Product Catalogma2ndanismanlik.com/wp-content/uploads/2020/06/TOBLER_Catalo… · TOBLER is a worlwide leader in workholding solutions with high quality and precision expanding mandrels

Product Catalog

TOBLER is a worlwide leader in workholding solutions with high quality and precision expanding mandrels and chucks.

This position is the result of extensive experience based on two golden rules; research of excellence in new product development and continuous high level of cooperation with customers. Tobler products are designed for optimum efficiency and benefit from the application of the most recent technologies. They are renowned for their long life and reliability.

With Tobler you will optimize economical batch production by reducing setting-up time and number of operations, hence reducing machining time. The groundwork is carried out in Tobler’s experienced Design Office, acting as a proper engineering division, working in close relation with customers.

Tobler can approach specific problems from a wide variety of companies and offer the most profitable solutions.

Major companies in the in the automotive, agricultural, aerospace industries rely on our attentive and complete service.

TOBLER S.A.S designs, manufactures and commercializes workholding solutions for the worldwide automotive, aerospace, agricultural, medical, nuclear, armamanent, energy and machine tool builders industries since its foundation in 1945.

In 1979, TOBLER S.A.S was owned by the company SANDVIK, it has grown since then and the name “TOBLER” is recognized for its durable and reliable products.

TOBLER S.A.S has joined the ALTIFORT Group within the ALTIMOTION division in 2017, the industrial synergy with the different subsidiaries of the Group offers a complete service to your Teams.

Engineering and Manufacturing of Workholding Solutions

2 tobler

tobler 32 tobler

STANDARD EXPANDING MANDRELS

Face DRIVERS

CUSTOM CHUCKS AND MANDRELS

MILLING FIXTURES

STANDARD EXPANDING MANDRELSSTANDARD EXPANDING MANDRELSThis is the precision mandrel line-up that offers the optimal solution for customers who are looking for the highest quality, accuracy and rigidity in work holding.

By promoting the standardization of parts to the greatest extent possible, we can realize effective solutions of the highest level at minimal cost.

Face DRIVERS STANDARD FACE DRIVERSThis is the line-up of standard face drivers that offer the optimal solution: the maximum production capabilities combined with the maximum quality, accuracy and rigidity.

By using them together with a live center you can drive material whose full length is to be machined, shortening machining time and setup time.


MILLING FIXTURES

CUSTOM CHUCKS AND MANDRELSThis is our line-up of custom chucks and mandrels, which incorporate many original ideas including our patented systems, and which enable shortening of setup time and reliable chucking.

MILLING FIXTURESOur clamping systems allow to locate and to hold one or more parts during milling operations.

4 tobler

STANDARD EXPANDING MANDRELS...................5

STANDARD FACE DRIVERS .......................................44

CUSTOM CHUCKS AND MANDRELS ..................55

MILLING FIXTURES ................................................... 62-63

EXPANDING MANDRELS FOR MOUNTING BETWEEN CENTRES[TEP, TEPN, TMEP] ....................................................................6-13

MORSE TAPER TYPE EXPANDING MANDREL[TMCMN, TMCM, TMCMT] ......................................................14-19

MANDRELS FOR FLANGE MOUNTING[TMTP, TMDI, TMTPN, TMASIT].............................................. 20-32

Accessories Supplied with TMTPN, TMDI, TMTP and TMASIT Type MandrelsFlange adaptors for spindle nose mountingCentering plates for mandrels ...........................................................33

COLLET CHUCKS (TCC, TCCP)............................................................................ 34-43

Applicable workpieces: Small-diameter workpieces[HD type face drivers] ............................................................. 46-47

Applicable workpieces: Large-diameter workpieces[N type face drivers] ............................................................... 48-49

Applicable workpieces: Large-diameter workpieces[COMBI type face drivers] ...................................................... 50-51

Spare Parts / Accessories ...................................................... 52-53

Examples of face drivers built to order .........................................54

[TMS, TMR] ...................................................................................56

[TMRBE, TMAD] ............................................................................57

[TMAC, TMADC] ............................................................................58

[TMAP, TMAS] ...............................................................................59

[TMABT, TMAM] ............................................................................60

[TBAS] ...........................................................................................61

4 tobler tobler 5

STANDARD EXPANDING MANDRELS

nMandrels

For M, N, and MDI type mandrels

Vulcanization of the coating of the expanding sleeve grooves, nickel coating of the expanding sleeve, etc. are available as optionsMandrels able to accommodate large-diameter workpieces, and mandrels of a length or shape specified by the customer can be made to order

Standard line-up

EP: Expanding sleeve type TEP mandrels

Feature substantial expansibility and are used for inspections and grinding.

M: Expanding sleeve type M mandrels (TMEP, TMCM, TMCMT, TMTP)

Feature high clamping torque and are used for general machining.

N: Expanding sleeve type N mandrels (TEPN, TMCMN, TMTPN)

This is a series that can hold workpieces with the smallest diameter upward.

MDI: Expanding sleeve type MDI mandrels (TMDI)

The workpiece does not move in the axial direction during expansion.

MIT: Expanding sleeve type TMASIT mandrels

Suitable for medium to large lot production.

Internal clampingTotal permissible error for

internal clamping: 0.01 mm (T.I.R.)

STANDARD EXPANDING MANDRELS...................5

6 tobler6 tobler

EXPANDING MANDRELS FOR MOUNTING BETWEEN CENTRES

Mandrels for clamping workpieces between centers equipped with precision-ground centers and a flat surface for mounting a driving dogGuaranteed accuracy within stipulated expansion range: 0.01 mm (T.I.R.)Expanding sleeve hardness: 48 HRCWith TMEP mandrels, the advance end is not supported by an arbor and for this reason they are not recommended for clamping short workpieces.

When placing an order for arbors and expanding sleeves, please provide the order codes individually. They will be shipped without being assembled.

Arbor

Expanding Sleeve

nExpanding mandrels for mounting between centres

Clamping takes place as follows:

Place the workpiece in the center of the expanding sleeve, and slide the expanding sleeve until the workpiece is lightly clamped, then tap the rear end of the tapered arbor with a piece of wood to obtain tighter clamping.To separate the workpiece from the expanding sleeve, hold the workpiece and expanding sleeve in one hand and tap the smaller end of the arbor.

TEP Pages 8 and 9

TEP mandrels, the most basic in the range of mandrels for mounting workpieces between centers, consist of a tapered arbor and an expanding sleeve. They are used mainly for turning, grinding, balancing and inspection operations. They offer a high degree of expansibility, 1.5 to 5 mm, depending on the diameter of the expanding sleeve, and can clamp workpieces with diameters ranging from 8 to 235 mm.

Pages 8 and 9

TEP mandrels, the most basic in the range of mandrels for mounting workpieces between centers, consist of a tapered arbor and an expanding sleeve. They are used mainly for turning, grinding, balancing and inspection operations. They offer a high degree of expansibility, 1.5 to 5 mm, depending on the diameter of the expanding sleeve, and can

6 tobler tobler 7

Stan

dard

Exp

and

ing

Man

drels

6 tobler

TMEP Pages 12 and 13

TMEP mandrels are intended for turning, milling, grinding, shaving, gear cutting and inspection operations.

You can use a variety of types of workstop that are matched to the shape of the workpiece. They offer an expansibility of 1 to 2 mm depending on the diameter of the expanding sleeve, and can clamp workpieces with diameters ranging from 14.7 to 101.7 mm.

TEPN Pages 10 and 11

TEPN mandrels are intended for turning, grinding, shaving and inspection operations.

This type offers an expansibility of 0.5 to 1 mm depending on the diameter of the expanding sleeve, and can clamp workpieces with diameters ranging from an extremely small 5.5 mm to 79.7 mm. The knurled ring of the slotted expanding sleeve is fitted with a workstop used for positioning in the axial direction.


Tighten the expanding sleeve with the knurled ring to clamp the workpiece.Expansion occurs as the expanding sleeve slides over the tapered arbor. The workpiece is f i rmly c lamped as a result of this expansion of the expanding sleeve.Due to the movement of the expanding sleeve over the tapered arbor, the workpiece is pressed against the workstop.

Pages 10 and 11

On tightening the nut that is coupled w i th the expanding s leeve, the ex p a n d i n g s l e eve m ove s ove r the tapered arbor, c lamping the workpiece.

Pages 12 and 13

Arbor

Expanding Sleeve

Nut

Arbor

Knurled RingWorkstop

Expanding Sleeve

nExpanding mandrels for mounting between centres



8 tobler

Stan

dard

Exp

and

ing

Man

drels

TEP MandrelsRange of workpiece diameters: φ8 to 140 mm

Arbor Expanding Sleeve

Order Code Workpiece Diameter Range D1 D2 H1 I3 I4 kg Order Code D I I2 Expansibility

TEP-1 8.0 - 10.5 8 6.5 75 9 0.02 TEP80-1TEP90-1

89 40 3 1.5

TEP-2 10.0 - 12.5 10 8.5 110 9 0.051 TEP100-2TEP110-2

1011 45 3 1.5

TEP-3 12.0 - 15.0 12 10.0 125 9 0.085 TEP120-3TEP130-3

1213 60 4 2.0

TEP-4 14.0 - 17.0 14 12.0 140 16 0.13 TEP140-4TEP150-4

1415 70 4 2.0

TEP-5 16.0 - 20.0 16 14.0 150 16 0.18TEP160-5TEP170-5TEP180-5

161718

70 4 2.0

TEP-6 19.0 - 23.0 19 17.0 170 16 0.275TEP190-6TEP200-6TEP210-6

192021

80 4 2.0

TEP-7 22.0 - 26.0 21 18.5 175 20 0.35TEP220-7TEP230-7TEP240-7

222324

80 4 2.0

TEP-8 25.0 - 37.0 25 22.5 225 20 0.65

TEP250-8TEP260-8TEP280-8TEP300-8TEP320-8TEP340-8

252628303234

100 4 3.0

TEP-9 35.0 - 47.0 33 30.5 225 20 1.3


353638404244

100 5 3.0

TEP-10 45.0 - 59.0 44 45 42.0 300 29.9 2.97

TEP450-10TEP480-10TEP500-10TEP520-10TEP540-10

4548505254

125 5 5.0

TEP-11 55.0 - 70.0 52 53 50.0 300 29.9 4.685


5558606265

135 5 5.0

TEP-12 68.0 - 85.0 63 64 61.0 350 29.9 7.45


687072757880

150 5 5.0

TEP-13 80.0 - 105.0 66 76 62.0 350 36 10.5


80859095100

150 5 5.0

TEP-14 105.0 - 140.0 75 99 72.0 400 40 20.2

TEP1050-14TEP1100-14TEP1150-14TEP1200-14TEP1250-14TEP1300-14TEP1350-14

105110115120125130135

170 5 5.0

When placing an order, please specify the order code and quantity. Dimensions (mm)


φD

1

I3

I4

φD

2

H1

I I2

φD

nExpanding mandrels for mounting between centres [TEP]

8 tobler tobler 9

Stan

dard

Exp

and

ing

Man

drels

Order Code

Contents of the Set

Workpiece Diameter Range Arbor Expanding

Sleeve kg

TEP-B

25 - 2830 - 33 TEP-8 TEP250-8

TEP300-8

8.235 - 3840 - 43 TEP-9 TEP350-9

TEP400-9

45 - 5050 - 55 TEP-10 TEP450-10

TEP500-10

When placing an order, please specify the order code and quantity.

TEP MandrelsRange of workpiece diameters: φ135 to 235 mm

Order Code Workpiece Diameter Range D1 D2 H1 I3 I4 kg Order Code D I I2 Expansibility

TEP-15 135.0 - 185.0 80 124 76 442 42 19.6

TEP1350-15TEP1400-15TEP1450-15TEP1500-15TEP1550-15TEP1600-15TEP1650-15TEP1700-15TEP1750-15TEP1800-15

135140145150155160165170175180

180 50 5

TEP-16 185.0 - 235.0 80 145.5 76 442 42 28.5

TEP1850-16TEP1900-16TEP1950-16TEP2000-16TEP2050-16TEP2100-16TEP2150-16TEP2200-16TEP2250-16TEP2300-16

185190195200205210215220225230

200 40 5

When placing an order, please specify the order code and quantity. Ask for quotations for price and delivery of TEP-15 and TEP-16.

Dimensions (mm)


Order Code

Contents of the Set

Workpiece Diameter Range Arbor Expanding

Sleeve kg

TEP-A 12 - 25

TEP-3 TEP120-3

2.2

TEP-4 TEP140-4

TEP-5 TEP160-5TEP180-5

TEP-6 TEP200-6

TEP-7 TEP220-7TEP240-7

The most commonly used sizes of TEP mandrel have been brought together in a set of two types, which are offered in a robust toolbox to protect them.TEP mandrels are suited to inspection and grinding operations where the workpiece is mounted between centers.Guaranteed accuracy within stipulated expansion range: 0.01 mm (T.I.R.)The two types of TEP arbor / expanding sleeve set can accommodate workpiece diameters from 12 to 55 mm.

TEP-A: Diameters from 12 to 25 mmTEP-B: Diameters from 25 to 55 mm (1)

(1) In order to cover all of the workpiece diameters that can be handled with TEP mandrels, both of the sets TEP 280-8 and TEP 380-9 are required. Even exceptional applications can be covered by using either the TEP 250-8 or TEP 350-9 expanding sleeve at the maximum expansion.

TEP Mandrel Box Set

If you have a TEP mandrel you don’t have to spend time and effort preparing individual gripping tools.

It is taken for granted that every workstation where inspection and grinding are performed has a set of angle gauges and other measuring instruments, and the workstations should be equipped with sets of TEP mandrels too.Because of their versatility, reliability and high accuracy, TEP mandrels are indispensable for inspection and grinding operations in which the workpiece is held between centres.

nExpanding mandrels for mounting between centres [TEP]

10 tobler

Stan

dard

Exp

and

ing

Man

drels

TEPN MandrelsRange of workpiece diameters: φ5.5 to 25.0 mm

Arbor Expanding Sleeve1)

Order CodeWorkpiece Diameter

RangeD1 D2 H1 I3 I4 kg Order Code D D3 D4 H I Expansibility

Maximum Torque

N•m

TEPN-1 5.5 - 7.5 10 8.5 9.0 74.41 30 0.036

TN55-1TN60-1TN65-1TN70-1

5.56.06.57.0

10.8 19.5 17 12 0.5 1.5

TEPN-2 7.5 - 9.5 12 10.5 11.0 78.5 30 0.057

TN75-2TN80-2TN85-2TN90-2

7.58.08.59.0

13.8 23.0 19 16 0.5 5

TEPN-3 9.5 - 12.0 12 13.2 11.0 88.5 35 0.08

TN95-3TN100-3TN105-3TN110-3TN115-3

9.510.010.511.011.5

16.8 28.0 22 20 0.5 9

TEPN-4 12.0 - 15.0 14 16.0 12.5 96.5 35 0.13

TN120-4TN125-4TN130-4TN135-4TN140-4TN145-4

12.012.513.013.514.014.5

20.8 31.0 27 26 0.5 14

TEPN-5 14.5 - 19.5 18 21.0 16.5 101.5 35 0.22

TN145-5TN150-5TN155-5TN160-5TN165-5TN170-5TN175-5TN180-5TN185-5TN190-5

14.515.015.516.016.517.017.518.018.519.0

26.8 38.0 32 30 0.5 23

TEPN-6 19.5 - 25.0 20 26.0 18.0 112.5 40 0.394

TN195-6TN200-6TN205-6TN210-6TN215-6TN220-6TN225-6TN230-6TN235-6TN240-6TN245-6

19.520.020.521.021.522.022.523.023.524.024.5

31.8 47.0 41 36 0.5 55


1) The expanding sleeve is shipped with the knurled ring fitted.When placing an order, please specify the order code and quantity.

Dimensions (mm)

I4

φD

1

I3

φD

2

H1

TEPN-1

60°

φD

4

I

H

φD

φD

3

1.5

nExpanding mandrels for mounting between centres [TEPN]

10 tobler tobler 11

Stan

dard

Exp

and

ing

Man

drels

TEPN MandrelsRange of workpiece diameters: φ24.7 to 79.7 mm



RangeD1 D2 H1 I3 I4 kg Order Code D D3 D4 D5 I Expansibility

Maximum Torque

N•m

TEPN-7 24.7 - 29.7 25 31.0 22.5 134.0 45 0.613

TN247-7TN257-7TN267-7TN277-7TN287-7

24.725.726.727.728.7

36.8 54.0 69 42.5 1 80

TEPN-8 29.7 - 34.7 30 36.0 28.5 142.5 50 0.828

TN297-8TN307-8TN317-8TN327-8TN337-8

29.730.731.732.733.7

41.8 57.5 72 46.0 1 100

TEPN-9 34.7 - 39.7 40 41.0 37.0 154.0 55 1.283

TN347-9TN357-9TN367-9TN377-9TN387-9

34.735.736.737.738.7

47.8 66.0 79 52.5 1 120

TEPN-10 39.7 - 44.7 40 46.0 37.0 164.5 60 1.533

TN397-10TN407-10TN417-10TN427-10TN437-10

39.740.741.742.743.7

52.8 74.0 87 58.0 1 150

TEPN-11 44.7 - 54.7 45 55.5 42.0 195.0 67 2.298


44.745.746.747.748.749.750.751.752.753.7

61.8 83.0 96 76.0 1 200

TEPN-12 54.7 - 64.7 50 65.5 47.0 206.5 67 3.454


54.755.756.757.758.759.760.761.762.763.7

71.8 93.0 107 85.0 1 250

TEPN-13 64.7 - 79.7 50 83.0 47.0 219.5 67 4.857

TN647-13TN657-13TN667-13TN677-13TN687-13TN697-13TN707-13TN717-13TN727-13TN737-13TN747-13TN757-13TN767-13TN777-13TN787-13

64.765.766.767.768.769.770.771.772.773.774.775.776.777.778.7

90.8 108.0 130 96.0 1 270

When placing an order, please specify the order code and quantity. Ask for quotations for price and delivery of TEPN-12 and TEPN-13.

Dimensions (mm)


Dimensions (mm)

I4

φD

1

I3

φD

2

H1

φD

4

I

φD

5

φD

φD

3

1.5

nExpanding mandrels for mounting between centres [TEPN]

12 tobler

Stan

dard

Exp

and

ing

Man

drels

TMEP MandrelsRange of workpiece diameters: φ14.7 to 82.7 mm


Order Code

Workpiece Diameter

RangeD1 D2 D3 H1 I4 I5 I6 kg Order Code D H I I1 I22) I3 Expansibility

Maximum Torque

N•m

TMEP-1 14.7 - 19.7 13 23 15 11 6 8 95 0.094

TMEP147-1TMEP157-1TMEP167-1TMEP177-1TMEP187-1

14.715.716.717.718.7

11 35 38 12.0 43 1 15

TMEP-2 19.7 - 24.7 18 30 20 16 6 8 95 0.165


19.720.721.722.723.7

11 40 33 14.0 48 1 35

TMEP-3 24.7 - 29.7 20 36 24 18 6 18 125 0.350


24.725.726.727.728.7

17 46 46 14.5 55 1 75

TMEP-4 29.7 - 34.7 20 42 28 18 6 18 125 0.450


29.730.731.732.733.7

17 50 42 14.5 59 1 100

TMEP-5 34.7 - 39.7 30 48 32 26 9 22 160 0.850


34.735.736.737.738.7

22 60 57 14.5 72 1 120

TMEP-6 39.7 - 44.7 30 55 37 26 9 22 160 0.962


39.740.741.742.743.7

22 60 57 15.5 72 1 150

TMEP-7 44.7 - 54.7 35 62 42 31 9 24 200 1.650

TMEP447-7TMEP467-7TMEP487-7TMEP497-7TMEP507-7TMEP527-7

44.746.748.749.750.752.7

27 80 72 22.5 95 2 200

TMEP-8 54.7 - 64.7 35 72 52 31 9 24 200 2.150

TMEP547-8TMEP567-8TMEP587-8TMEP597-8TMEP607-8TMEP627-8

54.756.758.759.760.762.7

27 90 62 24.5 105 2 250

TMEP-9 64.7 - 82.7 55 82 62 50 9 24 270 4.805

TMEP647-9TMEP667-9TMEP687-9TMEP697-9TMEP707-9TMEP727-9TMEP747-9TMEP767-9TMEP787-9TMEP807-9

64.766.768.769.770.772.774.776.778.780.7

36 100 119 24.5 118 2 275


1) The expanding sleeve is shipped with the nut fitted.2) Do not clamp in the range I2.When placing an order, please specify the order code and quantity.

Dimensions (mm)

I5

φD

1

φD

2

φD

3

I4

I6

H1

φD

I1 I3

I2

I

H

nExpanding mandrels for mounting between centres [TMEP]

12 tobler tobler 13

Stan

dard

Exp

and

ing

Man

drels

When using a special expanding sleeve and a special workstop

Order Code

Workpiece Diameter

RangeD1 D2 D3 H1 I4 I5 I6 kg Order Code D H I I1 I22) I3 Expansibility Maximum

Torque N•m

TMEP-10 81.7-101.7 55 95 75 50 9 24 270 6.600

TMEP817-10TMEP837-10TMEP857-10TMEP877-10TMEP897-10TMEP917-10TMEP937-10TMEP957-10TMEP977-10TMEP997-10

81.783.785.787.789.791.793.795.797.799.7

36 122 97 26.5 140 2 320

When placing an order, please specify the order code and quantity. Ask for quotations for price and delivery of TMEP-10.

Dimensions (mm)

1) The expanding sleeve is shipped with the nut fitted.2) Do not clamp in the range I2.When placing an order, please specify the order code and quantity.

Dimensions (mm)

TMEP MandrelsRange of workpiece diameters: φ81.7 to 101.7 mm

When using the standard expanding sleeve and a special workstop

Example application Inspection / grinding

nExpanding mandrels for mounting between centres [TMEP]

14 tobler14 tobler

TMCMN Pages 16 and 17

TMCMN mandrels are designed for turning, milling, grinding and inspection operations. They offer expansibility from 0.5 to 1 mm depending on the expanding sleeve diameter, and can clamp workpieces with diameters from 5.5 to 79.7 mm. A workstop for positioning the workpiece in the axial direction is included.

They can be used for clamping workpieces with a blind hole or short workpieces.


Arbor

Expanding Sleeve

Knurled Ring

Workstop

The expanding sleeve can be used in common with TEPN.

Pages 16 and 17

TMCMN mandrels are designed for turning, milling, grinding and inspection operations. They offer expansibility from 0.5 to 1 mm depending on the expanding sleeve diameter, and can clamp workpieces with diameters from 5.5 to 79.7 mm. A workstop for positioning the workpiece in the axial direction is

They can be used for clamping workpieces with a blind hole or short workpieces.

MORSE TAPER TYPE EXPANDING MANDREL

Spindle Morse taper mounting type

TMCMN and TMCM feature an M12 (for MT3) or M16 (for MT4) threaded hole to accommodate a driving screw.Guaranteed accuracy within stipulated expansion range: 0.01 mm (T.I.R.)Expanding sleeve hardness: 48 HRCWith TMCM mandrels, the advance end is not supported by an arbor and for this reason they are not recommended for clamping short workpieces.

nMorse taper type expanding mandrel

14 tobler tobler 15

Stan

dard

Exp

and

ing

Man

drels

14 tobler

TMCM Page 18

TMCM mandrels are intended for turning, milling, grinding, gear hobbing, balancing, and inspection operations. The workpiece is positioned axially either by the workstop or a spacer. Expansibility is from 1 to 2 mm, depending on the diameter of the expanding sleeve. Workpieces with diameters from 14.7 to 82.7 mm can be clamped.

TMCMT Page 19

TMCMT mandrels are similar to TMCM but they clamp the workpiece by the operation of a driving screw on the back face of the mandrel, which is connected to the machine's drawbar.

This type offers an expansibility of 1 to 2 mm depending on the diameter of the expanding sleeve, and can clamp workpieces with diameters ranging from 14.7 to 82.7 mm.


The workpiece is inserted into the expanding sleeve from the front and the driving screw is tightened using a wrench. The workpiece is clamped when the expanding sleeve is pushed up onto the tapered arbor by tightening the driving screw.

Since the workpiece can be clamped a n d u n c l a m p e d a u t o m a t i c a l l y by operat ing this dr iv ing screw, workpiece changing time is reduced and operating convenience is greatly improved.

Page 19

TMCMT mandrels are similar to TMCM but they clamp the workpiece by the operation of a driving screw on the back face of the mandrel, which is

This type offers an expansibility of 1 to 2 mm depending on the diameter of the expanding sleeve, and can clamp workpieces with diameters

Page 18

TMCM mandrels are intended for turning, milling, grinding, gear hobbing, balancing, and inspection operations. The workpiece is positioned axially either by the workstop or a spacer. Expansibility is from 1 to 2 mm, depending on the diameter of the expanding sleeve. Workpieces with diameters from 14.7 to 82.7 mm can be clamped.

Arbor

Expanding Sleeve

Driving Screw

Arbor

Driving Screw

Expanding Sleeve

Nut Unclamping Stop

nMorse taper type expanding mandrel



16 tobler

Stan

dard

Exp

and

ing

Man

drels

TMCMN MandrelsRange of workpiece diameters: φ5.5 to 25.0 mm


Order Code Workpiece Diameter Range

Morse Taper No. I3 I4 D5 G Order Code D D2 D3 H I Expansibility Maximum

Torque N•m

TMCMN-1×35.5 - 7.5

3 126.0 34.08.5

M12 TN55-1TN60-1TN65-1TN70-1

5.56.06.57.0

10.8 19.5 17 12 0.5 1.5TMCMN-1×4 4 149.0 35.5 M16

TMCMN-2×37.5 - 9.5

3 134.5 38.510.5

M12 TN75-2TN80-2TN85-2TN90-2

7.58.08.59.0

13.8 23.0 19 16 0.5 5TMCMN-2×4 4 157.5 40.0 M16

TMCMN-3×3

9.5 - 12.0

3 139.5 39.5

13.2

M12 TN95-3TN100-3TN105-3TN110-3TN115-3

9.510.010.511.011.5

16.8 28.0 22 20 0.5 9

TMCMN-3×4 4 162.5 41.0 M16

TMCMN-4×3

12.0 - 15.0

3 147.5 41.5

16.0

M12TN120-4TN125-4TN130-4TN135-4TN140-4TN145-4

12.012.513.013.514.014.5

20.8 31.0 27 26 0.5 14

TMCMN-4×4 4 170.5 43.0 M16

TMCMN-5×3

14.5 - 19.5

3 152.5 42.5

21.0

M12


14.515.015.516.016.517.017.518.018.519.0

26.8 38.0 32 30 0.5 23

TMCMN-5×4 4 175.5 44.0 M16

TMCMN-6×3

19.5 - 25.0

3 158.5 42.5

26.0

M12

TN195-6TN200-6TN205-6TN210-6TN215-6TN220-6TN225-6TN230-6TN235-6TN240-6TN245-6

19.520.020.521.021.522.022.523.023.524.024.5

31.8 47.0 41 36 0.5 55

TMCMN-6×4 4 181.5 44.0 M16



Dimensions (mm)

Morse Taper

I

φD

1.5

I3

φD

5G

I4

φD

2

φD

3

H

nMorse taper type expanding mandrel [TMCMN]

16 tobler tobler 17

Stan

dard

Exp

and

ing

Man

drels

TMCMN MandrelsRange of workpiece diameters: φ24.7 to 79.7 mm



Morse Taper No. I3 I4 D5 G Order Code D D2 D3 D4 I Expansibility Maximum

Torque N•m

TMCMN-7×3

24.7 - 29.7

3 175.0 53.5

31.0

M12 TN247-7TN257-7TN267-7TN277-7TN287-7

24.725.726.727.728.7

36.8 54.0 69 42.5 1 80

TMCMN-7×4 4 198.0 55.0 M16

TMCMN-8×4 29.7 - 34.7 4 201.5 55.0 36.0 M16

TN297-8TN307-8TN317-8TN327-8TN337-8

29.730.731.732.733.7

41.8 57.5 72 46.0 1 100

TMCMN-9×4 34.7 - 39.7 4 208.0 55.0 41.0 M16

TN347-9TN357-9TN367-9TN377-9TN387-9

34.735.736.737.738.7

47.8 66.0 79 52.5 1 120

TMCMN-10×4 39.7 - 44.7 4 213.5 55.0 46.0 M16

TN397-10TN407-10TN417-10TN427-10TN437-10

39.740.741.742.743.7

52.8 74.0 87 58.0 1 150

TMCMN-11×4 44.7 - 54.7 4 237.0 60.0 55.5 M16


44.745.746.747.748.749.750.751.752.753.7

61.8 83.0 96 76.5 1 200

TMCMN-12×4 54.7 - 64.7 4 248.5 63.0 65.5 M16


54.755.756.757.758.759.760.761.762.763.7

71.8 93.0 107 85.0 1 250

TMCMN-13×4 64.7 - 79.7 4 261.5 65.0 83.0 M16

TN647-13TN657-13TN667-13TN677-13TN687-13TN697-13TN707-13TN717-13TN727-13TN737-13TN747-13TN757-13TN767-13TN777-13TN787-13

64.765.766.767.768.769.770.771.772.773.774.775.776.777.778.7

90.8 108.0 130 96.0 1 270

When placing an order, please specify the order code and quantity. Ask for quotations for price and delivery of TMCMN-11 to TMCMN-13.

Dimensions (mm)

1) The expanding sleeve is shipped with the ring fitted.When placing an order, please specify the order code and quantity.

Dimensions (mm)

Morse Taper

φD

5

I31.5

I4

G

I

φD

4

φD

3

φD

φD

2

nMorse taper type expanding mandrel [TMCMN]

18 tobler

Stan

dard

Exp

and

ing

Man

drels

TMCM MandrelsRange of workpiece diameters: φ14.7 to 82.7 mm



Range

Morse Taper No. D1 I4 I5 I6 I7 G kg Order Code D H I I1 I22) I3 Expansibility

Maximum Torque

N•m

TMCM-1×3

14.7 - 19.7

3 24.5 –

29.0

115.0 5.0 M12 0.232 TMCM147-1TMCM157-1TMCM167-1TMCM177-1TMCM187-1

14.715.716.717.718.7

8 35 6.5 12.5 44 1 15

TMCM-1×4 4 32.0 – 138.0 6.5 M16 0.485

TMCM-2×3

19.7 - 24.7

3 28.0 5

32.0


19.720.721.722.723.7

11 40 6.5 14.5 49 1 35

TMCM-2×4 4 32.0 – 141.0 6.5 M16 0.517

TMCM-3×3

24.7 - 29.7

3

33.0

8

38.0


24.725.726.727.728.7

13 46 6.5 14.5 56 1 75

TMCM-3×4 4 7 154.0 13.5 M16 0.576

TMCM-4×4 29.7 - 34.7 4 38.0 7 41.0 157.0 13.5 M16 0.646

TMCM297-4TMCM307-4TMCM317-4TMCM327-4TMCM337-4

29.730.731.732.733.7

17 50 6.5 15.5 62 1 100

TMCM-5×4 34.7 - 39.7 4 43.0 8 50.0 167.0 14.5 M16 0.757


34.735.736.737.738.7

17 60 6.5 16.5 72 1 120

TMCM-6×4 39.7 - 44.7 4 48.0 9 50.0 168.0 15.5 M16 0.840


39.740.741.742.743.7

19 60 6.5 16.5 74 1 150

TMCM-7×4 44.7 - 54.7 4 58.0 9 67.0 185.0 15.5 M16 1.118

TMCM447-7TMCM467-7TMCM487-7TMCM497-7TMCM507-7TMCM527-7

44.746.748.749.750.752.7

22 80 12.0 25.0 95 2 200

TMCM-8×4 54.7 - 64.7 4 68.0 12 75.0 196.0 18.5 M16 1.792

TMCM547-8TMCM567-8TMCM587-8TMCM597-8TMCM607-8TMCM627-8

54.756.758.759.760.762.7

27 90 12.0 27.0 98 2 275

TMCM-9×4 64.7 - 82.7 4 86.0 14 85.5 208.5 20.5 M16 2.260

TMCM647-9TMCM667-9TMCM687-9TMCM697-9TMCM707-9TMCM727-9TMCM747-9TMCM767-9TMCM787-9TMCM807-9

64.766.768.769.770.772.774.776.778.780.7

32 100 12.0 26.5 120 2 320

When placing an order, please specify the order code and quantity. Ask for quotations for price and delivery of TMCM-8 and TMCM-9.

Dimensions (mm)

1) The expanding sleeve is shipped with the driving screw fitted.2) Do not clamp in the range I2.When placing an order, please specify the order code and quantity.

Dimensions (mm)

Morse Taper

φD

1

I7

G

I6

I4 I5

φD

I2

I

I1 I3

H

nMorse taper type expanding mandrel [TMCM]

18 tobler tobler 19

Stan

dard

Exp

and

ing

Man

drels

TMCMT MandrelsRange of workpiece diameters: φ14.7 to 82.7 mm



Range

Morse Taper No.

D1 I4 I5 I6 I7 kg Order Code D I I1 I22) I3 G Expansibility

Maximum Force on Driving

Screw (daN)

Maximum Torque

N•m

TMCMT-1×4 14.7 - 19.7 4 32 29.0 138.0 6.5 0.530

TMCMT147-1×4TMCMT157-1×4TMCMT167-1×4TMCMT177-1×4TMCMT187-1×4

14.715.716.717.718.7

35 6.5 12.5 26 M6 1 700 15

TMCMT-2×4 19.7 - 24.7 4 32 32.0 141.0 6.5 0.530


19.720.721.722.723.7

40 6.5 14.5 28 M8 1 900 35

TMCMT-3×4 24.7 - 29.7 4 33 7 38.0 154.0 13.5 0.537


24.725.726.727.728.7

46 6.5 14.5 31 M10 1 1,200 75

TMCMT-4×4 29.7 - 34.7 4 38 7 41.0 157.0 13.5 0.636


29.730.731.732.733.7

50 6.5 15.5 31 M10 1 1,200 100

TMCMT-5×4 34.7 - 39.7 4 43 8 50.0 167.0 14.5 0.710


34.735.736.737.738.7

60 6.5 16.5 36 M12 1 1,500 120

TMCMT-6×4 39.7 - 44.7 4 48 9 50.0 168.0 15.5 0.755


39.740.741.742.743.7

60 6.5 16.5 36 M12 1 1,500 150

TMCMT-7×4 44.7 - 54.7 4 58 9 67.0 185.0 15.5 1.015

TMCMT447-7×4TMCMT467-7×4TMCMT487-7×4TMCMT497-7×4TMCMT507-7×4TMCMT527-7×4

44.746.748.749.750.752.7

80 12.0 25.0 36 M12 2 2,000 200

TMCMT-8×4 54.7 - 64.7 4 68 12 75.0 196.0 18.5 1.488

TMCMT547-8×4TMCMT567-8×4TMCMT587-8×4TMCMT597-8×4TMCMT607-8×4TMCMT627-8×4

54.756.758.759.760.762.7

90 12.0 27.0 36 M14 2 2,000 250

TMCMT-9×4 64.7 - 82.7 4 86 14 85.5 208.5 20.5 2.210

TMCMT647-9×4TMCMT667-9×4TMCMT687-9×4TMCMT697-9×4TMCMT707-9×4TMCMT727-9×4TMCMT747-9×4TMCMT767-9×4TMCMT787-9×4TMCMT807-9×4

64.766.768.769.770.772.774.776.778.780.7

100 12.0 26.5 36 M14 2 2,500 275

When placing an order, please specify the order code and quantity. Ask for quotations for price and delivery of TMCMT-8 and TMCMT-9.

Dimensions (mm)

1) The expanding sleeve is shipped with the driving screw fitted.2) Do not clamp in the range I2.When placing an order, please specify the order code and quantity.

Dimensions (mm)

Morse Taper

φD

1

I4

I6

I5

I7

I3

G φD

I1 I

I2

nMorse taper type expanding mandrel [TMCMT]

1 daN = 10 N

20 tobler20 tobler

TMDI Pages 24 to 28

TMDI mandrels are intended for turning, milling, grinding, gear cutting and inspection operations.

This type offers an expansibility of 0.5 to 1.5 mm depending on the diameter of the expanding sleeve. Since the replaceable types of expanding sleeve, driving screw and stopper plate are adopted, a wide range of workpieces with diameters from 16 to 131 mm can be clamped with only three types of arbor.

The expanding sleeve is fixed in place with the stop pin in the rotational direction and with the mandrel body and stopper plate in the axial direction. Due to the use of the stopper plate and the fact that the positional relationship between the expanding sleeve and the mandrel body does not change at clamping, the position of the workpiece does not change when clamping.

Since the driving screw makes contact with the whole length of the expanding sleeve, the front end of the expanding sleeve can be used for clamping, enabling clamping of short workpieces and end face machining.

There are two alternatives for clamping:

a) Clamping using the drawbar connector on the back of the mandrel that is connected to the drawbar of the machine

b) Clamping using the driving screw (screwed to the plate for manual clamping) on the front of the mandrel

TMTP Pages 22 and

23

TMTP mandrels are intended for turning, shaving, milling and gear cutting operations. Expansibility is between 1 and 2 mm, depending on the diameter of the expanding sleeve.

Workpieces with diameters from 14.7 to 131.7 mm can be clamped, and there are two alternatives for clamping:

a) Clamping using the drawbar connector on the back of the mandrel that is connected to the drawbar of the machine

b) Clamping using the driving screw (screwed to the plate for manual clamping) on the front of the mandrel

MANDRELS FOR FLANGE MOUNTING

These mandrels mounted on the machine spindle nose with their flanges are especially rigid, and are recommended when high torque has to be transferred from the machine to the workpiece, and when high cutting forces are involved.With TMTP mandrels, the advance end is not supported by an arbor and for this reason they are not recommended for clamping short workpieces.

Maximum rotation speed when the workpiece is not clamped: 50 min-1

Clamping takes place as follows:The workpiece is clamped by means of a drawbar connector or a hexagonal wrench on the back of the mandrel.

Clamping takes place as follows:The workpiece is clamped when the expanding sleeve slides up onto the tapered arbor.

Arbor

Expanding Sleeve

Driving Screw

Screw

Plate Mounting Screws Plate for Manual Clamping

Drawbar Connector

Plate Mounting

ScrewsExpanding SleeveStop Pin

Driving Screw

Wedge

Stopper PlateStopper PlateArbor

nMandrels for flange mounting

Pages 22 and

Pages 24 to 28

This type offers an expansibility of 0.5 to 1.5 mm depending on the diameter of the expanding sleeve. Since the replaceable types of expanding sleeve, driving screw and stopper plate are adopted, a wide

Drawbar Connector

20 tobler tobler 21

Stan

dard

Exp

and

ing

Man

drels

20 tobler

TMASIT Pages 31 and 32

This is a suitable model for medium- and large-scale standardized lot production, for example automobile parts. This model can offer an expansibility of 0.8 or 1.0 mm depending on the diameter of the expanding sleeve and can clamp workpieces with diameters from 18 to 131 mm with only 5 varieties of arbor. Since the expanding sleeves can be attached and removed from the front easily, setup changes between workpieces with different diameters can be done smoothly if the same arbor type is used. Also, if various machines such as turning, grinding, gear machining, finishing, and inspection machines use the same arbor type and share expanding sleeves, the number of components can be reduced. That means making the most of this model can minimize equipment investment. This is a high-performance and high-profit model pursuing ease of use, reliability, durability and low cost.

TMTPN Pages 29 and 30

Expansibility is 0.5 to 1 mm depending on the diameter of the expanding sleeve, and workpieces with diameters from 5.5 to 79.7 mm can be clamped.

TMTPN mandrels are intended for finish turning and inspection operations. They can also be used for workpieces with a blind hole or short workpieces. With TMTPN-1 to TMTPN-4 mandrels, the unclamping operation is performed manually or by using the drawbar while clamping is done by spring force. With TMTPN-5 to TMTPN-13 mandrels, workpieces are automatically clamped using the drawbar.

Workpieces are posit ioned in the axial direction using the workstop set on the arbor.

Maximum rotation speed when the workpiece is not clamped: 50 min-1

Arbor Driving Ring

Clamping by DrawbarClamping by Drawbar

Clamping by Spring

Connecting PinConnecting Pin

Expanding Sleeve

Clamping by Spring

Three threaded holes are machined in the end face of the mandrel, making it possible to mount a variety of workstops for axial positioning.Guaranteed accuracy within stipulated expansion range: 0.01 mm (T.I.R.)Expanding sleeve hardness: TMTP, TMDI, TMTPN: 48 HRC TMASIT: 58 HRC

Note: These models are designed for spindle rotation in the counterclockwise direction.Mandrels with a left-hand thread can be made to order.

Pages 29 and 30

Connecting PinConnecting Pin

Pages 31 and

ArborExpanding Sleeve

Drawbar Connector

Driving Screw

Compensating Washer O-ringO-ring

Positioning Pin

nMandrels for flange mounting

Locking RingLocking Ring

Locking RingWorkstop

Driving Pin

22 tobler

Stan

dard

Exp

and

ing

Man

drels

TMTP MandrelsRange of workpiece diameters: φ14.7 to 82.7 mm

Arbor

Order Code

Workpiece Diameter

RangeD1 D2 D3 D4 D5 d I3 I4 I5 D6 M1 M2 kg Order

Code D I I1 I22) Expansibility Stroke (mm)


Screw (daN)

Maximum Torque

N•m

TMTP-1 14.7 - 19.7 102 75.0 14.0 40 57 51.5 9.5 78.5 40 10.5 M16 M6 1.645

TMTP147-1TMTP157-1TMTP167-1TMTP177-1TMTP187-1

14.715.716.717.718.7

35 16 12.5 1 6 700 15

TMTP-2 19.7 - 24.7 102 75.0 19.0 40 57 51.5 9.5 81.5 40 10.5 M16 M6 1.700


19.720.721.722.723.7

40 16 14.5 1 6 900 35

TMTP-3 24.7 - 29.7 102 75.0 23.0 40 57 51.5 9.5 87.5 40 10.5 M16 M6 1.707


24.725.726.727.728.7

46 16 14.5 1 6 1,200 75

TMTP-4 29.7 - 34.7 112 85.0 27.0 54 67 61.0 9.5 90.5 40 10.5 M16 M6 2.121


29.730.731.732.733.7

50 16 15.5 1 6 1,200 100

TMTP-5 34.7 - 39.7 112 85.0 31.5 54 67 61.0 9.5 99.5 40 10.5 M16 M6 2.205


34.735.736.737.738.7

60 16 16.5 1 6 1,500 120

TMTP-6 39.7 - 44.7 112 85.0 36.0 54 67 61.0 9.5 99.5 40 10.5 M16 M6 2.280


39.740.741.742.743.7

60 16 16.5 1 6 2,000 150

TMTP-7 44.7 - 54.7 135 104.8 42.0 78 88 80.0 4.5 117.0 40 10.5 M16 M6 3.725

TMTP447-7TMTP467-7TMTP487-7TMTP497-7TMTP507-7TMTP527-7

44.746.748.749.750.752.7

80 22 25.0 2 12 2,000 200

TMTP-8 54.7 - 64.7 135 104.8 51.0 78 88 80.0 4.5 125.0 40 10.5 M16 M6 4.085

TMTP547-8TMTP567-8TMTP587-8TMTP597-8TMTP607-8TMTP627-8

54.756.758.759.760.762.7

90 22 27.0 2 12 2,000 250

TMTP-9 64.7 - 82.7 135 104.8 60.0 78 88 80.0 4.5 135.5 40 10.5 M16 M6 4.740

TMTP647-9TMTP667-9TMTP687-9TMTP697-9TMTP707-9TMTP727-9TMTP747-9TMTP767-9TMTP787-9TMTP807-9

64.766.768.769.770.772.774.776.778.780.7

100 22 26.5 2 12 2,500 275

When placing an order, please specify the order code and quantity.Note: For details on the flange adaptor for mounting to the spindle nose, see page 33.

Dimensions (mm)

1) The expanding sleeve is shipped with the driving screw fitted.

2) Do not clamp in the range I2.

Dimensions (mm)


Expanding Sleeve1)

Stroke (mm)

φD

1

I5

φD

2

M1

φD

3

φD

4

φD

5

I3

I4

M23 × 120°

3 × 120°

30~31

dH

6

φD

I2

II1

φD

6

nMandrels for flange mounting [TMTP]

1 daN = 10 N

22 tobler tobler 23

Stan

dard

Exp

and

ing

Man

drels

TMTP MandrelsRange of workpiece diameters: φ81.7 to 131.7 mm

Order Code

Workpiece Diameter

RangeD1 D2 D3 D4 D5 d I3 I4 I5 D6 M1 M2 kg Order Code D I I1 I22) Expansibility Stroke

(mm)

Maximum Force on Driving Screw

(daN)

Maximum Torque

N•m

TMTP-10 81.7 - 101.7 135 104.8 73 100 – 80 4.5 155.5 40 10.5 M16 M6 6.297

TMTP817-10TMTP837-10TMTP857-10TMTP877-10TMTP897-10TMTP917-10TMTP937-10TMTP957-10TMTP977-10TMTP997-10

81.783.785.787.789.791.793.795.797.799.7

122 22 28.5 2 12 2,500 320

TMTP-11 101.7 - 131.7 165 133.4 88 130 – 100 – 178.0 45 13.0 M20 M8 10.000

TMTP1017-11TMTP1037-11TMTP1057-11TMTP1077-11TMTP1097-11TMTP1117-11TMTP1137-11TMTP1157-11TMTP1177-11TMTP1197-11TMTP1217-11TMTP1237-11TMTP1257-11TMTP1277-11TMTP1297-11

101.7103.7105.7107.7109.7111.7113.7115.7117.7119.7121.7123.7125.7127.7129.7

140 25 32.0 2 12 3,000 500

When placing an order, please specify the order code and quantity.Note: For details on the flange adaptor for mounting to the spindle nose, see

page 33. Equipment that fits directly to A1-5” can be made to order. Equipment that fits directly to A1-6” can be made to order.

Dimensions (mm)

1) The expanding sleeve is shipped with the driving screw fitted.

2) Do not clamp in the range I2.

Dimensions (mm)


Standard 1 2 3 4 5

Notes

ArborTMTP

Type Plate for Manual Clamping

Plate Mounting Screws

Drawbar Connector Screw Driving

Screw

TMTP-1TMTP-2TMTP-3TMTP-4TMTP-5TMTP-6TMTP-7TMTP-8TMTP-9TMTP-10TMTP-11

TMTPS-1TMTPS-2TMTPS-3TMTPS-4TMTPS-5TMTPS-6TMTPS-7TMTPS-8TMTPS-9TMTPS-10TMTPS-11

CHC6×15CHC6×15CHC6×15CHC6×15CHC6×15CHC6×15CHC6×15CHC6×15CHC6×15CHC6×15CHC8×20

TMTPD-1TMTPD-2TMTPD-3TMTPD-4TMTPD-5TMTPD-6TMTPD-7TMTPD-8TMTPD-9TMTPD-10TMTPD-11

TMTP-123456TMTP-123456TMTP-123456TMTP-123456TMTP-123456TMTP-123456TMTP-78910TMTP-78910TMTP-78910TMTP-78910

TMTP8×20-11

TMTPV-1TMTPV-2TMTPV-3TMTPV-4TMTPV-5TMTPV-6TMTPV-7TMTPV-8TMTPV-9TMTPV-10TMTPV-11

On maintenance: Clean and lubricate the mandrel after use. Do not store a mandrel in the clamped state.


Spare parts

5

3 4

2

1

nMandrels for flange mounting [TMTP]

1 daN = 10 N

24 tobler

Stan

dard

Exp

and

ing

Man

drels

TMDI-0 MandrelsRange of workpiece diameters: φ16 to 25.5 mm

Arbor Piston Expanding Sleeve Stopper Plate


Range


(daN)Order Code D2 kg Order Code D D1 I Expansibility Order Code D3

TMDI-0

16.0 - 17.5

800 TMDI-01 13

1.148

TMDI160-011TMDI165-011TMDI170-011

16.016.517.0

21.5

33 0.5

TMDI-011 18.0

17.5 - 19.0TMDI175-012TMDI180-012TMDI185-012

17.518.018.5

23.0 TMDI-012 19.5

19.0 - 20.5TMDI190-013TMDI195-013TMDI200-013

19.019.520.0

24.5 TMDI-013 21.0

20.5 - 22.0

800 TMDI-02 16

TMDI205-021TMDI210-021TMDI215-021

20.521.021.5

26.0

33 0.5

TMDI-021 22.5

22.0 - 23.5TMDI220-022TMDI225-022TMDI230-022

22.022.523.0

27.5 TMDI-022 24.0

23.5 - 25.5

TMDI235-023TMDI240-023TMDI245-023TMDI250-023

23.524.024.525.0

29.5 TMDI-023 26.0

When placing an order, please specify the order code and quantity.Note: For details on the flange adaptor for mounting to the spindle

nose, see page 33.

Dimensions (mm)



Stroke: 2 mm

25 31 25

94

18

3 × 120°

6

φ35

h6

M14

M6

φ60

25

4φ43

.5

φ6.

5

φ10

.5

M6

3 × 120°

3 × 120°

φ60

8

4

I

φD

1

φD

M8

φD

2

φ80

φD

3

nMandrels for flange mounting [TMDI-0]

1 daN = 10 N

24 tobler tobler 25

Stan

dard

Exp

and

ing

Man

drels




Range



TMDI-1

20.0 - 21.5

1,200 TMDI-11 16

1.148

TMDI200-111TMDI205-111TMDI210-111

20.020.521.0

25.5

40 0.5

TMDI-111 22.0

21.5 - 24.0

TMDI215-112TMDI220-112TMDI225-112TMDI230-112TMDI235-112

21.522.022.523.023.5

28.0 TMDI-112 24.5

24.0 - 25.5TMDI240-113TMDI245-113TMDI250-113

24.024.525.0

30.0 TMDI-113 26.0

25.5 - 28.5

1,200 TMDI-12 20

TMDI255-121TMDI260-121TMDI265-121TMDI270-121TMDI275-121TMDI280-121

25.526.026.527.027.528.0

33.0

40 0.5

TMDI-121 29.0

28.5 - 32.0

TMDI285-122TMDI290-122TMDI295-122TMDI300-122TMDI305-122TMDI310-122TMDI315-122

28.529.029.530.030.531.031.5

36.5 TMDI-122 32.5

32.0 - 35.5

TMDI320-123TMDI325-123TMDI330-123TMDI335-123TMDI340-123TMDI345-123TMDI350-123

32.032.533.033.534.034.535.0

40.0 TMDI-123 36.0

35.5 - 38.0

1,200 TMDI-13 30


35.536.036.537.037.5

42.5

40 0.5

TMDI-131 38.5

38.0 - 40.5


38.038.539.039.540.0

45.0 TMDI-132 41.0


nose, see page 33.

Dimensions (mm)



Stroke: 2 mm

25 31 25

97

18

3 × 120°

6

φ35

h6

M14

M6

φ60

5φ47

.5

φ6.

5

φ10

.5

M6

3 × 120°

3 × 120°

φ60

10

5

I

φD

1

φD

φD

2

φ80

30

φD

3

M10


1 daN = 10 N

26 tobler

Stan

dard

Exp

and

ing

Man

drels




Maximum Force on Driving Screw (daN)

Order Code D2 kg Order Code D D1 I Expansibility Order Code D3

TMDI-2

35.0 - 37.5

2,000 TMDI-21 30

1.776


35.035.536.036.537.0

41

55 0.5

TMDI-211 38

37.5 - 40.5


37.538.038.539.039.540.0

44 TMDI-212 41

40.5 - 43.5

2,000 TMDI-22 35


40.541.041.542.042.543.0

48

55 0.5

TMDI-221 44

43.5 - 46.5


43.544.044.545.045.546.0

51 TMDI-222 47

46.5 - 50.5

TMDI465-223TMDI470-223TMDI475-223TMDI480-223TMDI485-223TMDI490-223TMDI495-223TMDI500-223

46.547.047.548.048.549.049.550.0

54 TMDI-223 51

50.5 - 53.5

2,000 TMDI-23 45


50.551.051.552.052.553.0

58

55 0.5

TMDI-231 54

53.5 - 56.5


53.554.054.555.055.556.0

61 TMDI-232 57

56.5 - 60.5

TMDI565-233TMDI570-233TMDI575-233TMDI580-233TMDI585-233TMDI590-233TMDI595-233TMDI600-233

56.557.057.558.058.559.059.560.0

64 TMDI-233 61




Stroke: 2 mm

25 31 25

100

14

3 × 120°

6

φ35

h6

M14

M10

φ85

φ10

5

φ6.

5

45

φ67

5

10

3 × 120°

M6

φD

3

3 × 120°

φ80

φ10

.5

φD

1

φD

5

I

M14

φD

2


1 daN = 10 N

26 tobler tobler 27

Stan

dard

Exp

and

ing

Man

drels

TMDI-3 MandrelsRange of workpiece diameters: φ55 to 81 mm



Range



TMDI-3

55 - 58

2,000

TMDI-31 48

2.400

TMDI550-311TMDI560-311TMDI570-311

555657

62

70 1

TMDI-311 59

58 - 61TMDI580-312TMDI590-312TMDI600-312

585960

65 TMDI-312 62

61 - 64

TMDI-32 55

TMDI610-321TMDI620-321TMDI630-321

616263

68 TMDI-321 65

64 - 67TMDI640-322TMDI650-322TMDI660-322

646566

71 TMDI-322 68

67 - 71TMDI670-323TMDI680-323TMDI690-323TMDI700-323

67686970

75 TMDI-323 72

71 - 74

TMDI-33 65

TMDI710-331TMDI720-331TMDI730-331

717273

78 TMDI-331 75

74 - 77TMDI740-332TMDI750-332TMDI760-332

747576

81 TMDI-332 78

77 - 81TMDI770-333TMDI780-333TMDI790-333TMDI800-333

77787980

85 TMDI-333 82


nose, see page 33.

Dimensions (mm)



Spare parts

Standard 1 1 1 2 3 4 5 6

NotesArborTMDI

Drawbar Connector

Drawbar Connector

Drawbar Connector

Driving Screw Stopper Plate Plate Mounting

Screws Wedge Stop Pin

TMDI-0TMDI-1TMDI-2TMDI-3TMDI-4

TMDID-0TMDID-1

–––

––

TMDID-2––

–––

TMDID-3TMDID-4



CHC5×15CHC6×20CHC6×20CHC6×20CHC8×25

CL00025CL00025CL00025CL00111

TMDICL-4

BG00098BG00098BG00098BG00098BG00174

On maintenance: Clean and lubricate the mandrel after use. Do not store a mandrel in the clamped state.


TMDI

2

5

1

3 4

6

φ12

0

φ35

h6

6

14

25 2531

105

3 × 120°

φ85

Stroke: 4 mm

60

φ90

5

φ10

.5

φ6.

5

φD

3

M6

103 × 120°

3 × 120°

φ10

5

5

M14

φD

2

φD

φD

1

I

nMandrels for flange mounting [TMDI-3]M

14

φ11

1 daN = 10 N

28 tobler

Stan

dard

Exp

and

ing

Man

drels

TMDI-4 MandrelsRange of workpiece diameters: φ80 to 131 mm



Range



TMDI-4

80 - 86

2,500

TMDI-41 68

7.45


80.081.583.084.5

96

100 1.5

TMDI-411 87

86 - 92


86.087.589.090.5

102 TMDI-412 93

92 - 98

TMDI-42 80


92.093.595.096.5

108 TMDI-421 99

98 - 104


98.099.5101.0102.5

114 TMDI-422 105

104 - 110

TMDI-43 92


104.0105.5107.0108.5

120 TMDI-431 111

110 - 116


110.0111.5113.0114.5

126 TMDI-432 117

116 - 122

TMDI-44 102


116.0117.5119.0120.5

132 TMDI-441 123

122 - 131


122.0123.5125.0126.5128.0129.5

140 TMDI-442 132


nose, see page 33.

Dimensions (mm)



Stroke: 6 mm


158

38

3 × 120°

6

φ51.5 h6 φ133.4

φ13

φD2

M18

φD1

φ144

3 × 120°

φD

I85

7

φD3

φ162

φ14

M18

φ180

46.5 35

22

φ20

15 3 × 120°

M8

φ162φ8.5

7

1 daN = 10 N

28 tobler tobler 29

Stan

dard

Exp

and

ing

Man

drels

TMTPN MandrelsRange of workpiece diameters: φ5.5 to 39.7 mm

Order Code D1 D2 D3 D4 I1

Minimum / Maximum, I2


Screw F (daN)

Order Code

Workpiece Diameter Range, D

I Expansibility

TMTPN-1 10.8 8.5 24 20 57 40.0 / 45.5

144 (Maximum

Force: 70 daN)

TNS55-1TNS60-1TNS65-1TNS70-1

5.5 - 7.5 12.0 0.5

TMTPN-2 13.8 10.5 26 23 61 40.0 / 45.5

235 (Maximum

Force: 130 daN)

TNS75-2TNS80-2TNS85-2TNS90-2

7.5 - 9.5 16.0 0.5

TMTPN-3 16.8 13.2 28 23 61 40.0 / 45.5

235 (Maximum

Force: 130 daN)

TNS95-3TNS100-3TNS105-3TNS110-3TNS115-3

9.5 - 12.0 20.0 0.5

TMTPN-4 20.8 16.0 32 25 63 47.0 / 52.5

298 (Maximum

Force: 150 daN)

TNS120-4TNS125-4TNS130-4TNS135-4TNS140-4TNS145-4

12.0 - 15.0 26.0 0.5

TMTPN-5 26.8 21.0 42 73 38.0 / 43.5 400

TNS145-5TNS150-5TNS155-5TNS160-5TNS165-5TNS170-5TNS175-5TNS180-5TNS185-5TNS190-5

14.5 - 19.5 30.0 0.5

TMTPN-6 31.8 26.0 56 85 38.0 / 43.5 500

TNS195-6TNS200-6TNS205-6TNS210-6TNS215-6TNS220-6TNS225-6TNS230-6TNS235-6TNS240-6TNS245-6

19.5 - 25.0 36.0 0.5

TMTPN-7 36.8 31.0 56 89 38.0 / 44.0 800


24.7 - 29.7 42.5 1.0

TMTPN-8 41.8 36.0 66 89 38.0 / 44.0 800


29.7 - 34.7 46.0 1.0

TMTPN-9 47.8 41.0 66 91 38.0 / 44.0 800


34.7 - 39.7 52.5 1.0


Dimensions (mm)

TMTPN-1 to 4: Clamping by springTMTPN-5 to 9: Clamping by drawbar

Dimensions (mm)

Note: For details on the flange adaptor for mounting to the spindle nose, see page 33.

Note: For all of the TMTPN mandrels there are both old and new types for TMTPN-1 through TMTPN-5.

Other types can be made to order.


TMTPN-1 / TMTPN-2TMTPN-3 / TMTPN-4

TMTPN-5

TMTPN-6 / TMTPN-7TMTPN-8 / TMTPN-9

nMandrels for flange mounting [TMTPN]

φ6.5

F

φ35 h6

φD4

I2 I1

I1.5

6 15

φ80

φD2

φ6.5

F

φ35 h6

M14

I2 I1

I

6 15

φ80

φD

26

φD2

F

φ35 h6

M14

I2 I1

I1.5

6 20

φ110

φD

26

φD1

φD3

φ10.5 φ60 (3 × 120°)

φD1

φD3φ10.5

1.5

φ11φ17

φ60 (3 × 120°)

φ85 (3 × 120°)

1 daN = 10 N

30 tobler

Stan

dard

Exp

and

ing

Man

drels

TMTPN MandrelsRange of workpiece diameters: φ39.7 to 79.7 mm

Order Code D1 D2 D3 D4 I1

Minimum / Maximum, I2


Screw (daN)

Order Code

Workpiece Diameter Range, D

I Expansibility

TMTPN-10 52.8 46.0 84 120 30 / 36 1,200


39.7 - 44.7 58.0 1

TMTPN-11 61.8 55.5 84 120 30 / 36 1,200


44.7 - 54.7 76.5 1

TMTPN-12 71.8 65.5 112 126 30 / 36 1,200


54.7 - 64.7 85.0 1

TMTPN-13 90.8 83.0 112 126 30 / 36 1,200

TNS647-13TNS657-13TNS667-13TNS677-13TNS687-13TNS697-13TNS707-13TNS717-13TNS727-13TNS737-13TNS747-13TNS757-13TNS767-13TNS777-13TNS787-13

64.7 - 79.7 96.0 1


Dimensions (mm)

TMPN-10 to 13: Clamping by drawbar

Dimensions (mm)

nEquipment that fits directly to A1-6” can be made to order.

Arbor

Standard 0 1 2 3 4 5 6 7 8

ArborTMDI

Standard Mandrel

Drawbar Connector

Drawbar with Spring Spring Connecting

PinLocking

RingDriving

RingLocking

RingDriving

Ring Workstop

TMTPN-13TMTPN-23TMTPN-33TMTPN-43

–






TMTPN-1ECTMTPN-2ECTMTPN-3ECTMTPN-4EC

TMTPN-1BFTMTPN-2BFTMTPN-3BFTMTPN-4BF

TNW-1TNW-2TNW-3TNW-4

TMTPN-53TMTPN-63TMTPN-73TMTPN-83TMTPN-93TMTPN-103TMTPN-113TMTPN-123TMTPN-133


– –




– –

TNW-5TNW-6TNW-7TNW-8TNW-9TNW-10TNW-11TNW-12TNW-13

Spare parts

Expanding Sleeve

nMandrels for flange mounting [TMTPN]

(3 × 120°)

φD2

φ133.4

φ100H6

M20

I2 I1

I1.5

35

φ165

φD

40

φD1φD3

φ13 φ20

1 daN = 10 N

1 2

3

4

45

7 6

8

TMTPN 1 - 4 TMTPN 5 - 13

0 8

34

5

30 tobler tobler 31

Stan

dard

Exp

and

ing

Man

drels

TMASIT MandrelsRange of workpiece diameters: φ18 to 80 mm

Arbor / Drawbar Connector Driving Screw2) Unit Set1)

Order Code D1 D2 I3 F-MAXI Order Code D3 Order CodeWorkpiece Diameter Range, D

I I1 I2 Expansibility

TMIT-0 26g6 54 59.0 350 daN TMITxxx-01 18 - 24 TMITxxx-0 18 - 24 30.0 64.0 5 0.8

TMIT-1 39g6 54 67.5 1,200 daN TMITxxx-11 24 - 32 TMITxxx-1 24 - 32 36.5 73.5 6 0.8

TMIT-2 39g6 54 67.5 1,500 daN TMITxxx-21 30 - 45 TMITxxx-2 30 - 45 36.5 73.5 6 0.8

2) High-accuracy grinding of screw heads can be done if ordered.


Dimensions (mm) 1) High-accuracy grinding of unit sets can be done if ordered.Note: Calculation of diameter D

xxx = (maximum permissible value D - 0.1 mm) × 10Ex.) When the workpiece has a diameter of 25 ±0.1 mm xxx = (24.9 - 0.1) × 10 = 248

Order Code: TMIT248-1When placing an order, please specify the order code and quantity.Maximum rotation speed when the workpiece is not clamped: 50 min-1

Dimensions (mm)

Arbor

Arbor / Drawbar Connector Driving Screw2) Unit Set1)

Order Code F-MAXI Order Code D3 Order CodeWorkpiece Diameter Range, D

Expansibility

TMIT-3 2,500 daN TMITxxx-31 45 - 80 TMITxxx-3 45 - 80 0.8

2) High-accuracy grinding of screw heads can be done if ordered.When placing an order, please specify the order code and quantity.Note: For details on the flange adaptor for mounting to the spindle

nose, see page 33.Maximum rotation speed when the workpiece is not clamped: 50 min-1

Dimensions (mm)

1) High-accuracy grinding of unit sets can be done if ordered.When placing an order, please specify the order code and quantity.

Dimensions (mm)

F-Maxi

F-Maxi

Stroke: 3 mm

25

3 × 120°

φ50

φ39

M14

M6

φ65

h5

3 × 120°

15

35 I3

M5

φD

1

φD

3

φD

2

I1

I2I

φD

φ32

8.5

Stroke: 3 mm

3 × 120°

φ10

0

φ65

h5

M14

φ11

8

3 × 120°

25

M6

φ54

g6

6

25

36 94

φ95

φD

3

105.5

56.5 11.5

φD

Unit set1)

nMandrels for flange mounting [TMASIT]

1 daN = 10 N

1 daN = 10 N

M10

32 tobler

Stan

dard

Exp

and

ing

Man

drels

TMASIT MandrelsRange of workpiece diameters: φ80 to 131 mm

Arbor / Drawbar Connector Driving Screw Unit Set1)

Order Code F-MAXI Order Code D3 Order Code Workpiece Diameter Range, D Expansibility

TMIT-4 3,500 daN TMITxxx41 80 - 131 TMITxxx-4 80 - 131 1

2) High-accuracy grinding of screw heads can be done if ordered.nEquipment that fits directly to A1-6” can be made to order.

Dimensions (mm)

1) High-accuracy grinding of units can be done if ordered.When placing an order, please specify the order code and quantity.Note: For details on the flange adaptor for mounting to the spindle

nose, see page 33.Maximum rotation speed when the workpiece is not clamped: 50 min-1

Dimensions (mm)

Arbor Unit set1)

Spare parts

Standard

1 2 3 4 5 6

Notes

Drawbar Connector Driving Screw Compensating

Washer Driving Pin Positioning Pin O-ring

TMIT-0TMIT-1TMIT-2TMIT-3TMIT-4

TMITD-0TMITD-1TMITD-2TMITD-3TMITD-4

TMITxxx-01TMITxxx-11TMITxxx-21TMITxxx-31TMITxxx-41

TMITR-0TMITR-1TMITR-2TMITR-3TMITR-4

TMITP-01TMITP-11TMITP-21TMITP-31TMITP-41

TMITT-0TMITT-1TMITT-2TMITT-3TMITT-4

TMITJT-01TMITJT-11TMITJT-21TMITJT-31TMITJT-41

Parts 1, 3, 4, 5 and 6 are accessories supplied with the arbor.


TMASIT

1

23 4

5

6

F-Maxi

Stroke: 4 mm

φD

105

nMandrels for flange mounting [TMASIT]

15

180

φ125 (3 × 120°)M8

φ105g6

18

45

165

φ133.4 (3 × 120°)

φD3

φ13

M20φ100H5

φ165

φ20

1 daN = 10 N

32 tobler tobler 33

Stan

dard

Exp

and

ing

Man

drels

Accessories Supplied with TMTPN, TMDI, TMTP and TMASIT Type Mandrels

Order Code Spindle Nose Type D D1 d I

TA1-5 5 135 104.8 82.58 16

TA1-6 6 165 133.4 106.39 18

TA1-8 8 220 171.4 139.735 20

When placing an order, please specify the order code and quantity.Note: TA1-8, TMASIT-0 to 3, and other flange adaptors are made

to order.

Dimensions (mm)

Order Code D1 D2 D3 E

TA1-515 35 51.5 25.5 5

TA1-610 35 61.0 25.5 5

TA1-800 35 80.0 25.5 5

TA1-1000 35 100.0 25.5 17

Dimensions (mm)

Flange adaptors for spindle nose mounting

Centering plates for mandrels

E

φD

1

φD

3

φD

2

Flange Adaptors Mandrels

5"

TA1-5

6"

TA1-6

8"

TA1-8

TA1-515

TA1-610

TA1-800

TMTP-1 TMTP-2 TMTP-3

TMTP-4 TMTP-5 TMTP-6

TMTP-7 TMTP-8 TMTP-9 TMTP-10

TMTPN-1 to TMTPN-9

TMDI-1 TMDI-2 TMDI-3

TMTPN-10

TA1-1000

nMandrels for flange mounting [TMTPN, TMDI, TMTP, TMASIT]

TMTP-11

6.5

φ35

M10 (3 × 120°)

φD1 d

42

φD

M6 (3 × 120°)φ60

(3 × 120°)

φ75

M12 × 3 (120° Spacing)

On φ133.4 for A1-6 and A1-8

φ85

I

TA1-1000

TA1-1000

TMTPN-13

TMASIT-4

TMDI-4

Centering Plates

TA1-6

TA1-8

Flange Adaptors MandrelsCentering Plates

TMASIT-0TMASIT-1TMASIT-2TMASIT-3

M10 (3 × 120°)

34 tobler

Stan

dard

Exp

and

ing

Man

drels

TCCCollets chuck by pullingTCC is a collets chucks with a pullback action, intended for the external bar chucking or billet clamping, using its removable stop which is provided with each chucks.

• Turning, milling

• Chucks range: 42, 65, 80 and 100

• Workpieces range: 5 mm – 100 mm

• Expansibility: 1,6 mm (+0,8 / -0,8)

• Concentricity: Adjustable by 3 screws

• Attachment: Spindle nose

• Actuation: Automatic by pulling

• Clamping: Smooth, serrated, hexagonal

• Run out setting

• Small and compact, increasing the rigity of the unit

• Workstop is easily removable for a bar chucking work.

• The same basic chuck can be fitted on different spindle noses by changing only the intermediate flange.

• Quick change of collets with extractor during change over. These collects are standard regardless the manufacturer.

nCollets chuck by pulling [TCC]

APPLICATION

TECHNICAL FEATURES

ADVANTAGES

34 tobler tobler 35

Stan

dard

Exp

and

ing

Man

drels

n Collets chuck by pulling [TCC]

TOBLER Type TCC42 TCC65

Code: for chuck with flange TCC42P5 TCC42P6 TCC65P5 TCC65P6 TCC65P8

Code: for chuck without flange TCC42 TCC42 TCC65 TCC65 TCC65

Code: flange TCC42-P05 TCC42-P06 TCC65-P05 TCC65-P06 TCC65-P08

Mounting A5 A6 A5 A6 A8

A 140 165 130 165 210

B 104.8 133.4 104.8 133.4 171.4

C M66x1.5 M66x1.5 M78x1.5 M78x1.5 M78x1.5

D 43 43 67 67 67

E 116 116 120 120 120

F 140 140 150 150 150

G 114.5 114.5 118 118 118

H 40 40 25.5 25.5 25.5

J 40 40 51 51 51

K M8 M8 M8 M8 M8

L 16.2 19.4 16.2 19.4 24.2

M M10 (4x90°) M12 (4x90°) M10 (4x90°) M12 (4x90°) M16 (4x90°)

N 17 19 16.5 19 23

Screw clamping torque (daN / m)

Cp1 5.5 5.5

Cp2 5.5 9 5.5 9 18

Security coefficient with f ’ = 2 x f 2.2 3 1.75 2.4 5.5

Collet type C42 C42 C65 C65 C65

Clamping capacity Max bar Ø. 42 42 65 65 65

Clamping capacity Max chucking Ø 42 42 65 65 65

Max speed rpm 6000 6000 6000 6000 4500

Pulling force max (f) daN 3500 3500 4500 4500 4500

Clamping force max daN 7000 7000 10000 10000 10000

Weight without flange kg 7 7 8 8 8

Weight with flange kg 9 9.5 9.5 10.5 13.5

TCC Basic chuck size 42 and 65

Order example : Chuck size 42 with a 6’’ flange Order code : TCC42P6

36 tobler

Stan

dard

Exp

and

ing

Man

drels

nCollets chuck by pulling [TCC]

TOBLER Type TCC80 TCC100

Code: for chuck with flange TCC80P6 TCC80P8 TCC100P6 TCC100P8

Code: for chuck without flange TCC80 TCC80 TCC100 TCC100

Code: flange TCC80-P06 TCC80-P08 TCC100-P06 TCC100-P08

Mounting A6 A8 A6 A8

A 165 210 165 210

B 133.4 171.4 133.4 171.4

C M92x1.5 M92x1.5 M95x2 M95x2

D 82 82 87 107

E 140 140 180 180

F 165 165 210 210

G 118 128 135 135

H 24.5 24.5 46 46

J 51 51 63 63

K M8 M8 M12 M12

L 19.4 24.2 19.4 24.2

M M12 (6x60°) M16(4x90°) M12 (6x60°) M16 (6x60°)

N 19 23 16 20

Screw clamping torque (daN / m)Cp1 5.5 5.5

Cp2 9 18 9 18

Security coefficient with f ’ = 2 x f 3.2 5 2.5 5.8

Collet type C80 C80 C100 C100

Clamping capacity Max bar Ø 80 80 100 100

Clamping capacity Max chucking Ø 80 80 100 100

Max speed rpm 5500 5500 4500 4500

Pulling force max (f) daN 5000 5000 6500 6500

Clamping force max daN 13000 13000 16900 16900

Weight without flange kg 9 9 18 18

Weight with flange kg 12 15 22 24

TCC Basic chuck size 80 and 100

Order example : Chuck size 80 with a 6’’ flange Order code : TCC80P6

36 tobler tobler 37

Stan

dard

Exp

and

ing

Man

drels

TCCPCollets chuck by pushing TCCP is a collets chucks with a pullback action, intended for the external bar chucking or billet clamping, using its removable stop which is provided with each chucks.

• Turning, milling

• Chucks range: 42, 65 and 80

• Workpieces range: 5 mm – 100 mm

• Expansibility: 1,6 mm (+0,8 / -0,8)

• Concentricity: Adjustable by 3 screws


• Actuation: Automatic by pulling

• Clamping: Smooth, serrated, hexagonal

• Run out setting

• Small and compact, increasing the rigity of the unit

• Workstop is easily removable for a bar chucking work.

• The same basic chuck can be fitted on different spindle noses by changing only the intermediate flange.

• Quick change of collets with extractor during change over. These collects are standard regardless the manufacturer.

nCollets chuck by pushing [TCCP]

APPLICATION

TECHNICAL FEATURES

ADVANTAGES

38 tobler

Stan

dard

Exp

and

ing

Man

drels


TOBLER Type TCCP42 TCCP65

Code: for chuck with flange TCCP42P5 TCCP42P6 TCCP65P5 TCCP65P6 TCCP65P8

Code: for chuck without flange TCCP42 TCCP42 TCCP65 TCCP65 TCCP65

Code: flange TCC42-P05 TCC42-P06 TCC65-P05 TCC65-P06 TCC65-P08

Mounting A5 A6 A5 A6 A8

A 140 165 130 165 210

B 104.8 133.4 104.8 133.4 171.4

C M66x1.5 M66x1.5 M78x1.5 M78x1.5 M78x1.5

D 43 43 67 67 67

E 116 116 140 140 140

F 140 140 150 150 150

G 114.5 114.5 107.5 107.5 107.5

H 40 40 78.5 78.5 78.5

J 40 40 49.6 49.6 49.6

K M8 M8 M8 M8 M8

L 16.2 19.4 16.2 19.4 24.2

M M10 (4x90°) M12 (4x90°) M10 (4x90°) M12 (4x90°) M16 (4x90°)

N 17 19 16.5 19 23

Screw clamping torque (daN / m)Cp1 5.5 5.5

Cp2 5.5 9 5.5 9 18

Security coefficient with f ’ = 2 x f 2.6 3.6 2.2 3 7.2

Collet type C42 C42 C65 C65 C65

Clamping capacity Max bar Ø 42 42 65 65 65

Clamping capacity Max chucking Ø 42 42 65 65 65

Max speed rpm 6000 6000 6000 6000 6000

Pushing force max (f) daN 3000 3000 3500 3500 3500

Clamping force max daN 7000 7000 8000 8000 8000

Weight without flange kg 6 6 7 7 7

Weight with flange kg 8 8.5 8.5 9.5 12.5

TCCP Basic chuck size 42 and 65

Order example : Chuck size 65 with a 8’’ flange Order code : TCCP65P8

38 tobler tobler 39

Stan

dard

Exp

and

ing

Man

drels


TOBLER Type TCCP80

Code: for chuck with flange TCCP80P6 TCCP80P8

Code: for chuck without flange TCCP80 TCCP80

Code: flange TCC100-P06 TCC100-P08

Mounting A6 A8

A 186 210

B 133.4 171.4

C M92X1.5 M92X1.5

D 82 82

E 165 165

F 210 210

G 110 128

H 78 78

J 49.6 49.6

K M8 M8

L 19.4 24.2

M M12 (6x60°) M16 (6x60°)

N 21 25

Screw clamping torque (daN / m)Cp1 5.5

Cp2 9 18

Security coefficient with f ’= 2 x f 3.2 7.6

Collet type C80 C80

Clamping capacity Max bar Ø 80 80

Clamping capacity Max chucking Ø 80 80

Max speed rpm 5500 5500

Pushing force max (f) daN 5000 5000

Clamping force max daN 13000 13000

Weight without flange kg 11 11

Weight with flange kg 15 17

TCCP Basic chuck size 80

Order example : Chuck size 80 with a 8’’ flange Order code : TCCP80P8

40 tobler

Stan

dard

Exp

and

ing

Man

drels

Smooth clamping Serrated clamping (s) Hexagonal clamp (H)

DiameterTCC42

TCCP42

TCC65

TCCP65

TCC80

TCCP80TCC100

TCC42

TCCP42

TCC65

TCCP65

TCC80

TCCP80TCC100

TCC42

TCCP42

TCC65

TCCP65

TCC80

TCCP80TCC100

5 C42-5 C65-5 C80-5

6 C42-6 C65-6 C80-6

7 C42-7 C65-7 C80-7

8 C42-8 C65-8 C80-8 C42H-8 C65H-8 C80H-8

9 C42-9 C65-9 C80-9 C42H-9 C65H-9 C80H-9

10 C42-10 C65-10 C80-10 C42H-10 C65H-10 C80H-10

11 C42-11 C65-11 C80-11 C42S-11 C65S-11 C80-S11 C42H-11 C65H-11 C80H-11




























39 C42-39 C65-39 C80-39 C42S-39 C65S-39 C80-S39 C65H-39 C80H-39

ACCESSORIES FOR TCC AND TCCP

Vulcanised collets for TCC or TCCP chucks

Clamping : Smooth Serrated Hexagonal

nAccessories [TCC - TCCP]

40 tobler tobler 41

Stan

dard

Exp

and

ing

Man

drels


DiameterTCC42

TCCP42

TCC65

TCCP65

TCC80

TCCP80TCC100

TCC42

TCCP42

TCC65

TCCP65

TCC80

TCCP80TCC100

TCC42

TCCP42

TCC65

TCCP65

TCC80

TCCP80TCC100

40 C42-40 C65-40 C80-40 C42S-40 C65S-40 C80-S40 C65H-40 C80H-40

41 C42-41 C65-41 C80-41 C42S-41 C65S-41 C80-S41 C65H-41 C80H-41

42 C42-42 C65-42 C80-42 C100-42 C42S-42 C65S-42 C80-S42 C100S-42 C65H-42 C80H-42

43 C65-43 C80-43 C100-43 C65S-43 C80-S43 C100S-43 C65H-43 C80H-43

44 C65-44 C80-44 C100-44 C65S-44 C80-S44 C100S-44 C65H-44 C80H-44

45 C65-45 C80-45 C100-45 C65S-45 C80-S45 C100S-45 C65H-45 C80H-45

46 C65-46 C80-46 C100-46 C65S-46 C80-S46 C100S-46 C65H-46 C80H-46

47 C65-47 C80-47 C100-47 C65S-47 C80-S47 C100S-47 C65H-47 C80H-47

48 C65-48 C80-48 C100-48 C65S-48 C80-S48 C100S-48 C65H-48 C80H-48

49 C65-49 C80-49 C100-49 C65S-49 C80-S49 C100S-49 C65H-49 C80H-49

50 C65-50 C80-50 C100-50 C65S-50 C80-S50 C100S-50 C65H-50 C80H-50 C100H-50







57 C65-57 C80-57 C100-57 C65S-57 C80-S57 C100S-57 C80H-57 C100H-57

58 C65-58 C80-58 C100-58 C65S-58 C80-S58 C100S-58 C80H-58 C100H-58

59 C65-59 C80-59 C100-59 C65S-59 C80-S59 C100S-59 C80H-59 C100H-59

60 C65-60 C80-60 C100-60 C65S-60 C80-S60 C100S-60 C80H-60 C100H-60

61 C65-61 C80-61 C100-61 C65S-61 C80-S61 C100S-61 C80H-61 C100H-61

62 C65-62 C80-62 C100-62 C65S-62 C80-S62 C100S-62 C80H-62 C100H-62

63 C65-63 C80-63 C100-63 C65S-63 C80-S63 C100S-63 C80H-63 C100H-63

64 C65-64 C80-64 C100-64 C65S-64 C80-S64 C100S-64 C80H-64 C100H-64

65 C65-65 C80-65 C100-65 C65S-65 C80-S65 C100S-65 C80H-65 C100H-65

66 C80-66 C100-66 C80-S66 C100S-66 C80H-66 C100H-66

67 C80-67 C100-67 C80-S67 C100S-67 C80H-67 C100H-67

68 C80-68 C100-68 C80-S68 C100S-68 C80H-68 C100H-68

69 C80-69 C100-69 C80-S69 C100S-69 C100H-69

70 C80-70 C100-70 C80-S70 C100S-70 C100H-70

71 C80-71 C100-71 C80-S71 C100S-71 C100H-71

72 C80-72 C100-72 C80-S72 C100S-72 C100H-72

73 C80-73 C100-73 C80-S73 C100S-73 C100H-73

74 C80-74 C100-74 C80-S74 C100S-74 C100H-74

75 C80-75 C100-75 C80-S75 C100S-75 C100H-75

76 C80-76 C100-76 C80-S76 C100S-76 C100H-76

77 C80-77 C100-77 C80-S77 C100S-77 C100H-77

78 C80-78 C100-78 C80-S78 C100S-78 C100H-78

79 C80-79 C100-79 C80-S79 C100S-79 C100H-79

Order example : Ø42 serrated collet for TCCP65 chuck Order code : C65S-42


42 tobler

Stan

dard

Exp

and

ing

Man

drels


DiameterTCC42

TCCP42

TCC65

TCCP65

TCC80

TCCP80TCC100

TCC42

TCCP42

TCC65

TCCP65

TCC80

TCCP80TCC100

TCC42

TCCP42

TCC65

TCCP65

TCC80

TCCP80TCC100

80 C80-80 C100-80 C80-S80 C100S-80 C100H-80

81 C100-81 C100S-81 C100H-81

82 C100-82 C100S-82 C100H-82

83 C100-83 C100S-83 C100H-83

84 C100-84 C100S-84 C100H-84

85 C100-85 C100S-85 C100H-85

86 C100-86 C100S-86 C100H-86

87 C100-87 C100S-87

88 C100-88 C100S-88

89 C100-89 C100S-89

90 C100-90 C100S-90

91 C100-91 C100S-91

92 C100-92 C100S-92

93 C100-93 C100S-93

94 C100-94 C100S-94

95 C100-95 C100S-95

96 C100-96 C100S-96

97 C100-97 C100S-97

98 C100-98 C100S-98

99 C100-99 C100S-99

100 C100-100 C100S-100

Order example : Ø60 smooth collet for TCC100 chuck Order code : C100-60


42 tobler tobler 43

Stan

dard

Exp

and

ing

Man

drels

In option, we can also adapt an ejector system on the TCCP chucks, either with air or spring loaded.

Extractor for smooth, serrated or hexagonal collets

For sizes : 42, 65, 80 and 100

OPTION : Ejector

For TCCP chucks

Order code Description

EP-C42 Collet extractor for TCC42 et TCCP42 chucks



EP-C100 Collet extractor for TCC100 chucks


44 tobler

Face Drivers

Appropriately equalizing the pressure of the driving pins, which is closely related to workpiece centre offsetting, makes it possible to drive even rough or inclined workpiece end faces.

A number of different types of driving pin have been prepared in order to ensure that all kinds of machining can be catered for.A tailstock force sufficient to drive the driving pins 0.2 mm into the end face of the workpiece is required.Guaranteed concentricity: 0.02 mm (T.I.R.)

The line-up of standard face drivers comprises the following three groups.

STANDARD FACE DRIVERS

Options fitted depending on external shape

HD type face driversApplicable workpieces: Small-diameter workpieces

Mounting method: Morse taperDriving pin pressure equalizing method: Plastic ring

N type face driversApplicable workpieces: Large-diameter workpieces

Mounting method: Morse taper and flangeDriving pin pressure equalizing method: Hydraulic

COMBI type face driversApplicable workpieces: Large-diameter workpieces

Mounting method: FlangeDriving pin pressure equalizing method: HydraulicA modular construction is adopted and we can also build to order.

nStandard Face Drivers

Standard line-up

44 tobler tobler 45

Face Drivers

N Type Face Drivers

COMBI Type Face Drivers

Size Driving Diameter Maximum Workpiece Mass (kg) Maximum Diameter

COMBI 18 12.0 - 18.5

The maximum mass of workpiece differs

depending on the spring preload.

12.0 - 55.5

COMBI 29 22.5 - 29.0 22.5 - 87.0

COMBI 46 33.0 - 46.0 33.0 - 138.0

COMBI 70 57.0 - 70.0 57.0 - 210.0

COMBI 90 77.0 - 90.0 77.0 - 270.0

COMBI 112 99.0 - 112.0 99.0 - 336.0

COMBI 138 125.0 - 138.0 125.0 - 414.0

Dimensions (mm)

HD Type Face Drivers

Mounting Type / Size Size Driving Diameter Maximum Workpiece Mass (kg) Maximum Diameter

MT 2MT 3MT 4MT 5MT 6

HD 30 7 - 14 50 7 - 42

HD 31 10 - 17 50 10 - 51

HD 32 16 - 26 55 16 - 78

MT 3MT 4MT 5MT 6

HD 33 24 - 38 65 24 - 114

MT 4MT 5MT 6

HD 34 33 - 53 105 33 - 159

Dimensions (mm)

nStandard Face Drivers

Taper mounted type

Mounting Type / Size Size Driving Diameter Maximum Workpiece Mass (kg) Maximum Diameter

MT 4MT 5MT 6

N 62 24 - 44 78 24 - 132

MT 5MT 6

N 63 36 - 61 110 36 - 183

N 64 40 - 74 110 40 - 222

MT 6 N 66 82 - 110 240 82 - 330

Dimensions (mm)

Flange mounted type

Size Driving Diameter Maximum Workpiece Mass (kg) Maximum Diameter

N 62 24 - 44 78 24 - 132

N 63 36 - 61 110 36 - 183

N 64 40 - 74 110 40 - 222

N 66 82 - 110 240 82 - 330

N 68 118 - 146 560 118 - 438

Dimensions (mm)

46 tobler

Face Drivers

HDDriving diameter: φ7 to 53 mm

These face drivers are suited to finishing and light rough cutting of small to large lots. In addition to gripping with the chuck soft jaws, they can also be directly mounted in the Morse taper of the spindle (MT2 to 6 depending on the size of the face driver).

Driving diameters from 7 mm to 53 mm are covered with five sizes of face driver, enabling the driving of workpieces up to 105 kg.

The pressure of the driving pins are equalized by means of the elastic deformation of the plastic ring, and workpiece end face inclinations of up to 5 degrees and axial differences between individual driving pins of up to 3 mm can be accommodated.

Model Order Code Number of Driving Pins

Maximum Workpiece Mass (kg)

Dimensions (mm)

D D1 L3 L4 L5 D3 L1 L2

HD 30 Driving Diameter D2: 7 to 14 mm


20-1830-4139920-1830-4140020-1830-4140120-1830-4140220-1830-41403

4 50 42 30 33.0 5.0 3.0 –

136155168188220

66.567.568.568.568.5



20-1831-4140620-1831-4140720-1831-4140820-1831-4140920-1831-41410

5 50 42 30 25.0 7.0 4.0 4

129148161181213

57.558.559.559.559.5



20-1832-4141320-1832-4141420-1832-4141520-1832-4141620-1832-41417

5 55 52 40 26.5 7.5 6.5 9

134153168190218

62.063.064.068.064.0


MT 3MT 4MT 5MT 6

20-1833-4142120-1833-4142220-1833-4142320-1833-41424

6 65 70 54 34.5 12.0 9.5 14

170183203235

75.076.076.076.0


MT 4MT 5MT 6

20-1834-4142720-1834-4142820-1834-41429

6 105828292

82 44.0 14.0 11.0 18207219251

90.5

All the face drivers are delivered with “form B” driving pins (see next page).When placing an order, please specify the order code and quantity.

These face drivers are suited to finishing and light rough cutting of small to large lots. In addition to gripping with the chuck soft jaws, they can also be directly mounted in the Morse

Driving diameters from 7 mm to 53 mm are covered with five sizes of face driver, enabling the

The pressure of the driving pins are equalized by means of the elastic deformation of the plastic ring, and

1. End plug 2. Spacer 4. Spring 5. Shank 11. Plastic Ring 12. Centre Pin 14. Centre Retainer 15. Driving Head 16. Driving Pin Retainer 17. Screw 18. Thrust Pad 19. Driving Pins

nStandard face drivers [HD]

21. Centre 22. Cap Retaining

Screw 23. Nose Cap

46 tobler tobler 47

Face Drivers

Driving pins

φD2 Driving Diameter

Direction of Rotation Driving Pin Order Code Z φd Form

Tailstock Force (daN)

Minimum Maximum

Type HD 30

φ7 RL

83-1830-4303183-1830-43032

1.51.5

55

GC

150150

210210

φ9 RL

83-1830-4303383-1830-43034

2.52.5

55

EF

250250

350350

φ14

R83-1830-4303283-1830-4303483-1830-43030

1.52.55.0

555

CFB

150250500

210350700

L83-1830-4303183-1830-4303383-1830-43030

1.52.55.0

555

GEB

150250500

210350700

R + L 83-1830-43035 5.0 5 D 500 700

Type HD 31

φ10 RL

83-1830-4303183-1830-43032

1.51.5

55

GC

190190

260260

φ12 RL

83-1830-4303383-1830-43034

2.52.5

55

EF

315315

435435

φ17

R83-1830-4303283-1830-4303483-1830-43030

1.52.55.0

555

CFB

190315625

260435875

L83-1830-4303183-1830-4303383-1830-43030

1.52.55.0

555

GEB

190315625

260435875

R + L 83-1830-43035 5.0 5 D 625 875

Type HD 32

φ16 RL

83-1832-4304083-1832-43041

2.02.0

77

GC

250250

350350

φ19 RL

83-1832-4304283-1832-43043

3.53.5

77

EF

440440

610610

φ26

R83-1832-4304183-1832-4304383-1832-43039

2.03.57.0

777

CFB

250440875

350610

1,225

L83-1832-4304083-1832-4304283-1832-43039

2.03.57.0

777

GEB

250440875

350610

1,225

R + L 83-1832-43044 7.0 7 D 875 1,225

Type HD 33

φ24 RL

83-1833-4304883-1833-43049

2.02.0

99

GC

300300

420420

φ29 RL

83-1833-4305083-1833-43051

4.54.5

99

EF

675675

945945

φ38

R83-1833-4304983-1833-4305183-1833-43047

2.04.59.0

999

CFB

300675

1,350

420945

1,890

L83-1833-4304883-1833-4305083-1833-43047

2.04.59.0

999

GEB

300675

1,350

420945

1,890

R + L 83-1833-43052 9.0 9 D 1,350 1,890

Type HD 34

φ33 RL

83-1834-4305783-1834-43064

3.03.0

1313

GC

450450

630630

φ40 RL

83-1834-4305883-1834-43059

6.56.5

1313

EF

975975

1,3651,365

Form A

Form B

Form C

Form D Symmetric

Form E

Form F

Form G

nStandard face drivers [HD]

R

L

1 daN = 10 N

φ53

R

83-1834-4306483-1834-4305983-1834-4305683-1834-43055

3.06.58.013.0

13131313

CFAB

450975

1,2001,950

6301,3651,6802,730

L

83-1834-4305783-1834-4305883-1834-4305683-1834-43055

3.06.58.013.0

13131313

GEAB

450975

1,2001,950

6301,3651,6802,730

R + L 83-1834-43060 13.0 13 D 1,950 2,730


48 tobler

Face Drivers

NDriving diameter: φ24 to 146 mm

These face drivers are used in turning for finishing or roughing operations. They are mainly mounted using a Morse taper and a draw-off nut is supplied when used with high tailstock force. MT4 to MT6 Morse taper shanks are available depending on the face driver size.

However, when higher stability and rigidity during driving are required, the flange mount type is used. (Suitable for spindle nose sizes 6” to 11”.)

Driving diameters from 24 mm to 146 mm are covered with five sizes of face driver, enabling the driving of workpieces up to 560 kg.

The pressure equalization on the driving pins is by means of a hydraulic mechanism which permits a 7 degree angle of inclination of the end face of the workpiece and a 7.5 mm axial difference between the individual driving pins.


Maximum Workpiece Mass (kg)

Dimensions (mm)

D1 L3 L4 L5 D3 D L1 L2

N62 Driving Diameter D2: 24 to 44 mm

MT 4MT 5MT 6Flange Mounted Type

20-1862-4070120-1862-4070220-1862-4070320-1862-40720

5 78 63 31 9 7 12

828282125

203220251199

10410610991


MT 5MT 6Flange Mounted Type

20-1863-4070720-1863-4070820-1863-40721

5 110 84 40 15 9 18122122160

261292256

135138113


MT 5MT 6Flange Mounted Type

20-1864-4071120-1864-4071220-1864-40722

6 110 95 39 15 9 20122122160

258289253

132135110


MT 6Flange Mounted Type

20-1866-4071520-1866-40723 6 240 134 58 20 12 30 158

180307300

154132


Flange Mounted Type 20-1868-40724 6 560 168 58 25 10 40 210 285 131

All the face drivers are delivered with “form A” driving pins (see next page).When placing an order, please specify the order code and quantity.

Flange Mounted TypeTaper Mounted Type

1. End Plug 2. Spacer 3. Spring Seat 4. Spring 5. Shank

Taper Mounted Type

Flange Mounted Type

These face drivers are used in turning for finishing or roughing operations.

nStandard face drivers [N]

6. Oil Refill Hole Screw 7. Oil Refill Hole 8. Flange Body 10. Piston Assembly

Including Seals 13. O-rings 14. Centre Retainer 15. Driving Head 16. Driving Pin Retainer 17. Screw 19. Driving Pins 21. Centre 22. Locking Screw 23. Nose Cap 24. Draw Off Nut

24 1

48 tobler tobler 49

Face Drivers

Driving pins

φD2 Driving Diameter

Direction of Rotation Driving Pin Order Code Z φd Form


Minimum Maximum

N62

φ24 RL

83-1834-4305783-1834-43064

3.03.0

1313

GC

375375

525525

φ31 RL

83-1834-4305883-1834-43059

6.56.5

1313

EF

815815

1,1351,135

φ44

R

83-1834-4306483-1834-4305983-1834-4305683-1834-43055

3.06.58.013.0

13131313

CFAB

375815

1,0001,625

5251,1351,4002,275

L

83-1834-4305783-1834-4305883-1834-4305683-1834-43055

3.06.58.013.0

13131313

GEAB

375815

1,0001,625

5251,1351,4002,275

R + L 83-1834-43060 13.0 13 D 1,625 2,275

N63

φ36 RL

83-1864-4306783-1864-43068

4.54.5

1717

GC

565565

785785

φ44 RL

83-1864-4306983-1864-43070

8.58.5

1717

EF

1,0651,065

1,4851,485

φ61

R

83-1864-4306883-1864-4307083-1864-4306683-1864-43065

4.58.510.017.0

17171717

CFAB

5651,0651,2502,125

7851,4851,7502,975

L

83-1864-4306783-1864-4306983-1864-4306683-1864-43065

4.58.510.017.0

17171717

GEAB

5651,0651,2502,125

7851,4851,7502,975

R + L 83-1864-43071 17.0 17 D 2,125 2,975

N64

φ40 RL

83-1864-4306783-1864-43068

4.54.5

1717

GC

675675

945945

φ57 RL

83-1864-4306983-1864-43070

8.58.5

1717

EF

1,2751,265

1,7851,785

φ74

R

83-1864-4306883-1864-4307083-1864-4306683-1864-43065

4.58.510.017.0

17171717

CFAB

6751,2751,5002,550

9451,7852,1003,570

L

83-1864-4306783-1864-4306983-1864-4306683-1864-43065

4.58.510.017.0

17171717

GEAB

6751,2751,5002,550

9451,7852,1003,570

R + L 83-1864-43071 17.0 17 D 2,550 3,570

N66 N68

φ82 φ118 RL

83-1866-4307783-1866-43078

6.06.0

2020

GC

900900

1,2601,260

φ90 φ126 RL

83-1866-4307983-1866-43080

10.010.0

2020

EF

1,5001,500

2,1002,100

φ110 φ146

R

83-1866-4307883-1866-4308083-1866-4307683-1866-43075

6.010.012.020.0

20202020

CFAB

9001,5001,8003,000

1,2602,1002,5204,200

L

83-1866-4307783-1866-4307983-1866-4307683-1866-43075

6.010.012.020.0

20202020

GEAB

9001,5001,8003,000

1,2602,1002,5204,200

R + L 83-1866-43081 20.0 20 D 3,000 4,200


Form A

Form G

Form E

Form B

Form C

Form D Symmetric

Form F

nStandard face drivers [N]

R

L

1 daN = 10 N

50 tobler

Face Drivers

COMBIDriving diameter: φ12 to 138 mm

These face drivers are designed for light machining and medium roughing operations for use on copying lathes and NC lathes.

They are available in a flange mounted type or a chuck mounted type. The flange mounted type is suitable for spindle nose sizes 5” to 15”.

Driving diameters from 12 mm to 138 mm are covered with seven sizes of face driver, enabling the driving of workpieces up to 430 kg.

With COMBI 29-138 face drivers, the pressure is equalized among the driving pins by means of a hydraulic mechanism. This mechanism can accommodate a maximum inclination at the workpiece end face of 7 degrees and a maximum positional difference in the axial direction among driving pins of 3 mm.

COMBI 18 face drivers use plastic rings for pressure equalization and can accommodate a maximum inclination at the workpiece end face of 5 degrees and a maximum positional difference in the axial direction among driving pins of 7.5 mm.

The COMBI face drivers comprise three main sections: the driving head, the driving pins and the center return spring element. Order the three sections separately and assemble them for use.


Dimensions (mm)

D D1 D2 D3 L1 L2 L3 L4 L5

COMBI 18 φD4: 12 to 18.5 mm

Flange MountedChuck Mounted

20-1871-4297120-1871-42871 4 244

–196.87

130 80 –– 114 68

7318– 4 5

COMBI 29 φD4: 22.5 to 29 mm


20-1872-4297220-1872-42872 5 244

–196.87

130 85 8 117 6867

18– 7 5

COMBI 46 φD4: 33 to 46 mm


20-1873-4297320-1873-42873 6 244

–196.87

130 96 12 119 68 18– 9 9



20-1874-4297420-1874-42874 6 244

–196.87

130 126 14 122 6867

18– 12 9



20-1875-4297520-1875-42875 6 244

–196.87

195 146 14 122 6874

18– 12 9



20-1876-4297620-1876-42876 6 244

–196.87

195 170 15 122 6884

18– 12 9

COMBI 138 φD4: 125 to 138 mm


20-1877-4297720-1877-42877 6 244

–196.87

195 194 15 122 6887

18– 12 9

Note: Order the driving pins and the spring element separately.When placing an order, please specify the order code and quantity.

Chuck Mounted TypeFlange Mounted Type

nStandard Face Drivers [COMBI]

50 tobler tobler 51

Face Drivers

Driving pinsCOMBI 18 φD4: 12.0 to 18.5 mm

Type 18

φD4 Driving Diameter (mm) Direction of Rotation

Driving Pin Ordering Code Z φd Form


Minimum Maximum

12.0 / 18.515.0 / 18.514.5 / 18.5

18.518.5

R + LR + LR + LR + LR + L

83-1872-4309083-1872-4377283-1872-4309183-1872-4309483-1872-43098

3.755.255.007.007.00

77777

ABCDF

375525500700700

525735700980980

COMBI 29 φD4: 22.5 to 29.0 mm

Type 29

22.5 / 29.025.5 / 29.025.0 / 29.0

29.029.0

R + LR + LR + LR + LR + L

83-1872-4309083-1872-4377283-1872-4309183-1872-4309483-1872-43098

3.755.255.007.007.00

77777

ABCDF

470660625875875

655915875

1,2251,225

COMBI 46-138 φD4: 33.0 to 138 mm

Type 46 Type 70 Type 90 Type 112 Type 138

33 57 77 99 125

RRLL

R + L

83-1873-4312983-1873-4312883-1873-4312783-1873-4313083-1873-43121

6.56.56.56.56.5

1313131313

EIGHA

975975975975975

1,3651,3651,3651,3651,365

37 61 81 103 129 R + L 83-1873-43122 8.5 13 B 1,275 1,785

33 / 46 57 / 70 77 / 90 99 / 112 125 / 138 R + L 83-1873-43123 6.5 13 C 975 1,365

46 70 90 112 138

LR

R + LR + L

83-1873-4312883-1873-4313083-1873-4312483-1873-43126

6.56.513.013.0

13131313

IHDF

975975

1,9501,950

1,3651,3652,7302,730


Form E Asymmetric

Form D Symmetric

Form I Asymmetric

Form C Symmetric

Form H Asymmetric

Form B Symmetric

Form G Asymmetric

Form A Symmetric

Form F Asymmetric

nStandard Face Drivers [COMBI]

R

L

COMBI 18

COMBI 29-138

4. Spring 6. Inlet Screw 7. Oil Refill Hole 8. Flange Body 9. Piston Stop 10. Piston Assembly

Including Seals

11. Plastic Ring 13. O-rings 14. Centre Retainer 15. Driving Head 16. Driving Pin Retainer 17. Screw 18. Thrust Pad 19. Driving Pins 20. Pressure Pin 21. Centre 22. Cap Retaining Screw 23. Nose Cap 24. Retainer Key 25. Centre

1 daN = 10 N

52 tobler

Face Drivers

The spring element can be adjusted independently.

Type Order CodeDimensions Max. Workpiece Mass

(kg) for Adjustment Tailstock Force (daN)D L

Adjustable Pressure Type 20-1871-41246 45 212

70105140175210240280310350380

406080100120140160180200220

Unadjustable Short Type

20-1871-4367120-1871-41603

6068

6669

175430

40 - 10070 - 265

Dimensions (mm)

DIN 55021AISO / 702 / IIIDIN 55027

ISO / 702 IDIN 55026

Camlock TypeISO702 / IIDIN 55029

Flange Mounted

For Spindle Nose 5" 6" 8" 11" 15"

DIN 55021ADIN 55021B / ISO / 702 / IDIN 55022 / ISO / 702 / III

20-1881-42911 20-1881-42912 20-1881-42913 20-1881-42914 20-1881-42915

Camlock Type ISO / 702 / II – 20-1882-42916 20-1882-42917 20-1882-42918 –

ISO / 702 / IIIDIN 55027

Flange Mounted

For Spindle Nose 5" 6" 8" 11"

Type N62

DIN 55021ADIN 55026 / ISO / 702 / IDIN 55027 / ISO / 702 / III

20-4126220-4126220-41262

20-4126320-4126420-41263

20-4126520-4126620-41265

Type N63 – N64


20-4126720-4126720-41267

20-4126820-4126820-41268

20-4126920-4127020-41269

20-4127120-4127220-41271

Type N66


20-4127320-4127320-41273

20-4127420-4127520-41274

20-4127620-4127720-41276

Type N68


20-4127820-4127820-41278

20-4127920-4128020-41279


ISO / 702 / IDIN 55026

DIN 55021A

Spare Parts / Accessories

N Face Drivers

COMBI Face Drivers

nStandard Face Drivers [Spare Parts / Accessories]

1 daN = 10 N

52 tobler tobler 53

Face Drivers

Spare Parts

Face Driver Centre Set Piston Set Nose Cap O-Ring Set

HD 30HD 31HD 32HD 33HD 34 (MT4-5)HD 34 (MT6)

83-1830-4303783-1831-4303883-1832-4304683-1833-4305483-1834-4306283-1834-43085

––––––

83-1830-4353083-1830-4353083-1832-4353283-1833-4353383-1834-4353483-1834-43634

––––––

N 62N 63N 64N 66N 68

83-1862-4306383-1863-4307383-1864-4307483-1866-4308383-1868-43084

83-1862-4396283-1864-4396483-1864-4396483-1866-4396683-1866-43966

83-1862-4356283-1863-4356383-1864-4356483-1866-4356683-1868-43568

83-1862-4386283-1863-4386383-1864-4386483-1866-4386683-1868-43868

COMBI 18COMBI 29COMBI 46COMBI 70COMBI 90COMBI 112COMBI 138

83-1871-4308983-1872-4309283-1873-4313283-1874-4313383-1875-4313483-1876-4313583-1877-43136

–83-1862-4396283-1862-4396283-1862-4396283-1862-4396283-1862-4396283-1862-43962

83-1871-4357183-1872-4357283-1873-4357383-1874-4357483-1875-4357583-1876-4357683-1877-43577

–83-1872-4387283-1873-4387383-1874-4387483-1875-4387583-1876-4387683-1877-43877


Spare Parts

Face Driver Spring Plastic Ring Driving Head Thrust Pad Set

HD 30HD 31HD 32HD 33HD 34 (MT4-5)HD 34 (MT6)

83-1830-2158383-1830-2158383-1832-2162883-1833-2165583-1834-21687

–

20-1830-2157920-1831-2161620-1832-2162420-1833-2156320-1834-21683

–

83-1830-2157683-1831-2161483-1832-2162083-1833-2164783-1834-2167883-1834-21679

83-1830-4373083-1831-4373183-1832-4373283-1833-4373383-1834-43734

–

N 62N 63N 64N 66N 68

83-1862-2132983-1864-2136883-1864-21368

––

–––––

–––––

–––––

COMBI 18COMBI 29COMBI 46COMBI 70COMBI 90COMBI 112COMBI 138

–––––––

20-1872-21176––––––

–––––––

83-1871-4377183-1872-43972

–––––


Spare Parts / Accessories

nStandard Face Drivers [Spare Parts / Accessories]

54 tobler54 tobler

Face Drivers

Face Driver with Hydraulic Compensation

Face Driver with Mechanical Compensation (Suitable for Flange Type Workpieces)

Examples Examples of face drivers built to order

nStandard Face Drivers [Examples]

54 tobler tobler 5554 tobler


nCustom Chucks and Mandrels

TOBLER’s products are used as much for unitary production as for mass production.

Our Teams constantly innovate the clamping technology to provide a solution adapted to the application and accuracy expected by the Customer.

Customized range

Quick workholding change system, Knuckle chucks

(TMS, TMR)

Knuckle retractable arms chucks, Diaphragm chucks

(TMRBE, TMAD)

Inserts mandrels, Double taper expanding sleeve mandrels

(TMAC, TMADC)

Collets chucks, Segmented mandrels

(TMAP, TMAS)

Swivel arms chucks, Hydraulic membrane chucks or mandrels

(TMABT, TMAM)

Self-clamping mandrels

(TBAS)

56 tobler56 tobler

TMSQuick workholding change system TMS is a manual quick workholding change system with a self centering on its taper/face and a pull back system by 3 quick-locking screws in a half turn of the key.

TMRKnuckle chucks TMR is a knuckle chuck with a pull back action, equiped with 3 or 6 jaws.

• Any machining processes

• Turning

• Actuation: By a simple cylinder

• Attachment: 6, 8, 11 et 15’’

• Workhlding interchangeability is performed by an Operator

• Chucks sizes: 160, 200, 230, 315 and 350


• Actuation: Automatic

• External or internal clamping: Smooth or serrated

• Air sensing control on the workstop: With or without

• Chips blowing or coolant in the center: With or without

• High Accuracy: Concentricity ≤ 5μ

• Simple and fast, saving your time during change over, allowing flexibility to your machines.

• Precision, robustness, tightness, high clamping torque transmission, centrifugal force compensation

• Quick change of jaws with TMCR system in less than one minute, without run out settings.

APPLICATION

APPLICATION

TECHNICAL FEATURES

ADVANTAGES

ADVANTAGES

TECHNICAL FEATURES


56 tobler tobler 57

Cu

stom

Ch

ucks an

d M

and

rels

56 tobler

TMRBEKnuckle retractable arms chucksTMRBE is a knuckle retractable arms chuck, equipped with a face driver allowing shaft clamping in between centers.

TMADDiaphragm chucks TMAD is a diaphragm chuck customized for a final machining process on gears and crown gears.

• Turning

• Hard turning and grinding

• Actuation: Automatic with a double cylinder piston

• External clamping: By smooth or spiked floating jaws

• Internal centering: By a face driver equipped with a center or by an expanding mandrel

• Chucks sizes: 160, 220 et 315



• External clamping: Smooth or on spline



• Facial clamping with rotating arms: With or without

• Precision, robustness, tightness, high clamping torque transmission, centrifugal force compensation

• Quick change of the equipment

• Hight Accuracy, robustness, totally sealed, maintenance fee, high clamping torque transmission, centrifugal force compensation

• Quick change of jaws with TMCR system in less than one minute, without run out settings.

APPLICATION

APPLICATION

TECHNICAL FEATURES

ADVANTAGES

ADVANTAGES

TECHNICAL FEATURES


58 tobler

Cu

stom

Ch

ucks an

d M

and

rels

TMACInserts mandrels TMAC is a high-performance inserts mandrel that allows large-scale production for internal or external clamping of the workpiece.

TMADCDouble taper expanding sleeve mandrels TMADC is a double taper expanding sleeve mandrel, designed for internal or external clamping, perfectly cylindrical on the whole surface.

• Turning, hobing, shaving, grinding, balancing, inspection and handling

• Turning, grinding, inspection

• Attachment: Spindle nose, in between centers

• Actuation: Automatic or Manual

• Internal or external clamping: smooth, spline and various shapes with one or more rows of inserts.


• Attachment: Spindle nose, in between centers


• Internal clamping: smooth or on spline


• High accuracy and repeatability, robustness, durability, reliability

• Inserts compensation system which allows to clamp multiple workpieces simultaneously to increase your productivity.

• Accuracy: Concentricity ≤ 10μ

• Repeatability, robustness, durability, reliability

• Clamping technology to swing the workpiece through its bore, despite the probability lack of cylindricity of the workpiece.

APPLICATION

APPLICATION

TECHNICAL FEATURES

ADVANTAGES

ADVANTAGES

TECHNICAL FEATURES


58 tobler tobler 59

Cu

stom

Ch

ucks an

d M

and

rels

TMAPCollets chucks TMAP is a collets chuck, designed for a smooth external clamping with various profiles.

TMASSegmented mandrels TMAS is a mandrel with interchangeable segmented collet, designed for internal short parts requiring heavy machining efforts.

• Turning, grinding

• Turning, hobbing



• External clamping: smooth or various profiles




• Internal clamping: Smooth



• Accuracy: Concentricity ≤ 10μ

• Repeatability, durability and reliability

• Technology with an enveloping clamping.

• Accuracy, repeatability, robustness, durability, reliability

• Technology with an enveloping clamping which allows to transmit a large tightening torque on the workpiece.

APPLICATION

APPLICATION

TECHNICAL FEATURES

ADVANTAGES

ADVANTAGES

TECHNICAL FEATURES


60 tobler

Cu

stom

Ch

ucks an

d M

and

rels

TMABTSwivel arms chucks TMABT is a rotating arms chuck for an effective clamping with internal or external positioning and centering of the workpiece. Usually used for thin and deformable parts.

TMAMHydraulic membrane chucks or mandrels TMAM is a hydraulic membrane chuck or mandrel designed for perfectly cylindrical internal or external clamping over the entire surface.

• Turning, grinding

• Hard turning, grinding



• Internal or external clamping



• Attachment: Spindle nose or in between centers


• Internal or external clamping: smooth with one or further membranes


• Accuracy, robustness, totally sealed, high clamping force on deformable workpiece

• Quick change of the equipments

• High Accuracy: Concentricity ≤ 5μ

• Repeatability, durability and reliability

• Total sealing of the unit which provides a protection against chips and cutting coolant

APPLICATION

APPLICATION

TECHNICAL FEATURES

TECHNICAL FEATURES

AVANTAGES

ADVANTAGES


60 tobler tobler 61

Cu

stom

Ch

ucks an

d M

and

rels

TBASSelf clamping mandrel TBAS is a compressible mandrel by the body’s elasticity distortion of the steel, coated with titanium nitride.

• Run out Inspection, centering

• Fixation: Entre-pointes or plateau

• Actuation: Manual

• Inside clamping: Smooth or on spline

• High accuracy: Concentricity ≤ 5μ

• Easy to be used

APPLICATION

TECHNICAL FEATURES

ADVANTAGES


62 tobler

MILLING FIXTURES

nMilling Fixtures

Our workholding fixtures systems allow to locate and to hold one or more workpieces during milling operations in order to increase the productivity rate.

Workholding fixtures range

62 tobler tobler 63

MILLIN

G F

IXT

UR

ES

nMilling Fixtures

MILLING FIXTURESClamping devices With our clamping expertise, allowing the implementation of one or more workpieces during milling operations, our Design Office’s Team innovates constantly the clamping technology in Partnership with our Customers.

• Milling

• Attachment: Machine table or rotary table

• Actuation: Hydraulic or manual

• Equipment to be defined according to Customer’s parts and machining processes.

• Possibility to machine several parts to increase your productivity rate.

APPLICATION

TECHNICAL FEATURES

ADVANTAGES

TOBLER S.A.S.Head office

4, Avenue de la Vieille France95380 Louvres, France

Phone : + 33.1.34.47.33.00Fax : + 33.1.34.72.36.67

Web Sitehttp://www.altifort-tobler.com/

Please feel free to contact our Team if you have any questions regarding our clamping technology. We would also be pleased to provide

our various services to accompany you in all your projects.

SupportAbility to drive projects.

InstallationProvide technician on site.

MaintenanceChange parts on request.

RepairIn customer’s permisses

or on site TOBLER.

InformationHotline.

InterventionNeed for expertise on customer site.

SERVICES

Documents

Product Catalogma2ndanismanlik.com/wp-content/uploads/2020/06/TOBLER_Catalo… · TOBLER is a worlwide leader in workholding solutions with high quality and precision expanding mandrels