Pro Catalog Final

8/9/2019 Pro Catalog Final

1/12

1

..c | 800-544-1307

Professional Chimney sweePProduCts

800-544-1307

August West and Rutlandbring TLC to chimney sweeps!Introducing one system to usewith all our proessional products.


2/12

2

e qck cc cpg.

dg b k c p,

c tlC!

We have listened to professional chimney sweeps and

we have designed the easiest and most reliable connector

system available anywhere. It will save time and frustration.

O ym to use with all of our professional products.

Eliminate the need for multiple adapters.

U wh:

Fiberglass rods

ProFlex rods

ProKleen rods

Adapters to use with 3/8, ProFlex, ProKleen

Master Sweep brushes

Professionals Choice brushes

Sweepsall brushes

Duct cleaning brushes

August West tools

Wizard rotary loop

Tile breakers

Chain creosote remover

new torQue


3/12

3

..c | 800-544-1307

lk t bg c pc

tq lck Cc.

by August West

Recessed Button

Beveled Hole

> Just push them together and they snap into place!> An easy squeeze and they unlock, even with gloves on> Button recessed to avoid unexpected disconnects> Tongue and groove feature lessens the torque on the pushbutton

We are listening.Please give us your eedback.Call 800-544-1307 ore-mail [email protected].

oCK system


4/12

Professiona4

a

B

C

fiBerGlass eXtension rods(a) Heavy Duty commercial grade rods 0.440 diameter, blackAvailable with 3/8 threading or torque lock connector.

3/8 Thread TLC59F-4 59FT-4 25/cs

50F-5 59FT-5 25/cs

59F-6 59FT-6 25/cs

(B) Super Duty commercial grade rods 0.480 diameter, yellowAvailable with 3/8 threading or torque lock connector.

3/8 Thread TLC60X-6 60XT-6 10/cs

ProfleX rods(C) Because of their superior exibility, ProFlex Rods are the tools

of choice for cleaning from below and when going through sharp

bends, osets, breeches or thimbles. They can be maneuveredwhere others fail to reach. Rods are available in two sizes: 3/4

diameter or 7/8 diameter. Due to demand we have added a 3 rod

with 7/8 diameter. Where optimum exibility is essential, start with

the 3/4 diameter and add sections of the stier 7/8 diameter rods.

Rods come in coarse threading or TLC.

CoarseThreading TLCPF-34-3 PFT-34-3 3/4 dia, 3 long 10/cs

PF-78-3 PFT-78-3 7/8 dia, 3 long 10/cs NEW!

PF-78-5 PFT-78-5 7/8 dia, 5 long 10/cs

ProKleen rods

These steel rods are ideal for use with a electric drill with tools tobreak out clay ue tiles or to remove creosote with our rotary loop

or chain tool. They are 1/4 diameter and have the original snap-lock

tting or the new torque lock connector (TLC). Both can be rotated

in either direction without separation. Starter rod with the torque

lock connector is hexagonal.

Snap lock TLC 57ST-2 2 starter rod 10/cs(d) 57S-10 57ST-10 10 starter rod 10/cs

(e) 57S-25 57ST-25 2 1/2' 10/cs

57S-50 57ST-50 5 10/cs

Pellet stoVe rod(f)These exible rods are designed to easily maneuver through 30

and 45 osets. White nylon rods are 0.3125 dia. Fitting is 5/6-18 and

designed to t brushes 16126 and 16128.16112 4 6/cs

adaPters14FTF 1/4" female/TLC female 6/cs

(G) 38FTF 3/8 female/TLC female 6/cs

(h) 38MTM 3/8 male/TLC male 6/cs

(i) PFMTF ProFlex male/TLC female 6/cs

PFFTM ProFlex female/TLC male 6/cs

PKMTF ProKleen male/TLC female 6/cs

PKFTM ProKleen female/TLC male 6/cs

(J) PF-1770 Proex female and 3/8 female 6/cs

(K) PF-1780 Proex male/3/8 female 6/cs

(l) 57S-CM ProKleen male coupling w/o locknut 1/cs(m) WRL-ADP1 ProFlex Loop Adapter 1/cs

WRL-ADPT TLC Loop Adapter 1/cs

rod Caddy(n) Constructed of heavy duty nylon fabric, this convenient carrying

case was developed for the professional chimney sweep. It has a

special pouch for three foot rods, a pocket for smaller items, and two

snap rings for ashlights, etc. It can carry ProFlex, ProKleen or

berglass rods.

AWS-850 1/cs

h i

J K l m

n

e

f

G

Look for a T added to our traditional numbering system to indicate products with the new Torque Lock Connector.

d


5/12

ProduCts5

..c | 800-544-1307

master sweePChimney BrushMaster Sweep is the

premier chimney brushthat has set the industry

standard. This long

lasting professional brush

withstands the demanding

use of busy chimney sweeps. Master Sweep is the brush to

clean chimneys more thoroughly while outlasting all others.

It has a heavy duty double spiral 0.177 dia. spindle design

and 7 of ll of two on two high density oil tempered 22

gauge 0.0286 wire bristles, creating uniform rugged bristle

distribution. Available with 3/8 threading or the new Torque

Lock Connector (TLC).

3/8 NPT TLC(o) MS-5 MST-5 5 round 1/cs

MS-6 (P) MST-6 6 round 1/csMS-7 MST-7 7 round 1/cs

MS-8 MST-8 8 round 1/cs






MS-66 MST-66 6 square 1/cs








(Q) MS-610 6 x 10 1/cs

MS-711 MST-711 7 x 11 1/cs

MS-812 MST-812 8 x 12 1/cs

MS-913 MST-913 9 x 13 1/cs

MS-1014 MST-1014 10 x 14 1/cs

MS-1115 MST-1115 11 x 15 1/cs

MS-1216 MST-1216 12 x 16 1/cs

P

Q

r

master sweeP flat wire Chimney Brush(r) Master Sweep Flat Wire brushes are made for top-down sweepi

from the roof. They wont spring back to their original shape if they

are jammed past a damper frame. Use with Third Stage Remover(see TSR on page 10) for removing heavy deposits of creosote.

The brush lament is a at wire twisted in an evenly spaced spiral

conguration. This brush has the same spindle construction as the

round wire. 3/8 thread tting or the Torque Lock Connector (TLC).

3/8 NPT TLCMSF-6 MST-6 6 round 1/cs

MSF-77 MSFT-77 7 square 1/cs



MSF-711 MSFT-711 7 x 11 1/cs

MSF-812 MSFT-812 8 x 12 1/cs

MSF-1216 MSFT-1216 12 x 16 1/cs

Master Sweep brushes are available in custom sizes, too

Call 800-544-1308 for a quote.

Professionals ChoiCe wire Brush(s) Professionals Choice are the moderately priced chimney brush

that are rugged enough to stand the everyday demands of a

chimney sweep. The single spiral 0.177 dia. spindle is designed

with a heavy-duty plated 3/8 thread double swaged tting or with

the new Torque Lock Connector (TLC). Wire bristles are high densit

oil tempered 11 gauge 0.0286.

3/8 NPT TLC

PC-6 PCT-6 6 round 6/csPC-8 PCT-8 8 round 6/cs

PC-77 PCT-77 7 square 6/cs

PC-88 PCT-88 8 square 6/cs

PC-812 PCT-812 8 x 12 6/cs

o


6/12

Professiona6

Professionals ChoiCe Poly Brush(a)These professional poly brushes are designed for removing

soot from fossil fuels in coal oil or gas ues where the acids may

deteriorate steel bristles. They are also used in stainless steel ues toprevent scratching. Brushes have .075 poly laments with 7 of ll.

Threading is 3/8 NPT or the new Torque Lock Connector (TLC).

3/8 NPT TLC PB-5 PBT-5 5 round 6/cs

PB-6 PBT-6 6 round 6/cs

PB-7 7 round 6/cs

(B) PB-8 PBT-8 8 round 6/cs

PB-9 9 round 4/cs

PB-10 PBT-10 10 round 4/cs

Professionals ChoiCe Pre-faB Brush(C)These poly brushes are designed for easier maneuvering in

prefabs with .050 Prostran polypropylene laments and 6 of ll.They may be used for bottom up cleaning of zero clearance ues.

Threading is 3/8 NPT or Torque Lock Connector.

3/8 NPT TLC

PB-6P50 PBT-6P50 6 round 4/cs

PB-8P50 PBT-8P50 8 round 4/cs

Ba

dC

sweePsall Brush(d) SweepsAll Brushes have tough acid resistant bristles for use on

wood, coal, oil or gas ues. The brushes are especially suited to

cleaning oset chimneys and ues relined with exible pipe wherecreosote is not a problem. Soft oppy bristles allow the brush,

regardless of size, to t most standard ues and will not damage or

score liners. We oer both coarse threading or the new Torque Lock

Connector (TLC).

CoarseThreading TLCPF-8 PFT-8 1/cs

PF-12 PFT-12 1/cs

PF-16 PFT-16 1/cs

duCt CleaninG Brushes(e) Our duct cleaning brushes are designed for cleaning air ducts

or other applications where a vigorous scrubbing action is notrequired. The oppy polypropylene bristles provide a gentle action

that dislodges build-up in duct systems, allowing easy removal with a

vacuum. Duct cleaning brushes made with 3/8 NPT thread tting or

TLC for use with heavy duty berglass rods.

38 NPT TLCPBX-12 PBXT-12 12 round 1/cs

PBX-16 PBXT-16 16 round 1/cs

PBX-24 PBXT-24 24 round 1/cs

CyClone smoKe ChamBer Brush(f)This is an excellent brush for cleaning smoke chambers.

The bristles are 11 long and when used with a drill and rod

system, they spread out and clean eciently. It has the newTorque Lock Connector.

227T 6/cs NEW!

Pellet stoVe Brushes(G) An aggressive brush for cleaning pellet stoves and dryer vents.

These brushes are designed to navigate a sharp turning radius

without getting caught in elbows and osets. Bristles are 0.020 poly

and threading is 5/16-18. Use rod #16112.

16126 3 4/cs

16128 4 4/cs

fe G

Look for a T added to our traditional numbering system to indicate products with the new Torque Lock Connector.


7/12

ProduCts7

..c | 800-544-1307

mb d

(h) Used for sweeping up piles of ashes and creosote that

collect on the hearth. Black Tampico with 8 bristle ll.

728 12/cs

sk s B(i)The 16 long brush is used for cleaning the smoke shelf and

replace. Made of corrosive resistant poly bristles 2 long.

805LH 12/cs

u-B(J) Made with sti wire bristles for heavy creosote found in the

smoke chamber. Threaded with NPT to t berglass rods.

47N-H-2 6/cs

w d B(K) Use for cleaning nooks, crannies and awkward corners.

Made with wire bristles.

204-H 12/cs

h iJ

l

m

n BGood for hard to reach places such as smoke chambers, dampers o

pellet stove heat exchangers. The construction of the shaft allows

to be bent and then straightened out again.

2-1/2 bristles(l) 137F-25 Short 17 12/cs

(m) 136F-25 Long 27 12/cs

w scc B(n) For cleaning soot and creosote. It has 3 rows of

wire bristles and curved handle.

202-H 12/cs

sk Cb B(o) Excellent for cleaning the smoke chamber due to its bent

construction and 24 length. It has heavy duty bers.

226 1/cs

K

n

o

hand Brushes for Chimney sweePs


8/12

Professional8

auGust west sweePers

auGust west sootsweePer ii The most powerful vacuum for controlling dust!

Exchanges all the air in an average room in 2 minutes

Moves air 7 to 10 times more eectively than an industrial vacuum

The lter hold the smallest particles and has a huge capacity

(a) SootSweeper II is the only vacuum on the market made solelyfor chimney sweeps to control dust. When the big 4 diameter hose

is placed inside a replace and the switch is turned on, all the air in

the replace is drawn into the machine. Air from the room rushes

into the replace to ll the vacuum created and due to the natural

draft of the chimney air cannot come down the shaft. All the clouds

of dust the cleaning creates just swirl around for a few seconds and

then disappear into the SootSweeper hose. Two year warranty on the

motor, one year on the remaining parts.

turBosweePer Perfect companion to the SootSweeper II

Picks up large chunks as well as small soot particles.

Use in oil and gas ues, smoke shelves, and in reboxes

(B) It is engineered to take the abuse from constant daily use. The

high-density polyethylene body is compact and is dent and rustproof. The crush-proof 1-1/2 vinyl hose is a generous 10 long with

molded vinyl cus. The supplemental 7/8 x 4 metal hose attaches

to reach those annoying soot-lled crevasses and cracks. The hose

has positive-locking tting that smoothly swivels 360. The motor

will not overheat if there is any blockage. The three latches are wide,

which gives them long lasting strength and they seal the motor head

securely to prevent dust from escaping. Five year warranty on the

tank, two years on the motor and one year on the remaining parts.

a B

Specifcations:

Dimensions: 40 H x 20 W

Weight: 85 lbs.Hose: 4 x 10

Motor: 2 H.P. Single Phase, 15 v,

115 amps, 7500 RPM

Fan: 100 MPH wind load, 350

CFM, 8,000 ft per

minute air velocity

Filter: 30,528 sq. in., pleated, non-

woven,

precharged, 99.9% ecient

on particles as

small as 0.5 microns

AWS-825 1/cs (Shipped in two boxes)

Specifcations:

Dimensions: 26 H x 16 diameter

Weight: 27 lbs.Hose: 1-1/2 x 10 vinyl and 7/8

x 4 metal

Motor: 1 HP, self-cooling

Lift 86

Tank: 6 gallon, high-density

polyethylene

Filter: Dacron bag prelters,

capturing particles as

small as 5 microns. The

pancake lter provides

greater ltration.

AWS-700 1/cs


9/12

ProduCts9

..c | 800-544-13

ssp f(C)This long life lter has a surface area that lters particles as small

as .5 microns to return clean air to a room. It has been pre-charged

with a very ne powder which improves the vacuums ability to

lter sub-micron particles. With proper care and cleaning an August

West lter will provide hundreds of cleanings and satisfactory

performance. Note: The SootSweeper is a dust collector and must

not be used as a vacuum. Vacuuming debris can cause the lter

membrane to be punctured and hot ashes will burn holes in the

membrane. Either situation is a job-ending problem since the

integrity of the lter membrane has been destroyed thus

allowing large amounts of dust or soot to pass through to theoutside environment.

Filter for older SootSweeper I model, measures 13 dia. x 26 highAWS-813 1/cs

Filter for SootSweeper II model, measures 14 dia x 18 highAWS-812 1/cs

s d f(d)The Sentinal lters dust and soot particles as small as 1 micron

without restricting air ow. Combined with the SootSweeperss main

lter, chimney sweeps can work with the utmost condence.

AWS-211F-K 5/cs

tbsp f(e) Pancake lter with gasket, 16 diameter. This is the inner lter for

the TurboSweeper.

AWS-703 1/cs

dc bgThis prelters the material and does not cake up.

Material easily releases from it by gently shaking or brushing

with a soft bristle brush.

AWS-704 1/cs

NOTE: Replacement parts for both vacuums are available.

For a listing of replacement parts, go to www.rutland.com.

r lp(f) Patented rotary action safely and eectively removes thin layers

of accumulated glazed creosote and crust. Its loops wipe the side

and corners of clay ue tiles to remove build-up. It gets down to th

liner in minutes. And also roughens heavier concentrations of surfa

glaze for faster penetration of Third Stage Creosote Remover (TSR).

14 loop cleans up to 9 x 9 or 7 x 11. The 24 loop cleans up to

16 x 16 or 12 x 16.

WRL-100 Wizard assembly w/14 loop,

& Drill Adapter (WRL-ADP2) Fits ProFlex rods 1/cs

WRL-100RK Wizard assembly w/ 14 loop,

Fits ProKleen rods 1/csWRL-100T Wizard assembly w/14 loop,

Fits rods with Torque Lock Connector 1/cs

WRL-14 14 Replacement Loop 5/cs

WRL-24 24 Replacement Loop 5/cs

C rv c p(G) Consists of three steel chains mounted with quick links to a

center ange. Quick links allow simple and easy chain adjustment

accommodate various ue sizes. The chains spin out to chip away

third degree creosote glaze without damaging sound tiles. This too

can be used from either the top or bottom of the ue. Use only on

masonry tiles.

ProKleen TLC

WTB-16 WTBT-16 4/cs

t Bk

These weighted tools spin in eccentric circles to break out clay ue

tiles quickly and eciently. Attach to steel rods powered by a

electric drill.

ProKleen TLC(h) WTB-44 WTBT-44 Small 4/cs

(i) WTB-46 WTBT-46 Large 1/cs

(J) WTB-44HD WTBT-44HD Double 1/cs

wiZard systemauGust west filters

G

h

f

i J

dC

e


10/12

Professional10

sk C(e) Formulated specically to neutralize smoke odors from replaces,

chimneys, fuels oils and re damage. It does not mask odors, itneutralizes them. A quart of concentrate makes one gallon when

mixed with water. Use in a spray bottle or for larger jobs, use a

standard garden type sprayer.

AW-5012 16 . oz. 6/cs

C s m C(f) A concentrated environmentally friendly cleaner that removes

dirt, eorescence and stains, including creosote build up on brick,

block or stone chimneys. Combats acid rain. Neutralizes acid build

up caused by muriatic acid or other acid cleaners. For light build

up mix 2 parts water to 1 part Masonry Cleaner or for average to

heavy build up use one to one ratio. Apply a diluted solution to a

dampened area with low pressure sprayer or brush. Scrub vigorouslyand thoroughly rinse the cleaned surface with water.

1PC 1 gal 1/cs

C s w rpFor use on vertical surfaces. Our Chimney Shield system guarantees

a decade of protection to prevent spalling, free/thaw damage and

deterioration of masonry surfaces. One application forms a barrier

against water, yet it allows the water vapor to escape.

Non-ammable, transparent, water-based formulation works on most

masonry surfaces. Apply with a low pressure sprayer to either damp

or dry surfaces after proper cleaning with Chimney Shield Masonry

Cleaner.

(G)5CS 5 Gal. 1/ea(h) 25CS 2.5 Gal. 2/cs

Chimney rePair

C m Pc(i) A patching cement for exterior use in repairing broken mortar

in chimneys, steps, sills, sidewalks, or foundations. It dries to a hard,

tough, weather-resistant nish in a natural concrete color. It skins

over in a few minutes and cures in one day or more, depending on

thickness of patch.

89 10.3 oz. 12/cs

sg o - C rv(a) Specially formulated powder for use in pre-fab chimneys.

Powerful ingredients combine with ue gasses to change thechemical composition of creosote into an easily removed, dry aky

compound. It is nonpolluting, nonammable, noncorrosive and can

be used in wood burning replaces, stoves, furnaces and boilers.

AW-2012 2 lbs. 12/cs

sg t C rv(B) Liquid preventative that reduces build up of third state creosote

caused by incomplete combustion in wood burning stoves and

replaces. The active catalyst, introduced into the combustion

process, transforms deposits into brushable soot. Regular

applications will greatly reduce the chances of a dangerous

chimney re.

AW-1006 32 . oz. 6/cs

tsr t s C rv(C)TSR dissolves baked on creosote glaze and reduces baked on

resins to loose, brushable soot without requiring heat. Buildup

must rst be brushed with a properly sized at wire brush. An

even application of TSR begins the process of breaking down the

glaze buildup and it must be completely dry before nal brushing

with a at wire brush. When the ue is clean, apply Stage Two as a

neutralizer. For Professional Chimney Sweep use only.

AW-4012 32 . oz. 12/cs

C & B

(d) A spray-on liquid to remove creosote, dirt and stains frommasonry and glass without hard rubbing. It is nonabrasive,

nonammable, clings to vertical surfaces and will not scratch.

For professional use only.

AW-3012 16 . oz. 12/cs

B dC e fa

auGust west ChemiCals Chimney shield

hG

For additional chemicals, request a copy of the Rutland catalog or go to our website www.rutland.com.

i


11/12

ProduCts11

..c | 800-544-13

a c c b

Wire

Poly

Round

Square

Rectangle

Coarse

3/8"NPT

5/16-20

Availablewith

TorqueLock

TorqueLockItem

Number

3/8"NPT

5/16-20

Coarse

Snap

Lock

Length

Availablewith

TorqueLock

TorqueLockItem

Number

RODS

BRUSHES

PC-6 X X X X PCT-6 59F-4 X 4' X 59FT-4

PC-8 X X X X PCT-8 59F-5 X 5' X 59FT-5

PC-77 X X X X PCT-77 59F-6 X 6' X 59FT-6

PC-88 X X X X PCT-88 60X-6 X 6' X 60XT-6

PC-812 X X X X PCT-812 16112 X 4'

PB-5 X X X X PBT-5 PF-34-3 X 3' X PFT-34-3

PB-6 X X X X PBT-6 PF-78-3 3' X PFT-78-3

PB-7 X X X PF-78-5 X 5' X PFT-78-5

PB-8 X X X X PBT-8 57S-25 2.5' X 57ST-25

PB-9 X X X 57S-50 5' 57ST-50

PB-10 X X X X PBT-10

PB-6P50 X X X X PBT-6P50

PB-8P50 X X X X PBT-8P50

MS-5 X X X X MST-5MS-6 X X X X MST-6

MS-7 X X X X MST-7

MS-8 X X X X MST-8

MS-9 X X X X MST-9

MS-10 X X X X MST-10








MS-1010 X X X X MST-1010

MS-1111 X X X X MST-1111

MS-1212 X X X X MST-1212

MS-1414 X X X X MST-1414





MS-1014 X X X X MST-1014

MS-1115 X X X X MST-1115

MS-1216 X X X X MST-1216

MSF-6 X X X X MSFT-6







16126 X X

16128 X X

PF-8 PFT-8

PF-12 PFT-12

PF-16 PFT-16

PBX-12 PBXT-12

PBX-16 PBXT-16

PBX-24 PBXT-24

227T

RODS

BRUSHES


12/12

12

Rutland Fire Clay Company

PO Box 340 | Rutland, VT 05701-0340

Phone: 802-775-5519 | Fax: 802-775-5262

[email protected] | www.rutland.com

CALL TOLL - FREE | US & CANADA

800-544-1307

Documents

Pro Catalog Final