Upload
henry2111
View
215
Download
0
Embed Size (px)
Citation preview
8/6/2019 Prepking 9L0-610 Exam Questions
1/11
www.Prepking.com
Exam : Apple 9L0-610
Title : Xsan Administration v1.1 Exam
Version : R6.1
8/6/2019 Prepking 9L0-610 Exam Questions
2/11
www.Prepking.com
Prepking - King of Computer Certification
Important Information, Please Read Carefully
Other Prepking products
A) Offline Testing engine
Use the offline Testing engine product to practice the questions in an exam environment.
B) Study Guide (not available for all exams)
Build a foundation of knowledge which will be useful also after passing the exam.
Latest Version
We are constantly reviewing our products. New material is added and old material is
updated. Free updates are available for 90 days after the purchase. You should check yourmember zone at Prepking and update 3-4 days before the scheduled exam date.
Here is the procedure to get the latest version:
1.Go towww.Prepking.com
2.Click on Member zone/Log in (right side)
3. Then click My Account
4.The latest versions of all purchased products are downloadable from here. Just click the
links.
For most updates,it is enough just to print the new questions at the end of the new version, not the whole
document.
Feedback
If you spot a possible improvement then please let us know. We always interested in
improving product quality.
Feedback should be send to [email protected]. You should include the following:
Exam number, version, page number, question number, and your login ID.
Our experts will answer your mail promptly.
Copyright
Each PDF file contains a unique serial number associated with your particular name and
contact information for security purposes. So if we find out that a particular PDF file is
being distributed by you, Prepking reserves the right to take legal action against youaccording to the International Copyright Laws.
Explanations
This product does not include explanations at the moment. If you are interested in
providing explanations for this exam, please contact [email protected].
8/6/2019 Prepking 9L0-610 Exam Questions
3/11
www.Prepking.com
1. To view the WWPNs for an Apple Fibre Channel PCI-X card, use __________.
A. Xsan Admin
B. Fibre Channel Utility
C. RAID Utility
D. cvadmin
Answer: B
2. Which application allows you to monitor the status of disks within Xserve RAID LUNs?
A. Activity Monitor
B. Disk Utility
C. RAID Admin
D. Xsan Admin
Answer: C
3. Which statement is implied by the concept called "information lifecycle management"?
A. All information should be backed up in a weekly cycle.
B. Disk-to-disk backup should be used for archival information.
C. Information should be regularly cycled between backup devices.
D. Storage resources should be allocated according to importance of data.
Answer: D
4. Xsan is a _______ file system.
A. local
B. cluster
C. network
D. distributed
Answer: B
5. RAID Admin's LUN mapping and masking features allow you to _______.
A. create folders that map data to a specified LUN or LUNs
B. create LUNs that are available to only one client
C. create LUNs that consist of a single dedicated drive
D. add more disks to a LUN without taking the array offlineAnswer: B
6. Indicate the correct port settings when you configure an Emulex 355 switch for Xsan.
A. Host machine ports set as "Initiator with Stealth" and storage device ports set as "Target with Stealth."
B. Host machine ports set as "Target with Stealth" and storage device ports set as "Initiator with Stealth."
C. Both host machine ports and storage device ports set as "Initiator with Stealth."
D. Both host machine ports and storage device ports set as "Target with Stealth."
8/6/2019 Prepking 9L0-610 Exam Questions
4/11
www.Prepking.com
Answer:A
7. When naming an Xsan volume, which TWO statements are true? (Choose TWO.)
A. Any low-ASCII character can be used.
B. Only letters and numbers can be used.
C. Only lowercase letters and numbers can be used.
D. Only uppercase letters and numbers can be used.
E. Volume names can be up to 16 characters in length.
F. Volume names can be up to 70 characters in length.
G. Volume names can be up to 256 characters in length.
Answer: BF
8. What is the recommended topology setting for the Apple Fibre Channel PCI-X card?
A. Automatic
B. Point-to-point
C. Arbitrated loop
D. Switched fabric
Answer:A
9. Fibre Channel Arbitrated Loop addresses use only the _________ field of Fabric Address Space.
A. Area
B. Domain
C. Loop
D. Port
Answer: D
10. Within a storage pool, Xsan stripes data over _______.
A. LUNs
B. volumes
C. disks
D. affinities
Answer:A
11. Which is an advantage of Fibre Channel switches over hubs?A. Switches support point-to-point connections.
B. Switches use FC-AL protocol.
C. Switches enable the use of fiber-optic cabling.
D. Switches allow multiple simultaneous connections.
Answer: D
12. Xsan clients talk to _______ to discover available Xsan volumes.
8/6/2019 Prepking 9L0-610 Exam Questions
5/11
www.Prepking.com
A. fsm
B. fsmpm
C. servermgrd
D. watchdog
Answer: B
13. Which THREE are valid Fibre Channel network topologies? (Choose THREE.)
A. Point-to-Point
B. Token Ring
C. Arbitrated Loop
D. Unswitched Fabric
E. Switched Fabric
F. Parallel
G. Star
Answer:ACE
14. Which is the correct order of steps to create a volume in Xsan?
A. Create LUNs, label LUNs, create storage pools, add LUNs to storage pools, create volumes.
B. Create LUNs, label LUNs, create volumes, create storage pools, add LUNs to storage pools.
C. Create volumes, create storage pools, create LUNs, label LUNs, add LUNs to storage pools.
D. Create LUNs, create storage pools, label LUNs, add LUNs to storage pools, create volumes.
Answer: B
15. What should you do before adding a storage pool to an existing Xsan volume?
A. Stop the volume.
B. Unmount the volume from all nodes.
C. Unmount the volume from the metadata controller.
D. Unmount the volume from all nodes, and stop the volume.
Answer: D
16. In Xsan implementations, the two types of device that are connected to a Fibre Channel switch are
called __________.
A. ISLs and SFPsB. volumes and LUNs
C. F ports and E ports
D. initiators and targets
E. sources and destinations
Answer: D
17. Setting up a separate storage pool for metadata and journal data can _______________.
8/6/2019 Prepking 9L0-610 Exam Questions
6/11
www.Prepking.com
A. make user quota configuration more complicated
B. increase free disk space on the primary metadata controller
C. improve I/O throughput for user data
D. cause data loss due to multiple files having the same address
Answer: C
18. The aggregate bandwidth of a Fibre Channel fabric _________.
A. increases as nodes are added
B. decreases as nodes are added
C. is 2 Gb/s (half duplex)
D. cannot exceed 3200 MB/s (half duplex)
Answer:A
19. What MUST be present for a SAN to be considered a fabric?
A. hub
B. switch
C. metadata controller
D. host bus adapter
Answer: B
20. Creating multiple storage pools within a volume allows you to ___________.
A. improve performance of LUN mapping and masking
B. improve read/write efficiency for specific applications
C. increase the bandwidth of the private LAN
D. decrease the number of RAID arrays needed
Answer: B
21. Which parameter defines how many blocks a client writes to a LUN before moving on to the next LUN
within a storage pool?
A. block allocation size
B. stripe breadth
C. number of LUNs
D. RAID level configurationAnswer: B
22. What is the maximum Xsan volume size you can create for use with Mac OS X 10.3.x clients?
A. 4 TB
B. 12 TB
C. 16 TB
D. 32 TB
8/6/2019 Prepking 9L0-610 Exam Questions
7/11
www.Prepking.com
E. 1 PB
Answer: C
23. In order to assign an affinity to a folder that is inside another folder on an Xsan volume, you need to use
_______.
A. Xsan Admin
B. cvsubvolume
C. cvginfo
D. cvaffinity
E. cvmkdir
Answer: E
24. When LUNs of different sizes are utilized in one storage pool, _____________.
A. some storage space will be wasted
B. it increases the efficiency of the storage pool
C. the storage pool must be assigned an affinity
D. block size has to be optimized for the smallest LUN
Answer:A
25. When a client accesses files over Xsan, what information is accessed over the Ethernet link? (Choose
THREE.)
A. file names
B. file contents
C. permissions
D. creation/modification dates
E. file icons
F. Spotlight comments
Answer:ACD
26. Can switching hubs be used with Xsan?
A. No, Xsan supports only switched fabric topology.
B. Yes, Xsan supports any Fibre Channel hub and topology.
C. Yes, but the only switching hubs Xsan supports are the Emulex (Vixel) 355 and 375 switches.D. Yes, but the only switching hubs Xsan supports are the Qlogic SANbox 2-8, 2-16, 2-64, and 5200
switches.
Answer: C
27. Using Xsan, how many computers can simultaneously access a shared volume?
A. 8
B. 16
8/6/2019 Prepking 9L0-610 Exam Questions
8/11
www.Prepking.com
C. 32
D. 64
Answer: D
28. Array-based virtualization means that ____________.
A. each disk drive is mirrored by a backup drive
B. data is saved redundantly to multiple drives
C. an Xsan volume may reside on one or more physical drives
D. hosts can access storage devices located in distant sites
Answer: C
29. Where is Xsan metadata stored?
A. on the local drive of the metadata controller
B. on the first volume of the SAN
C. on the first storage pool of each volume
D. on the first LUN in each storage pool
Answer: C
30. What port type is used for Fibre Channel point-to-point topologies?
A. B_Port
B. E_Port
C. FL_Port
D. N_Port
E. P_Port
Answer: D
31. WWNNs and WWPNs are assigned to devices _____________.
A. by the factory, during manufacturing
B. by the Fibre Channel switch, during initialization
C. by Fibre Channel Utility, during setup
D. by RAID Admin, during configuration
E. by Xsan Admin, during configuration
Answer:A32. Xsan Admin configures Xsan clients via _______.
A. fsmpm
B. cvadmin
C. servermgrd
D. xsanadmin
Answer: C
8/6/2019 Prepking 9L0-610 Exam Questions
9/11
www.Prepking.com
33. When using Xsan Admin, which changes to an Xsan installation will result in lost data? (Choose
THREE.)
A. Renaming a volume
B. Changing a volume's allocation strategy
C. Changing the size of a storage pool by adding LUNs
D. Changing a storage pool's stripe breadth
E. Failover to the low priority standby metadata controller
Answer:ABD
34. In a RAID 5 array, if a drive fails, the data __________.
A. is lost and cannot be reconstructed
B. is not lost because it is mirrored on one of the other drives
C. can be reconstructed from parity data stored on a dedicated drive
D. must be reconstructed from data stored on the metadata controller
E. can be reconstructed from parity data striped across the other drives
Answer: E
35. In Fibre Channel terminology, the physical media that connect ports together in a SAN are called
_______.
A. channels
B. fibres
C. links
D. nodes
Answer: C
36. When the metadata controller starts up, which TWO things will each fsm register with fsmpm? (Choose
TWO.)
A. volume name
B. failover priority
C. port access number
D. metadata MAC address
E. WWNNAnswer:AC
37. Why might an Xsan client user see error message code -1425?
A. User has exceeded the hard quota.
B. Xsan volume is not available at the time.
C. User tried to connect but no user record was found.
D. User does not have write permissions on a folder or volume.
8/6/2019 Prepking 9L0-610 Exam Questions
10/11
www.Prepking.com
Answer:A
38. Which CLI tool is used to return a LUN to a state in which Disk Utility can initialize it?
A. cvadmin
B. cvfsck
C. cvmkfs
D. cvupdatefs
E. cvlabel
Answer: E
39. You have created a storage pool with two LUNs that share the same RAID controller. Assume that the
RAID controller has a bandwidth of 200 MB/s (half-duplex). What is the theoretical bandwidth (half-duplex)
of the storage pool?
A. 25 MB/s
B. 50 MB/s
C. 100 MB/s
D. 200 MB/s
E. 400 MB/s
Answer: D
40. If you create multiple storage pools in a volume but do not use affinities, you should ensure that all the
storage pools ___________.
A. have different RAID levels
B. contain metadata and journaling data
C. provide the same data transfer rate to the user
D. appear as separate folders on the Xsan volume
Answer: C
41. Press Exhibit to view the image. From the image in the exhibit, we can tell that BIGBOY is ________.
A. running
B. not yet created
C. created, but not running
D. one storage pool of the volume BUBBA
Answer: C
42. Which tool lets you mount Xsan volumes on a client computer?
A. Finder
8/6/2019 Prepking 9L0-610 Exam Questions
11/11
100% Pass Guaranteed or Full RefundWord to Word Real Exam Questions from Real Test
Buy full version of exam from this link belowhttp://www.prepking.com/9L0-610.htm