Power Systems Model280 - movariamovaria.com/catologos-productos/PureCycle Pratt Intro.pdf · Pratt&Whitney.The Eagle is everywhere .TM Manufactured to Maximize Customer Satisfaction

Model 280PureCycle® Power System

Pow

erSy

stem

s

Pratt & Whitney Power Systems is a world leader indeveloping and producing energy solutions for powergeneration, transportation and mechanical driveapplications. We are committed to providing

high-quality solutions for the distributed energy marketthat increase energy productivity, energy reliability andoperational savings for our customers. With a technology builton decades of United Technology Corporation’s innovation andoperating experience, Pratt & Whitney Power Systems is pleasedto introduce the PureCycle Power System Model 280 advancedpower solution to the commercial marketplace.

The PureCycle Power System Model 280 energy solutionharnesses the earth’s own heat to power a turbine, turning arenewable resource into 280 kW of electrical power with zeroemissions. This modular energy solution can operate on a widerange of fluid resource temperatures starting as low as 195°F(91°C). Based on a thermodynamic cycle known as the OrganicRankine Cycle, the PureCycle Power System converts low- tomoderate-temperature resource fluids to electric power throughthe vaporization and expansion of a working fluid in a closedsystem. This energy solution offers expanded bottomingopportunities and can operate in coproduced fluid applications.In the ultimate recycling loop, all water extracted for power isreturned to the earth for reheating and reuse. Such dependable,renewable fuel means secure base-load energy production andfreedom from reliance on oil, natural gas, high wind and sunnyweather, without sacrificing precious water resources.

Sustainability makes good economic sense. And it’s achievabletoday with the PureCycle Power SystemModel 280 energy solution.

Pratt & Whitney. The Eagle is everywhere.TM

Emission-Free Energy from a Renewable Resource

Benefits• Free fuel

• Zero emissions

• Renewable power generation

• 195°F to 300°F (91°C to 149°C) resource range

• Modular and scalable for larger plants

• 24/7/365 remote monitoring

• High availability

• Standardized components and assembly processes

• Backed by Pratt & Whitney Power Systems

19 ft(579 cm)Maximum

Front View

3 ft, 6 in.(108 cm)

3 ft, 4 in.(104 cm)

9 ft(274 cm)

7 ft, 6 in.(229 cm)

Side Views

2 ft, 1 in.(63.5 cm)

Top View

7 ft, 6 in.(229 cm)Maximum

11 ft, 3 in.(343 cm)Maximum

Back View

System DescriptionWorking fluid R245fa (pentafluoropropane)**Heat source Hot water 195° to 300°F (91° to 149°C)Cooling requirement Water 40° to 110°F (4° to 43°C)Controls Carrier Netlink II PLCRemote monitoring Web-based gatewayOperation Designed for unattended operationEnclosure Not requiredManufacture Factory assembledShipping Single-drop flatbed truck

PureCycle® Power SystemEmission-Free Energy from a Renewable Resource

Product Facts

Pratt & Whitney Power Systems

1-866-POWER-ALL (1-866-769-3725)Outside USA: 1-860-565-0140E-mail: [email protected]

www.pw.utc.com

Equipment DimensionsLength 19 ft (579 cm)—MaximumWidth 7 ft, 6 in. (229 cm)—MaximumHeight 11 ft, 3 in. (343 cm)—Maximum installed (10 ft, 4 in., shipping height)Weight 27,600 lb dry (12,519 kg)

PS-S0004.03.09

Performance CharacteristicsElectric power (gross) 280 kW @ 480V/3 phase/60 Hz, 272 kW @ 400V/3 phase/50 HzElectric power (net) 225 to 260 kW*Ambient operation -22° to 122°F (-30° to 50°C)Power factor > 0.95 laggingTotal harmonic distortion < 5%Emissions Zero (closed binary cycle)Noise 78 dBA at 33 ft (10 m)

Design AttributesPlumbing ASME B31.1Turbine Radial inflowGenerator InductionHeat exchangers ASME Section VIIIEnclosure, electrical NEMA 4/IP65Design life 20 yearsLubrication Integrated internal oil lubricationUL components UL 1995, 984 and 1741Transient voltage/surge suppression at utility interface IEEE C 62.41-1980 (R1995)Utility grid-connect protective relaying function IEEE 1547

* Resource-water- and cooling-water-dependent. ** R245fa is a nonflammable, nontoxic and nonozone-depleting working fluid.

The manufacturer reserves theright to change or modify, withoutnotice, the design or equipmentspecifications without incurringany obligation either with respectto equipment previously sold or inthe process of construction. Themanufacturer does not warrant thedata on this document. Warrantedspecifications are documentedseparately.


Pow

erSy

stem

s

Capitalizing on almost 50 years of experience inthe design and production of power-generatingequipment, Pratt & Whitney Power Systemsintroduces the PureCycle® Power System

Model 280, a power solution that offers industry-leadingquality, unbeatable overall value, unmatched delivery speedand flexibility.


Manufactured to Maximize Customer Satisfaction

Speed of Delivery

• High-volume flow lines at multiple industry-leading integrators are designed for anddedicated to the PureCycle® Power System product.

• Standardized assembly processes allow for seamless production to rapidly meetcustomer-unique requirements.

• Supplier input, incorporated from early in the design process, maximizesproducibility.

• Pratt & Whitney continuous improvement tools are implemented throughout thesupply chain.

PureCycle® Power SystemManufactured to Maximize Customer Satisfaction



www.pw.utc.com

PS-S0003.04.09

Quality

• High-volume components produced to strict tolerances allow for standardizedassembly processes, yielding a tightly controlled power plant that is ready forsite installation.

• Pratt & Whitney Power System’s quality and engineering organizations continuouslyinteract with manufacturing, operations, and the supply base, capturing and resolvingquality issues and sharing lessons learned.

• Pratt & Whitney quality tools, such as mistake proofing, process certification andrelentless root cause analysis (RRCA), are promoted throughout the supply chain.

• Key quality and production certifications, including ISO 9001:2001, are maintainedthroughout the supply base.

Overall Value

• Units are manufactured and tested in tightly controlled factory environments.

• Units are shipped to the customer as a fully integrated assembly using standardtrucking, minimizing shipping time, costs and time required for installation andinitial start-up.

• Modular design, standardized components and high volume lead to a higher valueproposition for the customer.

• Pratt & Whitney provides significant purchasing, quality and service leverage andaccess to world-class manufacturing, quality and validation resources.

Benefits

• Free fuel

• Zero emissions









Pow

erSy

stem

s

Pratt & Whitney Power Systems teams with RaserTechnologies to generate renewable geothermalpower in the Western United States.

“Geothermal is clean and green, and it’s abundant,especially in Utah. Unlike wind and solar, geothermal

energy provides us a renewable source of base power. If weare interested in reducing carbon emissions on a significantbasis, we must increase our geen sources of base power.”

—Senator Orrin Hatch of Utah


Renewable Geothermal Power from Low-Temperature Resources

PureCycle® Power SystemRenewable Geothermal Power from Low-Temperature Resources



www.pw.utc.com

PS-S0001.04.09

“Deployment of a low-temperature geothermal power plant opens the way fordeveloping low- to medium-temperature geothermal resources that werepreviously thought insufficient for commercial power generation. The versatilemodular generation technology employed in this project can be tailored to matchlocal resources and to accommodate changing loads, demonstrating the growingpotential of geothermal energy to provide clean, renewable, domestic,baseload power.”

–Ed Wall, Program ManagerGeothermal Technologies Program with the Department of Energy

The first site was commissioned in 1st quarter 2009.

The 250 units installed at the first five sites will generate 50+ MWs of renewable electricity.

Pratt & Whitney Power System’s PureCycle®Power System uses innovative technologyto tap low-temperature resources that were previously thought to be uneconomical forcommercial power production.

Power plants can quickly be built due to the modulardesign of the power generation units

Fifty units work in tandem to create a 10MW+ netpower plant.

A July 2008 arial view of the site shows two drillingrigs, the concrete foundation for the cooling towers,and foundation preparation for the generator array.

Benefits

• Free fuel

• Zero emissions









Pow

erSy

stem

s

A large number of geothermal resources are associatedwith oil and gas wells that were previously noteconomically viable for power generation. Many ofthese wells are considered nonproductive because

of their high-volume water content and relatively lowpercentage of oil. With the introduction of the PureCycle®

Power System, these coproduced geothermal hot waterresources, abundantly available in many oil and gas sites,can now be used to produce renewable electric power.


Renewable Energy from Oil and Gas Fields

PureCycle® Power SystemRenewable Energy from Oil and Gas Fields



www.pw.utc.com

PS-S0002.04.09

These applications would result in more efficient oil and gas production withsignificant positive environmental impact. The economic and energy independenceimpacts from power production via coproduced fluids could be considerable. Theinnovative PureCycle Power System technology offers the possibility of tappingprevalent U.S. and global geothermal resources—a continuous, renewable sourceof power to meet the world’s growing energy demands.

The on-site power generation reduce grid electric consumption.

This project will demonstrate and validate Pratt & Whitney Power System’s geothermalORC power plant application on Quantum’s oil and gas fields.

Quantum Resource Management LLC, owner of active oil and gas recovery operationsin Florida, is partnering with Chena Power LLC, Alaska, to utilize the 120,000 barrelsper day of coproduced water for generating on-site power using the PureCycle®

Power System from Pratt & Whitney Power Systems.

Separator tank used to capture and store solids fromthe process stream entering the oil plant

The PureCycle® Powwer System will be located infront of the separator tank as close to the highesttemperature point in the stream as practically possible.Pratt & Whitney Power System’s PureCycle Power System Model 280 was selected as

the demonstrator platform with equipment cost covered by DOE grant.

Technology Development Plan• Operation utilizing low-temperature-resource water (170° to 195°F)• Component optimization including condenser cooling system/working fluidspecification/turbine performance

• Source water quality• Parasitic load balance

Timing/Success Criteria• 2009 delivery—PureCycle Power System Model 280• Demonstrate economic viability of an ORC system for coproduced water in anoil/gas field application

• Meet DOE Geothermal Technologies Program (GTP) required project deliverables

Benefits

• Free fuel

• Zero emissions








Refrigerant Pump

Condenser

TOP LEVEL ASSEMBLY

Electronic Control System (ECS)

Customer coolant water exit

Customer coolant water inlet

Thermal source inlet

Evaporator

Thermal source exit

Turbine

Documents

Power Systems Model280 - movariamovaria.com/catologos-productos/PureCycle Pratt Intro.pdf · Pratt&Whitney.The Eagle is everywhere .TM Manufactured to Maximize Customer Satisfaction