PRODUCT GUIDE - emerson.com · bus bar for superior corrosion resistance ... PlexPower™ powerboards simplify maintenance, with ample working room, a bus bar design, hard drawn branch

PLEXPOWER™ LIGHTING AND POWER PANELBOARDS — PRODUCT GUIDE

EASY TO INSTALL,

OPERATE AND MAINTAIN.

PlexPower™ Panelboards use circuit breaker modules that provide explosionproof protection for standard off-the-shelf breakers – eliminating the need for a heavy cast enclosure.Component level protection means the panelboard enclosure is lighter, more compact and easier to install. Breakers can be easily replaced, upgraded or added in the fi eld with no bolted cover to remove, no need for sealing or rewiring and no danger of compromising fl amepath integrity. A true MCCB mains breaker eliminates the need for a disconnect and fuse replacements.

There’s never been a simpler, more versatile way to protect lighting, power and heat trace circuits in wet, weather exposed, corrosive or hazardous locations. PlexPower™ Panelboards– the new innovation in panelboard simplicity, only from Appleton.

Page 2

SIMPLIFY PANELBOARD INSTALLATION AND BREAKER MAINTENANCEPlexPower™ panelboards eliminate the need for a heavy cast enclosure and bolted cover. Instead, explosionproof protection is provided at the component level – enabling a lighter weight panelboard that’s easier to install, operate and maintain.

Page 3

STANDARD FEATURES

• Factory Sealed Panelboards features 1-, 2- , 3- pole branch breakers only.

• Fused Factory Sealed Panelboards features 3- pole branch switches with fuses.

• Ground-breaking design uses individual breaker housings to minimize the downtime and cost of servicing circuit breakers in hazardous locations

• Lighter weight enclosure is easier to install and can be quickly opened in the fi eld for easier servicing

• No external conduit or cable seals required, making installations faster, easier, and less costly

• Horizontal and vertical coupling options for limitless installation fl exibility

• 3 circuit to 54 circuit panelboard confi gurations are standard, with or without mains breaker; up to 60 Amps per branch breaker (contact your local representative for larger amperages)

• Uses standard, off-the-shelf main and branch circuit breakers and fuses that are easy to source, stock and service

• Supplied with standard hard drawn, tin plated copper bus bar for superior corrosion resistance

• Gland plate at the bottom of enclosure and optional gland plates on all sides can be easily fi eld punched for cable or conduit entries

• Standard confi guration includes internal actuators and a solid door; factory installed options include window door or external actuators

• Breaker modules supplied with captive bolts• Ground and neutral bars provided as standard• External ground lug provided as standard

CERTIFICATIONS• Lighting Panelboards with Main Lugs: 120/240 Volt,

240 Volt, 120/208 Volt — Class I, Zone 1, AEx de IIB+H2 T5 — Ex de IIB+H2 T5 — Class I, Division 2, Groups B, C, D — Class II, Division 1, Groups F, G (without drain/breather) — Class III (without drain/breather) — IP66, Type 4X (with drain/breather)

• Lighting Panelboards with Main Breaker: 120/240 Volt, 240 Volt, 120/208 Volt

— Class I, Zone 1, AEx de IIB T5 — Ex de IIB T5 — Class I, Division 2, Groups C, D — Class II, Division 1, Groups F, G (without drain/breather) — Class III (without drain/breather) — IP66, Type 4X (with drain/breather)

• Power Panelboards: 277/480 Volt, 480 Volt, 347/600 Volt, 600 Volt

— Class I, Zone 1, AEx de IIB T5 — Ex de IIB T5 — Class I, Division 2, Groups C, D — Class II, Division 1, Groups F, G (without drain/breather) — Class III (without drain/breather)

— IP66, Type 4X (with drain/breather)

• Fused Lighting and Power Panelboards: 120 - 600 Volt

— Class I, Zone 1, AEx de IIB T5

— Ex de IIB T5

— Class I, Division 2, Groups C, D

— Class II, Division 1, Groups F, G (without drain/breather)

— Class III (without drain/breather)

— IP66, Type 4X (with drain/breather)

BUILT FOR THE GLOBAL MARKETPLACEAppleton® PlexPower™ panelboards provide explosionproof protection of lighting, heat trace and power circuits in NEC/CEC Class I, Division 2; Class I, Zone 1; and Class II hazardous locations. Indoors or outdoors, in weather exposed and corrosive environments, PlexPower™ panelboards provide the ideal electrical distribution solution for every part of your facility.

Page 4

CHEMICAL AND PETROCHEMICAL MANUFACTURING

OFFSHORE DRILLING RIGS

WASTE AND WASTEWATER TREATMENT FACILITIES

REFINERIES

INDUSTRIES AND APPLICATIONS

PlexPower™ panelboards provide indoor and outdoor protection and control of electrical circuits in hazardous environments. These robust and rugged panelboards are ideal for placement in wet, corrosive environments or where fl ammable gases or vapors are likely to be present.

CONFIGURED TO YOUR EXACT REQUIREMENTSPlexPower™ panelboards are available in materials to suit your needs for corrosion resistance and durability. Factory installed options allow you to specify panelboards that deliver optimal performance for every facet of your operation. When you need to upgrade, PlexPower™ is designed for easy reconfi guration and expansion in the fi eld – with no need to seal conduit or cable entries and no need to rewire terminations.

Page 5

STANDARD MATERIALS

• Enclosure: 304 stainless steel• Hardware: stainless steel• Bus bar: hard drawn, tin plated copper

STANDARD OPTIONS

• Alternate enclosure material:— 316L stainless steel, add suffi x —316L

• Drain/breather, add suffi x —DV (with drain/breather)• Ground fault interrupter breakers for 120V sinlge pole:

— For 5 mA, add suffi x —GFI after breaker— For 30 mA, add suffi x —EPD after breaker

• External actuation, add suffi x —EXT• Grounded neutral, add suffi x —GN• Gland plate, specify suffi x:

— GPL = left side— GPR = right side— GPT = top side— NGP = no gland plate

• Thermostatically controlled heater, (without drain/breather)— For Class I, Division 2 and Class I, Zone 2 equivalency,

add suffi x — HTR. – For Lighting Panels with Main Lugs, Class I, Division 2,

Groups B, C, D and Class I, Zone 2 IIB+H2.– For Lighting Panels with Main Breaker or Power

Panels, Class I, Division 2, Groups C, D and Class I, Zone 2 IIB.

— For Class I Zone 1 certifi cation, add suffi x —HTRF.– No change to standard Certifi cations.

• LED indicator lights, add suffi x —IL• Inverted feed, add suffi x —INV• Phenolic nameplate (specify legend), add suffi x —NP• Door padlocking provision, add suffi x —P• Stainless steel legend plate (specify legend),

add suffi x —SP• Terminal blocks instead of direct wiring, add suffi x —TB• Higher ambient temperature rated breakers available

(de-rating applies):— For +50°C (+122°F) breaker rating, add suffi x —V— For +60°C (+140°F) breaker rating, add suffi x —VI— For +70°C (+158°F) breaker rating, add suffi x —VII

• Window with internal actuation only, add suffi x —W

STANDARD OFF-THE-SHELF BREAKERS

FACTORY SEALED PANELBOARDS• Available breaker modules:

— QC Frame — F-Frame

• Available mains circuit breaker:— Up to 150 Amps, 2- or 3-pole

• Available branch circuit breakers:— 1-pole: 120, 277, 347 Volts, 60 Amps maximum— 1-pole: 120 Volts, 30 Amps, GFI or EPD— 2- and 3-pole: 240 Volts, 40 Amps maximum— 2- and 3-pole: 480, 600 Volts, 150 Amps maximum

FUSED FACTORY SEALED PANELBOARDS• Available breaker modules:

— F-Frame

• Available mains circuit breakers:— Up to 150 Amps maximum

• Available fuses:Up to 30 Amps maximum

CIRCUIT PROTECTION AND CONTROL SIMPLIFIEDWith component level protection, standard ordinary location circuit breakers can be replaced or upgraded in minutes – with no danger of compromising fl amepaths. An optional mains breaker simplifi es disconnection of all branch circuits for maintenance, with no disconnect fuses to replace.

Page 6

BREAKER FLEXIBILITY

1. Rugged Termination:Each housing connects to the panelboard by means of line terminations designed for unyielding performance through years of heavy vibrations and shocks.

2. Flameproof enclosure housing:Labyrinth joint construction and fl ame arrestors maintain hazardous location rating while allowing easy disassembly for servicing breakers.

3. Venting plate:Unique design of housing allows safe heat dissipation, enabling breakers to maintain their rated amperage while eliminating nuisance tripping.

4. Field Replaceable Components:Standard, off-the-shelf circuit breakers and fuses are easy to obtain and reduce inventory costs and downtime.

5. Field Replaceable Fuses:Standard, off-the-shelf fused circuit breakers are easy to obtain and reduce inventory costs and downtime.

MAINS BREAKER MODULE

1

2

3

4

1

2

3

4

BRANCH BREAKER MODULE

1

2

3

5

FUSED MODULE

EASY TO INSTALL Engineered to solve operational problems, PlexPower™ panelboards are built of lighter materials to install simply and securely into your existing layout. The modular design can be easily reconfi gured in the fi eld to accommodate the circuits you need – today and tomorrow.

Page 7

LATCHESQuarter turn latches for easy access. No danger of improperly torquing cover bolts or damaging a precision machined fl amepath.

COVERSelf-aligning, reinforced cover is easy to open and resists twisting or deformation.

HINGESRobust hinges allow for 180° door opening.

MOUNTING FEETRobust hardware with welded mounting feet for greater strength.

FUSED FACTORY SEALED PANELBOARDSIZE E 12 CIRCUIT

EASY TO OPERATE PlexPower™ panelboards are designed with the user in mind, providing instant visual confi rmation of breaker position and easy access to actuators, with no heavy cover to unbolt, remove and replace.

Page 8

OPTIONAL EXTERNAL ACTUATION WITH LOCKING GUARDStandard confi guration includes internal actuators and a solid door. Factory installed options include window door or external actuators.

INDICATORSHigh intensity LED lights allow easy visual identifi cation of breaker position.

ENCLOSUREAvailable in 304 stainless steel for exceptional corrosion resistance; other materials available.

GLAND PLATEGland plate on the bottom and optional removable gland plates on every side allow for the addition of new cable entries in the fi eld.

DRAIN/BREATHEROptional fi tting is installed at the bottom of the enclosures to allow water vapor to escape and minimize condensation within the enclosure interior.

GROUND LUGExternal/internal ground lug provided as standard to dissipate and limit the rise in voltage of the grounded unit.

FACTORY SEALED PANELBOARDSIZE D 12 CIRCUIT

EASY TO MAINTAINPlexPower™ powerboards simplify maintenance, with ample working room, a bus bar design, hard drawn branch breaker, connections and modular breaker housings that are easy to open for service.

Page 9

BUS BARStand hard drawn copper bus bar provides robust, reliable and effi cient electrical connections in a compact space.

INCOMING MAINS BREAKER (MCCB) OR DISCONNECTOptional 3-pole mains breaker up to 150 Amps for simple disconnection of all branch circuits for maintenance, with no disconnect fuses to replace.

FACTORY INSTALLED LINE CONNECTIONSSimplifi ed wiring with plenty of working room; connections are sized to accept 1-pole branch breakers up to 347 Volts/60 Amps, and 2- or 3-pole breakers up to 600 Volts/150 Amps.

NEUTRAL LUGStandard neutral lug mounted on a standard neutral bus bar for incoming neutral connection.

GROUND LUGStandard ground lug for incoming connection.

GROUND BUSStandard ground lug for incoming connection.

ACTUATORSOptional self-aligning stainless steel actuators.

CONNECTION LINKSHard copper branch connections.

STEPS TO CREATING A CATALOG NUMBER

Page 10

FACTORY SEALED LIGHTING PANELBOARDS RQ S D1 3 1 M 12 100 1 15 1 GFI __

Step 1 Step 2 Step 3 Step 4 Step 5 Step 6Step 1: Choose basic catalog number from tables on subsequent pages or from numbering guide on previous page.Step 2: If a main breaker is desired indicate amperage rating.

Example: RQSD131M12 – 100 is a 12 circuit 3 phase panelboard c/w 100 amp main breaker.Step 3: First digits are the quantity of breakers, second the ampere rating, and third the number of poles.

Example: 1151 is 1 breaker, 15 amps, 1 pole breakerStep 4: This is where breaker type is indicated

Blank - standard breakerGFI - 5 mA GFI breaker- single pole only (limited to 2 breakers per 3 circuit module) EPD - 30 mA EPD breaker- single pole only (limited to 2 breakers per 3 circuit module)

Step 5: Repeat steps 3 and 4 for as many breaker types as requiredStep 6: Options: Add option in alphanumeric order as listed PlexPower™ introduction page under Options.

FUSED FACTORY SEALED PANELBOARDS RFF S E1 3 1 M 12 100 1 15 T __

Step 1 Step 2 Step 3 Step 4 Step 5Step 1: Choose basic catalog number from tables on subsequent pages or from numbering guide on previous page.Step 2: If a main breaker is desired indicate amperage rating.

Example: RFFSE131M12 – 100 is a 12 circuit 3 phase panelboard c/w 100 amp main breaker.Step 3: First digits are the quantity of breakers, second the fuse ampere rating, and third the type of fuse.

Example: 115T is 1 fuse, 15 amps, T for time delayStep 4: Repeat step 3 for as many breaker types as requiredStep 5: Options: Add option in alphanumeric order as listed PlexPower™ introduction page under Options.

FACTORY SEALED LIGHTINGStandard Panelboard Catalog Logic

RQ S D1 3 1 M 12 100 1 15 3 GFI __

Step 1 Step 2 Step 3 Step 4 Step 5 Step 6

Series and Breaker Type:

RQ - 120 to 240 V panel with QC Breakers

System Voltage:1 - 120/2402 - 2403 - 120/2088 - Special

Contact(Consult your local representative for price and availability.)

Number of Circuits:

03061218243036424854

Ampere Rating :15 - 15AT20 - 20AT25 - 25AT30 - 30AT40 - 40AT45 - 45AT50 - 50AT60 - 60AT

Additional Branch

Breakers:Repeat Step 3

Panel Material:S - Stainless Steel

(304 standard. For 316L use S here and add 316L suffix at end of catalog number)

Bus Rating:1 - 100 Amp lug2 - 225 Amp lug

Main Breaker Ampere Rating:

020 - 20AT025 - 25AT030 - 30AT040 - 40AT050 - 50AT060 - 60AT070 - 70AT080 - 80AT090 - 90AT100 - 100AT110 - 110AT125 - 125AT150 - 150AT

Breaker Type:Normal Duty

(Leave Blank)EPD GFI

Suffix for Other Options/Features:Must be listed in

alphanumeric sequence

(See Options)

Number of Poles:

1 - 1-Pole2 - 2-Poles3 - 3-Poles

Main Type: M - Main Breaker L - Main Lug Only

Quantity of Branch Breakers:1 thru 54

Panel Size: Select A1, B1, C1, D1, J1, F1, L1 or H1 stainless steel enclosure based on number of circuitsBus

Amps VoltsA1 B1 C1 D1 J1 F1 L1 H1

370x370x250 560x370x250 560x560x250 750x560x250 875x560x250 1130x560x250 1260x560x250 1500x560x250Main Lugs Only — External Actuation Only

100240 Max

3 6 12 18 24 30 , 36 42 48 , 54225 — — 12 18 24 30 , 36 42 48 , 54

With Main Breaker — External Actuation Only100

240 Max— 3 6 12 18 30 36 42 , 48

225 — — — 12 18 30 36 42 , 48Main Lugs Only — Internal Actuation Only

100240 Max

3 6 12 18 24 30 , 36 42 48 , 54225 — — 12 18 24 30 , 36 42 48 , 54

With Main Breaker — Internal Actuation Only100

240 Max— — 6 12 18 30 36 42 , 48

225 — — — 12 18 30 36 42 , 48

Please note the followings:• Number of circuits shown are non GFI and non EPD breakers.• GFI and EPD breakers number of circuits are determined as total number of circuits divided by 3 = No of 3 pole modules. Each module will accommodate only 2 GFI

or EPD maximum. Example: For 12 Circuits, no of modules = 12/3=4.

NEC/CEC Certified lighting panels: 120/240 Volt, 240 Volt, 120/208 Volt. Only 2 per 3 circuits. Only Single pole GFI/EPD available. 40A is the maximum amperage for 2 or 3 pole branch breaker. Only one 60A branch breaker is allowed per panel.

Page 11

FACTORY SEALED POWERStandard Panelboard Catalog Logic

RF S D1 3 1 M 12 100 1 15 3 __ __

Step 1 Step 2 Step 3 Step 4 Step 5 Step 6

Series and Breaker Type:

RF - 480 to 600 V panel with F-Frame Breakers

System Voltage:4 - 277/4805 - 4806 - 347/6007 - 6008 - Special

Contact(Consult your local representative for price and availability.)

Number of Circuits:

0306121824303642

Ampere Rating:15 - 15AT20 - 20AT25 - 25AT30 - 30AT35 - 35AT40 - 40AT50 - 50AT60 - 60AT70 - 70AT

(not for 1-Pole)80 - 80AT

(not for 1-Pole)90 - 90AT

(not for 1-Pole)100 - 100AT 110 - 110AT

(2-, 3-Pole, 480, 600 Only)

125 - 125AT (2-, 3-Pole, 480, 600 Only)

150 - 150AT (2-, 3-Pole, 480, 600 Only)

Additional Branch

Breakers:Repeat Step 3



Bus Rating:1 - 100 Amp lug2 - 225 Amp lug



Breaker Type:Normal Duty

(Leave Blank)



(See Options)

Number of Poles:

1 - 1-Pole2 - 2-Poles3 - 3-Poles

Main Type: M - Main Breaker L - Main Lug Only

Quantity of Branch Breakers:1 thru 42

Panel Size: Select A1, C1, I1, E1, K1 or G1 stainless steel enclosure based on number of circuitsBus

Amps VoltsA1

370x370x250C1

560x560x250I1

875x750x250E1

1130x750x250K1

1260x750x250G1

1500x750x250Main Lugs Only — External Actuation Only

100277/480; 480; 347/600; 600

3 6 12 , 18 24 30 36, 42225 — 6 12 , 18 24 30 36

With Main Breaker — External Actuation Only100

277/480; 480; 347/600; 600— — 12 18 24 36 , 30

225 — — 12 18 24 30Main Lugs Only — Internal Actuation Only

100277/480; 480; 347/600; 600

3 6 12 , 18 24 30 36 , 42225 — 6 12 , 18 24 30 36

With Main Breaker — Internal Actuation Only100

277/480; 480; 347/600; 600— 12 12 18 24 36 , 30

225 — 12 12 18 24 30

Please note the followings:• Alternative arrangement are available as option, consult local sales representative.

NEC/CEC Certified power panels: 277/480 Volt, 480 Volt, 347/600 Volt, 600 Volt.

Page 12

FUSED FACTORY SEALEDStandard Panelboard Catalog Logic

Panel Size: Select enclosure based on number of circuits

Bus Amps

Main Type

I1 E1 G1875x750x250 1130x750x250 1500x750x250

180 Main Lugs 03, 06, 09 12, 15 18

150 Main Breaker 03, 06 09, 12 15

RFF S E1 3 1 M 12 100 1 15 T __

Step 1 Step 2 Step 3 Step 4 Step 5

Fused Series:RFF - up to 600

V Fused Panel with F-Frame Switch and Class J fuse holder

3 PhaseSystem Voltage:

2 - 2403 - 120/2084 - 277/4805 - 4806 - 347/6007 - 600

Number of Circuits:

030609121518

Fuse Ampere Rating :

01 - 01AT02 - 02AT03 - 03AT04 - 04AT05 - 05AT06 - 06AT07 - 07AT08 - 08AT09 - 09AT10 - 10AT15 - 15AT20 - 20AT25 - 25AT30 - 30AT



(See Options)



Bus Rating:1 - 150 Amp2 - 180 Amp



Fuse Type:T - Time delayF - Fast acting

Main Type: M - Main Breaker

(150 A Max)L - Main Lug Only

(180 A Max)

Quantity of Branch Fuses:

up to 18

Additional Branch Fuses: Repeat Step 3

Fast acting fuses are available in the following amperages: 1, 3, 6, 10, 15, 20, 25 and 30.

Page 13

PLEXPOWER™ FACTORY SEALED PANELBOARD QC -FRAME WITH MAIN LUGS Dimensions: Stainless Steel Enclosures

Page 14

SIZE B 6 CIRCUIT – INTERNAL ACTUATION

TOP VIEW FRONT VIEW SIDE VIEW INTERNAL VIEW

560 mm (22.03")

370

mm

(14.

57")

285

mm

(11.

22")

595 mm (23.43")

250 mm (9.85") 144 mm (5.68")BOTTOM VIEW

51 mm (2.01")

229 mm (9.02")

250 mm (9.85 ")

SIZE B 6 CIRCUIT – EXTERNAL ACTUATION

BOTTOM VIEW FRONT VIEW SIDE VIEW

229 mm (9.02 ")

51 mm (2.01 ")9.85 " (250 mm)

595 mm (23.43 ")

1

3

5

2

4

6

560 mm (22.03 ")

370

mm

(14.

57 ")

285

mm

(11.

22 ")

250 mm (9.85 ")

PLEXPOWER™ FACTORY SEALED PANELBOARD QC -FRAME WITH MAIN LUGS Dimensions: Stainless Steel Enclosures

Page 15

SIZE H 54 CIRCUIT – INTERNAL ACTUATION


150

0 m

m (5

9.06

")

668

mm

(26.

28 ")

66

8 m

m (2

6.28

")

595 mm (23.43 ")

560 mm (22.04 ")250 mm (9.85 ")

258 mm (10.17 ")

BOTTOM VIEW

51 mm (2.02 ")

229 mm (9.02 ")

250 mm (9.85 ")

SIZE H 54 CIRCUIT – EXTERNAL ACTUATION


51 mm (2.02 ")

229 mm (9.02 ")

250 mm (9.85 ")

ON

OFFTRIP

ON

OFFTRIP

1

3

5

7

9

11

13

15

17

19

21

23

25

27

29

2

4

6

8

10

12

14

16

18

20

22

24

26

28

30

31

33

35

32

34

36

37

39

41

38

40

42

49

51

53

50

52

54

43

45

47

44

46

48

1500

mm

(59.

06 ")

668

mm

(26.

28 ")

668

mm

(26.

28 ")

595 mm (23.43 ")

560 mm (22.04 ") 250 mm (9.85 ")

PLEXPOWER™ FACTORY SEALED PANELBOARD QC -FRAME WITH MAIN BREAKER Dimensions: Stainless Steel Enclosures

Page 16

SIZE C 6 CIRCUIT – INTERNAL ACTUATION


560 mm (22.04 ")

560

mm

(22.

04 ")

395

mm

(15.

55 ")

595 mm (23.43 ")250 mm(9.85 ") 126 mm (4.98 ")

BOTTOM VIEW

51 mm (2.01 ")

229 mm (9.02 ")

250 mm (9.85 ")

SIZE C 6 CIRCUIT– EXTERNAL ACTUATION


51 mm (2.01 ")

229 mm (9.02 ")

250 mm (9.85 ")

ON

OFFTRIP

ON

OFFTRIP

1

3

5

2

4

6

560

mm

(22.

04 ")

395

mm

(15.

55 ")

595 mm (23.43 ")

560 mm (22.04 ") 250 mm (9.85 ")

SIZE H 48 CIRCUIT– INTERNAL ACTUATION


1500

mm

(59.

06 ")

668

mm

(26.

28 ")

668

mm

(26.

28 ")

595 mm (23.43 ")

560 mm (22.04 ") 250 mm (9.85 ")177 mm (6.98 ")

BOTTOM VIEW

51 mm (2.02 ")

229 mm (9.02 ")

50 mm (9.85 ")

SIZE H 48 CIRCUIT – EXTERNAL ACTUATION


51 mm (2.02 ")

229 mm (9.02 ")

250 mm (9.85 ")

ON

OFFTRIP

ON

OFFTRIP

1

3

5

7

9

11

13

15

17

19

21

23

25

27

29

2

4

6

8

10

12

14

16

18

20

22

24

26

28

30

31

33

35

32

34

36

37

39

41

38

40

42

43

45

47

44

46

48

1500

mm

(59.

06 ")

668

mm

(26.

28 ")

668

mm

(26.

28 ")

595 mm (23.43 ")

560 mm (22.04 ")250 mm (9.85 ")

PLEXPOWER™ FACTORY SEALED PANELBOARD QC -FRAME WITH MAIN BREAKERDimensions: Stainless Steel Enclosures

Page 17

PLEXPOWER™ FACTORY SEALED PANELBOARD F-FRAME WITH MAIN LUGSDimensions: Stainless Steel Enclosures

SIZE C 6 CIRCUIT – INTERNAL ACTUATION


BOTTOM VIEW

SIZE C 6 CIRCUIT – EXTERNAL ACTUATION


Page 18

PLEXPOWER™ FACTORY SEALED PANELBOARD F-FRAME WITH MAIN LUGSDimensions: Stainless Steel Enclosures

Page 19

SIZE G 36 CIRCUIT– INTERNAL ACTUATION


BOTTOM VIEW

SIZE G 36 CIRCUIT – EXTERNAL ACTUATION


PLEXPOWER™ FACTORY SEALED PANELBOARD F-FRAME WITH MAIN BREAKERDimensions: Stainless Steel Enclosures

Page 20

SIZE I 12 CIRCUIT – INTERNAL ACTUATION


BOTTOM VIEW

SIZE I 12 CIRCUIT – EXTERNAL ACTUATION


PLEXPOWER™ FACTORY SEALED PANELBOARD F-FRAME WITH MAIN BREAKERDimensions: Stainless Steel Enclosures

SIZE G 30 CIRCUIT – INTERNAL ACTUATION


BOTTOM VIEW

SIZE G 30 CIRCUIT – EXTERNAL ACTUATION


Page 21

SIZE I 09 CIRCUIT — WITH MAIN LUGS


785 mm (30.91”) Mtg.

750 mm (29.53”)

355

mm

(1

3.98

”) M

tg.

355

mm

(1

3.98

”) M

tg.

875

mm

(34.

45”)

250 mm (9.85”)

BOTTOM VIEW

SIZE I 06 CIRCUIT — WITH MAIN BREAKER


785 mm (30.91”) Mtg.750 mm (29.53”)

355

mm

(1

3.98

”) M

tg.

355

mm

(1

3.98

”) M

tg.

875

mm

(34.

45”)

250 mm (9.85”)

BOTTOM VIEW

PLEXPOWER™ FUSED FACTORY SEALED PANELBOARD WITH BUS BAR F-FRAME Dimensions: Stainless Steel Enclosures

Page 22

PLEXPOWER™ FUSED FACTORY SEALED PANELBOARD WITH BUS BAR F-FRAME Dimensions: Stainless Steel Enclosures

SIZE G 18 CIRCUIT — WITH MAIN LUGS

TOP VIEW FRONT VIEW SIDE VIEW INTERNAL VIEW785 mm (30.91”) Mtg.

750 mm (29.53”)

688

mm

(26.

28”)

Mtg

.68

8 m

m (2

6.28

”) M

tg.

1500

mm

(59.

06”)

250 mm (9.85”)

BOTTOM VIEW

SIZE G 15 CIRCUIT — WITH MAIN BREAKER

TOP VIEW FRONT VIEW SIDE VIEW INTERNAL VIEW785 mm (30.91”) Mtg.

750 mm (29.53”)

688

mm

(26.

28”)

Mtg

.68

8 m

m (2

6.28

”) M

tg.

1500

mm

(59.

06”)

250 mm (9.85”)

BOTTOM VIEW

Page 23

Appleton Grp LLC d/b/a Appleton Group. The Appleton and Emerson logos are registered in the U.S. Patent and Trademark Offi ce. All other product or service names are the property of their registered owners. © 2016, Appleton Grp LLC. All rights reserved. The Emerson logo is a trademark and a service mark of Emerson Electric Co. © 2016, Emerson Electric Co.

Appleton Group9377 W. Higgins RoadRosemont, IL 600181.800.377.4384appletonelec.com

Emerson brings integrated manufacturing solutions to diverse industries worldwide. Our comprehensive product line, extensive experience, world-class engineering and global presence enable us to implement solutions that give our customers the competitive edge. Appleton is our premium line of lighting and electrical products for hazardous and industrial locations.

For over 150 years, our electrical product brands have been providing a rich tradition of long-term, practical, high quality solutions with applications ranging from the construction and safe operation of petrochemical and process plants to providing quality power that precisely controls automotive robotic production.

Engineers, distributors, contractors, electricians and site maintenance professionals around the world trust Emerson brands to make electrical installations safer, more productive and more reliable.

The Appleton Group business unit of Emerson is organized into three focused groups that provide distributors and end users expert knowledge and excellent service.

Electrical Construction Materials This group is made up of the Appleton and O-Z/Gedney brands. They manufacture a broad range of electrical products including conduit and cable fi ttings, plugs and receptacles, enclosures and controls, conduit bodies and industrial and hazardous lighting. Whether the application is hazardous location, industrial or commercial, the electrical construction materials group has the products to meet your needs.

Power Quality SolutionsThe SolaHD brand offers the broadest power quality line, including uninterruptible power supplies, power conditioners, voltage regulators, shielded transformers, surge protection devices and power supplies.

Heating Cable Systems This group is made up of the EasyHeat and Nelson brands. They offer a broad range of electrical heating cable products for residential, commercial and industrial applications.

Asia/Pacifi c+ 65.6556.1100

Australia+ 61.3.9721.0348

Canada+ 1.888.765.2226

China+ 86.21.3338.7000

Europe+ 33.3.22.54.13.90

Mexico/Latin America+ 52.55.5809.5049

Middle East/Africa/India+ 971.4.881.8100

United States+ 1.800.621.1506

Documents

PRODUCT GUIDE - emerson.com · bus bar for superior corrosion resistance ... PlexPower™ powerboards simplify maintenance, with ample working room, a bus bar design, hard drawn branch