Upload
truongdat
View
374
Download
12
Embed Size (px)
Citation preview
FRIALIT®/XiVE®
ANKYLOS®
FRIOS®
PEPGEN P-15®
ANKYLOS®
Product Catalog
Status: November 2007
1107
14/G
VD
ANKYLOS_Prodkat_6-252004_E1.qxd:ANKYLOS_Prodkat_6-252004_E.qxd 11.01.2008 16:01 Uhr Seite 29
2
ANKYLOS_Prodkat_6-252004_E1.qxd:ANKYLOS_Prodkat_6-252004_E.qxd 11.01.2008 16:00 Uhr Seite 2
3
Contents
Implants Page 4
Instruments: Implant placement Page 6
Instruments: Surgery Page 10
FRIOS® surgical units Page 12
Instruments: Implant recovery Page 13
Abutments: Balance Anterior Page 14
Abutments: Balance Posterior Page 15
Balance Base abutments Page 16
Abutments: SynCone® Page 17
Abutments: Snap attachment, abutments without sulcus height Page 18
Abutments: Standard system Page 19
Abutments: Standard system, analogs and aids Page 20
Screws Page 22
Instruments: Prosthetics Page 22
Training, demonstration aids Page 26
ANKYLOS_Prodkat_6-252004_E1.qxd:ANKYLOS_Prodkat_6-252004_E.qxd 11.01.2008 16:00 Uhr Seite 3
4
ANKYLOS® plus Implants
ANKYLOS® dental implants consist of uncoated pure titanium (grade 2, according toISO 5832/II). The threaded area features the FRIADENT® plus surface and the cervicalmargin is microstructured*. The implants come in a sterile double glass packing forcontact- free handling. The cover screw has already been mounted in the implant andis only removed prior to placing in the abutment.
Nomenclature
ANKYLOS® plus dental implants are available in three diameters and in differentlengths. Due to the practice-oriented graduation of size they are suitable for allindications of dental implantology with a comprehensive number of single implants. They can be used as implants for healed ridges and also for extraction sites.
The designation of the individual implants always includes a capital letterrepresenting the diameter and a number. The number indicates the length of theimplant in millimeters. The cover of the omplant packing are colour-coded fordistinguishing the implant’s diameter.
Storage/Shelf life/Sterility
Sterile ANKYLOS® implants must be stored at normal room temperature and in a dryplace in their original packaging. The shelf life is printed on the label.
These implants are for single-use only. Any implant which has been placedpreviously or is no longer sterile must not be implanted. The implant must not be usedafter the sterility date. Never interrupt the sterility chain.
Ø
L
* Patent pending
8 mm 9.5 mm 11 mm 14 mm 17 mm3.5 mm A8 A9.5 A11 A14 A174.5 mm B8 B9.5 B11 B14 B175.5 mm C8 C9.5 C11 C14 C177.0 mm D8 D9.5 D11 D14
LØ
ANKYLOS® colour-coding
ANKYLOS_Prodkat_6-252004_E1.qxd:ANKYLOS_Prodkat_6-252004_E.qxd 11.01.2008 16:00 Uhr Seite 4
5
ANKYLOS® plus Implants
Scale: 1.5:1
Designation A8* A9.5 A11 A14 A17Ø 3.5 mm 3.5 mm 3.5 mm 3.5 mm 3.5 mmLength 8 mm 9.5 mm 11 mm 14 mm 17 mmProduct no. 3101 0205 3101 0208 3101 0210 3101 0220 3101 0222
* Supporting implant
Designation B8 B9.5 B11 B14 B17Ø 4.5 mm 4.5 mm 4.5 mm 4.5 mm 4.5 mmLength 8 mm 9.5 mm 11 mm 14 mm 17 mmProduct no. 3101 0225 3101 0228 3101 0230 3101 0240 3101 0250
Designation C8 C9.5 C11 C14 C17Ø 5.5 mm 5.5 mm 5.5 mm 5.5 mm 5.5 mmLength 8 mm 9.5 mm 11 mm 14 mm 17 mmProduct no. 3101 0253 3101 0255 3101 0258 3101 0260 3101 0270
Designation D8 D9.5 D11 D14Ø 7 mm 7 mm 7 mm 7 mmLength 8 mm 9.5 mm 11 mm 14 mmProduct no. 3101 0272 3101 0274 3101 0276 3101 0278
ANKYLOS_Prodkat_6-252004_E1.qxd:ANKYLOS_Prodkat_6-252004_E.qxd 11.01.2008 16:00 Uhr Seite 5
6
ANKYLOS® Instruments: Implant placement
X-ray templatesThe implants and the sulcus formers have been illustrated in three enlargement ratios on the transparent X-ray templates.1:1 Model1:1,1 Tooth film (P.A.)1:1,25 Orthopantomogram (OPG)
For exact determination of the enlargement ratio of the individual X-ray units we recommend to take an X-ray photography including spheres with defined size.
Product no. Description
3103 3370 X-ray template for implants49 – 1211 Measuring spheres Ø 5 mm, 8 pcs.
The Surgical Kits customized to your requirementsThe innovative, elegant design of the new surgical kits makes it clear that DENTSPLY Friadent has taken a completely differentdirection in their trays. Our target is to make the surgical procedure as simple as possible. In addition to the clear userguide the modular concept of the new trays also offers maximumflexibility and economy. You can manage almost all cases with the basic equipment. If you wish to expand your implantdental range, you can add new instrument modules to your existing kits.Simple, flexible and economical with modular design and fewer required instruments
• Functional: optimum user guidance with color-coded silicone inserts that prevent instruments from falling out, and an integrated organizer for used instruments.
• Modular: you can add different modules depending on your specific requirements. Three prepacked modules are available.
• Esthetic: exclusive design of high-quality plastic; no edges make it easy to clean.
• NEW! Including uncovery instruments, which means that a separate cassette is not required. A hex screwdriver and instrument for removing the cover screw used for trans-gingival healing or immediate loading can be added.
Product no. Description
3103 6500 Surgical Kit manual ABC3103 6510 Surgical Kit manual AB3103 6522 Surgical Kit motor AB reamer3103 6540 Surgical Kit ABC empty3103 6542 Surgical Kit motor AB reamer empty
ANKYLOS_Prodkat_6-252004_E1.qxd:ANKYLOS_Prodkat_6-252004_E.qxd 11.01.2008 16:00 Uhr Seite 6
Instruments: Implant placement
3103 3030 RatchetReversible ratchet to drive the ratchet inserts
3103 3031 Ratchet spring (spare part - not shown)
3103 3050 Open-end wrench
3103 3040 HandleFor plugging on the ratchet inserts, as an alternative to the ratchet
3103 3060 Cover cap for ratchet-insert
Ratchet inserts for instrumentsTo accept the conical reamers and the taps
3103 3070 short3103 3080 medium3103 3090 long
3103 3081 Ratchet insert for M instruments, medium3103 3082 Ratchet insert for M instruments, long
Implant-Insertion Instrument3103 3091 short, for manual placement3103 3092 medium, for manual placement3103 3093 long, for manual placement
3103 3102 short, for handpiece placement 3103 3122 long, for handpiece placement
Ratchet inserts for implantsThe ratchet inserts for implants are special instruments for the insertion of A-implants inextreme narrow gaps between teeth. For this purpose the A-implants will be remounted from the Direct-Insertion-System’sadapter on the Assembly Device for implants
3103 3110 medium3103 3120 long
3103 3290 Assembly Device for implants (Titanium)3103 3391 Titanium tweezers 12 cm (depicted smaller
than actual size)
Product no. Description Fig.
Scale: 1:1
11
2
3
4
2
3 4
567
5 6 7
89
8 9
10
10
11 1217 18
1211
131314
1516
1718
14
15 16
7
ANKYLOS_Prodkat_6-252004_E1.qxd:ANKYLOS_Prodkat_6-252004_E.qxd 11.01.2008 16:00 Uhr Seite 7
8
ANKYLOS® Instruments: Implant placement
Depth drillInstruments for the preparation of the implant bed also feature ring markings for depth calibration andinternal cooling. For inserting implants the depth drills must be used in ascending order. Drills with differentlengths are avaiable. The types XS can be used for a maximum length of 8 mm, the types S for maximum 14 mm implant length. (Figure: For implant A, B, C: Tri-Spade drill, for implant D: parallel drill)
Type XS S M L XS S M LFor implant A A A A B B B BProd. no. Tri-Spade drill 3103 7324 3103 7325 3103 7330 3103 7340 3103 7344 3103 7345 3103 7350 3103 7360Prod. no. Disposable drill (sterile) 3103 7125 3103 7130 3103 7145 3103 7150
Scale: 1:1
Scale: 1:1
Scale: 1:1
Type XS S M L XS S MFor implant C C C C D D DProd. no. Tri-Spade drill 3103 7364 3103 7365 3103 7370 3103 7380Prod. no. Disposable drill (sterile) 3103 7165 3103 7170Prod. no. Parallel drill 3103 3181 3103 3182 3103 3183
17 mm14 mm11 mm8 mm9.5 mm
17 mm14 mm11 mm8 mm9.5 mm
* With internal cooling** The drill extension must always be used with the long internal irrigation tube (REF 90 – 5043).
Center punch* Pilot drill* Twist drill* Parallel gauge DrillExtension**
91 – 0003 3103 7408
(titanium)for pilot drills
(titanium)for twist drills
ExtensionInstrument
HXSS
Type Ø 3 mm l = 8 mm l = 11 mm Ø 2 mm ring markingProduct no 3103 3010 3103 3015 3103 3020 3103 3022 3103 3025 3103 3026
ANKYLOS_Prodkat_6-252004_E1.qxd:ANKYLOS_Prodkat_6-252004_E.qxd 11.01.2008 16:00 Uhr Seite 8
9
Conical reamersInstruments for enlarging the shank hole corresponding to the conical core of the implants. For each implant a separate reamer is available which also serves as a measuring implant. Due to the non-cutting tip the reamers cannot go beyond the depth of the prepared implant bed.(Fig.: Hand preparation instruments)
For implant A8 A9.5 A11 A14 A17Prod. no. for ratchet 3103 3185 3103 3188 3103 3190 3103 3200 3103 3202Prod. no. for handpiece 3103 7185 3103 7188 3103 7190 3103 7200 3103 7202
Scale: 1:1
For implant A B C DProd. no. for ratchet 3103 3260 3103 3270 3103 3280 3103 3285Prod. no. for handpiece (HXSS) 3103 7440 3103 7450
Scale: 1:1
Taps
For implant B8 B9.5 B11 B14 B17Prod. no. for ratchet 3103 3205 3103 3208 3103 3210 3103 3220 3103 3230Prod. no. for handpiece 3103 7205 3103 7208 3103 7210 3103 7220 3103 7230
For implant C8 C9.5 C11 C14 C17Prod. no. for ratchet 3103 3233 3103 3235 3103 3238 3103 3240 3103 3250
Scale: 1:1
Scale: 1:1
For implant D8 D9.5 D11 D14Prod. no. for ratchet 3103 3252 3103 3254 3103 3256 3103 3258
Scale: 1:1
17 mm14 mm11 mm
8 mm9.5 mm
Ratchet-operated instruments for thepreparation of the ANKYLOS® specialthread. They must be used according tothe diameter of insertion and feature ringmarkings in the working area. Due to the non-cutting tip the taps cannotgo beyond the depth of the preparedimplant bed.
ANKYLOS_Prodkat_6-252004_E1.qxd:ANKYLOS_Prodkat_6-252004_E.qxd 11.01.2008 16:00 Uhr Seite 9
10
ANKYLOS® Instruments: Surgery
Extra long instruments Facilitate access to anterior and posterior operating sites in the maxilla
3103 3095 Handle for instruments, extra long3103 3123 Insertion handle for implants, extra long
ATP punch(Atraumatic Transgingival Perforation): Trepanation of soft tissue using a rotating sleeve punch – prepares a purchase point in alveolar ridge simultaneously
3103 4090 ATP punch 3103 4091 Sleeve for ATP punch
Sinus lifting instruments3103 6350 Tray sinus lifting instruments3103 4510 Elevator 013103 4520 Elevator 023103 4530 Elevator 033103 4540 Membrane elevator, small3103 4550 Membrane elevator, large3103 4560 Membrane elevator, small, double bend3103 4570 Chisel3103 4580 Surgical mallet for sinus lifting
Paralleling gaugesFor determining the abutment angulation intraoperatively
3103 6380 Surgery-Tray Direction Gauge
Sets of 4 paralleling gauges (not shown)3103 4210 Direction gauge surgery 0°3103 4220 Direction gauge surgery 7,5°3103 4230 Direction gauge surgery 15°3103 4240 Direction gauge surgery 22,5°3103 4250 Direction gauge surgery 30°3103 4260 Direction gauge surgery 37,5°
Product no. Description Fig.
12
3
456789
101112
13
Fig.: reduced scale
1
2
3
4
5
67
8
9
10
11
12
13
ANKYLOS_Prodkat_6-252004_E1.qxd:ANKYLOS_Prodkat_6-252004_E.qxd 11.01.2008 16:00 Uhr Seite 10
11
1234
567
8
9
1011
BoneExpander/BoneCondenserEnables implants to be placed in areas where inadequatebone is available horizontally, but without having to augmentthe area. The spongiosa zone between the labial and palatalcortical layers must still be intact.
BoneExpanders with D-shaped cross-sections enable the labialand palatal bone layers to be spread for placing the implantsin one stage. Four widths of instrument are used in succession.
BoneCondensers with a round cross-section shape a bonycavity with the same diameter as the implant selected. The BoneCondensers can also be used for sinus lifting.
3103 4310 BoneExpander, size 013103 4320 BoneExpander, size 023103 4330 BoneExpander, size 033103 4340 BoneExpander, size 04
Straight Bayonet 3103 4350 3103 4352 Site Marker3103 4360 3103 4362 Pilot BoneCondenser3103 4370 3103 4372 BoneCondenser,
A implants3103 4380 3103 4382 BoneCondenser,
B implants3103 4390 3103 4392 BoneCondenser,
C implants
3103 6300 Surgery-Tray BoneExpander3103 6320 Surgery-Tray BoneCondenser3103 6325 Surgery-Tray BoneCondenser, bayonet
Product no. Description Fig.6
Fig.: reduced scale
1
2
34
78
9
10
11
5
ANKYLOS_Prodkat_6-252004_E1.qxd:ANKYLOS_Prodkat_6-252004_E.qxd 11.01.2008 16:00 Uhr Seite 11
FRIOS® Surgical units
12
Product no Description
Suitable for FRIOS® Unit S/i:90 – 6710 FRIOS® Contra-angle Handpiece WI-75 20:190 – 6720 FRIOS® Contra-angle Handpiece WS-75 20:1, demountable90 – 6730 FRIOS® MicroSaw 75 Protector, for FRIOS® Contra-angle Handpiece WI-75
and FRIOS® Contra-angle Handpiece WS-75, demountable90 – 6741 FRIOS® MicroSaw ExpertSet WI-75
Complete equipment, FRIOS® Handpiece Angled, FRIOS® Handpiece Straight, FRIOS® Contra-angle Handpiece WI-75 and FRIOS® MicroSaw 75 Protector
90 – 6742 FRIOS® MicroSaw ExpertSet WS-75Complete equipment, FRIOS® Handpiece Angled, FRIOS® Handpiece Straight, FRIOS® Contra-angle Handpiece WS-75, demountable and FRIOS® MicroSaw 75 Protector
90 – 6751 FRIOS® MicroSaw StarterSet WI-75Complete equipment with FRIOS® Contra-angle Handpiece WI-75 and FRIOS® MicoSaw 75 Protector. Order No. 90 – 5030 or 90 – 5050 has to be added.
90 – 6752 FRIOS® MicroSaw StarterSet WS-75Complete equipment with FRIOS® Contra-angle Handpiece WS-75, demountable and FRIOS® MicoSaw 75 Protector. Order No. 90 – 5030 or 90 – 5050 has to be added.
Suitable for FRIOS® Unit S/i and FRIOS® Unit S:90 – 5030 FRIOS® Handpiece Straight 1:190 – 5050 FRIOS® Handpiece Angled 1:190 – 5031 FRIOS® MicroSaw Protector Handpiece Straight
FRIOS® Unit S/i – The surgical unit for implant treatment
FRIOS® Handpieces, Contra-angle Handpieces and FRIOS®MicroSaw*
• Pre-set implant programme, individual setting possible• Touch-free programme selection possible
Product no Description
90 – 6600 FRIOS® Unit S/i V 220 – 240 ACEquipment supplied:FRIOS® Unit S/i with Surgical Motor (cable length 1.8 m), stand for Instruments, stand, ON/OFF foot control, mains supply,hose fittings, sterilization protector, set of hose rings (5 items),locking pin for surgical motor
90 – 6620 FRIOS®Unit S/i surgical motor (cable length 1.8 m)90 – 6630 FRIOS® Unit S/i foot control (ON/OFF)90 – 6430 FRIOS® Unit S/i/FRIOS® Unit S/FRIOS® Unit E Mains Supply Europe
V 220 – 240 AC 90 – 6440 FRIOS® Unit S Coolant Hose motor cable 1.8 m (5 pieces),
also suitable for FRIOS® Unit S/i and W+H implantmed 90 – 6441 FRIOS® Unit S Coolant Hose motor cable 3.5 m (3 pieces)
also suitable for FRIOS® Unit S/i and W+H implantmed
For more accessories for FRIOS® Unit S/i, FRIOS® Unit S, FRIOS® Handpieces and Contra-angle Handpieces and FRIOS® MicroSaw*please see also the FRIADENT product catalogue or at www.friadent.com
* FRIOS® MicroSaw according to Prof. Dr. F. Khoury
ANKYLOS_Prodkat_6-252004_E1.qxd:ANKYLOS_Prodkat_6-252004_E.qxd 11.01.2008 16:00 Uhr Seite 12
13
ANKYLOS® Instruments: Implant recovery
Unscrew instrument for cover screwsCan be inserted into the handle for screwdrivers. Self-cutting, screw-in instrumentfor safe removal of cover screws
3103 3434 short3103 3435 long
3103 3439 Screwdriver insert for cover screws
Product no Description Fig.
Product no Description
3103 6100 Recovery tray, (complete)
Product no Description
3103 4110 2nd stage Instrument 1 Raspatorium3103 4120 2nd stage Instrument 2 Probe3103 4130 2nd stage Instrument 3 Curette, small3103 4140 2nd stage Instrument 4 Curette, large
Single instruments
Implant recovery cassetteThis implant recovery cassette is based on a recentlydeveloped instrument set, specifically matched to thedesign concept of the conical connector, for exposingANKYLOS® implants minimally invasively to conserve softtissue. This cassette contains unscrewing instruments for cover screws, sulcus former screwdrivers and an areafor keeping sulcus formers.
1
3
2
1 2 3
ANKYLOS_Prodkat_6-252004_E1.qxd:ANKYLOS_Prodkat_6-252004_E.qxd 11.01.2008 16:00 Uhr Seite 13
14
ANKYLOS® Abutments: Balance Anterior
Sulcus Former for Balance Anterior All sulcus formers and abutments are made of high strength Ti6Al4V as described in ISO 5832/III and aresupplied non-sterile for single use.Balance-Anterior Sulcus Formers are manufactured in two parts and can be customized and tightened inthe required position in the internal thread of the implant.
Screw for sulcus former Balance Anterior Description 1.5, small 3.0, small 1.5, large 3.0, large 1.5 3.0Product no. 3102 1510 3102 1515 3102 1520 3102 1525 3102 1505 3102 1507
Scale: 1.5:1
Description small/1.5/straight small/3.0/staight large/1.5/straight large/3.0/straight small/1.5/15° small/3.0/15° large/1.5/15° large/3.0/15°Ø5.5/H6.5 Ø5.5/H6.5 Ø7/H7.5 Ø7/H7.5 Ø5.5/H6.5 Ø5.5/H6.5 Ø7/H7.5 Ø7/H7.5
Product no. 3102 1550 3102 1560 3102 1570 3102 1580 3102 1590 3102 1600 3102 1610 3102 1620
Scale: 1.5:1
* with Screw
*available summer 2007
* * * *
Description small/1.5/straight small/3.0/straight large/1.5/straight large/3.0/straight small/1.5/15° small/3.0/15° large/1.5/15° large/3.0/15°Ø5.5/H6.5 Ø5.5/H6.5 Ø7/H7.5 Ø7/H7.5 Ø5.5/H6.5 Ø5.5/H6.5 Ø7/H7.5 Ø7/H7.5
Product no. dentin 3102 3311 3102 3316 3102 3351 3102 3356 3102 3331 3102 3336 3102 3371 3102 3376
Scale: 1.5:1
CERCON® Balance AnteriorCERCON® Balance with the superior strength of zirconium oxide as described in ISO 13356.15 Ncm torque is recommended for the central straining screw. Screwdriver: 1.0 mm hexagon.
Description small/1.5/straigt small/3.0/straigt large/1.5/straigt large/3.0/straigt small/1.5/15° small/3.0/15° large/1.5/15° large/3.0/15°Ø5.5/H6.5 Ø5.5/H6.5 Ø7/H7.5 Ø7/H7.5 Ø5.5/H6.5 Ø5.5/H6.5 Ø7/H7.5 Ø7/H7.5
Prod. neutral 3102 3010 3102 3015 3102 3050 3102 3055 3102 3030 3102 3035 3102 3070 3102 3075no. dentin 3102 3310 3102 3315 3102 3350 3102 3355 3102 3330 3102 3335 3102 3370 3102 3375
Scale: 1.5:1
Balance Anterior AbutmentsBalance Anterior Abutments are designed anatomically. All abutments have a 1 mm, circumferential shoulder,straight and 15° abutments are available. The superstructure can be retained with a lateral screw (M1 X 0.2thread). A torque of 15 Ncm is recommended for the straining screw. Screwdriver: 1.0 mm hexagon.
Balance Temporary Abutment*Abutments out of PEEK/ZrO2 for temporisations up to 6 months.The recommended torque for the fastening screw is 15 Ncm. Screwdriver 1.0 hexagonal.
ANKYLOS_Prodkat_6-252004_E1.qxd:ANKYLOS_Prodkat_6-252004_E.qxd 11.01.2008 16:00 Uhr Seite 14
15
Balance Posterior
Sulcus Former for Balance Posterior All sulcus formers and abutments are made of high strength Ti6Al4V as described in ISO 5832/III and are supplied non-sterile for single use. Balance Posterior Sulcus Formers are manufactured in one part andwound into the thread in the implant. The same sulcus formers are used for the straight and the preangledabutments as well as the Balance Base Abutments. Screwdriver: 1.0 mm hexagon.
Description 0.75 1.5 3.0 4.5Product no. 3102 1528 3102 1530 3102 1535 3102 1540
Scale: 1.5:1
Angulation straight 7.5° 15° 22.5° 30° 37.5°Product no. 3102 1625 3102 1647 3102 1648 3102 1652 3102 1654 3102 1659
Sulcus height 0.75
Scale: 1.5:1
Angulation straight 7.5° 15° 22.5° 30°Product no. 3102 1630 3102 1649 3102 1650 3102 1653 3102 1655
Sulcus height 1.5
Scale: 1.5:1
Angulation straight 15°Product no. 3102 1640 3102 1660
Sulcus height 3.0
Scale: 1.5:1
Angulation straight 15°Product no. 3102 1645 3102 1665
Sulkushöhe 4,5
Scale: 1.5:1
Balance Posterior AbutmentsBalance-Posterior Abutments have a 1 mm, circumferential shoulder. The superstructure can be retained with a lateral screw (M1 X 0.2 thread). A torque of 15 Ncm is recommended for the straining screw. Screwdriver: 1.0 mm hexagon.
ANKYLOS_Prodkat_6-252004_E1.qxd:ANKYLOS_Prodkat_6-252004_E.qxd 11.01.2008 16:00 Uhr Seite 15
16
ANKYLOS® Abutments: Balance Base Abutments,Transfer
Description Balance Base Abutment0.75 1.5 3.0 4.5
Product no. 3102 1668 3102 1670 3102 1680 3102 1690
Balance Base Abutments These abutments consist of high strength Ti6Al4V as described in ISO 5832/III, are supplied non-sterileand are for single use, as are the bar copings and soldering analogs.Balance-Base Abutments taper at an angle of 15°, which provides for a wide range of angles of insertioneven if the abutments are non-parallel. At least two of these abutments must be used. The superstructure isalways screw-retained from the occlusal aspect. As these abutments are made in one piece, they do nothave a straining screw and are inserted with a special, 1,8 mm hexagonal insertion key. A torque of 25 Ncm is recommended.
Scale: 1.5:1
Description Wax-up Bar coping incl. hex screw Retention cap Solderingcoping Permador® PDF Degunorm® Ti6Al4V Abutment
Product no. 3104 5320 3105 6200 3105 6210 3105 6215 3104 5330
Scale: 1.5:1
Transfer Components for all Parts of the Balance SystemThe transfer components consist of surgical steel and the transfer screws of Ti6Al4V. The transfercomponents are supplied non-sterile for single use only. When using the Balance System, the implantposition is transferred with screw-retained components. The abutment is retained with an occlusal screwand an “open tray” is used. A transfer post in a “closed” tray can also be used for repositioning (indicatedif the implants are not parallel).
Scale: 1.5:1
Accessories for Balance Base Abutments
Description short long short longProduct no. 3104 5410 3104 5412 3104 5400 3104 5402 3104 5415 3104 5416 3104 5270
Transfer post Transfer screw Implantanalog A
Repositioningpost
Repositioningpost, narrow
ANKYLOS_Prodkat_6-252004_E1.qxd:ANKYLOS_Prodkat_6-252004_E.qxd 11.01.2008 16:01 Uhr Seite 16
17
Abutments: SynCone®
SynCone® abutments SynCone® – The revolutionary treatment concept for immediate loading: Patient-specific. High grade. Cost-effective. This minimally invasive treatment allows the denture to be placed while the anaesthetic is still effective. No special implant or instruments are required and the operator is free to decide on analternative type of conventional restoration.
Due to the reproducible, standardised procedure, a SynCone® can also be used as a prefabricated retaineron healed ridge implants.
SynCone® abutments are available with 4° or 6° conical heads, made of high strength Ti6Al4V asdescribed in ISO 5832/III, supplied non-sterile and are for single use.
Description 1.5/straight 3.0/straight 4.5/straight 1.5/15° 3.0/15° 4.5/15°Prod no. 4° Conical 3102 1712 3102 1722 3102 1732 3102 1772 3102 1782 3102 1792Prod no. 6° Conical 3102 1710 3102 1720 3102 1730 3102 1770 3102 1780 3102 1790
Scale: 1.5:1
Scale: 1.5:1
Description 1.5/22.5°Prod no. 4° Conical 3102 1912
Scale: 1.5:1
Description Taper cap for Polymerisation Drilling sleeve Parallel GaugeSynCone® sleeve for for SynCone® for SynCone®
Degulor® 3406 SynCone® (Ti6Al4V)with retention
Prod no. 4° Conical 3102 1752 3102 1405 3104 5490 3103 3620Prod no. 6° Conical 3102 1750 3103 3618
* Dental silicone
*
ANKYLOS_Prodkat_6-252004_E1.qxd:ANKYLOS_Prodkat_6-252004_E.qxd 11.01.2008 16:01 Uhr Seite 17
18
ANKYLOS® Abutments with snap attachment
ANKYLOS® Abutments without sulcus height
complete with snap attachment snap Transfer cap Laboratory Description a /1.5 a /3.0 a /4.5 (Permador®) not neccessary analogProduct no. 3102 1300 3102 1310 3102 1320 3102 1312 3104 5220single without snap 3102 1301 3102 1311 3102 1321
Scale: 1.5:1
Sulcus formers Permador® abutment Central screw hex for B.-PosteriorDescription A B C conical Permador® abutment 0.0 straightProduct no. 3102 1450 3102 1452 3102 1454 3102 1440 3102 1431 3102 1445
Transfer Transfer screw Implant analogabutment forPermador®
Description abutment short long A B CProduct no. 3104 5250 3104 5400 3104 5402 3104 5270 3104 5272 3104 5274
Sulcus formers and abutments
Transfer Implant analogs
The special insertion key for abutments with snap attachments should be used for inserting the abutments.The abutments are made of high strength Ti6Al4V as described in ISO 5832/III and are supplied non-sterile for single use.
Abutments without sulcus height are indicated for specific cases where the alveolar mucosa is extremely thinand does not provide the minimal requirements for forming dense soft tissue around the abutment. Theseabutments enable to start the prosthetic restoration directly from the implant and even can extend the crownmargin to the peripheral implant margin. The abutment Balance posterior 0,0 offers the stability of the taper connection and consists like the sulcusformer and screws of Ti6Al4V. The Permador abutment is made of cast-on Permador® and engages into thegrooves of the implant’s top surface.The transfer components consist of surgical steel. All components aresupplied non-sterile for single use.
ANKYLOS_Prodkat_6-252004_E1.qxd:ANKYLOS_Prodkat_6-252004_E.qxd 11.01.2008 16:01 Uhr Seite 18
19
Abutments: Standard Abutments
Sulcus formers for Standard abutmentsAll sulcus formers and abutments are made of high strength Ti6Al4V as described in ISO 5832/III and aresupplied non-sterile for single use.Like the Balance System sulcus formers, the compact sulcus formers are wound into the inner thread of theimplant once it has been opened. Alternatively, standard sulcus formers can be wound into the inner threadof the cover screw before opening the implant (also for transgingival implant healing). Screwdriver 1.0 mmhexagon. Sulcus formers are intended for single use.
Description a/1.5 a/3.0 a/4.5 a/6.0 b/1.5 b/3.0 a/1.5 a/3.0 b/1.5 b/3.0 compact compact compact compact compact compact standard standard standard standard
Product no. 3102 1011 3102 1021 3102 1026 3102 1028 3102 1031 3102 1041 3102 1010 3102 1020 3102 1030 3102 1040
Straight abutmentsStraight, standard abutments are inserted with insertion keys for “a” abutments or “b” abutments. The M 1.6 occlusal thread is for fixing the superstructure in place.
Preangled abutments15° standard abutments are fixed in the correct position with a positioning key for preangled abutments andtightened by applying 1.5 Ncm to the straining screw. Screwdriver: 1.0 mm hexagon. The superstructuresare retained by the M1 X 0.2 lateral thread.
Description a/1.5/4.0 15° a/1.5/6.0 15° a/3.0/4.0 15° a/3.0/6.0 15° b/1.5/4.0 15° b/1.5/6.0 15° b/3.0/4.0 15° b/3.0/6.0 15°Product no. 3102 1130 3102 1140 3102 1150 3102 1160 3102 1170 3102 1180 3102 1190 3102 1200
Scale: 1.5:1
Description a/1.5/4.0 a/1.5/6.0 a/3.0/4.0 a/4.5/4.0 a/6.0/4.0 a/3.0/6.0 b/1.5/4.0 b/1.5/6.0 b/3.0/4.0 b/3.0/6.0Product no. 3102 1050 3102 1060 3102 1070 3102 1076 3102 1078 3102 1080 3102 1090 3102 1100 3102 1110 3102 1120
Scale: 1.5:1
Scale: 1.5:1
ANKYLOS_Prodkat_6-252004_E1.qxd:ANKYLOS_Prodkat_6-252004_E.qxd 11.01.2008 16:01 Uhr Seite 19
For abutments a/1.5/4.0 a/1.5/6.0 b/1.5/4.0 b/1.5/6.0 a/1.5/4.0 a/1.5/6.0 b/1.5/4.0 b/1.5/6.0a/3.0/4.0 a/3.0/6.0 b/3.0/4.0 b/3.0/6.0 a/3.0/4.0 a/3.0/6.0 b/3.0/4.0 b/3.0/6.0
Axis straight straight straight straight 15° 15° 15° 15°Product no. 3104 5061 3104 5071 3104 5081 3104 5091 3104 5101 3104 5111 3104 5121 3104 5131
For abutments a/1.5/4.0 a/1.5/6.0 b/1.5/4.0 b/1.5/6.0 a/1.5/4.0 a/1.5/6.0 b/1.5/4.0 b/1.5/6.0a/3.0/4.0 a/3.0/6.0 b/3.0/4.0 b/3.0/6.0 a/3.0/4.0 a/3.0/6.0 b/3.0/4.0 b/3.0/6.0
Axis straight straight straight straight 15° 15° 15° 15°Product no. 3104 5140 3104 5150 3104 5160 3104 5170 3104 5142 3104 5152 3104 5162 3104 5172
ANKYLOS® Standard Abutments, Laboratoryand Auxiliary Parts
20
Laboratory analog two-pieceTwo-piece laboratory analogs are made of aluminium (sleeve) and the removable analog (surgical steel).
Scale: 1.5:1
For optimal result, the analog sleeves and the abutment analogs must only be used once!Do not excert tension on the abutment analogs when pulling them out of the analog sleeves.
Laboratory analog one-pieceWith the Standard- Abutment system implant prosthetics are fabricated on analogs of the abutments. The one-piece laboratory analog are made of surgical steel. They serve as analogs to fabricale models and to fix gold copings in the soldering model.
Scale: 1.5:1
Scale: 1.5:1
Temporary capsPlastic caps (POM) building up temporaryrestorations. Temporary caps are for use withboth straight and preangled abutments.
Transfer caps (PC)The impression caps for standard abutments made of poly-carbonate fit straight and 15° abutments. These caps areeither retained on the abutments or screwed to straightabutments from the occlusal aspect using long-head screws.The four sizes of impression caps are colour-codedfacilitate visual identification.
For abutments Wax-up screw a/1.5/4.0 a/1.5/6.0 b/1.5/4.0 b/1.5/6.0 a/1.5/4.0 a/1.5/6.0 b/1.5/4.0 b/1.5/6.0long a/3.0/4.0 a/3.0/6.0 b/3.0/4.0 b/3.0/6.0 a/3.0/4.0 a/3.0/6.0 b/3.0/4.0 b/3.0/6.0
Product no. 3104 5213 3104 5011 3104 5021 3104 5031 3104 5041 3104 5280 3104 5290 3104 5300 3104 5310
Impression caps are for single-use only. If they are used several times, the precision of the impression will be impaired!
ANKYLOS_Prodkat_6-252004_E1.qxd:ANKYLOS_Prodkat_6-252004_E.qxd 11.01.2008 16:01 Uhr Seite 20
21
Scale: 1.5:1
Wax-up copings (resin)The wax-up copingts made of POM come with the drill holes for screw-retained superstructures as wellocclusal as lateral.The drill hole wich is not used, both in case of cemented superstructures, is covered withwax.The white copings for single crowns include ribs to prevent them from rotating. The grey copings forbridges do not include these ribs.
For abutments a/1.5/4.0 a/1.5/6.0 b/1.5/4.0 b/1.5/6.0 a/1.5/4.0 a/1.5/6.0 b/1.5/4.0 b/1.5/6.0a/3.0/4.0 a/3.0/6.0 b/3.0/4.0 b/3.0/6.0 a/3.0/4.0 a/3.0/6.0 b/3.0/4.0 b/3.0/6.0
Axis straight and 15°, single crowns straight and 15°, for bridgesProduct no. 3104 5180 3104 5190 3104 5200 3104 5210 3104 5182 3104 5192 3104 5202 3104 5212
Scale: 1.5:1
Incl. interiorgrooves
Excl. interior grooves
For abutments a/1.5/4.0 a/1.5/6.0 b/1.5/4.0 b/1.5/6.0 a/1.5/4.0 a/1.5/6.0 b/1.5/4.0 b/1.5/6.0a/3.0/4.0 a/3.0/6.0 b/3.0/4.0 b/3.0/6.0 a/3.0/4.0 a/3.0/6.0 b/3.0/4.0 b/3.0/6.0
Axis straight Degunorm® straight Permador®
Product no. 3105 6160 3105 6170 3105 6180 3105 6190 3105 6100 3105 6110 3105 6120 3105 6130
Gold copingsFor use on straight Standard abutments. These gold copings consist of Degunorm® or of Permador® which issuitable for casting-on. A fixation screw is supplied with the gold coping.
Constituents of the precious alloys
Au Pt Pd Ag Cu Zn Ir In TEC
Degunorm® 73.8 9.0 9.2 4.4 2.0 0.1 1.5 16.8Permador® 60 24.9 15 0.1 12.4Permador® PDF 60 39 1 12.1Degulor® 3406 65.0 8.9 1.0 13.0 11.5 0.5 0.1 – –
ANKYLOS_Prodkat_6-252004_E1.qxd:ANKYLOS_Prodkat_6-252004_E.qxd 11.01.2008 16:01 Uhr Seite 21
22
ANKYLOS® Screws
Headless screw Retaining screwsTorque – 10 Ncm 10 Ncm 10 Ncm – 10 NcmThread M 1.6 M 1.6 M 1.6 M 1 x 0.2 M 1.6Screwdriver (Prod. no.) 3103 3460 3103 3455 3103 3450 3103 3455 3103 3450Product no. 3105 6010 3105 6021 3104 5211 3104 5213 3105 6051 3105 6052 3105 6140Balance-System B-base abutment B-base abutment anterior+posterior anterior+posteriorStandardsystem straight abutments straight abutments straight abutments 15° abutments 15° abutments straight abutments
Retaining screws: Prosthetics (Ti6Al4V)
Individual screw retention
occlusal
Screw withhexagon socket
For closing the occlusalthread
lateral
Screw withhexagon socket
Ring fitting
Ring fitting made of Permador®
Gold copings
Slotted screw forgold copings
Scale: 1.5:1
Wax-up screw
short long
Screws: Surgeryfor fixation of membranes in the implant’s cover screw. Made out of Ti6Al4V.
Description membrane screw membrane screw membrane screw cover screwØ Ø 3.5 mm Ø 6.0 mm Ø 6.0 mm for sinus lift (spare part)Product no. 3101 0110 3101 0120 3101 0130 3101 0080
Description Threaded sleeve Threaded sleeve Threaded sleeve Splinting screw Splinting screw Splinting screw short medium long short medium long
Material Permador® PDF Permador® PDF Permador® PDF Ti6Al4V Ti6Al4V Ti6Al4VProduct no. 3105 6220 3105 6230 3105 6240 3105 6250 3105 6260 3105 6270
Scale: 1.5:1
Scale: 1.5:1
Instruments for individual screw retention
Description Drill guide tube End-cutting drill Tap Handle forM2 technical tap
Product no. 3103 3550 3103 3557 3103 3565 3103 3425
Scale: 1.5:1
ANKYLOS_Prodkat_6-252004_E1.qxd:ANKYLOS_Prodkat_6-252004_E.qxd 11.01.2008 16:01 Uhr Seite 22
23
ANKYLOS® Basic equipment: Prosthetics
Prosthetic TrayThe new prosthetic tray is based on an ergonomic peg traymade of anodized aluminium which provides for more efficientworking and increased safety as the instruments are arranged inthe order in which they are used. This tray centres around aprosthetic ratchet with torque control devices. The torque controldevices can also be used by hand, which doubles their range ofapplications.
Trial Abutments Standard Abutment systemTrial abutments out of resin indicate the right abutment for theStandard Abutment System: They offer the fast selection ofangulation, diameter, height of sulcus and abutment. The abutments will only be stucked into the implant and can besterilized. The Trial Abutments can be used in the laboratory aswell to estimate angulation and height of the sulcus for BalanceAbutments.
Product no. Description
3103 6120 Prosthetic Tray3103 6140 Prosthetic Tray, Balance abutment system3103 6150 Prosthetic Tray, Standard abutment system3103 6165 Prosthetic Tray, mini
Product no. Description
3104 5500 Trial Abutment Tray Standard Abutments(with 64 trial abutments)
Single abutments in a set of 4 (not shown)straight 15° Description colour
3104 5550 3104 5630 Trial Abutment a/1,5/4,0 red3104 5560 3104 5640 Trial Abutment a/1,5/6,0 yellow3104 5570 3104 5650 Trial Abutment a/3,0/4,0 red3104 5580 3104 5660 Trial Abutment a/3,0/6,0 yellow3104 5590 3104 5670 Trial Abutment b/1,5/4,0 blue3104 5600 3104 5680 Trial Abutment b/1,5/6,0 green3104 5610 3104 5690 Trial Abutment b/3,0/4,0 blue3104 5620 3104 5700 Trial Abutment b/3,0/6,0 green
Laboratory Trial AbutmentsBalance Posterior
Product no. Description
3104 5710 Laboratory Trial Abutment Tray Balance Posterior (with 60 trial abutments)
Assembly example, contents see price list
ANKYLOS_Prodkat_6-252004_E1.qxd:ANKYLOS_Prodkat_6-252004_E.qxd 11.01.2008 16:01 Uhr Seite 23
24
ANKYLOS® Instruments: Prosthetics
The prosthetic instruments meet the needs of all superstructureand superstructure elements. Just like the surgical instrumentsthe prosthetic instruments are made of high-quality, corrosion-resistant material.
3103 3360 Cooling deviceFor chilling the connection con of the abutments
3103 3400 Hexagon screwdriver, 1 mm
Handle for screwdriver3103 3410 Standard, Ø 7 mm3103 3415 Standard, Ø 12 mm
Unscrew instrument for cover screwsCan be inserted into the handle for screwdrivers. Self-cutting, screw-in instrument for safe removal of cover screws
3103 3434 short3103 3435 long
3103 3450 Screwdriver insert, 1.6 mm blade* For fastening slot screws
3103 3455 Screwdriver insert, 1.0 mm hexagon*For all hexagon socket screws
3103 3456 Screwdriver insert, 1.0 mm hexagon*,short
3103 3460 Screwdriver insert, 1.0 mm blade*For inserting the headless screws with cemented suprastructures* Can be operated with low-speed contra-angle handpiece.
Insertion key3103 3471 for a-standard abutments, short 3103 3481 for b-standard abutments, short, 3103 3485 Positioning key for preangled Standard
abutments
3103 3501 Activation instrument for snap attachment3103 3502 Deactivation instrument for snap attachment
Product no. Description Fig.
Scale: 1:1
1
2
34
56
7
8
9
10
111214
1516
1 2 3 4
5 6 7 8 9 10
11 12
14
15 16
ANKYLOS_Prodkat_6-252004_E1.qxd:ANKYLOS_Prodkat_6-252004_E.qxd 11.01.2008 16:01 Uhr Seite 24
25
3103 3630 Prosthetic ratchet3103 3632 Mounting device for prosthetic ratchet inserts
3103 3621 Insert for Prosthetic ratchet for a abutments3103 3622 Insert for Prosthetic ratchet for b abutments3103 3623 Insert for Prosthetic ratchet for balls and
sockets3103 3625 Insert for Prosthetic ratchet for 1.0 mm hex3103 3628 Insert for Prosthetic ratchet for 1.0 mm hex,
long3103 3626 Insert for Prosthetic ratchet for 1.0 mm hex,
short3103 3627 Insert for Prosthetic ratchet for 1.8 mm hex
3103 3640 Laboratory torque driver,torque 10 Ncm
3103 3570 Finisher for Balance Base Abutment3103 3580 Finisher for taper occlusal retention screw3103 3590 Finisher for taper lateral retention screw
3103 3602 Handle for abutment analogs and abutments
Product no. Description Fig.
12
345
715
9
14
101112
13
8
1
2
3 4 5 7 8
10
11
12
13
14
9 15
ANKYLOS_Prodkat_6-252004_E1.qxd:ANKYLOS_Prodkat_6-252004_E.qxd 11.01.2008 16:01 Uhr Seite 25
26
ANKYLOS® Training, demonstration aids
Product no. Description
3109 9200 Acrylic model, maxilla crown and bridge,3 implants excl. abutments.
3109 9240 Acrylic model, mandible edentulous, 4 implants excl. abutments.
3109 9330 Enlarged 5:1 model with holder and authentic implant
66 – 2506 CD-ROM ANKYLOS®
Powerpoint Presentation German/English
6 – 252043 CD-ROM SynCone® Immediate Loading, German/English
66 – 2507 CD ROM ANKYLOS®
Pictures and illustrations (High and low resolution)
66 – 3019 CD ROM Augmentation Pictures and illustrations (High and low resolution)
66 – 1037 CD ROM CERCON®/FRIADENT® plus Pictures and illustrations (High and low resolution)
66 – 1036 CD ROM DENTSPLY Friadent Pictures and illustrations (High and low resolution)
66 – 1038 CD ROM DENTSPLY Friadent Pictures and illustrations for internet and presentations (Low resolution)
ANKYLOS®
Presentations/Präsentationen
ANKYLOS®
Pictures and illustrations(High and low resolution)
Status 04/2006
Order No. 66-2507/002
Only to be used with copyright reference© FRIADENT GmbH 2005
AugmentationPictures and illustrations
(High and low resolution)Status 12/2005
Order No. 66-3019/001
Only to be used with copyright reference© FRIADENT GmbH 2005
CERCON®/FRIADENT® plusPictures and illustrations
(High and low resolution)Status 12/2005
Order No. 66-1037/001
Only to be used with copyright reference© FRIADENT GmbH 2005
DENTSPLY FriadentPictures and illustrations
(High and low resolution)Status 12/2005
Order No. 66-1036/002
Only to be used with copyright reference© FRIADENT GmbH 2005
Pictures and illustrations for internetand presentations
(Low resolution)Status 11/2006
DENTSPLY Friadent
Order No. 66-1038/003
Only to be used with copyright reference© FRIADENT GmbH 2005
ANKYLOS_Prodkat_6-252004_E1.qxd:ANKYLOS_Prodkat_6-252004_E.qxd 11.01.2008 16:01 Uhr Seite 26
FRIADENT Class I medical products
Class I medical products compliant with Directive 93/42/EEC are– non-active, handheld surgical and prosthetic instruments for implant placement and grafting– components for impression technique that do not remain in the patient’s mouth– non-active components for the planning phase
FRIADENT Class IIa, IIb, III medical products
Class IIa, IIb and III medical products compliant with Directive 93/42/EEC are– dental implants, membranes, membrane tacks and bone grafting materials– active surgical instruments for implant placement and grafting– components for impression technique and prosthetic restoration that remain in the patient’s mouth
Manufacturer:FRIADENT GmbH · P. O. Box 71 01 11 · 68221 Mannheim/GermanyPhone: + 49 621 4302-1288 · Fax: + 49 621 47 13 06e-Mail: [email protected] · Internet: http://www.friadent.de
FRIOS® Handpieces, FRIOS® Unit S/i, FRIOS® Unit S
Manufacturer: W&H Dentalwerk Bürmoos GmbH · A-5111 Bürmoos/Austria
27
Notes
0123
0297
ANKYLOS_Prodkat_6-252004_E1.qxd:ANKYLOS_Prodkat_6-252004_E.qxd 11.01.2008 16:01 Uhr Seite 27
Order No. 6-252004/014
FRIADENT GmbH · P. O. Box 71 01 11 · D-68221 Mannheim/GermanyPhone: + 49 621 4302-1288 · Fax: + 49 621 47 13 06e-Mail: [email protected] · Internet: http://www.friadent.de
1107
14/G
VD
ANKYLOS_Prodkat_6-252004_E1.qxd:ANKYLOS_Prodkat_6-252004_E.qxd 11.01.2008 16:01 Uhr Seite 28