Upload
razvan-andrei
View
220
Download
0
Embed Size (px)
Citation preview
8/9/2019 Profile Pt. Sisteme Gips Carton
1/8
METAL WORK INDUSTRY
Popeti Leordeni, os. de Centur a Municipiului Bucureti, Nr. 103, Judeul Ilfov, Cod Potal 077160
Tel.: (004) 021.5296.257; (004) 021.5296.258; (004) 021.5296.277; (004) 021.3694.653; Fax: (004) 021.5296.257
E-mail:[email protected] Web-site:www.metalwork.ro
Profile metalice pentrusisteme gips-carton
Metallic profiles for gypsum boards
8/9/2019 Profile Pt. Sisteme Gips Carton
2/8
2
2 3
PROFILE PERIMETRALEPERIMETER PROFILES
Profile metaliceMetallic profiles for gypsum board ceilings
pentru plafoane gips-carton
UD21/05
UD21/06
UD28/05
UD28/06
0,5
0,6
0,5
0,6
120
120
120
120
97
115
121
144
3000x190x220
3000x190x220
3000x190x300
3000x190x300
CodprodusItem product
Buc./paletPcs./pallet
Greutate paletWeight pallet
- Kg -
Dimensiuni paletPallet dimmension
L - H - l (mm)
Grosime tablSteel thickness
- mm -
27
3000
21/28
27
Profilele perimetrale n form de U, destinateplafoanelor false i pereilor din gips-carton, sunt elementemetalice realizate din tabl zincat, prin laminare la rece, cu grosimea de 0,5 mm sau 0,6 mm.
Utilizri:realizarea plafoanelor cu schelet de susinere metalic;placarea pereilor;montarea bordurilorde margine pentru a prelua inegalitile peretelui;nglobarea i fixarea de perei a profilelor de susinere la tavanele dingips-carton;realizarea racorduri la tavan;confecionarea mtilor i a pereilor pentru instalaii;mascarea rosturilor de dilataie.
Lungimile standard ale profilelor sunt de 3000 mmi 4000 mm. La cererea clienilor, aceste produse se potconfeciona i laalte dimensiuni. Se livreaz n pachete.
U-shaped perimeter profiles for fake ceilings and gypsum-board walls, are metallic elements made
of zinced metal sheets, cold laminated, 0.5 or 0.6 mm thick.
Uses:
metallic support structure ceilings;wall plating;mounting side rims for taking over the irregularities of t he wall;incorporating and fastening support profiles for gypsum-board ceilings;ceiling connections;making shields and walls for installations;masking dilatation joints.
The standard lengths of the profiles are 3000 mm and 4000 mm. Upon clients' request, these
products may be manufactured also in other sizes. Delivered in packages.
21
Profile metalice pentrusisteme gips-carton
Metallic profiles for gypsum boards
8/9/2019 Profile Pt. Sisteme Gips Carton
3/8
2
4 5
PROFILE PORTANTEBEARING PROFILES
15/2750/603000
15/27
CD / /
CD50/0,6/15
CD50/0,5/27
CD50/0,6/27
CD60/0,5/15
CD60/0,6/15
CD60/0,5/27
CD60/0,6/27
50 0,5 15 0,5
0,6
0,5
0,6
0,5
0,6
0,5
0,6
240
240
240
240
240
240
240
240
260
312
322
386
260
311
344
413
3000x250x400
3000x450x400
3000x450x400
3000x250x530
3000x250x530
3000x450x530
3000x450x530
3000x250x400Profilele portante tip CD, realizate din tabl zincat, prin laminare la rece, cu grosimea de 0,5 mm sau 0,6 mm,sunt profilelede susinere aleplafoanelor false, de ele fiind fixate plcile din gips-carton. n funcie deprocedeul de suspendare i ncrcare, exist diverse soluii. Dimensiunile acestora se potrivesc cudimensiunile profilelor perimetrale n form de U cu care se mbin.
Utilizri:
realizarea plafoanelor false;
mascara rosturilorde dilataie;realizarea racordurilor la tavan;
mascridin gips-carton.
Avantaje:
uor de montat (datorit sistemului de noduri flexibil, modular);economic (chiar i pentru structuri portante cu geometrii complicate);sigur(datorit proiectrii tehnice mbunatite a sistemului).
Lungimile standard ale profilelor sunt de 3000 mm i 4000 mm. La cererea clienilor, aceste produse se potconfeciona i laalte dimensiuni.Se livreaz n pachete.
CD carrying profiles, made of zinced metal sheets, by cold lamination, 0.5 or 0.6 mm thick, are profiles
used to support fake ceilings, fastened to gypsum-board plates. Depending on the suspension and
loading procedure, there are various solutions. Their sizes match the sizes of the U-shaped perimeter
profiles with which they connect.
Uses:
fake ceilings;
masking dilatation joints;
ceiling connections;
gypsum-board shields.
Advantages:
easy to mount (due to the flexible and modular node system);
economical (even for carrying structures with complicated geometries);
safe (due to the enhanced technical design of the system).
The standard lengths of the profiles are 3000 mm and 4000 mm. Upon clients' request, these products
may be manufactured also in other sizes. Delivered in packages.
CodprodusItem product
Buc./paletPcs./pallet
Greutate paletWeight pallet
- Kg -
Dimensiuni paletPallet dimmension
L - H - l (mm)
Grosime tablSteel thickness
- mm -
22
Profile metalice pentrusisteme gips-carton
Metallic profiles for gypsum boards
Profile metaliceMetallic profiles for gypsum board ceilings
pentru plafoane gips-carton
8/9/2019 Profile Pt. Sisteme Gips Carton
4/8
2
6 7
TRAVERSA CLIPCROSSING PATCH
Traversa CLIP pentru profilele CD este elementul metalic realizat prin laminare la rece din tabla zincata cu
grosimea de 0,6 mm, utilizat pentru fixarea profilelor CD.
Se livreaza n pachete.
The CLIP cross for the CD profiles is the metallic element achieved through the cold rolling process of
the hot deep galvanized steel, thikness 0.60 mm and it is used for the CD profiles cliping.
Delivered in packages.
PROFILE OMEGAOMEGA TYPE PROFILES
Profilele Omega, destinateplafoanelor false i pereilor din gips-carton, sunt elemente metalice realizate dintabl de oel zincat, prin laminare la rece, cu grosimea de 0,5 mm sau 0,6 mm.Se utilizeaz la placarea pereilor cu panouri din gips-cartonpentru a prelua inegalitile peretelui.Lungimile standard ale profilelor sunt de 3000 mm i 4000 mm. La cererea clienilor, aceste produse se potconfeciona i laalte dimensiuni.Se livreaz npachete.
Omega profiles, for fake ceilings and gypsum-board walls, are metallic elements made of zinced metal
sheet, by cold lamination, 0.5 or 0.6 mm thick.
Used in plating walls with gypsum-board panels for taking over the inequalities of the wall.
The standard lengths of the profiles are 3000 mm and 4000 mm. Upon clients' request, these products
may be manufactured also in other sizes. Delivered in packages.
Omega 20/05
Omega 20/06
0,5
0,6
500
500
671
805
3000x170x700
3000x170x700
CodprodusItem product
Buc./paletPcs./pallet
Greutate paletWeight pallet
- Kg -
Dimensiuni paletPallet dimmension
L - H - l (mm)
Grosime tablSteel thickness
- mm -
20
84
45
23 24
TR CLIP 50 0,6 20 600 4000x155x710
CodprodusItem product
Buc./paletPcs./pallet
Greutate paletWeight pallet
- Kg -
Dimensiuni paletPallet dimmension
L - H - l (mm)
Grosime tablSteel thickness
- mm -
50
4000
Profile metalice pentrusisteme gips-carton
Metallic profiles for gypsum boards
3000
Profile metaliceMetallic profiles for gypsum board ceilings
pentru plafoane gips-carton
8/9/2019 Profile Pt. Sisteme Gips Carton
5/8
92
8
Profile metaliceMetallic profiles for separating walls
pentru perei despritori
GHIDAJE"U""U" TYPE GUIDES
UW50 UNI/05
UW50 UNI/06
UW75 UNI/05
UW75 UNI/06
UW100 UNI/05
UW100 UNI/06
0,5
0,6
0,5
0,6
0,5
0,6
120
120
120
120
120
120
165
198
200
240
235
283
3000x360x330
3000x360x330
3000x360x450
3000x360x450
3000x360x610
3000x360x610
Ghidajele n form U sunt elemente metalice confecionate din tabl zincat, prin laminare la rece, cu grosimeade 0,5 mm sau 0,6 mm i utilizatepentru scheletul pereilor despritoridin gips-carton.
Utilizri:
primirea i transmiterea ncrcrilor din scheletul metalic de susinere al pereilor de gips-carton, ctrestructura de rezisten a cldirii;realizarea structurilor pentru perei de compartimentare,cu fixarea n podea i plafon;placarea pereilor.
Lungimile standard ale profilelor sunt de 3000 mm i 4000 mm. La cererea clienilor, aceste produse se potconfeciona i laalte dimensiuni.Se livreaz n pachete.
U guides are metallic elements made of zinced metal sheet, by cold lamination, 0.5 or 0.6 mm thick, used
for the structure of gypsum-board partitioning walls.
Uses:
receiving and transmitting loads from the metallic structure for supporting gypsum-board walls, to the
resistance structure of the building;
making structures for partitioning walls, by fastening to the floor and ceiling;
wall plating.
The standard lengths of the profiles are 3000 mm and 4000 mm. Upon clients' request, these products
may be manufactured also in other sizes. Delivered in packages.
CodprodusItem product
Buc./paletPcs./pallet
Greutate paletWeight pallet
- Kg -
Dimensiuni paletPallet dimmension
L - H - l (mm)
Grosime tablSteel thickness
- mm -
353000
50/75/100
25
Profile metalice pentrusisteme gips-carton
Metallic profiles for gypsum boards
8/9/2019 Profile Pt. Sisteme Gips Carton
6/8
112
10
UW50 DIN/05
UW50 DIN/06
UW75 DIN/05
UW75 DIN/06
UW100 DIN/05
UW100 DIN/06
0,5
0,6
0,5
0,6
0,5
0,6
120
120
120
120
120
120
179
215
214
257
250
300
3000x470x330
3000x470x330
3000x470x450
3000x470x450
3000x470x610
3000x470x610
"U" TYPE GUIDES ACCORDING TO DIN
GHIDAJE "U" NORMA DIN
Ghidajele n form U norma DIN sunt elemente metalice cu alte dimensini ale laturilor exterioare,confecionate din tabl zincat, prin laminare la rece, cu grosimea de 0,5 mm sau 0,6 mm i realizate pentruscheletul pereilor despritori din gips-carton.
Utilizri:
primirea i transmiterea ncrcrilor din scheletul metalic de susinere al pereilor de gips-carton, ctrestructura de rezisten a cldirii;realizarea structurilor pentru perei de compartimentare,cu fixarea n podea i plafon;placarea pereilor.
Lungimile standard ale profilelor sunt de 3000 mm i 4000 mm. La cererea clienilor, aceste produse se potconfeciona i laalte dimensiuni.Se livreaz n pachete.
DIN-norm U guides are metallic elements, with other sizes of the ext erior sides, made of zinced metal
sheet, by cold lamination, 0.5 or 0.6 mm thick, used for the structure of gypsum-board partitioning walls.
Uses:
receiving and transmitting loads from the metallic structure for supporting gypsum-board walls, to the
resistance structure of the building;
making structures for partitioning walls, by fastening to the floor and ceiling;
wall plating.
The standard lengths of the profiles are 3000 mm and 4000 mm. Upon clients' request, these products
may be manufactured also in other sizes. Delivered in packages.
CodprodusItem product
Buc./paletPcs./pallet
Greutate paletWeight pallet
- Kg -
Dimensiuni paletPallet dimmension
L - H - l (mm)
Grosime tablSteel thickness
- mm -
403000
50/75/100
Profile metaliceMetallic profiles for separating walls
pentru perei despritori
26
Profile metalice pentrusisteme gips-carton
Metallic profiles for gypsum boards
8/9/2019 Profile Pt. Sisteme Gips Carton
7/8
132
12
MONTANI"C""C" TYPE BEAMS
CW50 UNI/05
CW50 UNI/06
CW75 UNI/05
CW75 UNI/06
CW100UNI/05
CW100UNI/06
0,5
0,6
0,5
0,6
0,5
0,6
195
234
230
276
265
318
120
120
120
120
120
120
3000x410x340
3000x410x340
3000x410x500
3000x410x500
3000x410x645
3000x410x645
CW stanchions, structural profiles for gypsum-board partitioning walls, are metallic elements made of
zinced metal sheet, by cold lamination, 0.5 or 0.6 mm thick. They are mounted in UW guides, being the
vertical stanchions of the structure of gypsum-board walls. The gypsum-board plates are fastened to
the CW stanchions whose length matches the interior heights used in buildings, thus, the quantity of
waste from cutting the profiles to the size is minimum. In order to achieve perfect joining, without special
elements, the sizes of the CW stanchions match those of the UW guides.
C stanchions are telescopic (they can be joined and extended without other accessories). The standard
lengths of the profiles are 3000 mm and 4000 mm. Upon clients' request, these products may be
manufactured also in other sizes. Delivered in packages.
Montanii CW, profile de structur pentrupereii despritori din gips-carton, sunt elemente metalice realizatedin tabl zincat, prin laminare la rece, cu grosimea de 0,5 mm sau 0,6 mm. Acetia se monteaz n ghidajeleUW, fiind montaii verticali ai scheletului pereilor din gips-carton. Plcile din gips-carton se fixeaz demontanii CW a cror lungime urmrete nlimile interioare uzuale la cldiri, astfel, cantitatea pierderilordintierea la dimensiune a profilelor s fie minim. Pentru o mbinare perfect, fr elemente speciale,dimensiunile montanilor CW se potrivesc cu cele ale ghidajelor UW.Montanii de tip C sunt telescopici (se pot mbina si prelungi fr alte accesorii). Lungimile standard aleprofilelor sunt de 3000 mm i 4000 mm. La cererea clienilor, aceste produse se pot confeciona i laaltedimensiuni.Se livreaz n pachete.
CodprodusItem product
Buc./paletPcs./pallet
Greutate paletWeight pallet
- Kg -
Dimensiuni paletPallet dimmension
L - H - l (mm)
Grosime tablSteel thickness
- mm -
Profile metaliceMetallic profiles for separating walls
pentru perei despritori
27
Profile metalice pentrusisteme gips-carton
Metallic profiles for gypsum boards
50/75/10040
37
3000
8/9/2019 Profile Pt. Sisteme Gips Carton
8/8
15214
"C" TYPE BEAMS ACCORDING TO DIN
MONTANI"C" NORMA DIN
CW50 DIN/05
CW50 DIN/06
CW75 DIN/05
CW75 DIN/06
CW100 DIN/05
CW100 DIN/06
0,5
0,6
0,5
0,6
0,5
0,6
212
254
247
297
283
339
120
120
120
120
120
120
3000x475x340
3000x475x340
3000x475x500
3000x475x500
3000x475x645
3000x475x645
Montanii CW norma DIN, profile de structur a pereilor despritoridin gips-carton, sunt elemente metalicerealizate din tabl zincat, prin laminare la rece, cu grosimea de 0,5 mm sau 0,6 mm. Acetia se monteaz nghidajele UW norma DIN, fiind montaii verticali ai scheletului pereilor din gips-carton. Plcile din gips-cartonse fixeaz de montanii CW norma DIN a cror lungime urmrete nlimile interioare uzuale la cldiri, astfel,cantitatea pierderilordin tierea la dimensiune a profilelor s fie minim. Pentru o mbinare perfect, frelemente speciale, dimensiunile montanilor CW norma DIN se potrivesc cu cele ale ghidajelor UW norma DIN.Montanii de tip C norma DIN sunt telescopici (se pot mbina si prelungi fr alte accesorii).Lungimile standard ale profilelor sunt de 3000 mm i 4000 mm. La cererea clienilor, aceste produse se potconfeciona i la alte dimensiuni. Se livreaz n pachete.
DIN-norm C stanchions, structural profiles for gypsum-board partitioning walls, are metallic elements
made of zinced metal sheet, by cold lamination, 0.5 or 0.6 mm thick. They are mounted in DIN-norm UW
guides, being the vertical stanchions of the structure of gypsum-board walls. The gypsum-board plates
are fastened to the DIN-norm CW stanchions, whose length matches the interior heights used in
buildings, thus, the quantity of waste from cutting the profiles to the size is minimum. In order to achieve
perfect joining, without special elements, the sizes of the DIN-norm CW stanchions match those of the
DIN-norm UW guides.
DIN-norm C stanchions are telescopic (they can be joined and extended without other accessories). The
standard lengths of the profiles are 3000 mm and 4000 mm. Upon clients' request, these products may
be manufactured also in other sizes. Delivered in packages.
CodprodusItem product
Buc./paletPcs./pallet
Greutate paletWeight pallet
- Kg -
Dimensiuni paletPallet dimmension
L - H - l (mm)
Grosime tablSteel thickness
- mm -
Profile metaliceMetallic profiles for separating walls
pentru perei despritori
28
Profile metalice pentrusisteme gips-carton
Metallic profiles for gypsum boards
50/75/10040
37
3000