Product Range - Smart Process · We have also sourced and produced other products that complete our product range such ... • Voltage Sensing relays/Timers and ... Pulsed output

www.smartprocess.co.ukvisit us online at

More than just a bright idea.

Product Range

Smart process & Controls LTD have a full range of products that cater for most industries and applica-tions. We have partnered with Revalco (Italy) and have a sole UK distribution agreement. Revalco has become a key supplier to our portfolio and with our 15 years experience in this particular field and their 30 years we do not only supply standard products but have modified existing designs to suit the UK market. Revalco take full advantage of the latest technologies to produce modern high quality products taking into consideration the requirements of each industry.

We have also sourced and produced other products that complete our product range such as a LCD backlit multifunction power meter, MID certified kWh meters, split core current transformers and three phase current transformers.

We are a young and progressive company that have already reacted to different trends and demands within the UK market. As an example of our flexibility we have also manufactured our own pre-wired “plug and play “distribution panels that can come as standard with pulsed outputs, or have the ability to be remotely monitored without having to wire into any existing networks, it is as simple as connecting the current transformers and mounting the panel on the wall and you are ready to go.

Please note this is a short form catalogue and we have only showcased some of the more commonly sold products, however our range is extensive and if you require an item that is not showing in this bro-chure then please contact us as we can accommodate most product requests within the below catego-ries:

Full list of product range:

• Current Transformers - page 2• kWh Meters -page 3 to 4• MID Certified kWh Meters -page 3• Multifunction Power Meters -page 5• Analogue and Digital indicators - page 6• Earth Leakage Devices - page 7• Transducers - page 8• Voltage Sensing relays/Timers and Astronomical timers- page 8• Surge Arresters - page 9• Pre-wired Distribution Panels (With or without remote monitoring capabilities)- page 10

www.smartprocess.co.ukMore than just a bright idea.

Contact UsSmartProcess & Control Ltd 40 High Street, Canvey, Essex, SS8 7SEtelephone : 01268 511908 | fax : 01268 511510 email : [email protected]: www.smartprocess.co.uk

1

Current Transformers

TCSN8V

STCK23

TCSN10V3

STCK58

TCSN103

STCK88 STCK35

TCSN3D TCSN22D22mm diameter apertureW=43mm, H=67mm, D=43.8mmAvailable ratios 50,60,80,100,120,125,150,200,250 and 300A-/1A or -/5A secondary on requestBuilt in terminal Protection

Current Transformer, 82x32mm Vertical windowW=102mm, H=142mm, D=63mmAvailable ratio’s 400,500,600,800,1000,1200,1250,1500,1600,2000 and 2500ABuilt in terminal protectionSupplied with clamping screwsHigh Accuracy

Primary current range 100 to 400A ( 5A Secondary)Window Aperture : 20 x 30mmBuilt-in Terminal cover

105x32mm Vertical window apertureare W=115mm, H=165mm , D=50mmAvailable ratio’s 500,600,750,800,1000,1200,1250,1500,1600,2000,2500,3000 and 4000ABuilt in terminal protectionSupplied with clamping screwsHigh Accuracy

Primary current range 250 to 1000A (5A Secondary)Window aperture 50 x 80mmBuilt in terminal cover

102x55mm Horizontal window apertureare W=138mm, H=158mm, D=61mmAvailable ratio’s 500,600,750,800,1000,1200,1250,1500,1600,2000,2500 and 3000ABuilt in Terminal ProtectionSupplied with clamping screwsHigh Accuracy

Primary current range 250 to 1000A (5A Secondary)Window aperture 80x80mmBuilt in terminal cover

Availible primary ra-tios:100,150,200,250,300,400,500 and 600A Internal diameter aper-ture 35mm 5A secondary (Availble with 1A on request) Accuracy 0.5,1 and 3 depending on the primary-load Built in terminal cover

30.5x11mm Horizontal windowW=49mm, H=71mm, D=43mmAvailable ratio’s 100,125,150, 200, 250,300,400,500 and 600ABuilt in terminal protectionBuilt in DIN rail clipHigh Accuracy

TCSN43221mm diameter apperture,20x10 and 30x10mm horizontal bar, 20x10mm Vertical barW=60mm, H=72mm, D=43mmAvailable ratio’s 50,60,80,100,120,125,150,200,250,300,400,500 and 600ABuilt in terminal protectionBuilt in DIN rail clipHigh Accuracy

TCSN551x21mm and 41x22.5mm Horizon-tal window (up to 600A) 51x11mm Horizontal window (800 to 1250A)W=70mm, H=87mm, D=43mm Available ratio’s 200,250,300,400,500,600, 800,1000,1200 and 1250ASupplied with clamping screwsHigh Accuracy

TCSN12125x58mm Horizontal window apertureW=175mm, H=182mm, D=64mmAvailable ratio’s 500,600,800,1000,1200,1250,1500,1600,2000,2500,3000 and 4000ABuilt in terminal protectionSupplied with clamping screwsHigh Accuracy

TCSN880x30mm horizontal windowW=105mm, H=112mm, D=55mmAvailable ratio’s 400,500,600,800,1000,1200,1500,1600,2000,2500 and 3000ABuilt in terminal protectionSupplied with clamping screwsHigh Accuracy

TCSN12V127x32mm Vertical window aperture W=107mm, H=187mm, D=63mmAvailable ratio’s 800,1000,1200,1250,1500,1600,2000,2500,3000,4000ABuilt in terminal protection.Supplied with fixing screwsClass 0.5 Accuracy

Single Phase

CT325 CT335 CT3453 x apertures at 15.5 x 30mmPrimary current 60 -200ASecondary Terminal M4 screws25mm Hole CentresClass 1Housing Material Self Extinguish-ing Nylon

3 x apertures at 21x25mmPrimary current 60 -250ASecondary Terminal M4 screws35mm Hole CentresClass 1Housing Material Self Extinguish-ing Nylon

3 x apertures at 31x31mmPrimary current 250 to 600ASecondary Terminal M4 screws45mm Hole CentresClass 1Housing Material Self Extinguish-ing Nylon

Three Phase

Split Core

2

kWh Meters

DDS353

ME162

5235

DDS353-C

MT375

E470

DTS353

MT174 ME372

5219B

1RCEM1 Smart X21245A Direct connectedSingle Phase230V 50/60Hz +/- 10% measured voltage1 DIN Module housingPulsed outputLCD display

MID B+D Certified45A Direct Connected Single Phase230V +/- 10% measured voltage1 DIN ModulePulsed outputLCD display

Approved to BS EN61036: 1996, Class 1 & 2Single Phase NetworkVoltage : 230VDirect connection 20 – 100A, 220V – 240V. Option: 2 S0 or OPTOMOS pulse outputs

Nominal Voltage Un 220-240V, 120VSingle Phase Network100A Direct ConnectedOFGEM Approval Number 986Voltage Range 80-115%UnVoltage Withstand 415V ContinuousNominal Frequency 50/60HzPulsed output 1 imp per Wh (1000 per kWh)Frequency Variation +/- 2%

MID B+D Certified100A Direct Connected Single Phase230V +/- 10% measured voltage4 DIN Module Pulsed outputLCD display

120A Direct connected or CT oper-ated (MT375-CT)Three Phase NetworksMID ApprovedPulsed Output on request Import/Export EnergyTariff control inputSmall size modern designIntegrated GSM/GPRS Modem

Single Phase NetworkMeasuring Range 0,5 – 10 (100)AMeasuring Accuracy Class A or BDisplay 4 starburst characters and 7 segment characters with backlightNetwork 1 phase 2 wireReference Voltage / Frequency 220 - 240v / 50HzOperating Voltage Range -20% to + 15%Power Consumption 0.22VA @ 20A;

MID B+D Certified100A Direct Connected or 5A Ct operatedThree Phase230V +/- 10% measured voltage7 DIN Module Pulsed outputLCD display

Multi-tariff c\w internal time switch120A direct connected or 5 Amp, (current transformers required) OFGEM Approved Import/Export Energy Tariff control input Small size modern design Pulse outputMax DemandLoad Profile

100A Direct Connected Single Phase Network OFGEM Approved Import/Export Energy Tariff control input Small size modern design GSM/GPRS Modem Cost Effective Accuracy class: 2 or 1 Voltage range: 1.15 Un Max. current: 85A or 100A Reference voltage: 230V

OFGEM ApprovedSystem Voltage 230/400VImport & Export readingsThree Phase NetworksDirect connected 100APulsed outputVoltage Burden <2W <10VACurrent Burden <0.5VA @ Imax <1VAFrequency 50Hz +/-5%

30A Direct connected Single Phase230V 50/60Hz +/- 10% measured voltage1 DIN Module housingPulsed output5+2 digit mechanical display

1RCEM263D63A Direct connected Single Phase230V 50/60Hz +/- 10% measured voltage2 DIN Module housingPulsed output6+1 backlit LCD display

IRCEM41D-/5A CT operated (5-10-15-20-25-30-40-50-60-80 x10 and x100 max 4000A)Single phaseSelf-Supplied 230V +/- 10% measured voltage4 DIN ModulePulsed Output6+1 backlit LCD display

IRCETM354D-/5A CT operated (5-10-15-20-25-30-40-50-60-80 x10 and x100 max 4000A)Three PhaseSelf-Supplied 230V +/- 10% measured voltage4 DIN ModulePulsed output6+1 backlit LCD display

Standard - Din Rail Mounted

MID Certified - Din Rail Mounted

ISKRA kWh Meters

Landis+Gyr kWh Meters

DDS353-BMID B+D Certified100A Direct ConnectedSingle phase230V +/- 10% Measured voltage1000 imp/kWh pulsed outputRS485 Modbus OutputLCD Display 5+2= 99999.99

EDMK-MIDMID B+D CertifiedCurrent reading via external trans-formers .../5A or .../1AWrong connection display signalDIN Rail format in 3 moduleOptional 72x72mm Panel mounting via seperate adaptor2 x Pulsed output (EDMK-ITF-C-PULSE-MID)RS485 Modbus + 1 x Pulsed output (EDMK-IFT-C-RS485-MID)

3

kWh Meters (continued)

A1100 A100

Ampy 5188A

AMR Package for Remote Monitoring

Accuracy Class 1 or Class 2, EN62053-21Accuracy Class A or Class B, EN 50470-3:2006 (DIN IrDA only)Ofgem ApprovedDirect connection 20 – 100A, 220V – 240VPulsed Output (optional)Active & Reactive Energy Measurement .kWh import

Accuracy - Class 1Ofgem Approved Cost effective 100A Direct connected 3 phase 4 wire, or 3 phase 3 wire( upon request) Pulsed outputLarge figure display (9.8mm)Extensive security dataIrDA (Infrared Data Association) output for transmitting billing, security and status data

AS230EN 62053-21: Accuracy Class 1 or Class 2EC Directive 2004/22/EC (MID): Class A or BSingle Phase100A Direct ConnectedkWh, kvarh and kVAh Energy MeasurementImport/ExportModular WAN/LAN CapabilityHome Automation Network allowing access to: Gas, Water, Other Meter Data, Customer DisplayComprehensive Tariff StructureMaximum Demand Registration

A1140Accuracy kWh Class 1 or Class 2, kvarh Class 2 or Class 3Single and Three Phase Networks100A Direct ConnectedComprehensive tariff structureLarge digit (9.8 mm register digits) Liquid Crystal DisplayIEC 62056-21 (formerly IEC 61107) optical communications portInternal clock and calendar with battery back-up15 years product life

A1700CT and VT operated = A1700CTDirect Connected = A1700-DCThree phase networksMID ApprovedCommunications via optical port or communications modulePlug in modules for extended functionalityComprehensive tariff structure2 line, multilingual dot matrix displayInstantaneous instrumentation values2 module slots for extended functional-ityAccuracy Class 0.2s, 0.5s (CT only), 1 or 2Concealed Utility/Reset pushbutton

Elster

Meteronline is an on-line energy monitoring system provided by Meter Manager Ltd since

2005. The service collects meter readings, processes this information and then delivers easy

to read reports via a web based interface and email. Applications include, Renewable Energy

Generation Monitoring, Energy Management, Remote Monitoring and Tennant Billing.

Features include

• Readings wirelessly retrieved via mobile communication technology

• Readings available online 24/7

• View daily, weekly, monthly and yearly energy profiles via online charting

• Automate Microsoft Excel compatible meter reading reports

• Receive automatic alerts and reports via email

• Automated billing / reading statement capabilities

• Register additional meters quickly and easily online

• Complete online energy monitoring and management system

• One annual subscription includes all communications and data handling

Meteronline’s inherent scalability provides a complete managed metering system that can

handle a large number of meters from almost any location. Nevertheless Meteronline can also

be used cost effectively with only a single meter connected.

The Ampy 5188A is a single phase Pre-payment kWh meter. This meter works from a Magnetic card

which offers a safe simple and efffective solution for “pay as you go” electricity.this elimanates debts

that may occur as a result of non-payments of bills. This technolgy is proving very effective in the leisure

industries. We also supply the Magnetic cards and have a secure unique coding system which protects

the landlord and prevents the cards being purchased and sold on the black market. Electricity cards are

available in £1.00, £5.00, £10.00, £20.00 and £50.00 value. The ‘Meterman’ Programming Card enables

the Site Manager to change the meter’s charging parameters using the push buttons on the front of the

meter. The following step-by-step instructions will guide you through the process for using the ‘Meter-

man’ Programming Card to adjust the required parameters.

4

Multifunction Meters

1RAEM4C-IMPSmartRail X835DIN Rail Mounted 4 ModuleHigh Definition backlit display5A or 1A input CT inputSingle or three phase networksDual pulsed output and built in RS485 (Modbus)Measured Parameters are: Current, Current (THD), Current Demand, Voltage, Voltage THD, Frequencey, Power, Maximun Power Demand, Power Factor, Active and Re-active Energy Imported and exportedClass 1 (Active energy)

4 DIN ModuleSingle Phase and 3 Phase networks1RAEM4C-IMP (5A CT operated with pulsed output)1RAEM463C-IMP (63A Direct con-nected with pulsed output)Relay Pulsed output (1imp/1kWh) Suitable for BMS systems Includes the following Parameters: Current, Voltage, Frequency, Active Power, Total Active Power, Reac-tive Power, Total Reactive Power, Apparent power, Total Apparent Power, Power Factor, Total Power Factor, Total Active Energy Import (resettable), Total Active Energy export (resettable), Total Reactive Energy (resettable), Voltage phase sequence indication.

1RAEM4C485 1RAEM4C-IMP-C100 1RAEM4C485-C1004 DIN ModuleSingle Phase and 3 Phase networks1RAEM4C485 (5A CT operated with RS485 Modbus)1RAEM463C485 (63A Direct con-nected with RS485 Modbus)Modbus RTU outputFREE SOFTWARE FOR REMOTE MONITORINGIncludes the following Parameters: Current, Voltage, Frequency, Active Power, Total Active Power, Reac-tive Power, Total Reactive Power, Apparent power, Total Apparent Power, Power Factor, Total Power Factor, Total Active Energy Import (resettable), Total Active Energy export (resettable), Total Reactive Energy (resettable), Voltage phase sequence indication.

4 DIN ModuleSingle phase and 3 Phase networksSupplied with 100A miniature clip on current transformers Relay Pulsed output (1imp/1kWh) Suitable for BMS systems Includes the following Parameters: Current, Voltage, Frequency, Active Power, Total Active Power, Reac-tive Power, Total Reactive Power, Apparent power, Total Apparent Power, Power Factor, Total Power Factor, Total Active Energy Import (resettable), Total Active Energy export (resettable), Total Reactive Energy (resettable), Voltage phase sequence indication.

4 DIN ModuleSingle phase and 3 Phase networksSupplied with 100A miniature clip on current transformers Modbus RTU outputFREE SOFTWARE FOR REMOTE MONITORING Includes the following Parameters: Current, Voltage, Frequency, Active Power, Total Active Power, Reac-tive Power, Total Reactive Power, Apparent power, Total Apparent Power, Power Factor, Total Power Factor, Total Active Energy Import (resettable), Total Active Energy export (resettable), Total Reactive Energy (resettable), Voltage phase sequence indication.

2RAE72L4C4852RAE72L4C72x72mm Panel mounted230V 50/60Hz Auxiliary supply.-/5A CT operated3 Phase networkRS485 Modbus RTU outputFREE SOFTWARE FOR REMOTE MONITORING Includes the following parameters: Ph-N and Ph-Ph Voltage, Average voltage of phases, Current, Power Factor, Total Power Factor, Apparent Power, Active Power, Reactive Power, Frequency, Import/Export Total Active Energy (resettable), Reactive Total En-ergy (resettable), Total Working Time (resettable), Phase SequenceEthernet option available on requestProfibus option available on request

72x72mm Panel mounted230V 50/60Hz Auxiliary supply.-/5A CT operated3 Phase networkPulsed output (2RAE72L4C)Relay Pulsed output (1imp/1kWh) Suitable for BMS systems Includes the following parameters: Ph-N and Ph-Ph Voltage, Average voltage of phases, Current, Power Factor, Total Power Factor, Apparent Power, Active Power, Reactive Power, Frequency, Import/Export Total Active Energy (resettable), Reactive Total En-ergy (resettable), Total Working Time (resettable), Phase SequenceEthernet option available on requestProfibus option available on request

Smart X825 Smart X83596x96mm Panel MountedDepth from the panel 55mm-/1A or -/5A CT operatedSingle phase or three phase networks2 Digital inputsDual pulsed output Plug in terminalsIncludes the following parameters: Current ,Neutral Current,Ph-Ph & Ph-N Voltage (min/max current & voltage),Frequency, Power Factor, Active Power, Re-Active Power, Active Energy (kWh), Re-active Energy (Kvarh),Max Demand, Peak Demand, THD (2nd-60th)Class 1 kWh (EN62053-21)Class 0.5 kW & kVA (IEC 60688)Class 0.2 Amps/Volts (IEC 60688)Class 0.5 Neutral current (IEC 60688)

96x96mm Panel MountedDepth from the panel 55mm-/1A or -/5A CT operatedSingle phase or three phase networks2 Digital inputsRS485 Modbus RTU OutputPlug in terminalsIncludes the following parameters: Current ,Neutral Current,Ph-Ph & Ph-N Voltage (min/max current & voltage),Frequency, Power Factor, Active Power, Re-Active Power, Active Energy (kWh), Re-active Energy (Kvarh),Max Demand, Peak Demand, THD (2nd-60th)Class 1 kWh (EN62053-21)Class 0.5 kW & kVA (IEC 60688)Class 0.2 Amps/Volts (IEC 60688)Class 0.5 Neutral current (IEC 60688)

Din Rail Mounted

Panel Mounted

Smart X835mV1RAEM4C485IMP0.396x96mm Panel MountedDepth from the panel 55mm0.33Vac inputSingle phase or three phase networks2 Digital inputsDual pulsed output ( 1 for active and 1 for reactive energy)RS485 Modbus (RTU)Plug in terminalsIncludes the following parameters: Current ,Neutral Current,Ph-Ph & Ph-N Voltage (min/max current & voltage),Frequency, Power Factor, Active Power, Re-Active Power, Active Energy (kWh), Re-active Energy (Kvarh),Max Demand, Peak Demand, THD (2nd-60th)Class 1 kWh (EN62053-21)Class 0.5 kW & kVA (IEC 60688)Class 0.2 Amps/Volts (IEC 60688)Class 0.5 Neutral current (IEC 60688)

4 DIN Module0.33VAC inputRelay Pulsed output (1imp/1kWh) Suitable for BMS systemsRS485 Modbus (RTU) outputIncludes the following Parameters: Current, Voltage, Frequency, Active Power, Total Active Power, Reactive Power, Total Reactive Power, Apparent power, Total Apparent Power, Power Factor, Total Power Factor, Total Active Energy Import (resettable), Total Ac-tive Energy export (resettable), Total Reactive Energy (resettable), Voltage phase sequence indication.

Retro Fit

Smart X835S72x72mm Panel Mounted-/1A or -/5A CT operatedSingle phase or three phase networksDual pulsed output ( 1 for active and 1 for reactive energy)RS485 Modbus RTU outputIncludes the following parameters: Current,Nuetral Current,Ph-Ph & Ph-N Voltage (min/max current & voltage),Frequencey, Power Factor, Active Power, Re-Active Power, Active Energy (kWh), Re-active Energy (Kvarh),Max Demand, Peak Demand, THD (2nd-60th)Class 1 kWh (EN62053-21)Class 0.5 kW & kVA (IEC 60688)Class 0.2 Amps/Volts (IEC 60688)Class 0.5 Nuetral current (IEC 60688)

SCT19/32/51Minature Split Core Current Trans-formersSCT19 (19x19mm Window Aperture) 100A,125A or 150ASCT32 (32x32mm Window Aperture) 200A,300A,400A and 500ASCT51 (51x51mm Window Aperture) 600A,800A,1000A,1200A and 1500A

5

Instrumentation

ERF-48

2RID48SV

ERF-72

2RID72SV

ERF-96

2RID96SV

ERI-72

2RID72SA

ERI-48

2RID48SA

48x48mm/53mm DepthOperating frequency: 40/60HzRanges:1-1.5-2.5-4-5-5-10-15-20-25-30-40-50-60A direct input-/1A or -/5A CT operatedMotor rated available0-600V inputClass 1.5mA meters available on request

48x96mm (Depth 49mm)Single PhaseClass 0.5 +/- 2 digit referred to the end of scale0-100Hz Frequency4 digit 14mm LED display-/5A CT operatedScale range 5 to 9999AAvailable auxiliary suppys:230VAC, 24VAC, 110VAC, 110VDC and 220VDC

48x48mm/53mm Depth45-65HzBurden 1.5VAAvailable supply options:110,230 and 400VClass 0.5

48x96mm (Depth 49mm)Class 0.5 +/- 2 digit referred to the end of scale0-100Hz Frequency4 digit 14mm LED display0-500VACAvailable auxiliary suppys:230VAC, 24VAC, 110VAC, 110VDC and 220VDC







ERI-96

2RID96SA



Analogue indicators- AC Ammeters/Voltmeters

Digital Indicators- AC Ammeters:

Analogue indicators – Frequency

Digital Indicators-AC Voltmeter

6

Earth Leakage Relays / Toroids

1RDT101RDT1Trip current adjustments: 30,100,300,500mA/1, 3A Time delay adjustment 0-4 sec 230V 40/60Hz Auxiliary supply 1 DIN module Signalling LED 1 N/O Contact 10A 250VRemote reset available on request

Built in Toroid Trip current adjustment 30mA, 300mA,3A 50mA, 500mA, 5A 100mA,1A,10ATime delay adjustment 2ms (de-fault) - 33ms -0.5s-1.5s-3s230V 40/60Hz Auxiliary supply1 DIN module with 18mm diameter apertureSignalling LED1 N/O contact 10A 250VRemote reset available on request

1RDT3S 1RDT30E 1RDT430ETrip current range 30-300-500mA Time delay 0.2-0.5-3-5 seconds Insulation test 2.5KV for 1 minute Output 1 changeover contact 10A 250V Fault LED / Healthy LED / Reset But-ton / Test Button

DIN 3 Module Trip current range 30-300-500mA/1-3-30A Time delay 0-1-2-3-4 seconds Insulation teat 2kV at 50Hz for 1 minute (relay aux supply) Output 1 Changeover contact 10A 250V Fault LED / Healthy Supply LED / Reset Button / Test Button

DIN 4 ModuleTrip current range 30-300-500mA/1-3-30ATime delay 0-1-2-3-4 secondsInsulation teat 2kV at 50Hz for 1 minute (relay aux supply)Output 2 Changeover contact 10A 250V ( One for earth fault and one pre-alarm threshold)Remote resetFault LED / Healthy Supply LED / Reset Button / Test Button

Din Rail Mounted

2RDT4848 2RDT7272 2RDT72 2RDT96265E48x48mm Panel Mounting Trip Current Range 30-300-500mA /1-3-30A Time delay 0-1-2-3-4 sec Max Burden 1.5W Output: 1 relay with 2 change over contacts 8A 250V insulated Fault LED/ Healthy supply LED/ Reset button/Test button

72x72mm Panel Mounting (92mm Depth) Trip Current Range 30-300-500mA /1-3-30A Time delay 0-1-2-3-4 sec Max Burden 1.5W Output: 1 relay with 2 change over contacts 8A 250V insulated Fault LED/ Healthy supply LED/ Reset button/Test button

72x72mm Panel Mounting Trip Current Range 30-300-500mA /1-3-10-30A Time delay 0-1-2-3-4 sec Max Burden 1.5W Output: 1 change over contact 8A 250V insulated Fault LED/ Healthy supply LED/ Reset button/Test button

96x96mm Panel MountingTrip Current range 30-100-150-200-300-500mATime delay 0-10 secondsOutput 2 change over contacts 8A 250V insulated (one for Earth Leak-age and one for pre-alarm)Fault LED/ Healthy supply LED/ Reset button/Test buttonRequires core balance transformer

Panel Mounted

TOR3 TOR6 TOR8 TOR11The TOR3 Core Balance Transformer is to be used in conjunction with our range of Earth Leakage Relays and has 35mm diameter aperture, they consist of high quality magnetic core which detects fault currents

The TOR6 Core Balance Transformer is to be used in conjunction with our range of Earth Leakage Relays and has 60mm diameter aperture, They consist of high quality magnetic core which detects fault currents

The TOR8 Core Balance Transformer is to be used in conjunction with our range of Earth Leakage Relays and has 80mm diameter aperture, They consist of high quality magnetic core which detects fault currents

The TOR11 Core Balance Trans-former is to be used in conjunction with our range of Earth Leakage Relays and has 110mm diameter aperture, They consist of high quality magnetic core which detects fault currents

Core Balance Transformers / Toroids

7

Transducers

Voltage Sensing relays and Timers

Multifunction Timer 1CMDTO

Phase Failure Relay MAK51B

Voltage Sensing Relay MG21DH

AC Voltage Transduce 1COR2V230-500V

AC Current Transducer 1COR2A230-5ACInput 0-5A AC Auxiliary supply 230VAC Class 0.5 Response time 300 ms Dimensions: 2 DIN modules Selectable outputs: 1-5-10VDC and 1-5-10-20-4/20mADC Transparent sealable front cover

Functions: (1) Signal ON delay (2) Cyclic ON/OFF (3) Cyclic OFF/ON (4) Signal OFF Delay (5) Signal OFF/ON (6) Accumulative Delay on Signal (7) Impulse ON/OFF (8) Leading Edge Impulse (9) Trailing Edge Impulse (10) Leading Edge Bi-stableSupply Voltage 12 - 240 VAC/DCSupply Variation -15% to +10%Frequency 50/60HzPower Consumption (Max.) 2VATiming Range 0.1s to 100hReset Time 200 ms (Max)Relay Output 1 C/0Contact Rating 6A @ 240 VAC / 5A @ 24 VDC (Resistive)Operating Temperature -10deg to +60degStorage Temperature -15deg to +70degLED Indication Green LED - Power ON, Yellow LED - Relay ONEnclosure Flame Retardant UL94 - V0Dimension (W x H x D) ( in mm) 18 X 85 X 65Weight (unpacked) 70gMounting Base / DIN Rail

Supply Voltage 415VACFrequency 50/60 HzPower Consumption (Max.) 15 VATrip Settings Phase Loss YesTrip Settings Phase Sequence YesTrip Settings Phase Asymmetry 40 V (+/- 10 V)Trip Settings Hysteresis 10 to 8 VTime Delay - On Delay 2 s (+/- 2 s)Time Delay - Trip Time (OFF Delay) 7 s (+/- 2 s)Output - Relay Output 1 C/OOutput - Contact Rating 5A (For `NO’) & 3A (For `NC’) @ 250 VAC / 28 VDC (Resistive)LED Indication Red - Relay ON (Healthy)Operating Temperature (-10deg to +50deg)Storage Temperature (-20deg to +65deg)Enclosure Flame Retardant UL 94 - V0Dimension ( W x H x D) ( in mm) 36 X 90 X 60 Weight (unpacked) 120gMounting Base / DIN rail

Supply Voltage 208 - 480 VAC, (3 Phase 3 Wire)Frequency 50/60 HzPower Consumption (Max) 3.5 VASettable Nominal Voltage 208 - 220 - 380 - 400 - 415 - 440 - 480 VACTrip Levels Phase Loss YesTrip Levels Phase Sequence YesTrip Levels Phase Asymmetry 10% FixedTrip Levels Under Voltage (-5% to -25%)Trip Levels over Voltage (+5% to +25%)Time On Delay 5 sDelay Trip Time (OFF Delay) 0.5 to 15 s (selectable)Output - Relay Output 1C/OOutput Contact Rating 5A @ 250 VAC / 30 VDC (Resistive)LED Indication DC - 13 Red LED: Supply healthy - Continuous ON, Phase Reserve - FlashingLED Indication UV - Red LED: Under Voltage - Continuous ONLED Indication OV - Red LED: Over Voltage - Continuous ONLED Indication Asymmetry - Continuous ONLED Indication All LED’s - Phase Fail - Continuous OFF, Blinking - Pot changed during running conditionsMounting Base / Din rail

Input 0-500VACAuxiliary supply 230VACClass 0.5Response time 300 msDimensions: 2 DIN modulesSelectable outputs: 1-5-10VDC and 1-5-10-20-4/20mADCTransparent sealable front cover

Active Power Transducer 1CORPAClass 0.53 Phase 3 wire Balanced (1CORPA20) 3 Phase 4 wire Balanced (1CORPA40)3 phase 3 wire Unbalanced (1CORPA30)3 phase 4 wire unbalanced (1CORPA50) -/5A CT operated (1A on request)230/400VAC Measured voltageSelectable bi-directional outputs (1,5,10VDC, 1,5,10,20,4-20mA)Selectable auxiliary supply 230/400VACAvailable on request RS485 MOD-BUS RTU output

Re-active Power Transducer 1CORPRClass 0.53 Phase 3 wire Balanced (1CORPR20) 3 Phase 4 wire Balanced (1CORPR40)3 phase 3 wire Unbalanced (1CORPR30)3 phase 4 wire unbalanced (1CORPR50) -/5A CT operated (1A on request)230/400VAC Measured voltageSelectable bi-directional outputs (1,5,10VDC, 1,5,10,20,4-20mA)Selectable auxiliary supply 230/400VACAvailable on request RS485 MOD-BUS RTU output

Voltage Sensing Relay MG73BHSupply Voltage 240VAC (1 Phase & 3 Phase, 4 Wire)Frequency 50/60 HzPower Consumption (Max) 5 VA Trip Settings Phase Loss YesTrip Settings Phase Sequence YesTrip Settings Phase Asymmetry 10%Trip Settings Under Voltage 55% to 95%Trip Settings Over Voltage 105% to 125%Trip Settings Hysterisis 7 V (+/- 2 V)Time Delay On Delay 0 to 15 s (Selectable)Time Delay Trip Time (OFF Delay) 5 sRelay Output 2 C/OOutput - Contact Rating 5A @ 250 VAC / 28 VDC (Resistive)LED Indication Seperate Indications for Power ON, UV and OV; ON: Phase Reverse; Blink: Phase AsymmetryOperating Temperatures -10deg To +55degStorage Temperatures -25deg To +70degEnclosure Flame Retardant UL 94 - V0Dimensions (W x H x D) (in mm) 36 X 90 X 60Weight (unpacked) 120gMounting Base / DIN rail

Astronomical Time Switch T2DDT7T2DDT7 is ideal for Outdoor and Street lighting applications with easy manual override and keypad lock features. It also boasts 6 years battery reserve with a 12/24 hour display format.

8

Surge Arresters

BS 7671 Wiring Regulations & Surge Protection

1RAOSAFEC75PV

1RAOSAFE300PV

1RAOSAFE600PV

1RAOSAFE1000PV

1RAOSAFE1200PV

1RAOSAFECPV surge arrester has a protective element which consists of a varistor and a gas tube with thermic protection. It is suitable for installation in sub distribution panels or close to the main device offering protection against indirect and direct lightning overvoltages. It is category IEC/EN/VDE class II - Type 2/C. Thermoplastic case UL94-VO self-extinguishing. Optical signal or fault. Protection modes (+) + (-) -PE, (+) - PE / (-) - PE. MOV protective element. High Surge discharge rating Imax=40kA. Standards IEC-61643-1, UTE 61740-51, EN50539-11.Back up fuses are not required.

• Max Continuous Voltage Ucpv (+ PE,-PE) -75V• Max Continuous Voltage Ucpv (+ -) - 150V• Protection Voltage <0.6kv• Max Discharge Current Imax (8/20us) - 40Ka• With remote control (1RAOSAFEC-T75PV)


• Max Continuous Voltage Ucpv (+ PE,-PE) -300V• Max Continuous Voltage Ucpv (+ -) - 600V• Protection Voltage <1.7kv• Max Dischage Current Imax (8/20us) - 40Ka• With remote control (1RAOSAFEC-T300PV)


• Max Continuous Voltage Ucpv (+ PE,-PE) -600V• Max Continuous Voltage Ucpv (+ -) -1200V• Protection Voltage <2.2kV• Max Discharge Current Imax (8/20us) - 40Ka• With remote control (1RAOSAFE-T600PV)

1RAOSAFECPV surge arrester has a protective element which consists of a varistor and a gas tube with thermic protection. It is suitable for installation in sub distribution panels or close to the main device offering protection against indirect and direct lightning overvoltage’s. It is category IEC/EN/VDE class II - Type 2/C. Thermoplastic case UL94-VO self-extinguishing. Optical signal or fault. Protection modes (+) + (-) -PE, (+) - PE / (-) - PE. MOV protective element. High Surge discharge rating Imax=40kA. Standards IEC-61643-1, UTE 61740-51, EN50539-11.Back up fuses are not required.

• Max Continuous Voltage Ucpv (+ PE,-PE) -1000V• Max Continuous Voltage Ucpv (+ -) -2000V• Protection Voltage <2.8kV• Max Discharge Current Imax (8/20us) - 25Ka• With remote control (1RAOSAFE-T1000V)


• Max Continuous Voltage Ucpv (+ PE,-PE) -1200V• Max Continuous Voltage Ucpv (+ -) -1200V• Protection Voltage <4.6kV• Max Discharge Current Imax (8/20us) - 20kA• 3 DIN Modules• With remote control (1RAOSAFE-T1200V)

Devices for protection against overvoltage (surge protection) - new section 534

Both lightning strikes and electrical switching can inject what are called transient overvoltages into installations. Transient voltages are usually only a few micro seconds in duration. However their peak value can reach 6 kV.

Current lightning protection standards BS EN62305 recognise the need for protection due to our reliance on electrical and electronic systems as well as the risks to personnel and buildings. Where required by BS EN 62305, SPDs shall be installed in accordance with the new key Section 534 of BS 7671:2008 Amendment 1.

The consequence of transient overvoltage’s can be damaging and disastrous. Transient overvoltage protectors or Surge Protective Devices (SPDs) should be installed on mains power supplies and data, signal & communications lines. The new regulations where published on the 1 July 2011 and came into effect on the 1 January 2012. This means installations designed after 1 January 2012 will need to comply with amendment

9

Pre-Wired Distribution Boards

PWSmartX825-1

PWSMARTX825-2

The PWSMARTX825-1 is a cost effective pre-wired distribution board complete with a DIN 96x 96 multifunction power meters complete with dual pulsed output. The meter is pre-installed and the PWSMARTX825-1 comes with supply terminals. The enclosures are designed to minimise installation time required on site. All internal components are wired to easily accessible terminals and come with comprehensive installation and configuration instructions. All panels are pre-tested prior to despatch to ensure trouble free installation and commissioning. We can also offer a remote monitoring package so the end client can access data from the meter. It can be hardwired in to the network or you can use GSM technology making it a simple installation process.

• Only quality enclosures are used• 300x200mm Panel• Terminals for supply and CT connection as standard• Individually fused supply and reference voltages connected to each meter (allows individual meter isolation/maintenance/replacement if necessary)• Mains protection/isolation of all components included (6A TP MCB)• Optional panel isolator• Optional remote monitoring solution using Netbiter technology. Can be hardwired into the network or use GSM technology.

The PWSMARTX825-2 is a cost effective pre-wired distribution board complete with two DIN 96x 96 multifunction power meters complete with dual pulsed output. The meter is pre-installed and the PWSMARTX825-2 comes with supply terminals. The enclosures are designed to minimise installation time required on site. All internal components are wired to easily accessible terminals and come with comprehen-sive installation and configuration instructions. All panels are pre-tested prior to despatch to ensure trouble free installation and commissioning. We can also offer a remote monitoring package so the end client can access data from the meter. It can be hardwired in to the network or you can use GSM technology making it a simple installation process.

• Only quality enclosures are used• 300x400mm Panel• Terminals for supply and CT connection as standard• Individually fused supply and reference voltages connected to each meter (allows individual meter isolation/maintenance/replacement if necessary)• Mains protection/isolation of all components included (6A TP MCB)• Optional panel isolator• Optional remote monitoring solution using Netbiter technology. Can be hardwired into the network or use GSM technology

The Netbiter easy connect system for remote monitoring

• No Firewall issues• No static IP needed• No IT expertise needed• No VPN required• No programming

Netbiter is a small remote gateway that connects to the RS485 Modbus from our Smart X835 meter with the Netbiter Argos server over Ethernet. This makes it pos-sible to remotely monitor and control Modbus devices and networks. The device is mounted within the panel and no additional software or hardware is required. It is a fraction of the cost of traditional software that is offered in today’s UK market

Data management Features:

• Monitor & control data• Alarm management (email/sms/etc)• Historical data logging and graphical trend graphs• Reports (weekly/monthly/etc)• Map overview and tracking• Web service interface to exchange data to other websites.

10

www.smartprocess.co.ukMore than just a bright idea.

Contact UsSmartProcess & Control Ltd 40 High Street, Canvey, Essex, SS8 7SEtelephone : 01268 511908 | fax : 01268 511510 email : [email protected]: www.smartprocess.co.uk

Documents

Product Range - Smart Process · We have also sourced and produced other products that complete our product range such ... • Voltage Sensing relays/Timers and ... Pulsed output