PRODUCT CATALOGUE February 2009

Posonic Security Systems International Ltd Unit 1110, 11/F, Yuen Long Trading Centre,

33 Wang Yip Street West, Yuen Long, Hong Kong.

Tel: (852) 24248386 Fax: (852) 24010483

email: sales@posonic.com web: www.posonic.com

All rights reserved

9000 Series Security Systems

9000 series systems provide the highest level of protection for sumptuous houses, banks, government buildings, and any place where very high security is needed. These systems are designed to be user-friendly and the modular concept of these systems provide installers with labour-saving features that make expanding, installing and servicing these systems quick and convenient.

Expand your system by adding zone expansion modules anywhere and in any combination on the BUS. Modules can be connected to the BUS at the most convenient location. Once installed, all modules can be programmed remotely via a keypad or the remote upload/download programming software.

9000 series is designed together with advanced functions keypad. With one button pressed on keypad, it can be programmed to contact the appropriate personnel in event of an emergency. Additional five pre-programmed keys let you to perform the most common functions with one touch.

Windows based remote programming software is available.

8000 Series Security Systems

8000 series systems are microprocessor-based control panels with a wide range of features for various applications while keeping low cost.

Windows based remote programming software is available.

EX Series Security Systems

EX series systems are microprocessor-based control panels with double zone technology. Both LED and LCD keypads offer the perfect combination of style and simplicity. LCD keypad has built-in multi-languages. With the wide variety to choose from, EX series panel has a keypad to fit any decor.

Remote programming software is available.

LCD Keypad

Metal Case and Transformer Optional

PS-9004 4-8 Zones Panel

Features

4 basic programmable zones, expandable to 8 programmable zones by double zone technology

Compatible with 9000 series LED/LCD keypad Maximum 8 keypads 3 emergency buttons on keypad Regular Arming, Stay Arming, Double Stay Arming, Forced Arming, One Key Regular Arming,

One Key Stay Arming, One Key Exit Arming, Auto Arming, Key-switch Arming 4 Programmable Outputs(driven by 47 events, including arm, disarm, trouble, tamper, bypass, code entry,

AC failure, etc) Forced Arming Auto Arming/Auto Delay 8 User Codes + 1 Master User Code + 1 Installer Code + 1

Duress Code 185 Event Buffer including date, time, event and partition

number One expandable module Power Supply: 16.5VAC 50VA AUX Power Output1A Alarm Current2.5A Dimension: 200x110mm Net Weight: 0.254 kg Metal Case and Transformer Optional

Communication 3 telephone number for CMSindependent reporting event for each telephone number Compatible with major communication formatsincluding 4+2, SIA, Ademco Contact IDetc. In addition,

the communication format can be defined yourselves to suit any digital receiver. Auto testing reportcommunication failure report Entry/exit programming mode report Remote programming software(local or remote)

Zone Expansion

Expandable to 8 zones using double zone connection method Expansion module can be located 700m away from panel

LED Keypad

9000 Series

LED Keypad

LCD Keypad

9000 Series PS-9006 6-12 Zones Panel

Features 6 basic programmable zones, expandable to 12

programmable zones by double zone technology Compatible with 9000 series LED/LCD keypad Maximum 16 keypads, 8 keypads can be connected for each

partition 3 emergency buttons on keypad Regular Arming, Stay Arming, Double Stay Arming, Forced

Arming, One Key Regular Arming, One Key Stay Arming, One Key Exit Arming, Auto Arming, Key-switch Arming

4 Programmable Outputs(driven by 47 events, including arm, disarm, trouble, tamper, bypass, code entry, AC failure, etc)

Forced Arming Auto Arming/Auto Delay 40 User Codes + 1 Master User Code + 1 Installer Code + 1 Duress Code Telephone Line Supervision 185 Event Buffer including date, time, event and partition number Max 32 expandable modules Power Supply: 16.5VAC 50VA AUX Power Output1A Alarm Current2.5A Net Weight: 0.4 kg Metal Case and Transformer Optional

Partition 2 partitions with independent account number Different user code assigned to each partition Independent system parameters and exit/entry delay timer for each partition

Communication 3 telephone number for CMS, independent reporting event for each telephone number Compatible with major communication formatsincluding 4+2, SIA, Ademco Contact IDetc. In addition,

the communication format can be defined yourselves to suit any digital receiver. Auto testing reportcommunication failure report Entry/exit programming mode report

Zone Expansion

Expandable to 12 zones using double zone connection method Expansion module can be located 700m away from panel

LED Keypad

LCD Keypad

9000 Series PS-9048 Bus System 8-48 Zones Panel

Features 8 basic programmable zones, expandable to 48

programmable zones Compatible with 9000 series LED/LCD keypad Maximum 24 keypads8 keypads can be connected for each

partition 3 emergency buttons on keypad Regular Arming, Stay Arming, Double Stay Arming, Forced

Arming, One Key Regular Arming, One Key Stay Arming, One Key Exit Arming, Auto Arming, Key-switch Arming

4 Programmable Outputs(triggered by 47 events, including arm, disarm, trouble, tamper, bypass, code entry, AC failure, etc)

Forced Arming Auto Arming/Auto Delay 64 User Codes + 1 Master User Code + 1 Installer Code + 1 Duress Code Telephone Line Supervision 185 Event Buffer including date, time, event and partition number Max 32 expandable modules Power Supply: 16.5VAC 50VA AUX Power Output1A Alarm Current2.5A Net Weight: 0.4 kg Metal Case and Transformer Optional

Partition Max 8 partitions with independent account number Different user code assigned to multiple partitions Independent system parameters and exit/entry delay timer for each partition

Communication 3 telephone number for CMSindependent reporting event for each telephone number Compatible with major communication formatsincluding 4+2, SIA, Ademco Contact IDetc. In addition,

the communication format can be defined yourselves to suit any digital receiver. Auto testing reportcommunication failure report Entry/exit programming mode report

Zone Expansion

Expandable to 16 zones using double zone connection method Expands additional 16 zones by using one PS-EM16 zone module, expandable to total 48 zones. Expansion module can be located 700m away from panel

Remote Power Supply/Programmable Output/Bus Expansion Module PS-483 remote power supply module with programmable output and bus expansion function Power supply Bus expands to 750m Auto charging for battery Dynamic battery testingauto disconnect under battery low voltage Bus isolation and transfer 3 x 1.5A programmable outputs(based on 33 events) 2.5A siren output

LCD Keypad

9000 Series PS-9192 Bus System 8-192 Zones Panel Features

8 basic programmable zones, expandable to 192 programmable zones Compatible with 9000 series LED/LCD keypad Maximum 32 keypads, 8 keypads can be connected for each partition 3 emergency buttons on keypad Regular Arming, Stay Arming, Double Stay Arming, Forced

Arming, One Key Regular Arming, One Key Stay Arming, One Key Exit Arming, Auto Arming, Key-switch Arming

4 Programmable Outputs(triggered by 47 events, including arm, disarm, trouble, tamper, bypass, code entry, AC failure, etc)

240 User Codes + 1 Master User Code + 1 Installer Code + 1 Duress Code 512 Event Buffer including date, time, event and partition number Forced Arming Auto Arming/Auto Delay Telephone Line Supervision Max 32 expandable modules Power Supply: 16.5VAC 50VA AUX Power Output2A Alarm Current2.5A Metal Case and Transformer Optional

Partition Max 8 partitions with independent account number Different user code assigned to multiple partitions Independent system parameters and exit/entry delay timer for

each partition optional metal case and transformer Communication

3 telephone number for CMSindependent reporting event for each telephone number Compatible with major communication formatsincluding 4+2, SIA, Ademco Contact IDetc. In addition,

the communication format can be defined yourselves to suit any digital receiver. Auto testing reportcommunication failure report Entry/exit programming mode report Remote programming software(local or remote)

Zone Expansion Expandable to 16 zones using double zone connection method Expands additional 8/16 zones by using one PS-EM16-192 zone module, expandable to total 192 zones. Expansion module can be located 700m away from panel

Remote Power Supply/Programmable Output/Bus Expansion Module PS-483 remote power supply module with programmable output and bus expansion function Power supply Bus expands to 750m Auto charging for battery Dynamic battery testingauto disconnect under

battery low voltage Bus isolation and transfer 3 x 1.5A programmable outputs(based on 33

events) 2.5A siren output

LED Keypad

8000 Series PS-8008 Economic 8 Zones Panel

Features

6 basic programmable on-board zones2 additional zones on one keypad Compatible with PS-LED8008 LED keypad Maximum 3 keypads 3 emergency buttons on keypad Regular Arming, Stay Arming, Double Stay Arming, Forced Arming, One Key Arming,

Auto Arming/Disarming, Switch Arming 5 Programmable Outputs(driven by 40 events, including arm, disarm, trouble, tamper, bypass, code entry,

AC failure, etc) 12 User Codes + 1 Master User Code + 1 Installer Code Telephone Line Supervision 255 Event Buffer including date, time, event and partition number Power Supply: 16.5VAC 50VA Switching mode power supply 1.2A AUX Power Output1A Alarm Current2.5A Dimension: 143x100mm Net Weight: 0.198 kg

Metal Case and Transformer Optional Partition

2 partitions with independent account number Different user code assigned to each partition Independent system parameters and exit/entry delay timer for each partition

Communication 2 telephone number for CMS Compatible with major communication formatsincluding 4+2, SIA, Ademco Contact IDetc. Auto testing reportcommunication failure report Entry/exit programming mode report RS-232 (TTL) - local programming Remote programming software Messaging

- 4 telephone numbers - 1 voice message (optional PS-VM3 voice module) - 2 text messages sent to pagers

PS-LED8008S LED Keypad

EX Series

PS-EX10, PS-EX18 Double Zone Technology Control Panel with Digital Communicator

EX10

PS-EX10 Single Zone4+2Zones Double Zone(8+2) Zones

PS-EX18 Single Zone8+2Zones Double Zone(16+2) Zones

Each keypad has one zone input and can connect one detector or one door contact that makes the panel increasing one zone input. The second digit within ( ) is the total number of keypad zone. When double zone feature is enable, two detectors can be connected per each input terminal. Therefore doubling zone capacity of the panel. This feature is software-oriented and is no need for extra modules. The panels will recognize all the installed devices. The extra zones function exactly like any other zone and is displaying zone status on the keypad and sending separate alarm codes for each zone.

SPECIFICATION

Supports 2-wire smoke detectors Master Code Lock (cannot change or delete the Master Code and Code 01) Supports pager reporting 3 Panic Buttons on keypad False alarm prevention package: IntellizoneAuto bypassBeep on Exit delay Programmable report delay and Recent close Alarm relay output( not for EX10) Regular ArmStay ArmDouble Stay ArmAway ArmingOne Key Regular ArmingOne Key Stay ArmingOne Key Double Stay ArmingTimed Auto ArmingKey-switch ArmingArmed by PS1 Bedside Remote Station Programmable Output PGM at 50mA(EX10 has one PGM, EX18 has two). When a specific event or condition occurs in the system, a PGM can be used to activate strobe lights, open/close garage doors and much more. There are over 1,000 events to be programmed. For example, PGM1 can open and close an automatic garage door by pressing keys [1] and [2] simultaneously on the keypad. Maximum 5 keypads can be connected Telephone line supervision High speed communication format: 12 formats including Ademco Contact ID(All code), Ademco Contact ID(Programmable code), 4+2, personal dialing 2 Flexible Partitions 256 Event Buffer 48 User codes + 1 Master Code + 1 Installer Code Upload & Download capability with software Battery Charger 350mA with dynamic battery test Aux. Power 450 mA for EX10 and 500mA for EX18 Siren Output 3A Fuseless electronic shutdown at 1A, automatic restore AC Input AC16.5V, 3A, 50-60HZ PGM Output NC or NO to Ground(), max. 50mA Serial Data Output 1200, 1, Nfor use with additional modules(not UL systems) Metal Case with transformer to be sold separately

EX Series

PS-EX24 Double Zone Technology Control Panel with Digital Communicator

PS-EX24 Single Zone12+2Zones Double Zone(24+0) Zones

Each keypad has one zone input and can connect one detector or one door contact that makes the panel increasing one zone input. The second digit within ( ) is the total number of keypad zone. When double zone feature is enable, two detectors can be connected per each input terminal. Therefore doubling zone capacity of the panel. This feature is software-oriented and is no need for extra modules. The panels will recognize all the installed devices. The extra zones function exactly like any other zone and is displaying zone status on the keypad and sending separate alarm codes for each zone.

SPECIFICATION

3 Panic Buttons on keypad False alarm prevention package: IntellizoneAuto bypassBeep on Exit delay Programmable report delay and Recent close Alarm relay output( not for EX10) Regular ArmStay ArmDouble Stay ArmAway ArmingOne Key Regular ArmingOne Key Stay ArmingOne Key Double Stay ArmingTimed Auto ArmingKey-switch ArmingArmed by PS1 Bedside Remote Station 2 Programmable Output PGM at 50mA. When a specific event or condition occurs in the system, a PGM can be used to activate strobe lights, open/close garage doors and much more. There are over 1,000 events to be programmed. For example, PGM1 can open and close an automatic garage door by pressing keys [1] and [2] simultaneously on the keypad. Maximum 5 keypads can be connected Telephone line supervision High speed communication format: 12 formats including Ademco Contact ID(All code), Ademco Contact ID(Programmable code), 4+2, personal dialing 2 Flexible Partitions 256 Event Buffer 48 User codes + 1 Master Code + 1 Installer Code Upload & Download capability with software Battery Charger 360mA with dynamic battery test Aux. Power 1000 mA Siren Output 3A Fuseless electronic shutdown at 1A, automatic restore AC Input AC16.5V, 3A, 50-60HZ PGM Output NC or NO to Ground(), max. 50mA Serial Data Output 1200, 1, Nfor use with additional modules(not UL systems) Metal Case with transformer to be sold separately PCB size : 208x77mm

EX Series PS-EX8 8 zones panel

Local System (No Digital Dialer)

Features

6 independent zones + one keypad zone + one 24 hour zone(or fire zone) One keypad emergency button 2 Programmable Outputs PGM 6 User Codes + 1 Master Code + 1 Installer Code

Control Keypad for EX Series Panel PS-LED740 LED Keypad

PS-LED740 keypad is simple to use with light weight. No need to remember any command. Just touch the corresponding key to complete a series of operations. PS-LED740 keypad is compatible with all EX series control panels. These keypads offer the perfect combination of style and simplicity. With the wide variety to choose from, EX series panel has a keypad to fit any decor.

One-touch action buttons 1-12 Key light status represent 1-12(or 13-24) zone status Four wires to connect with panel RICS microprocessor control With one input zone Adjustable keypad backlight 4 Chime zones 3 keypad-activated panic alarms AC indication (PS-LED740 only) Low consumption20mA Trouble display Fire resistance ABS

Control Keypad for EX Series Panel

PS-LED700 LED Keypad

PS-LED700 keypad is simple to use with light weight. No need to remember any command. Just touch the corresponding key to complete a series of operations. PS-LED700 keypad is compatible with all EX series control panels. These keypads offer the perfect combination of style and simplicity. With the wide variety to choose from, EX series panel has a keypad to fit any decor.

One-touch action buttons 1-12 Key light status represent 1-12(or 13-24) zone status Four wires to connect with panel RICS microprocessor control With one input zone Adjustable keypad backlight 4 Chime zones 3 keypad-activated panic alarms AC indication (PS-LED740 only) Low consumption20mA Trouble display Fire resistance ABS Size: 139x75x22mm

Control Keypad for EX Series Panel PS-LCD700 LCD Keypad

Features 32-character blue LCD with programmable labels, which allows you to program

some of the messages that appear on the keypads LCD screen.

With one input zone.

Supports up to 10 built-in languages (user selectable): English, Czech, French, Greek, Italian, Polish, Portuguese, Slovak,

Spanish and Turkish English and Hebrew English and Hungarian English, Lithuanian and Russian

Adjustable contrast and scroll speed.

Multiple zone display (status of several zones on one screen without zone label) Compatible with all EX series control panels.

Blue backlight Modern architectural design. Fire resistance ABS. Size: 157x127x25mm

PS-LC8 Local Connector The PS-LC8 can store up to four 9000 SERIES alarm control panel configurations within its own non-volatile memory. These data can be read by the RPS-9 remote programming software without a panel connected. The data can also be saved into any existing 9000 Series panels without the need of PC. So the data stored on the PS-LC8 can be transferred to any panel of the same type or read by the RPS-9 software for reviewing, editing and archiving purposes.

Features Download or upload control panel programming in less than 5 seconds Connect directly to memory connector on the control panel No need for a telephone line, PC or any other peripheral device

PS-EM16-192 8/16 Zone Expander Module For PS-9192 Control Panel The EM16-192 is a microprocessor-controlled 16-zone expander for PS-9192 control panel. Up to 23 EM16-192 expanders can be added to the control panel with a maximum zone number of 192 zones. Each expander has a tamper switch and power isolator making it ideal for use in a remote location. 6-POSITION DIP SWITCH SETTINGS The first thing that must be decided is the starting zone of this particular zone expander. The starting zone must be on a boundary of 8 zones. The 16 zones for this module will move out from this starting position. To set the starting zone, set the dip switch according to the table below:

Starting Zone No. Expander No.

Dip Switch 1 Dip Switch 2 Dip Switch 3 Dip Switch 4 Dip Switch 5

9 22 OFF OFF OFF OFF OFF 9 23 ON OFF OFF OFF OFF 17 16 OFF ON OFF OFF OFF 25 17 ON ON OFF OFF OFF 33 18 OFF OFF ON OFF OFF 41 19 ON OFF ON OFF OFF 49 20 OFF ON ON OFF OFF

57 21 ON ON ON OFF OFF 65 96 OFF OFF OFF ON OFF 73 97 ON OFF OFF ON OFF 81 98 OFF ON OFF ON OFF 89 99 ON ON OFF ON OFF 97 100 OFF OFF ON ON OFF 105 101 ON OFF ON ON OFF 113 102 OFF ON ON ON OFF 121 103 ON ON ON ON OFF 129 104 OFF OFF OFF OFF ON 137 105 ON OFF OFF OFF ON 145 106 OFF ON OFF OFF ON 153 107 ON ON OFF OFF ON 161 108 OFF OFF ON OFF ON 169 109 ON OFF ON OFF ON 177 110 OFF ON ON OFF ON 185 111 ON ON ON OFF ON

Dip switch 6 is used to disable the second block of 8 zones on this zone expander. This can be done if only an 8 zone expander is required in a particular expander address. To disable the second group of 8 zones on this expander, turn dip switch 6 ON. In this case, up to 23 expanders can be added to the system creating a total of 192 zones. SPECIFICATIONS

Input Power 12VDC Supplied from PS-9192 or PS-483 AUX Power Output Power supply to other devices, max. 100mA Current Consumption 30mA Loop Resistance 300 ohms Maximum Loop Reponse Selectable 50mS or 500mS Operating Temperature 0 to 50 degrees C Dimensions 152 x 56mm Weight 67 g

PS-EM16-48 8/16 Zone Expander Module For PS-9048 Control Panel The EM16-48 is a microprocessor-controlled 16-zone expander for PS-9048 control panel. Up to five EM16-48 expanders can be added to the control panel with a maximum zone number of 48 zones. Each expander has an tamper switch and power isolator making it ideal for use in a remote location. 4-POSITION DIP SWITCH SETTINGS The first thing that must be decided is the starting zone of this particular zone expander. The starting zone must be on a boundary of eight (8) zones. The sixteen (16) zones for this module will move out from this starting position. There are stick-on zone labels to indicate the zone numbers that you select. To set the starting zone, set the dip switch according to the table below:

Starting Zone Number Dip Switch 1 Dip Switch 2 Dip Switch 3 9 ON OFF OFF 17 OFF ON OFF 25 ON ON OFF 33 OFF OFF ON 41 ON OFF ON

Dip switch 4 - Dip switch 4 is used to disable the second block of eight (8) zones on this zone expander. This can be done if only an eight- (8) zone expander is required in a particular expander location. In this case, up to 5 expanders can be added to the system creating a total of 48 zones. To disable the second group of eight (8) zones on this expander, turn dip switch 4 ON. SPECIFICATIONS

Input Power 12VDC Supplied from 9048 panel or 483 module AUX Power Output Power supply to other devices, max. 100mA Operating Current 30mA Loop Resistance 300 ohms Maximum Loop Response Selectable 50mS or 500mS Operating Temperature 0 to 50 degrees C

Dimensions 152 x 56mm Weight 67 g

PS-OM8-1 Output Expander & Printer Interface PS-OM8-2 Output Expander Interface The OM8 is an auxiliary module used to expand the capabilities of the 9000 series control panels. While each unit has some unique features described in this section and also in the terminal descriptions, the basic installation and programming instructions are applicable to both modules.

OM8-1 Features: Microprocessor controlled 8-output module Equipped with 8 low current trigger outputs (see terminal drawing) Up to 8 modules can be added for a total output count of 64 Each output can be programmed to follow up to 8 different schedules to either activate the output during the

on time, or used in conjunction with another programming option to create time zones Has an optional tamper switch and auxiliary power terminal (refer to terminal descriptions) making it ideal

for use in a remote location Has a built-in parallel interface for local printouts of all communicator activity

OM8-2 Features: Microprocessor controlled 7-relay output module Designed with 7 separated normally open and normally closed relay contacts for a variety of applications,

including access control, home control/automation, wireless interfaces, and other functions. Note: Access control and home automation have not been verified by UL testing.

Includes 1 low current trigger output (output 8) Up to 8 modules can be connected to the 9000 control panel Can be programmed to activate for an event in any or all partitions Each relay can be programmed to follow up to 8 different schedules to either activate the relay during the

on time, or used in conjunction with another programming option to create time zones Has an optional tamper switch and auxiliary power terminal (see terminal descriptions) making it ideal for

use in a remote location

PS-483 Remote Power Supply and Bus Extension Module

The PS-483 is a microprocessor controlled remote power supply module for the PS-9048 / PS-9192 control panel. This power supply module has 3 programmable outputs and one dedicated bell output. A maximum of 8 power supply modules can be added to the control panel for a total output count of 32, of which 24 are programmable and 8 are dedicated bell outputs. These 24 programmable outputs can be used as auxiliary power, smoke detector power, siren driver power, etc. Each power supply module has a Tamper terminal that can be used to supervise the metal enclosure. When the power supply module is connected to the control panel, the maximum total wire run from the panel to all devices, including the PS-483, is 750m. Additionally, the maximum total wire run from the power supply module to all outgoing devices is 750m.

Terminal Description DATA Connect to the DATA terminal of PS-9048 or PS-9192 panel. This terminal is the incoming

data-signaling terminal to PS-483. The maximum cable run from panel to all devices including PS-483 is 750 meters.

COM Connect to the COM terminal of PS-9048 or PS-9192 panel. This is the common point.

POS Connect to AUX+ of PS-9048 or PS-9192 panel. This supply power to PS-483.

DATA This terminal is the outgoing data-signaling terminal for bus extension. The maximum cable run for PS-483 to all devices is 750 meters.

COM Common terminal for all devices powered by PS-483. + 1 Programmable output current limited to 1.9A (1 + 2 + 3) + 2 Programmable output current limited to 1.9A COM Common terminal for all devices powered by PS-483. + 3 Programmable output current limited to 1.9A

Bell + Positive output to bell limited to 2.5A Bell - Negative output to bell limited to 2.5A

Total current 2.5A

TAM Connect the normal close tamper switch between this terminal and COM. If switch 4 is OFF, this feature is disable.

GND Earth terminal AC AC16.5V input, 3A AC AC16.5V input, 3A BAT Connect to lead acid rechargeable battery

SPECIFICATIONS Power Source AC Input 220V, 320mA with 16.5VAC 40VA Transformer Current Consumption 10mA Standby Auxiliary Power 12V, limited to 2.5A with 40VA transformer Battery 50AH for 24 hour backup, 3-17AH in parallel Dimension 120 x 150 mm Net Weight 169 g

PS-PP8 Multi-points Bus Module

GENERAL DESCRIPTION The PS-PP8 is a microprocessor-controlled multi points bus interface module for the PS-9048 and PS-9192 control panel. The Multi-points System provides two-wire bidirectional communications with up to 255 individually addressed devices. The total number of devices in a system is limited by the I/O capability of the panel. For example, the PS-9192 can support a maximum of 192 zones mapped to 192 input device addresses and an additional 48 addresses for output devices. FEATURE Three loop outputs are provided for interface with the point ID devices. A single loop output can support the full 255 point ID devices as long as the wire run limits are not exceeded. The total number of devices can be distributed across the three loop outputs to meet wire run limit requirements. Include 3 loops of multi-points bus Each loop can reach 3000m Expands PS-9048 to 48 zones and PS-9192 to 192 zones Expands 48 programmable outputs Specification Operating CurrentMax 170mA Operating Temperature0 to 50 degree C Shipping Weight194 g Dimension150mm x 120mm (LxW)

PS-EM1 Sing Zone Expansion Module PS-EM1 is a microprocessor controlled single zone input module for PS-9048 and PS-9192 panel. By using PS-PP8 multi-points bus module, maximum 192 piece of PS-EM1 can be connected on the bus and expands to 192 zones input with address. Power isolation is provided so that it is installed far away from the main panel.

FEATURES z Compatible with multi-points bus module PS-PP8 z Photoelectric isolation between module and bus so that the driving level of bus is

increased. Thus the ability of RFI/EMI rejection is also increased. z Voltage isolation2500Vrms z Bus trouble display by LED z LED indication for zone alarm and tamper z Using end of line resistor 2.2k ohm z By independent power supply

Connect to PS-9048 or PS-9192 panel (this diagram is for PS-9192 Alarm Panel) Specification

Power Input 12VDC Current Draw Maximum 30mA Mounting Surface mounted Tamper Switch Contact opened when cover is removed. Address Setting By DIP switch setting Operating Temperature 0 to 50 Dimension 90mm x 60mm x 32mm (LxWxD) Weight 73 g

...

PS-TCM40 Telephone Control Module The TCM40 telephone control module is an interactive phone module for all brands of panels that interconnects your telephone with your security system. It allows authorized users to operate the security system from any Touch Tone telephone, whether it is at the protected site or anywhere else in the world.

SPECIFICATION

Power Input 12V DC from panel Compatible Panels All kind of panels with NO programmable output

(PGM) and key-switch Arm/Disarm functions Operating Current Standby55mA

Operating130mA Operations 1. Arm

2. Disarm 3. Check Arm/Disarm status 4. Switch on other equipments 5. Sound monitoring and speaking to site

(Options of additional module added) 6. Relay output 7. Set ring number and lock code 8. Change access code of TCM40

Relay Output 1 x NO and 1 x NC (with time delay setting) Telephone Type Tone Mounting Fixed inside metal case Dimension 90x60x20mm (LxWxH) Shipping Weight 53 g

PS-VM2 Voice Module

INTRODUCTION The PS-VM2 voice module is an advanced electronic record/playback module for short voice messages, up to 20 seconds long. It can change a digital dialer into a voice dialer. It is designed for manual recording and electronically triggered playback. When the PS-VM2 is used in conjunction with alarm control panels with digital communicators, calls for help due to fire or burglary may be prerecorded, for automatic transmission by telephone. A miniature microphone and an easily accessible RECORD pushbutton are included in the PS-VM2. When the digital dialer is answered, the PS-VM2 will play the recorded message and repeat over and over again until the dialer stop the line.

Model PS-VM2 Power source DC12V Standby Current 10mA Operating Current 100mA Panel Compatible with all panel with digital dialer Working Mode 1. Recording

2. Testing voice message 3. Playing back of voice message

Message Time 20 seconds Format of Telephone Network Tone and pulse Communication Format of Digital Dialer

Must set to personal reporting (no handshake)

Speaker Output 1.5V 600 ohm line or 8 ohm speaker for testing of voice message Microphone Built-in condenser microphone Message memory Volt free EEPROM Operating Temperature -20 to 500 C Size 75x55 mm Weight 50g

Phone line backup function. SPECIFICATION

PS-VM8 Voice Module with listen in The PS-VM8 voice module is an advanced electronic record/playback module for short voice messages, up to 20 seconds long. It can add voice message for a digital dialer. It is designed for manual recording and electronically triggered playback. When the PS-VM8 is used in conjunction with alarm control panels with digital communicators, calls for help due to fire or burglary may be prerecorded, for automatic transmission by telephone. A miniature microphone and an easily accessible RECORD pushbutton are included in the PS-VM8. When the digital dialer dial to a personal telephone and is answered, the PS-VM8 will play the recorded voice message and then the user can also listen-in the sound of his home until he hands up the line. When the digital dialer of the panel dials to an alarm monitoring centre, it can also set up communication with the digital receiver automatically. Installation is simple. Change of your panel circuit is not required. It is easily to be fixed in the panel case or elsewhere due to its small size.

SPECIFICATION

Model PS-VM8 Power source DC12V Standby Current 15mA Operating Current 50mA Panel Suitable for all panel with digital dialer Working Mode 4. Recording

5. Testing voice message 6. Playing back of voice message or voice monitoring.

Message Time 20 seconds Format of Telephone Network Tone and pulse Communication Format of Digital Dialer

All format

Voice Message and Voice Monitoring Mode

1. Separated operation for voice message and voice monitoring, for example, voice message for first dialing and voice monitoring for second dialing.

2. Voice monitoring is OFF, only voice message is available. 3. After one dialing message is playback for 4 times, then switch to voice monitoring

until the line is hung up. This is suitable for short message. 4. After one dialing message is playback for 2 times, then switch to voice monitoring

until the line is hung up. This is suitable for longer message. Speaker Output 1.5V 600 ohm line or 8 ohm speaker for testing of voice message Microphone Built-in condenser microphone Message memory Volt free EEPRON Operating Temperature -20 to 500 C Size 75x55 mm Weight 50 g

PS-GSM520 GSM Backup Dialer

The PS-GSM520 GSM auto dialer is compatible with Dual-Band 900MHZ and 1800MHZ system that adopts Siemens modules.

The GSM dialer can connect to security panel or normal phone set. Normally the panel is working on wired PABX phone line system, but when the wire phone line is disconnected, it will transfer to GSM dialer system automatically. So users never worry the cutting of phone line by intruders.

Features:

Specification

Phone line backup function. Compatible with all alarm panels with built-in digital dialer. PABX phone line transfer to GSM system automatically. Easy installation.

Tel Line socket Terminal GSM Frequency GSM 900Hz/1800Hz Status Indication Lamp Slow Flashing = normal

Fast Flashing = activating GSM No Flashing = not normal

Tel Line Status Lamp Flashing when telephone line is trouble Tel Trouble Output N.O., closed when telephone line has trouble GSM Status Lamp Flashing when GSM is trouble GSM Trouble Output N.O., closed when GSM has trouble Power Supply 12VDC/500mA with battery backed up Contact Rating 3W, max 100mA, max 60VDC, internal resistance=16 ohm Operation Temperature -25--70 Dimension 125x67x30mm

Back panel

PS-803 Power Supply Board

This power supply with charger can be used to maximize the security and efficiency of any alarm or access control installation. The output voltage is selectable at 6V, 12V, or 24V DC. z For automatic recharging of back-up batteries. z Fused output for a regulated charge. z Automatic switch-over to the backup battery if main power is lost or cut. z Includes plastic plug for easy installation Specification

Model PS-803 Rating 1.5A continuous rating, 2A peak output DC Output Voltage 6V, 12V, or 24V DC selectable LED Indication Indicate charging status Short Circuit Protection Built in Size 74x69mm Weight 100 g

PS-804, PS-805 Switching Power Supply Board

These power supplies with chargers can be used to maximize the security and efficiency of any alarm or access control installation. The output voltage is selectable at 6V, 12V, or 24V DC. z For automatic recharging of back-up batteries. z Fused output for a regulated charge. z Automatic switch-over to the backup battery if main power is lost or cut. z Includes plastic plug for easy installation Specification

Model PS-804 PS-805 Rating 2.5A continuous rating, 3A

peak output 4A continuous rating, 5A peak output

DC Output Voltage 6V, 12V, or 24V DC selectable LED Indication Indicate AC power and DC power status Short Circuit Protection Built in Size 97x72mm 97x72mm Weight 180 g 189 g

PS-817 Switching Power Supply Board This power supply with chargers can be used to maximize the security and efficiency of any alarm or access control installation. It is special for gel-cell or lead-acid battery with output voltage of 12VDC. z For automatic recharging of back-up batteries. z Fused output for a regulated charge. z Automatic switch-over to the backup battery if main power is lost or cut. z Includes plastic plug for easy installation Specification Model PS-817 Rating 1.75A continuous rating, 2A peak output Input Voltage 16.5VAC DC Output Voltage 13.8VDC Charge current 380 mA or 700 mA selectable LED Indication Indicate charging status Short Circuit Protection Built-in Size 75 x 57.5mm Weight 86g

PS-285 Outdoor Alarm Bell Box PS-285 is a microprocessor controlled intelligent alarm bell box with siren, flasher, back-up battery and tamper switch combined in one unit. The large, flat front area is suitable for applying a company sticker. PS-285 offers excellent protection for those jobs where audible warning is most important. Features

Siren activates upon wire cut Selectable siren timer Strong flash lighting Rechargeable battery circuit Double tamper switches for protection of opened and removed Led indicates power failure Siren beeps once every 10 seconds if control panel power failure more than 5 minutes Siren and flasher activate upon wire cut Easy installation

PS-2201 Ultra-sensitive Air Pressure Detector

PS-2201 is a sophisticated high performance air pressure detector, with compact size and streamlined design is ideal for the security application. This detector can detect very small pressure change of air and gas which are hardly detected by conventional sensors. It can be used to detect the opening or closing of doors at well sealed room. Unlike traditional PIR motion detector, its sensitivity cannot be affected by environmental temperature. Thus false alarm is very limited compared with PIR detector.

Features Applications z Ultra sensitive z 3D Detection z Sound and Vibration do not

detect z No installation height limit z Fire resistant case z Metal shield High density

SMD design

z Suitable for banks treasury or general applications.

z Tidy installation, replace many

magnetic switches for doors/windows

Sensitivity against pressure change and frequency:

Specification

Model PS-2201 Sensor Low noise, high sensitivity, air pressure sensor Startup Time 60 seconds after power up Detection of Pressure Change

1 Pa to 100 kPa

Detection Range 500 M3 Installation Height Any height Alarm Indication Blue LED constant light 3 secondscan be disabled Alarm Output N.C., rating 28Vdc 0.15A (Optional N.O.) Anti-Tamper Switch N.C., opens when cover removed, rating 0.15A, 28Vdc Anti RFI 10V/m (80-1000MHz) Power Input 9-16Vdc, 18mA Operating Temperature 10~50 Operating Humidity 95% Net Weight/Shipping Weight

105g/116g

Size 6610548mm (WxHxD)

PS-3301 PIR Motion Detector

High performance passive infrared motion detector, compact size and streamlined design is ideal for the security application.

Auto pulse signal processing, 2 levels adjustable Auto temperature compensation 2nd generation Fresnel lens Optional other lenses High density SMD design Additional Connector for EOL resistor Fire resistant case

Standard Lens Coverage Range:

Specification

Model PS-3301 Sensor Low noise, high sensitivity, dual element, PIR Sensor Pulse Count (Sensitivity) Two levels auto pulse signal processing, 1-3 pulses or 2-6 pulse selectable Temperature Compensation Auto Startup Time 60 seconds after power up Detection Speed 0.2-7m/sec Lens Second generation Fresnel lens White Light Immunity Yes Coverage 12m x 1100 Zones 9+5+5+3=22 Installation Height 1.1-3.1m adjustable Alarm Indication Green LED constant light 3 secondscan be disabled Alarm Output N.C., rating 28Vdc 0.15A Anti-Tamper Switch N.C., opens when cover removed, rating 0.15A, 28Vdc Power Input 9-16Vdc, 18mA Operating Temperature 10 ~50 Operating Humidity 95% Net Weight/Shipping Weight 80g/115g Size 6610548mm (WxHxD)

PS-6601 Dual-Technology MW/PIR Motion Detector

The 6601 is a dual-technology digital detector designed for ultimate false alarm immunity in residential and office applications. In this microwave-supervised motion detector, digital processing software treats the infrared detector as the dominant unit, and seeks microwave confirmation of detected signals only in the presence of infrared detection. Without this mandatory second opinion, an alarm cannot be generated. PS-6601 implements a new generation of patented technologies, including advanced microwave DRO front-end utilizing Digital Signal Processing , MW motion simulation for periodic self-testing and True Motion Detection Technique (TMDT) using Fuzzy Logic algorithm. The result is the industry's best detection accuracy, false alarm immunity and ultimate long-term reliability - in an elegant, durable and easily installed professional device designed for harsh environments. 6601 has slim elegant design suitable for any residential or office environment.

Specification

Standard Lens Pattern:

Direct conversion from analogue to digital Digital software(TMDT) No dead zone standard lens Digital microwave detection Reflow design Digital auto pulse signal processing Field test mode Digital temperature compensation Independent LED Indication for MW, PIR and Alarm

Sensor Type Dual element, rectangular PIR sensor Auto Temperature Compensation Yes, Digital

Digital Processor Digital auto pulse signal processing & digital TMDT algorithm software filter out non-motion signal and RFI/EMI signal

Detection Speed 0.2 7m/sec Range 12mx 90 (standard lens) Sensitivity Adjust One pulse count or 2 pulse count

PIR

PIR Indication Green LED flash 5 seconds Antenna Type Flat micro strip antenna with FET oscillator Frequency FCC and DOC 2.45GHz Detection Method Doppler shift Processing Doppler + Energy Analysis Digital Filtering 50 / 60 Hz Self-Test Microwave self-test Processor Type 12 / 8 bit intelligent logic Sensitivity Adjust Adjustable from 25% to 100% (3-12m)

Microwave

MW Indication Green LED lights 5 seconds

Power Input 10 16VDC 30mA Installation Height 2.1m +/- 10% Alarm Indication Red LED constant light 3 sec (can be disabled) when both MW and PIR sensors are triggered. Alarm Output N.C., 28Vdc 0.15A Trouble Indication Red and Green LED flash alternatively. Trouble Output N.C., 28V dc 0.15A Tamper Output N.C., 28Vdc 0.15A Mounting Direct mount on flat wall or corner, or using swivel bracket suitable for ceiling and wall mounted Operating Condition Humidity 95%, temperature -20 ~ +50 Net Weight / Shipping Weight

Others

Size 6610548mm(WHD)

PS-3302 Infrared Motion Detector High performance passive infrared motion detector, compact size and streamlined design is ideal for the security application.

Auto pulse signal processing, 2 levels adjustable Metal shield RFI/EMI rejection Auto temperature compensation Lodif segment Fresnel lens Optional other lenses High density SMD design Fire resistant case

Model PS-3302 Sensor Low noise, high sensitivity,

element, rectangular PIR sensor Processing 2 levels auto pulse signal

processing, auto temperature compensation

Startup Time 60sec after power up Detection Speed

0.27m/sec

Sensitivity 2 levels adjustable Operating Temperature

10 ~50

Power Input 916Vdc, stand-by 18mA, alarm 20mA

Lens Second generation Fresnel lens White Light Protection

White light 10,000 lux interference rejection

Coverage 11m 110 Metal Shield Yes Zone 9+5+5+3=22 Installation Height

1.13.1m adjustable

Alarm Indication

Blue LED constant light 3 seconds (can be disabled)

Alarm Output

N.C., 28Vdc 0.15A

Anti-Tamper Switch

N.C., opens when cover removed, 0.15A, 28Vdc

Operating Humidity

95%

Weight 80g Size 669352mm (WxHxD)

Standard Lens:

PS-DG3370 Digital PIR Motion Detector The digital series motion detector DG3370 revolutionizes electronic detection with the latest in digital and optical technology. The DG3370 detector brings reliability and catch performance to a whole new level in the security alarm market for the residential and commercial community. Utilizing patented digital processing techniques, controlled by microcomputer, that eliminate many components and noisy amplifiers, the detector solve the problems of distortion, added noise and saturation caused by analog circuitry. They employ the patent-pending True Motion Detection (TMDT) Technology, with an exceptionally high million-per-second sampling rate. The result is absolute detection coverage with superior immunity to false alarms. The series also introduces new patent-pending cylindrical optics and spherical-shaped lens to give comprehensive detection coverage. The products unique 10-segment design creates true 3D multiple vertical curtains in contrast to conventional beams. Thanks to the new cylindrical optics and spherical-shaped 3-D lens which is free of vertical adjustment with uniform detection sensitivity beginning at 0.5 meter (creep-zone) away from the detector up to a distance of 15 meters. New lens material protects against white light and strong UV rays assuring long lasting sensitivity. DG3370 sleek, ultra modern design is attractive in any home or office. Digital signal processing, 2 levels adjustable Digital temperature compensation Cylindrical optics and spherical-shaped 3-D lens Same sensitivity for near and far zone Free of vertical adjustment for easy installation Additional Connector for EOL resistor Fire resistant case Coverage Range:

Specification

Model PS-DG3370 Sensor Low noise, high sensitivity, dual element, PIR Sensor Signal Processing microprocessor-controlled Pulse Count (Sensitivity) Two levels auto pulse signal processing, 1-2 pulses selectable Temperature Compensation Auto Startup Time 60 seconds after power up Detection Speed 0.2-7m/sec Lens Cylindrical optics and spherical-shaped 3-D lens White Light Immunity Yes Coverage (0.5-15)m x 900 Number of Curtain Beams 10 Installation Height 1.8-2.4m Alarm Indication Blue LED constant light 3 secondscan be disabled Alarm Output N.C., rating 28Vdc 0.15A (Optional N.O.) with 30 ohm resistance in series Anti-Tamper Switch N.C., opens when cover removed, rating 0.15A, 28Vdc RFI Protection Greater than 20 V/m (20 MHz to 1000MHz) Power Input 9-16Vdc, 8mA Operating Temperature 10 ~50 Operating Humidity 95% Net Weight/Shipping Weight 105g/116g Size 6610548mm (WxHxD)

PS-DG3372 Digital PIR Motion Detector The power of smart digital processing is yours with Posonics Digital Motion Detector series. Each detector converts, amplifies and processes the sensors signal entirely digitally, for precision movement analysis and superior dependability. Many motion detectors that claim to be digital actually use analog technology in a portion of their detection process, which degrades the sensors signal and reduces the performance of your motion detector. With innovative features like patented 100% Digital Detection, patented Auto-Pulse Signal Processing, metal shield and Digital Automatic Temperature Compensation, Posonics Digital Motion Detector series provide outstanding performance and false-alarm immunity.

FEATURES Digital Motion Detection (patented) Digital Shield algorithm software Entry/Exit Analysis Digital Single/Dual Edge Processing Auto Pulse Signal Processing (patented) Automatic Temperature Compensation Metal shield for maximum RFI/EMI rejection

SPECIFICATIONS

Model PS-DG3372 Sensor Dual Element Infrared Sensor Infrared Sensor Geometry Rectangular Coverage 110 (Standard), 12m x 12m (40ft x 40ft) Installation Height 2.1m to 2.7m (7ft to 9ft) Operating Temperature -20C to +50C (-4F to +122F) Voltage Input Typically 11-16VDC Current Consumption 15mA Maximum Lens 2nd Generation Fresnel Lens, LODIFF, segments Alarm Indication Blue LED lamp lights up for 3 seconds Alarm Output 100mA / 28VDC, N.C. (optional: Form C relay 5A / 28VDC, N.C. / N.O.) Anti-tamper Switch 150mA / 28VDC, N.C. Weight 80g Size 66x93x52mm (WxHxD)

Coverage Range:

PS-3308 Pet Immunity PIR Motion Detector Introduction: The PS-3308 digital motion detector combines a patent-pending circuit design, dual-optic sensor design, an interlaced pet-friendly lens pattern and advanced digital processing technologies to differentiate between people and pets while maintaining superior coverage. The lens and sensors ensure that pets do not generate the signals required for an alarm situation. Since the signal is converted, amplified and processed in the digital domain without any analog circuitry, the parameters of the complete signal are analyzed by sophisticated software algorithms and compared to a bank of movement signals. This allows the motion detector to precisely identify an alarm situation and prevent false alarms. Pet Immunity: An object must simultaneously cross the beams of both the upper and lower sensors before a signal is determined to be a potential alarm situation. Since pets do not have the height or mass to cross the beams at the same time and generate the required signal criteria, they will not cause false alarms.

Specification

Pet Immunity Lens:

Model PS-3308 Sensor 2 Low noise, high sensitivity, dual

opposed, dual element, rectangular beam

Processing Digital auto pulse signal processing (2 levels), auto temperature compensation

Opposed Detection Yes Signature Analysis Energy, peak, duration, width & shape Detection Speed 0.27m/sec Detected Animal Weight 40 kg Sensitivity 2 levels adjustable Digital Software Yes Digital Entry/Exit Signal Analysis

Yes

Operating Temperature 10~50 Power Input 916Vdc, 15mA Lens Second generation Fresnel lens Coverage 11m 900 Metal Shield Yes RFI/EMI rejection 60-70V/m Installation Height 1.13.1m adjustable Zones (11+9+5+5+3) 2 Alarm Indication Blue LED constant light 3 sec (can be

disabled) Alarm Output N.C., 28Vdc 0.15A Anti-Tamper Switch N.C., opens when cover removed,

0.15A, 28Vdc Operating Humidity 95% Net Weight/Shipping Weight

144g/155g

Size 6612752mm (WxHxD)

PS-3305 Ceiling PIR Wide Angle Motion Detector Indoor ceiling mounted passive infrared motion detector with smart appearance is ideal for the application of security.

Ceiling mounted Interlocking quad element coverage pattern 2 levels auto pulse signal processing Auto temperature compensation Super wide angle Fire resistant case

Specifications

Model PS-3305 Sensor Low noise, high sensitivity,

interlocking quad element, hexangular type PIR

Processing Two levels auto pulse signal processing, auto temperature compensation

Startup Time 60 seconds after power up Detection Speed 0.2-7 m/sec Sensitivity Two levels adjustable Power Input 9-16Vdc, 18mA Lens Fresnel segment Coverage 10.37 m (at height 2.4m) Zones (24+12+6)=42 Installation Height 2.2-8m Alarm Indicator Blue LED, constant light 3 seconds

can be disabled Alarm Output N.C. and N.O. selectable,

28Vdc 0.15A Anti-Tamper Switch N.C., opens when cover removed,

0.15A, 28Vdc Anti RFI 10V/m (80-1000MHz) Operating Temperature

10~50

Operating Humidity 95% Weight 70g Size 9228mm

Interlocking quad element for 3600 degree detection

PS-6605 Ceiling Dual-Technology Motion Detector In this microwave-supervised motion detector, digital processing software treats the infrared detector as the dominant unit, and seeks microwave confirmation of detected signals only in the presence of infrared detection. Without this mandatory second opinion, an alarm cannot be generated. In addition, it uses advanced digital True Motion Detection Technology (TMDT). Once motion signal is received, it compares and analyses the signal with the true motion signal in database memory and ignores extraneous noises in order to eliminate false alarm. It is ideal for the protected area where false alarm must not occur. PS-6605 uses interlocking quad element PIR sensor for real 360 degree coverage pattern. It is easily installed in any ceiling up to 8m (26 ft), and is durable enough even for harsh environments in residential, office or commercial applications. The result is the industry's best detection accuracy, false alarm immunity and ultimate long-term reliability in an elegant professional ceiling-mounted device. Direct conversion from

analogue to digital Digital temperature compensation

Digital software Integrated LED Indication Digital microwave detection Reflow design Digital auto pulse signal

processing Field test mode

Specification:

Interlocking quad element

Sensor Type Interlocking quad element, rectangular PIR sensor

Focal Point Lens 1.2 Lens 2nd generation Fresnel lens Auto Temperature Compensation

Digital

Digital Processor Digital auto pulse signal processing & digital TMDT algorithm software filter out non-motion signal and RFI/EMI signal

Range 10.37m (mounting height 2.4m) Sensitivity 2 levels adjustable

PIR

PIR Indication Green LED flashes 5 seconds Antenna Type Flat micro strip antenna with FET

oscillator Frequency FCC and DOC 2.45GHz Detection Method Doppler shift Processing Doppler + Energy Analysis Digital Filtering 50 / 60 Hz Self-Test Microwave self-test Processor Type 12 / 8 bit intelligent logic Sensitivity Adjustable

Microwave

MW Indication Green LED lights 5 seconds Operating Temperature

-20 ~ +50

Power Input 10 16VDC 30mA Detection Speed 0.2 7m/sec Installation Height 2.2-8m Alarm Indication Red LED constant light 3 sec (can be

disabled) Alarm Output N.C., 28Vdc 0.15A Tamper Output N.C., 28Vdc 0.15A Trouble Indication Red and Green LED flash

alternatively Trouble Output N.C., 28Vdc 0.15A Anti RFI 10V/m (80-1000MHz) Operating Humidity 95% Weight 75 g

Others

Size 9228mm

PS-3363 Directional Digital Motion Detector In the past when using curtain detectors, occupants have to lose freedom of movement within the premises, because they have to avoid triggering an alarm when entering the protected area. POSONIC PS-3363 directional motion detector provides an innovative solution to this problem. This technology utilizes a sophisticated signal processing algorithm to recognize the direction from which the protected area had been entered. If an intruder breaks into the perimeter from outside, an alarm will be generated immediately. However, if the occupants wander into the detectors coverage area occasionally, a delay timer will be initiated during which an alarm will not occur. As a result, 3363 can distinguish between an occupant and an intruder. This capability is ideal for perimeter protection while people are active within the house. The delay timer can be adjusted from 5 seconds to 15 minutes by 4 setting levels for different protection level and permitting occupants who go out to return inside within a predetermined time period without triggering an alarm. If the occupants go out, re-enter and immediately re-exit, the return timer is reset and will start a new countdown again. PS-3363 is suitable for ceiling and wall mounted according to site condition and can be matched with all decoration. * Two separate outputs * Inward motion alarm relay * Bidirectional motion detection relay * Adjustable return timer * 2 color LED indicating inward and outward motion * Microprocessor controlled * Wall and ceiling mounted * Auto Temperature Compensation * Auto Pulse Control * Fire resistant casing

SPECIFICATIONS Curtain Lens Pattern:

Model PS-3363 Sensor Low noise high sensitivity dual element PIR

sensor Processor Microprocessor controlled Warm Up Time 30 seconds Sensing Speed 0.27m per second Power Source 916Vdc,18mA Alarm Current 25mA Lens 2nd Generation Fresnel lens Installation Height 2.2-2.6m for wall mounted, 2.6-6m for ceiling

mounted Coverage Range Rectangular curtain of 4x7m for wall mounted,

triangle curtain with bottom width of 6m for ceiling mounted

Beam Angle 00-100, adjustable Return Timer 5 seconds, 45 seconds, 5 minutes, 15 minutes

selectable Direction Display Green LED indicates outgoing, red LED indicates

incoming alarm signal Alarm Indication Red LED lights for 3 secondscan be off Alarm Output Incoming motion alarm output, NC output with 18

ohm resistor in series28Vdc 50mA(Optional normal opened)

Detection Output Bi-directional motion output, NC output with 18 ohm resistor in series28Vdc 50mA(Optional normal opened)

Tamper Switch Normal closed contact,0.15A28Vdc Operating Temperature 10 to 50 Net Weight/Shipping Weight

75/85g

Dimension 5181x38mm WxHxD

Ceiling Mounted (Side View)

Wall Mounted (Side View)

PS-462 Small Digital Curtain PIR The PS-462 is the smallest and most elegant digital curtain-pattern PIR detector using advanced digital True Motion Detection Technology. Once motion signal is received, it compares and analyses the signal with the true motion signal in database memory and ignores extraneous noises in order to eliminate false alarm. Detailed coverage patterns and mounting alternatives are given in Figures 2 through 6 below. Suitable for protection of window, door, balcony and ceiling Vertical or horizontal protection Microprocessor controlled True Motion Detection Technology Adjustable range 2-6m Fire resistance casing SPECIFICATION

Model PS462 Sensor Low noise high sensitivity dual

element rectangular PIR sensor Sensing Speed 0.26 m/second Operating Temperature 10 to 50 Power Source DC10-16V, 12.5mA Lens Fresnel vertical protection lens Protection Range Distance: 2m, 4m, 6m selectable

Height: 3.6m Mounting Height Max 3.6m Mounting Wall mount or ceiling mount RFI Protection Anti RFI, > 20V/m to 1000MHz Alarm Indication Red LED on Alarm Period 3 seconds Alarm Output Normal close, 20 ohm internal

resistance, 24Vdc 0.1A Tamper Protection Normal close, open circuit when

cover is removed, contact 0.1A, 24VdcWeight 30g Dimension 2870x25mm (WxHxD)

PS-3366 Vertical-view Infrared Motion Detector The PS-3366 was created to handle narrow vertical-view applications such as card-access exit requests, protection of windows, doors, paintings or other art objects, monitoring customers at entry/exit of stores, and other security situations where non-volumetric protection is called for. Vertical detection For access control and security application Auto pulse signal processing Auto temperature compensation Fire resistant case

Specifications

Model PS-3366 Sensor Low noise, high sensitivity, dual element,

rectangular beam Processing Two levels auto pulse signal processing, auto

temperature compensation Detection Speed 0.2-7m/sec Sensitivity Two levels (Adjustable) Operating Temperature

10~50

Power Input 9-16Vdc or 20-27Vdc, 18mA Lens Fresnel vertical segment Coverage Alarm mode: Vertical 6.6m high x 4.5m width

Access mode:Vertical 2.1m high x 1.5m widthDetection Angle Vertical 00 or 100, Adjustable Metal Shield RFI/EMI rejection Alarm Indication Blue LED lights up Alarm /Signal 0.5-25sec, adjustable Alarm Output N.C. or N.O. selectable, 28Vdc 0.15A Anti-Tamper Switch

N.C., opens when cover removed, 0.15A, 28Vdc

Operating Humidity

95%

Weight 85g Size 11493x35mm (WxHxD)

PS-6609 Outdoor Motion Detector Combined Double PIR & Microwave technology, Pet Immune and Weatherproof. The 6609 is a triple-technology outdoor digital detector designed for ultimate false alarm immunity. In this microwave supervised motion detector, digital processing software treats the infrared detector as the dominant unit, and seeks microwave confirmation of detected signals only in the presence of infrared detection. Without this mandatory second opinion, an alarm cannot be generated. PS-6609 implements a new generation of patented technologies, including advanced microwave DRO front-end utilizing Digital Signal Processing , MW motion simulation for periodic self-testing and True Motion Detection Technique (TMDT) using Fuzzy Logic algorithm. For example, wind and waving leafs will not cause false alarm. The result is the industry's best detection accuracy, false alarm immunity and ultimate long-term reliability - in an elegant, durable and easily installed professional device designed for harsh environments. 6609 has classic elegant design suitable for any residentialcommercial and industrial environment. In addition, it has the following features: 4-dimensional, all-in-one motion detector. Two synchronized PIR sensors. Auto Background analysis Selectable PIR detection sensitivity. Selectable Microwave detection sensitivity. Selectable detection technology combination. Memory latched input.

Auto temperature compensation. Weatherproof casing

Multi-directional mounting bracket

Model PS-6609 PIR Sensor Two synchronized rectangular dual element low

noise high sensitivity pyroelectric sensor Microwave Frequency 10.525 GHz PIR Sensitivity Adjustable by variable resistor Microwave Sensitivity Adjustable by variable resistor Selection of Detection Mode Microwave + PIR or Microwave Processor Microprocessor controlled Sunlight/Strong Light Filter Built-in white light filter Temperature Compensation Auto Digital Microwave Indication Yellow LED on for 2 seconds PIR Indication Red LED on for 2 seconds Alarm Indication Red and Yellow LED flashes for 2 seconds Alarm Contact N.C. and N.O. relay, 0.25A/50V DC Tamper Switch N.C., 0.1A/28V DC Warm-up Time 1 minutes Detection Speed 0.1-5 m/seconds Coverage Distance 12m x 1100 Pet Immunity Up to 45 kg RFI Immunity Greater than 20V/M, DC to 1GHz Memory Memory latch input Weatherproof IP65 Power Supply 10-16V DC Current Drain 24mA @12V Operating Temperature -200 C to 700C Humidity 95% Dimension WxHxD 95x168x65mm Weight 203g

Optional bracket

PS-5509 Outdoor Pet Immunity Digital PIR Motion Detector The 5509 digital motion detector combines a patent-pending circuit design, dual-optic sensor design, an interlaced pet-friendly lens pattern and advanced digital processing technologies to differentiate between people and pets while maintaining superior coverage. The lens and sensors ensure that pets do not generate the signals required for an alarm situation. Since the signal is converted, amplified and processed in the digital domain without any analog circuitry, the parameters of the complete signal are analyzed by sophisticated software algorithms and compared to a bank of movement signals. This allows the motion detector to precisely identify an alarm situation and prevent false alarms. An object must simultaneously cross the beams of both the upper and lower sensors before a signal is determined to be a potential alarm situation. Since pets do not have the height or mass to cross the beams at the same time and generate the required signal criteria, they will not cause false alarms. Impact and temperature resistant casing (-35C to 50C / -31F to 122F) Extremely reliable and false-alarm free Dual Optical Filtering System UV protected lens Dual optics (2 dual opposed element sensors) Digital Dual Opposed Detection Multi-level sensitivity adjustment Can be used with the Heavy Duty Outdoor Swivel

Bracket (PS-BK5). SPECIFICATION Model PS-5509 PIR Sensor 2 x Rectangular dual element low noise

high sensitivity pyroelectric PIR Sensitivity Adjustable in 10 stepa Processor Microprocessor controlled digital auto pulse signal processing (2 levels) Signature Analysis Energy, peak, duration, width & shape Lens Second generation Fresnel lens Sunlight/Strong Light Filter Built-in white light filter Installation Height 2.1m Zones (11+9+5+5+3) 2 Temperature Compensation Auto Digital Alarm Period 3 seconds Alarm Contact N.C., 0.15A/28V DC (Optional N.O.) Alarm Indication Red LED light for 3 seconds Tamper Switch N.C., 0.15A/28V DC Warm-up Time 6 seconds Detection Speed 0.2-3.5 m/seconds Coverage Distance 12m x 1100 Pet Immunity 40 kg RFI Immunity Greater than 10V/M, DC to 1GHz Weatherproof IP45 Power Supply 9-16V DC, 30mA Operating Temperature -200 C to 700C Humidity 95% Dimension WxHxD 95x168x65mm Weight 130g

Optional Mountingbracket

Optional Lens For Infrared Detector The following lenses are suitable for PS-3301,PS-3302 and PS-6601 motion detector. The range for different detector may be different.

PS-CUR curtain lens

PS-PET pet immunity lens

PS-LR1 long range lens

PS-BK3 Swivel Mount Bracket PS-BK3 Swivel Mount Bracket enables you to mount and orient a motion detector vertically or horizontally, on a ceiling or wall surface (flat/corner mount) ensuring optimal coverage of the protected area. It is suitable for POSONIC PS-3301, PS-3302, PS-DG3372 and PS-6601.

Installation:

PS-372 Digital Glassbreak Detector

The PS-372 is an electronic device using advanced digital technology. It employs an 8 bit microprocessor to perform constant analysis of the glass environment it is protecting. The PS-372 hears the unique multi frequency acoustic shock wave of glass-breaking; then it analyses the signal digitally by a microprocessor and decides whether it is the sounds of an actual glass break event or not. The micro algorithm identifies multiple variations of the glass break signal data in both unique time and frequency domains. In short; it compares the sound it hears with the wave shape of actual breaking glass in the memory database and ignores extraneous noises. Since the detector analyses wave shape but not amplitude, it will detect through curtains, drapes, blinds and sun tinting applications. Thus PS-372 is not crippled by post installation changes such as curtains or laminated window application.

Specification

Model PS-372 Digital Processor 8 bits 8MHz microprocessor Sensitivity Adjust Continuously adjustable by variable resistor Coverage 8m distance Mounting Ceiling or wall mounted, near to or opposite

to the glass Interference Rejection RFI/EMI filtering with SMD technology Window Size Any type and size of glass window Alarm Indication Red LED constant light 3 seconds LED Indication Yellow LED light: test mode

Green LED lights: normal Red LED lights: alarm

Test Mode Push button to enter test mode, exit test mode after 5 minutes automatically

Testing Method Using PS-373 glass-break simulator Alarm Output N.C. and N.O., 30Vdc 1A Alarm Memory Latch Selectable, red LED will light up constantly

after alarmed Anti-Tamper Switch N.C., opens when cover removed, 0.15A

28Vdc Power Input 11.516Vdc, 24mA Operating Temperature 10~50 Operating Humidity 95% Weight 100g Size 51x99x20mm (WxHxD)

PS-971 Digital Shock Detector FFEEAATTUURREESS PS-971 is a unique patented digital shock detector that combines high stability photo semiconductor vibration sensor with advanced microprocessor unit. The vibration signal it receives within a period will be analyzed and compared with the database in order to determine whether it is an alarm signal. In addition, the sensitivity can be set continuously in order to get a balance point correctly. This provides the user with exceptional all round performance and unrivalled operational features and reliability.

SPECIFICATION

Sensor Photo semiconductor shock sensor Processor Microprocessor controlled Alarm Relay Output Normally closed contact, opens on alarm Alarm Relay Rating 100mA 12V, 30 ohm resistor in series Sensitivity Setting Manual setting: by rotary VR setting continuously Warm Up Time Immediately Anti False Alarm Pulse Count 3 seconds Tamper Switch Normally closed, open upon lid removal Tamper Rating 100mA at DC12V Indication Red LED indicating Alarm Alarm Duration 2 seconds Supply Voltage DC8-15V Normal Current 11mA at DC12V Alarm Current 17mA at DC12V Operating Temperature -20 to 500C Casing Fire resistance white PVC Dimension (WxHxD) 26x85x24mm Net Weight/Shipping Weight 52g/70g

Model PS-971

LS-200 Shock Sensor

Features z LS-200 shock sensor has remarkable power and sensitivity to distinguish between forces such as cutting,

drilling, prying and forcing and the harmless low-frequency vibrations of wind or rocking movements. z The contact is 24K gold plated preventing from oxide. z Four level of sensitivity adjustment.

Specification Model LS-200 Alarm Output Normal closed, opens on alarm Contact 24K gold plated Sensitivity Setting 4 levels (level 1-the highest; level 4-the lowest) Operating Temperature -20 to 50 C Case color White or brown plastic Case material BS Dimension 49x28x23 mm Weight 20g

PS-850 Roll Up Shutter Contact

FFEEAATTUURREESS PS-850 is a unique patented magnetic switch for protection of roll up shutter. The switch is located between the shutter and the wall while the soft magnet plate is attached on the surface of shutter. Normally the magnet plate is positioned in front of the magnetic switch when the shutter is fully rolled down and closes the door. As the shutter is rolling up, the magnetic plate go far away from the switch thus triggers an alarm.

Installation position:

SSPPEECCIIFFIICCAATTIIOONN Model PS-850 Installation Location

The magnet plate is fixed on surface of roller shutter with screws, the magnet switch is fixed on wall or under ceiling

Effective Detection Distance 90mm Alarm Output Normal Close Rating Current 0.2A 30VDC, resistance loading Detector System Magnetic modulation Switch Position Up/Down 40mm adjustable Cable length 150mm Casing Ivory PVC Mounting Bracket Stainless steel Dimension WxDxH 32x80x128mm Weight 123 g

PS-810 Ionize Smoke Detector

FFEEAATTUURREESS This is an unique patented smoke detector which combines high stability detection with an advanced signal processing system. It can detect smoke promptly and correctly. When the smoke concentration in the area exceeds the limited, it will sound and flash to indicate an alarm and a relay signal will be sent to the control panel. SMT design Fire resistant casing Use highly stable sensor and advanced signal processing technology

SPECIFICATION Model PS-810 Sensor type Ionize Smoke Senso Processor Microchip controller Sensitivity Conform to UL 217, 4% per foot Alarm Relay Output Form A, normal closed, opens on alarm (3 seconds), can be set

to normal opened Alarm Relay Rating 1A at DC30V Buzzer Sounded during alarm, 85dB at 1 mete Reset after alarm Auto reset Supply Voltage DC12V Standby Current 3mA Alarm Current 30mA Warm Up Time(max) 60 seconds LED Indication Lamp Flash once every minute under normal condition, light up under

alarm condition Operating Temperature 0 to 700C Casing Fire resistance PC Dimension (x H) 100 x 35mm with detach-able cable termination base Weight 130 g

PS-820 Gas Detector

FFEEAATTUURREESS This is an unique patented gas detector which combines high stability detection with an advanced signal processing system. It can detect natural gas and propane gas promptly and correctly. When the gas concentration in the area exceeds the limited, it will sound and flash to indicate an alarm and a relay signal will be sent to the control panel. Fire resistant casing Use highly stable sensor and advanced signal processing technology

SPECIFICATION

Alarm Relay Output Form A, normal closed, opens on alarm (3 seconds), can be set to normal opened by jumper

Alarm Relay Rating 1A at DC30V Buzzer Sounded when alarmed, 85 dB at one meter Alarm Reset Auto reset Supply Voltage DC12V Standby Current 130mA Alarm Current 165mA Warm Up Time(max) 5 minutes LED indication Light up when alarmed Operating Temperature -20 to 500C Casing Fire resistant PC Dimension (x H) 100 x 48mm with detach-able cable termination base Weight 130 g

Model PS-820 Sensor type SnO2 Semi-conductor Natural Gas and Propane Gas Sensor Processor Microchip controller Temperature Compensation

Auto Temperature Compensation

Alarm Concentration (0.1-0.5)% (1,000-5,000ppm)

PS-830 Heat Detector

FFEEAATTUURREESS This is an unique patented heat detector which combines high stability detection with an advanced signal processing system. It can detect temperature promptly and correctly. When the temperature in the area exceeds the limited, it will sound and flash to indicate an alarm and a relay signal will be sent to the control panel. SMT design Fire resistant casing Use highly stable sensor and advanced signal processing technology

SPECIFICATION Model PS-830 Sensor Semi-conductive heat sensor Triggered Temperature 570C Processing Microchip controlled Alarm relay output Form A, normal closed contact, opened for 3 second when alarm, can be set

to normal opened Relay contact 1A , DC30V Buzzer Sounded when alarm occurs, 85 dB at one meter Alarm Reset Auto reset Power Source DC12V Standby Current 100uA Alarm Current 10-30mA Warm Up Time(max) 60 seconds Operating Temperature 0 to 700C Casing Fire resistant PC Dimension 100 x 48mm with detachable connection base Net Weight/Shipping Weight 187g/204g

PS-840 Smoke Heat Detector

FFEEAATTUURREESS This is an unique patented heat detector which combines high stability detection with an advanced signal processing system. It can detect smoke and temperature promptly and correctly. When the smoke concentration or the temperature in the area exceeds the limited, it will sound and flash to indicate an alarm and a relay signal will be sent to the control panel. SMT design Fire resistant casing Use highly stable sensor and advanced signal processing technology

SPECIFICATION Model PS-840 Smoke Sensor Ionize smoke sensor Heat Sensor Semi-conductive heat sensor Smoke Sensitivity Conform to UL 217, 4% per foot Triggered Temperature 570C Processing Microchip controlled Alarm relay output Form A, normal closed contact, opened for 3 second when alarm, can be set to

normal opened Relay contact 1A , DC30V Buzzer Sounded when alarm occurs, 85 dB at one meter Alarm Reset Auto reset Power Source DC12V Standby Current 4mA Alarm Current 50mA Warm Up Time(max) 60 seconds Operating Temperature 0 to 700C Casing Fire resistant PC Dimension 100 x 35mm with detachable connection base Weight 150 g

PS-860 Carbon Monoxide Detector

FFEEAATTUURREESS This is unique patented Carbon Monoxide detector which combines high stability detection with an advanced signal processing system. This provides the user with exceptional all round performance and unrivalled operational features and reliability. SPECIFICATION Model PS-860 Sensor type SnO2 Semi-conductive CO sensor Processor Microchip controller Alarm Concentration Alarmed within 90 minutes under concentration of 100ppm

Alarmed within 35 minutes under concentration of 200ppm Alarmed within 15 minutes under concentration of 400ppm

Buzzer Level Sounded when alarmed,1dB at one meter Alarm Relay Output

Form A, normal closed contact, opened for 3 seconds when alarmed, can be set to normal opened by jumper

Alarm Relay Contact 1A ,DC30V Reset after alarm Auto reset Supply Voltage DC12V Standby Current 100 A Alarm Current 50mA Operating Temperature -10 to 500C Casing White plastic Dimension 100 x 45mm with base Weight 130 g

PS-825 Wall Mounted Natural Gas Detector

FFEEAATTUURREESS This is an unique patented natural gas detector which combines high stability detection with an advanced signal processing system. It can detect natural gas promptly and correctly. When the gas concentration in the area exceeds the limited, it will sound and flash to indicate an alarm and a relay signal will be sent to the control panel. So it can be standalone operation or connected to panel. Fire resistant casing Use highly stable sensor and advanced signal processing

technology

SPECIFICATION

Alarm Relay Output Form A, normal closed, opens on alarm (3 seconds), can be set to normal opened by jumper

Alarm Relay Rating 1A at DC30V Buzzer Sounded when alarmed, 85 dB at one meter Alarm Reset Auto reset Supply Voltage DC12V on board terminal input or power adaptor jack input. An adaptor suitable

for AC110-220V mains supply included. Standby Current DC 130mA Alarm Current DC 165mA Warm Up Time(max) 5 minutes LED indication 1. Green LED lights up when power supply is ON.

2. Red LED light up when alarmed Test Button One test button is provided for testing of function Mounting Wall mounted Operating Temperature -20 to 500C Casing Fire resistant ABS Dimension 85 x 119 x 49mm Net Weight/Shipping Weight 135g/193g

Model PS-825 Sensor type SnO2 Semi-conductor Natural Gas Sensor Processor Microchip controller Temperature Compensation

Auto Temperature Compensation

Alarm Concentration (0.1-0.5)% (1,000-5,000ppm)

PS-826 Wall Mounted Propane Gas Detector

FFEEAATTUURREESS This is an unique patented propane gas detector which combines high stability detection with an advanced signal processing system. It can detect propane gas promptly and correctly. When the gas concentration in the area exceeds the limited, it will sound and flash to indicate an alarm and a relay signal will be sent to the control panel. So it can be standalone operation or connected to panel. Fire resistant casing Use highly stable sensor and advanced signal processing

technology

SPECIFICATION

Alarm Relay Output Form A, normal closed, opens on alarm (3 seconds), can be set to normal opened by jumper

Alarm Relay Rating 1A at DC30V Buzzer Sounded when alarmed, 85 dB at one meter Alarm Reset Auto reset Supply Voltage DC12V on board terminal input or power adaptor jack input. An adaptor

suitable for AC110-220V mains supply included. Standby Current 130mA Alarm Current 165mA Warm Up Time(max) 5 minutes LED indication 1. Green LED lights up when power supply is ON.

2. Red LED light up when alarmed Test Button One test button is provided for testing of function Mounting Wall mounted Operating Temperature -20 to 500C Casing Fire resistant ABS Dimension 85 x 119 x 49mm Net Weight/Shipping Weight 135g/193g

Model PS-826 Sensor type SnO2 Semi-conductor Propane Gas Sensor Processor Microchip controller Temperature compensation Auto Temperature Compensation Alarm Concentration (0.1-0.5)% (1,000-5,000ppm)

PS-815 Standalone Photoelectric Smoke Detector

Operation Theory Once battery is conducted, detector will start normal operation after 25 seconds internal charge. When smoke density exceed preset standard during pre-fire period, the refraction phenomenon will caused by scattering light between receiver and transmitter inside the smoke chamber. Then alarm is activated. The buzzer and lamp are triggered, which are pre-fire warning.

Features Easy installation - Install directly to proper location without any wiring. Longer battery life - Minimum one year under standby operation. With metal net to prevent insects causing false alarm Using microprocessor and SMT technology, low profile design, low power consumption, high precision and

stability. Low battery warning- Beeps every 20 seconds for at least 7 days to indicate low voltage of battery. Also, it

extends the beeping period for 4 minutes after alarm activation. Simple test method- Pressing test button for 2 seconds and it will beep to confirm the unit is under normal

condition.

Specification

Model PS-815 Sensor Type Photoelectric smoke chamber Processor Microchip controller Sensitivity Conform to UL 217, 4% per foot, EN54, CNS Alarm Within 30 second for 7.5% Buzzer Sounded during alarm, 85dB at 3 meter LED Indication Lamp Flashes once every 40 seconds under normal condition, flashes and

beeps under alarm condition, flashes every 20 seconds and beeps when battery abnormal

Reset after alarm Auto reset Supply Voltage 9V battery (built-in) Battery Protection Cover can not be fixed if battery not installed Standby Current 12A Alarm Current 8mA Warm Up Time(max) 25 seconds Covering Area 150 square meter for mounting height below 4m, 75 square meter for

mounting height 4-20m Mounting Ceiling or wall mounted Operating Temperature -10 to 550C Casing White fire resistance PC Standard CE Dimension 120 x 37mm with detach-able fixing base Net Weight/Shipping Weight 200g/217g

PS-PB30HD,PB60HD,PB80HD,PB120HD Outdoor Dual Beam Infrared Detector with laser beam

FFEEAATTUURREESS QQuuiicckk,,eeaassyy iinnssttaallllaattiioonn wwiitthh bbuuiilltt--iinn llaasseerr bbeeaamm

alignment system. Auto Gain Control Circuit Lightning and surge protection Anti-fog and anti-dew design

SPECIFICATION Model PS-PB30HD PS-PB60HD PS-PB80HD PS-PB120HD Coverage Distance 30m 60m 80m 120m Detection Method 2 beams simultaneous cut-off detection Transmitting Method Double modulation 1 KHz pulsed beam by IR LED Interrupt Time Adjustable from 50msec. to 700msec. Laser wavelength 650nm, Less than 5mW Power Input 10-30VDC non-polarity Operating Current Transmitter:30 mA Receiver:25mA Alarm Output 1 x Normal Close , 1 x Normal Open Contact , 30VDC, 1A,

1 second Tamper Normal Close Contact for both transmitter and receiver 1A Connection By screw terminals LED Indication Receiver: red indicates transmitter and receiver are not aligned or when beam

is broken. , yellow indicates signal is weak Green indicates normal

Beam Align Angle Vertical 150 , horizontal 900 Operating Temperature -25 to 550 C Mounting On wall or pole, stainless steel pole brackets and screws included Case Cover PC resin, Base ABS resin Waterproof IP55 Dimension WxHxD 70x120x35mm Weight per set 1.1kg

PS-10MA Mini Outdoor Single Beam Infrared Detector

FFEEAATTUURREESS 1. Solid state circuit 2. Durable housing 3. Minimum false alarm 4. Suitable for window, balcony

and corridor

SPECIFICATION Model PS-10MA Beam Single beam Coverage Distance Outdoor 10m, indoor 20m Detection Method Beam cut-off detection Transmitting Method Double modulation 1 KHz pulsed beam by IR LED Interrupt Time 100 m second Power Input 12-24VDC Operating Current Transmitter: 20mA Receiver: 25 mA Alarm Output Normal Close and normal open Contact, capacity 120VAC, 1AAlarm Duration 2 seconds LED Indication Transmitter: Green ON

Receiver: Red OFF when beam broken Tamper Normal Close Contact for both transmitter and receiver White Light Protection Sunlight: 30,000 lux

Lamplight: 10,000 lux Operating Temperature -20 to 700 C Mounting On wall Case Black or White PC resin Waterproof IP66 Weight per set 130g Dimension WxHxD 46x95x34mm Dimension WxHxD 46x95x34mm

PS-415 4 CHANNEL WIRELESS RECEIVER

The PS-415 Wireless Receiver is an interface unit between the wireless detectors and wired alarm panel. It can receive signal of POSONIC wireless detectors or accessories and re-send to any wired control pa