DELHI INSTITUTE OF TECHNOLOGY & MANAGEMENTDepartment of ECE

FORMAT FOR PREPARATION OF PROJECT/ TRAINING REPORT FOR BTECH ECE

GUIDELINES FOR STUDENTS

a) The theme / topic of the Project/ Training should be current and based on latest

technology.

b) The candidate has to give a Project/ Training brief or synopsis to the In charge, and

the guide(s) will be assigned to him related to his topic before commencing the

Project/ Training work.

c) The length of the report may be about 50 to 120 page.

d) The Project/ Training must be Hard Bounded with Black Color cover and

Golden text. (Other forms of binding will not be accepted).

e) The Project/ Training must be submitted duly signed by the Guide/HOD.

f) The Project/ Training should be neatly typed on one side and in A4 size Paper or

bond paper only.

FOLLOWING TYPING INSTRUCTIONS SHOULD BE FOLLOWED

i. 1.5 line spacing should be used for typing the general text. The general text shall be justified and typed in the Font style ‘Times New Roman’ and Font size 12.

ii. Subheading shall be typed in the Font style ‘Times New Roman’ and Font size 12 and bold.

iii. Heading shall be typed in the Font style ‘Times New Roman’ and Font size 14 and bold.

iv. Chapter heading types in times new roman with font size 18 and bold.

v. Page numbers shall start from Heading Introduction inner pages of report. Certificates and rest pages will be marked in Roman Numbers.

COMPONENTS OF A PROJECT/ TRAINING REPORT The sequence in which the Project/ Training report material should be arranged and bound should be as follows:

(a) Cover page (Hard Bound)(b) Cover page(c) Declaration(d) Certificate from department(e) Certificate from Organization (f) Acknowledgement(g) Abstract(h) Table of content(i) List of Tables(j) List of Figures(k) List of Symbols, Abbreviations and Nomenclature(l) Chapters(m) Appendices(n) Bibliography/References

Students are advised to get their Project/ Training Report checked / scrutinized from Project/ Training Guide / HOD before taking printout .

SUBMISSION OF PROJECT/ TRAINING:

Submission of Project/ Training should reach the department on prescribed date. The Project/ Training report should accompany various supporting documents as described in below paragraphs. There is no need for any synopsis at this time to be submitted for the Project/ Training chosen. The student can directly submit their Project/ Training report in prescribed format. The student is required to submit hard copies of the Project/ Training report hardly bound in Black Cover and Golden Text. Student is also required to submit softcopies on CD/DVD (full source code in working condition, Database with Dummy Data and Additional required installation files if required any, Project/ Training report, presentation).

Along with this, student should also keep the soft copy of the Project/ Training, Presentation and the Project/ Training report ready for the viva-voce and presentation if required by the Examiner.

Project/ Training Title

A Project/ Training Report

submitted in partial fulfillment of the requirements

for the award of the degree

of

BACHELOR OF TECHNOLOGY (B.TECH)

in

ELECTRONICS & COMMUNICATION

By

STUDENT NAME 1 (Class Roll No)

STUDENT NAME 2 (Class Roll No)

Under the guidance of

COLEGE PROJECT/ TRAINING GUIDE NAMEDesignation of Guide

Department of Electronics & Communication

Delhi Institute of Technology & Management

MAHARSHI DAYANAND UNIVERSITY, ROHTAK(Month Year)

Declaration

I/We, Student Name(s), hereby declare that the work which is being presented in this

Project/ Training report titled “Project/ Training Name” by me/us, in partial fulfillment of

the requirements for the award of Bachelor of Technology (B.Tech) Degree in

“Electronics & Communication OR Information Technology” , is an authentic record of

my/our own work carried out under the guidance of Name & Designation of college

Guide and Name & Designation of industrial trainer.

To the best of my knowledge, the matter embodied in this report has not been submitted

to any other University/ Institute for the award of any degree or diploma.

Name

Department of Electronics & Communication

Delhi Institute of Technology & Management

Delhi Institute of Technology & ManagementNH-1 Gannaur Sonepat, Haryana

Affiliated to Maharshi Dayanand University, Rohtak & DCRUST, Murthal

Department of ECE

Certificate

This is to certify that the Project/ Training titled “Project/ Training Name” submitted

by Student Name of B.TECH _____Semester during the year _____ for the partial

fulfillment of the requirements for the degree Bachelor of Technology in Electronics &

Communication OR Information Technology is a record of the bonafide work carried out

by him/her under my guidance and supervision.

Guide Name

Designation

Department of Electronics & Communication

Delhi Institute of Technology &Management

Hod Name

Designation

Department of Electronics & Communication

Delhi Institute of Technology &Management

Photocopy of the CERTIFICATE BY the company on company letter head

AcknowledgementIt is a pleasure to acknowledge many people who knowingly and unwittingly helped us,

to complete our Project/ Training. First of all let us thank God for all the blessings, which

carried us through all these years.

I/We express my/our gratitude to HOD Name, (designation) for his/her cooperation and

encouragement during the completion of this Project/ Training.

I/We extend my/our utmost gratitude to GuideName my/our Project/ Training guide who

has always stood by our side and guided, appreciated and encouraged us to get into more

and more ventures. Continuing the same, she enlightened us in the various stages during

the development of this Project/ Training and provided us with many insights and useful

examples, which proved to be of immense help in successful completion of this Project/

Training.

I/We are grateful to our trainer Mr. /Ms....................., for the help provided in completion

of the Project/ Training, which was assigned to me. Without his/her friendly help and

guidance it was difficult to complete the assigned task.

Last but not least, I pay my sincere thanks and gratitude to all the faculty and other Staff

Members for their support and for making our training valuable and fruitful.

Student Name1 Student Name2

Abstract

Write summary of the report in one page, include: the purpose of the study; the methodology used; and a summary of the major findings, conclusions and recommendations.

Contents

Page

Declaration.............................................................................................................ii

Certificate..............................................................................................................iii

Acknowledgement.................................................................................................iv

Abstract..................................................................................................................v

List of Figures........................................................................................................vii

List of Tables.........................................................................................................viii

Introduction.............................................................................................................1

Circuit Diagram and Description………………………………………………..3

Components Description........................................................................................9

Direction Description of Robot Movement……………………………………..42

Program Code……………………………………………………………………44

Components Used………………………………………………………………..46

Applications……………………………………………………………………...48

Limitations……………………………………………………………………….49

Future Aspects…………………………………………………………………...50

Bibliography……………………………………………………………………..51

Chapter 2 System Analysis

2.1 Limitation of Existing System……………………………………….

2.2 Proposed system with objectives……………………………………….

2.3 Feasibility Study (Economical, technical, operational)…………………

Chapter 3 System Specification

3.1 Hardware Requirements

3.2 Software Requirements

Chapter 4 Software Description

4.1 Front End (along with features)

4.2 Backend (along with features)

Chapter 5 System Design

5.1 Module Description

5.2 System Flowcharts………………………………………………….

5.3 E-R Diagrams………………………………………………….

5.4 Data Flow Diagrams…………………………………………………

5.5 UML Diagram

5.6 Database Design (tables and normalization)

5.7 Input / Output form design

5.8 Screen Design

5.9 Report Design

Chapter 5 Coding

Chapter 6 System Testing

6.1 Test Cases

6.2 Unit/system Testing

6.3

Chapter 7 System Security

Checks, control, encryption etc

Chapter 8 Snapshots

Chapter 9 Conclusions

8.1 Limitations

8.2 Scope and Future Prospects

Appendices

Bibliography

List of Figures Page

Figure 1: xyz……………………………………………………………………

List of Tables Page

Table 1: xyz………………………………………………………………………

Chapter 1

Introduction1.1 Overview

1.5 Report OrganizationThe report is organized in the following way:

Chapter 1 starts with a brief introduction of sensor network, system architecture and design

issues, difference between sensor network vs traditional networks, challenges of sensor

network, clustering in WSN and application of sensors followed by the motivation of this work.

Chapter 2, gives a detailed overview of data routing. ………………………….

Chapter 3 …………………………………………….

Appendices

Appendices are provided to give supplementary information, which is included in the main text may serve as a distraction and cloud the central theme.

• Appendices should be numbered using Arabic numerals, e.g. Appendix 1, Appendix II, etc.

• Appendices, Tables and References appearing in appendices should be numbered and referred to as appropriate places just as in the case of chapters.

• Appendices shall carry the title of the work reported and the same title shall be made in the contents page also.

Bibliography

2. For textbooks - A.V. Oppenheim and R.W. Schafer, Digital Signal Processing, Englewood, N.J., Prentice Hall, 3 Edition, 1975.

3. For papers - Devid, Insulation design to combat pollution problem, Proc of IEEE, PAS, Vol 71, Aug 1981, pp 1901-1907.