PRICE LIST EFFECTIVE FROM 01-01-2019 HT - Hetaltools2 ht dia th hole grading each/rs. 4. v10 bond for precision grinding of m.s and c.s 300 40 127 ros 190x15 a463,a60 2100-00 350 40

1

HT

PRICE LIST EFFECTIVE FROM 01-01-2019

1. ALUMINIUM OXIDE GRINDING WHEELS “A” FOR GENERAL USE

DIA TH HOLE GRADING EACH/RS.

50 10 7.94 A36, A46 77-0050 25 25.4 A36-Q5-V30 189-0065 25 25.4 A36-Q5-V30 243-0075 13 19.05 A46,60 103-0075 20 19.05 A36,46,60 221-0075 25 31.75 A36,46,60 278-00100 13 19.05 A24,36,46,60 171-00100 13 19.05 A120,Q5,V30 322-00100 20 19.05 A24,36,46,60 193-00100 25 19.05 A24,R5,V6 245-00150 3 31.75 M.F.A. 120 498-00150 6 31.75 A120Q5V30 309-00150 6 31.75 Medium 266-00150 10 31.75 C.M.F.120 500-00150 13 31.75 A24, C.M.F. 330-00150 20 31.75 A24 311-00150 20 31.75 C.M.F. 387-00150 25 31.75 A24,C.M.F. 372-00200 6 31.75 Medium 365-00200 6 31.75 A120,Q5,V30 582-00200 10 31.75 C.M.F. 729-00200 13 31.75 M.F. 504-00200 13 31.75 A24,C. 801-00200 20 31.75 A24,C.M.F. 546-00200 25 31.75 A24,C.M. 560-00200 25 31.75 FINE 585-00250 10/13 31.75 C.M.F. 1124-00250 20 31.75 A24,C.M.F. 1574-00250 25 31.75 A24, C.M. 940-00250 25 31.75 FINE 982-00300 13 31.75 C.M.F. 1643-00300 20 50.8 A24, C.M.F. 2116-00300 25 25.4 L.B., A24 1420-00300 25 25.4 L.B., C.M.F. 1485-00300 25 50.8 A24 1385-00300 25 50.8 FINE C.M. 1420-00

300 40 50.8 A24,R5,V6 1905-00300 40 50.8 C.M.F. 1995-00300 50 50.8 A24,C.M.F. 2750-00350 40 50.8 A24, C.M.F. 4120-00350 50 50.8 C.F. 8516-00350 50 50.8 A24,M 5525-00400 50 50.8 A24,M 6390-00400 50 50.8 C.F. 13671-00400 65 152.4 A24,R5,V6 7525-00450 50 50.8 A24,R5,V6 8385-00

2. ‘C’ FACE TAPER EDGE SAW GR. WHEEL(V30 BOND)

150 6 31.75 FINE 290-00150 10 31.75 FINE 562-00150 13 31.75 FINE 640-00200 6 31.75 FINE 411-00200 8 31.75 FINE 480-00200 10 31.75 FINE 840-00200 13 31.75 FINE 924-00250 6 31.75 FINE 678-00250 8/10 31.75 FINE 793-00250 13 31.75 FINE 1396-00300 10 31.75 C/A60 1019-00300 13 31.75 C/A60 986-00

3. CRANK SHAFT GRINDING WHEEL V10, BOND

600 22.23 152.4 A463-L5-V10 10425-00660 19.05/22.23 152.4 A463-L5-V10 10990-00660 19.05/25.4 203.2 A463-L5-V10 10900-00660 40 203.2 ROLL GRINDING 14780-00711 25.4/19.05 203.2 A463-L5-V10 12850-00762 25.4 203.2 A463-L5-V10 14950-00812.8 25.4 203.2 A463-L-5-V10 21920-00900 38 304.8 A463-L5-V10 42945-00914 25.4 304.8 A463-L5-V10 29768-00660 50 203.2 A463-L5-V10 25830-00

CUMI - BONDED

C = COARSE M=MEDIUM F=FINE EX. = EXTRA FINE

2

HT


4. V10 BOND FOR PRECISION GRINDINGOF M.S AND C.S

300 40 127 ROS 190X15 A463,A60 2100-00350 40 127 ROS 190X15 A463/A60 3525-00400 40 127 ROS 190X15 A60,A463 4585-00400 50 127 ROS 190X15 A60,V10 6855-00450 65 254 ROS 325X10 A463/460 9675-00500 60 254 ROS 325X10 A463,A60 12850-00

5. ALLUMINIUM OXIDE GR. WHEEL ‘DA’FOR M.S. AND C.S.

6 6 3.18 DA60-L3-V10 95-0010 10 3.18 DA60-L3-V10 107-0010 13 3.18 DA60-L3-V10 125-0013 13 3.18,6.35 DA60-L3-V10 73-0016 13 6.35 DA60-L3-V10 125-0016 16/20 6.35 DA60-L3-V10 164-0020 6 6.35 DA60-L3-V10 111-0020 10 6.35 DA60-L3-V10 110-0020 13 6.35 DA60-L3-V10 125-0020 20 6.35 DA60-L3-V10 92-0020 25 6.35 DA60-L3-V10 186-0025 6 6.35 DA60-L3-V10 73-0025 10 6.35 DA60-L3-V10 110-0025 13 6.35 DA60-L3-V10 90-0025 20 6.35 DA60-L3-V10 164-0025 25 6.35 DA60-L3-V10 103-0025 25 10.0,12.7 DA60-L3-V10 106-0032 6 6.35 DA60-L3-V10 110-0032 13 6.35,12.7 DA60-L3-V10 150-0040 6 6.35 DA60-L3-V10 110-0040 13 6.35,12.7 DA60-L3-V10 150-0040 25 6.35,12.7 DA60-L3-V10 217-0040 40 12.7 DA60-L3-V10 258-0050 6 6.35 DA60-L3-V10 78-0050 10 7.94,10 DA60-L3-V10 163-0050 13 6.35,12.7 DA60-L3-V10 184-0050 20 12.7 DA60-L3-V10 217-0050 25 12.7 DA60-L3-V10 275-0065 6 6.35 DA60-L3-V10 169-0065 10 6.35 DA60-L3-V10 189-0065 13 12.7 DA60-L3-V10 217-00150 3/6 31.75 A60-A120-L5 498-00150 13 31.75 A60-K5-V10 322-00

150 13 31.75 A120 614-00150 20 31.75 A60 408-00180 13 31.75 A60-K5 379-00200 13 31.75 A60-K5 497-00200 20 31.75 A46/A60 1040-00200 25 31.75 A60 630-00250 20 76.2 A60 963-00250 25 76.2/31.75 A60-K5 1077-00300 25 76.2 A60-K5 1290-00300 25 127 A60-K5 1405-00300 25 50.8/76.2/101.6 A463/A60 2604-00300 80 140 A60-L5 3585-00300 50 127 A60 4767-00350 25 127 A60-L5 2730-00350 40 127 A463/A60 3525-00350 50 127 A60N5V10 4730-00350 100 127 A463/A60 7435-00350 100 152.4 A463/A60 7115-00350 150 127 A60-L5 12125-00400 25 127 A463/A60 6100-00400 40 127 A60-L5 4570-00500 50 254 A60-L5 8700-00500 150 304.8 A463/A60 21770-00500 200 304.8 A60 29845-00

6. DISH WHEELS (TYPE 12) ‘A’ V 10 BOND150 12.7 31.75 A60-K5-V10 341-00

7. STRAIGHT CUP WHEELS (TYPE 60 ‘A’V10 BOND

20 20 6.35 DA60-L3-V10 95-0025 25 6.35 DA60-L5-V10 208-0040 25 12.7 DA60-L5-V10 212-0040 40 12.7 DA60-L5-V10 294-0050 50 12.7 DA60-L5-V10 410-0050 25/40 12.7 DA60-L5-V10 305-0076.2 40 19.05 A46/54/A60 378-00100 50 31.75 A46/54 385-00125 100 31.75 A46 924-00150 100 31.75 A46/54 1128-00200 100 31.75 A46/54 1605-00

8. TAPER CUP WHEELS (TYPE 11)’A’ V10 BOND76.2 38.1 31.75 A46/54/60 378-0088.9 38.1 31.75 A46/54/60 468-00101.638.1 31.75 A46/54/60 653-00101.650.8 31.75 A46/54 383-00

CUMI - BONDED

3

HT

CUMI - BONDEDDIA TH HOLE GRADING EACH/RS.

9. WHITE ALUMINIUM OXIDE “AA”GRINDING WHEELS FOR H.S. STEEL

10 10 3.18 AA60-K5-V8 103-0010 13 3.18 AA60-K5-V8 117-0013 13 3.18,6.35 AA60-K5-V8 117-0016 13 6.35 AA60-K5-V8 117-0016 16/20 6.35 AA60-K5-V8 188-0020 6 6.35 AA60-K5-V8 99-0020 13 6.35 AA60-K5-V8 117-0020 20/25 6.35 AA60-K5-V8 151-0025 6 6.35 AA60-K5-V8 99-0025 10/13 6.35 AA60-K5-V8 117-0025 25 6.35 AA60-K5-V8 111-0032 6 6.35 AA60-K5-V8 104-0032 13 6.35 AA60-K5-V8 137-0040 6 6.35 AA60-K5-V8 104-0040 13 6.35 AA60-K5-V8 137-0040 25 6.35 AA60-K5-V8 225-0040 40 6.35 AA60-K5-V8 267-0050 6 6.35 AA60-K5-V8 141-0050 13 12.7 AA60-K5-V8 187-0050 20 12.7 AA60-K5-V8 224-0050 25 12.7 AA60-K5-V8 290-0065 13 12.7 AA60-K5-V8 224-0065 25 12.7 AA60-K5-V8 309-0075 6 12.7 AA60-K5-V8 205-0075 13 12.7 AA60-K5-V8 242-00100 13 19.05/31.75 AA60-K5-V8 256-00100 20 19.05 AA46/54,60,120 530-00150 3 31.75 AA60,120 698-00150 6 31.75 AA120 406-00150 6 31.75 AA60 311-00150 6 31.75 AA220 832-00150 6 31.75 AA400 1289-00150 10 31.75 AA220 906-00150 10 31.75 AA320/400 1404-00150 13 31.75 AA46/54,60 368-00150 13 31.75 AA120 443-00150 13 31.75 AA220 1143-00150 20 31.75 AA60 435-00150 20 31.75 AA46/54 948-00150 20 31.75 AA120 1027-00150 25 31.75 AA46/54,60 1119-00180 6 31.75 AA60 442-00180 13 31.75 AA46/54,60 435-00

180 13 31.75 AA80/120 567-00200 6 31.75 AA60 430-00200 6 31.75 AA120 1328-00200 10 31.75 AA320/400 2835-00200 13 31.75 AA46/54,60 530-00200 13 31.75 AA120 1701-00200 20 31.75 AA46/54,60 645-00200 20 50.8 AA46/54,60 675-00200 25 31.75 AA46/54,60 787-00230 25 96 AA46/60,80 3339-00250 20 76.2 AA60 1748-00250 25 31.75/50.8 AA46/54,60 3434-00250 25 76.2 AA46/54,60 1910-00250 25 150 AA46/60 4030-00300 25 76.2/127 AA60-AA46/54 5082-00300 40 50.8/76.2 AA60-AA46/54 6006-00300 40 127 AA60(ROS) 4090-00300 50 76.2/127 AA46/54,60/RBS 9177-00350 25 127 AA60 9639-00350 40 127 AA60/46 10133-00350 50 127 AA46/60 13380-00400 25 127/152 AA60 8846-00400 40 127/152 AA60 12012-00400 50 127 AA60 15981-00

10. DISH WHEEL (TYPE-12) ‘AA’ BOND “RAA”

101.6 12.7 19.05 AA60-K5-V8 303-00152.4 12.7 31.75 AA46/54,60 474-00152.4 12.7 31.75 RAA46/60-K-6-V-206 550-00

11. STRAIGT CUP WHEEL (TYPE-6) WHITE ‘AA’ BOND

20 20 6.35 AA60-K5-V8 202-0025 25 6.35 AA60-K5-V8 109-0040 40 12.7 AA60-K5-V8 306-0050 25 12.7 AA60-K5-V8 382-0050 40 12.7 AA60-K5-V8 382-0050 50 12.7 AA60-K5-V8 480-0075 40 12.7 AA60-K5-V8 535-00100 50 31.75 AA60-46/54 569-00125 100 31.75 AA46/54-K5 1333-00150 100 31.75 AA60/46-54 1640-00200 100 31.75 AA46/54-K5 2615-00250 100 31.75 AA60 13125-00

12. TAPER CUP WHEELS (TYPE-11) AA

76.2 38.1 19.05 AA60-K5-V8 537-0088.9 38.1 31.75 AA46/54,60 309-00101.6 38.1 31.75 AA46/54,60 498-00101.6 50 31.75 AA46/54,60 569-00

4

HT


13. PINK ALUMINIUM OXIDE “RAA”GRINDING WHEELS FOR H.S. STEEL

150 6 31.75 RAA60-K5-V206 335-00150 13 31.75 RAA46/60-K5-V206 392-00180 13 31.75 RAA46/60-K5-V206 466-00200 13 31.75 RAA46/60-K5-V206 567-00200 20 31.75 RAA46/60-K5-V206 718-00

14.STRAIGT AND TAPER CUP WHEELPINK TYPE-6/TYPE-11

100 50 31.75 RAA46/60-K5-V206 628-00100 38 31.75 RAA46/60-K5-V206 493-00

15.VITRFIED SEGMENTS150 80 25 AA24,36,46 424-00

16. GREEN SILICON CARBIDE WHEEL ‘VG’ BOND (GC)

150 3/6 31.75 GC60-120 1120-00150 13 31.75 GC60 684-00150 13 31.75 GC120 752-00150 20 31.75 GC60-120 751-00150 25 31.75 GC60-120 888-00180 13 31.75 GC60 715-00200 20 31.75 GC60-120 1252-00200 25 31.75 GC100-46 1419-00200 25 31.75 GC60-80-120 1346-00250 25 31.75 GC60-80 2549-00250 25 31.75 GC120 3050-00300 25 50.8 GC60 3980-00300 25 50.8 GC120-80-L.B 4497-00300 40 50.8 GC60 5520-00300 40 50.8 GC120 10196-00

17. GREEN BLACK SILICON CARBIDE “CGC” BOND

150 6 31.75 Tip G-120 536-00150 13 31.75 Tip G-60 667-00150 13 31.75 Tip G-120 735-00150 20 31.75 CGC60,80 556-00150 25 31.75 CGC60 654-00200 20 31.75 CGC60 833-00200 25 31.75 CGC60,80,100,120883-00250 25 31.75 CGC60-80 2014-00300 40 50.08 CGC60 4189-00

18. SILICON CARBIDE WHEEL (VVR-VG)FOR LOW TENSTLE100 25 NOBORE C60 272-00150 20 31.75 C24-S5-VVR 600-00150 25 31.75 C24-S5-VVR 729-00300 25 101.4 C463,L5VG 3030-00300 40 50.8 C24,36 7130-00350 40 101.6 C463,L5,VG 7160-00350 100 152.4 C463-L5 15350-00

19.REINFORCED CUT-OFF WHEELS65 2.5 10 A46 65-00100 3 12.7/16 A24-R5-BFW 110-00125 3 22.23 A24-R5-BFW 123-00180 3/4 22.23 A24-R5-BFW 142-00230 3 22.23 A24-R5-BFW 277-00230 5/7 22.23/15.88 FOUNDRY WHEEL297-00300 3 25.4 A24-R5-BFW 544-00350 3 25.4 A24-R5-BFW 645-00400 3/4 25.4 A24-R5-BFW 958-00500 5 40 A30-R5-BFW 1400-00105 1/1.5 16 Sleek 38-00105 2 16 Sleek 40-00105 1 16 TEZZ 27-00105 1 16 DYNOZ 15-00100 3 12.7/16 SAMURAI 56-00125 1 22.23 TEZZ 40-00125 3 22.23 SAMURAI 80-00180 3 22.23 GUN/SAMURAI 107-00180 3/4 22.23 A24SPARK 131-00230 3 22.23 A24SPARK 247-00300 3 25.4 A24SPARK 476-00350 3 25.4 A24-A30SPARK 574-00400 3/4 25.4 A24-A30SPARK 800-00

20. PLAIN CUT OFF WHEELS ALU. OXIDE100 1.5/0.8 12.7 A80-PBN 101-00100 3 12.7 A80-PBN 87-00150 0.8/1 31.75 A60,A80,PBN 124-00150 1.5 31.75 A60-PBN 75-00150 3 31.75 A60-PBN 129-00200 1.5 31.75 A60-PBN 96-00300 3 25.4 CHOPSAW 180-00350 3 25.4 CHOPSAW/HICUT194-00350 3 25.4 TEZZ/GREEN 194-00

21. RESINOID BONDED WHEELS50 10 10.7.94 A46,R5-BM4 110-00100 20 15.88-12.7 A163-R2-BM4 198-00150 13 15.88 A163-R2-BM4 288-00150 25 15.88 A163-R2-BM4 360-00200 25 15.88 A163-R2-BM4 726-00

CUMI - BONDED

5

HT

DIA TH HOLE GRADING EACH/RS.300 25 25.4 A163-R2-BM42 2084-00300 40 31.75/38 A163-R2-BM4 1924-00300 40 31.75/38 A163 SAMURAI 1639-00300 40 31.75/38 A145 SAMURAI 1639-00400 50 152.4 HI-TECH 13995-00400 65 152.4 A163-R2-BM4 5270-00400 65 152.4 A145 4788-00200 10 31.75 A60PBNX 345-0022.DEPRESSED CENTRE WHEELS (D.C.)100 4 16 A36 HICUT 94-00100 4 16 SAMURAI 44-00100 6 16 A36 HICUT 107-00100 6 16 SAMURAI 56-00125 5/7 22.23 HICUT A36 155-00125 5/6 22.23 SAMURAI 93-00180 5/7 22.23 HICUT 165-00180 5/7 22.23 AGNI 162-00180 6 22.23 SAMURAI 138-00180 7 22.23 SLEEK PLATINUM 142-00180 7 22.23 SLEEK UNIVERSAL 142-00180 7 22.23 CUMIFLEX ZIRCON 318-00230 7 22.23 AGNI 270-00230 7 22.23 HICUT 303-00230 6.7 22.23 SAMURAI 190-0023.CONTROL WHEEL200 80 75 A-80-RR,RBS(120X10MM) 5792-00230 100 76.2 RUBBER BOND 7277-00230 150 76.2 RUBBER BOND 13114-00300 150 127 RUBBER BOND 23199-0024.DRESSING STICK SQURE EACH150X25 C-20,55,VVR 140-0025.ALLUMINIUM OXIDE MOUNTED POINTS

‘A’ SERIES-COARES OR MEDIUMA-1 A-2 A-3 A-4 A-5 EACH63 41 82 43 39

A-11 A-12 A-13 A-14 A-15 A-2149 36 39 36 32 34

A-24 A-25 A-26 A-31 A-32 A-3429 33 36 45 36 41

A-36 A-37 A-38 A-39 A-4045 36 40 40 50

28.SILICON CARBIDE FINISHED STICKSIZE SQ TRI HRD. RD. PER100X6 48-00 60-00 60-00 68-00 EACH100X10 48-00 60-00 60-00 68-00 EACH100X13 48-00 60-00 60-00 68-00 EACH150X6 68-00 75-00 80-00 85-00 EACH150X10 74-00 80-00 80-00 85-00 EACH150X13 75-00 75-00 80-00 90-00 EACH150X20 150-00 150-00 150-00 150-00 EACH150X25 170-00 170-00 170-00 170-00 EACH

29. LIST NO 57 FILES C. M.F. 340-00 EACHLIST NO 814 C. M. EXC. C100 151-00 EACHLIST NO 814 C 100/46/60/80 151-00 EACHLIST NO 814 FINE 172-00 EACHLIST NO 814 EX. FINE 190-00 EACHLIST NO 222 EXC.C.M 175-00 EACHLIST NO 222 FINE 195-00 EACHLIST NO 222 EX. FINE 217-00 EACHLIST NO 109 150X50X25 190-00 EACHLIST NO 108 200X50X25 320-00 EACHLIST NO 360-400 GMS EXC C/M/F 245-00 EACHLIST NO 276-50 GMS 65-00 EACH

Experience and knowledgewithin a world-wide group

26.TORRSTEEL MOUNTED POINT13MM 16MM 20MM 30MM 40MM 50MM26 28 28 31 41 62

27.‘W’ SERIES MOUNTED POINTW-144 W-146 W-152 W-153 W-154 W-16023 23 23 23 23 23

W-162 W-163 W-164 W-170 W-174 W-17523 23 23 25 25 25

W-176 W-177 W-178 W-179 W-185 W-18625 25 31 33 34 35

W-187 W-188 W-195 W-196 W-197 W-20536 41 36 37 44 38

W-208 W-215 W-220 W-225 W-227 W-33549 36 38 29 31 41

W-23644

CUMI - BONDED

“B”Series Mounted point35

EACH

6

7

HT

CUMI - COATEDPRICE LIST EFFECTIVE FROM 01-06-2019

(1) EMERY CLOTH SHEETS “AJAX” BRAND BLUE DRILL (230x280)Grit Ex-Coarse Coarse Medium Fine Ex-Fine Sup.Fine

500 Nos. 14335-00 11090-00 10370-00 9880-00 9850-00 10750-001PCS. 30-00 26-00 25-00 24-00 25-00 24-00(2) EMERY CLOTH SHEETS (CANNON BRAND) PLAIN WEAVE (230x280)

36-40 50-60 80-100-120 150-180-220Grit Coarse Medium Fine Ex-Fine500 Nos. 8615-00 8100-00 7685-00 7220-00(3) WATER PROOF PAPER SILICON CARBIDE “AJAX” BRAND (230x280)Grit 80 100 120 150 180 220

500 Nos. 11270-00 10050-00 9775-00 8615-00 8950-00 7970-001 PCS. 25-00 24-00 23-00 23-00 22-00 20-00Grit 240-280 320-400 500 600-800-1000 1200-1500-2000500 Nos. 8650-00 7800-00 8680-00 8980-00 9880-001 PCS. 21-00 20-00 20-00 22-00 30-00(4) ALOXITE CLOTH SHEETS HERMES SIC W.P.P. / ENGLISH POLISHING PAPERS

Grit 60 / 80 120 / 150 / 320 / 400 1000/1200/1500/2000/2500 1/0,2/0,3/0,/4/0,5/0Per No. 84-00 80-00 126-00 126-00

(5) WARRIOR SIC W.P.P. PAPER : EMERY POLISHING PAPER :

80/120/150/180/220/320/400/600/800 Rs.17-00 1/0 - Rs. 24/- Each 2/0 3/0 4/0 5/0 Rs.20/- Each

(6) EMERY CLOTH TAPE ROLL (BLUE DRILL) PER ROLL OF 50 MTRS. (AJAX / CONCORD)Grit Coarse Medium Fine Ex-Fine

25mm(1”) 1110-00 923-00 810-00 820-0038mm (1 1/2”) 1374-00 1144-00 1003-00 1065-00

50mm(2”) 1745-00 1455-00 1275-00 1355-0075mm(3”) 2885-00 2400-00 2105-00 2150-00100mm(4”) 3895-00 3240-00 2840-00 2900-00150mm(6”) 5770-00 4800-00 4210-00 4300-00

(7) “AJAX” ALOXITE CLOTH TAPE ROLL OF 50 MTRS.Grit 36 60/80 100/120 150/180/220 320/400

38mm (11/2) 2460-00 1825-00 1775-00 1860-00 1860-0050mm(2”) 3240-00 2320-00 2180-00 2160-00 2350-0075mm(3”) 4860-00 3615-00 3400-00 3320-00 3670-00100mm(4”) 6555-00 5380-00 4580-00 4535-00 4950-00150mm(6”) 9715-00 7230-00 6785-00 7330-00 7330-00(8) “AJAX” ALOXITE R.M.C. CLOTH TAPE ROLL 50 MTRS.Grit 36 60/80 100/120 150/180/220 320/400

25mm (1”) - 1130-00 975-00 960-00 1145-0038mm (11/2) 2210-00 1700-00 1340-00 1440-00 1575-0050mm(2”) 2810-00 1980-00 1700-00 1700-00 1840-0075mm(3”) 4015-00 2825-00 2430-00 2640-00 2640-00100mm(4”) 4650-00 3780-00 3250-00 3220-00 3510-00150mm(6”) 6960-00 5650-00 4860-00 4820-00 5250-00(9) CONCORD HAND SANDER ROLL 50 MTRS / SAND MASTER

50/60 80/100/12038mm (1½) 970-00 870-0075mm (3”) 1750-00 1580-00100mm (SAND MASTER) 2450-00 2300-00(9) ALOXITE/RMC CLOTH BELTS (PRICE PER BELT)In mm In inch Grit 36 60/80 120 220/320/400150x1220 6”x48” 190-00 170-00 158-00 174-00

8

HT

(11) ALOXITE RESIN CLOTH BELTS (PRICE PER BELT) : “AJAX” / “JAWAN”In mm In inch 36 60/80 120 220 320/40050x2000 2”x80” 140-00 127-00 115-00 115-00 115-00150x1220 6”x48” 286-00 286-00 257-00 257-00 276-00(12) ALOXITE RESIN SADER DISC “ALFA” SUPREME / CUTFAST / ZIRCON

Per Size 24 36 60 80/120100 Nos. 180mm 9900-00 8500-00 8400-00 7700-00Each 180mm 109-00 93-00 92-00 84-00Each 125mm 53-00 48-00 46-00 42-00Each 100mm 40-00 35-00 35-00 33-00ZIRCON 180mm 122-00 108-00 102-00 93-00(13) ALOXITE - R.M.C.-CLOTH & RESIN PAPER DISCGrit 36 60/80 120

Each 10” (254mm) 84-00 72-00 62-00Each 12” (305mm) 123-00 105-00 91-00Each14” (350mm) 144-00 127-00 110-00

(14) AL0 FLAP DISC TEZZ / DURACUT 100 MM X 60 MM GRIT 36/60/80/120 45-00(15) “AJAX” “CUTFAST” BRAND/MOPS WHEEL/FLAP WHEEL.Size Grit - 36 60 80/120 150/180/220 320/400 600/800/1200

100x25 235-00 284-00 305-00 345-00 385-00 -150x25 360-00 431-00 473-00 521-00 576-00 -150x50 590-00 576-00 655-00 670-00 737-00 -200x25 - 829-00 1080-00 1140-00 1300-00 -200x50 - 1625-00 1570-00 1980-00 2200-00 -350x50x181 NDF - 2956-00 3230-00 3548-00 3939-00 3939-0020X25 & 25X25 - 84-00 94-00 103-00 131-00 -40X25 - 108-00 117-00 150-00 165-00 -50X25 - 130-00 143-00 155-00 200-00 -60X25 - 169-00 187-00 206-00 228-00 -80X25 - 194-00 215-00 236-00 262-00 -(16) CUMITEX NON-WOVEN ABRASIVES PADS

(17) NON-WOVEN ALO VERY FINE ROLL 20 METERS RS. 4300-00 NON-WOVEN ALO MEDIUM ROLL 20 METERS RS. 12,160-00

(18) CUMI UNITISED WHEEL “CUMITEX” GREY / RED “CUMIFLEX”Grit (V Soft)1SVF (Soft)3SVF (Hard) 5SVF (V Hard) 8SVF150x25x16 200-00 235-00 330-00 417-00150x50x16 385-00 467-00 650-00 836-00200x25x16 340-00 417-00 580-00 760-00200x50x16 680-00 837-00 1170-00 1510-00(19) CUMI UNITISED RED DISC

1SVF 3SVF 5SVF 8SVF100x13 93-00 102-00 113-00 120-00(20) NON WOVEN ABRASIVES FLAP WHEEL / ALO V. FINE / ALO. MEDIUM

Alo. V. Fine Alo Medium 150x50x50.8 1200-00 2470-00

(21) Cumi Grade Ex-Coarse Coarse Medium Fine Ex-Fine Sup.FineISS No 24-30 36-40 50-60 80,100,120 150,180 220,320

CUMI - COATED

Alo Medium (Ten)Rs. 206-00

Sic Ultra Fine (Grey)Rs. 117-00

Alo Very Fine Gold (Red)Rs. 49-00

9

HT

RUST PREVENTIVE MIN. PACKING PRICE PER LTR.CUMI GUARD140E 35 LTR. 430.00CUMIKOTE DW985 35 LTR. 400.00CUMIKOTE DW306 35 LTR. 340.00CUMIRUSTOFF 508 35 LTR. 275.00

WATER SOLUBLE COOLANTS - CUMISEMI-SYNTHETICCUMI MICRO S942 35 LTR. 410.00CUMI MICRO S930 35 LTR. 360.00EMULSIONCUMISTAR 306 35 LTR. 300.00CUMIALSTAR 308 35 LTR. 310.00CUMISOL 707 35 LTR. 280.00CUMIMAX 715 35 LTR. 310.00

NEAT OILCUMINEAT 304 35 LTR. 495.00CUMINEAT 1004 35 LTR. 320.00CUMINEAT 308 35 LTR. 260.00CUMIOIL SUPER 208 35 LTR. 310.00GREASECIMTAP 10 LTR. 900.00RUST PREVENTIVECIMGAURD 20 35 LTR. 940.00CLEANERSCIMCLEAN 50 35 LTR. 390.00CIMCLEAN PC 230 35 LTR. 500.00CIMCLEAN PC 340S 35 LTR. 780.00

WATER SOLUBLE COOLANTS - CIMCOOLSYNTHETICCIMTECH D14 35 LTR. 385.00CIMTECH D18 35 LTR. 450.00CIMTECH D16C 35 LTR. 1870.00SEMI SYNTHETICCIMSTAR 560 35 LTR. 550.00CIMSTAR MB602C 35 LTR. 550.00CIMSTAR SIR 35 LTR. 385.00EMULSIONCIMPERIAL HD812 35 LTR. 1100.00CIMPERIAL946080 35 LTR. 770.00

NEAT OILMILFORM 94 35 LTR. 2475.00MILFORM 2108 35 LTR. 660.00MILFORM 2220 35 LTR. 650.00MILFORM 2307 35 LTR. 710.00

ADDITIVESADDITIVE 2MC 35 LTR. 600.00ADDITIVE KATHON 25 KG. 3190.00

CUMILUBES METAL CUTTING FLUIDS & OILPRICE LIST EFFECTIVE FROM 01-11-2018

10

HT

CUMI POWER TOOLSPRICE LIST EFFECTIVE FROM 01-10-2018

Model Description Power No Load Weight Qty PRICEin watts Speed Per PER

in RPM Pack M/C.

TILE CUTTERCTC 110 PLUS 110mm Tile Cutter 1,050 12,000 14.7 4 3,750-00CTC 4-12 110mm Tile Cutter 1,250 12,500 14.7 4 4,950-00CTC 125 SG 125mm Tile Cutter with Soft Grip 1,350 12,000 15.6 4 5,400-00CTC 150 150mm Tile Cutter 1,050 7,300 15.2 4 5,450-00

GRINDERSCAG 4-600 100mm Angle Grinder 650 11,000 18 8 4,000-00CAG 4-700 S 100mm Angle Grinder 700 11,000 18 8 4,350-00CAG 100 P 100mm Angle Grinder 850 11,000 18.7 8 4,350-00CAG 125 125mm Angle Grinder 950 10,000 21.3 8 4,580-00CAG 180 E 180mm angle grinder 2,450 8,500 11.5 2 11,050-00CDG 06 6 mm Die Grinder 550 26000 19 10 4,900-00CSG 150 150mm Straight Grinder 950 5000 20 4 9,200-00

CHOPSAWSCCM 355 E Cut Off Saw 355 mm 2,300 3,500 16.5 1 13,900-00

DRILLSCRD 06 Rotary Drill 6 mm 240 2700 9.5 8 2,625-00CSD 010 Screw Driver 10 mm 280 800 12 10 3,150-00CRD 010 P Heavy Duty Rotory Drill 10 mm 400 3000 12 8 4,000-00CRD 010 VR Rotary Drill 10 mm (Fwd/Rev) 320 0 - 2500 12 10 3,675-00CID 013 VR Impact Drill 13 mm (Fwd/Rec) 650 0-2600 10 5 3,350-00

CORDLESS DRILLSCCD 010 Single Speed Cordless Drill-Lithium Ion 10.8 V 0-550 8 5 7,300-00CCD 010-2 Two Speed Cordless Drill-Lithium Ion 10.8 V 0-1300 8 5 8,400-00

HAMMER DRILLS / DEMOLITHION HAMMERSCDH 011 11Kg Demolition Hammer 1,500 - 12.5 1 34,500-00CDH 045 16Kg Demolition Hammer 1,240 - 18 1 22,750-00CCH 08 CH7 PPING Hammer6 kg 1,000 - 21 2 11,600-00

PLANERSCPH 082 1 mm wood planer 600 15,000 14.5 4 5,350-00

SPECIALITY TOOLSCB1 300 Blower 2.3 m3 /min 325 12,500 8.5 4 2,350-00CB1 500 V Blower 2.8 m3 /min (Variable) 500 0-16,000 21 8 2,900-00CHG 600 E Heat Gun 300/600° 1200 300/600° 12 10 1,700-00CHG 600 Heat Gun 300/600° 2000 300/600° 5.2 6 2,550-00

WOOD WORKING TOOLSCCS 405 Electric Chain Saw 16" 1300 400 11 2 10,600-00CPS 460 Petrol Chain Saw 18" 2200 8000 15 2 21,750-00CPS 560 Petrol Chain Saw 22" 2200 8000 17 2 22,750-00CJS 055 Jig Saw 55mm 500 500–3000 12 5 5,050-00CWS 190 E Circular Saw 1200 5000 11.5 2 7,500-00CCP 180 Car Polisher 180mm 1,200 600-3000 20 4 8,700-00CCW 90 Car Washer 90 Bar 1,800 - 20 2 11,500-00COS 185 Orbital Sander 185mm 300 12000 18 6 4,300-00CWR 012 N Router 12 mm 1,500 6,000-26,000 11 2 9,600-00

11

HT

WENDT / STARWENDT DIAMOND GRINDING WHEEL

ITEM TYPE DIA. (D) WIDTH DI BORE SIZE HEIGHT GRIT PRICECODE (MM) (U) (X) (MM) (T) SIZE PER RS.WCH 01 TAPER 100 2 10 31.75 35 D126 3810.00

WCH 02 TAPER 100 2 10 31.75 35 D76 3810.00

WCH 03 TAPER 100 10 2 31.75 35 D126 4025.00

WCH 04 STRAIGHT 150 12 2 31.75 - D126 6940.00

WCH 07 STRAIGHT 300 12 3 127 - D126 22440.00

WCH 08 STRAIGHT 150 12 3 31.75 - D126 9350.00

WCH 10 DISH 100 2 6 31.75 12 D126 3150.00

WCH 11 PARTING 150 1.1 5 31.75 - D181 3150.00WENDT DIAMOND LAPPING COMPOUND

ITEM CODE MESH SIZE SIZE IN MICRON PRICE PER RS. PREMIUMW30 600 30-40 750.00W20 800 20-30 750.00W15 1000 15-20 750.00W10 1500 10—15 750.00W8 2000 8—12 750.00W5 3000 4—8 550.00W3 5000 3—6 550.00W2 8000 2—4 550.00W0 12000 0—2 550.00

CUMI DRESS SINGLE POINT DIAMOND DRESSER ‘’A’’ GRADECARAT WEIGHT PRICE PER RS.0.25 CARAT 185.000.35 CARAT 265.000.50 CARAT 356.000.75 CARAT 530.001.00 CARAT 690.001.50 CARAT 1047.002.00 CARAT 1370.002.50 CARAT 1690.003.00 CARAT 2245.004.00 CARAT 3100.005.00 CARAT 3700.00MULTI POINT INDEXABLE DRESSEREM 24 1500.00EM 36 2100.00

GRIT IMPREGNATED DRESSERDG 4 346.00DG 5 414.00DG 6 576.00DG 8 852.00DG 10 1012.00DG 12 1208.00DG 12 C 1266.00DG 15 1564.00

CLUSTER TYPE DRESSERTool Code3/D 506.005/D 864.007/D 1140.009/D 1230.00

12

SIZE IN INCH MM GAUGE L/A HSS BI-METAL6 x 1/4 x 32 T Jr. Saw 150 x 6 x 0.4 23 8-50 -- --10 x 1/2 x 14/18/24/32T 250 x 12.5 x 0.63 23 -- 60-00 --12 x 1/2 x 14/18/24/32T 300 x 12.5 x 0.63 23 9-50 74-00 65-0012 x 1 x 10/14T 300 x 25 x 1.25 18 41-00 371-00 294-0014 x 1 x 10/14T 350 x 25 x 1.25 18 46-00 416-00 332-0016 x 1 x 10/14T 400 x 25 x 1.25 18 58-00 562-00 --18 x 1 x 10/14T 450 x 25 x 1.25 18 72-00 646-00 --14 x 1.1/4 x 6/10T 350 x 32 x 1.6 16 72-00 718-00 562-0016 x 1.1/4 x 6/10T 400 x 32 x 1.6 16 77-00 835-00 641-0018 x 1.1/4 x 6/10T 450 x 32 x 1.6 16 88-00 933-00 736-0018 x 1.1/2 x 6/10T 450 x 38 x 1.6 16 105-00 1238-00 ---18 x 1.1/2 x 6/10T 450 x 38 x 2.0 14 --- 1359-00 1075-0020 x 1.1/2 x 6/10T 500 x 38 x 2.0 14 --- 1540-00 ---21 x 1.1/2 x 6/10T 525 x 38 x 2.0 14 --- 1619-00 1302-0022 x 1.1/2 x 4/6/10T 550 x 38 x 2.0 14 --- 1715-00 ---24 x 1.1/2 x 4/6/10T 600 x 38 x 2.0 14 --- 1812-00 1510-0024 x 2 x 4/6/10T 600 x 50 x 2.0 14 --- 2597-00 ---24 x 1.1/2 x 4/6/8/10T 600 x 38 x 2.5 12 --- 2235-00 ---24 x 2 x 4/6/10T 600 x 50 x 2.5 12 --- 3050-00 2368-0028 x 2 x 4/6T 700 x 50 x 2.5 12 --- 3322-00 2741-0030 x 2 x 4/6T 750 x 50 x 2.5 12 --- 3987-00 3159-0032 x 2 x 4/6T 800 x 50 x 2.5 12 --- 4077-00 3238-0036 x 2 x 4/6T 900 x 50 x 2.5 12 --- 4681-00 3805-00

SIZE IN INCHES SIZE IN MM BP 101 (0 %) BP303 (8% CO) BP404 (10% CO) BP 505 (11% CO)3/16 x 3 5 x 75 116-00 281-00 289-00 -3/16 x 4 5 x 100 152-00 414-00 418-00 -3/16 x 6 5 x 150 235-00 884-00 895-00 -1/4 x 3 6 x 75 129-00 382-00 385-00 400-001/4 x 4 6 x 100 154-00 504-00 509-00 529-001/4 x 6 6 x 150 219-00 826-00 840-00 872-005/16 x 3 8 x 75 141-00 489-00 499-00 -5/16 x 4 8 x 100 188-00 671-00 679-00 -5/16 x 6 8 x 150 314-00 1077-00 1090-00 -3/8 x 3 10 x 75 184-00 582-00 587-00 612-003/8 x 4 10 x 100 219-00 769-00 777-00 809-003/8 x 6 10 x 150 341-00 1233-00 1245-00 1298-003/8 x 8 10 x 200 471-00 1753-00 1774-00 1848-001/2 x 4 12 x 100 341-00 1234-00 1247-00 1301-001/2 x 6 12 x 150 524-00 1938-00 1963-00 2045-001/2 x 8 12 x 200 691-00 2705-00 2738-00 2850-005/8 x 4 16 x 100 545-00 2079-00 2104-00 2195-005/8 x 6 16 x 150 804-00 3043-00 3081-00 3206-005/8 x 8 16 x 200 1088-00 4270-00 4323-00 4500-003/4 x 4 19 x 100 755-00 2854-00 2889-00 3006-003/4 x 6 19 x 150 1105-00 4189-00 4239-00 4413-003/4 x 8 19 x 200 1509-00 5742-00 5806-00 6043-001 x 6 25 x 150 1860-00 7027-00 7111-00 -1 x 8 25 x 200 2527-00 9372-00 9481-00 -

“BIPICO - ECLIPSE” H.S.S. TOOL BITS SQUARE & ROUNDNEW NEW

BIPICO - ECLIPSE HACKSHAW BLADES

PRICE LIST EFFECTIVE FROM 15-06-2018

13

2515 x 20 x 0.90 4/6,5/8,6/10,8/12,10/14 2058-00 - -3000 x 27 x 0.90 2/3,3/4,4/6,5/8,6/10,8/12,10/14 2557-00 2/3, 3/4, 5/6 3226-003505 x 27 x 0.90 2/3, 3/4, 4/6, 5/8, 6/1 0, 8/1 2, 1 0/1 4 2984-00 2/3, 3/4, 5/6 3766-003760 x 27 x 0.90 2/3,3/4,4/6,5/8,6/10,8/12,10/14 3210-00 2/3, 3/4, 5/6 4045-004100 x 34 x 1.1 2/3,3/4,4/6,5/8,6/10,8/12 3941-00 2/3, 3/4 5011-004420 x 34 x 1.1 2/3,3/4,4/6,5/8,6/10,8/12 4290-00 2/3, 3/4 5402-004570 x 34 x 1.1 2/3,3/4,4/6,5/8,6/10,8/12 4425-00 2/3, 3/4 5588-005800 x 41 x 1.3 2/3, 3/4, 4/6, 5/8 7527-00 2/3, 3/4 9487-006900 x 54 x 1.6 2/3, 3/4, 4/6 14138-00 2/3 17812-008000 x 67 x 1.6 0.75/1.25,1.4/2,2/3 22679-00 0.75/1.25,1.4/2 28578-008800 x 67 x 1.6 0.75/1.25,1.4/2,2/3 24943-00 I 0.75/1.25,1.4/2 31436-00

SIZEMM X THK TPI M/42 Gold

Price Per TPI M/51 PlatinumPrice Per

“BIPICO - ECLIPSE” BI-METAL BANDSAW BLADES

14

“BIPICO - ELIPSE” L/A METAL CUTTING BANDSAW ROLL-LOOPS

3/8 x 0.025” 10.0 x 0.63 8/10/14/18/24 1786-00 SIZE PRICE1/2 x 0.025” 12.5 x 0.63 6/8/10/14/18/24 1964-00 8’ x 3” 357-005/8 x 0.032” 16.0 x 0.80 6/8/10/14/15/24 2440-00 9’ x 10” 411-003/4 x 0.032” 19.00 x 0.80 4/6/8/10/14/18/24 2737-00 11’ x 7.6” 474-001” x 0.035” 25.0 x 0.90 4/6/8/10/14/18/24 3600-00

GENERAL PURPOSE SAW BLADE 15” x 4 / 6 / 10 / 14 - TPI RS. 160-00GENERAL PURPOSE SAW HANDLE RS. 341-00HACKSAW FRAME HEAVY DUTY ADUJSTABLE BHF 20 (Heavy Duty Adj.) RS. 609-00HACKSAW FRAME BHF 40 (Rectangular Type) RS. 401-00HACKSAW FRAME BHF 50 (Tubalar Type) RS. 276-00HACKSAW FRAME BHF 46 (Fix Type) RS. 295-00

SIZE IN INCH

“ BIPICO - ECLIPS” L/A JIGSAW BLADES ANY SIZE RS. 39-00“ BIPICO - ECLIPS” HSS JIGSAW BLADES ANY SIZE RS. 79-00

SIZE IN MM TPI PRICE PER ROLL WELDED LOOPS 3/4“

SIZE IN MM BP 101 (0% Cobalt) BP 202 (5% Cobalt) BP 303 (8% Cobalt) BP 404 (10% Cobalt) Unit of Pack6 x 75 mm 141 _ 418 424 16 x 100 mm 169 _ 555 562 16 x 150 mm 242 _ 912 924 16 x 200 mm 349 _ 1538 1557 110 x 75 mm 201 415 638 647 110 x 100 mm 242 555 845 855 110 x 150 mm 376 872 1357 1373 110 x 200 mm 517 1228 1931 1951 110 x 250 mm 663 1623 2551 2581 110 x 300 mm 833 1947 3063 3108 112 x 75 mm 303 _ 1042 1055 112 x 100 mm 376 _ 1359 1374 112 x 150 mm 576 _ 2133 2160 112 x 200 mm 761 _ 2975 3013 112 x 250 mm 1155 _ 4092 4143 112 x 300 mm 1368 _ 5282 5883 120 x 100 mm 828 2017 3142 3176 120 x 150 mm 1216 3018 4610 4661 120 x 200 mm 1659 4025 6314 6385 125 x 100 mm 1362 _ 5152 5216 125 x 150 mm 2045 _ 7730 7823 125 x 200 mm 2778 _ 10309 10430 1

HIGH SPEED STEEL TOOL BITS (SQUARE & ROUND)

SIZE IN MM SIZE IN INCHES BP 101 BP 202 BP 303 BP 404 Unit of Pack(0% Cobalt) (5% Cobalt) (8% Cobalt)

1.5x12x112 453 101.75x12x112 - - 575 - - 102.5x12x100 3/32x1/2x4 522 669 776 - 102.5x12x112 3/32x1/2x4.1/2 589 752 877 - 102.5x16x125 3/32x5/8x5 659 844 978 - 103x19x150 1/8x3/4x6 841 1080 1245 - 103x22x150 1/8x7/8x6 977 1229 1457 - 10

PARTING OF BLADES

15

SIZE IN MM SIZE IN INCHES BP 101 BP 202 BP 303 BP 404 Unit of Pack(0% Cobalt) (5% Cobalt) (8% Cobalt) (10% Cobalt)

3x19x150 1/8x3/4x6 636 800 890 1235 10

3x25x150 1/8x1x6 900 1129 1258 1747 10

6x12x150 1/4x1/2x6 564 725 780 1128 10

6x19x150 1/4x3/4x6 795 1006 1096 1547 5

10x19x150 3/8x3/4x6 1095 1428 1515 2210 5

10x25x150 3/8x1x6 1917 2409 2677 3730 5

12x19x150 1/2x3/4x6 1296 1652 1802 2913 5

12x25x150 1/2x1x6 1760 2213 2459 3419 5

HSS FLAT TOOL BITS

SIZE (mm) SIZE IN INCHES PRICE300x19x0.80 12x3/4x0.032 23

350x19x0.80 14x3/4x0.032 25300x19x1.25 12x3/4x0.050 28

350x25x1.25 14x1x0.050 41150x32x1.6 6x1.1/4x0.062 28

250x32x1.6 10x1.1/4x0.062 45325x32x1.6 13x1.1/4x0.062 59350x32x1.6 14x1.1/4x0.062 61

400x32x1.6 16x1.1/4x0.062 69450x32x1.6 18x1.1/4x0.062 77

150x38x1.6 6x1.1/2x0.062 30175x38x1.6 7x1.1/2x0.062 35

225x38x1.6 9x1.1/2x0.062 43

LOW ALLOY STEEL - PATASIZE (mm) SIZE IN INCHES PRICE350x38x1.6 14x1.1/2x0.062 63

450x38x1.6 18x1.1/2x0.062 82150x45x1.6 6x1.3/4x0.062 35

175x45x1.6 7x1.3/4x0.062 39225x45x1.6 9x1.3/4x0.062 48

450x45x1.6 18x1.3/4x0.062 101175x50x1.6 7x2x0.062 43225x50x1.6 9x2x0.062 56

350x50x1.6 14x2x0.062 88375x50x1.6 15x2x0.062 88

400x50x1.6 16x2x0.062 92425x50x1.6 17x2x0.062 105

450x50x1.6 18x2x0.062 121

SIZE (MM) SIZE IN INCH PRICE UNIT OF PACK12 1/2 250 116 5/8 264 119 3/4 278 122 7/8 283 125 1 288 129 1.1/8 298 132 1.1/4 307 135 1.3/8 324 138 1.1/2 331 140 1.9/16 337 144 1.3/4 351 148 1.7/8 360 151 2 374 1

UNIVERSAL HOLE SAW BIMETAL HASS M42 - 8 COBALTSIZE (MM) SIZE IN INCH PRICE UNIT OF PACK54 2.1/8 384 157 2.1/4 413 160 2.3/8 422 164 2.1/2 470 167 2.5/8 475 170 2.3/4 480 176 3 552 179 3.1/8 557 183 3.1/4 624 186 3.3/8 643 189 3.1/2 672 192 3.3/8 710 195 3.3/4 720 1102 4 768 1

16

SIZE (MM) SIZE IN INCH PRICE UNIT OF PACK14 9/16 336 116 5/8 240 119 3/4 250 122 7/8 264 125 1 298 129 1.1/8 326 132 1.1/4 336 135 1.3/8 346 138 1.1/2 360 140 1.9/16 374 144 1.3/4 422 148 1.7/8 442 151 2 456 154 2.1/8 494 157 2.1/4 518 160 2.3/8 538 164 2.1/2 557 167 2.5/8 576 170 2.3/4 595 176 3 624 1

PRECISION HOLE SAW BIMETAL HASS M42 - 8% COBALTSIZE (MM) SIZE IN INCH PRICE UNIT OF PACK79 3.1/8 643 183 3.1/4 662 186 3.3/8 682 189 3.1/2 696 192 3.3/8 710 155 3.3/4 749 1102 4 845 1105 4.1/8 912 1108 4.1/4 1104 1111 4.3/8 1171 1114 4.1/2 1210 1121 4.3/4 1344 1127 5 1421 1133 5.1/4 1536 1140 5.1/2 1728 1152 6 1824 1160 6.5/16 1920 1183 7.3/16 2016 1210 8.9/32 2016 1

CODE NO. DESCRIPTION SUITABLE FOR RETAIL PRICE UNIT OF PACKBPA-03 Arbor Hex shank 9 MM 14 to 32 MM 327 1BPA-05 Arbor Hex shank Quick Release 9 MM 35 to 210 MM 431 1BPA-06 Arbor Hex shank Quick Release 11 MM 35 to 210 MM 485 1

HOLE SAW ACCESSORIES (ARBOR WITH DRILL)

SIZE IN MM GRIT PRICE PER PC. UNIT OF PACK MASTER CARTON100X16 Metal 36 45 20 200100X16 Metal 60 38 20 200100X16 Metal 80 38 20 200100X16 Metal 120 38 20 200100X16 Zircon-SS 60 77 20 200100X16 Zircon-SS 80 77 20 200115X22.2 60 50 20 200115X22.2 100 50 20 200115X22.2 120 50 20 200125x22.2 60 63 20 200125x22.2 80 63 20 200125x22.2 120 63 20 200

FLAP DISC (ALUMINIUM OXIDE, ZIRCONIA OXIDE)

SIZE IN MM COLOURS GRIT PRICE PER PC. UNIT OF PACK MASTER CARTON150mm x 230mm (6" x 9") GREEN 240 42 10 400

150mm x 230mm (6" x 9") MAROON 400 35 10 480

150mm x 230mm (6" x 9") BROWN 600 28 10 480

non woven pad

17

SIZE IN MM GRIT PRICE PER PC. UNIT OF PACK MASTER CARTON125 16 18 50 500

125 24 16 50 500

125 36 16 100 1000

125 60 16 100 1000

125 80 16 100 1000

125 120 16 100 1000

180 24 30 100 1000

180 36 30 100 1000

180 60 30 100 1000

180 80 30 100 1000

ALUMINIUM OXIDE FIBER DISC

SIZE IN MM GRIT PRICE PER PC. UNIT OF PACK MASTER CARTON125 36 10 100 1000

125 40 9 100 1000

125 60 8 100 1000

125 80 8 100 1000

125 100 8 100 1000

150 60 11 100 1000

150 80 11 100 1000

150 120 11 100 1000

150 320 11 100 1000

VELCRO DISC

SIZE IN MM GRIT PRICE PER PC. UNIT OF PACK MASTER CARTON25x25 60 42 10 1000

25 x 25 80 42 10 1000

25x25 120 42 10 1000

40 x 25 60 59 10 1000

40x25 80 59 10 1000

40x25 120 59 10 1000

50x25 60 81 10 1000

50x25 80 81 10 1000

50x25 120 81 10 1000

60x25 60 81 10 1000

60x25 80 81 10 1000

60x25 120 81 10 1000

80 x 25 60 118 10 1000

80x25 80 118 10 1000

80x25 120 118 10 1000

MOPS WHEEL (FLAP WHEEL ON SHAFT)

18

RESIN METAL CLOTH TAPE ROLL

Size Type Grit PriceUnit ofPackQty

MasterCarton

Qty

2" x 50 Meter Metal 60 1613 1 3

2" x 50 Meter Metal 80 1613 1 3

2" x 50 Meter Metal 120 1613 1 3

4" x 50 Meter Metal 60 2218 1 1

4" x 50 Meter Metal 80 2218 1 1

4" x 50 Meter Metal 120 2218 1 1

4" x 50 Meter - Green Metal 60 1613 1 1




4" x 30 Meter Metal 36 1562 1 1

4" x 30 Meter Metal 40 1562 1 1

4" x 30 Meter Metal 60 1562 1 1

4" x 30 Meter Metal 80 1562 1 1

6" x 50 Meter Metal 60 3326 1 1


MasterCarton

Qty

6" x 50 Meter Metal 80 3326 1 1

6" x 50 Meter Metal 120 3326 1 1

12" x 50 Meter Metal 36 8064 1 1

1 2" x 50 Meter Metal 60 7031 1 1

12" x 50 Meter Metal 80 7031 1 1

1 2" X 50 Meter Metal 120 7031 1 1

1 2" X 50 Meter Metal 180 7031 1 1

1 2" X 50 Meter Metal 220 7031 1 1

12" X 50 Meter Metal 320 7031 1 1

1 2" X 50 Meter Metal 400 7031 1 1

12" X 50 Meter- Green Metal 60 4838 1 1

1 2" X 50 Meter - Green Metal 80 4838 1 1

12" X 50 Meter- Green Metal 100 4838 1 1

1 2" X 50 Meter -Green Metal 120 4838 1 1

RESIN METAL CLOTH BELT


MasterCarton

Qty

50 mm x 2000 Metal 60 67 10 50

50 mm x 2000 Metal 80 67 10 50

50 mm x 2000 Metal 120 67 10 50

50 mm x 2000 Metal 180 67 10 50

50 mm x 3000 Metal 60 101 10 50

50 mm x 3000 Metal 120 101 10 50

50 mm x 3500 Metal 60 118 10 50

50 mm x 3500 Metal 80 118 10 50

50 mm x 3500 Metal 120 118 10 50

50 mm x 3500 Metal 400 141 10 50

100 mm x 1220 Metal 60 84 10 50

100 mm x 1220 Metal 80 84 10 50

100 mm X 1220 Metal 120 84 10 50


MasterCarton

Qty

150 mm x 1220 Metal 60 126 10 50

150 mm x 1220 Metal 80 126 10 50

150 mm x 1220 Metal 120 126 10 50

1 50 mm x 3500 Metal 60 363 10 50

200 mm x 3500 Metal 60 468 10 50

75 mm x 3000 Metal 60 146 10 50

75 mm x 3000 Metal 120 146 10 50

75 mm x 3500 Metal 60 184 10 50

75 mm x 3500 Metal 80 167 10 50

75 mm x 3500 Metal 120 162 10 50

75 mm x 3500 Metal 320 162 10 50

75 mm x 3500 Metal 400 167 10 50

75 mm x 3500 Metal 600 184 10 50

19

MACHINIST FILESSize in mm Flat Super Flat Mil l

Light Handle File

SAW FILESSize in mm Heavy / Slim Pit Flat Half Round Horse

Regular Taper Saw Wood Wood RASPTaper Rasps Rasp

RASP FILES

BASTARD BASTARD

100 594 615 574

113 767 726 776

125 857 746

150 1109 776 3155 3690

200 1582 1271 4274 4713

250 5000 5594

300 6482 6824 6582

350 7731 8467 8598

MACHINIST FILES

SIZEmm

FLAT HALF ROUND ROUND SQUARE THREE SQUARE

BASTARD 2nd CUT SMOOTH BASTARD 2nd CUT SMOOTH BASTARD 2nd CUT SMOOTH BASTARD 2nd CUT SMOOTH BASTARD 2nd CUT SMOOTH

100 2046 2379 2711 3679 3971 4153 2490 2873 3246 2862 3024 3155 2943 3165 3276

150 2046 2711 2994 4093 4374 4698 2903 3074 3296 3074 3155 3316 3145 3296 3679

200 2066 3165 3407 5191 5746 6098 3266 3316 3820 3165 3316 3690 4153 4395 4698

250 2077 3316 4173 6613 7731 8145 4223 4405 4758 4234 4415 4738 5574 5886 6320

300 3135 4909 5454 8901 9314 10130 5252 5584 6149 5252 5584 6290 7036 7389 7762

350 7319 7328 8064 11108 12046 12721 7389 7711 8447 6975 7499 7650 9465 9868 10251

ABRASIVES - CUTTING DISC & GRINDING DISC

CUTTING DISC FOR METAL - FLAT (T41)

Size in mm Grit Price Unitof

Pack

100x3.0x16.0 2 22 50

125x3.0x22.2 2 38 50

180x3.0x22.2 2 68 50

300x3.0x25.4 1 150 25

350x3.0x25.4 1 190 25

350x2.8x25.4 1 190 25

350x3.0x25.4-2 Net 2 211 25

355x2.5x25.4 IGI 1 190 25

400x4.0x25.4 Raiicut 2 U33 25

400x4.0x25.4-SS 2 439 25

SUPERCUT - STEEL FILES

CUTTING DISC FOR METAL - DC (T27)


Pack

100x4.0x16.0 2.5 35 25

100x6.0x16.0 2.5 40 25

102x2.8x16.0 (G) 2 36 20

125x5.0x22.2 2.5 58 25

125x7.0x22.2 2.5 68 25

180x6.0x22.2 2.5 108 25

180x7.0x22.2 2.5 124 25

180x6.0x22.2-CI 2.5 117 25

180x6.0x22.2-SS 2.5 117 25

230x6.0x22.2 2.5 168 25

230x7.0x22.2 2.5 186 25

CUTTING DISC FOR STAINLESS STEEL - FLAT (T41)


Pack

105x1.0x16.0 (G&B) 2 22 50

100X1.6X16.0lnox/Metal 2 22 100

125X1.0x22.2lnox/Metal 2 39 100

125X1.6X22.2 Inox/Metal 2 39 100

180x1.6x22.2 lnox/ss 2 77 50

230x2.0x22.2 mox/Metai 2 110 50

250X1.3X25.4 Inox/Metal 2 140 50

250X2.0X25.4 Inox/Metal 2 140 50

350x2.8x25.4 mox/Metai 1 198 25

350x3.0x25.4 inox/ss 2 229 25

2nd CUT BASTARD MILL

/2nd CUT BASTARD

100 1562

150 1593

200 1602

250 1663 1683 1613

300 2178

350 4849

20

HT

SUNNER INDIA FLEXIBLE SHAFT MACHINES

DESCRIPTION OF F. S. MACHINE SET INCL. SHAFT / T. HOLDER WITHOUT YOKE & BASEMOTOR PHASE H.P. RPM SHAFT T.H. PRICE RS.

ROTO FAS U75 SINGLE 0.75 12000 10 x 1500 F.H. 10N 30400-00ROTO FAS 100 THREE 1.00 12000 10 x 1500 F.H. 10N 28460-00ROTO FAS 150 THREE 1.50 12000 10 x 1500 F.H. 10N 33700-00ROBO FAS THREE 2.50 12000 10 x 1500 F.H. 10N 36850-00ROTO FINISH U75 SINGLE 0.75 8000 10 x 1500 F.H. 10N 30400-00ROTO FINISH 100 THREE 1.00 8000 10 x 1500 F.H. 10N 29550-00ROTO FINISH 150 THREE 1.50 8000 10 x 1500 F.H. 10N 33700-00ROBO FINISH THREE 2.50 8000 10 x 1500 F.H. 10N 36850-00ROTO FETTLE 150 THREE 1.50 5800 15 x 2000 W.H. 15 35600-00ROBO FETTLE THREE 2.50 5800 15 x 2000 W.H. 15 40000-00ROTO FLEX U75 SINGLE 0.75 2800 12 x 2000 W.S. 10 22900-00ROTO FLEX 100 THREE 1.00 2800 12 x 2000 W.S. 10 21600-00ROTO FLEX 150 THREE 1.50 2800 15 x 2000 W.H. 15 25580-00ROBO FLEX THREE 2.50 2800 15 x 2000 W.H. 15 27000-00ROTO FERA 7 SPEED THREE 1.00 850 to 12000 10 x 1500 F.H. 10N 39760-00ROTO TRIO 3 SPEED THREE 1.00 5700 to 12000 10 x 1500 F.H. 10N 34200-00ROTO 128 2 SPEED THREE 1.00 12000, 8000 10 x 1500 F.H. 10N 32100-00ROTO 573 2 SPEED THREE 1.00 5700, 3200 12 x 2000 W.S. 10 32380-00ROTO TETRA 4 SPEED THREE 1.00 12000, 8000 12 x 2000 W.S. 10 36180-00

SUNNER INDIAPRICE LIST EFFECTIVE FROM 01-01-2019

SUNNER INDIA SPARE ASSEMBLIES AND INNER

DESCRIPTION ASSEMBLY PRICE RS. INNER PRICE RS.15 x 3000 4900-00 1860-0015 x 2000 3550-00 1580-0015 x 1500 3280-00 1510-0012 x 3000/10 3870-00 1670-0012 x 2000/10 2970-00 1460-0012 x 1500/10 2630-00 1380-0010 x 2000 2500-00 1080-0010 x 1500 2150-00 1030-0010 x 2000 RB SHAFT 3270-00 1080-0012 x 2000 RB SHAFT 3700-00 1460-0015 x 1500 RB SHAFT 4250-00 1510-0015 x 2000 RB SHAFT 4500-00 1580-0015 x 3000 RB SHAFT 6170-00 1860-00

DISCRIPTION PRICE RS.FH 10N 2065-00WS 10 1840-00WH 15 2350-00RAA 10 4750-00RAA 15 8080-00

SUNNER INDIA TOOL HOLDERS

DISCRIPTION PRICE RS.6.0mm/6.35mm COLLET 325-00

COLLET NUT 145-00STOP SPRING & BUTTON 50-00

TOMMY BAR 95-00MOUNTED POINT SOCKET 460-00YOKE & BASE (1.0/0.75HP) 1080-00YOKE & BASE (1.5/2.5HP) 1100-00

SUNNER INDIA ACCESSORIES

21

BRAND H.S.S. PARALLEL SHANK TWIST DRILLS

DAGGER PRICE LIST118

Effective from24-11-2018

AUTHORISED STOCKIST FOR INDIAN TOOLS“IT” Drills, Reamers, Cutters, End Mills, Tapset, Tool Bits etc.

STUBDRILL PRICE

PER PC.INCH MM WG/LG

ST. DRILL (JOBBER)DRILL PRICE

PER PC.

- - 0.5 - 79.20- - 0.6 - 79.20- - 0.7 - 79.20- - 0.8 - 66.30- - 0.9 - 63.20

42.30 3/64",1/16" 1.0 to 1.6 60 to 53 40.4042.30 5/64", 3/32", 7/64" 1.7 to 2.75 52 to 36 43.5047.70 - 2.8 to 3 35 to 32 47.70 64.5055.30 1/8" 3.1 3.17 56.90 76.7058.10 9/64" 3.2 to 3.5 30 to 28 58.80 79.5080.40 5/32" 3.6 to 4 27 to 22 83.10 112.2089.40 11/64" 4.1 to 4.4 21 to 17 100.80 136.20

118.40 3/16" 4.5 to 4.8 16 to 12 132.40 178.80125.90 13/64" 4.9 to 5.2 11 to 6 143.80 194.10136.80 7/32" 5.3 to 5.6 5 to 3 155.10 209.40153.90 15/64" 5.7 to 6 2,1 & A 174.50 235.60172.30 1/4" 6.1 to 6.4 B to E 190.00 256.40212.00 17/64" 6.5 to 6.8 F to H 242.40 327.20232.50 9/32" 6.9 to 7.2 I to K 265.30 358.20241.60 - 7.3 to 7.5 L to M 280.00 378.10265.30 19/64" 7.6 to 7.9 N 303.10 449.10291.90 5/16" 8 to 8.2 O to P 332.80 449.10364.70 21/64" 8.3 to 8.7 Q to R 403.30 544.40380.40 11/32" 8.8 to 9 S 424.80 573.60401.70 23/64" 9.1 to 9.5 T to U 443.20 598.20420.00 3/8" 9.6 to 9.8 V to W 502.40 759.20513.90 25/64" 9.9 to 10.2 X 562.40 759.20553.20 13/32" 10.3 to 10.6 YZ 609.40 822.90622.80 27/64" 10.7 to 11.0 - 645.20 871.00648.70 7/16" 11.1 to 11.4 - 720.20 972.30694.00 29/64" 11.5 to 11.8 - 759.60 1025.50734.30 15/32" 11.9 to 12.2 - 811.30 1095.20798.00 31/64" 12.3 to 12.6 - 860.50 1161.70815.20 1/2" 12.7 to 13.0 - 908.50 1226.40954.60 33/64" 13.1 to 13.4 - 1130.10

1017.20 17/32" 13.5 to 13.8 - 1203.001107.50 35/64" 13.9 to 14.25 - 1305.201153.59 9/16" 14.5 - 1369.501247.30 37/64" & 19/32" 14.75 to 15.25 - 1475.601350.20 39/64" & 5/8" 15.5 to 16.0 - 1598.801399.40 11/16" - - 1691.201496.10 3/4" - - 1935.60

24 - Indraprasth Bunglow, Near Golden Tulip Bunglow, Shreyas Tekra, Near ShreyasCrossing, Manekbaugh, Ahmedabad, Gujarat, India - 380015Phone : 91-7878128174, 22710940 • M. : 91-98259-21374

RUNIV ENGIEERS PVT. LTD.

NEW M35PANTHER

22

TAPER SHANK TWIST DRILLS

SIZE Rs. EACH SIZE Rs. EACH SIZE Rs. EACH SIZE Rs. EACH

1/8" 404.00 25/32" 2896.00 1.5/64" 6470.00 20.0 mm 3115.003/16" 545.00 27/32" 3368.00 1.7/64" 7095.00 20.5 mm 3152.001/4" 623.00 29/32" 4123.00 1.9/64" 7429.00 21.0 mm 3287.005/16" 678.00 31/32" 4898.00 1.11/64" 7614.00 21.5 mm 3473.003/8" 828.00 1.1/32" 5650.00 1.13/64" 8798.00 22.0 mm 3537.007/16" 1220.00 1.3/32" 6470.00 1.15/64" 10218.00 22.5 mm 3855.001/2" 1272.00 1.5/32" 7429.00 1.17/64" 11187.00 23.0 mm 3930.009/16" 2127.00 1.7/32" 8798.00 1.19/64" 11454.00 23.5 mm 4678.005/8" 2241.00 1.9/32" 11187.00 1.21/64" 12070.00 24.0 mm 4816.0011/16" 2491.00 1.11/32" 12582.00 3.0 mm 404.00 24.5 mm 4898.003/4" 2757.00 1.13/32" 14140.00 3.5 mm 404.00 25.0 mm 5117.0013/16" 3152.00 1.15/32" 15005.00 4.0 mm 404.00 25.5 mm 5637.007/8" 3537.00 1.17/32" 16735.00 4.5 mm 545.00 26.0 mm 5699.0015/16" 4678.00 9/64" 422.00 5.0 mm 545.00 26.5 mm 6105.001" 5186.00 11/64" 545.00 5.5 mm 545.00 27.0 mm 6450.001.1/16" 6245.00 13/64" 561.00 6.0 mm 545.00 27.5 mm 6470.001.1/8" 7095.00 15/64" 561.00 6.5 mm 676.00 28.0 mm 7075.001.3/16" 8040.00 17/64" 687.00 7.0 mm 676.00 28.5 mm 7095.001.1/4" 10218.00 19/64" 687.00 7.5 mm 676.00 29.0 mm 7429.001.5/16" 11454.00 21/64" 871.00 8.0 mm 678.00 29.5 mm 7458.001.3/8" 13341.00 23/64" 909.00 8.5 mm 755.00 30.0 mm 7614.001.7/16" 14643.00 25/64" 971.00 9.0 mm 828.00 31.0 mm 9791.001.1/2" 16229.00 27/64" 1220.00 9.5 mm 828.00 31.5 mm 10218.001.9/16" 17724.00 29/64" 1260.00 10.0 mm 884.00 32.0 mm 11187.001.5/8" 19218.00 31/64" 1272.00 10.5 mm 1177.00 32.5 mm 11187.001.3/4" 21970.00 33/64" 1848.00 11.0 mm 1220.00 33.0 mm 11454.002" 29472.00 35/64" 1979.00 11.5 mm 1260.00 33.5 mm 11848.00

37/64" 2209.00 12.0 mm 1272.00 34.0 mm 12070.0039/64" 2241.00 12.5 mm 1272.00 34.5 mm 13219.0041/64" 2307.00 13.0 mm 1771.00 35.0 mm 13341.00

5/32" 404.00 43/64" 2491.00 13.5 mm 1979.00 36.0 mm 14348.007/32" 545.00 45/64" 2725.00 14.0 mm 1979.00 38.0 mm 16229.009/32" 676.00 47/64" 2757.00 14.5 mm 2209.00 40.0 mm 18180.0011/32" 828.00 49/64" 2896.00 15.0 mm 2209.00 41.0 mm 19218.0013/32" 960.00 51/64" 3152.00 15.5 mm 2241.00 42.0 mm 19972.0015/32" 1260.00 53/64" 3368.00 16.0 mm 2307.00 43.0 mm 21222.0017/32" 1848.00 55/64" 3537.00 16.5 mm 2451.00 44.0 mm 21970.0019/32" 2209.00 57/64" 3930.00 17.0 mm 2451.00 45.0 mm 22486.0021/32" 2451.00 59/64" 4678.00 17.5 mm 2586.00 46.0 mm 23504.0023/32" 2725.00 61/64" 4898.00 18.0 mm 2725.00 47.0 mm 24689.00

63/64" 5117.00 18.5 mm 2725.00 48.0 mm 27486.001.1/64" 5699.00 19.0 mm 2757.00 49.0 mm 27686.001.3/64" 6245.00 19.5 mm 2896.00 50.0 mm 27985.00

SIZEHSS ST SHANK SIZE 1 /16" to 1 /4"DRILL SET 1715-00 (13 PCS.)

MM 1.0 to 13.0 (25 PCS.)with Stand Rs. 9430-00

1/16" to 1/2" (29 PCS.)Rs. 10920-00 Setwith stand

23

HSS PARALLEL SHANK LONG SERIES DRILL

SIZEINCH

PRICEEachRs.

SIZEINCH

PRICEEachRs.

SIZEINCH

PRICEEachRs.

SIZEINCH

PRICEEachRs.

SIZEINCH

PRICEEachRs.

SIZE END MILL SLOT HAND& TAPER SIZE END MILL SLOT HAND & TAPERINCH ST. PRICE CUTTER MACHINE PIN MM ST. PRICE CUTTER MACHINE PIN

EACH PRICE REAMER REAMER EACH PRICE REAMER REAMEREACH PRICE PRICE EACH PRICE PRICE

EACH EACH EACH EACHRs. Rs. Rs. Rs. Rs. Rs. Rs. Rs.

3/64" 254.00 7/32" 475.00 - - - - - -

1/16" 254.00 15/64" 516.00 27/64" 1482.00 2.0 254.00 9.0 1039.00

5/64" 254.00 1/4" 538.00 7/16" 1365.00 3.0 326.00 9.5 1039.00

3/32" 324.00 17/64" 905.00 29/64" 1586.00 4.0 352.00 10.0 1086.00

7/64" 324.00 9/32" 905.00 15/32" 1404.00 5.0 414.00 10.5 1305.00

1/8" 326.00 19/64" 905.00 31/64" 1613.00 5.5 475.00 11.0 1365.00

9/64" 326.00 5/16" 933.00 1/2" 1446.00 6.0 516.00 11.5 1404.00

5/32" 352.00 21/64" 933.00 9/16" 2232.00 6.5 750.00 12.0 1447.00

11/64" 352.00 11/32" 988.00 5/8" 2429.00 7.0 905.00 12.5 1447.00

3/16" 352.00 23/64" 1175.00 3/4" 2968.00 7.5 905.00 13.0 2008.00

13/64" 414.00 3/8" 1039.00 13/16" 3329.00 8.0 933.00 13.5 2232.00

— — 13/32" 1090.00 1" 5212.00 8.5 940.00 14.0 2232.00

— — 25/64" 1202.00 — — — — — —

1/8" 640.00 776.00 1109.00 — 3.0 640.00 776.00 1109.00 2380.005/32" 640.00 776.00 1109.00 — 4.0 640.00 776.00 1109.00 2380.003/16" 640.00 776.00 1109.00 2218.00 5.0 640.00 776.00 1109.00 2380.007/32" 640.00 828.00 1109.00 2218.00 6.0 715.00 831.00 1289.00 2380.001/4" 715.00 831.00 1289.00 2218.00 7.0 804.00 831.00 1291.00 -9/32" 804.00 — 1291.00 2426.00 8.0 804.00 831.00 1464.00 3222.005/16" 804.00 831.00 1464.00 2687.00 9.0 804.00 831.00 1527.00 -3/8" 804.00 831.00 1664.00 3064.00 10.0 804.00 862.00 1844.00 3574.007/16" 804.00 849.00 2071.00 3571.00 11.0 804.00 862.00 2071.00 -1/2" 831.00 941.00 2235.00 4037.00 12.0 831.00 941.00 2154.00 4314.009/16" 1030.00 1203.00 2719.00 4667.00 14.0 1030.00 1203.00 2719.00 4843.005/8" 1203.00 1354.00 2737.00 5192.00 16.0 1203.00 1354.00 2737.00 5391.0011/16" 1345.00 1531.00 3150.00 — 18.0 1462.00 1667.00 3375.00 —3/4" 1462.00 1667.00 3587.00 6543.00 19.0 1462.00 — 3587.00 —13/16" 1617.00 1943.00 4072.00 — 20.0 1617.00 1667.00 3999.00 8385.007/8" 1835.00 — 4525.00 8074.00 22.0 1835.00 1943.00 4525.00 —15/16" — — 5852.00 — 25.0 2140.00 2306.00 5868.00 8897.001" 2140.00 2306.00 5972.00 — 28.0 3045.00 3820.00 8290.00 —1.1/8" 3045.00 3282.00 8290.00 — 30.0 3351.00 — 9489.00 11972.001.1/4" 3655.00 4002.00 10478.00 — 32.0 3655.00 4002.00 10478.00 13154.001.3/8" 4414.00 4813.00 14628.00 — 36.0 4813.00 5168.00 14628.00 —1.1/2" 5168.00 5574.00 16057.00 — 40.0 6228.00 5965.00 19394.00 23522.001.5/8" 6228.00 6899.00 23051.00 — — — — — —

HSS / ENDMILL / SLOT DRILL / REAMER

24

HSS HAND TAPS, BSW, BSF, UNC, UNF & HSS NUT TAPS BSW, BSF, UNC, UNF

1/8" 963.00 691.00 474.00 M 3.0 918.00 — 670.00 1/16" — 1304.003/16" 963.00 691.00 521.00 M 4.0 918.00 — 670.00 1/8" 1020.00 1304.001/4" 999.00 783.00 527.00 M 5.0 987.00 — 484.00 1/4" 1590.00 2334.005/16" 1128.00 981.00 613.00 M 6.0 987.00 699.00 518.00 3/8" 2346.00 3086.003/8" 1374.00 1293.00 737.00 M 8.0 1167.00 789.00 560.00 1/2" 3418.00 4436.007/16" 1758.00 1603.00 876.00 M 10.0 1431.00 1047.00 711.00 5/8" 3870.00 —1/2" 2223.00 2226.00 1040.00 M 12.0 2235.00 1616.00 993.00 3/4" 5248.00 6866.009/16" 3219.00 2226.00 — M 14.0 3171.00 2247.00 1430.00 7/8" 6546.00 —5/8" 3219.00 2890.00 1524.00 M 16.0 3171.00 2247.00 1430.00 1" 8248.00 10672.003/4" 4848.00 3397.00 1902.00 M 18.0 4887.00 3436.00 2104.00 1.1/4" 12386.00 15644.007/8" 6687.00 4053.00 3048.00 M 20.0 6228.00 4588.00 2617.00 1.1/2" 15456.00 19186.001" 8460.00 6052.00 3820.00 M 22.0 6672.00 4693.00 2904.00 1.3/4" 28644.001.1/4" 13770.00 10101.00 6138.00 M 24.0 7329.00 5289.00 3207.00 2" 27748.00 33708.001.1/2" 21345.00 14405.00 9565.00 M 30.0 12618.00 10111.00 5299.00

M 36.0 21357.00 14439.00 8423.00

SIZE

SET OF3 PCS.PRICE

RS

NUTTAPSEACH

RS.

MACHINETAPSTYPEA & C

SIZE

SET OF3 PCSPRICE

RS

NUTTAPSEACH

RS.

MACHINETAPSTYPEA & C

SIZEINCH

BSPT ANDNPT SET OF

2 PCSPRICE RS.

HSS SIDE & FACE CUTTER HSS CENTRE DRILLS

1/4" 4201.00 5917.00 8317.00 8912.005/16" 4414.00 6343.00 8927.00 9690.003/8" 4682.00 6767.00 9565.00 10513.007/16" 4899.00 7194.00 10233.00 11345.001/2" 5158.00 7515.00 10900.00 12186.005/8" 5656.00 8511.00 12309.00 13864.003/4" 6072.00 9383.00 13669.00 15590.007/8" 6758.00 10233.00 15094.00 17304.001" 7302.00 11118.00 16506.00 18969.00

SIZE 3" 4" 5" 6" SIZE PRICEEACH RS.

BS-1 (3/64x1/8) 215.00BS-2 (1/16x3/16) 215.00BS-3 (3/32x1/4) 248.00BS-4 (1/8x5/16) 384.00BS-5 (3/16x7/16) 502.00BS-6 (1/4x5/8) 945.00BS-7 (5/16x3/4) 1459.00

(

MASONARY DRILL

MM INCH STD.PRICE

DELUXEPRICE

SUPERGranatoPRICE

3 1/8" 54.00 61.00 96.004 5/32" 65.00 73.00 116.005 3/16" 73.00 80.00 125.005.5 7/32" 87.00 96.00 147.006 15/64" 96.00 106.00 168.006.5 1/4" 87.00 96.00 147.007 9/32" 169.00 184.00 195.008 5/16" 148.00 164.00 258.009 11/32" 196.00 216.00 342.0010 3/8" 174.00 192.00 301.0011 7/16" 245.00 270.00 424.0012 15/32" 217.00 240.00 374.0013 1/2" 217.00 240.00 374.00

BS CUTTERKEY NO.

PRICEEACH

305 2040.00404 2040.00405 2040.00505 2040.00406 2377.00606 2377.00608 2791.00808 3375.00810 4940.001010 4940.001210 4940.00812 6793.001012 6793.001212 6793.00

MORSETAPER

PARALLELSHANK

TAPERSHANK

0 2544.00 3021.001 2801.00 3186.002 3900.00 4728.003 5667.00 7090.004 9375.00 11167.005 19108.00 20525.006 33718.00 47013.00

WOODRUFF CUTTERS

HSS SOCKET REMAERS TYPE A,B,C

SIZEMM

WOODRUFF CUTTERWIDTH PRICE

16.5 3,4,5 1906.00

19.5 4,5,6 2167.00

22.5 5,6,8 2465.00

28.5 6,8,10 3999.00

32.5 7,8,10 4728.00

BSP SETOF 2 PCS

PRICE

25

HSS PARALLEL SHANK EXTRA LONG TWIST DRILLS PRICE RS. (EACH)

0.5 7300.6 6830.8 4631.0 4521.2 3/64" 452

1/16" 568 6665/64" 578 696

3.0 1/8" 940 1151 1303 1549 1827 22793.5 916 1067 1373 1706 2053 2619 29254.0 5/32" 916 1067 1373 1706 2053 2619 28954.5 939 1151 1373 1706 2156 2697 29685.0 3/16" 939 1157 1487 1826 2295 2858 30295.5 7/32" 1027 1280 1589 1945 2376 3086 30436.0 1027 1337 1636 1980 2419 3109 38956.5 1/4" 1673 2661 3257 38957.0 1857 2829 3681 39487.5 9/32" 1891 2947 3750 41708.0 5/16" 1984 3008 3842 46088.5 11/32" 2047 3008 3912 36899.0 2047 3026 3912 36559.5 3/8" 2156 3110 3998 380210.0 2246 3322 4176 430910.5 13/32" 2321 3437 4332 467711.0 7/16" 3437 4465 463311.5 2900 4465 518012.0 15/32" 3608 4735 5196

12.5 1/2" 3720 4888 5508

MM INCH 50 100 125 150 175 200 225 250 300 350

HSS TAPER SHANK TWIST DRILLS EXTRA LONG IS : 7822-1975

MM INCH 250 275 300 315 325 350 375 400 425 450 475 50013.0 4173 4779 5425 5891 6196 7050 7912 888813.5 4308 4875 5573 6035 6307 7184 8110 911214.0 4450 5021 5674 6157 6408 7325 8276 928714.5 9/16" 4480 5089 5759 6189 6502 7466 8420 9449 11110 12401 13955 1565015.0 4580 5200 5897 6321 6661 7615 8537 9604 11060 12551 14094 1581015.5 4685 5321 5954 6444 6751 7731 8700 9736 11140 12672 14217 1594716.0 5/8" 4804 5411 6074 6536 6873 7842 8836 9903 11371 12890 14391 1612216.5 4888 5482 6189 6661 6981 7988 8998 10143 11543 13026 14538 1622117.0 4992 5615 6254 6740 7075 8110 9119 10255 11680 13188 14678 1637217.5 11/16" 6408 6869 7212 8266 9274 10377 11820 13341 14864 1652618.0 6502 7024 7325 8399 9436 10567 11968 13478 15019 1668518.5 6606 7108 7458 8473 9548 10732 12121 13634 15122 1684619.0 3/4" 6723 7212 7569 8612 9695 10875 12248 13789 15271 1694219.5 6806 7293 7642 8767 9886 11096 12401 13952 15454 1710820.0 6922 7412 7788 8869 10018 11256 12647 14094 15622 1731720.5 7050 7547 7897 9017 10143 11424 12800 14336 15863 1757821.0 13/16" 7176 7458 8032 9211 10353 11611 13075 14580 16154 1785321.5 7325 7821 8166 9372 10552 11832 13270 14888 16445 1821722.0 7485 8030 8399 9548 10732 12031 13478 15120 16708 1850522.5 7/8" 7683 8198 8578 9709 10875 12159 13711 15329 16995 18813

HSS TAPER SHANK TWIST DRILLS EXTRA LONG IS : 7822-1975

23.0 8042 8584 8897 10030 11112 12375 13909 15608 17246 1908723.5 8836 9825 10768 11837 12799 14381 16052 17768 1967324.0 15/16" 8836 9825 10875 11991 13247 14833 16560 18252 2019824.5 9112 10255 11370 12401 13699 15322 17032 18786 2074625.0 10627 11789 12890 14121 15754 17525 19308 2132625.5 1" 12153 13270 14541 16202 17984 19827 2182426.0 12647 13749 15012 16685 18516 20339 2240726.5 13026 14150 15431 17149 18988 20820 2295427.0 1.1/16" 13478 14647 15888 17603 19462 21363 2349027.5 13909 15019 16280 18071 19954 21858 2401828.0 14336 15454 16757 18516 20436 22839 2460028.5 1.1/8" 14799 15910 17173 18948 20932 22916 2510729.0 15214 16346 17642 19425 21431 23401 2567529.5 15635 16757 18059 19889 21888 23930 2623730.0 1.3/16" 16078 17208 18505 20339 22381 24433 26753

MM INCH 300 315 325 350 375 400 425 450 475 500

26

MACHINIST’S FILES Per 10 Pcs.

100 1820 2520 - 2750 3060 2680 2940 2320 3020 3430 3870 4

150 1850 2790 1560 2930 3430 2870 3090 2720 3070 3810 4370 6

200 1860 3180 1570 3880 4380 2960 3440 3050 3550 4840 5690 8

250 1870 3900 1580 5200 5900 3950 4420 3950 4440 6160 7600 10

300 2800 5080 2160 6570 7250 4900 5870 4900 5740 8300 9440 12

350 6490 7530 - - - - - 6890 7880 10370 11860 14

SIZE FLAT Mill THREE SQUARE SQUARE ROUND HALF ROUNDS SIZEMM Bastard Smooth Bastard Bastard Smooth Bastard Smooth Bastard Smooth Bastard Smooth INCH

SQUARE HSS TOOL BITS (BLANKS) RS. EACHHSS TOOL BITS (BLANKS)

CORRESPONDINGSIZE INCH SIZE MM

3/16 " X 3 " 5 X 75 113.00 291.003/16 " X 4 " 5 X 100 148.00 426.003/16 " X 6 " 5 X 150 230.00 904.001/4 " X 3 " 6 X 75 129.00 390.001/4 " X 4 " 6 X 100 150.00 520.001/4 " X 6 " 6 X 150 217.00 845.001/4 " X 8 " 6 X 200 311.00 1443.005/16 " X 3 " 8 X 75 143.00 503.005/16 " X 4 " 8 X 100 183.00 687.005/16 " X 6 " 8 X 150 308.00 1108.005/16 " X 8 " 8 X 200 391.00 1575.003/8 " X 3 " 179.00 591.003/8 " X 4 " 217.00 783.003/8 " X 6 " 338.00 1261.003/8 " X 8 " 462.00 1803.003/8 " X 10 " 595.00 2384.00

10 X 75 199.00 652.0010 X 100 237.00 876.0010 X 150 367.00 1372.0010 X 200 511.00 1929.0010 X 250 648.00 2547.00

1/2 X 3 12 X 75 269.00 968.001/2 X 4 12 X 100 338.00 1263.001/2 X 6 12 X 150 518.00 1991.001/2 X 8 12 X 200 682.00 2779.001/2 X 10 12 X 250 1036.00 3829.005/8 X 4 16 X 100 536.00 2027.005/8 X 6 16 X 150 792.00 3127.005/8 X 8 16 X 200 1073.00 4390.003/4 X 4 743.00 2930.003/4 X 6 1087.00 4309.003/4 X 8 1485.00 5908.00

20 X 100 811.00 3209.0020 X 150 1183.00 4808.0020 X 200 1618.00 6404.00

1 X 6 25 X 150 1831.00 7229.001 X 8 25 X 200 2489.00 9614.00

M2 T4210% COBALT

TERMS AND CONDITIONS :Delivery : Ex-our office,Ahmedabad, Packing forwarding extra, cartage will be charge extra from our office on

topay basisPrices : 1. The prices are ex our office inclusive of exicse duty and VAT extra as applicable.

2 Prices are subject to our final confirmation and change without notice .3. Payment Cash / Cheque / DD on demand4. This cancell all our previous price lists.5. Subjest to Ahmedabad Jurisdiction only

HSS COUNTER SHANK WITHTAPER SHANKBS-122:PART2:1964

(INCLUDED ANGLE 60 OR 90)

BODY PRICE BODY PRICEDIA RS. DIA RS.INCH EACH INCH EACH

1/2* 1946.00 1.3/8 8848.001.1/2 10486.00

5/8* 2585.00 1.3/4 15506.003/4 2928.00 2 18069.007/8 3697.00 2.1/4" 20485.001* 4652.00 2.1/2" 25423.001.1/8* 6013.00 2.3/4" 30007.001.1/4 7568.00 3 36290.00

Branch Office : GF/C-28/29, Sumel-7, Business Park, Near Rakhial Fly Over, Rakhial, Ahmedabad, Gujarat. India Ph.: (O) 7878128174, 22710940Email : [email protected]

Documents

PRICE LIST EFFECTIVE FROM 01-01-2019 HT - Hetaltools2 ht dia th hole grading each/rs. 4. v10 bond for precision grinding of m.s and c.s 300 40 127 ros 190x15 a463,a60 2100-00 350 40