8/3/2019 Project Final Report Guidelines (Spring 2011)
1/4
TERM PROJECT -Final Report
Format for the Term Project Report
1. Title Page
For the report, you must use the Times New Roman, regular Font
12, single spacing for all themain text (except the titles, Tables,
etc.).
8/3/2019 Project Final Report Guidelines (Spring 2011)
3/4
2. Executive Summary: One to two pages, single line spacing.
Summarize the projectobjective, procedure, the results obtained and
their discussion. As a minimum, include the
followinginformation:
A. Project objective: Your motivation for choosing this project
and its objective.
B. How the model was created: Give a brief description of how
your project is modeled usingPro/ENGINEER or any other CAD
tools.
C. Physical dimensions of the model: Provide the physical
dimensions of the model
D. Design goals description: Summarize the design goals of this
project.
E. Design requirements, constraints description: Summarize the
design requirements and
constrains of this project.
F. Boundary conditions (loads and constraints) description:
Describe the magnitude of loads,where they are applied, and the
directions of the loads. Give similar details of the
constraints.
G. Summary of the results: Summarize your work. How the final
design is obtained.
3. Table of Contents: Follow a standard textbook format for
creating the Table of Contents.
4. List of Figures: Follow a standard textbook format for
creating the List of Figures.
5. List of Tables: Follow a standard textbook format for
creating the List of Tables.
6. Analysis and ResultsGive a detailed description of all the
simulation results (Mechanism or FEA) obtained. You
should include fringe plots and/or graphs to illustrate your
simulation results and explain yourfindings.
7. Other Design CandidatesPlease include other design candidates
that you have considered during this project and explain why
(in terms of the goals and constraints that you have chosen)
these candidates were not selected as thefinal design.
8. Engineering DrawingsPlease also include engineering drawings
for all the parts/components used in your final design.
