Upload
doankhanh
View
213
Download
0
Embed Size (px)
Citation preview
www.prismalence.nl Visual Indicating System
Prismalence projects the light where it is needed.
This is how you safe 50% to 80% in your costs!
Industrial outdoor lighting
STELLA POLARIS
Lower maintenance costs
50 – 80% energy savings
CO2 reduction - lower carbon footprint
Better visibility
Robust water resistant and dust-proof luminaire
Longer lifecycle
Suitable for marine environments
Safer working conditions
Better visibility = higher productivity
Innovative green technology from Sweden:
Cranes and machinery Industrial indoor lighting
SOLLJUS
www.prismalence.nl Visual Indicating System
Stella LED
Technical Specifications
Energy efficient, water and vibration proof LED fixture (IP66) for heavy
duty applications. Powder coated aluminum body and steel bracket.
Electronic ballast in separate water safe casing (IP66). Quick release
between fixture and ballast for fast maintenance. Built in lens protection.
Multiple rectangular light pictures via a patented prismatic lens system.
Extra low glare. The ballast is built with the Safety Extra Low Voltage
(SELV) for enhanced personal safety. LED circuit is protected against
open loop. 2 built dimming modes: 50% and 10-% output through phase
control. LED runs on 2 ballast for fail-safety. Also available with extra
Heavy Duty Bracket and safety chain.
Applications
Container cranes (STS, RMG), high masts, (harbor)cranes, shipyards
and –docks, (heavy) industry, marine environments and (rail) road
terminals.
Technical Data
Mains (input) voltage 220-240 VAC (110 VAC, 24VDC)
Total weight 12 kg fixture incl. of ballast in IP66 casing
Form of protection IP 66, class I
Temp. tolerance +50°C till -30°C
Color temperature 4,200K
Color rendering Ra >70
Lumen efficiency Approx. 100 Lumen/watt
LED life exp. 60,000 hours L80, TM21
Lamp type 120 or 230W LED individual chips
Energy consumption 122 or 232W
Operating position Universal
Start time Instant
Ballast Electronic ballast attached to body
Safety glass Included (prismatic lens)
Light dissemination Several rectangular light pictures depending
on use (15° to 140° dissemination).
Contact us for light calculations.
Order numbers:
SL12013, SL12069m, SL120692, SL120314 (120W)
SL23013, SL23069m, SL230692, SL230314 (230W)
www.prismalence.nl Visual Indicating System
Stella
560
418
378
130 ° 120 °
Area: 0,12m2
Technical Specifications
Energy efficient water and dust protected fixture (IP66) for use with
ceramic metal halogen gas discharge lamp. Powder coated aluminum
body and steel bracket. Tool-less change of light sources and optics.
Degree markings for precision focusing of the light beam. Electronic
ballast in separate water safe casing (IP66). Quick release between
fixture and ballast for fast maintenance. Membrane ventilators to
equalize pressure and for moisture control. Integrated anti glare ring
and lens protection. Rectangular light picture via a patented prismatic
lens system. Easy to rotate optics 90°. Vibration proof.
Use areas
Masts (24-50m), (harbor)cranes, workshops, shipyards and –docks,
(heavy) industry, marine environments, factory halls, (railroad)terminals
and arenas.
Technical Data
Mains (input) voltage 220-240 V
Total weight 9 kg fixture + 4 to 5 kg ballast in IP66 casing
Form of protection IP 66, class II
Temp. tolerance +50°C till -30°C
Color temperature 4200K (3000K optional with 150W)
Color rendering Ra >90
Lumen efficiency 100 -115 Lumen/watt
LOR 0,8 – 0,9 depending on optics
Light-source life exp. 20,000 – 30,000 hours
Lamp type CDM-T 150W, 210W or 315W
Energy consumption 163W, 222W or 327W
Operating position Universal
Lamp seat G12 (150W) or PGZ18 (210W and 315W)
Start time Ca. 3 minutes to full lumen output
Ballast External electronic ballast
Lens Prismatic , antistatic and tempered safety glass
Reflector High quality anodized aluminum, parabolic
Light dissemination Several rectangular light pictures depending
on use (15° to 140° dissemination).
Please contact us for light calculations.
Artikelnummers:
S15013, S15069M, S150692, S150314 (150W)
S21013, S21069M, S210692, S210314 (210W)
S31513, S31569M, S315692, S315314 (315W)
www.prismalence.nl Visual Indicating System
Polaris
Technical Specifications
Energy-efficient water and dust protected fixture (IP66) for use with
ceramic metal halogen gas discharge lamp. Powder coated aluminum
body and bracket. Tool-less change of light sources and optics. Handles
for simple adjustment. Electronic ballast integrated in back
compartment. Membrane ventilators to equalize pressure and for
moisture control. Integrated anti-glare ring and lens protection.
Rectangular light picture via a patented prismatic lens system.
Easy to rotate optics 90°. Vibration proof.
Use areas
Masts (4-24m), (harbor)cranes, workshops, warehouses, mobile
equipment, perimeter lights, (railroad)terminals, heavy industry, marine
environments and architectural lighting.
Technical Data
Mains (input) voltage 220-240 V
Total weight 6 kg fixture
Form of protection IP 66, class I
Temp. tolerance +50°C till -30°C
Color temperature 4200K (optional 3000K)
Color rendering Ra >90
Lumen efficiency 90 Lumen/watt
LOR 0,8 - 0,9 depending on optics
Light-source life exp. 15,000 – 20,000 hours
Lamp type CDM-T/HCI-T/CMH 35W, 70W, 100W or 150W
Energy consumption 44W, 81W, 105W or 167W
Operating position Universal
Lamp seat G12
Start time 10 sec. to 50%; 1 minute to full lumen output
Ballast Internal electronic ballast
Lens Prismatic, antistatic and tempered safety glass
Reflector High quality anodized aluminum, parabolic
Light dissemination Several rectangular light pictures depending
on use (15° to 155° dissemination).
Please contact us for light calculations.
Article numbers:
P03513, P03536, P03569, P035411F, P035314F, P035315 (35W)
P07013, P07036, P07069, P070411F, P070314F, P070315 (70W)
P10013, P10036, P10069, P100411F, P100314F, P100315 (100W)
P15013, P15036, P15069, P150411F, P150314F, P150315 (150W)
318
253
130°
271
336
Area: 0,07m2
www.prismalence.nl Visual Indicating System
SOLLJUS 210-315W
SOLLJUS
The energy-saving and affordable alternative to 400W and 1000W HPI,
and SON luminaires. Often one-on-one exchange possible.
The optical unit (reflector and lens) is dustproof, therefore the luminaire
maintains its high efficiency throughout its entire lifetime.
Use areas
Spaces of 3m to 21m height, such as (factory)halls, warehouses,
distribution centres, storage spaces, workshops, cold stores, garages,
sport centres etc.
Technical Data
Mains (input) voltage 220-240V ~50/60Hz
Weight 7,7 kg
Measurement Height: 360mm; Ø 290mm
Form of protection IP65
Temp. tolerance +50°C t0 -30°C
Colour temperature 4,200K (optional 3,000K)
Colour rendering Ra >90
Lumen efficiency 115-120 Lumen/watt
LOR 0,8 - 0,9 depending on optics
Light-source life exp. 20,000 – 30,000 hours
Lamp type CDM-T MW Elite (Philips)
Operating position Universal
Installation 2x Ø 6mm screw
Lamp seat PGZ 18
Start time Ca. 3 min. until full lumen output
Ballast Electronic (Philips)
Lens Prismatic, dust proof and anti statc lens
(tempered glass)
Reflector Electrolytic galvanized steel; iron phosphated,
epoxy coated (parabolic)
Casing Stainless steel (EN 1.4301)
Press cast aluminium (lamp house)
Light dissemination 105°round (3m-7m height)
90° round (4m-10m height)
60° round (8m-21m height)
3° round (spot)
30x°120° (asymmetrical)
Please contact us for light calculations.
Article numbers:
065 210 (2)4-00 (210W)
065 315 (2)4-00 (315W)
Complies with the European norm EN12464-1; CE-, EMC- and
S-approved. D-certified.
www.prismalence.nl Visual Indicating System
SOLLJUS 35-70-100-150W
SOLLJUS
The energy-saving and affordable alternative to 250W and 400W HPI,
HPL and SON luminaires. Often one-on-one exchange possible.
The optical unit (reflector and lens) is dustproof, therefore the luminaire
maintains its high efficiency throughout its entire lifetime.
Use areas
Spaces of 3m to 21m height, such as (factory)halls, warehouses,
distribution centres, storage spaces, workshops, cold stores, garages,
sport centres etc.
Technical Data
Mains (input) voltage 220-240V ~50/60Hz
Weight 3,7 – 3,9 kg
Measurements Height: 360mm; Ø 290mm
Form of protection IP23 and IP65
Temp. tolerance +50°C to -30°C
Colour temperature 4,200K (optional 3,000K)
Colour rendering Ra >90
Lumen efficiency 98-106 Lumen/watt
LOR 0,8 - 0,9 depending on optics
Light-source life exp. 15,000 hours (Osram)
Lamp type HCI-T (Osram)
Operating position Universal
Installation 2x Ø 6mm screw
Lamp seat G12
Start time Ca. 3 min. until full lumen output
Ballast Electronic (Osram)
Lens Prismatic, dust proof and anti static lens
(tempered glass)
Reflector Electrolytic galvanized steel; iron phosphated,
epoxy coated (parabolic)
Casing Stainless steel (EN 1.4301)
Press cast aluminium (lamp house)
Light dissemination 105°round (3m-7m height)
90° round (4m-10m height)
60° round (8m-21m height)
3° round (spot)
30x°120° (asymmetrical)
Please contact us for light calculations.
Article numbers:
023/065 035 (2)4-00 (35W)
023/065 070 (2)4-00 (70W)
023/065 100 (2)4-00 (100W)
023/065 150 (2)4-00 (150W)
Complies with the European norm EN12464-1; CE-, EMC- and
S-approved. D-certified.
www.prismalence.nl Visual Indicating System
Polaris LED
Technical Specifications
Water and dust protected fixture (IP66) for use with LED. Powder
coated aluminum body and bracket. Tool-less change of light sources
and optics. Handles for simple adjustment. Electronic ballast integrated
in back compartment. Quick release between fixture and mains for fast
maintenance. Membrane ventilators to remove moisture and equalize
pressure. Integrated anti glare ring and lens protection. Rectangular light
picture via a patented prismatic lens system. Modular optical and light-
engine (LED) unit with quick release.
Use areas
Masts (4-24m), (harbor) cranes, workshops, warehouses, mobile
equipment, perimeter lights, stables, railroad terminals, heavy industry,
salty marine environments, greenhouses, zoo and architectural lighting.
Suitable to use for emergency lights together with Central Battery
Systems (CBS) since it can run on DC (as well as AC).
Technical Data
Mains (input) voltage 220-240 VAC or DC
Total weight 7 kg
Form of protection IP 66, class I; D-class, S-class, CE-mark
Temp. tolerance +50°C till -30°C
Color temperature 3000K or 4000K
Color rendering Ra 75-80+
Lumen efficiency 80-90 Lumen/watt
Light-source life exp. 30,000 – 50,000 hours
Lamp type LED 38W
Operating position Universal
Energy consumption 38W
Start time 1 sec. to full lumen output
Ballast Internal electronic ballast
Safety glass Prismatic lens, antistatic
Reflector High quality anodized aluminum, parabolic
Light dissemination Several rectangular light pictures depending
on use (15° to 155° dissemination).
Please contact us for light calculations.
Article numbers:
PL03813, PL03836, PL03869, PL038411, PL038314, PL038315
318
253
130°
271
336
Area: 0,07m2
www.prismalence.nl Visual Indicating System
Mamba LED
Technical specification:
LED-luminaire with patented lens optics. Powder coated aluminum
body. Tool less replacement of ballast for easy service and fitting.
Membrane ventilation. Adjustable bracket for mounting on both
straight posts and arms. Mounting for 60 mm tubes (use insert for 40
mm tube). Rectangular beam via prismatic lens system that also
minimizes glare and light pollution. Meets all street regulations.
Applications:
Road lighting, pedestrian lighting, small and medium motorways,
perimeter lighting, car parks and jogging tracks. Suitable for mounting
on poles 4-10 m tall. Post separation 20m – 60m depending on road
requirements.
.
Technical Data
Mains (input) voltage 220-240 VAC
Total weight 5,2 kg
Form of protection IP 66, class I
Temp. tolerance +50°C till -30°C
Color temperature 4200K
Color rendering Ra 75
Lumen efficiency 105 lumen/Watt
LOR >0.7
Light-source life exp. >50.000 hours.
Life exp. ballast >80.000 hours
Lamp type 36W or 50W LED
Energy consumption 40W, 57W
Operating position Universal
Start time Instant
Ballast Internal electronic ballast
Safety glass Included (prismatic lens).
Light dissemination Rectangular output 30°x140°; 35°x155°
Please contact us for light calculations.
Order nummers:
M036314, M036315 (36W)
M050314, M050315 (50W)
www.prismalence.nl
Cobra
Visual Indicating System
Technical Specifications
Energy-efficient streetlight fixture (IP66) for ceramic metal halogen
gas discharge lamp. Powder coated aluminum body. Tool-less and
quick maintenance. Membrane ventilators to equalize pressure and
for moisture control. Freely adjustable pole mount for 60mm and
40mm poles (top Ø). Use of patented lens system gives choice of 3
rectangular light patterns to cover different distances between poles:
short, standard and long (up to double standard).
Use areas
Can be used for all streetlight applications by combination of different
lenses and wattages. 35W is suitable 4-8m poles, 70W for 8-10m
poles and 100W for 10-12m poles. Will replace 125W-250W Mercury
Vapor and 70W-250W High Pressure Sodium.
Suitable for all climates including corrosive environments such as
sea-side roads and locations.
Technical Data
Mains (input) voltage 220-240 V
Total weight 6,5 kg
Form of protection IP 66, class I
Temp. tolerance +50°C to -30°C
Color temperature 4200K (optional 3000K)
Color rendering Ra >90
Lumen efficiency 90-115 Lumen/watt
LOR 0,7 – 0,9 depending on optics
Light-source life exp. 15,000 – 20,000 hours
Lamp type CDM-T/HCI-T/CMH 35W, 70W or 100W
Energy consumption 44W, 82W or 109W
Operating position Universal
Lamp seat G12
Start time Ca. 3 minutes to full lumen output
Ballast Internal electronic ballast
Lens Prismatic, antistatic and tempered safety glass
Reflector High quality anodized aluminum, parabolic
Light dissemination Several rectangular light pictures depending
on use (90° to 155° dissemination).
Please contact us for light calculations.
Article numbers:
C03569, C035314F, C035315 (35W)
C07069, C070314F, C070315 (70W)
C10069, C100314F, C100315 (100W)
www.prismalence.nl
Arkitekt
Visual Indication System
1335
700
Technical Specifications
Energy-efficient water protected park fixture (IP65) for use with
ceramic metal halogen gas discharge lamp. Powder coated
aluminum body and steel bracket.
Tool-less change of light sources and optics.
Even light spread through multifaceted secondary reflector for
indirect lighting. Sold including cable.
Areas of use
Parks and pedestrian areas, entrance lights, parking areas.
For use with 60mm (top Ø) poles of 3-4.5m height.
Suitable distances are 15-25m.
Technical data
Mains (input) voltage 220-240 V
Total weight 13,5 kg
Form of protection IP 65, class I
Temp. tolerance +50°C till -30°C
Color temperature 4200K (optional 3000K)
Color rendering Ra >90
Lumen output 90-100 Lumen/watt
Light-source life exp. 15,000 – 20,000 hours
Lamp type CDM-T/HCI-T/CMH 35W or 70W
Energy consumption 44W or 82W
Operating position Standing 90°
Lamp seat G12
Start time Ca. 3 min. to full lumen output
Ballast Internal electronic ballast
Reflector High quality anodized aluminum,
parabolic
Light dissemination 360°
Please contact us for light calculations.
Article numbers:
A035360 (35W)
A070360 (70W)