Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Hybrid Materials 2011|Poster Programme
POSTER SESSION 1 Sunday 6th March, 19:00 – 20:45
Poster number Poster Presenter Title, Authors & Affiliations
Symposium A – Bioinspired
[A.1.1.1] I.N. Rezzano
Peroxide activation catalyzed by a complex between copper ions and a bioinspired polyampholyte: mechanism and applications. J.M. Lázaro Martínez
1, E. Rodríguez Castellón
2, L.R. Denaday
1, G.Y. Buldain
1,
I.N. Rezzano*1, V. Campo Dall Órto
1,
1University of Buenos Aires, Argentina,
2University of Málaga, Spain
[A.1.1.2] K. Katagiri
On-demand release from hybrid liposomes formed with Fe3O4 nanoparticles and thermosensitive polymers via magnetic field irradiation K. Katagiri*
1, Y. Imai
1, K. Koumoto
1, T. Kaiden
2, K. Kono
2, S.
Aoshima3,
1Nagoya University, Japan,
2Osaka Prefecture University, Japan,
3Osaka University, Japan
[A.1.1.3] M. Hirai Novel injectable chitosan-silicate hydrogels for bone defect-filling applications M. Hirai, Y. Shirosaki*, S. Hayakawa, A. Osaka, Okayama, Japan, Japan
[A.1.1.4] J. Li Sol-gel preparation of mm-sized apatite/silica hybrid porous particles from water glass J. Li, Y. Shirosaki*, S. Hayakawa, A. Osaka, Okayama University, Japan
Symposium A – Biomimetic materials
[A.1.2.1] S.K. Saha
Stimuli responsive viscoelasticity of entangled and H-bonded polymer like aggregates: morphological transitions induced by pH, temperature and shear. S.K. Saha*, University of North Bengal, India
[A.1.2.2] I.N. Rezzano
Applications of a bioinspired polyampholyte: sorbent for proteins and mimic manganese peroxidase. L.R. Denaday, M.V. Miranda, J.M. Lázaro Martínez, I.N. Rezzano*, V. Campo Dall Orto, University of Buenos Aires, Argentina
[A.1.2.3] M.S. Saeedi-Fakher
Olefin epoxidation with NaIO4 catalyzed by reuseable mangenese (III) salophen supported on multi-wall carbon nanotubes under ultrasonic irradiation M.S. Saeedi-Fakher*, D. Karimian, S. Tangestaninejad, M. Moghadam, V. Mirkhani, I. Mohammadpoor, University of Isfahan, Iran
[A.1.2.4] D. Campos Osteoprogenitor cells cultured on collagen-hydroxyapatite using bioreactor D. Campos*
1,2, G. Soares
1, K. Anselme
2,
1IS2M, France,
2UFRJ, Brazil
[A.1.2.5] Y. Wang Biomimetic synthesis of bone-like matrix Y. Wang*, N. Nassif, L. Bonhomme-Coury, T. Azaïs, M.M. Giraud-Guille, F. Babonneau, Laboratoire de Chimie de la Matière Condensée de Paris, France
[A.1.2.6] R.E. Lyons
Resilin-inspired proteins and biomaterials: current progress towards the understanding and material application of these proteins. R.E. Lyons*
1, N. Lekieffre
1, M.G. Huson
2, K.M. Nairn
3, M. Kim
1, D.
Wong1,
1CSIRO Livestock Industries, St Lucia,, Australia,
2CSIRO Materials
Science and Engineering, Australia, 3CSIRO Materials Science and Engineering,
Australia
Symposium A – Biomineralisation
[A.1.3.1] D. Joester Atom probe tomography of buried organic-inorganic interfaces in biominerals L. Gordon, D. Joester*, Northwestern University, USA
[A.1.3.2] J.W. Xiao
Polymorphism of aragonite and calcite from amorphous calcium carbonate precursor mediated by the functional groups of organic molecule templates J.W. Xiao*, S.H. Yang, Hong Kong University of Science and Technology, China
[A.1.3.3] M. Lee
Mussel-inspired polydopamine coating as a universal route to hydroxyapatite biomineralization M. Lee*, J. Rye, S.H. Ku, H. Lee, C.B. Park, Korea Advanced Institute of Science and Technology, South Korea
[A.1.3.4] A.B.H. Dangerfield Chitosan effects on crystal growth from solution A.B.H. Dangerfield*
1,2, K.M. McGrath
1,2,
1Victoria University of Wellington, New
Hybrid Materials 2011|Poster Programme
Zealand, 2
McDiarmid Institute for Advanced Materials and Nanotechnology, New Zealand
Symposium A – Biosystems (sensors, catalysts, vectors, imaging)
[A.1.4.1] A.B. Jarzebski
Are there any better enzyme carriers than mesoporous silicates? Yes those with extensive multimodal pore structure K. Szymanska
1, A. Czardybon
1, W. Pudlo
1, K. Walczak
1, J. Mrowiec-Bialon
1,2,
A.B. Jarzebski*1,2
, 1Silesian University of Technology, Poland,
2Institute of
Chemical Engineering, Polish Academy of Sciences, Poland
[A.1.4.2] N. Talebian Synthesis, characterization and antibacterial properties of SnO2, ZnO and SnO2/ ZnO nanocomposites films N. Talebian*, E. Badri Zargar, Islamic Azad University, Iran
[A.1.4.3] E.T. Hwang
Highly stable hybrid systems of enzymes-nano/micro sized organic/inorganic materials E.T. Hwang*, R. Tatavarty, H. Lee, J.H. Kim, M.B. Gu, Korea University, South Korea
[A.1.4.4] J.H. Kim Hybrid microbeads with aptamers for affinity-based protein purification J.H. Kim*, E.T. Hwang, R. Tatavarty, M.B. Gu, Korea University, Korea, Democratic People's Republic of
[A.1.4.5] P. Aranda Moved to Session 3
[A.1.4.6] M.E. Perez-Ojeda
New hybrid nanostructured dyes for biophotonic applications M.E. Perez-Ojeda*
1, B. Trastoy
2, A. Costela
1, I. Garcia-Moreno
1, J.L.
Chiara2,
1Instituto de Química Física "Rocasolano", Spain,
2Instituto de Química
Orgánica General, Spain
[A.1.4.7] A.L. Shimkevich Helical density fluctuations of water as templates for building component parts of biosystems * A.L. Shimkevich*, I.Y. Shimkevich, RRC "Kurchatov Institute", Russia
[A.1.4.8] F. Bouyer
Functionalization and internalization of magnetic nanoparticles and evaluation of their biological activities on murine oligodendrocytes 158N F. Bouyer*
1, L. Maurizi
1, N. Millot
1, J. Bruniaux
2, F. Masson
2, G.
Lizard2,
1Laboratory ICB - UMR 5209 CNRS, France,
2Laboratory of Metabolic
and Nutritional Biochemistry - INSERM U866, France
[A.1.4.9] S.W. Jung
Electrical and optical studies on the interaction between ssDNA/SWNT hybrid and complementary sequence S.W. Jung*
1,2, M.S. Cha
3, J. Das
1, J.H. Lee
1,2,
1Mechanical & Aerospace
Engineering, Seoul National University (SNU), South Korea, 2
Inter-university Semiconductor Research Center, SNU, South Korea,
3Institute of Advanced
Machinery and Design, SNU, South Korea
[A.1.4.10] J.D. Brennan Moved to Session 3
Symposium A – Green Materials
[A.1.5.1] Z.S. Liu Green materials prepared by using a green processing method: plant oil based polymers prepared in CO2 medium with mild conditions Z.S. Liu*, NCAUR/ARS/USDA, USA
[A.1.5.2] C.F. Meunier Design of functional bio-hybrid materials for environmental purposes via the encapsulation of plant cells C.F. Meunier*, P. Van Cutsem, B.L. Su, University of Namur, Belgium
[A.1.5.3] P. Haller
Numerical and experimental investigation on wooden profiles with fiber confinement J.M. Cabrero
1, A. Heiduschke
2, P. Haller*
2,
1University of Navarra, Spain,
2Technische Universität Dresden, Germany
[A.1.5.4] D.F. Schmidt Green resins as alternative binders S. Sivasubramanian, K. Jafferji, D.F. Schmidt*, E. Reynaud, University of Massachusetts Lowell, USA
[A.1.5.5] N.A. Begum
In search of biogenic agents for the synthesis of metal nanoparticles with tailor-made structural properties N. Roy, S. Mondal, R.A. Laskar, D. Mandal, N.A. Begum*, VISVA Bharati University, India
[A.1.5.6] N. Baccile
Hydrothermal carbon from biomass: fine structural analysis by 13C solid state NMR and comparison with pyrolysis-derived carbons N. Baccile*
1, F. Babonneau
1, M.M. Titirici
2, M. Antonietti
2,
1LCMCP-UPMC-
CNRS-Collège de France, France, 2Max-Planck Institut, Colloid dpt., Germany
[A.1.5.7] S. Iannace Bionanocomposites based on thermoplastic zein and montmorillonite I. Nedi
2, E. Di Maio
2, S. Iannace*
1,
1IMCB-CNR, Italy,
2DIMP-University of
Naples "Federico II", Italy
Hybrid Materials 2011|Poster Programme
Symposium A – Other
[A.1.6.1] D. Kalfa
A bioabsorbable polydioxanone electrospun cell-seeded device to replace the right ventricular outflow tract in congenital cardiac diseases D. Kalfa*
1, A. Bel
2, A. Chen-Tournoux
1, V. Bellamy
1, J. Larghero
3, P.
Menasché1,2
, 1INSERM U633, Laboratoire de Recherches Biochirurgicales,
France, 2
Assistance Publique-Hôpitaux de Paris APHP, Hôpital Européen Georges Pompidou HEGP, University Paris Descartes,, France,
3APHP, Hôpital
Saint-Louis, Laboratory of Cell Therapy; University Paris Diderot, France
[A.1.6.2] I. M. Miranda Salvado
Zirconium-containing organic-inorganic hybrids with potential applications as bone bonding materials M.S.M.S. Nabiça
1, A.M.B. Silva
1, I. M. Miranda Salvado*
1, M.H.V. Fernandes
1,
F.M.A. Margaça2, L.M. Ferreira
2,
1University of Aveiro, Portugal,
2UFA; Nuclear
and Technological Institute, Portugal
[A.1.6.3] G. Rytwo
Adsoption of two vaccine-related proteins to an hybrid organo-montmorillonite G. Rytwo*
1,2, A. Mendelovits
1,3, D. Eliyahu
2, J. Pitcovski
1,2, E. Aizenshtein
2,
1Tel
Hai College, Israel, 2MIGAL, Israel,
3HUJI, Israel
[A.1.6.4] R.X. Yuan Two new tridentate polypyridyl nickel(II) and copper(II) complexes X.Y. Tang, Y.S. Ma, R.X. Yuan*, Changshu Institute of Technology, China
[A.1.6.5] H. Ahmadi An experimental study of the aluminum sequence effect on the ballistic response of glare H. Ahmadi*, H. Sabouri, G. Liaghat, Tarbiat Modares University, Iran
[A.1.6.6] T. Luessenhop
Polymer based antibacterial coatings for biomedical applications T. Luessenhop*
1, O. Kufelt
1, M. Badar
2, P.P. Mueller
2, P. Behrens
1,
1Leibniz
Universität Hannover, Institut für Anorganische Chemie, Germany, 2
Helmholtz Institut für Infektionsforschung, Germany
[A.1.6.7] E. Villemin
Metal complexes with phosphonated cage-molecules obtained by [4+2]cycloadditions E. Villemin*
1, B. Elias, J. Marchand-Brynaert, Université catholique de Louvain
(UCL), Belgium
[A.1.6.8] N. Čuk Application of liquefied wood in particleboard production N. Čuk*
1, S. Medved
2, M. Kunaver
1,
1National Institute of Chemistry, Slovenia,
2University of Ljubljana,Slovenia
Symposium A – Synthetic/biopolymer conjugates
[A.1.7.1] O. Altintas
Single chain self-assembly: preparation of a,w-donor-acceptor chains via living radical polymerization and orthogonal conjugation O. Altintas*, P. Gerstel, N. Dingenouts, C. Barner-Kowollik, Karlsruhe Institute of Technology, Germany
[A.1.7.2] M. Ramezani
Targeted delivery of nanoparticle-aptamer conjugates to acute lymphoblastic leukemia T-cells M. Ramezani*
1, K. Abnous
1, N. Shahidi
2,
1Pharmaceutical Research Centre,
Mashhad University of Medical Sciences, Iran, 2
Mashhad University of Medical Sciences, Iran
[A.1.7.3] J.S. Park Polyurethane foam containing alginate hydrogel loaded with epidermal growth factor J.S. Park*, S.T. Oh, Seoul National University, South Korea
[A.1.7.4] P. Sricharoon
The synthesis of rigid polyurethane foam containing palm oil, poly (L--lactide) and tapioca starch P. Sricharoon*, S. Piboonsin, King Mongkut's University of Technology Thonburi, Thailand
[A.1.7.5] F. Audouin
Synthetic polymer/polypeptide hybrids by cross-linking of linear poly(benzyl-L-glutamate) macromonomers via free-radical and RAFT polymerization F. Audouin*
1, R.J.I. Knoop
2, J. Huang
1, A. Heise
1,2,
1Dublin City University,
Ireland, 2
Technische Universiteit Eindhoven, Laboratory of Polymer Chemistry, The Netherlands
[A.1.7.6] N. Polikarpov Towards the development of multi-release systems N. Polikarpov*, D. Appelhans, B. Voit, Leibniz Institute of Polymer Research Dresden, Germany
Symposium B – Applications
[B.1.1.1] Y.C. Dong Polymeric nanoparticles by nanoprecipitation: continuous and high-throughput production in static mixers
Hybrid Materials 2011|Poster Programme
Y.C. Dong*1, W. Ng
1, S.C. Shen
1, K. Sanggu
1, R.B.H. Tan
1,2,
1Institute of
Chemical Engineering & Science, Singapore, 2
National University of Singapore, Singapore
[B.1.1.2] N. Taheri Qazvini
Effect of confinement geometry on ionic conductivity of solid polymer electrolytes: 1D and 2D vs. random nano-confinement N. Taheri Qazvini*
1, Z. Shakouri
2, M. Karimi
2, S. Ghanbar
2,
1University of
Tehran, Iran, 2Amirkabir University of Technology, Iran
[B.1.1.3] N. Talebian
Sonolytic, photocatalytic and sonophotocatalytic degradation of azo dye: comparison of catalytic activities of nano-sized SnO2, nano-sized ZnO and nano-composite SnO2/ZnO powders synthesized using solvothermal method N. Talebian*, M.R. Nilforoushan, F. Jazaeri Mogaddas, Islamic Azad University, Iran
[B.1.1.4] D.H. Min Application of silica nanoparticles with very large pores in gene delivery D.H. Min*, KAIST, South Korea
[B.1.1.5] I. Imae
Synthesis of polysilsesquioxane having oligothiophene and its optical, electrochemical, electrical and mechanical properties I. Imae*, D. Tokita, Y. Ooyama, K. Komaguchi, J. Ohshita, Y. Harima, Hiroshima University, Japan,
2Kuraray, Japan
[B.1.1.6] S. Hartmann
Hierarchically organized Al2O3 monoliths as potential supports in catalysis in continuous flow S. Hartmann*
1,2, A. Galarneau
1, F. Lefebvre
2, B. Coq
1, J.M. Basset
2,
1Institut
Charles Gerhardt Montpellier, France, 2Laboratoire de Chimie Organometallique
de Surface, France
[B.1.1.7] M. Sartor Prevention of high-temperature corrosion in steel re-heating by diffusion-inhibiting coatings M. Sartor*, T. Reichardt, VDEh-Betriebsforschungsinstitut GmbH, Germany
[B.1.1.8] N. Krstajic
Kinetics of hydrogen oxidation reaction on MoOx-Pt / C electrode in the presence of chemisorbed CO N. Krstajic*
1, L. Gajic-Krstajic
2, N. Elezovic
3, L. Vracar
1,
1Faculty of Technology
and Metallurgy, Serbia, 2Institute of Technical Sciencies-SASA, Serbia,
3Institute
of Multidisciplinary Research, Serbia
[B.1.1.9] K. Heuzé
Dendron-functionalized core-shell superparamagnetic nanoparticles: magnetically recoverable and re-usable catalysts for suzuki C-C cross-coupling reactions D. Rosario-Amorin
1, X. Wang
1, M. Gaboyard
2, R. Clérac
3, S. Nlate
1, K.
Heuzé*1,
1Université de Bordeaux 1, France,
2Ademtech SA. Parc Scientifique
Unitec, France, 3
CNRS, Université Bordeaux 1, Centre de Recherche Paul Pascal (CRPP), France
[B.1.1.10] J.C. Echeverria Simultaneous effect of preparation variables on the permeance and permselectivity of RTEOS/TEOS membranes J. Araiz, A. Navajas, J.C. Echeverria*, Universidad Pública de Navarra, Spain
[B.1.1.11] T.F. Beltrán
Experimental and theoretical study of catalytic C-F bond activation by group six triangular clusters containing phosphines T.F. Beltrán*
1, M. Feliz
1, R. Llusar
1, J.A. Mata
2, V.S. Safont
1,
1Universitat Jaume
I, Castelló, Spain, 2Universitat Jaume I, Castelló, Spain
[B.1.1.12] A. Kotzev Passive microrheology by MS-DWS: study of soft materials viscoelasticity C. Tisserand*, M. Fleury, L. Brunel, P. Bru, G. Meunier, Formulaction, France
[B.1.1.13] K. Gotlib-Vainshtein
Thickness-dependent mechanical properties of liquid phase deposited titania on polydimethyl siloxane K. Gotlib-Vainshtein*, O. Girshevitz, C.N. Sukenik, Institute of nanotechnology and advanced materials, Bar-Ilan University, Israel
[B.1.1.14] J.F. Lima Inorganic UV-shielding materials obtained by sol-gel hybrid matrix J.F. Lima*, O.A. Serra, University of São Paulo, Brazil
[B.1.1.15] M.E. Olya
Study of MnO2 nano-particles formed in situ chemical oxidation of the azo dyes by potassium permanganate M.E. Olya*
1,2, H. Aleboyeh
2, A. Aleboyeh
2,
1Young researchers club, islamic
azad university, north tehran branch, Iran, 2
Group génis des procédé ENSCMu université de Haute-Alsace Mulhouse France, France
[B.1.1.16] M.E. Olya Comparison of the different nano-filters used for dye removal and water reuse in textile effluents M.E. Olya*, Institute for color science and technology, Tehran, Iran
Symposium B – Functional hybrid nanoparticles and nanotubes
Hybrid Materials 2011|Poster Programme
[B.1.2.1] I. Al-Essa Photovoltaic properties for carbon nanotube junction prepared by arc discharge technique in argon gas I. Al-Essa*, G. Hermiz, G. Mohammed, Univ.of Baghdad/college of science, Iraq
[B.1.2.2] F. Ciesielczyk
Surface functionalisationofMO∙SiO2 hybrid oxides with different organic compounds F. Ciesielczyk*, T. Jesionowski, Poznan University of Technology, Institute of Chemical Technology and Engineering, Poland
[B.1.2.3] F. Ciesielczyk
Preparation and physico-chemical examination of functionalised MO∙SiO2/organic dye hybrid pigments F. Ciesielczyk*, A. Przybylska, K. Siwinska-Stefanska, D. Ambozewicz, T. Jesionowski, Poznan University of Technology, Institute of Chemical Technology and Engineering, Poland
[B.1.2.4] K. Szwarc
Physico-chemical and morphological properties of SiO2/silane/POSS as bifunctional materials K. Szwarc*, F. Ciesielczyk, M. Nowacka, T. Jesionowski, A. Kolodziejczak-Radzimska, K. Siwinska-Stefanska, Poznan University of Technology,Poland
[B.1.2.5] T. Jesionowski Functional nanohybrids SiO2/POSS and SiO2/silane/POSS T. Jesionowski*
1, K. Szwarc
1, F. Ciesielczyk
1, B. Marciniec
2,
1Poznan University
of Technology, Poland, 2Adam Mickiewicz University, Poland
[B.1.2.6] L.I. Nasibulina
A novel approach to create strong CNF-cement hybrid material L.I. Nasibulina*
1, I.V. Anoshkin
1, A.G. Nasibulin
1, A. Semencha
2, O.V.
Tolochko2, E.I. Kauppinen
1,3,
1Aalto University, Finland,
2State Polytechnical
University, Russia, 3VTT Biotechnology, Finland
[B.1.2.7] M.C. Gutierrez
Urea assisted calcite and hydroxyapatite mineralization on scaffolds of MWCNT assembled with synthetic elastin F. Del Monte
1, M.C. Gutierrez*
1, J.C. Rodriguez-Cabello
2, A. Ribeiro
2, S.
Nardecchia1, M. Alonso
2,
1ICMM-CSIC, Spain,
2University of Valladolid, Spain
[B.1.2.8] L. Vracar
Nanoparticles of Pt hyghly dispersed on different supports as a catalyst for oxygen reduction L. Vracar*
1, N. Krstajic
1, L. Gajic-Krstajic
2, N. Elezovic
3,
1Faculty of Technology
and Metallurgy, Serbia, 2Institute of Technical Sciences, SASA, Serbia,
3Institute
for Multidiscipolinary Research, Serbia
[B.1.2.9] D. Vidick Functionalized carbon nanotubes and nanofibers as supports for iron-cobalt clusters D. Vidick*, S. Hermans, M. Devillers, Université catholique de Louvain, Belgium
[B.1.2.10] R. Bilewicz
SWCNTs with covalently bound mediators for biocatalytic reduction of dioxygen R. Bilewicz*
1, K. Stolarczyk
1, E. Nazaruk
1, K. Sadowska
2, J. Biernat
2, J.
Rogalski3,
1University of Warsaw, Poland,
2Gdansk University of Technology,
Poland, 3Maria Curie Sklodowska University, Poland
[B.1.2.11] J. Guillot
Deposition and characterization of Pt nanoclusters on carbon nanotubes for gas sensor applications J. Guillot*
1, J.J. Pireaux
2, F. Reniers
3, C. Ewels
4, E. Llobet
5, H.N.
Migeon1,
1CRP-Gabriel Lippmann, Luxembourg,
2PMR-LISE, Belgium,
3ULB,
Belgium, 4IMN, France,
5URV, Spain
[B.1.2.12] M. Adeli
Carbon nanotube/hyperbranched polymers hybrid nanomaterials; new anticancer drug delivery systems M. Adeli*
1, Z. Sobhani
2, R. Dinarvand
2, F. Atyabi
2, M.R. Jafari
3, Z.
Moshari3,
1Lorestan University, Khoramabad, Iran,
2Tehran University of
Medical Sciences, Iran, 3
Nanotechnology and Biotechnology Research Center, Mashhad University of Medical Sciences, Iran
[B.1.2.13] N. Taheri Qazvini Gelatin/montmorillonite bio-hybrid nanoparticles via complex coacervation N. Taheri Qazvini*
1,2, S. Zinatloo
1,
1College of Science, University of Tehran,
Iran, 2Biomaterials Research Center, University of Tehran, Iran
[B.1.2.14] B.E. Cojocaru
Synergism of activated carbon and undoped and N-doped Tio2 in the photocatalytic degradation of chemical warfare agents using uv and visible light B.E. Cojocaru*
1, V.I. Parvulescu
1, M. Alvaro
2, H. Garcia
2,
1University of
Bucharest, Romania, 2Universidad Politecnica de Valencia, Spain
[B.1.2.15] C. Gonzato
Magnetic nanoparticles coated with a molecularly imprinted polymer synthesized by RAFT polymerization C. Gonzato*, P. Pasetto, K. Haupt, University of Technology of Compiègne, France
[B.1.2.16] N. Murillo-Cremaes Drug impregnated magnetic nanospheres
Hybrid Materials 2011|Poster Programme
N. Murillo-Cremaes*1, J. Saurina
2, C. Domingo
1, A. Roig
1,
1Institut de Ciència
de Materials de Barcelona-CSIC, Spain, 2Universitat de Barcelona, Spain
[B.1.2.17] M.H. Delville
Gold nanoparticles decorated silica nano-helices: towards SERS applications. R. Tamoto
1, M.H. Delville*
2, R. Oda
1,
1CBMN/IECB/CNRS, France,
2ICMCB/CNRS, France
[B.1.2.18] J. Rodrigues
Single wall carbon nanohorns (SWNH)s incorporated with platinum-acetylide dendrimers J. Rodrigues*
1, S. Maiti
1, M. Jardim
1, K. Rissanen
2, M. Irie
3, M.
Yudasaka3,
1CQM-Centro de Química da Madeira, LQCMM/MMRG,
Universidade da Madeira, Portugal, 2
Nanoscience Center, University of Jyväskylä, Finland,
3National Institute of Advanced Industrial Science and
Technology -AIST/ Nanotube Research Center, Japan
[B.1.2.19] M. Kokabi The effect of multi-walled carbon nanotubes on the polymerization of acrylamide/methylene bis acrylamide system F. Arabpour, M. Kokabi*, A.R. Bahramian, Tarbiat Modares University, Iran
[B.1.2.20] M. Aviv Natural-synthetic malleable composite hydrogel hybrid of HA and FmocFF for tissue engineering M. Aviv*, L. Buzansky, S. Einav, Z. Nevo, E. Gazit, Tel-Aviv University, Israel
[B.1.2.21] M. Kozlik
Combination of phthalocyanines and zinc oxide for functional hybrid materials M. Kozlik*, S. Milz, C. Ronning, T. Fritz, Institute of Solid State Physics, University of Jena, Germany
[B.1.2.22] J. Pietrasik
Silica-polymethacrylate hybrid particles synthesized using high-pressure atom transfer radical polymerization J. Pietrasik*, C.M. Hui, W. Chaladaj, J. Jurczak, M. Bockstaller, K. Matyjszewski, Institute of Polymer and Dye Technology, Technical University of Lodz, Poland
[B.1.2.23] E.K. Apartsin Multifunctional hybrids of oligonucleotides with carbon nanotubes E.K. Apartsin*, D.S. Novopashina, A.G. Venyaminova, Institute of Chemical Biology and Fundamental Medicine, Russia
[B.1.2.24] S. Ray Nano-scale fabrication of zeolite based multifunctional hybrid material S. Ray*, M. Gizdavic-Nikolaidis, A. Easteal, R. Cooney, University of Auckland, New Zealand
[B.1.2.25] K. Szwarc
Functional hybrids - structural properties, colloidal and thermal stability K. Szwarc*, M. Nowacka, K. Siwinska-Stefanska, F. Ciesielczyk, D. Ambrozewicz, T. Jesionowski, Poznan University of Technology, Institute of Chemical Technology and Engineering,Poland
[B.1.2.26] T. Jesionowski Hybrid pigments obtained by adsorption of dyes onto titania-silica support A. Przybylska, T. Jesionowski*, Poznan University of Technology, Institute of Chemical Technology and Engineering, Poznan, Poland
[B.1.2.27] C. Zaharia
New biomaterials based on silk fibroin and carbon nanotubes for bone reconstruction C. Zaharia*, C.M. Damian, M.R. Tudora, H. Iovu, C. Cincu, Politehnica University of Bucharest, Romania
[B.1.2.28] R. Vukicevic Carbon nanoparticles, nanotubes, and fullerenes functionalized with poly(vinylidene fluoride) for preparation of composite materials R. Vukicevic*, S. Beuermann, Potsdam University, Germany
[B.1.2.29] E. Bourgeat-Lami
Synthesis of cerium oxide-stabilized nanocomposite latexes through polymerization in aqueous dispersed system N. Zgheib, F. D'Agosto, M. Lansalot, J.L. Putaux, E. Bourgeat-Lami*, Université de Lyon - Univ. Lyon 1, France
[B.1.2.30] E. Reimhult Ultrastable superparamagnetic nanoparticle design and assembly for imaging and triggered release E. Amstad
1, E. Reimhult*
1,2,
1ETH Zurich, Switzerland,
2BOKU Wien, Austria
[B.1.2.31] A.C.V. de Araújo
Synthesis and characterization of polyaniline-Fe3O4 nanocomposites A.C.V. de Araújo*
1,2, S. Alves Júnior
1, W.M. de Azevedo
1,
1Universidade
Federal de Pernambuco, Brazil, 2
Universidade Federal Rural de Pernambuco, Brazil
[B.1.2.32] S. Han CNTs reverse electric field enhancement of CIGS solar cells S. Han*, W. Lee, Hanyang University, South Korea
[B.1.2.33] R. Dinarvand Human serum albumin conjugated poly lactide-co-glycolide nanoparticles as anti-cancer delivery systems S. Manoochehri, F. Atyabi, R. Dinarvand*, Tehran University of Medical
Hybrid Materials 2011|Poster Programme
Sciences, Iran
[B.1.2.34] M. Titirici Hydrothermal carbon nanocomposite materials for Li ion battery anodes M. Titirici*, J. Popovic, M. Antonietti, Max-Planck Institute for Colloids and Interfaces, Germany
[B.1.2.35] X.G. Cui Preparation of polycarbonate /silica core/shell hybrid microsphere X.G. Cui*, Q. Shi, Beijing Institute of Petro-Chemical Technology, China
Symposium B – Functional nanostructures
[B.1.3.1] A. Kareiva
Comparison of two novel sol-gel synthesis routes for the preparation of nanostructured YSZ thin films A. Zalga
1, B. Abakeviciene
2, A. Beganskiene
1, S. Tamulevicius
2, A.
Kareiva*1,
1Vilnius University, Lithuania,
2Kaunas University of Technology,
Lithuania
[B.1.3.2] M.A. Neouze
Building and tailoring ionic nanoparticle networks M. Litschauer
1, M. Czakler
1, B. Basnar
1, M. Puchberger
1, H. Peterlik
2, M.A.
Neouze*1,
1Vienna University of Technology, Austria,
2University of Vienna,
Austria
[B.1.3.3] M.A. Neouze
Photoluminescence as complementary evidence for short-range order in ionic silica nanoparticle networks M. Czakler
1, M. Litschauer
1, K. Föttinger
1, H. Peterlik
2, M.A. Neouze*
1,
1Vienna
University of Technology, Austria, 2University of Vienna, Austria
[B.1.3.4] G. Vijaya Prakash Photonic nanohybrids for enhanced and tunable photoluminescence V.K. Dwivedi, K. Pradeesh, G. Vijaya Prakash*, Indian Institute of Technology, India
[B.1.3.5] B. Naima Interfacial effect in Fe/ InGaAs magnetism. B. Naima*, R. Stefane, B. Lescop, L. Jacques, B. M'hamed, L. Zakia, University od Mostaganem, Algeria
[B.1.3.6] G. Vijaya PRakash Switcheable excitons in inorganic-organic hybrid natural quantum wells and its strong-coupling microcavity G. Vijaya PRakash*, K. Pradeesh, Indian Institute of Technology Delhi, India
[B.1.3.7] J. Mrowiec-Bialon
Supported gold nanoparticles catalyzed glucose oxidation K. Odrozek
1, J.J. Malinowski
2, A. Zawadzka
2, K. Maresz
2, J. Mrowiec-
Bialon*1,2
, 1Silesian University of Technology, Poland,
2Institute of Chemical
Engineering. Polish Academy of Sciences, Poland
[B.1.3.8] N. Talebian Paper withdrawn
[B.1.3.9] A.G. Guglya
Ion induced deposition of V-N-He nanocrystalline micropore structures A.G. Guglya*
1, V.G. Kolobrodov
1, E.S. Melnikova
1, R.L. Vasilenko
1, Y.V.
Nikitenko2, Y.I. Khaydukov
2,
1NSC, Kharkov Institute of Physics & Technology,
Ukraine, 2Joint Institute for Nuclear Research, Dubna, Russia
[B.1.3.10] K. Siwinska-Stefanska
Nucleation effect on physico-chemical and adsorptive properties of TiO2-SiO2 oxide composites obtained by co-precipitation K. Siwinska-Stefanska*, T. Jesionowski, Poznan University of Technology, Institute of Chemical Technology and Engineering, Poland
[B.1.3.11] K. Siwinska-Stefanska
The TiO2-SiO2 oxide composites – methods of synthesis and their effect on physico-chemical properties K. Siwinska-Stefanska*, T. Jesionowski, Poznan University of Technology, Institute of Chemical Technology and Engineering, Poland
[B.1.3.12] N. Baccile
Yeast-derived glycolipids as new structure directing agents for nanomaterial synthesis N. Baccile*
1, F. Babonneau
1, B. Thomas
1, I. Van Boegaert
2, W.
Soetaert2,
1LCMCP-UPMC-CNRS-Collège de France, France,
2InBio - UGent,
Belgium
[B.1.3.13] S.P. Nehra Preparation and characterization of hydrogenated ZnSe/Co nanostructured bilayer DMS thin films S.P. Nehra*, M. Singh, University of Rajasthan, Jaipur, India
[B.1.3.14] M.H. Delville
Microfluidic synthesis of a new type of metal/semiconductor Janus nanoparticles via laser photochemical deposition L. Vauriot
1,2, M. Hamieh
2, V. Martin-Torres
1, J.P. Delville
2, M.H.
Delville*1,
1ICMCB/CNRS, France,
2CPMOH, France
[B.1.3.15] O. Ghaffari Nik Efficient fillers for mixed matrix membranes: controling density of grafted aminosilanes on FAU/EMT zeolite O. Ghaffari Nik*, S. Kaliaguine, Laval University, Canada
[B.1.3.16] L. Bujak Control of plasmon coupling in gold nanoparticle – light-harvesting complex assemblies
Hybrid Materials 2011|Poster Programme
L. Bujak*1, T.H.P. Brotosudarmo
2, N. Czechowski
1, R. Litvin
1, R.J. Cogdell
2, S.
Mackowski1,
1Institute of Physics, Nicolaus Copernicus University, Poland,
2Glasgow Biomedical Research Centre, University of Glasgow, UK,
3Institute
fuer Halbleiterphysik, Johannes Kepler Universitaet, Austria
[B.1.3.17] N. Fragnière Functionalization of perfluoralkylated HBC N. Fragnière*
1, T. Jenny, University of Fribourg, Switzerland
[B.1.3.18] M. Olejnik
Hybrid nanostructures composed of gold nanoparticles and photosynthetic complexes M. Olejnik*
1, A. Agarwal
2, T. Schulte
3, E. Hofmann
3, N.A Kotov
2, S.
Mackowski1,
1Institute of Physics, Nicolaus Copernicus University, Poland,
2University of Michigan, USA,
3Ruhr-University Bochum, Germany
[B.1.3.19] J.C. Wei
Physically capturing mechanism of natural clays for inhibiting bacterial growth J.C. Wei*
1, Y.T. Yen
1, J.J. Lin
1,2, H.L. Su
2,
1National Taiwan University, Taiwan,
2National Chung Hsing University, Taiwan
[B.1.3.20] F. Kovanda
Oriented films of layered double hydroxides with photoactive properties F. Kovanda*
1, M. Jiricková
1, J. Demel
2, K. Lang
2,
1Institute of Chemical
Technology, Czech Republic, 2
Institute of Inorganic Chemistry of the AS CR, Czech Republic
[B.1.3.21] F. Kovanda Intercalation of paracetamol into Mg-Al hydrotalcite F. Kovanda*, Z. Maryšková, Institute of Chemical Technology, Czech Republic
[B.1.3.22] L. Yu
Synthesis and characterization of cationic functionalized polystyrene particles L. Yu*, F. Wang, A. Salvati, I. Lynch, K. Dawson, University College Dublin, Ireland
[B.1.3.23] J. Mosinger
Bactericidal nanofibers photogenerating reactive oxygen species J. Mosinger*
1,2, K. Lang
2, P. Kubát
3,
1Charles University in Prague, Czech
Republic, 2
Institute of Inorganic Chemistry, ASCR, Czech Republic,
3J.Heyrovský Institute of Physical Chemistry, ASCR, Czech Republic
[B.1.3.24] S. Rupp
Functionalized nanoparticles for ferroelectric and piezoelectric devices S. Rupp*
1,2, C. Gellermann
1, M. Popall
1, G. Sextl
1,2,
1Fraunhofer-Institut für
Silicatforschung, Germany, 2
Universität Würzburg, Lehrstuhl für Chemische Technologie der Materialsynthese, Germany
[B.1.3.25] O. Neskovic Functionalisation of carbon nanotubes with metal clusters O. Neskovic*, J. Cveticanin, D. Trpkov, Z. Kacarevic Popovic, A. Krkljes, Vinca Institute of Nuclear Sciences, Serbia
[B.1.3.26] K.L. Gurunatha Plasmonic control of molecular fluorescence by the biomimetic mineralization of self-assembled templates. K.L. Gurunatha*, E. Dujardin, CEMES CNRS UPR 8011, France
[B.1.3.27] S. Elli
Cement-admixture: study of the hybrid system. L. Eusebio
1, S. Elli*
2, M. Goisis
3, G. Manganelli
4, P. Gronchi
1,
1P.za Leonardo
da Vinci, Italy, 2
Institute for Biochemical Research G. Ronzoni, Italy,
3ITALCEMENTI, Italy,
4CTG Italcementi Group, Italy
Symposium B – Other
[B.1.4.1] T.P. Ang
Structural and photocatalytic comparison between SiO2-melon nanocomposites and TiO2-melon nanocomposites T.P. Ang*, Y.M. Chan, Institute of Chemical and Engineering Sciences, Singapore
[B.1.4.2] S. Gharibe
Assessment of the effects of capping agent on morphology and size of ZnSe nanoparticles S. Gharibe*
1, S. Afshar
2,1, L. Vafayi
1,
1Islamic Azad University, Iran,
2Iran
University of Science and Technology, Iran
[B.1.4.3] M. Izydorzak
Carbon-entrapped magnetic (Fe3C, Co, Ni) nanocrystallites - synthesis and properties M. Izydorzak*
1, M. Leonowicz
1, A. Pomagailo
2, G. Dzhardimalieva
2,
1Warsaw
University of Technology, Poland, 2Institute of Chemical Physics RAS, Russia
[B.1.4.4] M.P. Santos dos
Poly(dimethylsiloxane) elastomeric networks modified with schiff base: preparation, characterization and metal adsorption studies. M.P. Santos dos*, Y. Gushikem, I.V.P. Yoshida, State University of Campinas, Brazil
[B.1.4.5] R. Dinarvand LHRH conjugated methotrexate-human serum albumin nanoparticles, a novel drug delivery system to breast cancer A. Taheri
1, R. Dinarvand*
1, F. Ahadi
1, F. Atyabi
1, M.H. Ghahremani
2, P.
Hybrid Materials 2011|Poster Programme
Mansuri3,
1Tehran University of Medical Sciences, Iran,
2Tehran University of
medical science, Iran, 3Ahwaz University of medical science, Iran
[B.1.4.6] E. Delahaye
Hybrid nanomaterials derived from layered zinc hydroxide and ionic liquids E. Delahaye*
1,3, G. Rogez
2, P. Rabu
2, L. Douce
2, J.S. Gutmann
3, A.
Taubert1,
1University of Potsdam, Germany,
2IPCMS, France,
3Max Planck
Institut für Polymerforschung, Germany
[B.1.4.7] P.L. Jacquemin
New hybrid materials obtained by insertion of anionic N-salicylidene anilinederivatives inside a polyampholytic matrix P.L. Jacquemin*, M. Devillers, Y. Garcia, F. Arseneault-Hubert, Université Catholique de Louvain (UCL), Belgium
[B.1.4.8] A. Ghaffar
Structural changes of metallic lithium in nanoporous vycor glass due to geometrical confinement A. Ghaffar*
1, W. Pichl
1, G. Krexner
1, I. Zizak
2,
1University of Vienna, Austria,
2Helmholtz-Zentrum Berlin für Materialien und Energie, Germany
Symposium B – Polymer-matrix nanocomposites
[B.1.5.1] M.R. Ribeiro
Hdpe/mesoporous silica nanocomposites by in-situ polymerisation: structural details and mechanical response A. Bento
1, J.P. Lourenço
2, A. Fernandes
3, E. Pérez
4, M.L. Cerrada
4, M.R.
Ribeiro*1,
1Química e Biológica Instituto Superior Técnico (IST DEQB) -
Universidade Técnica de Lisboa, Portugal, 2Centro de Investigação em Química
do Algarve (CIQA), Faculdade de Ciências e Tecnologia - Universidade do Algarve, Portugal,
3Instituto de Biotecnologia e Bioengenharia (IBB), Instituto
Superior Técnico (IST DEQB), Portugal, 4
Instituto de Ciencia y Tecnología de Polímeros (CSIC), Spain
[B.1.5.2] S.S. Ochigbo Thermal properties of natural rubber composites based on ultrasound treated titanium dioxide dispersion S.S. Ochigbo*, Federal University of Technology, Minna, Nigeria, Nigeria
[B.1.5.3] M.I. Tavares Relaxometry evaluation of PVAl/clay nanocomposites M.I. Tavares*, A. Cunha, E. Silva, L. Moreira, UFRJ, Brazil
[B.1.5.4] P.N.B. Reis
A study of the fatigue behaviour on kevlar composites with nanoclay filled epoxy matrix J.A.M. Ferreira
1, J.D.M. Costa
1, P.N.B. Reis*
2, M.O.W. Richardson
3,
1University
of Coimbra, Portugal, 2University Beira Interior, Portugal,
3GTG/CTA Ltd, UK
[B.1.5.5] P.N.B. Reis
Impact response of kevlar composites with nanoclay enhanced epoxy matrix P.N.B. Reis*
1, J.A.M. Ferreira
2, P. Santos
1, B.C.H. Richardson
3, M.O.W.
Richardson3,
1University of Beira Interior, Portugal,
2University of Coimbra,
Portugal, 3GTG/CTA Ltd, UK
[B.1.5.6] M.L. Cerrada
Biocidal iPP-TiO2 nanocomposites: rheological characterization and structural details C. Serrano
1, M.L. Cerrada*
1, M. Fernández-García
1, J. Ressia
2,3, E.M.
Vallés2,
1Institute of Polymer Science and Technology (CSIC), Spain,
2Planta
Piloto de Ingeniería Química. PLAPIQUI (UNS-CONICET), Argentina, 3Comisión
de Investigaciones Científicas de la Provincia de Buenos Aires (CIC), Argentina
[B.1.5.7] H.N. Nolte
Reinforcing composites by dispersing alumina nanoparticles in an epoxy matrix H.N. Nolte*
1, C.S. Schilde
1, C.A. Arlt
2, A.K. Kwade
1,
1Institute for Particle
Technology, TU Braunschweig, Germany, 2
German Aerospace Center (DLR), Institute of Composite Structures and Adaptive Systems, Germany
[B.1.5.8] M. Fernández-García
Anatase surface-modification as strategy for tailoring interfaces in biocidal polymer-TiO2 materials C. Serrano
1, M.L. Cerrada
1, M. Fernández-García*
1, A. Kubacka
2, M. Ferrer
2, M.
Fernández-García2,
1Instituto de Ciencia y Tecnología de Polímeros (CSIC),
Spain, 2Instituto de Catálisis y Petroleoquímica (CSIC), Spain
[B.1.5.9] J. Asghari Synthesis and characterization of CdS/polystyrene nano composite by using microwave irradiation J. Asghari*, M. Mazaheritehrani, Golestan University, Iran
[B.1.5.10] R.E. Anderson
compatibilizing effect of poly[styrene-co-(glycidyl methacrylate)] in single-walled carbon nanotube-polycarbonate composites R.E. Anderson*, K. Stoeffler, B. Ashrafi, B. Simard, National Research Council Canada, Canada
[B.1.5.11] R.L. Goswamee Paper withdrawn
Hybrid Materials 2011|Poster Programme
[B.1.5.12] A. Sharma Characterization of aligned SWNT/PC nanocomposite membranes A. Sharma*, Y.K. Vijay, University of Rajasthan, India
[B.1.5.13] S. Babanzadeh Novel siloxane-based polyimides and related nano hybrids S. Babanzadeh*
1, S. Mehdipour-Ataei
2, A.R. Mahjoub
1,
1Tarbiat Modares
University, Iran, 2Iran Polymer and Petrochemical Institute, Iran
[B.1.5.14] V. Loryuenyong
Preparation and characterization of TiO2 nanostructures and its application in photocatalytic degragation of PS-TiO2 nanocomposites V. Loryuenyong*
1,2,
1Silpakorn University, Thailand,
2National Center of
Excellence for Petroleum, Thailand
[B.1.5.15] R. Kanda
Dimensional analysis of conducting mechanism in conductive polypyrrole/montmorillonite nanocomposites R. Kanda*
1, Y. Tanaka
1, H. Enomoto
1, M. Lerner
2,
1Osaka Electro-
Communication University, Japan, 2Oregon State University, USA
[B.1.5.16] E.V. Karaksina
Preparation and optical properties of new infrared materials: As2S3 withСr2+ -
- doped ZnS anl ZnSe nanoparticles. E.V. Karaksina*
1, M.F. Churbanov
1, E.M. Dianov
2, R.A. Mironov
2, A.O.
Zabezhaylov2,
1Institue of High-Purity Substances of Russian Academy of
Science, Russia, 2
Fiber Optics Research Center of Russian Academy of Science, Russia
[B.1.5.17] M. Gürtekin
Development of phosphine oxide and bisfluorobiphenyl based poly(arylene ether) polymer electrolyte membranes (PEM)s by using sol-gel method for fuel cell applications M. Gürtekin*
1, T. Yilmaz Inan
1, N. Kayaman Apohan
2, A. Güngör
2,
1TUBITAK,
Marmara Research Center, Chemistry Institute, TURKEY, Turkey, 2
Marmara University, Turkey
[B.1.5.18] A. Tercjak Thermo- and photo-responsive nanostructured thermosetting systems based on block copolymers and TiO2 nanoparticles A. Tercjak*, J. Gutierrez, I. Mondragon, University of the Basque Country, Spain
[B.1.5.19] K.H.Y. Yoon Thermal behaviour of transparent film made of multi-walled carbon nanotubes K.H.Y. Yoon*, S.M.K. Kim, Kumoh National Institute of Technology, South Korea
[B.1.5.20] E. Espuche Paper Withdrawn
[B.1.5.21] N. Tahmassebi Cure characterization of nano silica filled acrylic melamine clearcoats using DMTA and FTIR N. Tahmassebi*, Islamic Azad University, Iran
[B.1.5.22] D. Trötschel
Photopatternable piezoelectric 0-3 composites for microsystems technology D. Trötschel*
1,2, R. Houbertz
1, M. Popall
1, G. Sextl
1,2,
1Universität Würzburg,
Germany, 2Fraunhofer-Institut für Silicatforschung, Germany
[B.1.5.23] S Beuermann Polymer-Ionic liquid composite materials containing magnetic nanoparticles M Belß, A Jelicic, S Beuermann*, University of Potsdam, Germany
[B.1.5.24] G. Baran Designing bioinspired composites Y. Lei, W. Wang, G. Baran*, K. Sadeghipour, S. Sieburth, Temple University, USA
[B.1.5.25] E. Reynaud Adiabatic heating in reinforced thermoplastics: role of crystallinity G. Dorairaju, S. Toshniwal, K. Tulsyan, D.F. Schmidt, E. Reynaud*, University of Massachusetts Lowell, USA
[B.1.5.26] J. Mead
Aligned carbon nanotube polymer nanocomposites using template-directed assembly J. Mead*, A. Ashter, J. Shen, A. Kumar, M. Wei, C. Barry, University of Massachusetts Lowell, USA,
2Northeastern University, USA
[B.1.5.27] H. Palza Polypropylene/SiO2 nanocomposites for barrier applications: effect of particle size and modification D. Bracho, V.N. Dougnac, H. Palza*, R. Quijada, Universidad de Chile, Chile
[B.1.5.28] M. Moghanizadeh
Ashkezari
Morphology and mechanical properties of electrospun polyvinyl alcohol / nano alumina nanocomposite as tubular scaffold M. Moghanizadeh Ashkezari*
1, M. Kokabi
1, M. Soleimani
2,
1Tarbiat Modares
University, Iran, 2Tarbiat Modares University, Iran
[B.1.5.29] A. Buasri
Preparation and characterization of poly(lactic acid) - modified TiO2 nanoparticle hybrid materials A. Buasri*
1,2, N. Chaiyut
1,2, C. Kritsanakun
1, C. Phatkun
1, T.
Khunsri1,
1Silpakorn University, Thailand,
2Chulalongkorn University, Thailand
[B.1.5.30] C. Loubat Functional polymers bearing reactive functionsphosphonic acid -
Hybrid Materials 2011|Poster Programme
alcoxysilane - oxirane - amino - maleimide C. Loubat*
1,
1SPECIFIC POLYMERS, France
[B.1.5.31] C. Swalus
Hybridization of polyoxotungstate with a zwitterionic polymer matrix: toward the control of their selectivity in liquid-phase epoxidation of olefins C. Swalus*, M. Devillers, E.M. Gaigneaux, Institute of Condensed Matter and Nanosciences, Belgium
[B.1.5.32] D. Duraczynska
Preparation, characterization and catalytic application of Ru catalysts supported on amine groups functionalized polymer D. Duraczynska*, E.M. Serwicka, A. Drelinkiewicz, E. Bielanska, R. Socha, L. Litynska-Dobrzynska, Institute of Catalysis and Surface Chemistry, Polish Academy of Sciences, Poland
[B.1.5.33] R. Comparelli
Nanocrystal based nanocomposites: functional materials for micro and nanofabrication C. Ingrosso
1,3, M. Tamborra
1,3, A. Panniello
1,2, R. Comparelli*
1, M.L. Curri
1, M.
Striccoli1,
1CNR IPCF Div. Bari, Italy,
2University of Bari, Italy,
3CNR-IMM Div.
Lecce, Italy
Symposium B – Selforganisation of nanoobjects
[B.1.6.1] M. Striccoli
Mono- and bi-modal PbS nanocrystal based superlattices: fabrication and structural investigation M. Corricelli
1,2, E. Fanizza
1,3, M. Striccoli*
2, D. Altamura
4, C. Giannini
4, A.
Falqui5,
1University of Bari, Italy,
2CNR-IPCF Div. Bari, Italy,
3Centro METEA,
University of Bari, Italy, 4CNR-IC Bari, Italy,
5IIT Genova, Italy
[B.1.6.2] V. Artel Controlling and assaying the oxidation state and functional group density of sulfur-functionalized self assembled monolayers (SAMs) V. Artel*, C.N. Sukenik, Bar-Ilan University, Israel
[B.1.6.3] A.S. Blum An engineered tobacco mosaic virus coat protein as a scaffold for generating free-standing nanostructures A.S. Blum*, K.V. Korpany, O.K. Zahr, McGill University, Canada
[B.1.6.4] J. Klanke Stable organic radicals at metallo(II)-phthalocyanines on surfaces J. Klanke*, K. Medjanik, G. Schönhense, E. Rentschler, University of Mainz, Germany
[B.1.6.5] C. Plenk High-spin cluster for click reactions C. Plenk*, E. Rentschler, University of Mainz, Germany
Symposium B – Sol-gel derived hybrids
[B.1.7.1] R. Backov
Ionic liquids supported on silica-based monolithic foams: synthesis, characterizations and catalytic properties N. Brun
1, A. Babeau-Garcia
1, H. Deleuze
2, M.F. Achard
1, R. Backov*
1,
1CRPP
UPR CNRS 8641, France, 2
Université Bordeaux I/CNRS, Institut des Sciences Moléculaires (ISM), France
[B.1.7.2] A. Kareiva Increased hydrophobicity of inorganic surfaces via chemical modification J. Pilipavicius, A. Zalga, A. Beganskiene, A. Kareiva*, Vilnius University, Lithuania
[B.1.7.3] U. Diaz
Organic-inorganic hybrid materials based in catalytic functional builders integrated into their porous structure A. Cantin, A. Corma, U. Diaz*, T. Garcia, A. Velty, Instituto de Tecnología Química (UPV-CSIC), Spain
[B.1.7.4] N. Talebian Paper withdrawn
[B.1.7.5] M. Traore
New elaboration method and laser micro-structuring of photochromic pHEMA-(oxo)TiO2 hybrid materials P. Gorbovyi
1,2, M. Traore*
1,2, O. Brinza
2, K. Chhor
1,2, L. Museur
1,3, A.
Kanaev2,
1Université de paris Nord (paris XIII), France,
2Laboratoire d’Ingénierie
des Matériaux et Hautes Pressions (LIMHP) – UPR 1311 CNRS, France,
3Laboratoire de Physique des Lasers (LPL) – UMR 7538 CNRS, France
[B.1.7.6] D. Düsselberg Synthesis and characterization of polyimide-titaniumdioxid nanocomposites and hybrid materials C. Staudt, D. Düsselberg*, University of Düsseldorf, Germany
[B.1.7.7] R. Deshmukh Synthesis of metal nitride@SiO2 nanocomposites from hybrid silica sol-gel precursors R. Deshmukh*, U. Schubert, Vienna University of Technology, Austria
[B.1.7.8] N. Dargère
Hydrolysis-condensation reactions of hydridosilazane: identification and quantification of the species by
1H and
29Si NMR
N. Dargère*1,2
, V. Bounor-Legaré1, F. Boisson
3, G. Martin
2, P. Sonntag
2, N.
Garois4,
1Université Claude Bernard Lyon1, Ingénierie des Matériaux
Hybrid Materials 2011|Poster Programme
Polymères, Laboratoire des Matériaux Polymères et des Biomatériaux UMR CNRS 5223, France,
2Hutchinson S.A., Centre de Recherche, France,
3Service
commun de RMN du Réseau des Polyméristes Lyonnais IMP UMR CNRS 5223, France,
4Hutchinson Polymers, France
[B.1.7.9] C. Maurer
Structured sol gel materials derived from pre-organized metal alkoxide precursors C. Maurer*, U. Schubert, Institute of Material Chemistry, Vienna University of Technology, Austria
[B.1.7.10] S. Gutzov
Preparation and optical properties of silica gels doped with a new Eu(III) complex S. Gutzov*, N. Petkova, S. Kaloyanova, N. Lesev, T. Deligeorgiev, S. Stoyanov, Sofia University, Bulgaria
[B.1.7.11] N. Talebian Paper withdrawn
[B.1.7.12] M. Messori
Non-aqueous sol-gel for the preparation of poly(methyl methacrylate)/titania hybrids F. Bondioli, M. Messori*, D. Morselli, University of Modena and Reggio Emilia, Italy
[B.1.7.13] T.Y. Chen
Formation of self-aggregated and interconnected silver network within sol-gel nanocomposites T.Y. Chen*
1,2, C.K. Chiu
1, Y.J. Choi
1, T.J.M. Luo
1, T.L. Lin
2,
1North Carolina
State University, USA, 2National Tsing Hua University, Taiwan
[B.1.7.14] O. Pascu
Magnetic decoration of photonic crystals via microwave-assisted nonaqueous sol-gel chemistry O. Pascu*
1, J.M. Caicedo
1, A. Roig
1, V. Canalejas
2, M. López-García
2, C.
López2,
1Institut de Ciència de Materials de Barcelona (ICMAB-CSIC), Spain,
2Instituto de Ciencia de Materiales de Madrid (ICMM–CSIC), Spain
[B.1.7.15] V. Bounor-Legare
In situ synthesis of titanium dioxide in a molten polypropylene matrix by hydrolysis-condensation reactions through reactive extrusion V. Bounor-Legare*, P. Cassagnau, W. Bahloul, F. Melis, IMP-UMR 5223-CNRS, France
[B.1.7.16] M. Pokrass Carbon nanotube fast sol-gel composites M. Pokrass*, R. Gvishi, Soreq NRC, Israel
[B.1.7.17] S.M. Hanetho Hybrid coatings based on aminosilane S.M. Hanetho*
1, C. Simon
2, I. Kaus
2, T. Grande
1, M.A. Einarsrud
1,
1NTNU,
Norway, 2SINTEF, Norway
[B.1.7.18] R.A. Procaccini
Development of silver clusters in hybrid silica based coatings through the sol-gel process R.A. Procaccini*
1, M. Aparicio
2, S. Ceré
1, S. Pellice
1,
1INTEMA UNMdP-
Consejo Nacional de Investigaciones Científicas y Técnicas Juan B Argentina,
2Instituto de Cerámica y Vidrio – CSIC Kelsen 5 (Campus de Cantoblanco) ,
Spain
Symposium C – COFs
[C.1.1.1] A.W. Cyganiuk
Inert gases separation by nanoporous carbon molecular sieves obtained from Salix viminalis A.W. Cyganiuk*, O. Gorska, A. Olejniczak, J.P. Lukaszewicz, Nicholas Copernicus University, Poland
Symposium C – Hierarchically structured materials
[C.1.2.1] A. Ahmed Porous silica spheres in macroporous structures and on nanofibres A. Ahmed*, R. Clowes, E. Willneff, P. Myers, H. Zhang, University of Liverpool, UK
[C.1.2.2] M.C. Gutierrez
Resorcinol-formaldehyde polycondensation in deep eutectic solvents for the preparation of hierarchical carbons and carbon-carbon nanotube composites F. Del Monte, M.L. Ferrer, M.C. Gutierrez*, D. Carriazo, ICMM-CSIC, Spain
[C.1.2.3] J. Mrowiec-Bialon
Novel monolithic microreactor for gluconic acid synthesis K. Odrozek
1, W. Pudlo
1, A.B. Jarzebski
1,2, J. Mrowiec-Bialon*
1,2,
1Silesian
University of Technology, Gliwice, Poland, 2
Institute of Chemical Engineering, Polish Academy of Sciences, Gliwice, Poland
[C.1.2.4] N.E. Vrana
Hierarchical pore structure within an hybrid Titanium/biodegradable polymer tracheal implant for controlling restenosis and epithelialization N.E. Vrana*
1, A. Dupret
2, D. Vautier
1, C. Debry
2, P. Lavalle
1,
1INSERM UMR
977 Univ. de Strasbourg, France, 2CHU Hautepierre, Strasbourg, France
Hybrid Materials 2011|Poster Programme
Symposium C – Macrocellular solids
[C.1.3.1] R. Backov
LiBH4 heterogeneous nucleation within hierarchically structured carbonaceous foams: application as host sites for hydrogen storage R. Backov*
1, N. Brun
1, R. Janot
2, C. Gervais
3, H. Deleuze
4, C.
Sanchez3,
1Centre de Recherche Paul Pascal, UPR CNRS 8641, France,
2Laboratoire de Réactivité et de Chimie des Solides, Amiens, France,
3Laboratoire de Chimie de la Matière Condensée UMR CNRS 7475,France,
4Université de Bordeaux, Institut des Sciences Moléculaires,France
[C.1.3.2] P. Sooksaen
Fabrication and characterization of ceramic foams produced on polymer templates using low-cost materials P. Sooksaen*, J. Chanintornthep, C. Chuenprasertwong, J. Burapakusolsri, Silpakorn University, Thailand
Symposium C – Mesoporous Materials
[C.1.4.1] R. Javad Kalbasi
Synthesis and characterization of poly (4-methyl vinylpyridinium hydroxide)/SBA-15 composite as a highly active heterogeneous basic catalyst: an organic-inorganic hybrid polymer R. Javad Kalbasi*, M. Kolahdoozan, A. Massah, K. Shahabian, Shahreza Branch, Iran
[C.1.4.2] G. Orsini Straightforward nonhydrolytic sol-gel route to mesoporous mixed-conducting tungsten oxide G. Orsini*, V. Tricoli, Universita' di Pisa, Italy
[C.1.4.3] R. Sabet Dariani Spray pyrolysis deposition of nanostructures zinc oxide films F. Zahedi, R. Sabet Dariani*, Alzahra University, Iran
[C.1.4.4] Q.J. He
Facile constructing of pH-responsive DDS drug@surfactant@MSNs against multidrug resistance of cancer Q.J. He*, J.L. Shi, Shanghai Institute of Ceramics, Chinese Academy of Sciences, China
[C.1.4.5] Y.F. Zhu Folate-conjugated Fe3O4@SiO2 hollow mesoporous spheres as potential carriers for targeted drug delivery Y.F. Zhu*, N. Hanagata, National Institute for Materials Science (NIMS), Japan
[C.1.4.6] K.V. Katok Silica based adsorbents for water treatment K.V. Katok*
1, R.L.D. Whitby
2, A.B. Cundy
2,
1O.O. Chuiko Institute of Surface
Chemistry of NAS of Ukraine, Ukraine, 2Brighton University, UK
[C.1.4.7] A.J. Kessman Design and synthesis of mesoporous films for sustained organic functionality A.J. Kessman*
1, D.R. Cairns
1,
1West Virginia University, USA
[C.1.4.8] N. Murillo-Cremaes
Clean and effective host-guest synthesis of photoactive molecules in nanoporous matrices using supercritical carbon dioxide N. Murillo-Cremaes*
1, A.M. López-Periago
1, J. Saurina
2, A. Roig
1, C.
Domingo1,
1Institut de Ciència de Materials de Barcelona-CSIC, Spain,
2Universitat de Barcelona, Spain
[C.1.4.9] J. Dedecek
Metallo-geopolymers - new type of mesoporous alumosilicate catalysts J. Dedecek*
1, P. Sazama
1, O. Bortnovsky
2, Z. Tvaruzkova
1, Z. Sobalik
1,
1J.
Heyrovsky Institute of Physical Chemistry, Academy of Sciences of the Czech Republic, Czech Republic,
2Research Institute of Inorganic Chemistry, Unipetrol
a.s., Czech Republic
[C.1.4.10] U. Diaz
Organic-inorganic mesoporous hybrid materials based on structural diamines for base catalysis E. Gianotti
1,2, U. Diaz*
1, S. Coluccia
2, A. Corma
1,
1Instituto de Tecnología
Química (UPV-CSIC) Universidad Politécnica de Valencia. Consejo Superior de Investigaciones Científica, Spain,
2NIS-Centre of Excellence, University of Turin,
Italy
[C.1.4.11] L.A. Rocha Pore size engineering: a natural oil as a new swelling agent J.N.M. Batista, L.S. Maia, T.S. Martins, L.A. Rocha*, Franca University, Brazil
[C.1.4.12] K. Wörmeyer
Tailor-made silica aerogels for CO2 adsorption K. Wörmeyer*
1, I. Smirnova
1, A. Erdle
2, P. Bendfeld
2, C. Mevenkamp
2, T.
Giese2,
1Hamburg University of Technology, Germany,
2Airbus Deutschland,
Germany
[C.1.4.13] L.S. Soeira
Synthesis, characterization and application of CeO2-based ordered mesoporous materials in catalytic heterogeneous ozonation process L.S. Soeira*
1, G.C. Ortiz
2, T.S. Martins
2, R.S. Freire
1,
1Universidade de São
Paulo, Brazil, 2Universidade Federal de São Paulo, Brazil
[C.1.4.14] A.M. El-Toni Paper withdrawn
Hybrid Materials 2011|Poster Programme
[C.1.4.15] N. Tit Paper withdrawn
[C.1.4.16] G. Morales Sulfonic acid hybrid materials based on ultra-large-pore SBA-15 R. Van Grieken, F. Martínez, A. Martín, G. Morales*, R. Sánchez-Vázquez, Universidad Rey Juan Carlos, Spain
[C.1.4.17] M.L. Pinto The separation of hydrocarbons on porous clays studied by chromatography M.L. Pinto*, J. Pires, University of Lisbon, Portugal
[C.1.4.18] B. Alonso
Functional mesoporous microspheres through spray-drying M. Fatnassi
1, C. Tourné-Péteilh
1, J.M. Devoisselle
1, I. Melnyk
2, Y. Zub
2, B.
Alonso*1,
1Institut Charles Gerhardt - UMR 5253 (CNRS/ENSCM/UM2/UM1),
France, 2O. O. Chuiko Institute of Surface Chemistry; NAS of Ukraine, Ukraine
[C.1.4.19] M. Onaka Tin ion-exchanged montmorillonite: its characterization and powerful solid Acid catalysis for cyanation reactions with cyanotrimethylsilane M. Onaka*, Y. Masui, J.C. Wang, The University of Tokyo, Japan
[C.1.4.20] A. Tarlani
Organized nanoporous alumina-supported calcium; production, characterization and catalytic activity A. Tarlani*, M.P. Zarabadi, Chemistry & Chemical Engineering Research Center of Iran, Iran
[C.1.4.21] V. Morales
Easy chirally functionalized mesoporous organosilicas prepared by a one-pot methodology R.A. Garcia, R. Van Grieken, V. Morales*, REY JUAN CARLOS University, Spain
[C.1.4.22] G. Morales
Zirconia-silica mixed mesostructured oxides as catalysts for biodiesel production J.A. Melero, L.F. Bautista, G. Morales*, J. Iglesias, R. Sánchez-Vázquez, Universidad Rey Juan Carlos, Spain
[C.1.4.23] I. Bezverkhyy
NiO-NiMoO4 : novel mesoporous nanocomposite for absorption of sulfur-containing molecules J. Skrzypski
1, I. Bezverkhyy*
1, O. Safonova
2, J.P. Bellat
1,
1Université de
Bourgogne, France, 2European Synchrotron Radiation Facility, France
[C.1.4.24] D. SEN Structure and targeting ability of functionalized porous silica particles D. Sen*, A. Duchanoy, J. Rosenholm, E.V. Hartman, M. Linden, P. Eklund, Åbo Akademi University, Finland
[C.1.4.25] A.M. Maubert
General sol-gel synthetic procedure for the preparation of multimetallic layered double hydroxides J. Prince
1, A.M. Maubert*
1, J.S. Valente
2,
1Universidad Autonoma
Metropolitana, Mexico, 2Instituto Mexicano del Petroleo, Mexico
Symposium C – MOFs
[C.1.5.1] A. Zukal
Adsorption of carbon dioxide on microporous materials: a comparison of metal-organic frameworks and zeolites A. Zukal*, J. Mayerová, J. Heyrovsky Institute of Physical Chemistry, Academy of Sciences of the Czech Republic, Czech Republic
[C.1.5.2] G.K. Mehrotra
Supramolecular synthons assisted molecular self-assembly of cadmium-triazolate complexes: synthesis, structures and photoluminescent properties G.K. Mehrotra*
1, K.A. Siddiqui
1, R.J. Butcher
2,
1M N National Institute of
Technology Allahabad, India, 2Howard University Washington, USA
[C.1.5.3] G.T. Palomino
IR spectroscopy and thermodynamics of hydrogen adsorption on Mg-MOF-74 and co-MOF-74 G.T. Palomino*
1, C.P. Cabello
1, S. Chavan
2, E. Garrone
3, C.O.
Areán1,
1University of the Balearic Islands, Spain,
2University of Torino, Italy,
3Politecnico di Torino, Italy
[C.1.5.4] P. Garczarek
3-amino-5-(dihydroxyphosphoryl)benzoic acid and 3-(dihydroxyphosphoryl)-5-nitrobenzoic acid – novel, rigid, multifunctional building blocks for metal phosphonate synthesis P. Garczarek*
1, J. Zon
1, J. Janczak
1,
1Wroclaw University of Technology,
Poland, 2Institute of Low Temperatures and Structure Research, Poland
[C.1.5.5] S. Loera-Serna
Electrochemical behavior of Cu2(BTC)3 metal organic framework synthesized from different routes M.A. Oliver-Tolentino
1, H.I. Beltrán-Conde
2, M.D.L. López-Nuñez
3, J. Flores-
Moreno3, A. Guzmán-Vargas
1, S. Loera-Serna*
3,
1ESIQIE-IPN, Mexico,
2UAM,
Unidad Cuajimalpa, Mexico, 3UAM, Unidad Azcapotzalco, Mexico
[C.1.5.6] E. Lagadic Novel aromatic building blocks for MOFs
Hybrid Materials 2011|Poster Programme
E. Lagadic*, Y. Garcia, J. Marchand-Brynaert, Université catholique de Louvain, Belgium
[C.1.5.7] D. Umeyama
Proton conductive hybrid of porous coordination polymer and nitrogen heterocycles D. Umeyama*
1, S. Horike
1, Y. Hijikata
1, S. Kitagawa
1,2,
1Kyoto University,
Japan, 2JST/ERATO, Japan,
3iCeMS Kyoto University, Japan
[C.1.5.8] S.S. Han
H2 adsorption mechanism in zeolitic imidazolate frameworks using Ab initio based grand canonical monte carlo simulation S.S. Han*
1, S.H. Choi
2, W.A. Goddard III
3,
1Korea Research Institute of
Standards and Science, South Korea, 2Insilicotech Company Ltd., South Korea,
3California Institute of Technology, USA
[C.1.5.9] I. Bremer
Preparation of alumina supported Zr-MOF layers using modulated syntheses I. Bremer*, A. Schaate, P. Behrens, Institut für Anorganische Chemie, Leibniz Universität Hannover, Germany
[C.1.5.10] F.X. Llabrés i Xamena
Cu-MOFs as heterogeneous catalysts for the liquid phase aerobic oxidation of alkanes F.X. Llabrés i Xamena*, I. Luz, A. Corma, Instituto de Tecnología Química (UPV-CSIC), Universidad Politécnica de Valencia, Consejo Superior de Investigaciones Científicas, Spain
Symposium C – Other
[C.1.6.1] E. Sadeghi Meresht
Compressive strength and microstructural properties of sand-polymer composite E. Sadeghi Meresht*, J. Aghazadeh Mohandesi, Tarbiat Modares University, Iran
[C.1.6.2] T. Witvrouwen
Hybrid titanium-silicate catalysts prepared in a cold plasma reactor at atmospheric pressure. T. Witvrouwen*
1,2, S. Paulussen
1, B.F. Sels
2,
1VITO (Flemish Institute for
Technological Research, Boeretang 200, B-2400 Mol, Belgium), Belgium, 2
KUL (Katholieke Universiteit Leuven, Dept M2S, Ctr Surface Chem & Catalysis, B-3001 Heverlee, Belgium), Belgium
[C.1.6.3] P. Youme Paper withdrawn
[C.1.6.4] P. Youme Paper withdrawn
[C.1.6.5] N. Tit Paper withdrawn
[C.1.6.6] T. Islam Identification of ceramic fluorapatite-binding short peptides from phage display and synthetic combinatorial libraries T. Islam*, M. Fernandez-Lahore, Jacobs University Bremen, Germany
[C.1.6.7] S. Sallard
soft and fast ionic liquid synthesis route of TiO2 (B) nanoparticles for functionalized materials C. Wessel
1, L. Zhao
2, B.M. Smarsly
1, L. Chen
2, Y.S. Hu
2, S. Sallard*
1,
1Justus-
Liebig-Universität Gießen, Germany, 2Beijing National Laboratory for Condensed
Matter Physics, China, 3Ruder Boskovic Institute, Croatia
[C.1.6.9] B. Naima Interfacial effect in fe/ ingaas magnetism B. Naima*, R. Stefane, B. Lescop, L. Jacques, ENSET d'Oran, Algeria
[C.1.6.10] J.M. Fernandez
Adsorption of non-polar herbicide s-metolachlor on layered double hydroxides intercalated by dodecylsulphate and tetradecanoate anions R. Otero, I. Pavlovic, M.A. Ulibarri, C. Barriga, J.M. Fernandez*, Universidad de Cordoba, Spain
Symposium C – Zeolites
[C.1.7.1] J. Pires Adsorption of vapours in ETS-4 and ETS-10 titanosilicates J. Pires*
1, M.L. Pinto
1, L. Corte-Real
1, J. Rocha
2,
1University of Lisbon,
Portugal, 2UniVersity of Aveiro, Portugal
[C.1.7.2] Y.J. Yoo Preparation of zeolite sheet and its application to gas separation Y.J. Yoo*, H.S. Kim, Korea Institute of Energy Research, South Korea
[C.1.7.3] C. Sa Couto
Mesoporosity generation in Nu-10 by desilication C. Sa Couto*, P. Matias, A. Fernandes, J. Madeira Lopes, M.F. Ribeiro, F. Ramôa Ribeiro, IBB, Instituto Superior Técnico, Universidade Técnica de Lisboa, Portugal
POSTER SESSION 2 Monday 7th March, 18:00 – 19:30
Hybrid Materials 2011|Poster Programme
Poster number Poster Presenter Title, Authors & Affiliations
Symposium A – Bioinspired
[A.2.1.1] D. Kapustin Nanohybrides and composites as perspective biomedical materials D. Kapustin*, E. Yagudaeva, Y. Bryk, V. Zubov, Institute of Bioorganic Chemistry, Russian Academy of Sciences, Russia
[A.2.1.2] C. Aime
Silica-collagen hybrid and composite materials as advanced dermal substitutes M.F. Desimone
1,2, C. Hélary
1, I. Rietveld
3, I. Bataille
4,5, G. Mosser
1, A. Pellé
4,5,
C. Aime*1,
1UPMC Univ Paris 06; CNRS, Chimie de la Matière Condensée de
Paris, France, 2
IQUIMEFA-CONICET, Universidad de Buenos Aires, Argentina,
3Université Paris Descartes, Chimie Physique, France,
4INSERM, U698, CHU
Xavier Bichat, Bât.. Inserm,France, 5
BPC, Institut Galilée, Université Paris 13, France
[A.2.1.3] M.T. Carvajal
Inspired by design: micro-fabrication of particles for inhalation drug delivery A. Otte
1, M. Rao
1,2, K. Park
1, M.T. Carvajal*
1,
1Purdue University, USA,
2University of California Riverside, USA
[A.2.1.4] D.W. Johnson Soil strength enhancements from plant root templated geotextiles K. Eisenacher, D.W. Johnson*, M. Sauceda, S. Bin-Shafique, M. Appleford, V. Sponsel, University of Texas at San Antonio, USA
Symposium A – Biomimetic materials
[A.2.2.1] Z. Csendes
Ni-S(uper)O(xide)D(ismutase) enzyme mimicking silica gel anchored Ni-amino acid complexes - synthesis, structure and catalytic activity Z. Csendes*, J.T. Kiss, P. Sipos, I. Palinko, University of Szeged, Szeged, Hungary
[A.2.2.2] G. Wißmann
Synthesis of calcium phosphate platelets for the fabrication of biocompatible nacre-like composites G. Wißmann*
1, B. Hering
1, S. Waraich
2, H. Menzel
2, P. Behrens
1,
1Institut für
Anorganische Chemie, Leibniz Universität Hannover, Germany, 2
Institut für Technische Chemie, Technische Universität Braunschweig, Germany
[A.2.2.3] S. Grandi
Effect of Au nanoparticles embedded in sol-gel 58S bioglass S. Grandi*
1, V. Cassinelli
2, M. Bini
2, P. Mustarelli
2,4, L. Visai
3,4, E.
Saino3,4
, 1I.E.N.I. C.N.R. Italy,
2University of Pavia, Italy,
3University of Pavia,
Italy, 4
Center for Tissue Engineering (CIT) University of Pavia, Italy, 5
Arvedi Laboratory CISRiC , University of Pavia, Italy
[A.2.2.4] M. Darder Phospholipid-sepiolite bio-hybrid materials as biomimetic hosts for enzyme immobilization B. Wicklein, M. Darder*, P. Aranda, E. Ruiz-Hitzky, CSIC, Spain
[A.2.2.5] R. Krishna Kumar Kinetic and morphological studies on enzymatically-assembled FMOC-tyrosine supramolecular structures. R. Krishna Kumar*, A.J. Patil, S. Mann, University of Bristol, UK
[A.2.2.6] D.S. Williams Aspects of the design & application of lipopeptide nanoparticles D.S. Williams*
1, A.W. Perriman
1, A.J. Jackson
2, J.A. Robinson
3, S.
Mann1,
1University of Bristol, UK,
2NIST, USA,
3University of Zurich, Switzerland
Symposium A – Biomineralisation
[A.2.3.1] N.H. Munro
In vitro in situ biomineralisation? Combining self-assembly of oligomers with calcium carbonate crystallisation N.H. Munro*
1, D.W. Green
2, K.M. McGrath
1,
1Victoria University of Wellington,
New Zealand, 2The Queensland Eye Institute, Australia
[A.2.3.2] E.B.L. Boix
Novel silk-germania binding peptide chimeras for germania (bio)mineralisation E.B.L. Boix*
1, O.D. Deschaume
1, C.C.P. Perry
1, H.A.C. Currie
2, D.L.K.
Kaplan2,
1Nottingham Trent University, UK,
2Tufts University, USA
[A.2.3.3] H.S. Yun
A mesoporous bioactive glass/polycaprolactone composite scaffold with biomimetic surface H.S. Yun*
1, S.H. Yun
1,2, S.H. Kim
2, I.H. Song
1,
1Korea Institute of Materials
Science, South Korea, 2Kyungpook National University, South Korea
[A.2.3.4] H.S. Yun
Development of three-dimensional bioceramic scaffold using an injectable bone cement for tissue engineering H.S. Yun*
1, S.H. Yun
1,2, S.H. Kim
2, I.H. Song
1,
1Korea Institute of Materials
Science, South Korea, 2Kyungpook National University, South Korea
Hybrid Materials 2011|Poster Programme
Symposium A – Biosystems (sensors, catalysts, vectors, imaging)
[A.2.4.1] J. Chen Paper withdrawn
[A.2.4.2] P.A. Garrain
Biocompatibility at the atomic scale: adsorption of peptides on stainless steel modelled by a combined DFT and classical approach P.A. Garrain*
1, M. Baaden
2, P. Marcus
1, D. Costa
1,
1Laboratoire de Physico-
Chimie des Surfaces UMR 7045Chimie-Paristech, France, 2
Laboratoire de Biochimie Théorique CNRS - UPR9080, France
[A.2.4.3] H. Ikemoto Catalytic kinetics and stability of horseradish peroxidase confined in nanoporous SBA-15 H. Ikemoto*, Q. Chi, J. Ulstrup, Technical University of Denmark, Denmark
[A.2.4.4] S. Begin Dendronized iron oxide nanoparticles as contrast agents for MRI S. Begin*
1, B. Basly
1, D. Felder
1, C. Billotey
2, P. Perriat
3, G. Pourroy
1,
1IPCMS,
France, 2Université Claude Bernard Lyon 1, France,
3INSA Lyon, France
[A.2.4.5] R. Chaudhari Fluorescent nano-in-micro hybrid particles for H2O2 detection R. Chaudhari*, A. Joshi, R. Srivastava, IIT Bombay, India
[A.2.4.6] W.J.R. Santos
Electrochemical sensor for chlorogenic acid using artificial receptor synthesized on the electrode surface by imprinting sol-gel process W.J.R. Santos*, M. Santhiago, I.V.P. Yoshida, L.T. Kubota, Instituto de Química, Universidade Estadual de Campinas, Brazil
[A.2.4.7] S. Frasca
Gold nanoparticles with defined size as support for the direct electron transfer and catalysis of the human sulfite oxidase S. Frasca*, O. Rojas, K. Stiba, S. Leimkühler, J. Koetz, U. Wollenberger, Universität Potsdam, Germany
[A.2.4.8] I. Chourpa
Magneto-optical nanoparticles for delivery and detection of anticancer drugs I. Chourpa*
1, K. Kaaki
1, J. Gautier
1, E. Allard
1, A. Paillard
1, E.
Munnier1,
1Université de Tours, France,
2Université d'Orléans, France,
3CNRS,
France
[A.2.4.9] A.C. Baptista Polymeric electrospun membranes for bioelectrochemical devices A.C. Baptista*, CENIMAT/I3N, Universidade Nova de Lisboa, Portugal
[A.2.4.10] J. Boudon
Development of smart MRI contrast agents for the molecular imaging of vulnerable atherosclerosis plaques J. Boudon*
1, S. Mornet
1, M.J. Jacobin-Valat
2, G. Clofent-Sanchez
2, C.E.
Hagemeyer3, E. Duguet
1,
1ICMCB-CNRS, UPR 9048, Université de Bordeaux
1, France, 2
RMSB-CNRS, UMR 5536, Université de Bordeaux 2, France,
3Atherothrombosis and Vascular Laboratory, Baker IDI Heart and Diabetes
Institute, Australia
[A.2.4.11] S. Sarda
Hydroxyapatite as a smart solid support for green heterogeneous catalysis S. Sarda*
1, C. Rey
1, E. Deydier
2, C. Audin
2, E. Manoury
2, R. Poli
2,3,
1Université
de Toulouse, CIRIMAT, Equipe "Phosphates, Pharmacotechnie et Biomateriaux", France,
2CNRS, Laboratoire de Chimie de Coordination,
Université de Toulouse, UPS-INP, France, 3
Institut Universitaire de France, France
Symposium A – Green Materials
[A.2.5.1] K. Srikulkit Preparation of poly(lactic acid)/hydrophobic chitosan blends P. Noknoi, K. Siralertmukul, K. Srikulkit*, Chulalongkorn University, Thailand
[A.2.5.2] L. Billon
Hybrid natural wood fibers / polymers: tuning the water repellancy and the fungicidal activity via surface-initiated madix/raft polymerization. D. Tastet, L. Billon*, M. Save, B. Charrier, F. Charrier, Université de Pau et des Pays de l'Adour, France
[A.2.5.3] R. Situmeang Fe1-x Nix O4 Catalysts: The effect of gas feeding on converting CO2/H2 R. Situmeang*, R. Supryanto, S. Wibowo, F. Julianti, S. Aliana, University of Lampung, Indonesia
[A.2.5.4] A. Pereira Duarte
Bacterial cellulose membranes modified by europium silylated complexes A. Pereira Duarte*
1,2, M. Gressier
1, J.M. A. Caiut
2, J. Dexpert-Ghys
3, M.J.
Menu1, S.J. L. Ribeiro
2,
1CIRIMAT- Université Paul Sabatier-Toulouse, France,
2UNESP, IQ Araraquara, Brazil,
3CEMES CNRS-Toulouse, France
[A.2.5.5] P. Ketwong Paper withdrawn
[A.2.5.6] E. Danloy Conception of photosynthetically active living hybrid materials by encapsulation of cyanobacteria within porous silicate matrices E. Danloy*, A. Léonard, B.L. Su, The University of Namur, Belgium
[A.2.5.7] E. Faure Paper withdrawn
Hybrid Materials 2011|Poster Programme
Symposium A – Other
[A.2.6.1] J. Panichpakdee
Use of 2-hydroxypropyl-beta-cyclodextrin as adjuvant for enhancing encapsulation and release characteristics of asiaticoside within and from cellulose acetate films J. Panichpakdee*, P. Supaphol, The Petroleum and Petrochemical College, Thailand
[A.2.6.2] A. Christel
Nanoparticles for multiple functionalization of scaffolds for stem cell engineering A. Christel*
1, S. Williams
1, A. Hoffmann
2, C. Kasper
3, P. Behrens
1,
1Leibniz
Universität Hannover, Institut für Anorganische Chemie,Germany, 2Medizinische
Hochschule Hannover, Klinik für Unfallchirurgie, Germany, 3
Leibniz Universität Hannover, Institut für Technische Chemie, Germany
[A.2.6.3] P. Behrens
Biofunctionalization of nanoporous silica N. Ehlert
1, A. Hoffmann
2, M. Badar
3, I. Hlozanek
2, P. Behrens*
1,
1Leibniz
Universität Hannover, Germany, 2
Medizinische Hochschule Hannover, Germany,
3Helmholtz-Zentrum für Infektionsforschung, Germany
[A.2.6.4] A. Zargar Kharazi
Mechanical evaluation of a partially resorbable composite bone plate under multi-axial loading A. Zargar Kharazi*
1, M.H. Fathi
1, F. Bahmani
2, H. Fanian
2,
1Biomaterials Group,
Isfahan University of Technology, Iran, 2
Isfahan University of Medical Sciences, Iran
[A.2.6.5] J. Jeromenok Microporous polyester networks from natural resources J. Jeromenok*, M. Antonietti, J. Weber, Max Planck Institute of Colloids and Interfaces Research Campus Golm, Germany
[A.2.6.6] A. Lungu
Synthesis and characterization of improved dental materials using D-sorbitol organogelators N.M. Florea, A. Lungu*, R.L. Stan, H. Iovu, University POLITEHNICA of Bucharest, Romania
[A.2.6.7] G. Leroux
Development of living hybrid materials by biological cells encapsulation into the porous media for the cell therapy G. Leroux*, P. Dandoy, C.F. Meunier, C. Michiels, B.L. Su, The University of Namur, Belgium
[A.2.6.8] P.O. Stanescu
Kinetic study on the thermal degradation of UDMA-BisGMA copolymers used in dentistry P.O. Stanescu*, A. Lungu, N.M. Florea, H. Iovu, Politehnica University of Bucharest, Romania
[A.2.6.9] R.G. Sousa New synthesis route and characterization of the poly(D,L-lactide-co-glicolide) copolymer C.D.C. Erbetta, R.F.S. Freitas, R.G. Sousa* Campus UFMG, Brazil
Symposium A – Synthetic/biopolymer conjugates
[A.2.7.1] C. Cepraga
Well-designed polymer/gold nanoparticle assemblies:from in vitro diagnostics to bio-imaging applications C. Cepraga*
1, A. Favier
1,5, G. Gody
1,2, R. Narain
4, S. Parola
1, M.T.
Charreyre1,5
, 1ENS, France,
2UCBL, France,
3CNRS, France,
4University of
Alberta, Canada, 5INSA, France
[A.2.7.2] R.R. Ali Synthesis of chitosan-based adsorbent for different dyes and various metal ions from their aqueous solutions. R.R. Ali*, Cairo University, Egypt
[A.2.7.3] P. Chuysinuan
Preparation, characterization, and antibacterial properties of electrospun polyacrylonitrile fiber mats containing extracts from garcinia mangostana P. Chuysinuan*, P.O. Rujitanaroj, P. Supaphol, The Petroleum and Petrochemical College and The Center for Petroleum, Petrochemicals and Advanced Materials,Chulalongkorn University, Thailand
[A.2.7.4] A. Nouri
Novel poly(ethylenimine) (PEI)-g-dimethylaminoethyl methacrylate (DMAEMA) vectors for gene delivery – synthesis, characterization and in vitro transfection A. Nouri*, Y. Li, J.L. Santos, C.T. Vieira, J. Rodrigues, H. Tomás, Universidade da Madeira, Portugal
[A.2.7.5] A.W. Perriman Ionic liquid proteins A.W. Perriman*, A.P.S. Brogan, S. Mann, University of Bristol, UK
[A.2.7.6] H. Farzad Modification of ketac-cem radiopaque glass ionomer by biopolymer chitosan H. Farzad*
1, E. Yilmaz
1, M. Gazi
1, M. Bengisu
2,
1Eastern Mediterranean
Hybrid Materials 2011|Poster Programme
University, Turkey, 2Izmir University of Economics, Turkey
Symposium B – Applications
[B.2.1.1] W. Benhadjala
Dielectric properties of core-shell hyperbranched polyester/barium titanate nanocomposites for embedded capacitor applications W. Benhadjala*
1, I. Bord-Majek
1, M. Buet
2, F. Rougé
2, Y. Ousten
1,
1Bordeaux
University, IMS Laboratory - UMR CNRS 5218, France, 2Polyrise SAS, France
[B.2.1.2] I. Gnatiuk Development of the sol-gel inkjet inks for printing on glass substrates I. Gnatiuk*, D. Holzinger, T. Schmidt, TIGER Coatings GmbH & Co. KG, Austria
[B.2.1.3] G. De Filpo A new nanostructured self-supplied photo-electrochromic device G. De Filpo*
1, F.P. Nicoletta
2, S. Siprova
1, G. Chidichimo
1,
1University of
Calabria Italy, 2University of Calabria,Italy
[B.2.1.4] M. Kanerva NCA test for interface study of hybrid laminate composites M. Kanerva*
1, L. Xuwen
2, E. Sarlin
3, O. Saarela
1,
1Aalto University School of
Science and Technology, Finland, 2Tampere University of Technology, Finland
[B.2.1.5] H. Tamai
Preparation of submicron size spherical porous carbons from phenol resin and their applications for electric storage devices H. Tamai*
1, M. Kobayashi
1, T. Shiono
1, H. Kai
2,
1Hiroshima University, Japan,
2MAZDA Mortor Corp., Japan
[B.2.1.6] F. Unob Functionalized polymer coated magnetic nanoparticles as selective adsorbent for Hg(II) removal K. Jainae, N. Sukpirom, F. Unob*, Chulalongkorn University, Thailand
[B.2.1.7] H.Y. Liu
Novel mesoporous silica drug delivery system and their biological applications H.Y. Liu*, D. Chen, L.L. Li, X.L. Huang, T.L. Liu, F.Q. Tang, Technical Institute of Physics and Chemistry, China
[B.2.1.8] J. Ren
Acid-resistant carbon-iron oxide microspheres with hollow or core/shell structures: synthesis, and application in eletrophoretic image displays J. Ren*, X.W. Meng, T. Wen, F.Q. Tang, Technical Institute of Physics and Chemistry, China
[B.2.1.9] L. Vellutini
A new acoustic waveguide based on biphenylene-bridged silsesquioxanes P. Massé
1, L. Vellutini*
1, B. Bennetau
1, J.P. Pillot
1, D. Rebière
2, P.
Weisbecker3,
1Institut des Sciences Moléculaires, UMR 5255-CNRS Université
de Bordeaux, France, 2
Laboratoire de l’Intégration du Matériau au Système, ENSEIRB, UMR 5218-CNRS, Université de Bordeaux, France,
3Laboratoire des
Composites Thermostructuraux UMR 5801- CNRS Université de Bordeaux, France
[B.2.1.10] M. Anis-ur-Rehman
Relative study of the dielectric and magnetic properties of nano particles of Cr and Cr-Zn doped strontium hexa ferrite G. Asghar, S. Nasir, M. Anis-ur-Rehman*, Applied Thermal Physics Laboratory, COMSATS Institute of Information Technology, Pakistan
[B.2.1.11] D. Villemin Paper withdrawn
[B.2.1.12] D. Villemin Paper withdrawn
[B.2.1.13] J. Le Bideau
LISSIL: smart integration of ionic liquid in current lithium battery technology for all-solid device endowed with liquid properties. J. Le Bideau*
1, D. Guyomard
1, J.B. Ducros
1, J.M. Zanotti
2, D. Petit
3, J.P.
Korb3,
1Institut des Matériaux Jean Rouxel (IMN), France,
2Laboratoire Léon
Brillouin, CEA-CNRS, France, 3
Physique de la Matière Condensée, Ecole Polytechnique, France
[B.2.1.14] K.H. Kim
Synthesis and tribological behaviour of Mo-Cu-N nanocomposite coatings by a magnetron sputtering technique J.H. Shin
1, Q.M. Wang
2, S.H. Kwon
2, K.H. Kim*
1,2,
1Pusan National University,
South Korea, 2
National Core Research Center for Hybrid Materials Solution, Pusan National University, South Korea
[B.2.1.15] B. Khodadadi
Additives effects of PVP, CMC, and HPC on the photocatalitic activity of Co-doped TiO2 nanocomposite B. Khodadadi*
1, M. Sabeti
2, S. Moradi Dehaghi
3, P. Aberomand Azar
4, M.E.
Olya5, S. Raeis Farshid
6,
1University of Qom, Iran,
2University of Qom, Iran,
3Tehran North Branch of Islamic Azad University, Iran,
4Science and Research
Branch of Islamic Azad University, Tehran, Iran, 5
Institute for Colour Science and Technology, Iran,
6Islamic Azad University of Lahijan, Iran
[B.2.1.16] L. Brigo New materials for micro- and nano-fabrication: hybrid sol-gel films as directly writable resists made highly inorganic at low temperature G. Brusatin
1, G. Della Giustina
1, G. Grenci
2, A. Pozzato
2, M. Tormen
2, L.
Hybrid Materials 2011|Poster Programme
Brigo*1,
1Padova University, Italy,
2IOM CNR, Laboratorio TASC Area Science
Park – Basovizza, Italy
Symposium B – Functional hybrid nanoparticles and nanotubes
[B.2.2.1] L. Tamasauskaite-
Tamasiunaite
Nano-Au(Ni)/TiO2/Ti electrocatalysts for borohydride oxidation prepared by galvanic replacement of electroless nickel layer L. Tamasauskaite-Tamasiunaite*
1, A. Balciunaite
1,2, A. Selskis
1,
1State
Research Institute, Center for Physical Sciences and Technology, Lithuania,
2Vilnius university, Lithuania,
3State Research Institute, Center for Physical
Sciences and Technology, Lithuania
[B.2.2.2] L. Billon
Hybrid core@soft shell particles as adhesive elementary building blocks for colloidal crystals C. Deleuze
1, M.H. Delville
2, V. Pellerin
1, C. Derail
1, L. Billon*
1,
1IPREM EPCP
UMR 5254, France, 2
ICMCB UPR 9048, France
[B.2.2.3] S. Grandi
Synthesis, characterization and cytotoxicity of inorganic and organic/inorganic nanoparticles containing boron for BNCT therapy S. Grandi*
1, C. Tomasi
1, S.A. Jadhav
2, E. Quartarone
2, P. Mustarelli
2, L.
Visai2,
1I.E.N.I. C.N.R., Italy,
2University of Pavia, Italy
[B.2.2.4] F. Giulieri Synthetic indigo-sepiolite maya blue F. Giulieri*, S. Ovarlez, A.M. Chaze, Université de Nice Sophia Antipolis, France
[B.2.2.5] J.L. Duvail
Polymer chain and SWNT alignment in composite nanotubes for improved (photo)conductance and mechanical reinforcement F. Massuyeau, Y.C. Zhao, E. Faulques, J. Wéry, C. Ewels, J.L. Duvail*, Institut des Matériaux (IMN) Nantes, France
[B.2.2.6] C.V. Santilli
Corrosion resistant organic-inorganic hybrids coatings reinforced by functionalized carbon nanotubes P. Hammer, F.C. Santos, S.H. Pulcinelli, C.V. Santilli*, Instituto de Química UNESP, Brazil
[B.2.2.7] F.M. Toma
Functionalization of carbon nanostructures for efficient water oxidation F.M. Toma*
1, A. Sartorel
2, M. Carraro
2, G. Scoles
3, M. Bonchio
2, M.
Prato1,
1University of Trieste, Italy,
2University of Padova, Italy,
3SISSA-ISAS,
Italy
[B.2.2.8] A. Bagramyan CdSe nano rod dispersed nematic liquid crystals A. Bagramyan*
1, T. Galstian
1, N. Zhao
2, E. Kumacheva
2,
1Laval University,
Canada, 2University of Toronto, Canada
[B.2.2.9] L. Van Lokeren Probing, in suspension, the ligands on the surface on gold nanoparticles by dosy NMR F. Ribot, H. Ben Sassi, L. Van Lokeren*, UPMC, France
[B.2.2.10] J.Y. Wu Synthesis of DNA-hybridized silica nanoparticle network for ATP detection J.Y. Wu*
1,2, T. Coradin
1, C. Aimé
1,
1UMR 7574-Université Pierre et Marie Curie,
France, 2Wuhan Institute of Technology, China
[B.2.2.11] M. Hamer Optical sensing of hydrogen peroxide reduction with nanoparticles modified with metalloporphyrins M. Hamer*, R. Carballo, I. Rezzano, University of Buenos Aires, Argentina
[B.2.2.12] K. Fujii Paper withdrawn
[B.2.2.13] S. Begin-Colin
Synthesis of iron oxide and cobalt ferrite nanoparticles with sizes higher than 20 nm and of core-shell Fe3-xO4@CoO nanoparticles W. Baaziz
1,2, S. Fleutot
1, C. Lefevre
1, B. Pichon
1, T. Mhiri
2, S. Begin-
Colin*1,
1IPCMS, France,
2Université de Sfax, Tunisia
[B.2.2.14] B. Schönstedt
Formulation and processing of a nano-particle dispersion for a scratch resistant sol-gel coating B. Schönstedt*
1, C. Günther
2, F. Weinelt
2, A. Kwade
1,
1Institut für
Partikeltechnik, TU Braunschweig, Germany, 2Evonik Industries, Marl, Germany