PRESSURE CONTROL EQUIPMENT - Lee · PDF fileproudly manufacturing superior pressure control equipment, production-logging tools, ... wireline skids and trucks, depth tension devices,

w w w . l e e s p e c i a l t i e s . c o m

PRESSURE CONTROL EQUIPMENT

Lee Specialties is committed to designing, manufacturing, and delivering high quality, leading-edge technology, and innovative solutions that consistently meet or exceed our customers and employees expectations.


To become the global innovator in the Wireline Industry by proudly manufacturing superior pressure control equipment, production-logging tools, logging systems, and associated equipment. We will realize this vision by providing our quality products and advanced solutions for our customers to enable their success while meeting or exceeding health, safety, and environmental obligations and responsibilities.

• Integrity

• Quality

• Innovation

• Optimism

• Team Work

• Creativity

• Resourcefulness

• Social Responsibility


At Lee Specialties we design, manufacture, and service wireline equipment.

Established in Red Deer, Alberta, Canada in 1999, Lee Specialties employs more than 160 individuals

spanning the gamut of vocations from skilled trades-people to professionals. In 2010, Lee Specialties

proudly expanded our operations to the USA with three facilities: a main office/manufacturing facility in

Houston, TX; one equipment rental facilities in Yorktown, TX; and another rental facility in Youngsville, LA.

We offer a wide range of wireline related products including pressure control equipment, production

logging tools, wireline skids and trucks, depth tension devices, and associated equipment.

Our professional approach to meeting your needs includes on-call customer support, custom designs and

product development, meticulous quality control standards, and on-site test facilities. To best serve our

clients, we also provide a full-service rental shop for pressure control gear and related equipment.

We design and test our products to withstand extreme weather conditions. The ability of our equipment

to perform under these conditions confirms reliability and durability making all the difference when it

comes to performance.

Lee Specialties is a leader in the Wireline Industry. We proudly serve the national and international markets

by providing superior customer service and innovative quality products.

Company Overview

PRESSURE CONTROL EQUIPMENT

2

Description

Packoff

Hydraulic Stuffing Box

Designed to confine well fluids and gases during slickline operations

Wipes wireline clean

5K models available in manual or hydraulic configurations

Sheaves available (please specify size when ordering)

Can be fitted with 16” or 20” sheaves

Available in pressure ratings up to 15K

Please specify the following when ordering this equipment:

Required working pressure

Specify union type

Line size(s)

Hose Length

Description

Provides a seal around a static wireline

Confines wellbore fluids and gases

Line rubbers and guides available for various wireline sizes

Line rubbers and guides are easily changed

Available with direct or union connections


A hydraulic Stuffing Box is used in slickline operations and is located at the top of the pressure control stack. It confines well fluids and gases to a well and its pressure control stack. Stuffing Box packing wipes line clean as it travels out of the stack.

Accessories

Test plug

Lubricator Wrench

Hydraulic hand pump & hose

Seal kit

A Packoff provides a seal around a static wireline to confine well fluids and gases to a well and pressure control stack. Lee Specialties Packoffs are compatible with most wireline sizes. They are available in a variety of threaded connections or with our proprietary direct connection, which allows for quick connection between a Lee Specialties Packoff and Grease Head.

Accessories

Test plug

Lubricator Wrench


Seal kit



Specify union type

Line size(s)

Hose length

3 w w w . l e e s p e c i a l t i e s . c o m

Grease Control Head

Maintains a seal around wireline when a grease injection system is used

Prevents escape of wellbore fluids

Grease seal is achieved by pumping a viscous fluid between the wireline and grease tube

Grease tubes are available in various sizes for slickline & braided line

Sections can be added or removed to compensate for pressure variations

Bottom sub contains a velocity check valve


Description

The Grease Control Head maintains a grease seal around static (stationary) or dynamic(moving) wireline to prevent the escape of potentially harmful wellbore fluids and gases. A grease seal is achieved by pumping viscous fluid through the space between the inner diameter of grease flow tubes and the outer diameter of wireline. The fluid pumped into a grease control head is controlled by a grease injection system.

Accessories

Test plug

Lubricator Wrench


Seal kit

High pressure hose

Grease tubes



Specify union type

Line size(s)

Hose length

4

Linewiper/Packoff

Packoff section provides seal around static cable

Wiper section drains fluids to containment system

Line rubbers and guides available for various wireline sizes

Line rubbers and guides are easily changed

AccessoriesDescription

The Packoff section of the Linewiper/Packoff acts as a type of well control by providing a grease assisted, rubber seal around a wireline. This seal helps restrict wellbore fluids and gases beneath it.

The Linewiper section uses a soft rubber seal to strip wellbore fluids from wireline traveling through it. These waste fluids are returned to an appropriate containment system by way of a waste drainage hose.

Test plug

Lubricator Wrench


Seal kit

Waste return hose

Linewiper piston design prevents the wiping element from over-energizing, which causes line damage

7

Linewiper positioned above Packoff where it is not subjected to well bore pressure

8

Both Linewiper/Packoff pistons are above sealing elements with no danger of being energized by well bore pressure. NOTE: Packoff should not be engaged when line is moving

9

Dedicated waste grease return port 4

Packoff positioned at bottom where well bore pressure containment needs to be

10

11 Integrated velocity ball check valve

Linewiper Upper Line Guide 1

One-Piece Soft Rubber 2

Linewiper Upper Line Guide Bushing

3

Two-Piece Hard Rubber 5

Packoff Bottom Line Guide 6



Specify union type

Line size(s)

Hose length


Chemical Injection (Purging) Sub

Multiple Uses

Allows for pumping of nitrogen into a lubricator to displace oxygen and/or hydrocarbons

Allows for injection of de-icing agent into a lubricator plugged with ice or a hydrate

Allows for injection of solvent or other substance into a waxy oil well to reduce viscosity

Description

Head Catcher

“Catches” cable head to prevent loss of tool string

Mechanical latch is always in the “Catch” position - must be hydraulically activated to release the cable head

Available pressure ratings up to 15K

Fits cable head sizes of 3/4” to 17/8”

Tool String Weight - 2500 lbs


Direct connection to Grease Head available


Specify union type

Hose length

Description

Lee Specialties Chemical Injection Subs perform two tasks. They allow for injection of fluids such as a de-icing agent or corrosion inhibitor into the well, and they allow for purging of air pressure from a pressure control stack.

Accessories

Test plug

Lubricator wrench


The Lee Specialties Head Catcher is a multiple tool/size, cable head catcher. It is durable, easy to use and simple to maintain. It is usually installed above the lubricator in a pressure control stack.

Accessories

Test plug

Lubricator wrench


Seal kit

Seal kit

Test plug & cap

High pressure hose



Specify union type

Hose length

6

Tool Trap

Lubricator

Allows a tool string to be completely contained within the pressure control stack

Available with pump-in/bleed-off ports

Variety of lengths and options

10K lubricator available in lightweight versions

Available in most sizes and pressure ratings

Prevents loss of tool string down hole

Installed below lubricator

Remote hydraulic and manual models available

Equipped with carrying handles that also protect hydraulic components

Available in 3”, 4”, 5”, 6 5/8” IDs

Available in 5K, 10K , 15K


ID (inner diameter)


Specify union type

Length (lubricator)

If bleed-off port is required (lubricator)

Description

The Lee Specialties Tool Trap prevents loss of a tool string down hole if wireline is parted with the Cable Head. It is normally installed between the lubricator and the blowout preventer in a pressure control stack. Manual and hydraulically actuated models are available. The hydraulic model allows for operation of the tool from a remote location.

Accessories

Test plug

Lubricator Wrench


Seal kit

Description

Lubricators are high pressure pipe that connect to the top of a well. They allow for delivery of wireline tools into a well bore. The lubricator sections must be long enough to contain the entire tool string.

Accessories

Test plug

Lubricator Wrench


Seal kit

Lubricator clamp

Stand



Specify union type

Hose Length


Designed to increase productivity of multiple run wireline jobs

Saves time by eliminating the need to re-pressure test an entire pressure control stack

Hydraulic pressure is applied between two O-rings to test the integrity of a broken connection

Valve can be closed and operations can continue once the connection passes the pressure test

Available in most IDs and pressure ratings


ID (inner diameter)


Specify union type

Hose length

Quick Test SubDescription

The Lee Specialties Quick Test Sub facilitates changes to a tool string by enabling the pressure control stack integrity to be quickly retested. Modifications to a multiple run tool string, completed with the assistance of a Lee Specialties Quick Test Sub, are quicker than standard changes because the entire pressure control stack does not need to be re-tested.

Accessories

Test plug

Lubricator Wrench


Seal kit

Valve wrench

8

Used for a variety of purposes

Bleed-off or pump-in

Available in most sizes and pressure ratings

Studded or Acme style side ports available

Flow Tee/Pump-In-SubDescription

A Pump-In-Sub (Flow-T) is normally placed below a BOP. It allows for bleeding off of well gases and fluids from a pressure control stack. The Pump-In-Sub assists in introduction of fluids to a well for well control purposes. It is also used to direct flow away from the pressure control stack.

Accessories (Flanged Port)

Test plug

Lubricator Wrench


Seal kit

Hammer wrench

Studs & nuts

Plug Valve

Flanged Pump-In Sub

Attach directly to a wellhead to pump in or bleed off fluids

Available in most IDs and pressure ratings

Studded or Acme style side ports available

Description

Accessories

Test plug

Lubricator Wrench


Seal kit

Flange studs & nuts

Plug Valve

Ring Gasket

Adapter Options

2” NPT Adapter

Weco Hammer Union Adapter

Plug

Plug with 1/2” NPT Port

Adapter Options

2” NPT adapter

Weco hammer union adapter

Plug

Plug with 1/2” NPT port



Specify union type

Accessories (2” Port)

Test plug

Lubricator Wrench


Seal kit


Connects pressure control equipment of different connection types Provide a way to connect equipment of different sizes

Available for NPT, EUE, NUE, or casing

Working pressure of 5000 psi and lowerPlease specify the following when ordering this equipment:

ID (inner diameter)


Union type

For crossovers please specify which end is “up”

Crossovers SwedgesDescription Description

10


BLOWOUT PREVENTERS

12

Description

Manual BOPs

Mechanically operated actuators

Lightweight

Low-maintenance

Equalizing and bleed-off valves

Available in most IDs and up to 10K pressure ratings

Not recommended for high-pressure operations


ID (inner diameter)


Rams required

Union type

Line size(s)

A Manual Blow out Preventer (BOP) is used to prevent uncontrolled well flow. Manual BOPs are best used in situations where opening and closing of rams is infrequent and where the well pressure ranges from 0 to 10,000 psi.

Accessories

Lubricator wrench

Valve ratchet

BOP stand

Night cap

Test plug

BOP seal kit

Ram block assembly


FeaturesAluminum thread protectors

Intergrated lifting points

Bumpers to protect BOP body

Durable powder-coat or painted finish available

Mono block forging

Easily accessible equalizing and bleed-off valves

Superior equalizing assembly

12

3

4

5

6

7

14

Hydraulically operated actuators with manual backups

Equalizing and bleed-off valves installed

Quick change hydraulic couplers

Recommended for high pressure or where frequent actuation is necessary

Tandem, triple, and quad BOPs with IDs over 4 in. (10.2 cm) utilize locking lug hydraulic actuators with guides and rails

NOTE: Stands are required for all blowout preventers

Hydraulic Wireline BOPs

Description


ID (inner diameter)


Number of actuators

Type of Rams required

Union type

Line size(s)

A hydraulic BOP is used to prevent well flow. A hydraulic BOP is functioned remotely by way of a hydraulic system acting on the actuators. Two-way connections facilitate opening and closing of the BOP ram blocks. A Lee Specialties hydraulic BOP allows for manual actuation should the hydraulic system fail.

Accessories

Seal kit

Ring gasket

Flange studs & nuts

BOP stand

Hammer wrench

Fireguard hydraulic bridal hoses (for coil tubing)

Lubricator wrench

Actuator lock-in handle

BOP test rod

Valve ratchet wrench

Night cap

Ram block assembly

Test plug & cap

Plug Valve


Hydraulic actuator sliding arms to service/replace rams

Carbide ball seat for superior sealing in equalizing and bleed-off valves

Bumpers to protect BOP’s valves and body

Monoblock forging

Easily accessible equalizing and bleed-off valves

Durable powder-coat or painted finish available

Bleed-off /Grease injection mainfold

External piston indicator

Manual backup actuators

Aluminum thread protectors1

2

13

11

10

9

87

4

3

6

Intergrated lifting points

Invertable rams to suit operations5

Hydraulic actuator lug lock design to allow quick and easy access to rams

12

16

Shear/blind upper ram combination

Pipe/slip lower ram combination

Hydraulic actuators with manual backups/locks

Bleed-off/equalizing valve system

Studded flange top and bottom connections

Studded flange side connections

Innovative system of rails and guides

NOTE: Available in most IDs and pressure ratings

Tandem Coiled-Tubing BOPs

Description

Hydraulically actuated coiled tubing BOPs require hydraulic pressure to open and close the rams. This feature allows for safer operation from a location removed from the pressure stack and wellhead. The hydraulic supply system can be a two-way hydraulic hand pump or an accumulator system.

Accessories

Seal kit

Ring gasket

Flange studs & nuts

BOP stand

Hammer wrench


Lubricator wrench


BOP test rod


Night cap

Ram block assembly

Test plug & cap

Plug Valve


ID (inner diameter)


Number of actuators

Type of rams required

Union type

Tubing size(s)


Blind, shear, slip, and pipe rams (top to bottom configuration)

Hydraulic actuators with manual backups/locks

Bleed-off/equalizing valve system

Studded flange top and bottom connections

BX-152 studded flange side connection

Innovative system of rails and guides

3.063 in. quad BOP utilizes locking lug actuators to quickly change ram blocks

NOTE: Available in most IDs and pressure ratings

Quad Coiled-Tubing BOPs

Description

Accessories

Seal kit

Ring gasket

Flange studs & nuts

BOP stand

Hammer Wrench


Lubricator wrench


BOP test rod


Night cap

Ram block assembly

Test plug & cap

Plug Valve


ID (inner diameter)


Number of actuators

Type of rams required

Union type

Tubing size(s)

18

Flanges & Spools


Replacement Valves

Replacement valves for all Lee Specialties BOPs

Bleed-off valves can relieve pressure or be used as injection points

High-pressure applications - 15,000+ psi

Description

Lub Lifting Clamp & Sheave/Lub Hanger

Strong assembly provides safe method to lift lubricator onto pressure stack

Available for all lubricator sizes

Description

20

Transport SkidsDescription

Transport Skids contain pressure control equipment and/or tools on a single skid to facilitate easy and organized transportation. The four-point lift system enables movement of Transport Skid with a crane or picker truck, while forklift pockets allow for movement of the skid by a forklift or loader. Transport skids can be customized to suit specific applications and needs.


Mounting structures for all pieces in pressure stack

BOP stands

Lubricator rack

Tool boxes and/or storage compartments

Tie-downs

Features

Tool boxes

Lubricator dividers

Ratchet straps

Flange rubbers

Two leg, four-point cable slings

DNV Certified 2.7-3

Four-point lifting brackets and forklift pockets

Powder-coated or painted customer colors

DNV certification available

22

Slickline Stack Configuration

Sheave

Head Catcher

Chemical Injection Sub

Stuffing Box

Lubricator

Bleed-Off

Quick Test Sub

Tool Trap

Hydraulic BOP

Pump-In-Sub/Flow T

Adapter Flange/Swedge


E-Line Stack Configuration

Packoff/ Packoff-Line Wiper

Grease Head

Head Catcher

Chemical Injection Sub

Lubricator

Quick Test Sub

Tool Trap

Hydraulic BOP

Pump-In-Sub/Flow T

Adapter Flange/Swedge

24

Our affiliate company, Lee Specialty Seals, can outfit you with all the seals and accessories for your pressure control equipment.

24 Hour On-Call Service 1.403.356.1127

BOP Seals

Shear Blinds

Packoff Rubbers/Oil Savers

Stuffing Box Packing

Swab Cups

O-Rings

Poly-Pak Seals

Ring Joint Gaskets

Gasket and Rubber Sheeting

Studs, Nuts, Bolts

Vee Packing Moly/ Nitrile Kevlar

And More...

www.leespecialtyseals.com

25

PRESSURE CONTROL SKIDS

26

Lee Specialties grease injection systems are designed to operate in the most extreme environments and under the most difficult well conditions. Equipped with Lee Specialties intensifier pumps, live hydraulic swivels, and high-pressure hydraulic manifolds, Lee Specialties grease injections systems are comprised of superior craftsmanship. High profile jobs become routine when you combine our grease injection systems with our pressure control equipment. The engraved stainless steel control panel and purely mechanical design assure trouble-free operation. The self-contained diesel driven system provides a consistent rate of grease regardless of well pressure. This is an advantage over air operated systems, which reduce volume as pressure increases.

Grease Injection Systems

27

28

High Pressure Intensifier PumpsLee Specialties designs and manufactures three high-pressure, hydraulically driven fluid pumps. These pumps are capable of pressures ranging from 1000 - 20,000 PSI.

29

30

Dual 20K Grease Injection System

Working pressure of 22,500 psi (137.9 MPa)

5K and 10K also available

-40°F to +104°F (-40°C to +40°C)

LengthWidthHeight

132.5 in. (336 cm)78 in. (198 cm)

77.5 in (197 cm)

Two fully independent grease injection systems operated from one integrated control panel

Grease supply and return adjustable through 20,000 psi (137.9 MPa) manifold (tested at 30,000 psi)

Design to work in tandem with the Hose Reel Transport Skid

Description

Operating Ranges

Two 4-cylinder, 47 HP, water-cooled, diesel engines with block heater and air shutoff valve

Engines

The Dual 20K Grease Injection System is a diesel drive, hydraulically operated system. It contains a Lee Specialties custom designed intensifier pump, hydraulic manifolds and demonstrates superior craftsmanship.

Specifications


Two Lee Specialties 20K intensifier style grease pumps

Grease pre-charge pump

250:1 air intensifier backup

Modular hand pump/reservoir system for operation of Packoff, Linewiper, Head Catcher, Tool Trap

Pumps

Accumulator System

Two 10 gal (41.6 L) 3,000 psi accumulator bottles

Hydraulic accumulator controls and connections for quad BOP operation

Fluid Tanks

Split grease tank - 115 US gal (435 L) + 82 US gal (310 L)

Two 49 US gal (186 L) hydraulic fluid tanks

Two 19 US gal (75 L) fuel tanks

Construction

Stainless steel, engraved control panel

Four-point lifting and forklift pockets

Dash and working lights

Spill containment floor pans

32

Lee Specialties 15K hydraulically powered, reciprocating high-pressure pump


Pneumatic grease pump for backup

Four single hand pumps for Packoff, Linewiper, Head Catcher, and Tool Trap operation

Description

The 15K Hydraulic Grease Injection System is a diesel driven, hydraulically operated system. It contains a Lee Specialties custom designed intensifier pump, live hydraulic swivels, high pressure reel swivels, high pressure manifolds and demonstrates superior craftsmanship.

Pumps


LengthWidthHeight

111 in. (282 cm)62 in. (156 cm)70 in. (178 cm)

Working pressure of 17,500 psi (120.7MPa)

-40°F to +104°F (-40°C to +40°C)

Operating Ranges

Engine

Four-cylinder, 47 HP, water-cooled, diesel engine with block heater and air shutoff valve

Specifications

15K Hydraulic Grease Injection System

Four 5 US gallon, nitrogen charged, bladder accumulator bottles

Controls and connections for quad BOP operation

Accumulator System

75 US gal (284 L) split grease tank

53 US gal (201 L) hydraulic tank

22.5 US gal (87 L) fuel tank

Fluid Tanks




Spill containment floor pan

Sand blasted and powder coated

Construction

175 ft (53.3 m) for grease supply and return

175 ft (53.3 m) hydraulic lines for Packoff, Linewiper, Head Catcher, and Tool Trap (125 ft)

125 ft (53.3 m) hydraulic lines for quad BOP

All hose mounted on hydraulically driven reels

Grease pressure hose reels equipped with 15K high-pressure swivels

Grease flow adjusted through a master valve block

Hose

34

Lee Specialties 10K hydraulically powered, reciprocating high-pressure pump



Four single hand pumps for Packoff, Linewiper, Head Catcher, and Tool Trap operation

Description

The 10K Hydraulic Grease Injection System is a diesel drive, hydraulically operated system. It contains a Lee Specialties custom designed intensifier pump, live hydraulic swivels, high pressure reel swivels, high pressure manifold, demonstrating superior craftsmanship.

Pumps


LengthWidthHeight

111 in. (282 cm)62 in. (156 cm)70 in. (178 cm)

Maximum working pressure of 12,500 psi (86.2 MPa)

-40°F to +104°F (-40°C to +40°C)

Operating Range

Three-cylinder, 35 HP, water-cooled, diesel engine with block heater and air shutoff valve

Engine

Specifications


Four 5 US gallon, nitrogen charged, bladder accumulator bottles

Controls and connections for triple BOP operation

Accumulator System



22.5 US gal (87 L) fuel tank

Fluid Tanks





Sand blasted and powder coated

Construction


175 ft (53.3 m) ft hydraulic lines for Packoff, Linewiper, Head Catcher, and 125 ft Tool Trap

125 ft (53.3 m) hydraulic lines for triple BOP




Hose

36

LengthWidthHeight

70.5 in. (163 cm)47.5 in. (112 cm)

64 in. (135 cm)



175 ft (53.3 m) hydraulic line for packoff


Grease pressure hose reels equipped with high pressure swivels


Hose



20 US gal (76 L) fuel tank

Fluid Tanks


4 point lifting and forklift pockets



Sand-blasted and powder-coated

Construction


-40°F to +104°F (-40°C to +40°C)

Operating Range


Engine

Lee Specialties 5K Hydraulically powered, reciprocating high-pressure pump

Operating temperature range of -40°F to +104°F (-40°C to +40°C)



Single piston modular hand pump for packoff

Pumps

Specifications

Description

The 5K Hydraulic Grease Injection System is a diesel drive, hydraulically operated system. It contains a Lee Specialties custom designed intensifier pump, live hydraulic swivels, high pressure reel swivels, high pressure manifold demonstrating superior craftsmanship.


LengthWidthHeight

52 in. (132 cm)43 in. (109 cm)49 in. (124 cm)

10K Air Powered Grease Injector

44 US gal (166.5 L) grease tank

3.5 US gal (13.25 L) air tank

Fluid/Air Tanks


4 point lifting and forklift pockets



Construction


-40°F to +104°F (-40°C to +40°C)

Operating Range

Two 10K pneumatic grease pumps

Pumps



175 ft (53.3 m) hydraulic lines for tandem BOP

Hose

Specifications

Description

An external air source is required to run the air intensifier pumps. The air source couples to the air intake port where air is filtered and regulated. The skid’s dual pump configuration provides an auxiliary method of ensuring grease delivery.

38

LengthWidthHeight

70 in. (178 cm)65 in. (165 cm)66 in. (167 cm)

Hose Reel Transport Skid

Hydraulically controlled hose reels

125 - 175 ft. (53.3 m) of hose can be installed in each reel depending upon hose dimension and/or quantity

Operate reels and regulate hydraulic source from the main control panel

Requires external hydraulic source (not included)

Description

Specifications

The Lee Specialties Hose Reel Transport Skid is designed to store and transport multiple types and lengths of hose safely and conveniently. It is recommended for jobs that require a variety of hoses for grease injection and the operation of various pressure control equipment.


Hydraulically powered, reciprocating high-pressure pump

Maximum continuous operating pressure of 22,500 psi (155.2 MPa)

1.4 US gpm (5.3 L) @ 60 spm

12.6:1 intensification ratio



0.6 US gpm (2.3 L) @ 60 spm



Custom lengths available

10K Pressure Pump & Motor

Pumps


4.6 US gpm (17.4 L) @ 60 spm



1K High-Volume Pump & Motor


0.6 US gpm (2.3 L) @ 60 spm



Custom lengths available

Tank-Mounted 10K Pump & Motor

15/20K High-Pressure Pump

40

LengthHeightWidth

65.5 in. (166 cm)45.3 in. (115 cm)

53 in. (135 cm)

20 Gallon Hydraulic Accumulator With Optional Nitrogen Backup & Remote Panel

Operating Range

-40°F to +104°F (-40°C to +40°C)

Engine

Three-cylinder, 21 HP, water-cooled, diesel engine with block heater and air-shutoff valve

Hose

125 ft (53.3 m) hydraulic hose for quad BOP operation

Fluid Tanks

53 US gal (200.6 L) hydraulic tank

18 US gal (68.1) fuel tank

Specifications

Description

The 20 Gallon Hydraulic Accumulator Skid is used to provide a reliable source of hydraulic supply to actuate blowout preventer (BOP) rams at any time.

A diesel engine powers the system hydraulic pump. The pump charges four 5 US gallon accumulator bottles that are connected in series for redundancy and to provide sufficient volume for multiple BOP ram actuation.


Accumulator System

Four 5 US gallon nitrogen charged, bladder accumulator bottles

Hydraulic controls and connections for quad BOP operation

5 US gallon nitrogen tank for emergency use

Electric remote panel allows accumulator operation from a distance of 150 ft (45.7 m)

Construction


Four point lifting system and forklift pockets




42

(10K, 15K, 20K) Hydraulic Pressure Tester

Operating Ranges

Maximum working pressure of 17,500 psi (121 MPa)

-4°F to +104°F (-20°C to +40°C)

Engine


Lee Specialties hydraulically powered, reciprocating High-Pressure pump Lee Specialties 1K High-Volume Fill Pump Centrifugal type charge pump 5K Hydraulic hand pump for functioning of miscellaneous equipment

Description

The 15K Hydraulic Pressure Tester is used for safe and efficient hydrostatic pressure testing of wellhead equipment in the shop or field. This skid is also available in 10K and 20K configurations.

126 US gal (477 L) fluid tank (stainless steel)



Stainless steel or sand-blasted with powder-coat finish skid construction


Four-point lift system and forklift pockets



Linewise with laptop mount

Construction

Specifications

LengthWidthHeight

106.9 in. (271.5 cm)54.5 in. (138.4 cm)71.4 in. (181.4 cm)

Hose

175 ft (53.3 m) for pressure supply and return

175 ft (53.3 m) hand pump hydraulic line

All hoses mounted on hydraulically driven reels

Pressure hose reels equipped with 15K pressure swivels

Tanks

126 US gal (477 L) fluid tank (stainless steel)




10K, 15K and 20K configurations available

Temperature range dependent upon testing fluid

Two air-driven liquid pumps

Relief valve bleeds off excess fluid

Differential pressure recorder

100 ft high pressure supply hose (30.48 m)

Second reel for air supply hose

14 US gal (53 L) fluid tank

LengthWidthHeight

32 in. (81.3 cm)32 in. (81.3 cm)

43 in. (109.2 cm)

Air Powered Pressure Tester

Description

Specifications

The Air Powered Pressure Testers are a compact and durable device used for safe and efficient hydrostatic pressure testing of wellhead equipment in the shop or field.

44

LengthWidthHeight

56 in. (142 cm)18 in. (46 cm)26 in. (66 cm)

Lightweight, portable unit provides hydraulic supply for BOP rams and other pressure gear - light-duty use

Manual foot pump provides systems pressure as a safety back up

5 US gal (18.9 L) hydraulic fluid reservoir

2.5 US gal (9.46 L) accumulator bottle

Dual hand pump

Hard plumbing

Stainless steel construction

Portable Accumulator

Specifications

The Portable Accumulator is used to maintain a constant hydraulic pressure and volume reserve to hydraulically operate various combinations of wireline equipment in remote locations. The portable unit provides centralized controls for hydraulically operated BOPs, the Head Catcher, Tool Trap, and dual Hand Pumps to operate the Stuffing Box and Linewiper functions. The unit is operated by providing pressurized air to an air driven hydraulic pump that will build the hydraulic output pressure proportionate to air input pressure at a ratio of 1:40.

Description


Lightweight construction

Pressure tests equipment in the field or in shop (light-duty use)

Working pressures up to 22,500 psi (155.2 MPa)

Two pumps and multiple outputs as required

Optional Linewise box for data logging

Direct connect high-pressure hose coupling(s)

Steel or stainless steel frames

LengthWidthHeight

20 in. (50.8 cm) +20 in. (50.8 cm)

24 in. (61 cm)

Portable Pressure Tester

Specifications

The 15K Portable Pressure Tester is a compact device used for safe and efficient hydrostatic pressure testing of wellhead equipment in the shop or field. Stainless steel construction ensures durability.

Description

46

Quick-Couplers

Quick couple/uncouple

No tools required - hand-tight is enough

Zero leakage

High durability

LengthWidthHeightMax. WP

2.25 in. (5.7 cm)2.25 in. (5.7 cm)4.4 in. (11.2 cm)

10,000 psi (69 MPa)

LengthWidthHeightMax. WP

2.375 in. (6 cm)2.375 in. (6 cm)6.1 in. (15.5 cm)

30,000 psi (207 MPa)

Provides a connection between stationary and rotating equipment - i.e. grease pump to hose reel

Near frictionless movement

Maintenance-free operation

Commonly used on grease injection or pressure testing skids for grease/pressure send/return lines

Working pressures from 10,000 psi (69 mPa) to 30,000 psi (206 mPa)

Accessories

Pressure Swivels

SpecificationsSpecifications


LengthWidthHeight

6.75 in. (17.1 cm)4.875 in. (12.4 cm)

6 in. (15.2 cm)

LengthWidthHeight

4.77 in. (11.4 cm)4.875 in. (12.4 cm)

3 in. (7.6 cm)

Compact and extremely durable

Six port, 9/16 in. autoclave construction

Five valves to control flow input/output

Optional two valve addition block

Bonnet valves can be opened or closed to control fluid flow path

Ratchet wrench provided for valve operation

Connect one or more inputs and redirect to multiple outputs

Combine multiple inputs to increase output volume

Combine manifold blocks to increase input/output configurations

Working pressure of 22,500 psi (155.2 MPa)

High-Pressure Manifold Blocks

Specifications Specifications

48

LengthWidthHeightReservoir

22.25 in. (56.5 cm)2 in. (5.1 cm)

8.75 in. (22.2 cm)120 in³ (2 L)

LengthWidthHeightReservoir

15.25 in. (38.7 cm)5.625 in. (14.3 cm)9.25 in. (23.5 cm)

300 in³ (4.9 L)

Available in tandem or single configurations

3/4 in. (19 mm) piston for 3,000 psi (20.7 MPa)

5/8 in. (16 mm) piston for 5,000 psi (34.5 MPa)

3/8 in. (10 mm) NPT threaded outlets

Hydraulic selector valve (for BOP operation) optional on single pump

High-pressure options when installed on skids

Hand Pumps

Specifications Specifications


Accessories

2X90N-04V14

Jacket ColorIDODMax. WPMin. BurstMin. BendWeightEnd Fittings

Red0.25 in. (6 mm)

0.53 in. (13 mm)18,560 psi (128 MPa)46,400 psi (320 MPa)

1.57 in. (40 mm)0.19 lb/ft (0.28 kg/m)

1/4 in. NPT Male or9/16 in. Type “M” Female Swivel


Red0.5 in. (13 mm)

0.91 in. (23 mm)15,950 psi (110 mPa)39,875 psi (275 mPa)

3.15 in. (80 mm)0.54 lb/ft (0.8 kg/m)1/2 in. NPT Male or

1 in. Type “M” Female Swivel


Grey0.25 in. (6 mm)0.5 in. (13 mm)

23,780 psi (164 MPa)59,450 psi (410 MPa)

6.1 in. (155 mm)0.2 lb/ft (0.33 kg/m)

1/4 in. Type “M” Male or9/16 in. Type “M” Female Swivel


Grey0.5 in. (13 mm)

0.88 in. (22 mm)20,400 psi (140.7 MPa)51,000 psi (351.7 MPa)

7.87 in. (200 mm)0.63 lb/ft (0.94 kg/m)

1 in. Type “M” Female Swivel

2388N-08V14

2440N-04V37

2440N-08V37

Lee Specialties also carries a full range of hydraulic hoses, couplings, and adapters to suit any requirement you may have.

50


Wireline equipment built

by Wireline SpecialiStS…

innovative DeSignS & SolutionS

tranSforming iDeaS

into reality...

1-403-358-1679Rentals Red Deer, AB, Canada

1-337-856-0070Rentals Youngsville, LA, USA

1-361-564-2907Rentals Yorktown, TX, USA

wireline EQUIPMENT


[email protected]

Wireline equipment built

by Wireline SpecialiStS…

52

© Lee Specialties 2012

CANADA - Head Office & Manufacturing7739 Edgar Industrial Way, Red Deer, AB, CANADA T4P 3R2Tel: 1 (403) 346-4487 Fax: 1 (403) [email protected]

USA - Main Office & Manufacturing 5119 Hiltonview Drive, P.O. Box 691693Tel: (281)519-1719800 number: (866) 243-9705Fax: (281) 587-0865Houston, TX, USA [email protected]

USA - RentalsYorktown, TX 78164 USA - Tel: 1 (361) 564-2907Youngsville, LA 70592-5576 USA - Tel: 1 (337) 856-0070

Documents

PRESSURE CONTROL EQUIPMENT - Lee · PDF fileproudly manufacturing superior pressure control equipment, production-logging tools, ... wireline skids and trucks, depth tension devices,