Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
TRUETEMPER.COM [email protected]
TRIM GUIDE
PROJECT X
SPECIFICATIONS
PARALLEL IRONS
R+ (5.5) 0.370” 0.600” 41.0” 115
S (6.0) 0.370” 0.600” 41.0” 120
X (6.5) 0.370” 0.600” 41.0” 125
PROJECT X FLEX TIP DIAMETER BUTT DIAMETER LENGTH WEIGHT (g)
TAPERED IRONS
R (5.0) 0.355” 0.600” 41.5”-37.0” 110
R+ (5.5) 0.355” 0.600” 41.5”-37.0” 115
X (6.5) 0.355” 0.600” 41.5”-37.0” 125
S (6.0) 0.355” 0.600” 41.5”-37.0” 120
TRIMMING
Please remember the following are general rules for assembling your clubs:
• Taper tip shafts should never be tip trimmed because they are designed to discrete lenghts. Butt trim taper tip shafts to finished length.
• Butt trim shafts to finished length after tip trimming unless specified.
PROJECT X
Trim Guide
3-IRON
1.0”
2-IRON
0.5”
1-IRON
0”
4-IRON
1.5”
5-IRON
2.0”
6-IRON
2.5”
7-IRON
3.0”
8-IRON
3.5”
9-IRON
4.0”
PW
4.5”
Weight Tour
Trajectory Low
Spin Low
X+ (7.0) 0.355” 0.600” 41.5”-37.0” 130
Weight Tour
Trajectory Low
Spin Low