 Cont.

S1 Cont.

S2 30min

S2 30minS1 Cont.

S1 Cont.

157 (115.9)140 (103.3)

700 (516.6) S3 25%S3 25%

S2 30min S2 30min

S2 30min

S1 Cont.S2 30minS1 Cont.

S1 Cont.

S1 Cont.26 (34.9)22 (29.5)

15 (20.1)

539 (397.8)398 (293.7)310 (228.8)268 (197.8)

102 (75.3)

75 (55.4)136 (100.4)162 (119.6)175 (129.2)

238 (175.6)

318 (234.7)

22 (29.5)18.5 (24.8)15 (20.1)

11 (14.8)

11 (14.8)

HighLow

HighLow

HighLow

100 100010

300

10

30

1100 100010

10

500

1

50

100 10001010 1

1000 100

688 1400

6000750

910

300

800 4000360

390

450 1500

5000600 1300

08 /

Spindle

Perfect combination of 3 key spindles to ensure machining stability under various cutting conditions.

Product Preview

Basic information

Basic Structure

Cutting

Performance

The 360° angular positioning of the milling spindle

can accommodate multi insert turning tools that are

equipped with two, three, or four inserts.

Milling spindle

Oil-based coolants circulate through the milling spindle, allowing perfect integration of turning and milling applications. An air-gap sensor confirms the clamping status of both tools and parts.

12000 r/min

Milling Spindle

CAPTO C5

CAPTO C6

Tool shank

option 18000 r/min (on PUMA MX1600 series)

option HSK –A63

PUMA MX1600 series

PUMX MX2100/2600 series





Left & Right SpindleSame-size integral motors on left and right spindles deliver enhanced flexibility and performance.

Milling Spindle

Model Unit PUMA MX1600 PUMA MX2100 PUMA MX2600Spindle - Left/Right SpindleStandard chuck inch 6 8 10

Spindle speed r/min 6000 5000 4000

PowerkW

(Hp)High : 15/11 (20.1/14.8)

Low : 15/15/11 (20.1/20.1/14.8)High : 22/18.5 (29.5/24.8)

Low : 15/15/11 (20.1/20.1/14.8)High : 26/22 (34.9/29.5)

Low : 22/22/15 (29.5/29.5/20.1)

Torque N·m

(lbf.ft)

High : 102/75 (75.3/55.4)Low : 208/157/140(153.5/116/103.3)

High : 161/135 (118.8/99.6)Low : 318/239/175

(234.7/176.4/129.2)

High : 310/262 (228.8/193.3)Low : 700/539/398

(516.6/397.8/293.7)

Condition -High: S2 30min/Cont.

Low : S3 40%/S2 30min/Cont.High: S2 30min/S1 cont.

Low : S3 15%/S3 25%/Cont.High: 30min/Cont.

Low : S3 25%/S2 30min/Cont.

Model Unit PUMA MX1600 PUMA MX2100 PUMA MX2600Spindle - Milling spindleTool shank inch CAPTO C5 CAPTO C6

Spindle speed r/min 12000 {18000 } 12000

PowerkW

(Hp)

High : 9/7.5/3.7 (12.1/10.1/4.7)Low : 7.5/7.5/5.5/3.7 (10.1/10.1/7.4/4.7)

High : 18.5/15/11 (24.8/20.1/14.8)Low : 11/11/11/7.5

(14.8/14.8/14.8/10.1)

High : 22/18.5/15 (29.5/24.8/20.1)Low : 18.5/15/10 (24.8/20.1/13.4)

Torque N·m

(lbf-ft)

High : 19.1/14.3/7.1 (14.1/10.6/5.2)Low : 49.4/28.6/21/20(36.5/21.1/15.5/14.8)

High : 29/24/18 (21.4/17.7/13.3)Low : 81/60/46/31

(59.8/44.3/33.9/22.9)

High : 21/18/14 (15.5/13.3/10.3)Low : 118/95/64(87.1/70.1/47.2)

Condition -High : S3 15%/S3 40%/Cont.

Low : S3 10%/S3 25%/ S3 40%/Cont.

High : S2 10min/S2 30 min/Cont.Low : SS 10%/S3 15%/

S3 25%/Cont.

High : S2 15%/S2 40%/Cont.Low : S3 15%/S3 40%/Cont.

Detailed

Information

Options

Diagrams

Specifications

Customer Support

Service

PUMA MX

series

09 08 /

PUMA MX1600 Milling spindle PUMA MX1600 Milling spindle

PUMA MX2100 Milling spindle PUMA MX2600 Milling spindle

HighLow

1450 2500

5000 120001770

4500 HighLow

1450 2500

4500 12000 180001770

5000 15000

HighLow

1750 60002300 12000 HighLow

1500

120004500

100006000

9 (12.1)7.5 (10.1)

49.4 (36.5) 49.4 (36.5)

28.6 (21.1)21 (15.5)20 (14.8)

19.1 (14.1)14.3 (10.6)

21 (15.5)20 (14.8)

19.1 (14.1)14.3 (10.6)

7.07 (5.2)

118 (87.1)96 (70.8)

64 (47.2)

21 (15.5)17.7 (13.1)14.3 (10.6)

S3 15%

S3 10%

S3 10%

S3 25%

S3 25%

S3 15%S3 40%

S3 40%

S3 40%

S1 Cont.Cont.

S3 10% S3 25%

S3 15%S3 40%S3 40%

S3 40%

S1 Cont.

Cont.

S2 30min

S2 10minS1 Cont.

S1 Cont.

S2 15minS3 15%

S3 25%

S3 15%S2 25%

S3 15%

S1 Cont.

S2 10min

S2 15minS2 30minS1 Cont.

S2 30minS2 10min

S2 30min

S2 15minCont.

S1 Cont.

S1 Cont.

S1 Cont.

S3 40%

S3 10%

15%

S3 25%S3 40% Cont.

28.6 (21.1)

7.07 (5.2)

60 (44.3)45.7 (33.7)31.1 (23.0)

21 (15.5)17.7 (13.1)14.3 (10.6)

5.5 (7.4)

3.7 (5.0)

18.5 (24.8)

7.5 (10.1)

15 (20.1)11 (14.8)

9 (12.1)7.5 (10.1)5.5 (7.4)5 (6.7)

3.7 (5.0)4.7 (6.3)

2.8 (3.8)

22 (29.5)18.5 (24.8)18 (24.1)15 (20.1)10 (13.4)

1

S3 40% Cont.

15%

Cont.

100 1000 2000 40001 0.1

30300

100 1000 10000.1 0.11

1001

100 10 100 10

100 1000 40001

200 20

0.1

Milling Spindle Power-Torque Diagram


Spindle speed : r/min Spindle speed : r/min


Pow

er :

kW (H

p)

Pow

er :

kW (H

p)

Pow

er :

kW (H

p)

Pow

er :

kW (H

p)

Torq

ue :

N·m

(ft-

lbs)

Torq

ue :

N·m

(ft-

lbs)

Torq

ue :

N·m

(ft-

lbs)

Torq

ue :

N·m

(ft-

lbs)


Max. power 9 kW


Max. power 9 kW(12.1 Hp) (12.1 Hp)


Max. power 18.5 kW


Max. power 22 kW(24.8 Hp) (29.5 Hp)

10 /

Tailstock

Lower Turret

More easier and faster set-up of the tailstockusing M-code programby servo motor and ball screw

Strong and rigid lower turret in multi-tasking is to provide more powerful manufacturing performance and a variety of new applications

Product Preview

Basic information

Basic Structure

Cutting

Performance

Servo driven tailstock

Servo tailstock make part set-up faster and easier. The operator inputs the proper M-code information in the control and tailstocks move to its proper positions automatically by linear motion control of servo motor and ball screw. No manual adjustments are required.

Servo driven Lower turret on T/ST model

Turret rotation, acceleration and deceleration are controlled by a high-torque servo motor. Unclamp and rotation are virtually simultaneous. The fast index response keeps cycle times short.

Lower turret T/ST series

Lower turret

Tool number

PUMA MX1600/735

PUMA MX1600

PUMA MX2100

PUMA MX2600

For Turning

DI base - 8 station

8 Standard - - -

DI base - 12 station

12 - - -

For Turn-milling

BMT 45P - 16 station

16 Standard - -


12 - - Standard -24


12 - - - Standard

Lower turret selections to match user applications

Lower turret for a variety of new applications

* This photo is BMT55P with 12-station on PUMA MX2100ST

PUMA MX1600/2100/2600 T/ST series - Rotary tool spindle speed : 6000/5000/4000 r/min

Lower turret of PUMA MX series can be available as

tailstock function by inserting tail center into tool

holder to support light weighted long shaft cutting.

Case1) Guide Bush*

Lower turret to support small and thin parts for

biomedical complex shaped using guide bush

Fixed guide bush

Bar dia. ø22mm~ø42mm

(ø0.9inch~ø1.7inch)

Case2) Lower turret to support long parts with tail center application

* : PUMA MX1600T / ST

ModelTailstock travel

mm (inch)Max. quill thrust force

kN(lbs)Tailstock center

PUMA MX1600/735 / MX1600 735 / 935 (28.9 / 36.8) 3.5 (786.8)Built-in dead center MT#4

PUMA MX2100/L 1050 / 1550 (41.3 / 61) 7 (1573.6)

PUMA MX2600T 1550 (61) 10 (22480) Built-in dead center MT#5

Rotar

Bar ø21 mm

Bar ø42 mm

(0.8 inch)

(1.7 inch)

Rotary guide bush

Fixed guide bush

Detailed

Information

Options

Diagrams

Specifications

Customer Support

Service

PUMA MX

series

11 10 /

PUMA MX1600 Rotary tool spindle PUMA MX2100 Rotary tool spindle

PUMA MX2600 Rotary tool spindle

100 10001

50

0.1100 1000

1

60

0.1

6

7 (5.2)

23.5 (17.3)

47 (34.7)

14 (10.3) S1 Cont.

S3 25%

S1 Cont.

S3 25%

7.8 (10.5)7.7kW (10.3 Hp)

6.8 (9.1)

4.5 (6.0)24.3 (17.9)

21.6 (15.9)18.5 (13.7)

14.3 (10.6)

Cont.5min rating

(5min rating)

10min rating 30min rating

Cont.

S3 25%

S1 Cont.

S3 25%

5.5 (7.4)

1.1 (1.5)

5.5 (7.4)

1.1 (1.5)

S1 Cont.

30min rating

10min rating

1500 2230 50001500 2230 5000 6000

0 1000 2000 3000 4000

3000 min-1 specification4000 min-1 specification

Rotary Tool Spindle Power-Torque Diagram


Rotary Tool Spindle Speed (min-1)


Pow

er :

kW (H

p)

Pow

er :

kW (H

p)

Pow

er :

kW (H

p)

Torq

ue :

N·m

(ft-

lbs)

Torq

ue :

N·m

(ft-

lbs)

Torq

ue :

N·m

(ft-

lbs)


Max. power 5.5 kW


Max. power 7.8 kW


Max. power 5.5 kW(7.4 Hp)

(10.5 Hp)

(7.4 Hp)

12 /

Automatic Tool Changer

Servo ATC and Servo tool magazine ensuring fast and reliable tool indexing.

Product Preview

Basic information

Basic Structure

Cutting

Performance

Servo driven ATC & Tool magazine

The tool magazine can be increased up to 80 tools(except PUMA MX1600/735 series). Tools are selected by a fixed address method that follows the shorter path.

Machine Airbag Function

Machine airbag function minimizes damage in the event of a machine collision, defect or heavy load by detecting sudden axis load increase.

Tool storage

40 tools

Model Unit PUMA MX1600 PUMA MX2100 PUMA MX2600

Max. tool length (from gauge line) mm (inch) 200 (7.9) 300 (11.8) 400 (15.8)

Max. tool weight kg (lb) 4 (8.8) 9 (19.8) 10 (22.0)

Max. tool diameter (continuous) mm (inch) 70 (2.8) 90 (3.5) 90 (3.5)

Max. tool diameter(adjacent pots are empty)

mm (inch) 95 (3.7) 120 (4.7) 130 (5.1)

Max. tool moment N·m (ft-lbs) 3.9 (2.9) 8.2 (6.1) 9.8 (7.2)

Safety design to decrease collision-caused damage

• It is available on the servo axis (X, Z, B, Y-AXIS).• This function can not prevent collision but can minimize collision damege.

The principle of Machine-airbag Function

1. Higher torque load can be detected than setting vale if machine come into collision.2. Servo Unit automatically move in the reverse direction instaneously.

Protect the machine unit

Machine collision,

defection or cutter damage

DAMAGE to the machine Minimize the DAMAGE

Machine-airbag

function

Caused large load torque

Crash

Machine Airbag

Detect the torque data

Minimizethe damage

Instaneous reversedirection moving

Machine collision

80Tools (except

PUMA MX1600/735 series)

Detailed

Information

Options

Diagrams

Specifications

Customer Support

Service

PUMA MX

series

13 12 /

Simultaneous machining

Simultaneous machining can be executed by milling spindle and lower turret. This is effective for automated operation when using gantry loader or robot.

Balance cutting

Both milling spindle and lower turret can do the balance cutting to save machining time and high accuracy when machining small diameter shaft.

Improved productivity

Powerful Machining

PUM MX series is ideal for heavy and interrupted cutting and also your productivity by machining your part with fewer set-ups, shorter changeover and lead time.

Various application and performance

• Workpiece material, KS (JIS) : SM45C (S45C), Carbon steel

• The cutting test results indicated above are obtained as an example through real test cutting.

• The results, indicated in this catalogue are provides as example. They may not be obtained due to differences in cutting conditions

and environmental conditions during measurement.

OD (Heavy duty cutting)

Unit PUMA MX2600

Spindle speed r/min 910

Cutting speed m/min (ipm) 200 (7874)

Feedrate m/rev 0.4

Cutting depth mm (inch) 10 (0.4)

Material removal rate cm3/min (inch3/min) 800 (315.0)

Face milling (Milling 1)

Unit PUMA MX2600

Milling Spindle speed r/min 1100

Tool [6Z] mm (inch) Ø80 (3.2)

Feedrate m/rev 5 (0.2)

Cutting depth mm (inch) 1.0


End milling (Milling 2)

Unit PUMA MX2600


Tool [6Z] mm (inch) Ø25 (1.0)

Feedrate m/rev 25 (1.0)

Cutting depth mm (inch) 0.5


Drilling (Milling 3)

Unit PUMA MX2100


Tool [U-drill] mm (inch) Ø40 (3.2) [6Z]

Feedrate m/rev 0.2


14 /

Standard / Optional Specifications● Standard ◦ Optional X Not applicable

No. Division ApplicationsPUMA

MX1600/735

PUMAMX1600

PUMAMX2100

PUMAMX2600

1

Tool shank

CAPTO C5 ● ● X X

2 CAPTO C6 X X ● ●

3 HSK-A63 X X ○ ○

4Tool magazine

40 tools ● ● ● ●

5 80 tools X ○ ○ ○

6

Work holding device

Left spindle

No chuck ○ ○ ○ ○

7 Hydraulic chuck (6") ● ● X X

8 Hydraulic chuck (8") X X ● X

9 Hydraulic chuck (10") X X order base ●

10 Hardened&Ground hard jaw ○ ○ ○ ○

11 Soft jaw ○ ○ ○ ○

12 Dual pressure chucking ○ ○ ○ ○

13 Chuck clamp confirmation ○ ○ ○ ○

14 Chuck pressure check switch ○ ○ ○ ○

15

Rightspindle(S/ST model)

Hydraulic chuck (6") ● ● X X

16 Hydraulic chuck (8") X X ● X

17 Hydraulic chuck (10") X X order base ●

18 Hardened&Ground hard jaw ○ ○ ○ ○

19 Soft jaw ○ ○ ○ ○

20 Dual pressure chucking ○ ○ ○ ○

21 Chuck clamp confirmation ○ ○ ○ ○

22 Chuck pressure check switch ○ ○ ○ ○

23

Lower turret(T/ST model)

Lower turret for turning (8-station) ● X X X

24 Lower turret for turning (12-station) X X X ○

25 Lower turret for turn-milling (12-station) X X●

BMT55P●

BMT65P

26 Lower turret for turn-milling (16-station)○

BMT45P●

BMT45PX X

27 Lower turret for turn-milling (24-station) X X○

BMT55PX

28 Tail center on lower turret ○ ○ ○ ○

29 Inner shaft hyd. Supply for Steady rest or guide bush ○ ○ X X

30 Steady rest (SLU3.1) ○ ○ ○ ○

31 Semi steady rest (Holder type) X X ○ ○

32 Fiexed type guide bush (Turn-Mill turret only) ○ ○ X X

33

Servo driven steady rest(Z movement)

Select one among SLU3.0 to SLU5.0 X X○

(only MX2100L/LS)

X

34 Select one among SLU3.1 to SLU5.0 X X X○

(only MX2100L/LS)

35

Servo driven steady rest(X/Z movement)

Select one among SLU3.0 to SLU5.0 X X○

(only MX2100L/LS)

X

36 Select one among SLU3.1 to SLU5.0 X X X○

(except T/ST model)PUMA MX

series

Product Preview

Basic information

Basic Structure

Cutting

Performance

Detailed

Information

Options

Diagrams

Specifications

Customer Support

Service

15 14 /

● Standard ◦ Optional X Not applicable

No. Division ApplicationsPUMA

MX1600/735

PUMAMX1600

PUMAMX2100

PUMAMX2600

37

Coolant

T-T-C(Through Tool coolant for Milling spindle)

Pressure 1.0MPa(145 psi)/bag filter ● ● ● ●

38 Pressure 2.0MPa(290 psi)/cyclone bag filter ○ ○ ○ ○

39 Pressure 7.0MPa(1015 psi)/dual bag filter ○ ○ ○ ○

40 Pressure 7.0MPa(1015 psi)/paper filter ○ ○ ○ ○

41 MQL(Minimum quantity lubrication) system ○ ○ ○ ○

42

For Lower turret (T/ST model)

Pressure 0.45MPa(65.3 psi)/Tank screen filter ● ● ● ●

43 Pressure 0.7MPa(101.5 psi)/Tank screen filter ○ ○ ○ ○

44 Pressure 1.0MPa(145 psi)/Tank screen filter ○ ○ ○ ○

45 Pressure 1.45MPa(210.3 psi)/Tank screen filter ○ ○ ○ ○

46 For flushing and others Pressure 0.45MPa(65.3 psi)/Tank screen filter ● ● ● ●

47 Coolant chiller(temperature control)* ○ ○ ○ ○

48 Oil skimmer ○ ○ ○ ○

49 Coolant pressure switch ○ ○ ○ ○

50 Coolant level switch : Sensing level - Low ○ ○ ○ ○

51

Chip disposal

Chip conveyor (Right disposal)

Hinged belt type for steel ○ ○ ○ ○

52 Magnetic scraper type for casting ○ ○ ○ ○

53 Special conveyor order made order made order made order made

54 Chip bucket ○ ○ ○ ○

55 Air blower (for Left or Right spindle chuck) ● ● ● ●

56 Chuck coolant (for Left or Right spindle chuck) ○ ○ ○ ○

57 Through spindle coolant (Left or Right spindle) ○ ○ ○ ○

58 Through spindle air (Left or Right spindle) ○ ○ ○ ○

59 Coolant gun ○ ○ ○ ○

60 Mist collector (Interface only or Integrated) ○ ○ ○ ○

61

High accuracy

Thermal compensation of X1-axis for B-axis spindle ● ● ● ●

62 Linear scale feed back (X1-axis) ○ ○ ○ ○

63 Linear scale feed back (Y-axis) ○ ○ ○ ○

64 Linear scale feed back (Z1-axis) ○ ○ ○ ○

65 Linear scale feed back (X2-axis of Lower turret in T/ST model) ○ ○ ○ ○

66

Measurement

Manual tool setter (Left/ Renishaw) X X X X

67 Auto tool setter (Left/ Renishaw) ○ ○ ○ ○

68 Portable tool setter (Right/Renishaw) X X X X

69 Auto workpiece measurement (RMP60) ○ ○ ○ ○

70

Automation

Parts unloader and conveyor ○ ○ ○ ○

71 Workpiece ejector (for right spindle) ○ ○ ○ ○

72 Bar feeder interface ○ ○ ○ ○

73 Automatic front door (with safety device) ○ ○ ○ ○

74

Others

Air gun ○ ○ ○ ○

75 Automatic power off ○ ○ ○ ○

76 Doosan tool monitoring system ● ● ● ●

77 Rotary type window wiper ○ ○ ○ ○

78 Signal tower ● ● ● ●

79 Workpiece cutoff confirmation (Electrical type) ● ● ● ●

80 Quick change tooling(CAPTO) ** ○ ○ ○ ○

* When using oil-based coolant, fire prevention measures must be prepared. We recommend you to use Coolant chiller to do heat control of coonat pump. ** Lower turret Applicable

16 /

Top View

Front view

External Dimensions

PUMA MX1600 / MX2100 series (40 tools)

A B C D E F G H I J

PUMA MX1600/735 series2900

(114.2)400(1.7)

4365(171.9)

2774(109.2)

1090(42.9)

2681(105.5)

3768(148.3) 345

(13.6)742

(29.2)

1265(49.8)

PUMA MX1600 series3300

(129.9)522

(20.6)4746

(186.9)2764

(108.8)1018(40.1)

2531(99.6)

3618(142.4)

1255(49.4)


(153.2)957

(37.3)5386

(212.1)2805

(110.4)1071(42.2)

2525(99.4)

3660(144.1)

405(15.9)

730(28.7)

1245(49.0)

Product Preview

Basic information

Basic Structure

Cutting

Performance

Unit : mm (inch)

A B

C

J

E

D

IF

G

H

Detailed

Information

Options

Diagrams

Specifications

Customer Support

Service

* Some peripheral equipment can be placed in other places

PUMA MX

series

17 16 /

PUMA MX1600 / MX2100 series (80 tools)

Top View

Front view

Unit : mm (inch)

A B C D E F G H I J K


(129.9)522

(20.6)4765

(187.6)2646

(104.2)*1080(42.5)

2521(99.3)

4054(159.6)

401(15.8)

1132(44.6)

1255(49.4)

562.6(22.1)


(153.1)957

(37.7)5386

(212.1)2805

(110.4)1071(42.2)

2525(99.4)

4045(159.3)

405(15.9)

1115(43.9)

1245(49.0)

146(5.8)

* Up to top of the 80 tool magazine

HF

C

542 (21.3) (in case of PUMA MX1600 with 80tool magazine)

K

IG

BA

E

J

D

C


18 /

External Dimensions

PUMA MX2100L / MX2600 series (40 tools)

Top View

Unit : mm (inch)

Front view

A B C D E F G H I J

PUMA MX2100L series4969

(195.6)975

(38.4)6458

(254.3)2805

(110.4)1072(42.2)

2490(98.0)

3625(142.7)

405(15.9)

730(28.7)

1245(49.0)


(201.8)945

(37.2)6647

(261.7)3011

(118.6)1200(47.2)

2682(105.6)

3762(148.1)

392(15.4)

688(27.1)

1265(49.8)

J

IF

GH

D

A B

C

E

Product Preview

Basic information

Basic Structure

Cutting

Performance

Detailed

Information

Options

Diagrams

Specifications

Customer Support

Service


PUMA MX

series

19 18 /

PUMA MX2100L / MX2600 series (80 tools)

Top View

Unit : mm (inch)

A B C D E F G H I J

PUMA MX2100L series4969

(195.6)975

(38.4)6458

(254.3)2965

(116.3)*1072(42.2)

3742(147.3)

4689(185.6)

405(15.9)

542(21.3)

1245(49.0)


(201.8)945

(37.2)6690

(263.4)3025

(119.1)1200(47.2)

3825(150.6)

4710(185.4)

393(15.5)

492(19.4)

1265(49.8)

* Up to top of the 80 tool magazine

Front viewF

HG

I

BA

J

C

ED


20 /

Tooling System

Lower turret of PUMA MX1600/735 and MX1600 series (T/ST model)Unit : mm (inch)

TURNING TOOL

ID HOLDER

ROTARY TOOL

PLUG

GUIDE BUSH

OD, FACE, CUT-OFF□20(□0.75)

Ø32 (Ø1.3)

16st turret 2)

BMT 45P

OD Tool Holder

Straight Milling HeadFor Side Cutting

AngularMilling HeadFor Face Cutting

Dummy Plug

Fixed Guide Bush

Double OD Tool Holder

Face Tool Holder

Cut-off Tool Holder

ID Tool Holder

OD Tool

Cut-off tool

Boring Bar Sleeves

Ø10 (Ø0.4) Ø12 (Ø0.5)Ø16 (Ø0.6) Ø20 (Ø0.8)Ø25 (Ø1.0) Boring Bar

U-Drill

Drill

U-drill Sleeves

Ø20 (Ø0.8)Ø25 (Ø1.0)

Drill Socket

MT NO.1 MT NO.2MT NO.3

U-Drill Cap

ColletAdapter

Milling Arbor Adapter

Weldon Adapter

COLLET

8st turret 1)

Turning turret

[ER20]Ø2~Ø13(Ø0.1~Ø0.5)

Ø16(Ø0.6)

1) Standard for T/ST model of MX1600/735

2) Standard for T/ST model of MX1600 and Option for T/ST model of MX1600/735PUMA MX

series

Product Preview

Basic information

Basic Structure

Cutting

Performance

Detailed

Information

Options

Diagrams

Specifications

Customer Support

Service

21 20 /

Tool Interference Diagram of Lower Turret

For Turning (8 Stations)

For Turn-Milling (16 Stations, BMT45P)

PUMA MX1600T/735, PUMA MX1600ST/735

PUMA MX1600T/ST

PUMA MX1600T/735 , PUMA MX1600ST/735

Unit : mm (inch)

Unit : mm (inch)

27(1.1)138 (5.4)

30(1.2)

60(2.4)

165 (6.5) (X2-axis travel)

192 (7.6)192 (7.6)90 (3.5) 90 (3.5)

Ø185 (7.3)Ø158 (6.2)

Ø32 (1.3)

Ø170 (6.7)Ø276 (10.9) (Lower turret;Max. turning dia)

Ø170 (6.7)

Ø198 (7.8)

Ø158 (6.2) Ø178 (7.0)

65

(2.6

)

85(3

.3)

Ø32 (1.3) Ø605 (23.8) (Max. swing dia)

SPINDLE CENTER

Ø250 (9.8)

Ø250 (9.8)

Ø250 (9.8)

Ø32 (1.3)

100(3.9)

177(7.0)

177(7.0)

103(4.1)

73(2.9)

30(1.2)

138(5.4)

27(1.1)

165 (X2-axis travel)(6.5)

SPINDLE CENTER

Ø276 (10.9) (Lower turret;Max. turning dia)

Ø608 (23.9) (Max. swing dia)

22 /

Tooling System

Lower turret of PUMA MX2100/2600 series (T/ST model)Unit : mm (inch)

Note) PUMA MX2100T/ST series can have 24 tools on BMT55P by adding special Double OD and Triple ID tool holders. Tool indexing angle will be

controlled by every 15 degree. This application is available as option.

12st Turret

TURNING TOOL

ID HOLDER

ROTARY TOOL

PLUG

OD, FACE, CUT-OFF

OD Tool Holder

OD Tool

Cut-off tool

Boring Bar Sleeves

Boring Bar

U-Drill

Drill

U-drill Sleeves

Drill Socket

Straight Milling Head For Side Cutting

Holder Coverfor U-Drill

Collet Adapter

Milling Arbor Adapter

Weldon Adapter

[ER25]Ø3~Ø16(Ø0.12~Ø0.63)[ER32]Ø3~Ø20(Ø0.12~Ø0.8)

Angular Milling Head For Face Cutting

Dummy Plug

Double OD Tool Holder

Face Tool Holder

Cut-off Tool Holder

ID Tool Holder

BMT 55PBMT 65P

PUMA MX 2100

PUMA MX 2600

Ø10(Ø0.4) Ø12(Ø0.5)Ø16(Ø0.6) Ø20(Ø0.8)Ø25(Ø1.0) Ø32(Ø1.3)

Ø20(Ø0.8)Ø25(Ø1.0)Ø32(Ø1.3)

MT NO.1MT NO.2MT NO.3

COLLET

Ø16(Ø0.6)Ø20(Ø0.8)

□25(□1.0)

Ø40(Ø1.6)

PUMA MX

series

Product Preview

Basic information

Basic Structure

Cutting

Performance

Detailed

Information

Options

Diagrams

Specifications

Customer Support

Service

23 22 /

Tool Interference Diagram of Lower Turret



PUMA MX2100T/LT/ST/LST

PUMA MX2600T/ST

Unit : mm (inch)

Unit : mm (inch)

(X2-axis travel)

Ø254(10.0)

Ø266(10.5)

Ø376 (14.8)102(4.0)

95

(3.7

)

Ø266 (10.5)

Ø250

(9.8)

100(3.9) 182.5(7.2)

Ø20(0.8)

128

(5.0

)Ø

177.

5(7

.0)

58(2

.3)

Ø672 (26.5) (Max. swing dia)Ø20 (0.8) (Max. end mill dia)

Ø40 (1.6) (Max. boring bar dia)

(Lower turret;Max. turning dia)

182.5(7.2)

182.5(7.2)

32(1.3)

188(7.4)

220 (8.7)

40(1.6)

90(3.5)

(X2-axis travel)

Max

. Ø16

(0.6

)

Ø217 (8.5)

Ø40(1.6)

Ø178(7.0)

102

(4.0)

72(2.8) 58(2.3)

Ø280(11.0)

Ø241 (9.5)

Ø217 (8.5)

150(5.9)187 (7.4)120

(4.7)165(6.5)

165(6.5)

85

100(3.9)

37(1.5)

40(1.6)

80(3.2)

100

(3.9)

Ø300 (11.8)

Ø592 (23.3) (Max. swing dia)

(Lower turret;Max. turning dia)

24 /

Tooling System

Milling Spindle of PUMA MX1600/2100/2600 seriesUnit : mm (inch)

• All holders are not supplied. It is only reference for you.

The adapters, in longand short version,make it possible toextend the total length.

Rotating Tools

Turning Tools

CoroMill milling cutters withCoromant Capto coupling

CoroMill milling cutters and adapters

Indexable insert drills with Coromant Capto coupling

Indexable insert drills and adapters

Boring tools with Coromant Capto coupling

45° Coromant Capto cutting units for turning

90° Coromant Capto cutting units for turning,threading parting and grooving

Standard shank tools and adapters for turning, threading parting

and grooving

Coromant Capto cutting units for turning,threading

Boring bars and adapters

Three tools in one:one position in the magazine containning

three standard shank tools.

Modular tooling system570-cutting heads for turning, threading,parting and grooving and boring bars in

different designs

Special tools andengineered products

Multi-function type, suitable for both rotary and fixed tool cutting in milling and lathe

Blanks to be shapedaccording to your needs

CoroMill modular cutting heads and a variety of

shanks

Endmills, shart hole drills and taps with a large

number of adapter

PUMA MX1600: CAPTO C5

PUMA MX2100/2600: CAPTO C6

PUMA MX

series

Product Preview

Basic information

Basic Structure

Cutting

Performance

Detailed

Information

Options

Diagrams

Specifications

Customer Support

Service

25 24 /

PUMA MX1600/735 series, PUMA MX1600 series

PUMA MX2100 series

PUMA MX2600 series

Unit : mm (inch)

Unit : mm (inch)

Unit : mm (inch)

Working Range of B-axis and Y-axis

Y-axis working range

Y-axis working range B-axis rotating range

Y-axis working range

174.5

(6.9)

324.5 (12.8)


125.5

(4.9)

(Gauge Line)

49.07(1.9) 49.07(1.9)

49.07(1.9) 49.07(1.9)

400 (15.7)50 (2.0)

99.07 (3.9)

49.07

(1.9)


85 (3.4)12

0°85 (3.4)

170

(6.7)

330

(13.0)

235(9.3)100(3.9)

210(8.3)

545 (21.5)

170 (6.7)

(Y-axis travel)

170 (6.7)

(Y-axis travel)

85(3.3)

85(3.3)

85(3.3)

85(3.3)

100(3.9)

20 (0.8)

85 (3.4)

85 (3.4)

170 (6.7)

(Y-axis travel)

Spindle Center

Spindle Center

Spindle Center

115 (4.5) 115

(4.5)

230 (9.1

)

120°

30°

90°90°

30°

330

(13.0)

115 (4.5)

230 (9.1)115 (4.5)

270

(10.6)100(3.9)

240(9.5)

610 (24.0)20 (0.8)

26 /

Working Range

PUMA MX1600/735 series

PUMA MX1600/735, PUMA MX1600T/735 PUMA MX1600S/735, PUMA MX1600ST/735

(Lower turret for turning with 8 stations) (Lower turret for turning with 8 stations)

Unit : mm (inch)

Z1-Ref. Point

Z2-Ref. Point

A-Ref. Point

18K MILLING SPINDLE(Option)

Lower Turret(T model only)

Interference Area (Ref. Note)

357.5 [416.5] (14.1 [16.4])

Spindle CL

140(5.5)

725 (28.5) (Z2-axis travel)

240(9.4)

20(0.8)

125(4.9)

35(1.4)

24 (0.9)

343 [293] (13.5 [11.5])123.5 (4.9)147.5 (5.8)

116 (

4.6)

60 (2

.4)

105

(4.1

)

420

(16.

5)10

0(3

.9)

177

(7.0

)

229

(9.0

)

400

(15.

7)

450

(X1-

axis

trav

el)

224.

5

80 (3.1)

20 (0.8)

30 (1.2)

60 (2.4)

259.

5(1

0.2)

975 (38.4)

Z1-Ref. Point

Z2-Ref. Point407 [457] (16.0 [18.0])

A-Ref. Point

8(0.3) 123.5 (4.9)

735 (28.9) (A-axis travel)


Lower Turret(T/ST model only)


357.5 [416.5] (14.1 [16.4])

515 (20.3)

Spindle CL

122(4.8)


220 (8.7)

140(5.5)


240 (9.4)20(0.8)

125(4.9)

35(1.4)

7

313 [263] (12.3 [10.4])123.5 (4.9)240 (9.4)

116 (

4.6)

ø175

(6.9

)

60 (2.4)

105

(4.1)

100

(3.9

)17

7(7

.0)

229

(9.0

)

450 (

17.7)

(X1-a

xis tra

vel)

224.

5 (8

.8)

80 (3.1

)20 (0.8

)30 (1.2

)60

.5(2

.4)

259.

5(1

0.2)

118(4.6)

975 (38.4)122(4.8)

735 (28.9) (Z1-axis travel)365.5 (14.4) (Z1-Ref. Point)

Z1-Ref. Point

Z2-Ref. Point407 [457] (16.0 [18.0])

A-Ref. Point

8(0.3) 123.5 (4.9)



Lower Turret(T/ST model only)


357.5 (14.1)

515 (20.3)

Spindle CL

122(4.8)


220 (8.7)

130(5.1)


240(9.4)

20(0.8)

125(4.9)

35(1.4)

7

313 [263] (12.3 [10.4])123.5 (4.9)240 (9.4)

116 (

4.6)

ø175

(6.9

)

60

105 (

4.1)

65 (2.6

)19

2(7

.6)

229

(9.0

)

450

(17.

7) (X

1-ax

is tra

vel)

224.

5 (8

.8)

80 (3.1

)20 (0.8

)30 (1.2

)60

.5(2

.4)

259.

5(1

0.2)

118(4.6)

174.

5(6

.9)

725 (28.5) (Z2-axis travel)130(5.1)

357.5 [416.5] (14.1 [16.4])

A-Ref. Point

987 (38.9)122(4.8)


Z1-Ref. Point

130(5.1)

Lower Turret(T model only)


515 (20.3)

Spindle CL

122(4.8)


220 (8.7)

55 (2.2

)

85

(3.3

)

170

(6.7

) (Y

-axi

s tra

vel)

85

(3.3

)30 (1.2

)

55 (2.2

)

85

(3.3

)

170

(6.7

) (Y-

axis

trav

el)

85

(3.3

)30 (1.2

)

515 (20.3)

122(4.8)


220 (8.7)

55 (2.2

)

85

(3.3

)

170

(6.7

) (Y

-axi

s tra

vel)

85

(3.3

)30 (1.2

)

55 (2.2

)

85

(3.3

)

170

(6.7

) (Y

-axi

s tra

vel)

85

(3.3

)30 (1.2

)

Z2-Ref. Point407 [457] (16.0 [18.0]) 9

(0.4)104.5 (4.1)



120(4.7)

240(9.4)

20(0.8)

125(4.9)

35(1.4)

24 (0.9)

343 [293] (13.5 [11.5])123.5 (4.9)147.5 (5.8)

140(5.5)

65(2.6)

25(1.0)

10 (0.4

)

174.

5(6

.9)

120(4.7)

140(5.5)

65(2.6)

25(1.0)

10 (0.4

)

174.

5(6

.9)

120(4.7)

140(5.5)

65(2.6)

25(1.0)

10 (0.4

)

174.

5(6

.9)

120(4.7)

140(5.5)

65(2.6)

25(1.0)

10 (0.4

)

116 (

4.6)

60

105

420

(16.

5)65 (2.6

)19

2 (7

.6)

229

(9.0

)

400

(15.

7)

450

(17.

7) (X

1-ax

is tr

avel

)22

4.5

(8.8

)

80 (3.1)

20 (0.8)

30 (1.2)

60.5

(2.4)

259.

5(1

0.2)

6" Chuck

6" Chuck 6" Chuck

6" Chuck

987 (38.9)122(4.8)


122(4.8)


130(5.1)

407 [457] (16.0 [18.0]) 9(0.4)

104.5 (4.1)735 (28.9) (A-axis travel)

PUMA MX1600T/735

(Lower turret for turn-milling with 16 stations) (Lower turret for turn-milling with 16 stations)

PUMA MX1600ST/735

PUMA MX

series

Product Preview

Basic information

Basic Structure

Cutting

Performance

Detailed

Information

Options

Diagrams

Specifications

Customer Support

Service

27 26 /

122(4.8)

935 (36.8) (Z1-axis travel) 130(5.1)465.5 (18.3) (Z1-Ref. Point)

10 (0.4

)

400

(15.

7)

636.5 (25.1) 407 (16.0) 39(1.5)

35(1.4)

60 (2.4

)

60(2.4)

35 (1

.4)

104.5(4.1)


1187 (46.7)

174.

5 (6

.9)

147.5 (5.8)

85(3

.3)

85(3

.3)

170

(6.7

) (Y

-axis

trav

el)

25 (1.0

)

275.

5 (1

0.8)50

(2.0)150(5.9)

30(1.2)

40(1.6)

209.

5(8

.2)

40 (1.6

) 25 (1.0

)45 (1.8

)13

0.5

(5.1

)

125(4.9)

20(0.8)

520(20.5)

50 (2

.0)

55(2

.2)3

0(1.

2)

122 (4.8)

229 (

9.0)

105(

4.1)

116(

4.6)

715(28.1) 220 (8.7)

123.5(4.9) 24 (0.9)


Z1-Ref. Point

Spindle CL

MT #4

A-Ref. Point

122(4.8)

935 (36.8) (Z1-axis travel) 118(4.6)

1175 (46.3)

465.5 (18.3) (Z1-Ref. Point)

10 (0.4

)


935 (36.8) (Z1-axis travel)50

(2.0

)

407 (16.0)

35(1.4)

60 (2.4

)

60(2.4)

35(1

.4)

30(1

.2)

55(2

.2)

170(

6.7)

(Y-a

xis tr

avel

)

85(3

.3)

85(3

.3)

125(4.9)

20(0.8)

440(15.7)

120(4.7)

65(2.6)

140(5.5)

25(1.0)

174.

5 (6

.9)

400

(15.

7)

636.5 (25.1)

240 (9.4)

122(4.8)

80 (3.1

)20 (0.8

)30 (1.2

)25

9.5(

10.2

)60

.5(2

.4)

229(

9.0)

105(

4.1)

116(

4.6)

220(8.7)715(28.1)

123.5(4.9)

8(0.3)

123.5(4.9)

7(0.3)

Spindle CL

A-Ref. Point

Z1-Ref. Point

122(4.8)

935(36.8) (Z1-axis travel) 130(5.1)465.5(18.3) (Z1-Ref. Point)

10 (0.4

)

130(5.1)457.5(18.0)

925(36.4) (Z2-axis travel)

163(

6.4)

192(

7.6)

65 (2.6

)

400(

15.7

)

636.5(25.1) 407(16.0) 39(1.5)

35(1.4)

60 (2.4

)

60(2.4)

35(1

.4)

104.5(4.1)

935(36.8) (A-axis travel)

1187(46.7)

174.

5(6.

9)

147.5(5.8)


85(3

.3)8

5(3.

3)17

0(6.

7) (Y

-Stro

ke)

25 (1.0

) 275.

5(10

.8)50

(2.0)150(5.9)

30(1.2)

40(1.6)

209.

5(8.

2)40 (1.6

)25 (1.0

)45 (1.8

)130.

5(5

.1)

125(4.9)

20(0.8)

520(20.5)

50(2

.0)

55(2

.2)3

0(1.

2)

122(4.8)

467.5(18.4)

229(

9.0)

105(

4.1)

116(

4.6)

715(28.1) 220(8.7)

123.5(4.9)

24(0.9)

Z2-Ref. Point

Z1-Ref. Point

Spindle CL

MT #4

A-Ref. Point

122(4.8)

935 (36.8) (Z1-axis travel) 118(4.6)

1175(46.3)

465.5(18.3) (Z1-Ref. Point)

10 (0.4

)

130(5.1)

457.5(18.0)


163(

6.4)

935(36.8) (A-axis travel)

192(

7.6)

65(2

.6)

50(2

.0)

407(16.0)

35(1.4)

60 (2.4

)

60(2.4)

35(1

.4)

30(1

.2)

55(2

.2)

170(

6.7)

(Y

-axis

trav

el)

85(3

.3)

85(3

.3)

935(36.8) (Z1axis travel)

125(4.9)

20(0.8)

440(17.3)

120(4.7)

65(2.6)

140(5.5)

25(1.0)17

4.5

(6.9

)40

0(15

.7)

636.5(25.1)

240(9.4)

122(4.8)

80 (3.1

)20 (0.8

)30 (1.2

)25

9.5(

10.2

)60

.5(2

.4)

229(

9.0)

105(

4.1)

116(

4.6)

220(8.7)715(28.1)

123.5(4.9)

8(0.3)

123.5(4.9)

Ø175

(6.9

)

Spindle CL

Z2-Ref. Point

A-Ref. Point

Z1-Ref. Point

6" Chuck

6" Chuck

6" Chuck

6" Chuck

7

PUMA MX1600 series

PUMA MX1600

PUMA MX1600T

PUMA MX1600S

PUMA MX1600ST

Unit : mm (inch)

28 /

PUMA MX2100 series

PUMA MX2100

PUMA MX2100ST

PUMA MX2100S

Unit : mm (inch)

230

(9.1

)521 (20.5)

271

(10.

7)31 (1.2

)61 (2.4

)20

2(8

)

10 (0

.4)

335

(13.

2)20

(0.8

)

1290.5 (50.8)98.5 (3.9)1050 (41.3) [Z1-axis travel]142 (5.6)

205

(8.1

)11

5 (4

.5)

245

(9.7

)

84(3.3)

116.5(4.6)

628.5(24.7)

50(2)

125(4.9)

46(1.8)

210

(8.3

)56

5 (2

2.2)

[X1-

axis

trave

l]

ø210

(8.3

)

1015 (40)[T/S-axis travel]103.5(4.1)

509 (20.0)536 (21.1) 497 (19.6)536 (21.1)142 (5.6)142(5.6)

3 (0.1)

8" Chuck

545

(21.

5)20

(0.8

)

210

(8.3

)23

0 (9

.1)

10 (0

.4)

521 (20.5)[Z1-Ref Point]137 (9.3)1050 (41.3) [Z1-axis travel]142 (5.6)

ø210

(8.3

)

ø210

(8.3

)

1329 (52.3)

565

(22.

2)[X

1-ax

is tra

vel]


3 (0.1)

12(0.5)

142(5.6)

50(2)

125(4.9)

115(4.5)

16(0.6)

223(8.8)

521(20.5)

210

(8.3

)66

.7(2

.6)60 (2

.3)

228.

3(9

)

205

(8.1

)24

5 (9

.7)

115

(4.5

)

8" Chuck 8" Chuck

137(9.3)

1050(41.3)

142(5.6)

529 (20.8)521 (20.5)

1050 (41.3)

85 (3.4

)85 (3.4

)

8" Chuck8" Chuck

Milling spindle center

5 (0.2)

1050 (41.3)

529 (20.8)521 (20.5)

8" Chuck


230

(9.1

)

521 (20.5)[Z1-Ref Point]

142(5.6)

12(0.5)

MIN 137 (5.4)50(2)

87(3.4)

1329 (52.3)

125(4.9)

50(2)

223(8.8)

16(0.6)

115(4.5)20

5 (8

.1)

545

(21.

5)

115

(4.5

)24

5 (9

.7)

187

(7.4

) [X1

-axis

trav

el]

185

(7.3

)2 (0

.1)

165

(6.5

)85 (3.4

)

228.

3 (9

)

335

(13.

2)

20 (0

.8)

2 (0

.1)

521(20.5)

60 (2.3

)66

.7(2

.6)

210

(8.3

) ø210

(8.3

)

ø210

(8.3

)

45(1.8)

65.5(2.6)

153(2.1)

153 (6)

65 (2

.6)

10 (0

.4)

137 (9.3)1050 (41.3) [Z1-axis travel]142 (5.6)

210

(8.3

)56

5 (2

2.2)

[X1-

axis

trave

l]

497 (19.6)

963.5(37.9)

86.5(3.4)

60.5(2.4)

536 (21.1)142(5.6)

521 (20.5)[Z2-Ref point]1050 (41.3) (Z2-axis travel)

3 (0.1)


8" Chuck 8" Chuck

1050 (41.3) 137(9.3)

ø210

(8.3

)

529 (20.8)

85 (3.4

)85 (3.4

)

521 (20.5)142(5.6)

1050 (41.3)

8" Chuck 8" Chuck


PUMA MX

series

Working RangeProduct Preview

Basic information

Basic Structure

Cutting

Performance

Detailed

Information

Options

Diagrams

Specifications

Customer Support

Service

29 28 /

PUMA MX2100L

PUMA MX2100LST

Unit : mm (inch)

PUMA MX2100LS

45(1.8)65 (2

.6) 21

0 (8

.3)

230

(9.1

)56

5 (2

2.2)

[X1-

axis

trave

l]

245(

9.7)

115

(4.5

) 20

5(8.

1)

125(4.9)

50(2)

322)2.04( 1201(8.8)

142(5.6)

1036 (40.8)1550 (61) [A-axis travel]

497 (19.6)(0.5)

142(5.6)

3 (0.1)

)6.5( 241771 (30.4) [Z1-Ref point]

1829 (72)

ø210

(8.3

)

10 (0

.4)

ø210

(8.3

)

210

(8.3

)66

.7(2

.6)60 (2

.4)

228.

3 (9

)

20 (0

.8)5

45 (2

1.5)

8" Chuck 8" Chuck

115(4.5)

16(0.6)

12


85 (3.4

)85 (3.4

)

142(5.6)

1550(61.0)

771 (30.4) 779 (30.7)

ø210

(8.3

)

ø210

(8.3

)

8" Chuck 8" Chuck


ø210

(8.3

)

ø210

(8.3

)

85 (3.4

)85 (3.4

)8" Chuck 8" Chuck

)3.9( 731)16( 0551)6.5( 241)7.03( 977)4.03( 177

187

(7.4

)[X

1-ax

is tra

vel]

185

(7.3

)2 (0

.1)

165

(6.5

)85 (3.4

)

1021 (40.2)

)6.75( 5.3641)6( 351)6.2( 5.56

1036 (40.8)1550 (61) [A-axis travel]

1550 (61) [Z2-axis travel]771 (30.4) [Z2-Ref point]

497 (19.6)142 (5.6)

142 (5.6)

ø210

(8.3

)

ø210

(8.3

)

8" Chuck 8" Chuck

45(1.8)65 (2

.6)

125(4.9)

50(2)

)3.9( 731axis travel]-1Z[ )16( 0551)6.5( 241771 (30.4) [Z1-Ref point]

1829 (72)

210

(8.3

)23

0 (9

.1)

565

(22.

2)[X

1-ax

is tra

vel]

245

(9.7

)115

(4.5

)205

(8.1

)

10 (0

.4)

223(8.8)

210

(8.3

)66

.7(2

.6)60 (2

.4)

228.

3 (9

)

20 (0

.8)5

45 (2

1.5) 115

(4.5)16

(0.6)

142 (5.6)12(0.5)

MIN 137 (5.4)50(2)

87(3.4)

86.5(3.4)

60.5(2.4)

3 (0.1)

1832 (72.1)1550 (61.0) [Z1-axis travel] 1550 (61.0) [Z1-axis travel]140 (5.5) 137 (5.4)

137 (5.4)

142 (5.6)

125(4.9)

)6.5( 241 497 (19.6) 15.5(0.6)

103.5(4.1)

3 (0.1)

1550 (61) [A-axis travel]1074 (42.3)

1128.5(44.4)

116.5(4.6)

84(3.3)

46(1.8)

ø210

(8.3

)

245

(9.7

) 11

5 (4

.5)

205

(8.1

)23

0 (9

.1)

202

(8)

61 (2.4

)31 (1.2

)27

1(1

0.7)

10 (0

.4)

565

(22.

2)[X

1-ax

is tra

vel]

2

10 (8

.3)

20 (0

.8)

335

(13.

2)

8" Chuck

50(2)

771 (30.4) [Z1-Ref point]

)4.1( 5.63)7.03( 977)4.03( 177

1550 (61.0)Milling spindle center

8" Chuck

30 /

PUMA MX2600 series

PUMA MX2600

PUMA MX2600T

PUMA MX2600S

PUMA MX2600ST

Unit : mm (inch)

1585 (62.4) [Z1-axis travel]140 (5.5) 130 (5.1)

1855 (73)

127 (5)

140(5.5)

65(2.6)

121(4.8)

1048 (41.3) 86(3.4)

125(4.9)

194

(7.6

)58 (2.3

)60 (2.4

)31

8(1

2.5)217

(8.5

)10

2 (4

)31

1 (1

2.2)

370

(14.

6)26

0 (1

0.2)

240

(9.5

)

ø254

(10)10" Chuck Tail Stock

778 (30.6) [Z1-Ref. Point]1585 (62.4) [Z1-axis travel]

20 (0.8

)

974(38.4)

156(6.1)

807 (31.8)140 (5.5) 111 (4.4)

1836 (72.3)

1550 (61) [A-axis travel]538

(21.2)156(6.1)

12(0.5)

45(1.8)

65 (2

.6)

1000(39.4)

95(3.7)

115(4.5)

170(6.7)

297

(11.

7)25

70(1

) (2.

8)23

8(9

.4)

217

(8.5

)10

2 (4

)31

1 (1

2.2)

630

(24.

8) [X

1-ax

is tra

vel]

240

(9.5

)

ø254

(10)

ø254

(10)

100(3.9)

43(1.9)

10 (0

.4)

10" Chuck 10" Chuck

140(5.5)

65(2.6)

370

(14.

6)26

0 (1

0.2)

778(30.6) [Z1-Ref. Point]1585 (62.4) [Z1-axis travel]

807 (31.8)140(5.5)

1515 (59.7) [Z2-axis travel]748 (29.5) [Z2-Ref. Point]

170(6.7)

87(3.4)

45(1.8)

141(5.6)

43(1.7)

20 (0

.8)

1022 (40.2)156(6.1)

130(5.1)

1855 (73)

1550 (61) [A-axis travel]

2 (0

.1)

538 (21.2) 12(5)

127(0.5)

45(1.8)65

(2.6

)

140(5.5)

65(2.6)

1048 (41.3) 86(3.4)

125(4.9)

194

(7.6

)58 (2.3

)60 (2.4

)31

8(1

2.5)21

7 (8

.5)

102

(4)

311

(12.

2)

370

(14.

6)26

0 (1

0.2)

630

(24.

8) [X

1-ax

is tra

vel]

240

(9.5

)

220 (

8.7) [X

2-axis

trav

el]18

2.5

(7.2

)10

0(3

.9)21

8 (8

.6)2

(0.1

)

48 (1.9

) 152

(6)

68 (2.7

)

ø254

(10)

100(3.9)

43(1.7)

10 (0

.4)

170(6.7)

166(6.5)

767 (30.2)

1286(50.6)

140

(5.5

)32 (1.3

)

10" Chuck Tail Stock

2 (0

.1)

1515 (59.7) [Z2-axis travel]748 (29.5) [Z2-Ref. Point]

170 (6.7)

141(5.6)

43(1.7)

156 (6.1)1550 (61) [A-axis travel]

538 (21.2) 12(0.5)

45(1.8)65

(2.6

)

140(5.5)

65(2.6) 21

7 (8

.5)

102

(4)

311

(12.

2)

370

(14.

6)26

0 (1

0.2)

630

(24.

8) [X

1-ax

is tra

vel]

240

(9.5

)

220 (

8.7) [X

2-axis

travel

]

182.

5(7

.2)

100

(3.9

)21

8 (8

.6)

2 (0

.1)

48 (1.9

)

ø254

(10)

100(3.9)

43(1.7)

10 (0

.4)

166(6.5)

767 (30.2)

140

(5.5

)32 (1.3

)

778(30.6) [Z1-Ref. Point]1585 (62.4) [Z1-axis travel]

68(2.7)

93(3.7)

20 (0

.8)

974 (38.4)

807 (31.8)140(5.5)

111(4.4)

1836 (72.3)

156(6.1)

1000(39.4)

95(3.7)

115(4.5)

170(6.7)

297

(11.

7)25 (1

)70 (2.8

)23

8(9

.4)

48 (1.9

)17

2(6

.8)

ø254

(10)

151 (5.9)

1238(48.7)

10" Chuck 10" Chuck

121(4.8)

PUMA MX

series

Working RangeProduct Preview

Basic information

Basic Structure

Cutting

Performance

Detailed

Information

Options

Diagrams

Specifications

Customer Support

Service

31 30 /

987 (38.9) (Distance between spindle nose) 987 (38.9) (Distance between spindle nose)


987 (38.9) (Distance between spindle nose)



(X2-ax

is tra

vel)

75(3.0)

177

(7.0

)10

3(4

.1)

165

(6.5

)

140

(5.5

)25 (1.0

)

123.5 (4.9)

117

(4.6

)48

187 (7.4)

MT #4

670 (26.4)55(2.2)

5 (0.2) 104 (4.1)90 (3.5)

(X2-ax

is tra

vel)

80 (3.1)

177

(7.0

)10

0(3

.9)

165

(6.5

)

143

(5.6

)22

(0.9

)

123.5 (4.9) 140

(5.5

)

Ø175

(6.9

)

25 (1

.0)

85 (3.3

)80 (3.1

)

182 (7.2)

MT #4

653 (25.7) 10 (0.4)62 (2.4)

90 (3.5)

(X2-ax

is tra

vel)

177

(7.0

)10

3(4

.1)

165

(6.5

)

140

(5.5

)25

123.5 (4.9)

118

(4.6

)47 (1.9

)

115

(4.5

)50 (2.0

)

55 (2.2)55 (2.2)

55 (2.2)55 (2.2)

57 (2.2)205 (8.1)

MT #4

615 (24.2)

615 (24.2)75

5 (0.2) 5 (0.2)120(4.7)

Ø175

(6.9

)

Ø175

(6.9

)

PUMA MX1600T/735

Single OD Holder

ID Holder

Double OD Holder

Unit : mm (inch)

Working Range of Lower Turret (For Turning, 8 stations)

32 /

PUMA MX1600ST/735

Single OD holder Double OD holder

Unit : mm (inch)



(X2-axi

s travel)

205 (8.1)

75(3.0)

53(2.1)

45 (1.8)

177 (

4.6)

103

(4.1)

165 (

6.5)

47(1.

9) 140 (

5.5)2

5 (1.0

)11

8 (4.6

)

50 (2.0)

115

(4.5)

123.5 (4.9)

83(3.3)

585 (23.0)

585 (23.0) 87(3.4)

57(2.2)

5(0.2)

5(0.2)

120(4.7)

90 (3.5)

Ø175

(6.9)



(X2-ax

is trav

el)

205 (8.1) 45 (1.8)

177 (

4.6)

103

(4.1)

30 (1.2)

165 (

6.5)

130

(5.1)

140

(5.5)

25 (1

.0)

35 (1

.4)

48 (1.9)

177

(4.6)

123.5 (4.9)

83(3.3)

585 (23.0)57(2.2)

5(0.2)

90(3.5)

110(4.3)

Ø175

(6.9)



(X2-ax

is trav

el)

200 (7.9)

120(4.7)

50 (2.0)

177

(7.0)

100

(3.9)

110

(4.3)

165 (

6.5)

22 (0.

9)

22 (0.

9)

33 (1.3)

25 (1.0)

118

(4.6)

123.5 (4.9)

78 (3.1)

78 (3.1)

617 (24.3)

617 (24.3)

22(0.9)

8(0.3)22

(0.9)8

(0.3)

80Ø175

(6.9)

ID holder

PUMA MX

series

Working Range of Lower Turret (For Turning, 8 stations)Product Preview

Basic information

Basic Structure

Cutting

Performance

Detailed

Information

Options

Diagrams

Specifications

Customer Support

Service

33 32 /

PUMA MX1600T/735 / MX1600T

Single OD Tool holder

Angular milling head

ID Tool holder

Double OD Tool holder

Straight milling head

Unit : mm (inch)

165(

6.5)

15(0

.6)

22(0

.9)

71(2.8)

191(7.5)

85 (3.3)

125

(4.9

)25

(1.0

)

80(3.1)

62(2.4)

12(0.5)

663(26.1) / 851(33.5)

59(2.3)

192

(7.6

)

143

(5.6

)

Ø123.5 (4.9)

(X2-ax

is tra

vel)

MT #4

175(

6.9)

Ø

27 (1.1

)13

8(5

.4)

165(6

.5)

197(7.8) 65(2.6)

63(2.5)

65(2.6)

615(24.2) / 815(32.1) 45(1.8)

90 (3.5

)19

2(7

.6)

45 (1.8

)12

0(4

.7)

5(0.2)

5(0.2)

62(2.4)

62(2.4)

65(2.6)

615(24.2) / 815(32.1) 45(1.8)

48 (1.9)

117

(4.6)17

5(6

.9)

Ø

123.5(4.9) (X2

-axis

trave

l)

MT #4

27(1.

1)

165(6

.5)90 (3.5

)19

2(7

.6)

65(2.6)

660(26.0) / 860(33.9)

63(2.5)

725(28.5) / 925(36.4) (Z2-axis travel) 199(7.8)

987(38.9) / 1187(46.7) (Distance between spindle nose)

48 (1.9

)117

(4.6

)13

8(5

.4)

62(2.4)

5(0.2)

123.5(4.9)

Ø

175(

6.9)

Ø

(X2-ax

is tra

vel)

MT #4

65 (2.6)

163

(6.4

)2

(0.1

)

165(

6.5)

165(

6.5)

639(25.2) / 839(33.0)68(2.7)

202(8.0)

725 (28.5) / 925(36.4) (Z2-axis travel)60(2.4)

40 (1.6)

125

(4.9

)

50(2

.0)

192

(7.6

)

70(2.8)130(5.1)

115

(4.5

)

18(0.7)

123.5(4.9) (X2

-axis

trave

l) MT #4

175(

6.9)

Ø

175(

6.9)

Ø

12 (0

.5)

43(1.7)

130(5.1)

132(5.2)

15(0

.6)

51 (2.0)

22(0.9)

660(26.0) / 860(33.9)

84 (3.3

)66 (2.6

)

123.5(4.9)

Ø

(X2-ax

is tra

vel)

MT #4

725(28.5) / 925(36.4) (Z2-axis travel)

725(28.5) / 925(36.4) (Z2-axis travel)

725(28.5) / 925(36.4) (Z2-axis travel)


987 (38.9) / 1187(46.7) (Distance between spindle nose)987 (38.9) / 1187(46.7) (Distance between spindle nose)


6" Chuck 6" Chuck

6" Chuck

6" Chuck

6" Chuck

Working Range of Lower Turret (For Turn-Milling, 16 stations, BMT45P)

34 /

PUMA MX1600ST/735 / MX1600STUnit : mm (inch)



ID Tool holder



65 (2.6

)

163

(6.4)

2(0.

1)

165(6

.5)

41 (1.6

)

125(4.9)

78(3.1)

582(22.9) / 782(31.3)12(0.5)

53(2.1)

594(23.4) / 794(31.3)128(5.0)

50(2.0)200(7.9)

41(1.

6)10

9(4

.3)

15(0

.6)

124

(4.9

)

192

(7.6

)

70(2.8)

123.5(4.9)

123.5(4.9)

Ø

70(2.8)

(X2-ax

is tra

vel)

27(1

.1)

138

(5.4

)

165(

6.5)

197(7.8) 53(2.1)

63(2.5) 65(2.6)

75(3.0)

75(3.0)

90 (3.5

)19

2(7

.6)

120

(4.7

)

65(2.6)

117

(4.6

)

123.5(4.9)Ø

Ø

(X2-ax

is tra

vel)

165(6

.5)33 (1.3)

22 (0.9)

189(7.4)

85 (3.3

)

85 (3.3)

25 (1.0

)

25 (1.0

)11

8(4

.6)

22 (0.9

)

80(3.1)

109(4.3)

19(0.7)

22(0.9)

67(2.6)

67(2.6)

61(2.4)

19(0.7)

22(0.9)

617(24.3) / 817(32.2)

617(24.3) / 817(32.2)

59(2.3)

192

(7.6

)

Ø

(X2-ax

is tra

vel)

27(1

.1)

165(

6.5)

90 (3.5

)19

2(7

.6)

65(2.6)

585(23.0) / 785(30.9) 75(3.0)

197(7.8)

725(28.5) / 925(36.4) (Z2-axis travel) 53(2.1)

975(38.4) / 1175(46.3) (Distance between spindle nose) 975(38.4) / 1175(46.3) (Distance between spindle nose)




110

(4.3

)55

(2.2

)

138

(5.4

)

48 (1.9

)11

7(4

.6)

62(2.4)

5(0.2)

130(5.1)

175(

6.9)

175(

6.9)

Ø

123.5(4.9)

(X2-ax

is tra

vel)

165(6

.5)12

(0.5

)

81 (3.2

)

43(1.7)

48(1.9)

130(5.1)

120(4.7)

15(0

.6)

51 (2.0)

22(0.9)

612(24.1) / 812(32.0)

84 (3.3

)

84 (3.3)

66 (2.6)

192

(7.2

)

123.5(4.9)

Ø

(X2-ax

is tra

vel)

175(

6.9)

175(

6.9)

Ø17

5(6.

9)Ø

175(

6.9)

Ø Ø17

5(6

.9)

Ø17

5(6

.9)

175(

6.9)

Ø

725(28.5) / 925(36.4) (Z2-axis travel)

725(28.5) / 925(36.4) (Z2-axis travel) 725(28.5) / 925(36.4) (Z2-axis travel)

725(28.5) / 925(36.4) (Z2-axis travel)

585(23.0) / 785(30.9)

585(23.0) / 785(30.9)

6" Chuck 6" Chuck

6" Chuck

6" Chuck

6" Chuck

PUMA MX

series

Working Range of Lower Turret (For Turn-Milling, 16 stations, BMT45P)Product Preview

Basic information

Basic Structure

Cutting

Performance

Detailed

Information

Options

Diagrams

Specifications

Customer Support

Service

35 34 /


220 (8.7) 1050 (41.3) (Z2-axis travel)

862 (33.9)

22 (0.9)

61[98] (2.4[3.9])

106 (4.2)

100 (3.9)

100 (3.9)

862 (33.9)

1050 (41.3)

106 (4.2)

8"Chuck8"Chuck 37 (1

.5)

150

(5.9

)12

0 (4

.7)

187

(7.4

)(X

2-ax

is tr

avel

)

93 [1

10] (

3.7[

4.3]

)

181 (7.1)

4[3] (0.2[0.1])

8"Chuck8"Chuck

872 (34.3)90 (3.5)

879 (34.6)90 (3.5)

1050 (41.3)

187

(7.4

)12

0 (X2

-axis t

ravel)37

(1.5

)15

0 (5

.9)

110

(4.3

)

1050 (41.3)(Z2-axis travel)220 (8.7)


64(2.5)

88 (3.5)

81 (3.2)

215 (8.5)

110

(4.3

)

59 (2.3)

3 (0.1)

8"Chuck8"Chuck

66(2.6)

1050 (41.3) (Z2-axis travel)


153 (6.0)

995 (39.2)55 (2.2)

783 (30.8)126 (5.0)147 (5.8)521 (20.5)

(Z2-Ref point)142(5.6)

60 (2.4)

87 (3.4)

126 (5.0)

48 (1

.9)

85 (3

.4)

187

(7.4

)(X

2-ax

is tr

avel

)

185

(7.3

)

2 (0

.1)

3 (0.1)

61 (2.4)

8"Chuck

85 (3

.4)

85 (3

.4)

187

(7.4

)58

(2

.3)

(X2-

axis

trav

el)

25 (1

.0)

3 (0.1)60 (2.4)900 (35.4)48 (1.9)

137 (5.4)1050 (41.3)(Z2-axis travel)142(5.6)


8"Chuck

8"Chuck 8"Chuck

207 (8.2)

)0.3( 57)1.1( 72

72 (2.8)

885 (34.8)

1050 (41.3) (Z2-axis travel)


75 (3.0)885 (34.8)37 (1.5)63 (2.5)

122 (4.8)1050 (41.3) (Z2-axis travel)147 (5.8)

123

(4.8

)

100

(3.9

) 18

7 (7

.4)

(X2-

axis

trav

el)

170

(6.7

) 17

(0.7

)

123

(4.8

)

3 (0.1)

2 (0.1

)

(4.7

)

PUMA MX2100STUnit : mm (inch)



ID Tool holder




36 /

PUMA MX2100LSTUnit : mm (inch)



ID Tool holder



8" Chuck 8" Chuck

181(7.1)

220(8.7) 100

(3.9)


1550 (61.0) (Z2-axis travel) 1550 (61.0) (Z2-axis travel)59 (2.3) 59 (2.3)88 (3.5)

88 (3.5)98 (3.9)

3 (0.1)

1362 (53.6)1550 (61.0)

1362 (53.6)

17 (0

.7)

150

(5.9

)

110

(4.3

)

187

(7.4

)12

0 (4

.7)(

X2-a

xis

trave

l)

37 (1

.5)

100(3.9)

8" Chuck8" Chuck

64(2.5)

220(8.7) 90

(3.5)


88 (3.5)

81(3.2)

215(8.5)

3 (0.1)

1372 (54.0)1550 (61.0)

1379 (54.3)

110

(4.3

)

65 (2

.6)

150

(5.9

)

110

(4.3

)65

(2.6

)

187

(7.4

)12

0 (4

.7)

(X2--a

xis tra

vel)37

(1

.5)

90(3.5)

8" Chuck 8" Chuck

66(2.6)

153 (6.0)

55 (2.2)126 (5.0)147 (5.8)

142 (5.6) 771 (30.3) (Z2-Ref point)


1550 (61.0) (Z2-axis travel)

1550 (61.0) (Z2-axis travel)

60 (2.4)

72 (2.8)

3 (0.1)

60(2.4)

126 (5.0) 87(3.4)1495 (58.9)

1283 (50.5)

2 (0

.1)

85 (3

.4)

185

(7.3

)

2 (0

.1)

31 (1

.2)

187

(7.4

)(X

2--a

xis

trave

l)

8" Chuck 8" Chuck

142 (5.6)

48(1.9)

43 (1.7)


1550 (61.0) (Z2-axis travel) 137 (5.4)

3 (0.1)60 (2.4)

1400 (55.1)

85

(3.4

)

27 (1

.1)

85 (3

.4)

187

(7.4

) 25

(1.0

)58

(2

.3)

(X2-

-axi

s tra

vel)

8" Chuck 8" Chuck

147(5.8)

207 (8.2)

63 (2.5)27 (1.1)


75 (3.0)

75(3.0)

159 (6.3)3

(0.1)

1385 (54.5)

1523 (60.0)

1385 (54.5)

32 (1

.3)

140

(5.5

)

170

(6.7

)

140

(5.5

)

187

(7.4

)10

0 (3

.9) (X

2--a

xis

trave

l)

17 (0

.7)

63(2.5)

120(4.7)

120(4.7)

PUMA MX

series

Working Range of Lower Turret (For Turn-Milling, 12 stations, BMT55P)Product Preview

Basic information

Basic Structure

Cutting

Performance

Detailed

Information

Options

Diagrams

Specifications

Customer Support

Service

37 36 /

PUMA MX2600STUnit : mm (inch)



Boring Bar holder



1515 (59.7) (Z2-axis travel)

156 (6.1)156 (6.1)

220

(8.7

)

182.

5(7

.2)

ø254

(10.

0)

ø254

(10.

0)

100(3.9)

43(1.7)

143(5.6)

1244 (49.0)

130

(5.1

)

15(0.6)

7(0.3)

74(2.9)

247 (9.7)

32 (1

.3)

188

(7.4

)

34 (1.3

)27 (1.1

)15

9(6

.3)

87 (3.4)4181

(3.2)1836 (72.3) (Distance between spindle nose) 147 (5.8)

(1.6)

56 (2.2

)164

(6.5

)

(X2-

axis

trav

el)

10"Chuck

10" Chuck

1515 (59.7) (Z2-axis travel)

651)1.6( 651(6.1)

220

(8.7

)

182.5

(7.2)

ø254

(10.

0)

ø254

(10.

0)

100(3.9)

43(1.7)

116(4.6)

1244 (49.0)

130

(5.1)

74 (2.9)247 (9.7)

32 (1

.3)

188

(7.4

)

56 (2.2)

87(3.4)

68(2.7)

56 (2.2

)164

(6.5

)

132

(5.2)

32 (1.3

)

7 (0.3)15 (0.6)

154 (6.1)

)4.3( 78)7.2( 86 270(10.6)

1090 (42.9)81 (3.2) 1836 (72.3) (Distance between spindle nose)



)8.5( 741

(X2-

axis

trav

el)

10" Chuck10"Chuck

1515 (59.7) (Z2-axis travel)

748 (29.5)(Z2-Ref. Point)

170 (6.7)

68 (2.7)

93 (3.7)

43 (1.7)

156 (6.1)

2 (0

.1)

156(6.1)

220

(8.7

)

182.

5(7

.2)

100

(3.9

)21

8(8

.6)2

(0.1

)

48 (1.9

)

ø254

(10.

0)

ø254

(10.

0)

100 (3.9)

43 (1.7)

151 (5.9)

83 (3.3)166

(6.5) 767 (30.2)

62 (2.4)74 (2.9)

48 (1.9)

172

(6.8

)

140

(5.5

)32 (1.3

)

141 (5.6)

141(5.6)

1238 (48.7)

(X2-

axis

trav

el)

10" Chuck 10"Chuck

1515 (59.7) (Z2-axis travel)748 (29.5) (Z2-Ref. Point)

170 (6.7)

156 (6.1)2

(0.1

)156(6.1)

220

(8.7

)

182.

5(7

.2)

58 (2.3

)40

(1.6

)

ø254

(10.

0)

ø254

(10.

0)

100 (3.9)

43 (1.7)

151 (5.9)767 (30.2)

8(0.3)

41(1.6)

47 (1.9)94 (3.7)

8(0.3)

60 (2.4)

128

(5.0

)53 (2.1

)

128

(5.0

)58 (2.3

)34 (1

.3)

135(5.3)

1263 (49.7)

7(0

.3)32

(1.3

)

)8.5( 741)2.3( 18(X

2-ax

is tr

avel

)

10" Chuck10"Chuck

1515 (59.7) (Z2-axis travel)

156 (6.1) 156(6.1)

220

(8.7

)

182.

5(7

.2)

ø254

(10.

0)

ø254

(10.

0)

100 (3.9)

43(1.7)

123

(4.8

)

81(3.2)

240(9.5)

25 (1

.0)

195

(7.7

)

33 (1.3

)13

1 (5

.2)

24 (0.9)

80(3.2)

120(4.7)

15 (0.6)

32 (1.3)

120(4.7)

90(3.5)

35(1.4)

33 (1.3

)187

(7.4

)

11(0.4)

11(0.4)

35(1.4)

138(5.4)

80(3.2)

1251 (49.3)

228(9.0)

1161(45.7)

81(3.2)

741(5.8)

(X2-

axis

trav

el)

10"Chuck

10" Chuck

1238 (48.7)


38 /

Machine Specifications

PUMA MX1600series

* { } : Option

Description UnitMX1600/735

/ MX1600MX1600S/735

/ MX1600S

MX1600T/735

/ MX1600T

MX1600ST/735

/ MX1600ST

Capacity Swing over bed mm (inch) 680 (26.8)

Recom. Turning diameter mm (inch) 170 (6.7)

Max. Machining diameter mm (inch) 330 (13.0)

Max. Turning length mm (inch) 700 / 900 (27.6 / 35.4)

Chuck size inch 6

Bar working diameter mm (inch) 51 (2.0)

Travels

Travel distance

X1-axis mm (inch) 450 (17.7)

Z1-axis mm (inch) 735 / 935 (28.9/ 36.8)

Y-axis mm (inch) 170 (±85) (6.7 (±3.3))

X2-axis mm (inch) - - 165 (6.5)

Z2-axis mm (inch) - - 725 / 925 (28.5 / 36.4)

A-axis mm (inch) - 735/935

(28.9 / 36.8)-

735/935 (28.9 / 36.8)

Feedrate

Rapid Traverse Rate

X1-axis m/min (ipm) 36 (1417.3)

Z1-axis m/min (ipm) 36 (1417.3)


X2-axis m/min (ipm) - - 24 (944.9)

Z2-axis m/min (ipm) - - 36 (1417.3)

A-axis m/min (ipm) - 30 (1181.1) - 30 (1181.1)

Left spindle

Max. Spindle speed r/min 6000

Spindle nose ASA A2-5

Spindle bearing diameter (Front) mm (inch) 100 (3.9)

Spindle through hole mm (inch) 62 (2.4)

Min. spindle Indexing angle(C-axis) deg. 0.0001

Right spindle

Max. Spindle speed r/min - 6000 - 6000

Spindle nose ASA - A2-5 - A2-5

Spindle bearing diameter (Front) mm (inch) - 100 (3.9) - 100 (3.9)

Spindle through hole mm (inch) - 62 (2.4) - 62 (2.4)

Min. spindle Indexing angle(C-axis) deg. - 0.001 - 0.001

Milling spindle

Max. spindle speed r/min 12000 {18000}*

Min. spindle Indexing angle(B-axis) deg. 0.001

Automoatic Tool Changer

Tool storage capa. (Max.) ea 40 / 40 {80}*

Tool changer arm SWING ARM

Tool selection FIXED ADDRESS

Max. tool diameter

Continous mm (inch) 70 (2.8)

Without Adjacent Tools mm (inch) 95 (3.7)

Max. tool length mm (inch) 200 (7.9)

Max. tool weight kg (Ib) 4 (8.8)

Max. tool moment N·m (ft-lbs) 3.9 (2.9)

Tool change time (T-T-T) s 2.1

Lower Turret

No. of tool stations ea - - 8{16, BMT45P}* / 16, BMT45P

OD tool size mm (inch) - - 20 x 20 (0.8 x 0.8)

Max. boring bar size mm (inch) - - 32 (1.3)

Turret Indexing time(1 station swivel) s - - 0.2 / 0.35

Max. Rotary tool speed r/min - - {6000}* / 6000

Servo driven Tailstock

Quill diameter mm (inch) - - -

Quill bore taper MT Built-in dead #4 - Built-in dead #4 -

Quill travel mm (inch) 735/935 (28.9/36.8)

- 735/935

(28.9/36.8)-

Motors Left spindle motor power kW (Hp) 15 / 11 (20.1 / 14.8)

Right spindle motor power kW (Hp) - 15 / 11

(20.1 / 14.8) - 15 / 11

(20.1 / 14.8)

Milling spindle motor power kW (Hp) 9/7.5/3.7 (12.1/10.1/4.7)

Coolant pump motor power kW (Hp) 2.5(3.4)Power source

Electric power supply (rated capacity) kVA 43.35 55.28 50.77 64.42

Machine Dimensions

Height mm (inch) 2780 / 2760 (109.4 / 108.7)

Length mm (inch) 3300 / 3800 (129.9 / 149.6)

Width mm (inch) 2686 / 2530 (105.7 / 99.6)

Weight kg (Ib)10800 / 11100

(23809.9 / 24470.9)

11100 / 11400 (24470.9 / 25132.3)

11000 / 11300 (24250.8 / 24911.9)

11300 / 11600 (24911.9 / 25573.2)

PUMA MX

series

Product Preview

Basic information

Basic Structure

Cutting

Performance

Detailed

Information

Options

Diagrams

Specifications

Customer Support

Service

39 38 /

PUMA MX2100series

* { } : Option

Description UnitPUMA

MX2100[L]

PUMA

MX2100S[LS]

PUMA

MX2100T[LT]

PUMA

MX2100ST[LST]

PUMA

MX2600T

PUMA

MX2600ST

Capacity Swing over bed mm (inch) 750 (29.5) 1000 (39.4)

Recom. Turning diameter mm (inch) 210 (8.3) 255 (10.0)

Max. Machining diameter mm (inch) 540 (21.3) 760 (29.9)

Max. Turning length mm (inch) 1020 [1520] (40.2 [59.8]) 1540 (60.6)

Chuck size inch 8 10

Bar working diameter mm (inch) 65 (2.6) 76(3.0)

Travels

Travel distance

X1-axis mm (inch) 565 (22.2) 630 (24.8)

Z1-axis mm (inch) 1050 [1550] (41.3 [61.0]) 1585 (62.4)

Y-axis mm (inch) 170 (±85) (6.7 (±3.3)) 230(±115) (9.1(±4.5))

X2-axis mm (inch) - - 187 (7.4) 220 (8.7)

Z2-axis mm (inch) - - 1050 [1550] (41.3 [61.0]) 1515 (59.6)

A-axis mm (inch) -1050 [1550] (41.3 [61.0])

-1050 [1550] (41.3 [61.0])

- 1550 (61.0)

Feedrate

Rapid Traverse Rate

X1-axis m/min (ipm) 36 (1417.3)

Z1-axis m/min (ipm) 36 (1417.3)


X2-axis m/min (ipm) - - 24 (944.9)Z2-axis m/min (ipm) - - 36 (1417.3)A-axis m/min (ipm) - 30 (1181.1) - 30 (1181.1) - 30 (1181.1)

Left spindle

Max. Spindle speed r/min 5000 4000

Spindle nose ASA A2-6 A2-8

Spindle bearing diameter (Front) mm (inch) 110 (4.3) 130 (5.1)

Spindle through hole mm (inch) 76 (3.0) 86 (3.4)

Min. spindle Indexing angle(C-axis) deg. 0.001

Right spindle

Max. Spindle speed r/min - 5000 - 5000 - 4000

Spindle nose ASA - A2-6 - A2-6 - A2-8

Spindle bearing diameter (Front) mm (inch) - 110 (4.3) - 110 (4.3) - 130 (5.1)

Spindle through hole mm (inch) - 76 (3.0) - 76 (3.0) - 86 (3.4)

Min. spindle Indexing angle(C-axis) deg. - 0.001 - 0.001 - 0.001

Milling spindle

Max. spindle speed r/min 12000

Min. spindle Indexing angle(B-axis) deg. 0.001

Automoatic Tool Changer

Tool storage capa. (Max.) ea 40 {80}*

Tool changer arm SWING ARM

Tool selection FIXED ADDRESS

Tool shank CAPTO C6 {HSK A63}*

Max. tool diameter

Continous mm (inch) 90 (3.5)

Without Adjacent Tools mm (inch) 120 (4.7) 130 (5.1)

Max. tool length mm (inch) 300 (661.4) 400 (881.8)

Max. tool weight kg (Ib) 9 10

Max. tool moment N·m (ft-lbs) 8.2 (6.1) 9.8 (7.2)

Tool change time (T-T-T) s 2.0

Lower Turret

No. of tool stations ea - - 12, BMT55P 12, BMT65P

OD tool size mm (inch) - - 25 x 25 (1.0 x 1.0)

Max. boring bar size mm (inch) - - 40 (1.6)

Turret Indexing time(1 station swivel) s - - 0.2

Max. Rotary tool speed r/min - - 5000 4000

Servo driven Tailstock

Quill bore taper MTBuilt-in dead

#4-

Built-in dead #4

- Built-in dead

#5 -

Quill travel mm (inch)1050 [1550] (41.3 [61.0]) -

1050 [1550] (41.3 [61.0]) - 1550 (61.0) -

Motors Left spindle motor power kW (Hp) 22 / 18.5 (29.5 / 24.8) 26 / 22 (34.9 / 29.5)

Right spindle motor power kW (Hp) - 22 / 18.5

(29.5 / 24.8) - 22 / 18.5

(29.5 / 24.8) - 26 / 22

(34.9 / 29.5)

Milling spindle motor power kW (Hp) 18.5 / 15 / 11 (24.8 / 20.1 / 14.8) 22/18.5/15 (29.5/24.8/20.1)

Coolant pump motor power kW (Hp) 2.5 (3.4)Power source

Electric power supply (rated capacity) kVA 50 [53] 56.7 [75] 50 [53] 88 [89.8] 70 100

Machine Dimensions

Height mm (inch) 2805 (110.4) 3011 (118.6)

Length mm (inch) 4850 [5945] (190.9 [234.1]) 6070 (239.0)

Width mm (inch) 2525 [2490] (99.4 [98.0]) 2682 (105.6)

Weight kg (Ib)11500 [12800]

(25352.8 [28218.8])

11800 [13800](26014.2

[30423.3])

11700 [13700](25793.7

[30202.9])

12000 [14000](26455.1

[30864.3])

14900(32848.4)

15500(34171.1)

• The specifications and information above-mentioned may be changed without prior notice.• For more details, please contact Doosan.

40 /

CNC Specifications

No. Division Item Spec.

PUMA MX1600 / 2100{T} /

{MX2600T}

PUMA MX1600 /

2100S{ST} / {MX2600ST}

PUMA MX1600 / 2100{T} /

{MX2600T}

PUMA MX1600 /

2100S{ST} /{MX2600ST}

Fanuc 31i Fanuc 31i Fanuc 31i-5 Fanuc 31i-5

1

Controlled axis

Controlled axes6{8}: X1, Z1, C1, Y, B, A,

{X2, Z2}

7{9}: X1, Z1, C1, Y, B, C2, A, {X2, Z2}

6{8}: X1, Z1, C1, Y, B, A,

{X2, Z2}

7{9}: X1, Z1, C1, Y, B, C2, A, {X2, Z2}

2 Simultaneously controlled axes 4 axes 4 axes 5 axes 5 axes

3 Synchronous/Composite control C1 & C2 Synchro Control

X ● X ●

4 HRV2 control ● ● ● ●

5 Inch/metric conversion ● ● ● ●

6 Stored stroke check 1 ● ● ● ●

7 Interference check for rotary area ● ● ● ●

8Unexpected disturbance torque detection function

● ● ● ●

9

Operation

DNC operation with memory card ● ● ● ●

10 Tool retract and recover ○ ○ ○ ○

11 Dry run ● ● ● ●

12 Single block ● ● ● ●

13 Handle interruption ○ ○ ○ ○

14 Incremental feed x1,x10,x100 ● ● ● ●

15 Manual handle retrace ○ ○ ○ ○

16 Active block cancel ○ ○ ○ ○

17

Interpolation functions

Nano interpolation ● ● ● ●

18 Linear interpolation ● ● ● ●

19 Circular interpolation ● ● ● ●

20 Polar coordinate interpolation ● ● ● ●

21 Cylindrical interpolation ● ● ● ●

22 Helical interpolation ● ● ● ●

23 Thread cutting, synchronous cutting ● ● ● ●

24 Multi threading ● ● ● ●

25 Thread cutting retract ● ● ● ●

26 Continuous threading ● ● ● ●

27 Variable lead thread cutting ○ ○ ○ ○

28 Circular thread cutting ○ ○ ○ ○

29 Polygon machining with two spindles ● ● ● ●

30 High-speed skipInput signal is 8 points.

○ ○ ○ ○

31 3rd/4th reference position return ● ● ● ●

32 Balanced cuttingOnly for more than 2 path control

X{●} X{●} X{●} X{●}

33

Feed function

Override cancel ● ● ● ●

34 AI contour control I (30blocks) ● ● - -

35 AI contour control II (200blocks) ○ ○ ● ●

36 High-speed processing (600blocks) ○ ○ ● ●

37 Rapid traverse block overlap ● ● ● ●

38

Program input

Optional block skip ● ● ● ●

39 Absolute/incremental programmingCombined use in the same block

● ● ● ●

40 Diameter/Radius programming ● ● ● ●

41Dynamic switching of diameter/radiusspecification

○ ○ ● ●

42 Automatic coordinate system setting ● ● ● ●

43 Workpiece coordinate system G52 - G59 ● ● ● ●

44 Workpiece coordinate system preset ○ ○ ○ ○

45Addition of workpiece coordinate system

48 pairs ○ ○ ○ ○

46Addition of workpiece coordinate system

300 pairs ○ ○ ○ ○

47Direct drawing dimension program-ming

● ● ● ●

48 G code system A ● ● ● ●

49 G code system B/C ● ● ● ●

DOOSAN FANUC i

PUMA MX

series


Product Preview

Basic information

Basic Structure

Cutting

Performance

Detailed

Information

Options

Diagrams

Specifications

Customer Support

Service

41 40 /

No. Division Item Spec.

PUMA MX1600 / 2100{T} /

{MX2600T}

PUMA MX1600 / 2100S{ST} / {MX2600ST}

PUMA MX1600 / 2100{T} /

{MX2600T}

PUMA MX1600 / 2100S{ST} /{MX2600ST}

Fanuc 31i Fanuc 31i Fanuc 31i-5 Fanuc 31i-5

50

Program input

Chamfering/Corner R ● ● ● ●

51 Custom macro ● ● ● ●

52 Addition of custom macro common variables #100 - #199, #500 - #999 ● ● ● ●

53 Interruption type custom macro ○ ○ ○ ○

54 Canned cycle ● ● ● ●

55 Multiple repetitive cycles G70~G76 ● ● ● ●

56 Multiple repetitive cycles II Pocket profile ● ● ● ●

57 Canned cycle for drilling ● ● ● ●

58 Automatic corner override ○ ○ ○ ○

59 3-dimensional coordinate system conversion ● ● ● ●

60 Coordinate system shift ● ● ● ●

61 Direct input of coordinate system shift ● ● ● ●

62 Real time custom macro ○ ○ ○ ○

63 Pattern data input ○ ○ ○ ○

64 Operation Guidance Function

EZ Guidei(Conversational Programming Solution) ● ● ● ●

65 EZ Operation package ● ● ● ●

66

Auxiliary/Spindle speed function

Constant surface speed control ● ● ● ●

67 Spindle override 0 - 150% ● ● ● ●

68 Spindle orientation ● ● ● ●

69 Spindle synchronous control X ● X ●

70 Rigid tap ● ● ● ●

71 Arbitrary speed threading ○ ○ ○ ○

72

Tool function / Tool compensation

Tool offset pairs

400-pairs ●{-} ●{-} ●{-} ●{-}

73 499-pairs -{●} -{●} -{●} -{●}

74 999-pairs ○ ○ ○ ○

75 Tool offset ● ● ● ●

77 Smooth TCP X X ● ●

78 Y-axis offset ● ● ● ●

79 Tool radius/Tool nose radius compensation ● ● ● ●

80 Tool geometry/wear compensation ● ● ● ●

81 Automatic tool offset G36/G37 ● ● ● ●

82 Direct input of offset value measured B ● ● ● ●

83 Tool life management ● ● ● ●

84 Accuracy compensation function

Backlash compensation for each rapid traverse and cutting feed

● ● ● ●

85 Stored pitch error compensation ● ● ● ●

86

Editing operation

Part program storage size & Number of registerable programs

1280M(512KB)_1000 programs ● ● ● ●

87 2560M(1MB)_1000 programs ○ ○ ○ ○

88 5120M(2MB)_1000 programs ○ ○ ○ ○

89 10240M(4MB)_1000 programs ○ ○ ○ ○

90 20480M(8MB)_1000 programs ○ ○ ○ ○

91 5120M(2MB)_4000 programs ○ ○ ○ ○

92 10240M(4MB)_4000 programs ○ ○ ○ ○

93 20480M(8MB)_4000 programs ○ ○ ○ ○

94 Program protect ● ● ● ●

95 Password function ● ● ● ●

96 Playback ○ ○ ○ ○

97 Memory card program edit & operation Max 63 programs ● ● ● ●

98

Data input / output

Fast data server ○ ○ ○ ○

99 External data input ● ● ● ●

100 Memory card input/output ● ● ● ●

101 USB memory input/output ● ● ● ●

102 Automatic data backup ● ● ● ●

103Interface function

Embedded Ethernet ● ● ● ●

104 Fast Ethernet ○ ○ ○ ○

105 Others Display unit 10.4" color LCD ● ● ● ●

106Robot interface

Robot interface with PMC I/O module ○ ○ ○ ○

107 Robot interface with PROFIBUS-DP ○ ○ ○ ○


42 /

Responding to Customers Anytime, Anywhere

AMERICA EUROPE

Global Sales and Service Support Network

Technical Center: Sales Support, Service Support, Parts Support

4Corporations

198Service Post

51Technical Centers

164Dealer Networks

3Factories

PUMA MX

series

Product Preview

Basic information

Basic Structure

Cutting

Performance

Detailed

Information

Options

Diagrams

Specifications

Customer Support

Service

43 42 /

Doosan Machine Tools’ Global Network, Responding to Customer’s Needs nearby, Anytime, AnywhereDoosan machine tools provides a system-based professional support service before and after the machine tool sale by responding quickly and efficiently to customers’ demands.By supplying spare parts, product training, field service and technical support, we can provide top class support to our customers around the world.

We help customers to achieve

success by providing a variety of

professional services from pre-

sales consultancy to post-sales

support.

Customer Support Service

- On site service- Machine installation and testing- Scheduled preventive maintenance- Machine repair

Field Services

- Supports machining methods and technology

- Responds to technical queries- Provides technical consultancy

Technical Support

- Programming / machine setup and operation

- Electrical and mechanical maintenance

- Applications engineering

Training

- Supplying a wide range of original Doosan spare parts

- Parts repair service

Supplying Parts

CHINA (Yantai)

CHINA (Shanghai)

INDIA

Changwon Factory

Head Office

{ } Option

Major Specifications

PUMA MX series Description UnitPUMA

MX1600/735

series

PUMA MX1600

series

PUMA MX2100/L

series

PUMA MX2600T/ST

series

Capacity

Chuck(Left/Right) mm (inch) 6 8 10

Max. turning dia. mm (inch) 330(13.0) 540(21.3) 760(29.9)

Max. turning length mm (inch)700

(27.6)900

(35.4)1020/1520(40.2/59.8)

1540(60.6)

Bar working dia. mm (inch) 51(2.0) 65(2.6) 76(3.0)

Left SpindleMax. spindle speed r/min 6000 5000 4000

Max. spindle power kW(Hp)15/11

(20.1/14.8)22/18.5

(29.5/24.8)26/22

(34.9/29.5)

Servo driven Tailstock(except S/ST model)

Quill type - Built-in dead, MT#4Built-in dead,

MT#5

Max. thrust force kN(lbs) 3.5(786.8) 7.0(1573.6) 10.0(22480)

Right Spindle(on S/ST model)

Max. spindle speed r/min 6000 5000 4000

Max. spindle power kW(Hp)15/11

(20.1/14.8)22/18.5

(29.5/24.8)26/22

(34.9/29.5)

Milling Spindle

B-axis deg. 240(±120)

Max. spindle speed r/min 12000{18000} 12000

Max. spindle power kW(Hp)9/7.5/3.7

(12.1/10.1/4.7)18.5/15/11

(24.8/20.1/14.8)22/18.5/15

(29.5/24.8/20.1)

Tool shank - Capto C5 Capto C6{HSK A63}

ATC&Tool magazine

Tool storage ea 40 40{80}

Tool changer - Swing arm

Lower turret(on T/ST model)

For turning(Tool stations) ea 8 - - {12}

For turn-milling (Tool stations)

ea {16, BMT45P} 16, BMT45P 12, BMT55P 12, BMT65P

Max. rotary tool speed r/min {6000} 6000 5000 4000

ver. EN 190613 SU

*For more details, please contact Doosan Machine Tools.

*The specifications and information above-mentioned may be changed without prior notice.

* Doosan Machine Tools Co., Ltd. is a subsidiary of MBK Partners. The trademark is used under a licensing agreement with Doosan Corporation,

the registered trademark holder.

There is a high risk or fire when using non-water-soluble cutting fluids, processing flammable materials, neglecting use coolants and modifying the machine without the consent of the manufacturer. Please check the SAFETY GUIDANCE carefully before using the machine.

Fire Safety Precautions

Head Office22F T Tower, 30, Sowol-ro 2-gil, Jung-gu,Seoul, Korea, 04637Tel +82-2-6972-0370 / 0350Fax +82-2-6972-0400

Doosan Machine Tools America19A Chapin Rd., Pine Brook, NJ 07058, U.S.A.Tel +1-973-618-2500 Fax +1-973-618-2501

Doosan Machine Tools EuropeEmdener Strasse 24, D-41540 Dormagen, Germany

Tel +49-2133-5067-100 Fax +49-2133-5067-111

Doosan Machine Tools IndiaNo.82, Jakkuar Village, Yelahanka Hobil, Bangalore-560064

Tel + 91-80-2205-6900 E-mail [email protected]

Doosan Machine Tools ChinaRoom 101,201,301, Building 39 Xinzhuan Highway No.258 Songjiang District,China Shanghai(201612)Tel +86 21-5445-1155Fax +86 21-6405-1472

www.doosanmachinetools.com

www.instagram.com/doosan_machinetools

www.facebook.com/doosanmachinetools

www.youtube.com/c/DoosanMachineToolsCorporation

Documents

PUMA MX series - Syracuse Supply · 2019-07-18 · 02 / Product Preview Basic information Basic Structure Cutting Performance Detailed Information Options Diagrams Speciﬁcations