7.1.1

STANDARD TRIM TABLE OF CONTENTS

Standard Trim Product Description .................................................................................2Trim Features........................................................................................................ .2

Standard Trim and Hardware Accessories .....................................................................3ST0010PE – Low Eave Trim..................................................................................3ST0020PE – Rake, Ridge, and High Eave Trim....................................................4ST0030PE – Wall Trim and Roof Line Corner Pieces ...........................................5ST0040PE – Roof Line Corner Pieces ..................................................................6ST0050PE – Wall Trim ..........................................................................................7ST0060PE – Framed Opening Trim ......................................................................8ST0070PE – Nucor CFR™ Roof Hardware...........................................................9ST0080PE – Nucor CFR™ Roof Hardware.........................................................10ST0090PE – Nucor CFR™ Roof Tape Mastic and Caulk....................................11V2SSEM0430 – Nucor VR16 II™ Roof Hardware...............................................12V2SSEM0440 – Nucor VR16 II™ Roof Hardware...............................................13VSSEM0450 – Nucor VR16 II™ Roof Tape Mastic and Caulk............................14ST0100PE – Fasteners........................................................................................15

LAST REVISIONDATE: 03/02/15BY: AAJ CHK: MDK

7.1.2

STANDARD TRIM PRODUCT DESCRIPTION

TRIM FEATURES

1. Most Nucor standard trim is precision roll formed.2. Standard colors compliment wall panel selection.3. All roof line trim (gutter, eave, & rake) and standard base angle flash are

available in burnished slate as standard, polar white as an option. Other colorsare available at additional charge.

4. All wall trim (corner, head, jamb, downspout assembly, & optional base flash) isavailable in all standard Nucor colors, and will match the wall panel color unlessotherwise noted at time of order.

5. Downspout assembly & Optional base flash are available in all Nucor standardcolors and will be selected by the customer.

For additional information about Nucor Building Systems standard trim, including dimensions, materials, and pricing, see the Nucor Building Systems website at the below link or contact the your Nucor Building Systems division to obtain credentials for accessing the eComponents web based components tool.

eComponents

Notice: In keeping with a program of continuous and never ending improvement all information contained herein is subject to change without notice.

LAST REVISIONDATE: 07/10/12BY: AES CHK: EGB

DETAIL NAME IF APPLICABLEST0010PE.DWG 7.1.3

STANDARD TRIM AND HARDWARE ACCESSORIES

ST0010PE – LOW EAVE TRIM

LAST REVISIONDATE: 02/09/01BY: CDM CHK: RJF

DETAIL NAME IF APPLICABLEST0020PE.DWG 7.1.4

ST0020PE – RAKE, RIDGE, AND HIGH EAVE TRIM

LAST REVISIONDATE: 02/09/01BY: CDM CHK: RJF

DETAIL NAME IF APPLICABLEST0030PE.DWG 7.1.5

ST0030PE – WALL TRIM AND ROOF LINE CORNER PIECES

LAST REVISIONDATE: 12/10/14BY: KMC CHK: EGB

DETAIL NAME IF APPLICABLEST0040PE.DWG 7.1.6

ST0040PE – ROOF LINE CORNER PIECES

LAST REVISIONDATE: 12/10/14BY: KMC CHK: EGB

DETAIL NAME IF APPLICABLEST0050PE.DWG 7.1.7

ST0050PE – WALL TRIM

LAST REVISIONDATE: 02/16/15BY: AK CHK: EGB

DETAIL NAME IF APPLICABLEST0060PE.DWG 7.1.8

ST0060PE – FRAMED OPENING TRIM

2 1/

4"

PLASTIC DOOR END CLOSURE(For Optional Base Trim at F. O.'s)Left and Right Part included as shown

3"

Part NumbersCCA___-8" GirtsCCB___-10" GirtsCCC___-12" Girts

3"

or 12 1/8"8 1/8", 10 1/8"

JAMB COVER TRIM26 Gauge Steel

1 1/

8"

3"

Girt DepthBased on

Part No. JTD__

1 1/

4"

Part No. H4220

Part No. STA__

JAMB TRIMFor Classic and Accent Panel26 Gauge Steel

SILL TRIM26 Gauge Steel

JAMB TRIMFor Reverse Classic Panel26 Gauge Steel

1 1/

2"

1 3/4"

Part No. HTA__

1/2"

5"

HEAD TRIM26 Gauge Steel

1"

Part No. JTA__

5 1/2"

2 1/4"1 1/

4"

1"

LAST REVISIONDATE: 12/29/17BY: EGB CHK: KMC

DETAIL NAME IF APPLICABLEST0070PE.DWG 7.1.9

ST0070PE – NUCOR CFR™ ROOF HARDWARE

LAST REVISIONDATE: 12/29/16BY: EGB CHK: KMC

DETAIL NAME IF APPLICABLEST0080PE.DWG 7.1.10

ST0080PE – NUCOR CFR™ ROOF HARDWARE

LAST REVISIONDATE: 12/10/14BY: KMC CHK: AES

DETAIL NAME IF APPLICABLEST0090PE.DWG 7.1.11

ST0090PE – NUCOR CFR™ ROOF TAPE MASTIC AND CAULK

LAST REVISIONDATE: 12/10/14BY: KMC CHK: AES

DETAIL NAME IF APPLICABLEV2SSEM0430.DWG 7.1.12

V2SSEM0430 – NUCOR VR16 II™ ROOF HARDWARE

Part No. LSLS-1

16 Gauge SteelPre-Painted Prime GrayFactory Punched Holes

LAST REVISIONDATE: 07/30/12BY: AES CHK:

DETAIL NAME IF APPLICABLEV2SSEM0440.DWG 7.1.13

V2SSEM0440 – NUCOR VR16 II™ ROOF HARDWARE

Width = 1-1/2"Thickness = 1/8"

(5) Strips Per SheetProtective Paper Backing

Part Number

16 Gauge SteelGalvanized

RAKE ANGLE

16 Gauge SteelGalvanizedFactory Punched Holes

Short-H2041Tall-H2051

Length = 20'-0"Width = 3"Height = 5"

16 Gauge SteelGalvanized

VR16-II CLIP

8" PRE-CUT MASTIC

LAST REVISIONDATE: 06/15/18BY: KMC CHK: AES

DETAIL NAME IF APPLICABLEVSSEM0450.DWG 7.1.14

VSSEM0450 – NUCOR VR16 II™ ROOF TAPE MASTIC AND CAULK

LAST REVISIONDATE: 12/29/17BY: EGB CHK: KMC

DETAIL NAME IF APPLICABLEST0100PE.DWG 7.1.15

ST0100PE – FASTENERS