Upload
hoangliem
View
241
Download
7
Embed Size (px)
Citation preview
Continuous Innovation Since 1836
www.palmerwahl.com1-800-421-2853
PW113708/14
Precision Digital PressureGauges, Reference PressureRecorders & Pressure Pumps
Precision Digital PressureGauges, Reference PressureRecorders & Pressure Pumps
ISO 9001:2008CERTIFIED QUALITY
MANAGEMENT SYSTEM
Reduce equipment cost, trainingtime, and operator error with
Palmer’s new line of digital pressuregauges and recorders.
Precision Test GaugesDigital Pressure Gauges
High Precision RecordersPressure Hand Pumps
Precision TestGauges
(800) 421-2853 • FAX (828) 658-0728 • www.palmerwahl.com2 PW1137 08/14
Continuous Innovation Since 1836ISO 9001:2008 CERTIFIED
Model PTG100 • Precision TestGauge
Palmer’s NEW! Model PTG100Precision Test Gauge isdesigned for field and laboratoryapplications for precision pressure measurement and field gauge calibration.
Display: 6 full digit LCD with LED Backlight.
Pressure Units available: User selectable Pa, kPa, MPa, psi, bar, mbar, inH2O, mmH2O, inHgand mmHg depending on range and resolution capabilities of the gauge.
Burst Pressure Rating: see reference table pg 5.
Compensated Temperature: 32° to 122°F (0° to 50°C). Note: 0.025% Full Scale accuracy guaranteed only over the ambient temperature range of 68° to 77°F (20° to 25°C).
Storage Temperature: -4° to 158°F (-20° to 70°C).
Humidity: < 95%.
Media Compatible: 0 to 0.16 bar: Non-corrosive Gas compatible, 0.35 to 2500 bar: Liquid, Gas or Steam Compatible with 316SS.
Pressure Port: 1/4" NPT. Optional 1/4" to 1/2" SS Adaptor.
Battery: 3 AA Alkaline batteries, User Replaceable.
Battery Life: 1 Year under normal working conditions. Battery life will varydepending on the frequency of readings.
Case Material: Aluminum alloy.
Wetted Parts: 316L SS. Differential Gauge has Brassinternals for clean gas applications only.
Dimensions: 3.9" Diameter X 1.4" Depth X 6.1" Height,incl. Threads (100mm X 37mm X 157mm).
Weight: 1 lb (0.45kg).
Specifications
• Pressure ranges to 2500 bar
• Fully temperature-compensatedaccuracy from 32° to 122°F (0° to 50°C)
• 2-Point Field Calibrationcapability
• Up to nine selectable pressureunits
• Large, easy-to-read backlit display with 6-digit resolution
• Low power consumption,continuous working time upto 10,000 hours in non-sleepmode
• Auto peak recording
Specifications subject to change without notice.Register your product at www.palmerwahl.com/register
PTG100 Gauge Pressure Ranges
RangeCode
barAccuracy
1Accuracy
2Accuracy
3
GV -1 0.025 G 0.05 G ---
G5 0.16 0.025 G 0.05 G 0.05 A
G6 0.35 0.025 G 0.05 G 0.05 A
G7 0.7 0.025 G 0.05 G 0.05 A
G8 10 0.025 G 0.05 G 0.05 A
G9 16 0.025 G 0.05 G 0.05 A
G10 35 0.025 G 0.05 G 0.05 A
G11 70 0.025 G 0.05 G 0.05 A
G13 160 0.025 S 0.05 S 0.05 A
G14 250 0.025 S 0.05 S 0.05 A
G15 400 0.025 S 0.05 S 0.05 A
G16 600 0.025 S 0.05 S 0.05 A
G17 1000 --- 0.1 S ---
G18 1600 --- 0.1 S ---
G19 2500 --- 0.1 S ---
PTG100 Compound Pressure Ranges
RangeCode
barAccuracy
1Accuracy
2
C6 ± 0.16 --- 0.05
C8 ± 0.4 0.025 0.05
C10 ± 1 0.025 0.05
C11 -1 to 1.6 0.025 0.05
C12 -1 to 2.5 0.025 0.05
PTG100 Differential Pressure Ranges
RangeCode
barAccuracy
1Accuracy
2
D1 0.0025 0.5 ---
D2 0.01 0.1 ---
D3 0.02 --- 0.05
D4 0.05 --- 0.05
G = Gauge Pressure; Temperature Range forAssuring Accuracy: 1: (20 ±5)°C; 2: (0~50)°C.
D = Differential Pressure; Temperature Range forAssuring Accuracy: 1: (20 ±5)°C; 2: (0~50)°C.*For optional threads consult factory.
G = Gauge Pressure; S = Sealed GaugePressure; A = Absolute Pressure; TemperatureRange for Assuring Accuracy: �1: (20 ±5)°C;2: (20~25)°C; 3: (0~50)°C.
ApplicationsPrecision Pressure Measurement
Field Gauge Calibration
Blood-pressure Meter Calibration
Pressure Instrument Calibration
Accuracy:
0.025% of full scale
0.05% of full scale
0.1% of full scale
0.5% of full scale
Ideal substitution for precision pointerpressure gauges.
bar x 14.5037 = PSI
Note: Pleaseconsult tables onpg 5 for Burst
Pressure Ratingand correctPressure andAccuracy TypeCode desired.
WARRANTY
Digital PressureGauges
3(800) 421-2853 • FAX (828) 658-0728 • www.palmerwahl.comContinuous Innovation Since 1836
ISO 9001:2008 CERTIFIED
Specifications subject to change without notice.Register your product at www.palmerwahl.com/register
PW1137 08/14
Model PTG200 • Digital PressureGauge
Specifications
Palmer’s NEW! Model PTG200Digital Pressure Gauge isdesigned for field and laboratoryapplications. It can be used forprecision pressure measurementand field gauge calibration, etc.The PTG200 Gauge is an idealsubstitution for precision pointerpressure gauge readings.
Display: 5 full digit LCD with LED Backlight.
Pressure Units available: User selectable Pa, kPa, MPa, psi, bar, mbar, inH2O, mmH2O, inHgand mmHg depending on range and resolution capabilities of the gauge.
Burst Pressure Rating: see reference table pg 5.
Compensated Temperature: 32° to 122°F (0° to 50°C).
Storage Temperature: -4° to 158°F (-20° to 70°C).
Humidity: < 95%.
Media Compatible: 0 to 0.16 bar: Non-corrosive Gas compatible, 0.35 to 2500 bar: Liquid, Gas or Steam Compatible with 316SS.
Pressure Port: 1/4" NPT. Optional 1/4" to 1/2" SS Adaptor.
Battery: 3 AA alkaline batteries, User Replaceable.
Battery Life: 1 Year under normal working conditions. Battery life will varydepending on the frequency of readings.
Case Material: Aluminum alloy.
Wetted Parts: 316L SS. Differential Gauge has Brassinternals for clean gas applications only.
Dimensions: 4.5" Width X 3.5" Depth X 6.1" Height,incl. Threads (115mm X 90mm X 157mm).
Weight: 1 lb (0.45kg).
• Pressure ranges to 2500 bar
• Full Scale Accuracy:0.1%,0.2%
• Fully temperature-compensatedaccuracy from 32° to 122°F (0° to 50°C)
• 2-Point Field Calibrationcapability
• Up to nine selectable pressureunits display
• Large, easy-to-read backlit display with 5-digit resolution
• Low power consumption,continuous working time upto three years under non-sleepmode
• Auto peak recording
PTG200 Gauge Pressure Ranges
RangeCode
barAccuracy
1Accuracy
2
GV -1 0.1 G ---
G5 0.16 0.1 G ---
G6 0.35 0.1 G ---
G7 0.7 0.1 G 0.1 A
G8 10 0.1 G 0.1 A
G9 16 0.1 G 0.1 A
G10 35 0.1 G 0.1 A
G11 70 0.1 G 0.1 A
G13 160 0.1 S 0.1 A
G14 250 0.1 S 0.1 A
G15 400 0.1 S 0.1 A
G16 600 0.1 S 0.1 A
G17 1000 0.2 S ---
G18 1600 0.2 S ---
G19 2500 0.2 S ---
PTG200 Compound Pressure Ranges
RangeCode
barAccuracy
1
C6 ± 0.16 0.1
C8 ± 0.4 0.1
C10 ± 1 0.1
C11 -1 to 1.6 0.1
C12 -1 to 2.5 0.1
PTG200 Differential Pressure Ranges
RangeCode
barAccuracy
1Accuracy
2
D1 0.0025 0.1 ---
D2 0.01 0.2 ---
D3 0.02 --- 0.1
D4 0.05 --- 0.1
G = Gauge Pressure; Temperature Range forAssuring Accuracy: 1: (0~50)°C.
D = Differential Pressure; Temperature Range forAssuring Accuracy: 1: (20 ±5) °C; 2: (0~50) °C.*For optional threads consult factory.
G = Gauge Pressure; S = Sealed GaugePressure; A = Absolute Pressure; TemperatureRange for Assuring Accuracy: �1: (20 ±5)°C;2: (0~50)°C.
ApplicationsPrecision Pressure Measurement
Field Gauge Calibration
Blood-pressure Meter Calibration
Pressure Instrument Calibration
Accuracy:
0.1% of full scale
0.2% of full scale
bar x 14.5037 = PSI
WARRANTY
Non-volatile memory will retainrecorded data in power loss.
Note: Pleaseconsult tables onpg 5 for Burst
Pressure Ratingand correctPressure andAccuracy TypeCode desired.
Data is not lost if power outages occur.High PrecisionPressure Recorders Model PTG300 • High Precision
Digital Reference Pressure Recorder
(800) 421-2853 • FAX (828) 658-0728 • www.palmerwahl.com4 PW1137 08/14
Continuous Innovation Since 1836ISO 9001:2008 CERTIFIED
Palmer’s NEW! Model PTG300 HighPrecision Pressure Recorder is a batterypowered pressure recorder, with an LCDdisplay. Available on-screen data includes:statistics (max, min, average); recordingstatus (start, stop and recording rate),display options (channel, units, text size);calibration information (date calibrated,date for recalibration). Statistics can becleared at any time during logging. Thisgauge has one of the largest memorycapacities of similar data recorders on themarket. The non-volatile memory willretain recorded data, even if battery poweris lost. Serial connection is also available.
• Pressure Ranges to 2,500 bar
• 2-Point Field Calibration capability
• Real-time operation, high speeddownload
• User selectable measurement units
• Advanced temperature compensation
Accuracy:
0.05% of full scale
0.1% of full scale
0.5% of full scale
Specifications
Specifications subject to change without notice.Register your product at www.palmerwahl.com/register
PTG300 Gauge Pressure Ranges
RangeCode
barAccuracy
1Accuracy
2
GV -1 0.05 G ---
G5 0.16 0.05 G 0.05 A
G6 0.35 0.05 G 0.05 A
G7 0.7 0.05 G 0.05 A
G8 10 0.05 G 0.05 A
G9 16 0.05 G 0.05 A
G10 35 0.05 G 0.05 A
G11 70 0.05 G 0.05 A
G13 160 0.05 S 0.05 A
G14 250 0.05 S 0.05 A
G15 400 0.05 S 0.05 A
G16 600 0.05 S 0.05 A
G17 1000 0.1 S ---
G18 1600 0.1 S ---
G19 2500 0.1 S ---
PTG300 Compound Pressure Ranges
RangeCode
barAccuracy
1
C6 ± 0.16 0.05
C8 ± 0.4 0.05
C10 ± 1 0.05
C11 -1 to 1.6 0.05
C12 -1 to 2.5 0.05
PTG300 Differential Pressure Ranges
RangeCode
barAccuracy
1Accuracy
2
D1 0.0025 0.5 ---
D2 0.01 0.1 ---
D3 0.02 --- 0.5
D4 0.05 --- 0.5
G = Gauge Pressure; Temperature Range forAssuring Accuracy: 1: (0~50)°C.
D = Differential Pressure; Temperature Range forAssuring Accuracy: 1: (20 ±5)°C; 2: (0~50)°C.*For optional threads consult factory.
G = Gauge Pressure; S = Sealed GaugePressure; A = Absolute Pressure; TemperatureRange for Assuring Accuracy: �1: (20~25)°C; 2: (0~50)°C.
ApplicationsFood Storage
Laboratory
Museum
Warehouse
Environmental Monitoring
Fresh and Live GoodsTransportation
HVAC Application
Medical/Pharmaceutical
Display: 6 full digit LCD with LED Backlight.Pressure Units available: User selectable Pa, kPa, MPa, psi, bar, mbar, inH2O, mmH2O, inHgand mmHg depending on range and resolution capabilities of the gauge.Burst Pressure Rating: see reference table pg 5.
Response Time: 0.1mS.
Start/Stop Time: Software programmable start time and date, up to six months in advance.Memory Capacity: 262,143 readings.Compensated Temperature: 32° to 122°F (0° to 50°C). Storage Temperature: -4° to 158°F (-20° to 70°C). Humidity: < 95%.Media Compatible: 0 to 0.16 bar: Non-corrosive Gas compatible, 0.35 to 2500 bar: Liquid, Gasor Steam Compatible with 316SS.Pressure Port: 1/4" NPT. Optional 1/4" to 1/2" SS Adaptor.Over Pressure Warning: 120%.Battery: 3 AA Alkaline batteries, User Replaceable.Battery Life: 1 year at 1 minute reading rate with lithium battery and display off.Reading Rate: Adjustable from 1 reading every 2 seconds to 1 every 24 hrs.Case Material: Aluminum alloy.Wetted Parts: 316L SS. Differential Gauge has Brass internals for clean gasapplications only.Dimensions: 3.9" Diameter X 1.4" Depth X 6.1" Height, incl. Threads (100mm X 37mm X 157mm).Weight: 1 lb (0.45kg).Communication: RS232 (DB9/F, environmentally sealed).Baud Rate: 115200.Software: included, WINDOWS 7 compatible.
bar x 14.5037 = PSI
WARRANTY
Download data to spreadsheet for review.Large Memory - 262,143 Readings.
Note: Pleaseconsult tables onpg 5 for Burst
Pressure Ratingand correctPressure andAccuracy TypeCode desired.
5(800) 421-2853 • FAX (828) 658-0728 • www.palmerwahl.comContinuous Innovation Since 1836
ISO 9001:2008 CERTIFIED
WARRANTY
Specifications subject to change without notice.Register your product at www.palmerwahl.com/register
PW1137 08/14
Compound Pressure Range SelectionRange Code bar mbar PSI inH2O Pa kPa MPa mmHg kgf
C6 ± 0.16 160 2.32060 64.2352 16000.00000 16 0.016 120.009 0.16315
C8 ± 0.4 400 5.80151 160.588 40000.00000 40 0.04 300.024 0.40788
C10 ± 1 1000 14.5037 401.470 100000.00000 100 0.1 750.061 1.01971
C11 -1 to 1.6 -1000~1600 -14.5 to 23.2-401.474 ~642.358
-100000 ~160000
-100~160 -0.1~0.16 -750~1200-1.0197~
1.63
C12 -1 to 2.5 -1000~2500 -14.5 to 36.26-401.474 ~1003.68553
-100000 ~250000
-100~250 -0.1~0.25 -750~1875-1.0197~2.54929
Differential Pressure Range SelectionRange Code bar mbar PSI inH2O Pa kPa MPa mmHg kgf Burst Pressure
D1 0.0025 2.5 0.036 1.00365 250 0.25 0.00025 1875.15 0.00254 3X
D2 0.01 10 0.145 4.01463 1000 1 0.001 7500.61 0.01019 3X
D3 0.02 20 0.290 8.02926 2000 2 0.002 15001.2 0.02039 3X
D4 0.05 50 0.725 20.0731 5000 5 0.005 37503.0 0.05098 3X
G = Gauge Pressure; Temperature Range for Assuring Accuracy: 1: (0~50)°C.
D = Differential Pressure; Temperature Range for Assuring Accuracy: 1: (20 ±5)°C,�2: (0~50)°C.
G = Gauge Pressure; S = Sealed Gauge Pressure; A = Absolute Pressure; Temperature Range for Assuring Accuracy: 1: (20~25)°C; 2 (0~50)°C.
Atmospheric ReferenceType Codes
Code
A Absolute
G Gauge
S Sealed Gauge
Accuracy Codes
Code Accuracy
025 0.025% of Full Scale
050 0.05% of Full Scale
100 0.1% of Full Scale
200 0.2% of Full Scale
500 0.5% of Full Scale
PTG100G050G14 is a Precision Test Gauge, with gauge pressure, 0.05%accuracy, in a range of 3625.94 PSI.Note: Not all model number combinations are available. Please consult the Range Selection tables on each page to assure availability.Also, where range codes are 2 digits instead of 3 digits, disregard the last space in the above example.
Type Series Atmospheric Accuracy RangeReference Type
1 G 0 GPTG
Example of a typical part number configuration:
0 1 40 50
Range Equivalency Tables
Ordering Information
Gauge Pressure Range SelectionRange Code bar PSI inH2O Pa kPa MPa mmHg inHg kgf Burst Pressure
GV -1 -14.504 -401.463 -100,000 -100 -0.1 -750.062 -29.6134 -1.01972 3X
G5 0.16 2.321 64.2340 16,000 16 0.016 120.009 4.73814 0.16315 3X
G6 0.35 5.076 140.512 35,000 35 0.035 262.521 10.3646 0.35690 3X
G7 0.7 10.153 281.024 70,000 70 0.07 525.043 20.7293 0.71380 3X
G8 10 145.038 4014.63 1,000,000 1000 1 7500.61 296.134 10.1971 3X
G9 16 232.060 6423.40 1,600,000 1600 1.6 12000.9 473.814 16.3154 3X
G10 35 507.632 14051.2 3,500,000 3500 3.5 26252.1 1036.46 35.6900 3X
G11 70 1015.26 28102.4 7,000,000 7000 7 52504.3 2072.93 71.3801 3X
G13 160 2320.60 64234.0 16,000,000 16000 16 120009.9 4738.14 163.154 3X
G14 250 3625.94 100365.7 25,000,000 25000 25 187515.4 7403.34 254.929 3X
G15 400 5801.51 160585.2 40,000,000 40000 40 300024.7 11845.3 407.886 3X
G16 600 8702.26 240877.8 60,000,000 60000 60 450037.0 17768.0 611.829 3X
G17 1000 14503.7 401463.0 100,000,000 100000 100 750061.7 29613.4 1019.71 2X
G18 1600 23206.0 642340.9 160,000,000 160000 160 1200099 47381.4 1631.54 2X
G19 2500 36259.4 1003657.6 250,000,000 250000 250 1875154 74033.4 2549.29 1.5X
PressurePumps
(800) 421-2853 • FAX (828) 658-0728 • www.palmerwahl.com6 PW1137 08/14
Continuous Innovation Since 1836ISO 9001:2008 CERTIFIED
Specifications subject to change without notice.Register your product at www.palmerwahl.com/register
PV10K Specifications
The NEW! Palmer PV10K Hydraulic Calibration Pressure Pump isa high quality hand pump designed to quickly and easily generatehydraulic pressures. Its construction makes it compatible withmost fluid media, and an optional seal kit can be supplied foraggressive applications. The built-in vernier provides excellentcontrol and is easy to adjust even at high pressures.
The dual stage pump includes a selector valve which increases thepriming speed and greatly reduces the effort required to generatehigh pressures. Optional pressure relief valve can be supplied toprovide protection to connected instruments.
PV10K Hydraulic Calibration Pressure PumpRange: 0 to 10,000 PSI / 0 to 700 bar
Construction Materials: Series 300 stainless steel, brass, nickelplated brass, PyrexTM, Nitrile, polyurethane and PTFE. Compatiblewith most hydraulic fluids, oils and water.
Dimensions: 9" x 6.25" x 2.75" (228 mm x 159 mm x 70 mm).
Weight: Approximately 3.2 lb (1.4 kg).
Accessories:
PV10A: Accessory Kit, includes Process Adaptors, High PressureHose, Fill Bottle, and Hard Carrying Case.
PV10K-K: Hydraulic Pump Kit, includes PV10K Pump, and PV10AAccessory Kit.
PV10H: Replacement High Pressure Hose Assembly, rated to15,000 PSI.
PV10R: Repair Kit, with O-Rings and Gaskets.
PV10K • Hydraulic Pressure PumpRange: 0 to 10,000 PSI / 0 to 700 bar
• Full time rotation of gauge connection maximizes viewing angleduring operation
• Compatible with distilled water or mineral oil
• Quick priming and pressure generation
• Optional adjustable pressure relief valves
• Hydraulic pressure sources for pressures up to 10,000 PSI (700bar)
• Large volume PyrexTM reservoir can be filled during operation
• Vernier adjust for fine control
• Comfortable, ergonomically designed molded handles
• Pressure release valve offers outstanding control for decreasingpressures
• Brake fluid option available
Features
with 1/4" NPT or BSP Female Connections
Rear Port for optionalpressure relief valve
Vernier forfine adjust
100 cc reservoir
1/4" NPT femaleor x BSP adaptor
Pressurerelease valve
Reservoir fill plug
Fluid inlet tube
Priming/highpressure selector
Scissor handles
↑
↓
WARRANTY
PressurePumps
7(800) 421-2853 • FAX (828) 658-0728 • www.palmerwahl.comContinuous Innovation Since 1836
ISO 9001:2008 CERTIFIED
WARRANTY
Specifications subject to change without notice.Register your product at www.palmerwahl.com/register
PW1137 08/14
PV600 • Combination PneumaticPressure & Vacuum Pump
Range: 28 inHg Vacuum to 600 PSI
Features
The NEW! Palmer PV600 Combination Pneumatic Pressure andVacuum Pump is a lightweight yet high quality combination pressureand vacuum hand pump, designed to provide maximum pneumaticpressures efficiently and effortlessly.
PV600 Combination Pneumatic Pressure and Vacuum PumpRange: 28 inHg Vacuum to 600 PSI.
Construction Materials: Pump comes supplied with 3 ft, 1/8"diameter nylon hose with 1/4" NPT female adaptor.
Construction Materials: Bright nickel plated brass, anodizedaluminum, phosphor bronze (springs), Nitrile, nylon.
Dimensions: 8.5" x 4" x 2.5" (216 mm x 101 mm x 63 mm).
Weight: 1 lb (0.45 kg).
Accessories:
PV600A: Accessory Kit, includes Process Adaptors and HardCarrying Case.
PV600-K: Pneumatic & Vacuum Pump Kit, includes PV600 Pump,and PV600A Accessory Kit.
PV6R: Repair Kit, with O-Rings and Gaskets.
with 1/4" Female Gauge and Process Connections
PV600 Specifications
• Full time rotation of gauge and process connections maximizesviewing angle during operation
• Dual source of pneumatic pressure and vacuum
• Built-in fine adjust vernier
• Needle valve provides controlled pressure release
• Selector valve for vacuum or pressure generation
• Comfortable, ergonomically designed molded handles
• Adjustable stroke
• Extremely efficient - only four strokes to 100 PSI
O-Ring
1/4" NPT femaleadaptor
3 ft 1/8" diameter flexiblenylon hose
Fine adjust vernier
Pressure release valve
Pressure/vacuum selector
Quick fit connector
Adjustablestroke control
1/4" NPT femaleadaptor
Scissorhandles
8
America’s First Manufacturer of IndustrialTemperature and Pressure Instrumentation
Palmer Wahl Warranty
Manufacturer warrants all products listed in this catalog to befree from defects in material or workmanship under normal use andservice. The Manufacturer agrees to repair or replace any productwhich upon examination is revealed to have been defective due tofaulty workmanship or material if returned to our factory, transporta-tion charges prepaid, within the product specific warranty period stat-ed in the catalog by the manufacturer. This warranty is in lieu of allother warranties, expressed or implied and of all obligations or liabili-ties on its part for damages including but not limited to consequentialdamages, following the use or misuse of instruments sold by theManufacturer. No agent is authorized to assume for manufacturer anyliability except as set forth above.
Palmer Precision Pressure Gauges and Pumps are available from:
PW1137 08/14
234 Old Weaverville Road • Asheville, North Carolina • 28804-1228Phone (800) 421-2853 • (828) 658-3131 • Fax (828) 658-0728 • Email: [email protected]
www.palmerwahl.com
CALIBRATION SERVICES
REPAIR AND OTHER SERVICES
STANDARD CERTIFICATION: Unit is calibrated to factory specifications using NIST traceableequipment. Unit is provided with:
Certificate of Conformance - Statement that our product meets published specifications.Included on the packing list with each shipment. “Long Form” Certificate of Conformance - Available upon request. Includes Certificate of Conformance with customer’s PO number, items shipped, and any product serial numbers for products included in the shipment.Calibration Sticker - (or tag) Advising you of the date your instrument(s) was/were calibrated,and the suggested date for the next calibration. This is provided with most products at time ofpurchase, and when you return a product for calibration.
NIST TRACEABLE TEST REPORT: Unit is calibrated to factory specificationsusing NIST Traceable equipment. Unit is provided with:
NIST Traceable Test Report - Provides instrument test data with details of standardinstruments used to perform the calibration. "As Received" and "As Left" Test Data is provided,as appropriate, with any out-of-tolerance conditions noted, and a unique test number assigned.NIST Traceable Calibration Sticker Provides the date your instrument(s) was/were calibrated,technician performing the calibration, suggested date for the next calibration, and references the unique test number shown in the Test Report. Our Quality Management System is certifiedto conform to ISO9001:2008. We maintain a calibration system in conformance with ANSI/NCSLZ-540 and MIL-STD-45662A.
REGISTER YOUR PRODUCT: Registration is fast and easy. In about a minute you can registeryour product for Warranty Protection and our Calibration Reminder Service to keep your QC Program in compliance. Go to: www.palmerwahl.com/registerREPAIR SERVICES: Palmer Wahl offers repair and calibration services on most products we sell. The customer will receive a written estimate for approval before proceeding with work. Repair pricing includes Standard Certification as listed above.
Detailed Repair Report - Available upon request, this report provides details of evaluation and repairs made.Custom Points - Palmer Wahl will calibrate your instruments at your specified temperature or pressure points.Special Requests - When calibrating your instrument, our experienced personnel will help you to achieve the level of quality you requirein your facility. Note: Before returning your product to us please contact us to obtain a Return Merchandise Authorization Number, (RMA).Call Customer Service at 1-800-421-2853 or go to www.palmerwahl.com and click on: Service > Product Return Request.
Register your product at www.palmerwahl.com/register
Wahl designs and manufactures to the most stringent quality standards. We provide certified, traceable calibration data in support ofcompanies whose requirements include meeting ISO 9001:2008, FAA and FDA quality standards. Calibrations to both IPTS-68 and ITS-90are available. Choose from two levels of calibrations services to meet your quality system requirements.
Why you need to Calibrate your Instruments
• Increase customer satisfaction with consistent products.
• Comply with quality standards.
• Improve product quality.
• Ensure traceability throughout yourentire manufacturing process.
• Palmer Wahl can calibrate yourequipment for you. We also offer a complete line of Calibrators tointegrate all the necessaryfunctions for adjustment andmaintenance of your process.
• We make it easy to use our products and services, and Palmer Wahl is there to help every step of the way.
ISO 9001:2008CERTIFIED QUALITY
MANAGEMENT SYSTEM