Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Programming the Heating Schedule
CONFIRM
M
1
2
CONFIRM
3
TING HEAT
G SCHEDULE
CONFIRM
5/2 SPLIT
4
5/2 SPLIT
YCOMPLETE 7 DA
INDIVIDUAL
5 6
JG Aura - Programming the Heating Schedule Issue 1 - May 2015
JG Aura - Programming the Heating Schedule Issue 1 - May 2015
Programming the Heating Schedule Continued
5
1-5
5/2 SPLIT
6-7
HOUR
Press or
To choose the MINUTES
SET PERIOD
Then press CONFIRM
SET PERIOD
To scroll across HIGH / MID / LOWHEATING LEVELS to be active during STAGE 1
HIGH MID LOW
S
Press
as shown hereSUNNY LEVEL has been chosen for PERIOD 1
High TemperatureLevel
press CONFIRM
when the preffered heating level is selected
SET PERIOD
To set the time for PERIOD 2
Press or
To choose the HOUR
Then press CONFIRM
To begin Date and Time Setup
wake up the stat by tapping any button.
then press and hold the CONFIRM button for 3 seconds
Hold down for 3 seconds
) s
Press or
To choose the MINUTES
SET PERIOD
Then press CONFIRM
SET PERIOD
Press or
To choose the desiredHEATING LEVEL to be active during PERIOD 2
Then press CONFIRM
7 8
9 10
11 12
13 14
JG Aura - Programming the Heating Schedule Issue 1 - May 2015
Programming the Heating Schedule Continued
as shown hereMOON LEVEL has been chosen for PERIOD 2
Low TemperatureMode
SET PERIOD
To set the time for PERIOD 3
Press or
To choose the HOUR
Then press CONFIRM
Press or
To choose the MINUTES
SET PERIOD
Then press CONFIRM
SET PERIOD
Press
To choose the desiredHEATING LEVEL to be active during PERIOD 3
Then press CONFIRM
as shown hereSUNNY LEVEL has been chosen for PERIOD 3
High TemperatureLevel
SET PERIOD
To set the time for PERIOD 4
Press or
To choose the HOUR
Then press CONFIRM
To begin Date and Time Setup
wake up the stat by tapping any button.
then press and hold the CONFIRM button for 3 seconds
Hold down for 3 seconds
) s
Press or
To choose the MINUTES
SET PERIOD
Then press CONFIRM
15 16
17 18
19 20
21
To begin Date and Time Setup
wake up the stat by tapping any button.
then press and hold the CONFIRM button for 3 seconds
Hold down for 3 seconds
T ) s
SET PERIOD
Press
To choose the desiredHEATING LEVEL to be active during PERIOD 4
Then press CONFIRM
22
JG Aura - Programming the Heating Schedule Issue 1 - May 2015
Programming the Heating Schedule Continued
as shown hereMOON LEVEL has been chosen for PERIOD 4
Low TemperatureLevel
For PERIODS
If no further modes are required for days 1 to 5 the time setting can be left blank for periods 5 & 6 in the schedule.
For PERIODS
To leave periods 5 & 6 inactive leave the clock blank on the display.
For PERIOD 5
then press CONFIRM
For PERIODS
and then CONFIRM
For PERIOD 6
Alternatively, if a 5th and 6th period are required, set the time, then choose the desired heating levels for each of the periods, as shown in the previous steps.
Press CONFIRM once the final period is set.
) s
The display will then
move to the
WEEKEND setup for
days 6-7.
) s
To begin Date and Time Setup
wake up the stat by tapping any button.
then press and hold the CONFIRM button for 3 seconds
Hold down for 3 seconds
) s
For the weekend setup, input a 4 or 6 PERIOD schedule for days 6-7 using the steps previously shown.
then press CONFIRM
23 24
25 26
27 28
29
To begin Date and Time Setup
wake up the stat by tapping any button.
then press and hold the CONFIRM button for 3 seconds
Hold down for 3 seconds
T ) s
As shown on this display, the system will now revert back to AUTO MODE - running the set program for that time of day.
AUTO MODE
) s
30
JG Aura - Programming the Heating Schedule Issue 1 - May 2015
Programming the Heating Schedule Continued
The HEATING SCHEDULEhas now been successfully programmed.
) s
If a COMPLETE 7 DAY setup is preffered:
After the program ( ) screen at the start of the heating schedule setup
to select the COMPLETE 7 DAY option
t
Press
) s
then press CONFIRM
Input the schedule required for the 7 days in the same way as previously demonstrated.
) s
After the last period is programmed
The system will return to AUTO MODE and the COMPLETE 7 DAY schedule will be active.
press CONFIRM
The 3rd Heating Schedule option is the INDIVIDUAL program.
If this is the preffered schedule type then input the schedule required for each individual day.
P
Once the final period has been entered for Day 7 then
The system will return to AUTO MODE and the INDIVIDUAL schedule will be active.
press CONFIRM
When the heating schedule is running in AUTO MODE and the user wishes to temporarily adjust the temperature, this can be done by using MANUAL OVERRIDE
31 32
33 34
35 36
37
To manually override the temperature whilst a heating mode is active simply
Press or
until the temperature is at the desired level
then press CONFIRM
38
JG Aura - Programming the Heating Schedule Issue 1 - May 2015
Programming the Heating Schedule Continued
MANUAL OVERRIDE
The system is now running in MANUAL OVERRIDE.
When the system is set to Manual Override the hand symbol will appear next to the temperature indicator.
M
HEAT INDICATOR
*
If the user increases the set temperature above that of the room, the HEAT INDICATOR will appear.
T
This symbol indicates the system is calling for heat.
Whenever the system is heating up this symbol will appear on the display.
HEAT INDICATORH
* H h l k ll advance rapidly until 17:00 and the Hand icon will fade out to demonstrate the e
Manual Override will last until the next period is due to run.
When the next period becomes active the system will revert back to Auto Mode.
T
39 40
41 42
The hand symbol will not be visible when the system is running in Auto Mode.
To cancel Manual Override, tap
or
This will return the set temperature to that of the active heating level.
43 44