INBUREX

PARTNERSWORLDWIDE

U S A

DEUTSCHLAND

INTERNATIONAL

ATEXATEXExplosion ProtectionExplosion Protection

Providing Integrated SolutionsFor Your Fire and Explosion

Protection Needs

ATEXATEXExplosion ProtectionExplosion Protection

Our CommitmentTo Provide Cost Effective Product Options to Meet Your Protection Needs

ATEXATEXExplosion ProtectionExplosion Protection

Our PolicyIf We Don’t Make Or Supply the Right Product for Your

Protection Needs . We Will Get It for You at Cost Effective

Prices.

USAATEX

Explosion Protection, L.P.

CLICK ON ANY ICON

TO MOVE FORWARD

Click on ATEX LOGO

To Move One Level Backward

Preventive Fire and Explosion ProtectionPreventive Fire and Explosion Protection

Explosion Isolation ( Disengagement )Explosion Isolation ( Disengagement )

Explosion Venting SystemsExplosion Venting Systems

Explosion Suppression SystemsExplosion Suppression Systems

OUR RANGE OF SUPPLY

PREVENTIVE FIRE AND EXPLOSION PROTECTION

EARLY FIRE DETECTION AND EXPLOSION PREVENTION SYSTEM

INFRA RED SPARK DETECTION

INERT GAS PROTECTION SYSTEMS

RAPID EXTINGUISHMENT SYSTEMS

PREVENTIVE FIRE AND EXPLOSION PROTECTION

EARLY CO FIRE DETECTIONFOR INDIRECT FIRED DRYERSAND SYSTEMS WITHOUT CO PRODUCTION

ATEX SENSE 2000 EARLY PRE-FIRE EXPLOSION PREVENTION SYSTEM FOR ALL DRYER SYSTEMS

Atex Early CO Detection system provides the user with an early method of detecting a fire overheat condition has occurred. Using sophisticated detection equipment the system can sense small amounts of CO release signaling for manual or auto-matic response. An optional water spray system can extinguish the fire condition and prevent the potential explosion from occurring. When a suppression system is present the system can save costly false discharges from occurring

ATEX EARLY CO FIRE DETECTION AND EXPLOSION PROTECTION

SYSTEM

MORE DETAILS

Control Panel

CO Detector

ATEX CO DIFFERENTIALEARLY PRE-FIRE DETECTION AND EXPLOSION PROTECTION SYSTEM

Control Panel

CO Detector

SeeCO Early

Warning System Presentation

ForMore Details

Atex SENSE 2000 Pre-Fire Detection system provides the user with an early method of detecting fire overheat conditions. Using sensitive detection equipment the system senses small amounts of decomposition gases signaling for manual or automatic response. An optional water spray system can extinguish the fire condition and prevent the potential explosion from occurring. When a suppression system is present the system can save costly false discharges from occurring

ATEX SENSE 2004EARLY PRE-FIRE DETECTION AND EXPLOSION PROTECTION SYSTEM

MORE DETAILS

Control Panel

CO Detector

ATEX SENSE 2004EARLY PRE-FIRE DETECTION AND EXPLOSION PROTECTION SYSTEM

Control Panel

CO Detector

SeeSense 2004

PresentationFor

More Details

SPARK DETECTION AND SUPPRESSION SYSTEMS

ATEX Spark Detection Systems provide excellent protection against the occurrence of an explosion. By using sophisticated infra-red detection the units detect a spark or ember traveling through ductwork and release a water or agent spray extinguishing the potential of explosion development in a process vessel downstream.

Click Here For Further Details

DUSTCOLLECTORSensor with Three

IR Probes

ExtinguishingNozzles and

Control Valves

SparkSensorOR

FUTURE SPOT FOR

INERT GAS PROTECTION SYSTEMS

FUTURE SITE OF

RAPID EXTINGUISHMENT SYSTEMS

EXPLOSION ISOLATION(DISENGAGEMENT)

QS VALVE (QUICK SLIDING VALVE)

VENTEX VALVE

HSK VALVE (CHECK VALVE)

EXPLOSION DIVERTER

HRD FLAME BARRIER

QUICK SLIDINGGATE VALVE

The ATEX quick sliding gate valve provides for a positive disengagement of process components isolating the explosion progress. The unit is available in most standard versions with a unique non-pyrotechnique solenoid actuation valve option. The unit allows the operational testing in anger providing a true test of system functioning without requiring high cost recharge components. Valves without this true test feature are always subject to ware and binding that will compromise the valve without indication. The ATEX solenoid operated valve provides true assurance of system operation. More Information

ControlPanel

PressureDetector

GateValve

VENTEX EXPLOSIONISOLATION VALVE

Ventex isolation valves provide a totally mechanical means of isolat-ing an explosion’s propagation. The units are available with optional electrical activation when used with an automatic detection system.

The cost effective units can be mechanically reset without costly replacement parts during normal operation. Maintenance can be performed by plant personnel. High cost maintenance contracts are not required. More Details

MechanicalVentex Valve

NextApplication

Detector ControlledVentex Valve

ControlPanel

Only Valve Rated For ST3 DustsKST > 300 bar-m/sec

VENTEX EXPLOSIONISOLATION VALVE

See RICOVentex ValvePresentation

forTypical Detailed

Installations

FUTURE LOCATION OF INFORMATION ON

HSK VALVE (CHECK VALVE)

EXPLOSION DIVERTER VALVES

Thorwesten diverter valves are used to divert the flow of the explosion from other equipment in process piping. They are available in two configurations the standard unit with a rupture disc as means of pressure relief. And,

a re-closable unit that provides increased fire containment and low cost maintenance and service. The unit uses a cushioned opening which allows the it to re-close and seal off the protected area.

Explosion Diverter

HRD Flame IsolationBarrier Systems

Chemical flame isolation barriers are available for the isolation of flame fronts. Pressure or optical detectors send signals to electronic control equipment.

The control unit sends a signal to each suppressor to extinguish the advancing flame front.

Control PanelSuppressor

Sensor

HRD Flame IsolationBarrier Systems

See ATEX

Suppression 2002

Presentation

For

More Details

EXPLOSION VENTING SYSTEMS

BURSTING DISC (STANDARD VENTS)

EXPLOSION DOORS

REFLEX EXPLOSION VENT PANELS

Q-PEx ( FLAMELESS VENTING SYSTEMS)

Bursting Discs(Standard Vents)

ATEX provides explosion vents to meet a variety of applications. The domed composite vents are made of a sandwich of ss/teflon/ss. By using this configuration the vents offer an extremely high cycle life for pressure fluctuations. The vent line includes rectangular and circular vents. Optional vents are made to meet rigid food grade applications.

More Information

Round or RectangularExplosion Vents

Note: European Standard Vent Sizes Provide A Cost Effective Alternative To US Custom Sizes

Q-PEx Vent Systems withQ-Rohr Flameless Vents

The Q-PEx flameless vent system using the Q-Rohr flameless ventprovides an effective alternative to suppression systems. The Q-PEx system combines the Q-Rohr vent with a variety of isolation options to meet NFPA required local protection codes. The low maintenance systems provide a cost advantage which minimizes the operational costs of protection.

For more information

IsolationGate Valve

IsolationValve

Internal Flameless Vent

Explosion Doors

The Thorwesten Self-Reclosing Explosion Doors provide a means of venting an explosion and immediately closing the vent to provide a seal area lowering the potential of fire damage

For more information

after the event. The vents require no replacement parts during normal operation keeping maintenance costs and down time before and after an event at a minimum.

Self Re-ClosingExplosion Isolation Door

ReflExVent Panel System

ATEX ReflEx Vent Panel Systemprovides a cost effective means to meet a variety of customer design configurations. Their unique pressure control design allows pressure release modification as operating conditions change. Depending on the forces during the explosion resetting of the system can be done on a short time basis with very little cost.

More Data

t

Explosion Vent“Field Adjustable”

Panels

Dry Chemical Suppression

Explosion Dry Chemical Suppression Systems suppress an incipient flame front stopping the development of a deflagration. Analog sensors send signals to electronic control equipment.

The unit sends a signal to the high rate suppressors suppressing the flame front and the propagation of the explosion.

Pressurized Hot Water Suppression

Explosion Hot Water Suppression Systems suppress an incipient flame front stopping the development of a deflagration. Analog sensors send signals to electronic control equipment.

The unit sends a signal to the high rate suppressors suppressing the flame front and the propagation of the explosion.

Control Panel

Analog Sensor

Chemical Suppressor

EXPLOSIONSUPPRESSION SYSTEMS

For More DetailsFor More DetailsSeeSee

ATEX Suppression 2002ATEX Suppression 2002Slide PresentationsSlide Presentations

ForForDry ChemicalDry Chemical

AndAndHot Water SystemsHot Water Systems

INBUREX

DEUTSCHLAND

INTERNATIONAL

U S A

PARTNERSWORLDWIDE