Box 39, 74 Main StreetRosenort, Manitoba

Canada R0G 1W0

866.467.7207sales@wheatheart.comwheatheart.com

TRANSFER AUGERS

Versatile transfer augers in 8" and 10" diameters with choice of gas, electric or hydraulic drive. 13" transfer augers in hydraulic drive only. These low profile (just 12 1⁄2" at the hopper back) transfer augers fit under the lowest hopper bottoms. Balanced for easy moving, while hanger bushing eliminates tube chatter.

10" DOUBLE DRIVE HYDRAULIC• U-joints are eliminated using multiple drives• Double drive on the 10” features 2 orbit motors• Smoother, faster, quieter operation

ELECTRIC DRIVEOffers smooth operation.

HYDRAULIC DRIVEIncludes valve and orbit motor with easy access control of two 10" hydraulic motors.

GAS DRIVEQuick detach plate with reduction gearbox for easy starting under load. 8" - 5.5 hp Honda. 10" - 9 hp Honda.

POLY TRANSTERJUST 125 LBS. THE LIGHT WEIGHT ALTERNATIVE!Only available in hydraulic drive. Our poly hopper and 9” tube reduces weight (only 125 Ibs) and resists corrosion. Easy, one person handling and storage. The 8'2" length stores horizontally on semi trailers for legal transport. Adjustable discharge angle for low trailers.

POWER SWINGS

Get the job done faster with Wheatheart’s newly designed Power Swing. Available in 12V Electric or Hydraulic drive, the Power Swing features:

• Top wind jack to adjust wheel traction • Large lug tires for positive grip• Two wheel drive design • Easy installation

HYDRAULIC POWER SWING• Hydraulic drive moves swing hopper• Convenient tube mounted control valve• Complete with hydraulic hoses

REMOTE 12V ELECTRIC POWER SWING• Heavy-duty 12 volt motor• Position hopper from cab of truck• Large “easy grip” remote• Secondary control on tube if remote is not available

We know you work long and hard, especially during harvest. Please take the time to put safety FIRST!

Wheatheart augers are designed with operator safety in mind and incorporate many safety features. Everyone operating an auger must read and understand the operator’s manual and safety decals before attempting to operate the unit. Do not modify the implement in any way. Use only for intended purposes. Keep all safety shields in place while operating. Never operate with any safety shields or guard removed or modified. Never transport the unit in a raised position. Check overhead before raising. Never attempt to service the auger while it is running. Keep children, pets and untrained personnel away from work area.

SAFETY FIRST!

Gra

in H

and

lin

g A

cces

sori

es

GRAIN HANDLING ACCESSORIES wheatheart.com

SUPERSWEEPSHYDROSTATIC BIN SWEEPS MOVE MORE GRAIN FASTER!

SuperSweep is the biggest and cleanest bin sweep yet, with high-capacity, cupped 8" flighting that moves grain fast. The backboard, with handles scrapes floors clean in one pass and the variable speed orbital motor lets the operator control grain flow to the auger intake. Excellent for field piled grain and aerated floors.

STANDARD SUPERSWEEPThe self-contained unit on the auger includes hoses, pivot assembly, all mounting brackets, 10' of SuperSweep flighting, relief valve and Hydraulic Pump Kit (188 lbs).

PORTABLE STANDARD SUPERSWEEPPortable power cart unit with 9 hp Honda engine, 7 gallon hydraulic oil reservoir, portable chain clamp, hydraulic motor and pump on wheeled cart for ease of movement over any terrain. Also includes 18' hose and 10' SuperSweep flighting (345 lbs).

TRUCK MOUNT SUPERSWEEPOperated by truck or tractor hydraulics and comes with 10' of SuperSweep flighting, relief valve, two 6" hoses and pivot assembly (145 lbs).

SuperSweep U-Joint Backboard

Cleans the last of the grain accumulated near the auger intake when SuperSweep is run. The U-joint backboard clips onto existing backboards and is anchored to the hydraulic motor.

SuperSweep U-Joint Backboard

SELF-PROPELLED TRANSPORTKITS TO FIT MOST AUGERSNEVER PUSH, PULL OR LIFT AN AUGER AGAIN!

With Wheatheart’s Self-Propelled Auger Transport Kit, one person can move the largest auger with ease. Our add-on package, which fits all auger makes, features a central control panel to raise, lower and drive the auger. The kit comes complete with all necessary brackets, pulleys, valves, hoses, fittings, winch kit and dolly wheel frame.

Added Safety

The hydraulic winch kit. standard with all self-propelled kits, features a self-locking gear speed reducer to prevent accidental dropping.

Maximum Traction

The auger wheels become the hydraulically driven drive wheels. Most of the auger weight is on these wheels to enhance traction on soft ground or snow.

Standard with all mover kitsDisengage prior to transport behind a truck or tractor

HEAVY-DUTY SELF PROPELLED KITSDesigned for larger 8" and 10" augers over 53'. Heavy-duty tandem castor wheels with “walking beam” design carry the load for effortless operation. The auger wheels are the drive wheels for maximum traction. Custom built kits available for larger augers.

TRY THESE OPTIONSR & GHR HOPPERWheatheart’s intake hopper for your R or GHR auger makes it easier to unload bins and fill trucks without the hassle of a poly hopper. • Available in 8" and 10" models• Optional wheel kit with adjustable height• Wear Edge flight in hopper• Self-leveling hopper with tapered transition neck• Easy clean out with removable access plate• Complete with tow hitch and fixed position stabilizer bar

10" 13"Capacity up to 4,800 bu/hr up to 7,500 bu/hr

Lengths 20'4" w/ hitch 20'4" w/ hitch

Transport Width 69" 69"

Operating Deck Height 7' 3/8" 7' 3⁄8"

Weight Gross 2450 lbs; Hitch 950 Ibs Gross 2550 lbs; Hitch 975 lbs

Side Discharge Hopper 36" w x 25"; 1 opening 36" w x 25"; 1 opening

Main Hopper 44" w x 48"; 1 opening 44" w x 48"; 1 opening

Discharge Auger Length: 7' x 10" Height : 27" in operating position Length: 7' x 13" Height: 27" in operating position

Hydraulic Power Requirements 15 gpm @ 1500 psi 15 gpm @ 1500 psi

Electric Power Requirements 7.5-10 hp 14-20 hp

Tires 15" 15"

ELECTRIC CLUTCHAllows operator to start and stop the auger without shutting down gas engine drives. Quick installation and controls at intake end of auger. Fill truck boxes to optimal levels and provide another level of safetyshutdown during operation.

PORTABLE PITIDEAL FOR HIGH VOLUME HARVESTERS - NOW IN 10” AND 13” SIZES

Establish a Fast Grain Transfer Operation Anywhere.

Features low profile (7⁄8" operating deck), minimal maintenance design and hydraulic drive.

The 10" pit has dual 6" horizontal augers and 10" x 7' discharge. 13" pit has three 6" horizontal augers and 13" x 7' discharge.

Large side hopper accommodates side discharge grain carts. Spring assisted ramps and rear mounted hydraulic axle for easy transport. Availble in hydraulic and electric drive.

POLY HOPPERSDurable, flexible poly hoppers allow easy dumping with minimum spillage. V-style hopper fits augers sizes from 4" - 13" in diameter. Large round hopper fits augers 8" and 10" diameter.