Supply voltage: 230VAC Supply tolerance: ± 10% Rated consumption: 0.35VA Rated frequency for as voltage: 50 to 60 Hz Duty cycle: 100% Reset time: 20 ms Input circuit Environmental conditions Permissible ambient temperature: -20°C….+55°C Storage temperature: -25°C….+70°C Transport temperature: -25°C….+70°C Relative humidity (acc. IEC 721-3-3 CLASS 3K3): 15% to 85% Output circuit Relay: 1 C/O Rated voltage: 250 Vac Switching capacity ac: 1000 VA (8A / 250V) COS = 1 Switching capacity dc: 3 A 30 Vdc Max switching capacity ac: 8 A Mechanical life: 1 x 10 6 operations Electrical life: 1 x 10 5 operations ᵠ Dimensions & weight Width: 124 mm Height: 72 mm Depth (excl. DIN-profile): 66 mm Weight: 82 gram Ordering information ISO-556B המכון לבקרה ואיכותConnections Dimensions [mm] Red LED indicates of relay energized. Display General speciﬁcations Protection class open air: IP20 Protection class enclosed (accessible front): IP40 Self-extinguishing plastic housing UL V0 acc IEC 529 Terminal : acc IEC 60947-7-1, IEC 60998-1 Terminal Capacity:1x4mm 2 without multicore cable end 1x0.5 to 2.5mm 2 with/without multicore cable end Mounting position: on DIN-rail TS 35 according to EN 50022 Mounting position: vertically ISO-556B 1-Channel Isolated Relay Output Module • 1 Form C Relay • LED Light Acvates when Relay is Energized • Screw Terminals for Field Wiring Operating The ISO 556B 1 - channel relay output board consists of 1 form C relay for eﬃcient switching of loads by programmed controller or dray contact . The relay is energized by closing contact for the appropriate relay command on the terminal block connector. The LED is light when the relay is acvated to avoid overloading and isolate your system; this board provides a screw terminal connecon. TOP 24 SK Z1 A2 A1 ISO-556B Z2 15 16 18 R SIDE 72 66 45 ISO-556B 16 18 15 Z2 Z1 ~L ~N 230VAC 24VAC Relay interface 50/60Hz 16 18 15 Z2 Z1 ~L ~N 230VAC 24VAC Relay interface 50/60Hz Controllers Ltd R sk C e r tifie d Q u ality M a n a g e m e n t S y s t e m Istitute of Quatity & Control 28 5 45 Interface Relay ISO PSK Controllers Ltd.

ISO_556B-1_new_eng.pdfMounting position: on DIN-rail TS 35 according to EN 50022 Mounting position: vertically

Download PDF Report

Upload
others
View
2
Download
0

Embed Size (px)

Citation preview

Page 1: PSKEmail: psk@psk.cc מעב הרקב גצמpsk.cc/wp-content/uploads/2016/12/ISO_556B-1_new_eng.pdfMounting position: on DIN-rail TS 35 according to EN 50022 Mounting position: vertically

Supply voltage: 230VACSupply tolerance: ± 10%Rated consumption: 0.35VARated frequency for as voltage: 50 to 60 HzDuty cycle: 100%Reset time: 20 ms

Input circuit

Environmental conditions

Permissible ambient temperature: -20°C….+55°CStorage temperature: -25°C….+70°C Transport temperature: -25°C….+70°C Relative humidity (acc. IEC 721-3-3 CLASS 3K3): 15% to 85%

Output circuit

Relay: 1 C/ORated voltage: 250 VacSwitching capacity ac: 1000 VA (8A / 250V) COS = 1Switching capacity dc: 3 A 30 VdcMax switching capacity ac: 8 AMechanical life: 1 x 106 operationsElectrical life: 1 x 105 operations

ᵠ

Dimensions & weight Width: 124 mmHeight: 72 mmDepth (excl. DIN-profile): 66 mmWeight: 82 gram

Ordering information

ISO-556B

המכון לבקרה ואיכות

Connections

Dimensions [mm]

Red LED indicates of relay energized.

Display

General speci�cationsProtection class open air: IP20Protection class enclosed (accessible front): IP40Self-extinguishing plastic housing UL V0 acc IEC 529Terminal : acc IEC 60947-7-1, IEC 60998-1Terminal Capacity:1x4mm2 without multicore cable end 1x0.5 to 2.5mm2 with/without multicore cable endMounting position: on DIN-rail TS 35 according to EN 50022Mounting position: vertically

ISO-556B1-Channel Isolated Relay Output Module

• 1 Form C Relay• LED Light Activates when Relay is Energized• Screw Terminals for Field Wiring

Operating

The ISO 556B 1 - channel relay output board consists of 1 form C relay for efficient switching of loads by programmed controller or dray contact . The relay is energized by closing contact for the appropriate relay command on the terminal block connector. The LED is light when the relay is activated to avoid overloading and isolate your system; this board provides a screw terminal connection.

TOP24

Z1A2 A1

ISO-556B

Z2 15 1618

SIDE

ISO-556B

16 18

15Z2Z1

230VAC

24VAC

Relay

inter