16
I used the text tool to create my masthead. I then chose from a variety of fonts until I was happy with the final one. Text tool.

Production of School Magazine Contents Page

Embed Size (px)

DESCRIPTION

 

Citation preview

  • 1. Text tool. I used the text tool to create my masthead. I then chose from a variety of fonts until I was happy with the final one.

2. Text tool.Again for the contents title I used the texttool but made it smaller than the mastheadbecause it is not important although thereaders attention is still attracted to it. 3. Thirdly for this column on my contentspage I again used the text tool onQuark. I had to change some of thefont sizes and colours to make themstand out. 4. For this chequered red andwhite design I saved the pictureoff Google images and insertedthem off the image tool. 5. To create this column for my contentspage I again used the text tool. Butchanged the font size and colour forthe heading and the numbers to makethem stand out to the reader. 6. To insert my main image on my contents page I used the image tool. To do this I had tochoose the frame shape, right click on import picture, choose the picture from my folderand upload it into the frame. 7. To insert this secondary image onto my contents page I had totake the same steps as my main image but make the image alot smaller to do this I had to press the Ctrl Shift and F buttonsat the same time so that I could adjust the size. 8. I then repeated this step for the secondimage. 9. And again for the third. 10. And for the final fourth image. But for thefourth image I had to edit it in Photoshopbefore I uploaded it as it had a whiteframing around it and would not fit into theframe. 11. I used the text tool to insert the pagenumbers on my contents page. I stuckwith the same colour as the numbers inthe columns and also kept the number initalics. 12. I then did the same for the page numbers onmy secondary pictures. 13. And the same for mysecond picture. 14. Third picture. 15. And finally my fourthpicture. 16. For the final piece ofmy contents page itwas the quote fromthe main article of mymagazine. To get thisonto my contents pageI inserted it from thetext tool and kept it inthe same font as therest of the contentspage. I changed thecolour of the quote toblack so it would standout to the magazinereader.