Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
POWERMAX™ DIRECT FIT PERFORMANCE INTERCOOLERS
2016+ Honda Civic 1.5T / SI (PN:893516-6001)
arrett direct fit performance intercoolers are engineered for enthusiasts that want increased vehicle performance while
maintaining OEM fitment. Advanced CFD combined with bar and plate core technology results in lower intake temperatures that increase heat saturation point.
G
REPLACE HEAT WITH HORSEPOWER2016+ Honda Civic 1.5T / SI (PN:893516-6001)
Garrett Powermax™ direct fit performance charge air cooler for the 2016+ Honda Civic 1.5T/SI has a 90% larger core than stock and helps reduce intake manifold temperatures up to 60 °F (15.6 °C) at heat soak. CFD optimized end tanks improve air flow distribution through the core. This performance intercooler showed a max increase of up to 17 WHP (12.7 kW) and 14 lb-ft of torque (19 N-m) compared to OE during back to back dyno comparisons in a wind tunnel which generates air velocity that matches vehicle speed.
This direct fit performance intercooler installs in 3 hours and reuses the stock bolts, hoses, and clamps. Somemodification to the shroud required. For more information including Installation instructions please visitwww.garrettmotion.com/racing-and-performance/performance-catalog/intercoolers/
Features: • Supports up to 660 HP (492 kW)• 90% larger core than stock• Installs in stock location• Max increase of 17 HP (12.7 kW) and 14lb-ft (19 N-m) • Up to 60 °F (15.6 °C) reduction in intake temp• Cast aluminum end tanks• Advanced offset fin design• Bar-and-plate construction
893516-6001
Make Honda
Model Civic
Year 2016+
Type 1.5L/SI
Fuel Gas
Weight
Size Specs
Part Number
Vehicle
Engine
12.56 kg
27.5" x 3.5" x 6.2"
698.5mm x 88.9mm x 157.5mm