Page 1The Technical University of Moldova was established in
1964 and until this moment is the only higher education institution
with engineering profile in the national education system.While
strengthening the TUMs importance is revealed by significance and
contribution that it had in vocational training of specialists
through two historical periods up and after proclamation of
Republic of Moldovas Independence. Starting with 1992 and to the
present, the nomenclature of specialities at TUM was expanded from
27 to 63 specialities and the number of students from 7300 to
24300.From the moment the Process of Bologna became active and
implemented, TUM prepares specialists at four levels: bachelor
(from 4 to 5 years), masters (1.5-2 years) and doctorate (3-4
years).Interested persons will be able to continue their studies,
based on post doctorate programs. Now, at these three levels, over
17000 of students are studying, of which 14800 at licence, 2200 at
masters and around 200 at doctorate and post doctorate.Along the 50
years of activity (1964 - 2014), TUM formed above 85000 of
engineers and economists, above 1500 science and habilitatum
doctors.These technical intellectual potential created at TUM
ensure development and consolidation of the main branches of the
national economy, including: Energetics; Engineering and Management
in Machine Building; Engineering and Management in Mechanics;
Computers, Informatics and Microelectronics; Radio electronics and
Telecommunications; Technology and Management in Food Industry;
Textile Industry; Cadastre, Geodesy and Constructions; Urbanism and
Architecture; Economy and Business. Also TUM ensure research and
constructive technological design institutions with high qualified
stuff, thus creating a secure foundation for the development of
national technical culture.In Universitys Continuing Education
Centre, founded in 1994, at TUM was trained over 38000 people on
different programs of continuing education.Studies at TUM are
performed in Romanian, English, French, Russian language, including
foreign teachers contribution.The number of employees working at
TUM is, of which 870 teachers including over 410 with scientific
degree and PhD, 480 engineers and technician and over 750
staff.University owns considerable real estate patrimony, with 30
studying blocks and auxiliary services, over 350 modern
laboratories for studying and centres of computer aided design, a
plant of industrial laboratories, 14 dormitories with 4300 places
for sleeping, an imposing sports complex with 2 pitches of
international size football, 6 courts of field tennis, 4 gyms,
canteens etc. The Technical University has cooperative
relationships with more than 150 universities and research centres
from Romania, USA, Germany, France, Canada, Belgium, Great Britain,
Italy, Netherlands, Spain, Portuguese, Luxemburg, Czech, Slovakia,
Bulgaria, Russia, Ukraine etc. This relationships are for support
higher education (TEMPUS-TACIS, Erasmus-Mundus, Erasmus+) and
researches (FP-7, CRDF, SCOPES, INTAS, INCOCOPERNICUS).The
Technical University is accredited at national and European levels
and engineers association from Republic of Moldova (EAM), founded
at TUM, is member of World Federation of Engineering Organizations
(WFEO).The 50 years of anniversary of foundation, makes us sure
that through the common efforts the Technical University of Moldova
will certainly become a university of European size.
Page 4Educational offerEducation process is connected to
Bolognas principles and structure in three cycles: first cycle
bachelor; second cycle Masters; third cycle Doctorate. TUMs study
languages: Romanian, Russian, French (Francophone branch), English
(Anglophone branch).Bachelor degrees (first cycle)Are organized at
university departments and department in accordance with programs
developed properly of National Qualifications Framework in higher
education. Duration of studies in engineering specialties is 4
years, full time studies (p.c ECTS-240), and the specialities with
economic profile and Applied Informatics specialities 3 years of
studding (p.c. ECTS 180. The bachelor studies include internships
in companies, research centres in the country and abroad. The
bachelor studies are completed with bachelor exams sustaining,
which include: two samples of basic and specialized disciplines,
with mandatory support of diploma project.Masters degrees (second
cycle) Offers the opportunity to pursue university studies in cycle
II, masters, in the 43 authorized programs by the Ministry of
Education of the Republic of Moldova in areas such as:Engineering
and engineering activities (21 masters programs);Manufacturing and
processing technologies (7 masters programs);Architecture and
urbanism (9 masters programs); Economics (4 masters programs);Exact
sciences (1 masters program);Right (1 masters program);The lenght
of studies at specialities with technical profiles is 1,5 years
(ECTS - 90), with economic profile 2 years (ECTS - 120).Studies at
architectures speciality are made within 6 years (ECTS - 360).The
curricula at studies of masters include basic and specialized
subjects for advanced training in the field, theoretical and
practical courses, internships in companies, research and
laboratories centres corresponding to master program profile. The
masters programs include the research department, offers to
students the opportunity to elaborate research projects that can be
further developed in scientific theses during the doctoral
studies.The masters programs are provided with tethers, which are
owning scientific degree and title, accommodates the specialists
with advanced practices.
Page 5The Doctoral School of EngineeringStarting with 2008,
doctorates studies at TUM are performed at the Doctoral School of
Engineering, which is a university subdivision with
interdisciplinary objectives that ensuring the quality and
transparency in organization and development of doctoral studies,
contribute to enhancing the quality of scientific researches,
promoting the status and social prestige of doctorate.The Doctoral
School of Engineering organize doctorates activities at scientific
specialities in 7 Doctorate Centres, formed based on scientific
research made at the department, research centres and laboratories
empowered with doctoral activities:Tech, science-intensive
industrial products and materials in machine buildingAdvanced
technologies, science-intensive industrial products and new
materials in machine building;Modern technologies in
electrotechnics and energetics;Electronics and
informatics;Radioelectronics and communications;Processing, food
quality and safety;Architecture, construction and
design;Entrepreneurship and socio-human education in
engineering.
Preliminary examination and final support of the doctorate and
PhD thesis at TUM is performed within the 7 Scientific Specialized
Councils and 6 Scientific Seminars.During the 1992-2013 219 persons
obtained scientific doctor degree, which successfully activate at
TUM now, at high educational institutions and research centres from
this country and aboard (France, Germany, Spain, Norway, USA,
Canada, Japan, South Korea etc.), in the real sector of the
Republic of Moldova.Results of doctors scientific researches is
enjoying national and international recognition at different forums
and scientific conferences, at exhibitions and invention salons
from Romania, Russia, Germany, Czech, Canada, France, Estonia,
Austria, Bulgaria, Ukraine. Doctors participate in various
scientific projects funded by European Union, including FP7,
Orizont 2020, national institutional projects.
Page 6The International CollaborationThe International
Collaboration include all the university activities, including:
university management, training process, university consortia
formation, academic mobility of teachers and students, scientific
researches, exchange of experience, organization of symposia and
international conferences, summer schools and courses etc.The
Department of International Collaboration of the TUM contribute for
establishing partnerships with different universities, research
centres from aboard; The Department of International Cooperation of
TUM contributes to establishing partnerships universities, research
centres from aboard, informs teachers, students, doctors about the
international collaboration opportunities, participation in various
projects and programs of international cooperation, scholarships
possibilities and of international cooperation in academic field
and of scientific research; organization of academic mobility of
students, doctors, teachers and of researchers in the international
cooperation programs.TUM is the member of the Francophonie
University Agency, of the Black Sea Universities Network, of the
Engineers Association from Moldova, of the World Federation of
Engineering Organizations, of the Association of Technical
University of Commutation Independent Countries (CSI). In the
Cooperation Agreement with the Technical University N.E. Bauman,
Moscow, at TUM was opened access center to educational resources of
this university trainings.TUM participates in academic mobility
projects of student, teachers and researchers, financed by the EU
Programs Erasmus Mundus, the CEEPUS, the Erasmus +, the scientific
projects Orizont 2020, mobility programs for short time in the
cooperation and assistance program between the Ministry of
Education of Republic of Moldova and the Ministry of National
Education of Romania from 21.02.2014.
Page 7During the years, TUM signed different cooperation
agreement and bilateral cooperation relations with over 150 high
educational institutions, research centres, enterprises and
companies from Romania, France, Germany, Austria, Spain, Italy,
Great Britain, Czech, Poland, Belgium, Netherlands, other countries
of the European Union, Russia, Ukraine, Belorussia, Canada, USA,
Turkish, China, South Korea etc.In March 2010, the Committee for
nominations of European Assembly from Oxford, Great Britain,
adopted the decision to give TUM the decoration European Quality
for the ongoing effort in achieving high quality of education in
line with European standards.
Page 8Admission to studyAdmission to study is done in accordance
with the law, structure of higher education within EU and with the
Rules of Admission of the Ministry of Education of Republic of
Moldova.At TUM is performed at 64 specialities (cycle I bachelor),
43 programs (cycle II Masters) and 47 specialities (cycle III
Doctorate).
Duration of the study is:At cycle I Bachelor, at engineering
specialities 4 years (ECTS - 240), at specialities with economic
profile 3 years (ECTS - 180). Studies are finished with Bachelor
Diploma release.At cycle II Masters 1,5 and 2 years (ECTS 90 AND
120). Studies are finished with Master Diploma release.At
Architecture speciality 6 years (ECTS - 360). Studies are finished
with Integral Studies Diploma release (bachelor and master).Cycle
III Doctor 3 years. Studies are finished with Doctor Thesis in
Science release.Post doctorate studies and scientific research are
finished with Habilitate Doctor Thesis in Science release.Studies
are started at 1 September, academic year lasts 40 weeks. Forms of
study organization: full time studies, part time studies, on-line
education. Studies are performed in Romanian, Russian, English
(Anglophone branch) and franc (Francophone branch) languages.TUMs
students participate in academic mobility programs in other aboard
countries in mobility programs from EU, USA, Canada, or in
bilateral cooperation agreements between universities with
universities from CSI, with a year of duration of study. People
with high studies benefits of different programs of continuing
vocational training, including specialization, improving,
professional retraining, obtaining an additional qualification in
basic higher education, release those documents of the Ministry of
Education (diplomas retraining, additional professional
qualification based on higher education, certificate of training /
professional specialization).
Admission to studies of foreign citizens:Foreign citizens are
admitted to studies in accordance with the Rules about foreign
citizens training and stateless in educational institutions in
Moldova, based on examination of the studies files of documents
issued by Ministry of Education from citizens origin country, that
will contain: the confirmation of the documents authenticity,
length of study, academic and professional value of the education;
description of the grading system, criminal record, bank
certificate that confirm loans/ financial resources available for
the period of studies.The training of foreign citizens and of
statelessness is performed in Romanian language or, at the request
of candidates, in another language, in dependence of TUMs
possibilities.Page 9International appreciationsIn March 2010 the
Committee for nominations of the European Assembly from Oxford,
Great Britain adopted decision to offer TUM the decoration European
Quality for ongoing effort in achieving high quality of education
in line with European standards.In 2011 TUM obtained the
Certificate of conformity of Quality Management Systems of the
international standard SR EN ISO 9001:2008 accomplished by the
certificate body SIMTEX-OC, Romania the member of international
research networks IQNet.
Page 10FACULTY OF ENGINEERING AND MANAGEMENT IN ELECTRONICS AND
TELECOMMUNICATIONSFaculty was created in 1987. Around 5500
specialists in with bachelor engineer title and over 400
specialists with master title was prepared. Dean of the faculty
>>>> Sergiu Andronic Associate professor, PhD in
technical sciencesContactsTel: (+373022) 235-236E-mail:
[email protected] AND OTHER SUBDIVISIONS
Physics; Electronic Systems and Devices; Telecommunications;
Optoelectronic Systems and Communication Networks;
Radiocommunications; Micro-optoelectronic Laboratory.
ACADEMIC STAFFAt the faculty activate over 80 didactic staff
members, of which 7 university professors, DSCs, 24 university
lecturer, 28 senior lecturers, 9 lecturers, 11 assistant
lecturers.BACHELOR STUDIES PROGRAMS (CYCLE I) Electronics;
Teleradiocommunications; Optoelectronics Systems; Engineering and
Management in Telecommunications.MASTER STUDIES PROGRAMS (CYCLE II)
Electronic Systems and Communications; Maintenance and Management
of Telecommunication Networks.
DOCTORATE STUDIES PROGRAMS (CYCLE III) Matters Physics and
Technology; Optoelectronic Systems in Electronic Communications;
Electronic Engineering and Communications Technology; Management
systems, computers and networks.Page 11RESEARCH FILDS Researches on
optical radiation sensors, gas sensors, optoelectronic systems for
communication through the optical fibre and atmosphere, micro
optoelectronic devices with medical and special destination;
Fundamental researches of semiconductors, lasers based on
semiconductors; Navigation and Control Systems of satellites and
diagnostic, protection and restoration methods; Communication and
processing systems for optical information, developing of
optimizations algorithms, methods, models and analyse of
communication networks functioning, development of methods and
devices for electromagnetic field action reduction on mobile
communication users. RESEARCH LABORATORIES Micro-optoelectronic
laboratory; Optical Spectroscopy and Optical Communications
laboratory; Laboratory for Research and Application of Chalcogenide
Semiconductor Crystalline; Interdisciplinary laboratory for Studies
in Natural Sciences.
COLABORATION AND PARTENERSHIP RELATIONS
Moldtelecom S.A.; Moldcell S.A.; Orange Moldova S.A.; SIS
Solution & Service companies; ISKRATEL (Slovenia); University
centres from France, Romania and Ukraine; Telecommunication Academy
from Odessa; Technical University from Bucharest; Technical
University from St. Petersburg; State University of Informatics and
Radioelectronics from Belorussia (Minsk); Singen University
(Germany); Ferdinand Braun Institute; Weierstrass Institute of
Stochastic from Berlin; Durham University from Great Britain;
Kanazava University from Japan; International Union of
Telecommunications.
Page 12FACULTY OF ELECTRICAL POWER ENGINEERING
Faculty was created at the same time with creation of the
Polytechnic Institute in 1964. Around 9000 engineers in electro-
and power system, electromechanical and metrology fields were
prepared by this faculty. There are 30 laboratories, 6 modern
computer rooms, library with reading room, centre of technical
creativity of students.Dean of the faculty >>>> Victor
Pogora Associate professor, PhD in technical sciencesContactsTel:
(+373022) 234-187E-mail: [email protected] AND
OTHER SUBDIVISIONS Department of Power Engineering (PE); Department
of Electromechanics and Metrology (EM); Department of
Thermodynamics and Management (TM); Department of Theoretical
Foundations of Electrical Engineering (TFEE); Department of
Physical Education (PE).
ACADEMIC STAFF
At the faculty activate over 85 academic staff, an ASM
inclusively, 5 Habilitatum Doctors and university teachers, 35
Science Doctors , lecturers. BACHELOR STUDIES PROGRAMS (CYCLE I)
Power Engineering; Electromechanics; Engineering and Quality
Management; Engineering and Management In Energy; Power System.
MASTER STUDIES PROGRAMS (CYCLE II) Energy and Environment; Power
Engineering; Electrical Engineering; Engineering and Quality
Management.CENTERS University center for research and consultancy
in the field of renewable energy ENERGIE PLUS (chief Dr. , Ion
Sobor, http://www.energyplus.utm.md); Methodological and didactic,
innovation and technology transfer in metrology, standardization
and quality assurance university center MERTRONOM; Advice center of
expertise and design Power.
Page 13RESEARCH FILDS Energy economy and policy; Efficiency of
processes energy; Special ferromagnetic and electromagnetic
converters; Optimization of network operation and power systems;
Electric motors for propulsion of underwater robots; Renewable
energy sources; Traction automated electromechanical systems;
Optimal distribution of power in power system based on grid losses;
Modelling, design optimization and automated of power distribution
systems; Articles applying the coating metal by deposit in magnetic
field.
COLABORATION AND CONFERENCES
Technical and Scientific National Conference of staff, PhD and
students; International Conference SIELMEN, organized once in two
years, starting with 1997;Enterprises and organizations in the
country : Moldelectrica; Union Fenosa; RED-Nord;
InterElectroComplect; Informbusiness; TechElectro-SV; CET-1; CET-2;
Volta; Termocom; Vitanta; ElectroTehnoImport; Energo-Rotor; Agency
for Energetic Efficiency; National Institute of Standardization;
National Institute of Metrology; ASM Institute of Energetics;
Center of Applied Metrology and Certification etc.
Universities: Politechnical University from Bucharest; Technical
University Gh. Asachi from Iasi; Building Technical University from
Bucharest; University from Craiova; Technical University from
Cluj-Napoca; University Stefan cel Mare from Suceava etc.
Page 14FACULTY OF COMPUTER SCIENCE, INFORMATICS AND
MICROELECTRONICSFaculty was founded in 1967, over 11250 licensed
engineers and over 900 master students which operating in various
branches of national economy and aboard were prepared by this
faculty. Dean of the faculty >>>> Ion BALMU Associate
professor, PhD in technical sciences: ContactsTel: (+373022)
509-905E-mail: [email protected] AND OTHER
SUBDIVISIONS Department of Automation and Information Technologies;
Department of Computer Science; Department of Microelectronics and
Biomedical Engineering; Department of Social Sciences; Department
of Applied Informatics; Department of Theoretical Mechanics;
Anglophone AffiliationComputer Science
ACADEMIC STAFFAt the faculty activate 5 university professors,
48 DSCs, 5 university lecturer, 52 senior lecturers, 23
lecturers.BACHELOR STUDIES PROGRAMS (CYCLE I) Informational
Applications Management (ECTS - 120); Applied Informatics (ECTS -
120); Microelectronics and Nanotechnologies (ECTS - 240); Computers
(ECTS - 90); Informational Technologies (ECTS - 90); Automatics and
Informatics (ECTS - 90); Biomedical Engineering (ECTS - 90);
MASTER STUDIES PROGRAMS (CYCLE II) Informational Management
(ECTS - 180); Applied Informatics (ECTS - 180); Microelectronics
and Nanotechnologies (ECTS - 240); Computers (ECTS - 240);
Informational Technologies (ECTS - 240); Automatics and Informatics
(ECTS - 240); Biomedical Systems Engineering (ECTS - 240);
Informational Security (ECTS - 240).
Page 15RESEARCH FILDS Kinetic and Optical Phenomena Theory in
Massive Semiconductors ; Physics and Technology of Semiconductor
Materials; Microelectronics Systems and Biomedical Devices
Engineering; Advanced Methods and Technologies of Design and
Development of Reconfigurable Computing Applications; Unstructured
Information Processing; Effective Researching of Mathematical
Models and Methods Developing For Decision Problems; Informational
Technologies and Security.
TECHNOLOGY TRANSFER CENTERS, RESEARCH AND STUDENT TECHNICAL
CREATIVITY
International Centre Microelectronics System Engineering and
Biomedical Systems; National centre of Support of Nuclear
Safety;
NATIONAL AND INTERNATIONAL COLABORATION
Technical University from Bucharest; Technical University Gh.
Asachi, Iasi, Romania; University of Medicine and Pharmacy Gr. T.
Popa , Iasi, Romania; University from Central Florida, USA;
Technical University from Darmstadt, Germany; Stefan cel Mare
University from Suceava, Romania; Moldova State University; Academy
of Economic Studies from Moldova; Science and University from
Lille, France; Al. I. Cuza University from Iasi; Technical
University from Sankt Petersburg, Russia; LAVAL University from
Canada; Aix-Marseille University from France; Ben-Gurion University
from Beer-Sheva, Israel; Institute of Physical Engineering from
Moscow, Russia; Institute of Mathematics and Informatics from AM;
National Institute of Telecommunications from France. International
Union of Telecommunications.Page 16 FACULTY OF TECHNOLOGY AND
MANAGEMENT IN FOOD INDUSTRYFaculty was created at the same time
with creation of the Polytechnic Institute in 1964. During this 50
years around 9030 specialists in food technology and public
catering.Dean of the faculty >>>> Vladislav RESITCA
Associate professor, PhD in technical sciences: ContactsTel:
(+373022) 509-960E-mail: [email protected]
AND OTHER SUBDIVISIONS Department of Oenology; Department of Food
Technology; Department of Technology and Organization of Catering;
Department of Chemistry; Department of Modern Languages;
Francophone Affiliation Food Technology.
ACADEMIC STAFFAt the faculty activate 96 academic staff,
including 5 university professors, habilitatum doctors , 64 science
doctor, university lecturer, higher lecturers.BACHELOR STUDIES
PROGRAMS (CYCLE I)(ECTS - 240) Technology and Management of
Catering; Food Technology; Technology of Wine and Fermented
Products; Industrial Biotechnology; Engineering and Management in
Food Industry.
MASTER STUDIES PROGRAMS (CYCLE II) Quality and Food Safety;
Restaurants and Catering Management; Food Engineering; Wine
Managing; Engineering and Management in Food Industry. DOCTOR
STUDIES PROGRAMS (CYCLE II) Vegetable Food Technology; Animal Food
Technology; Technology Products and Alcoholic Drinks.
Page 17RESEARCH FILDS Study of the biologically active
substances of plant products, especially of bio natural
antioxidants; developing new methods for assessing the antioxidant
properties of food, antiradical activity in vitro evaluation of
antioxidant bio. Development of policomponents compositions of the
new plant products, manufacturing technologies developing of the
new products, assessment of physicochemical properties of the
products and technological process parameters and their influence
on the quality of finished products. Scientific researches in
oenology and development of modern technologies of wines and
spirits production. Obtaining biologically active compounds and
products from natural local sources and developing their research
through practical use in food, cosmetic and pharmaceutical .
Applied technological researches and technology transfers in milk
and meat processing industry. Food quality control and food safety.
Application of non-traditional raw materials in the production of
bakery and confectionery.
INTERUNIVERSITY COOPERATION AND PARTENERSHIPS
academic mobility of students and teachers in educational
institutions and research centers from Romania, France, Bulgaria,
Hungary, Czech, Germany, Belgium, Ukraine, Russia, USA, Canada.
Cooperation with State University from Moldova, University of
Medicine and Pharmacy Nicolae Testimiteanu , ASM Institute of
Chemistry, National Institute for Viticulture and Winemaking,
enterprises from home and abroad.Cooperation with enterprises from
food industry field: Condiviv Impex; Cardiax-Plus; Top Product;
Asconi; Chateau Varteley; Cimislia Wineries; CRICOVA; Jargur-vin;
Migdal-P; Chateau Cojusna; Milestii Mici; Romanesti; Vinaria
Bostovan; Basarabia-Nord; Farm Meat Processing; Ion Mos; Gemeni
Natromind; Harvit-Pro; Esperanza; JLC; Incomlac; Cheeses
Manufacture from Soroca; Lactis; Lapmol; Primlactis; Drancor
etc.
Page 18FACULTY OF MECHANICAL, INDUSTRIAL ENGINEERING AND
TRANSPORTFaculty , founded in 1964, it prepared over 12000
engineers, which activate in various branches of national economy
as engineers, managers, designers in enterprises from designing
areas and industrial production, transport and services from
country and aboard. Dean of the faculty >>>> Vasile
CARTOFEANU Associate professor, PhD in technical sciences:
ContactsTel: (+373022) 509-940E-mail:
[email protected] AND OTHER SUBDIVISIONS
Department of Processes, Cars and Industrial Devices; Department of
Technology of Cars Building; Department of Industrial Engineering
and Management; Department of Industrial and Product Design;
Department of Transport; Department of Car Design Bases; Department
of Descriptive Geometry, Technical Drawing, Infographics;
Department of Mathematics.
ACADEMIC STAFF
150 academic staff, including ASM academicians, 8 university
professors, habilitatum doctors , science doctor, 79 university
lecturer.BACHELOR STUDIES PROGRAMS (CYCLE I)(ECTS - 240) Industrial
Engineering Field: Technology of Car Building; Equipment and
Agricultural Car Building; Cars and Production Systems; Welding
Engineering; Industrial Design; Innovational Engineering and
Technology Transfer; Engineering and Management in Car
Building.Mechanical Engineering Field: Cars and Devices in Food
Industry; Cars and Devices in Textile Industry; Cars and
Refrigeration, Air Conditioning Systems; Equipment and Technology
of Packaging.Transport Field: Engineering and Technology of
Automobiles; Engineering and Technology of Rail; Transport
Engineering and Management; Operating technologies in
transport.
Page 19MASTER STUDIES PROGRAMS (CYCLE II)(ECTS - 90) Products
and Processes Engineering in Machine Building; Conversion Systems
Renewable Energy Engineering; Industrial Design; Products Systems
Engineering and Management; Mechanical Engineering; Safety and
Greening of the Road Transport ; Management and Exploitation of
Transport.RESEARCH FILDS Processional planetary transmission:
theory, synthesis, technologies, control; Renewable energy
conversion systems; Constitutive equations for the macroscopic
material properties based on physical relationships at microscopic
scale, Processing, reconditioning and hardening technologies of
machine parts with wear resistant electroplating; integrated
development of products and manufacturing processes; Constructive
and functional design and optimization of industrial products;
Enhance the competitiveness of enterprises of Republic of Moldova
in the context of integrated Europe; Heat and mass transfer in
thermal and drying processing of food; Refrigeration systems and
technology; transport of goods and travels, traffic safety and
environmental impact; training in computer education courses
through distance graphs; Mathematics (logic, algebra, differential
equations, stochastic differential equations, multivalent analysis,
complex analysis).
DOCTOR STUDIES PROGRAMS Car theory, mechatronics; Tribology;
Technologies, processes and equipment for processing; Processing
engineering and management (branches of industrial production);
Food industry processes and devices; Exploitation and transport
corridors study; Differential equations.
CENTERS
Development of Renewable Energy Conversion Systems; Young
Inventors; Interuniversity Scientific-Educational Center (TUM and
SU Al.Russo, Balti) Nanotechnologies Resonance; Hydraulic and
Pneumatic Shareholders; Continuing Education Centers Auto
Transport, TechnoFrig, Road Safety; National Center of Researches
and Innovation in Transport; Scientific Teaching Food Center.
INTERUNIVERSITY COOPERATION AND PARTENERSHIPS
Modern Technology, Quality and Innovation-ModTech (New face of
TMCR); International Conference; Innovative Manufacturing
Engineering-IManE. International Conference; National Seminar of
Cars Pieces Ion Draghici; National Conference Mechanics of Solids;
Engineering, Economy and Management in Transports; International
Symposia Cucuteni 5000:Redivivus; Modern Technologies in Food
Industry, International Conference.
Page 20FACULTY OF TEXTILE INDUSTRYFaculty of Textile Industry
was founded through the decision of the Government of Republic of
Moldova in 1995. During Facultys activity was prepared 2860
engineers in textile industry field.Dean of the faculty
>>>> Valentina BULGARU Associate professor, PhD in
technical sciences: ContactsTel: (+373022) 323-971E-mail:
[email protected] AND OTHER SUBDIVISIONS
Department of Fabrics and Knits Shaping Garment; Department of
Knitted Fabrics and Garment Technology; Department of Leather
Garment Modelling and Technology; Department of Fashion Design;
Department of Design and Printing Technologies.
ACADEMIC STAFF
57 academic staff, including 20 university professors, 26 senior
lecturers, science doctor, 11 university and assistants
lecturer.BACHELOR STUDIES PROGRAMS (CYCLE I) (ECTS -
240)Engineering textiles and leather options: Modelling and Woven
Garment Technology; Modelling and Leather Technology; Modelling and
Hosiery Technology.
Industrial Fashion Design;Engineering and Management in Textile
Industry;Design and Printing Technologies;Decorative Arts, Textile
Design option.
MASTER STUDIES PROGRAMS (CYCLE II)(ECTS - 90)Design and Product
Development, with options: Garments; leather and Substitutes
Clothing.Industry and Business Management in Textile
Industry;Design and Printing Technologies;Fashion and Textile
Design.
Page 21
DOCTOR STUDIES PROGRAMS Arts theory and history; Fine and
Decorative Arts.
RESEARCH DIRECTIONS/FIELDS
Constructive and technological design of products and processes
in textile industry; History and theory of design, fine and
decorative-applied arts; Cultural and historical heritage of
Republic of Moldova by developing clothing products, footwear and
leather goods, advertising products, publishing and printing.
Protection, conservation, upgrading technology and continuous
improvement of products of textile and printing industry.
SPECIFIC ACTIVITIES
Students training in scientific researches and their active
participation in technical and scientific annual conference of
students, graduate students and teachers of TUM; Periodic
organization of the international symposium "Creativity.
Technology. Marketing"; participation of teachers and students at
national and international exhibitions of fashion design art;
Participation of teachers and students at national and
international exhibitions and fashion in the field of decorative
and applied arts; Encouraging creativity and dissemination of
results.
INTERUNIVERSITY COOPERATION AND PARTENERSHIPSFaculty of Textile
Industry has collaborative relationships with higher institution
from Romania: Technical University Gh. Asachi, Iasi; Polytechnical
University, Bucharest; University from Oradea; Technical University
from Cluj-Napoca.From Ukraine: State University of Technology and
Design, Kiev; Pattern Academy from Lvov.From Russia: State
University of Design and Technology, Moscow; State University of
Design and Technology, Sankt Petersburg.
Page 22FACULTY OF URBAN PLANNING AND ARCHITECTUREFaculty of
Urban Planning and Architecture was founded in 1972, till now at
faculty was prepared 10207 specialists in engineering and
architecture field, specifit to the faculty.Dean of the faculty
>>>> Valeriu LUNGU Associate professor, PhD in
technical sciences: ContactsTel: (+373022) 774-411E-mail:
[email protected] AND OTHER SUBDIVISIONS
Department of Architecture; Department of Technology of Building
Materials and Elements; Department of Gas and Heat supply,
Ventilation; Department of Ecotechny, Environmental Management and
Water Engineering UNESCO / Cousteau; Department of Railways, Roads
and Bridges; Department of Architectural ConstructionS; Department
of Interior Design.
ACADEMIC STAFF
138 academic staff, including 5 university professors, 46 senior
lecturers, science doctor, PhDs.INTEGRATED STUDIES PROGRAMS(ECTS -
360) Architecture.BACHELOR STUDIES PROGRAMS (CYCLE I) (ECTS - 240)
Inretior design; Sculpture; Urban planning and spatial arrangement;
Enviroment engineering; Water engineering and protection;
Engineering systems of gas and heat supply, ventilation; Build
materials and articles engineering; Technology of ceramic and glass
products; Mechanical engineering in constuctions; Railways, roads
and bridges.Page 23MASTER STUDIES PROGRAMS (CYCLE II)(ECTS - 90)
Inretior design; Urban planning and spatial arrangement; Management
of engineering systems and environmental health; Microclimate
engineering installations in buildings insurance; Roads,
construction materials and mechanization.
DOCTOR STUDIES PROGRAMS
Interior design, environmental and landscape art; Urban planning
and spatial arrangement; Architecture teory and history; Materials
and constructions, elements and buildings; Engineering networks in
constructions; Technical machinery and equipments.
RESEARCH DIRECTIONS/FIELDS
Exploitation of natural resources, including waste as raw
material for production of construction materials; Ensuring hygiene
and sanitary comfort and buildings environment; Research,
collection and historical architectural heritage of the
country.
CENTERS
Specialized centers for continuing education: Heat supply, gas
and ventilation; Energy audits of buildings; Water supply and
sewerage; Highways; Polyethylene; Design school.
INTERUNIVERSITY COOPERATION AND PARTENERSHIPS
Faculty cooperates with universities and enterprises from home
and abroad: BICOMPLEX; OFTEBLIZ; Radial Plus; LAFARGE;
ApaCanalChisinau; MoldovaGaz; Ministry of Regional Development and
Construction; Ministry of Transport and Road Infrastructure; Public
associations Architecture Union from Republic of Moldova, Romania,
Russia, Ukraine, France, Hungary, Turkey, Spain, Germany, Portugal,
Georgia, Armenia, Azerbaijan, China, Canada.
Page 24FACULTY OF CADASTRE, GEODEsy AND CIVIL ENGINEERINGFaculty
was created in 1964.During 50 years was prepared 12000 constructor
engineers, geodesists, engineers, appraisers and economists,
working in various branches of the national and abroad economy.
Dean of the faculty >>>> Victor TOPORET Associate
professor, PhD in technical sciences: ContactsTel: (+373022)
773-996E-mail: toporet. [email protected] AND OTHER
SUBDIVISIONS Department of Geodesy, Cadastre and Geotechnics;
Department of Technology in Civil Engineering; Department of Labour
Safety and Environment Conservation; Department of Constructions
and Structural Mechanics; Department of Real Estate Evaluation;
Department of Patrimonial Low; Department of Real Estate
Management.
ACADEMIC STAFF
69 academic staff, including 3 university professors, 37 senior
lecturers, science doctors, PhDs.BACHELOR STUDIES PROGRAMS (CYCLE
I) (ECTS - 240) Construction and civil enginering; Engineering and
management of mining fields; Anti-fire and civil engineering
protection; Geodesy, surveying and cartography; Woodworking
technology; Real estate evaluation; Patrimonial low; Engineering
and management in constructions.
MASTER STUDIES PROGRAMS (CYCLE II)(ECTS - 90) Engineering
processes and mineral materials in construction; Structural
engineering; Anti-fire and civil engineering protection; Cadastre
and real estate development; Patrimonial low.
DOCTOR STUDIES PROGRAMS
Elements of buildings and constructions; Mechanics of deformable
solids.
Page 25
RESEARCH DIRECTIONS/FIELDS
Expertise, design and protection of normal and extreme
construction (earthquakes, subsidence, landslides, etc.); Real
estate evaluation; Investigation of landslides and methods of their
fighting; Developing norms in construction; Study of the
gravitational field of Republic of Moldova; Building
technologies.
CENTERS
Centre for Scientific Researches in combating dangerous
geological processes; Research and Development and Technology
Transfer Center "Waste Management Engineering and Construction";
Student Technical Creation Center; Continuous Training in
specialized Construction Centers; Computer Aided Design center in
building; Testing laboratory of materials, construction elements,
foundations; geodesy, topography, photometry; building
technologies; Real estate evaluation laboratories, equipped with
modern machinery.
INTERUNIVERSITY COOPERATION AND PARTENERSHIPS
Faculty cooperates with universities and enterprises from home
and abroad:
construction companies in the country; Technical Construction
University from Bucharest; Technical University Gh. Asachi, Iasi;
Technical University from Cluj-Napoca; Technical University from
Timisoara; Construction University from Odessa; Construction
University from Kiev; Higher School of Bridges and Roads from
Paris; Royal College from Great Britain; Royal Technical School
from Sweden; Applied Science University, Stuttgart, Germany;
Constrution University from Moscow etc.
Page 26FACULTY OF ECONOMY AND BUSINESSFaculty of Economy and
Business resume its activity by TUM Senate decision of 2
December.At TUM during 50 years was prepared 12800 engineers-
economists, engineers-manegers, which activate in sate entreprises,
institutions from Republic of Moldova and aboard companies.Dean of
the faculty >>>> Vasile MAMALIGAAssociate professor,
PhD in technical sciences: ContactsTel: (+373022) 774-522E-mail:
[email protected] AND OTHER SUBDIVISIONS
Department of Economic Theory and Marketing; Department of
Economics and Management in industry; Department of Construction
Economics and Management
ACADEMIC STAFF
50 academic staff, visiting professors from universities UE,
USA, in the program Fulbright.
BACHELOR STUDIES PROGRAMS (CYCLE I) (ECTS - 180)
Business and Management in Industry and Construction;
Accountancy; Marketing and Logistics. MASTER STUDIES PROGRAMS
(CYCLE II)(ECTS - 120) Business Administration; Industrial Business
Economics; Industrial Marketing.
DOCTOR STUDIES PROGRAMS
Economics and Management; Economic Theory and Economic
Policy.RESEARCH DIRECTIONS
Firms restructuring; Regional economic development.COMPETITIVE
ADVANTAGES Scholarships covered by the state budget of the Republic
of Moldova, EU funds and sponsors; Courses taught by 50 teachers
from Republic of Moldova, USA, EU etc.; Academic mobility in
Erasmus Mundus Projects; Modern infrastructure, including digital
library and Internet; Quality Management Systems - international
certificate; Teaching languages for each choose: Romanian, Russian,
English; Forms of study are choosen from: full time and part time,
with on-line elements; Free access to the entrepreneurial and
managerial assistance, career guidance and tracking system and
Businessclass Circle.Each year students are expected to job
consultants in various branches of national economy: food industry,
construction, telecommunications etc.Successful students of this
faculty crowns with beautiful results licensing examinations,
thereby able to confirm released motto by TUM rector, academician
Ion Bostan: "At TUM is studying hard!"One of the priorities of the
"marine" Project is to create a common cultural environment in the
Black Sea basin. Project partners are TUM, Naval Academy Mircea cel
Batrin, Constanta, Romania; Piri Reis, Istambul, Turkey; National
Maritime Academy from Odessa, Ukraine.
INTERUNIVERSITY COOPERATION AND PARTENERSHIPS Academy of
Economic Studies from Moldova; Commercial Cooperative University,
Moldova; Academy of Economic Studies from Bucharest; Naval Academy
Mircea cel Batrin, Constanta; Universities and Research Centres
with economic profile from EU, CSI; Collaborative Relationships
with the Companies such as Bucuria, Franzeluta, Efes Vitanta
Moldova Brewery, Cricova etc.
CENTERS Continuing education courses for specialists
enterprises; Extracurricular training courses ANTREPRENORIAT for
students engineer specializations .Page 28SPATIAL TECHNOLOGY
CENTERThe project on developing microsatellite Republic of Moldova
was launched in 2008 under a state program funded from the state
budget, as program coordinator is academician Ion Bostan.
Multidisciplinary researches are performed within 3 distinct
projects. (project scientific advisers Dr. N. Secrieru, Dr. I.
Blaj, acad. V. Canter, acad. I. Bostan).HEAD TEACHER>>>
Ion BOSTANAcademician, Univ. Prof., PhD. Tel.: +373 22 23 78
61E-mail: [email protected] DIRECTOR>>> Nicolae
SECRIERUUniv. Prof., Dr. Tel.: +373 22 225239E-mail:
[email protected] technologies targeting
industries, manufacturing, transport, communications, including
medicine. Space industry includes not just spacecraft, launchers
but also manufacturing and ground equipment, indirectly influence
extends our lives through communication at home and at work,
through safety and security.Space technology center was created in
order to reap the benefits of space technology and promote them in
rows generations of pupils, students, graduates, doctoral students
and aims to support the development of micro-nanosatellite
platforms, command terrestrial infrastructure, and
multidisciplinary laboratories for developing, testing components
and systems for satellites in simulated space environments.CTS-TUM
consists of two groups of laboratories for design, develop systems
and components and processing satellite data / images that are
endowed with equipment for remote control of the satellite ground
infrastructure: Laboratory for satellite components development;
Laboratory for development and testing attitude; Laboratory for
data and image processing; Ground station of telemetric
communications satellites; Earth station for images receiving from
satellites; Astronomical Observatory with CELESTRON telescope.Page
29PROJECT FOR MICROSATELLITE DEVELOPING "REPUBLIC OF
MOLDOVA"Objective of this project is to promote spatial technology
and to disseminate them in other areas, creating satellites of this
class. Launched project at TUM is not an exception, having the aim
of developing a microsatellite, attract more students , master and
PhD. This satellite mission, although it is an educational one,
consists in capturing Moldovan territory images by means of remote
sensing, research of radiation influential on electronic systems
and the Earth's magnetic field researches.Many teams of teachers,
graduate of the Faculty of Radio Electronics and
Telecommunications, Powerengineering, Computers and Computing,
Machine Building in Developing Subsystems Power Supply, Board
Computer, attitude control, orientation and stabilization, radio
communications and students participate in the
project.INFRASTRUCTURE GROUND SEGMENT CENCEPT OF THE SPACE PROJECTA
terrestrial infrastructure space project is based on a conception
of complex satellites monitoring. It provides telemetric
communication satellites, satellite simulation of the behavior on
simulator, visual tracking with telescope and data / images
receiving on terrestrial station with parabolic antenna controled
guided from Space Technologies Center.Concept aims at researching
and testing ways of communication and monitoring satellites.
Telemetric station ensure transmitting orders to microsatellite,
requires them various operating modes and state investigation,
telemetry, obtaining parameter values by short messages.
EARTH STATION TELEMETRY AND SATELLITE IMAGERY
RECEPTIONCommunication telemetry ground and image receivers
stations from satellites is terrestrial infrastructure of the space
projects. This infrastructure is located in TUM park-museum of art,
which enables students to familiarize all TUM specialties
project.These two distinct nodes first, the telemetric
communication, located in CTS-TUM with antennas on the roof of the
block of trials, and the second node, the receiver dish images are
located in a building with special architecture.CTS-TUM developed
an control software of telemetry and parabolic antennas and with
graphic interface of satellite positions monitoring that allow
tracking and communicating with a wide range of satellites,
including International Space Station.This infrastructure is used
extensively to promote the space technology. Firstly, in its
development and design attended a large number of students who used
the results of investigations in undergraduate thesis, master,
including the doctor.Secondly, this infrastructure is used to carry
out the practical and the laboratory works in disciplines related
to smart grids of radio communications, satellite communications,
which enable to accumulate experience to the young specialists in
this field.ASTRONOMICAL OBSERVATORY WITH AN CELESTRON TELESCOPEIn
order to expand the possibilities of space technology promoting an
Astronomical Observatory was built as a part of the ground
infrastructure of the Space Technologies Center.Gifted with
CELESTRON CGEMDX 1400 HD telescope model with CGEPRO monitoring and
computing at distance. CELESTRON CGEMDX 1400 HD telescope has an
Edge HD optical system with high power amplification of light.
Observer is used for educational purposes to study the planets,
sun, moon and other constellations, and satellites, including
astral phenomena.There was performed the connection between
Terrestrial Station, Astronomical Observatory and Space Technology
Center, a complex that will facilitate more efficient the
observation and identification of astral phenomena and artificial
satellites.Page 30UNIVERSITY CENTER FOR INFORMING AND CAREER
GUIDANCEThe center was founded in 2008, in the Tempus Project
JEP-25121-2004 Students orientation and placement, with
participation of universities from France, Greece and of social
parteners from Moldova.DIRECTOR>>>Sergiu DNUUniv. Prof.,
Dr.Tel.:+37322929215E-mail:[email protected] THE CENTER STRUCTURE
The Professional orientation and training of the contingent of
students Section; The Relations with businesses and graduates
employing in the workforce Section; Coordinating Council (staff
representatives, students, National Agency for Employment);The
center conclude cooperation Agreements between TUM and other
companies, assists high school students and students on career
success, offer information about TUM faculties and specialties,
admission to study, the situation on the labor market, offers
enterprises on internships, jobs for graduates conditions of
employment, assistance for internships, employment, communication
with employers, CV filling, intention letters writing. The center
organizes extracurricular courses for students: "Career
management", Balance of professional skills ", monitors student
engagement.
Page 31UNIVERSITY CENTER FOR CONTINUING EDUCATIONUCCE The center
was founded in 1994 through the Republic of Moldova Government
Decision. There 38000 peoples was improved, inclusively 27000
specialists from national economy and 11000 profesional educational
institutions and colleges staff. UCCE DIRECTOR >>>
Valentin AMARIEIUniv. Prof.,
Dr.Tel.:+37322235226E-mail:[email protected] Web.:
http://www.cfc.utm.mdFC CD DEP. DIRECTOR >>>Maria
VASILIEVUniv. Prof., Dr in
pedagogy.Tel.:+37322509916E-mail:[email protected] Web.:
http://www.dfccd.utm.mdContinuing education center offers services
for continuing education: thematic courses of training/
specialization lasting up to 72 hours; courses of training/
specialization for a short time (72-100 hours); courses of
training/ multidisciplinary specialization (100-500 hours);CFC
organizes for graduates of higher education institutions retraining
studies (500-1000 hours schedule) and additional professional
qualification degree (the program over 1000 hours) corresponding to
level 6 ISCED 2011, with diplomas eliberated by the Ministry of
Education. Teachers Continuing Education Department gained valuable
experience in training service of teachers in partnership with the
International Foundation "Liechtenstein Development Service" (LED)
in CONSEPT Project (Strengthening of Vocational Training) and
EdAgri (Agricultural Education), with a positive impact on
technical vocational education system.Page 32THE TECHNICAL AND
SCIENTIFIC LIBRARYThe Technical and Scientific Library was founded
in 1964, during 50 years the documentary has increased from 470,000
to 1,000,000 units, the number of users from 7000 to 14 500; 60
bibliography papers were published.DIRECTOR>>Zinaida STRATAN
Tel.:+37322509971E-mail:[email protected] Web.:
www.library.utm.md The Technical and Scientific Library , founded
in 1964, is now member of Librarians Asociations of Republic of
Moldova , partner of the Consortium ERM (Electronical Resources for
Moldova), of the SIBIMOL State Project (Integrated Informational
System of Librarians from Moldova, cooperates with university
libraries from Romania: Iai, Cluj-Napoca, Ploieti, Piteti, Sibiu,
Bacu, Bucureti, Reia, Timioara and with other informational centers
from the country and aboard.The library has a complex structure:
five service in central and 7 branches libraries at faculties,
serving 14,536 users, including 13005 of students.library
collections include 1019 000 documents in Romanian, Russian,
English, French, German languages, monographs, textbooks, courses,
handbooks, encyclopedias, dictionaries, normative documents,
special editions, newspapers, magazines, yearbooks from all fields
of science and technology.Library providing access to the local
information infrastructure, national and global integrated library
software using "Q-Series", which allows the processing of
synthetic- analytical documents (filling, classification), access
to the Electronic Catalogue of the Library in internal network and
the Internet. Through the www.library.utm.md website library
provides users with their own electronic products: Electronic
Catalogue contains 157,000 records; Electronic Library, which
includes collections "Published materials at TUM" (507 titles of
courses and teaching materials); "Electronic literature" (315
digitized books); virtual exhibition of the new acquisitions (2116
Contents scanned); bibliographic bulletin of the new publication ;
Catalogue of BTS periodicals subscribed; e-bibliographies.
Annually, the site is accessed by over a million vizitators, uusers
benefit from EBSCO databases, including over 18,200 full-text
journal titles; databases available in open-access database for
testing.Page 33TECHNICAL COLLEGETechnical College created in 1991,
was affiliated to TUM in 2000.During its activity was prepared 740
technicians in the machine build field. Technical College has
specialized laboratories, practical training workshops, library
with reading room, sports hall.DIRECTOR>>> Dumitru
VENGHERTel.:+37322477270E-mail:[email protected] Web.:
www.ct.utm.mdTRAINING PROGRAMSSpeciality Machine Tools and
Fundamental Tools with specializing in: Manufacture and Operation
of the Technology tools (qualification as technician-technologist);
Technology Providing and machines regulation - CNC tools and
industrial robots (mechanical-technician qualification). Speciality
of Technological Material Processing, specialization Materials
Processing Technology in CNC machine tools (mechanical-technician
qualification).Admission to study is done based on secondary
education. Study duration is 4 years.ACADEMIC STAFF
30 academic staff and foreman, inclusively doctors in
science.DEPARTMENTS AND OTHER SUBDIVISIONS High school discipline;
Professional disciplines and practical training; Educational
activity; Activity circles.COLABORATION AND PARTENERSHIP
Colaboration with 42 entreprises from Republic of Moldova;
Technical Creativity Contest Rube Goldberg UTM 2014 and Artistic
Creation Republican Festival -Contest Awards;Page 34STUDENTS
LIFESOCIAL SERVICES FOR STUDENTSUTM has 10 halls with 3770 beds and
othet two homes for young families. All students benefit from beds
in halls first year of studies. The percent of necessary hotel
conditions offering basic conditions of living in all halls.
Students receive computer room connected to the internet for their
individual work, which work all 24 haours of a day.Student health
services are provided by manufacturer specialized clinic, by two
medical points located on university and Botanica campuses Riscani.
ARTISTIC ACTIVITIESMusic and folk dance ensemble of TUM Tineretea,
was founded in 1965. In the 49 years of activity, Tineretea
ensemble evolves successfully in national and international
competitions and festivals. Collective achieved a series of
tournaments in 18 countries, inclusively in Austria, Bulgaria,
Croatia, Germany, Greece, Macedonia, Netherlands, Poland, Romania,
Russia, Turkey, Ukraine.Tineretea esemble is owner of multiple gold
distinctions, awards and diplomas at student national and
inernational folk festivals and competitions.TUM STUDENT UNION
ORGANIZATIONIt organizes various cultural activities and artistic
creation of the students, such as Miss, Miaster, interuniversity
competitions, TVC, "junior prom", created in November 2013studentus
" online radio for students and infomaional www.studentus.md
student portal. Young people have the possibility to fortify their
practical knowledge in programming, electronics and communications,
to act as facilitators, producers of shows, student creative team
members. At the project joined students from specialties of
journalism and literature from other universities, wich is an
example of student interuniversity cooperation. through radio and
informational portal, students debate various issues put in
educational, social and cultural fields.
Page 35BAND ORCHESTRA Founded in 1975, the orchestra includes 65
instrumentalists students from different faculties. The orchestra
repertoire varied as folk music, classical and modern composers
including songs from different countries and from all the world.
Orchestra participates at most major events organized by the
University, arts festivals and municipal and national competitions,
including the "Customs and traditions of spring-Martisor" Festival,
the Republican Festival of Brass Bands "" etc.STUDENT ORGANIZATIONS
AND AUTONOMYStudents actively participate in university governance:
20% of the members of the university senate and faculty councils
are students, master and PhD. Students are members of all
committees of the Senate and the Faculty Council. According to the
decision of the Senate, student representatives are entitled to
attend examne, to express an opinion on hiring lecturers, to come
up with proposals in the study programs. Tenants councils
participating actively in the dormitories management made up of
students, which monitors the health status of the order and in
halls. Students are members of the dorm accommodation.LOCAL GROUP
BEST/CHISINAUThe BEST is working at the TUM from 2007, is a
representative subsidiary of the "Board of European Students of
Technology" and offers students the opportunities for personal
development, relationships between students, companies and European
universitiesThis organisation contributes to the academic
environment of competitive spirit, self, teamwork, communication
and continuous development. BEST / Chisinau organized in different
activities partnership with businesses, including: local and
regional EBEC engineering competitions, contests "Rube Goldberg
machines" summer courses at UTM with annual participation of 15 to
20 students from EU universities, other competitive activities.
Page 36TUM is one of the most sporting higher education
institutions in Moldova, it has the best conditions for sports
activities: sports complex with two stadiums with natural grass and
synthetic carpet for football, athletics competitions, tennis
courts, basketball sport lands, volleyball, tennis table, chess,
dumbbell lifting, wrestling etc.The republican sports competitions,
in 18 samples, TUM occupy awards: I, II and III. The annual sports
departments improve their sports mastery over 500 students.
selectionatele TUM successfully participate in university national
championships, championships and cups Republic of Moldova. TUM
rugby team to represent Moldova at international competitions.
