Upload
others
View
12
Download
0
Embed Size (px)
Citation preview
© Copyright Varco International Inc, © Copyright Varco International Inc, 20022002 www.elmarwww.elmar.co.uk.co.uk
SS
44
PRESSURE CONTROLPRESSURE CONTROL
EQUIPMENTEQUIPMENT
Section 4:Section 4: PPrreessssuurre e CCoonnttrrool l EEqquuiippmmeenntt PPaaggeeSection 4Section 4
Slickline Pressure Control Equipment:Slickline Pressure Control Equipment:
SSlliicckklliinne e PPrreessssuurre e CCoonnttrrool l EEqquuiippmmeennt t SSttrriinngg 11
WWeellllhheeaad d AAddaapptteer r FFllaannggee 22
PPuummpp--iin n SSuubb 33
SSiinngglle e SSiillvveer r SSeerriiees s WWiirreelliinne e VVaallvvee 44
DDuuaal l GGoolld d SSeerriiees s WWiirreelliinne e VVaallvvee 55
LLiigghhttwweeiigghht t WWiirreelliinne e VVaallvvee 66
QQuuiicck k TTeesst t SSuubb 77
HHyyddrraauulliic c TTooool l TTrraap p wwiitth h EExxtteerrnnaal l IInnddiiccaattoorr 88
WWiirreelliinne e LLuubbrriiccaattoor r wwiitth h IInntteeggrraal l UUnniioonnss 99
WWiirreelliinne e LLuubbrriiccaattoor r wwiitth h SSccrreewweed d UUnniioonnss 1100
BBlleeeedd--OOfff f SSuubb 1111
LLiigghhttwweeiigghht t LLuubbrriiccaattoorr 1122
CChheemmiiccaal l IInnjjeeccttiioon n SSuubb 1133
HHyyddrraauulliic c WWiirreelliinne e TTooool l CCaattcchheerr 1144
QQuuiicckk--IInntteerrcchhaanngge e TTooool l CCaattcchheerr 1155
HHyyddrraauulliic c SSttuuffffiinng g BBooxx 1166
MMaannuuaal l SSttuuffffiinng g BBooxx 1177
LLiigghhttwweeiigghht t SSttuuffffiinng g BBooxx 1188
LLiiqquuiid d SSeeaal l SSlliicckklliinne e CCoonnttrrool l HHeeaadd 1199
© Copyright Varco International Inc, © Copyright Varco International Inc, 20022002 www.elmarwww.elmar.co.uk.co.uk
SS
44
PRESSURE CONTROLPRESSURE CONTROL
EQUIPMENTEQUIPMENT
Section 4:Section 4: PPrreessssuurre e CCoonnttrrool l EEqquuiippmmeenntt PPaaggeeSection 4Section 4
Electric Line Pressure Control Equipment:Electric Line Pressure Control Equipment:
Electric Electric Line Line Pressure Pressure Control Control Equipment Equipment String String 2020
LLiigghhttwweeiigghht t PPrreessssuurre e CCoonnttrrool l EEqquuiippmmeennt t SSttrriinngg 2211
WWeellllhheeaad d AAddaapptteer r FFllaannggee 2222
PPuummpp--iin n SSuubb 2233
CCoommppaacct t WWiirreelliinne e VVaallvvee 2244
LLiigghhttwweeiigghht t WWiirreelliinne e VVaallvvee 2255
QQuuiicck k TTeesst t SSuubb 2266
HHyyddrraauulliic c TTooool l TTrraap p wwiitth h EExxtteerrnnaal l IInnddiiccaattoorr 2277
WWiirreelliinne e LLuubbrriiccaattoor r wwiitth h IInntteeggrraal l UUnniioonnss 2288
WWiirreelliinne e LLuubbrriiccaattoor r wwiitth h SSccrreewweed d UUnniioonnss 2299
BBlleeeedd--OOfff f SSuubb 3300
LLiigghhttwweeiigghht t LLuubbrriiccaattoorr 3311
CChheemmiiccaal l IInnjjeeccttiioon n SSuubb 3322
HHyyddrraauulliic c WWiirreelliinne e TTooool l CCaattcchheerr 3333
QQuuiicckk--IInntteerrcchhaanngge e TTooool l CCaattcchheerr 3344
WWiirreelliinne e GGrreeaasse e IInnjjeeccttiioon n CCoonnttrrool l HHeeaadd 3355--3366
EEnnvviirroo™ ™ WWiirreelliinne e GGrreeaasse e IInnjjeeccttiioon n CCoonnttrrool l HHeeaadd 3377--3388
EEnnvviirroo™ ™ CCoommbbiinnaattiioon n SSttuuffffiinng g BBoox x aannd d LLiinne e WWiippeerr 3399
EEnnvviirroo™ ™ SSiinngglle e ““CCoommppaacctt” ” PPaacckk--OOffff 4400
EEnnvviirroo™ ™ DDuuaal l ““CCoommppaacctt” ” PPaacckk--OOffff 4411
© Copyright Varco International Inc, © Copyright Varco International Inc, 20022002 www.elmarwww.elmar.co.uk.co.uk
SS
44
PRESSURE CONTROLPRESSURE CONTROL
EQUIPMENTEQUIPMENT
Section 4:Section 4: PPrreessssuurre e CCoonnttrrool l EEqquuiippmmeenntt PPaaggeeSection 4Section 4
Electric Line Pressure Control Equipment:Electric Line Pressure Control Equipment:
Electric Electric Line Line Pressure Pressure Control Control Equipment Equipment String String 2020
LLiigghhttwweeiigghht t PPrreessssuurre e CCoonnttrrool l EEqquuiippmmeennt t SSttrriinngg 2211
WWeellllhheeaad d AAddaapptteer r FFllaannggee 2222
PPuummpp--iin n SSuubb 2233
CCoommppaacct t WWiirreelliinne e VVaallvvee 2244
LLiigghhttwweeiigghht t WWiirreelliinne e VVaallvvee 2255
QQuuiicck k TTeesst t SSuubb 2266
HHyyddrraauulliic c TTooool l TTrraap p wwiitth h EExxtteerrnnaal l IInnddiiccaattoorr 2277
WWiirreelliinne e LLuubbrriiccaattoor r wwiitth h IInntteeggrraal l UUnniioonnss 2288
WWiirreelliinne e LLuubbrriiccaattoor r wwiitth h SSccrreewweed d UUnniioonnss 2299
BBlleeeedd--OOfff f SSuubb 3300
LLiigghhttwweeiigghht t LLuubbrriiccaattoorr 3311
CChheemmiiccaal l IInnjjeeccttiioon n SSuubb 3322
HHyyddrraauulliic c WWiirreelliinne e TTooool l CCaattcchheerr 3333
QQuuiicckk--IInntteerrcchhaanngge e TTooool l CCaattcchheerr 3344
WWiirreelliinne e GGrreeaasse e IInnjjeeccttiioon n CCoonnttrrool l HHeeaadd 3355--3366
EEnnvviirroo™ ™ WWiirreelliinne e GGrreeaasse e IInnjjeeccttiioon n CCoonnttrrool l HHeeaadd 3377--3388
EEnnvviirroo™ ™ CCoommbbiinnaattiioon n SSttuuffffiinng g BBoox x aannd d LLiinne e WWiippeerr 3399
EEnnvviirroo™ ™ SSiinngglle e ““CCoommppaacctt” ” PPaacckk--OOffff 4400
EEnnvviirroo™ ™ DDuuaal l ““CCoommppaacctt” ” PPaacckk--OOffff 4411
© Copyright Varco International Inc, © Copyright Varco International Inc, 20022002 www.elmarwww.elmar.co.uk.co.uk
SS
44
PRESSURE CONTROLPRESSURE CONTROL
EQUIPMENTEQUIPMENT
Section 4:Section 4: PPrreessssuurre e CCoonnttrrool l EEqquuiippmmeenntt PPaaggeeSection 4Section 4
TransporTransport t Racks:Racks:
SSlliicckklliinne e TTrraannssppoorrt t BBaasskkeettss 4422
5 Series 10,5 Series 10,000 psi 2-BOP000 psi 2-BOP PressPressureure
EEqquuiippmmeennt t SSyysstteemm 4433
10 Series 10,010 Series 10,000 psi 3-BOP00 psi 3-BOP PressPressureure
EEqquuiippmmeennt t SSyysstteemm 4444
““EE--LLiittee” ” TTrraannssppoorrt t SSyysstteemm 4455
15 Series 15,015 Series 15,000 psi 3-BOP00 psi 3-BOP PressPressureure
EEqquuiippmmeennt t SSyysstteemm 4466
Open Hole / Large Bore Equipment:Open Hole / Large Bore Equipment:
5 5 11//22” ” SSiinngglle e MMaannuuaal l HHeeaavvy y DDuutty y WWiirreelliinne e VVaallvvee 4477
HHyyddrraauulliic c WWiirreelliinne e AAnnnnuullaar r VVaallvvee 4488
DDuuaal l HHyyddrraauulliic c WWiirreelliinne e AAnnnnuullaar r VVaallvvee 4499
MM3300000 0 - - DDuuaal l HHyyddrraauulliic c WWiirreelliinne e AAnnnnuullaar r VVaallvvee 5500--5511
SSlliimmlliinne e aannd d SSlliimmlliitte e EEqquuiippmmeenntt 5522
Auxiliary Equipment:Auxiliary Equipment:
HHyyddrraauulliic c BBaalll l VVaallvvee 5533
MMuulltti i LLiinne e RRaam m SSeeaall 5544
QQ--GGUUIIDDEE™ ™ WWiirreelliinne e RRaamm 5555
SShheeaar r aannd d SSeeaal l WWiirreelliinne e RRaam m AAsssseemmbbllyy 5566
SSaaffeetty y FFlloow w DDiivveerrtteer r aannd d CCaabblle e CCllaammpp 5577
TTuurrn n AArroouunnd d SShheeaavve e ((TTAASS)) 5588
MMPPAA2 2 SSeerriiees s HHaay y PPuulllleey y AAsssseemmbbllyy 5599
(SSR Product Line)
© Copyright Varco International Inc, 2002 www.elmar.co.uk
1
4
The range of accessories is extensive with items such as:
• Test Caps
• Lift Caps
• Wireline Valve Work Stands
• Clamps for Slickline
• Braided Cable and Lubricator Clamps
• Hay Pulley's
• Sheave Wheels
• Lubricator Dolly's
• Crossovers
• Flanged Adaptors
These items provided by SSR International are only aselection of the product range and capabilities available.
For a more composite range of all the various products andservices on offer
contact SSRInternational.
• Stuffing Box
• Optional Tool
Catcher
• Lubricator
• Ported Lubricator
• Tool Trap
• Single Hydraulic
Wireline Valve
• Chemical
Injection Sub
SSR Internationaldesign, manufacture and certify Pressure Control Products to
meet and exceed the followingestablished industry standards:
• API 6A
• API 17D
• NACE MR0175
• NPD Regulations
• Statutory Instrument 1996 No. 913
• Statutory Instrument 1998 No. 2306
• Statutory Instrument 1998 No. 2307
Products are fully traceable and interchangeable, inspected
100% to assure a product of the highest quality exceedsour customer expectations in accordance with SSR
established QMS accredited to BS EN ISO 9001:1994
SSR Design and Manufacture Pressure Control Equipment and Accessories for Slickline and
Braided Cable Operations.
A full range of equipment is available, from the basic 2 1/2" ID 5,000psi WP manual items such as
Stuffing Boxes and the Silver Series Wireline Valve, through to the SSR Gold Series Dual and Triple
Wireline Valves that have been manufactured for applications with a WP of up to 15,000psi and a
maximum 9" through bore.
Slickline Pressure Control
Equipment StringPRESSURE CONTROL
EQUIPMENT
• Lubricator
Lightweight Sheave
The Elmar Wellhead Adapter Flange provides a means of connecting the wireline valve and
lubricator assembly to the wellhead in a safe and secure manner.
The Elmar Wellhead Adapter Flange consists of a quick union machined on a standard API flange.
The upper end has a standard Bowen type, Otis type or Elmar quick union and can be supplied
with a blanking plug and collar if required.
Elmar wellhead adapter flanges are available in various bore sizes from 2 1/16" to 7 1/16" and
working pressure up to 15,000 psi.
Elmar will design and manufacture well-head adapter flanges for all API standard models. Elmar
adapter flanges are fully traceable and certified to API 6A.
© Copyright Varco International Inc, 2002 www.elmar.co.uk
Thread Per
Inch (TPI)
Thread
Size
Seal Dia
API Ring
Groove
Number
API Ring Gasket
I.D.
TYPICAL ELMAR WELLHEAD ADAPTER FLANGE SECTION
L-972237 3 1/16” BX-154 10,000 psi H2S 4 3/4”-4x2 (3.750) Elmar
L-975187 3 1/16” BX-154 10,000 psi H2S 6 5/16”-4thd (3.750) Bowen
L-974529 4 1/16” R-39 5,000 psi H2S 7”-5thd (5.250”) Bowen
L-976006 4 1/16” BX-155 10,000 psi H2S 7 1/2”-4thd (5.500”) Otis
L-972366 4 1/16” BX-155 10,000 psi H2S 6 1/8”-4x2 (4.750”) Elmar
L-974533 5 1/2” R-44 5,000 psi H2S 8 1/4”-4x2 (6.750”) Bowen
L-974775 7 1/16” R-46 5,000 psi H2S 9”-4thd (6.750”) Otis
L-978774 3 1/16” BX-154 15,000 psi H2S 7”-5thd (4.375) Bowen
L-979123 4 1/16” BX-155 15,000 psi H2S 7”-5thd (4.375) Bowen
PartNumber
FlangeSize
WorkingPressure
Quick UnionFemale BoxService
RingGroove
Typical Elmar
Adapter Flange L-972237
PART NUMBERS
Wellhead Adapter FlangePRESSURE CONTROL
EQUIPMENT
2
4
The Pump-In Sub (PIS) is normally positioned below the Wireline Valve and above the Wellhead.
Its main function is to allow well control by pumping fluid below a closed Wireline Valve.
The PIS has quick unions top and bottom, and a WECO (Hammer Union) type side connection.
Pump-in Subs are normally supplied with a blind plug & nut on the WECO port. A suitable valve is
needed to operate the PIS, replacing the blind plug. Pump-in Subs can also be used for fluid
sampling or inhibitor injection. Specially designed Pump-in Subs, with different top and bottom
unions are used as wellhead adapter x-overs.
WorkingPressure
Service Connection Side OutletI.D.Part
Number
10,000 PSI H2S 4 3/4”-4x2 (3.750”) Elmar 2” 15023”L-972052
10,000 PSI STD 4 3/4”-4thd (3.750”) Bowen 2” 15023”L-979873
10,000 PSI H2S 5 3/4”-4thd (4.000”) Otis 2” 15023”L-979098
10,000 PSI H2S 6 5/16”-4thd (4.375”) Bowen 2” 15023”L-977282
10,000 PSI H2S 8 1/4”-4x2 (6.000”) Bowen 2” 15024”L-978110
10,000 PSI H2S 6 1/8”-4x2 (4.750”) Elmar 2” 15024.06”L-972224
5,000 PSI H2S 8 1/4”-4x2 (6.750”) Elmar 2” 15025.5”L-978891
• Quick Test Sub
• Wireline Valve
• Pump-in Sub
• Wellhead
Adapter
Flange
Typical Elmar 3” Pump-in Sub
PUMP-IN SUB IN POSITION
15,000 PSI H2S 7”-5thd (4.375”) Bowen 2” 22023”L-978771
15,000 PSI H2S 9 1/2”-4thd (6.250”) Otis 2” 22024.5”L-979733
10,000 PSI H2S 11 1/2”-4thd (8.250”) Otis 2” 15026 3/8”L-979264
PART NUMBERS
© Copyright Varco International Inc, 2002 www.elmar.co.uk
L-840805 Plug Valve 10,000 psi H2S 2” 1502
L-840605 Plug Valve 15,000 psi H2S 2” 2202
Part Number Description Working Pressure ConnectionService
ACCESSORIES
• Plug
Valve
Pump-in SubPRESSURE CONTROL
EQUIPMENT
3
4
(SSR Product Line)
The SSR Silver Series Wireline Valve is a hydraulic compact wireline valve of monobloc
construction designed specifically to be used as a Single or Dual, for Slickline and Braided Line
operations.
4
4
Single Silver Series
Wireline ValvePRESSURE CONTROL
EQUIPMENT
• No Welding - Quick Unions are screwed into the
Body with SSR ACME thread which incorporates
primary 'O' Ring Seal with Metal to Metal Back-up.
• The Wireline Valve has single
point Equalizer Valve Assembly.
• Hydraulic Cylinders held in position with ACME
type Quick Union Collars thereby eliminating the
need for special tools or Flogging Hammers during
Ram Change-out or Re-dress.
• Manual Back-up Stems fitted as Back-up to Hydraulic System.
• All Inner and Outer Seals are
interchangeable with other major
manufacturers.
• Det Norske Veritas and Lloyds
Design type approval for use in the
North Sea.
• Sizes: 3" through to 6 3/8"
• Operating Pressure: Up to 10,000psi.
• Standard or H2S Service.
Working Pressure Unions Wire Size Assembly Number
5,000psi 4 3/4" - 4THD 'BB' 0.125" A001-017
3/16" A001-018
7/32" A001-019
5/16" A001-020
5,000psi 5 3/4" - 4THD 'OO' 0.125" A001-021
3/16" A001-022
7/32" A001-023
5/16" A001-024
10,000psi 6 5/16" - 4THD 'BB' 0.125" A001-025
3/16" A001-026
7/32" A001-027
5/16" A001-028
10,000psi 5 3/4" - 4THD 'OO' 0.125" A001-029
3/16" A001-030
7/32" A001-031
5/16" A001-032
Working Pressure Unions Wire Size Assembly Number
5,000psi 4 3/4" - 4x2 'BB' 0.125" A003-173
3/16" A003-174
7/32" A003-175
5/16" A003-176
5,000psi 5" - 4THD 'OO' 0.125" A003-168
3/16" A003-170
7/32" A003-171
5/16" A003-172
10,000psi 6 5/16" - 4THD 'BB' 0.125" A003-165
3/16" A003-166
7/32" A003-177
5/16" A003-178
10,000psi 5 3/4" - 4THD 'OO' 0.125" A003-144
3/16" A003-179
7/32" A003-180
5/16" A003-181
Working Pressure Unions Wire Size Assembly Number
5,000psi 7" - 5THD 'BB' 0.125" A005-093
3/16" A005-121
7/32" A005-122
5/16" A005-123
5,000psi 6 1/2" - 4THD 'OO' 0.125" A005-092
3/16" A005-124
7/32" A005-125
5/16" A005-126
10,000psi 8 1/4"- 4x2 'BB' 0.125" A005-098
3/16" A005-127
7/32" A005-128
5/16" A005-129
10,000psi 8 3/8" - 4THD 'OO' 0.125" A005-111
3/16" A005-130
7/32" A005-131
5/16" A005-132
Working Pressure Unions Wire Size Assembly Number
5,000psi 8 1/4 4x2 'BB' 0.125" A007-139
(6.750") Seal Dia. 3/16" A007-140
7/32" A007-141
5/16" A007-142
5,000psi 8 1/4" - 4THD 'OO' 0.125" A007-135
3/16" A007-143
7/32" A007-144
5/16" A007-145
10,000psi 8 7/8" - 4x2 'BB' 0.125" A007-146
3/16" A007-147
7/32" A007-148
5/16" A007-149
10,000psi 9" - 4THD 'OO' 0.125" A007-104
3/16" A007-150
7/32" A007-151
5/16" A007-152
'OO' - OTIS type Union 'BB' - BOWEN type Union
Working Pressure Unions Wire Size Assembly Number
5,000psi 9 7/8" - 4x2 'BB' 0.125" A009-085
3/16" A009-143
7/32" A009-144
5/16" A009-145
5,000psi 9 1/2" - 4THD 'OO' 0.125" A009-068
3/16" A009-069
7/32" A009-070
5/16" A009-071
10,000psi 12 1/4" - 4THD 'BB' 0.125" A009-146
3/16" A009-147
7/32" A009-148
5/16" A009-149
10,000psi 11 1/2" - 4THD 'OO' 0.125" A009-073
3/16" A009-074
7/32" A009-075
5/16" A009-076
2 1/2” DIAMETER THROUGH BORE
3” DIAMETER THROUGH BORE
4” DIAMETER THROUGH BORE
© Copyright Varco International Inc, 2002 www.elmar.co.uk
5” DIAMETER THROUGH BORE
6 3/8” DIAMETER THROUGH BORE
(SSR Product Line)
5
4
The SSR Gold Series Wireline Valve is a hydraulic compact wireline valve of monobloc
construction designed specifically to be used as a single, Dual, Triple or Quadruple Wireline Valve
for Slickline, Braided Line and Electric Line Well Service operations.
Working Pressure Unions Wire Size Assembly Number
5,000psi 7" - 5THD 'BB' 0.125" A005-086
3/16" A005-133
7/32" A005-135
5/16" A005-134
5,000psi 6 1/2" - 4THD 'OO' 0.125" A005-136
3/16" A005-137
7/32" A005-138
5/16" A005-139
10,000psi 8 1/4" - 4x2 'BB' 0.125" A005-140
(6.000") Seal Dia. 3/16" A005-141
7/32" A005-142
5/16" A005-143
10,000psi 8 3/8" - 4THD 'OO' 0.125" A005-144
3/16" A005-145
7/32" A005-146
5/16" A005-147
Working Pressure Unions Wire Size Assembly Number
5,000psi 8 1/4" - 4x2 'BB' 0.125" A007-093
(6.750") Seal Dia. 3/16" A007-121
7/32" A007-122
5/16" A007-123
5,000psi 8 1/4" - 4THD 'OO' 0.125" A007-092
3/16" A007-124
7/32" A007-125
5/16" A007-126
10,000psi 8 7/8"- 4x2 'BB' 0.125" A007-098
3/16" A007-127
7/32" A007-128
5/16" A007-129
10,000psi 9" - 4THD 'OO' 0.125" A007-111
3/16" A007-130
7/32" A007-131
5/16" A007-132
Working Pressure Unions Wire Size Assembly Number
5,000psi 9 7/8" 4x2 'BB' 0.125" A009-082
3/16" A009-150
7/32" A009-084
5/16" A009-151
5,000psi 9 1/2" - 4THD 'OO' 0.125" A009-152
3/16" A009-153
7/32" A009-154
5/16" A009-155
10,000psi 12 1/4" - 4THD 'BB' 0.125" A009-156
3/16" A009-157
7/32" A009-158
5/16" A009-159
10,000psi 11 1/2" - 4THD 'OO' 0.125" A009-160
3/16" A009-101
7/32" A009-161
5/16" A009-099
'OO' - OTIS type Union 'BB' - BOWEN type Union
Dual Gold Series Wireline ValvePRESSURE CONTROL
EQUIPMENT
Working Pressure Unions Wire Size Assembly Number
5,000psi 4 1/2" - 4x2 'BB' 0.125" A003-186
3/16" A003-187
7/32" A003-188
5/16" A003-189
5,000psi 5" - 4THD 'OO' 0.125" A003-193
3/16" A003-190
7/32" A003-191
5/16" A003-192
10,000psi 6 5/16" - 4THD 'BB' 0.125" A003-119
3/16" A003-182
7/32" A003-149
5/16" A003-114
10,000psi 5 3/4" - 4THD 'OO' 0.125" A003-185
3/16" A003-183
7/32" A003-121
5/16" A003-184
© Copyright Varco International Inc, 2002 www.elmar.co.uk
6 3/8” DIAMETER THROUGH BORE
• Forged Monobloc Construction allowing Single, Dual, Triple or
Quadruple configurations.
• No Welding - Quick Unions are screwed into the Monobloc
Body with SSR ACME thread which incorporates
primary 'O' Ring Seal with Metal to Metal
Back-up.
• The Wireline Valve has
Integral Equalizer Valve
Assembly allowingequalizing in any
combination between
Rams and eliminates
damage to Equalizing
Assembly.
• Main Body is machined with Grease Injection Port
between Rams.
• Hydraulic Cylinders held in position with ACME type Quick
Union Collars thereby eliminating the need for special tools or
Flogging Hammers during Ram Change-out or Re-dress.
• Unique 'Gib Key' design eliminates the need for a slot in the Ram
Cavity and therefore allows complete flexibility to arrange Ram
configuration as required to include inverting Rams for Grease
Injection.
• Easy Ram Inner and Outer Seal Change-out on
Wellhead possible, due to Guide Brackets supplied
as standard.
• Non-Rising Manual Back-up
Stems eliminate 'Stem Damage'.
• All Inner and Outer Seals are
interchangeable with other major
manufacturers.
• Det Norske Veritas and Lloyds Design type
approval for use in the North Sea.
• Sizes: 3" through to 9"
• Operating Pressure: Up to 15,000psi.
• Standard or H2S Service.
5” DIAMETER THROUGH BORE
3” DIAMETER THROUGH BORE
4” DIAMETER THROUGH BORE
9” DIAMETER THROUGH BORE
Working Pressure Unions Wire Size Assembly Number
5,000psi 12" - 4THD 'OO' 0.125" A104-004
3/16" A104-005
7/32" A104-006
5/16" A104-007
6
4
The Elmar “Lightweight” Wireline Valve is available in 3” I.D., 10,000 psi working pressure, H2Sservice, in either single, dual or triple configurations. (Soon to be available in 4”, 5” and 6 3/8” I.D.)
The Elmar “Lightweight” Wireline Valve gives positive protection during well service operations,when operating with slickline, braided wireline and electric line.
All Elmar “Lightweight” Wireline Valves are up to 60% lighter than previous generation WirelineValves and incorporate the following features as standard :-
© Copyright Varco International Inc, 2002 www.elmar.co.uk
WorkingPressure
ServiceSingle/Dual
TripleQuick UnionI.D.
PartNumber
10,000 PSI H2S Single 4 3/4”-4x2 (3.750”) Elmar 3”L-974111
10,000 PSI H2S Dual 4 3/4”-4x2 (3.750”) Elmar 3”L-974223
10,000 PSI H2S Triple 4 3/4”-4x2 (3.750”) Elmar 3”L-974224
PART NUMBERS
Equalisation Valve
Equalisation Valve
Glycol Injection
Grease Injection
MANIFOLDS
Gauge Port
ManualHandleStored
Bleed Off
LIGHTWEIGHT BOP, LUBRICATOR AND STUFFING BOX
• Lightweight
Slickline
Stuffing Box
• 3” Lightweight
Wireline Valve
• Lightweight
Lubricator
Section
Grease/Glycol Injection
and Equalistion
Bleed Off and Gauge
Part Number L-974111(Patent Pending)
Note: Ram line size to be specified at time of ordering
“Lightweight” Wireline ValvePRESSURE CONTROL
EQUIPMENT
• Lightweight, allowing easier handling
3” Single 66kg, (146lb), Dual 114kg, (251lb)
and Triple 162kg, (357lb)
• Compact size, allowing shorter rig-up heights
• Back-up manual closure
• Threaded quick unions, allowing the use of any
Bowen type or Otis type union without changing
the body
• Ram position indicator rods
• Manifold blocks with integral equalisation, glycol
and grease injection facilities
• Maximum working pressure 10,000 psi H2S service
• Maximum hydraulic working pressure 3,000 psi
• API 6A and NACE compliant
• Third Party Design Approval
• Keyless Q-GUIDE™ ram design providing flexible
ram configuration and positive wireline guiding
• “Multiline” inner seal accommodating a range of
wireline sizes