VE500ASSmall and compact, with outstanding features

Portable Fire Pump

Advanced engine technology for any tough environment Newly adopted Electronic Fuel Injection System brings many benefits to an operator. Smoother and consistent transient throttle response, easier starting in cold conditions and highlands area, more accurate adjustment to account for extremes of ambient temperatures and changes in air pressure, more stable idling and no engine stalling, and no carburetor related issues.

1

Special surface treatment to deliver a robust and durable equipmentThe pump unit installed on this model are applied with special surface treatment. This treatment contributes to extending the purpose of use and prolonging the working life. It allows you to use this pump not only for fire fighting purposes but also for drainage purposes in a flooded area.

2

Small and compact design philosophyThe dry weight of this model is less than 50kg, and it's the lightest weight in its class (Electronic Fuel Injection type). In order to improve usability, we install 4 storable carry handles on the frame. They allow you to carry anywhere.

3

3.7 sec

7.0 sec

15.4 sec

1 m3 m6 m

Priming Performance

at suction height

at suction height

at suction height

525 Lit/min at 0.6MPa (6 Bar)

250 Lit/min at 0.8MPa (8 Bar)

Performance at Suction Height 3m

SPECIFICATION

2 strokeAir cooled1 cylinder198 cc (12.0 cu. In)8.6 kW (11.7 PS)5.95 Lit5.4 Lit / HrElectric and manualAuto mixingElectronic fuel injection12V-14Ah/10h12V-35W4 blade rotary-vane vacuum pump (Oilless-type)ManualSingle suction, single stage, high pressure turbine pump**JIS 2-1/2" (65mm) male**JIS 2-1/2" (65mm) maleSingleBall valve

6m3m1m

0.8 MPa (8 bar)0.6 MPa (6 bar)

15,4 sec7.0 sec3.7 sec

250 LPM525 LPM

TypeCooling systemNumber of cylinderDisplacementAuthorized outputFuel tank capacity*Fuel consumptionStarting systemLubricationFuel feed systemBatteryFloodlight bulbVacuum pumpPriming systemPump typeSuction thread and dia.Discharge thread and dia.Discharge numberDischarge valve

TOHATSU CORPORATION 5-4, 3-chome, Azusawa, Itabashi-ku, Tokyo 174-0051 Japan Tel: 81-3-3966-3117 Fax: 81-3-3966-0090 www.tohatsu.com

Note : *At 525 LPM @ 0.6 Mpa (6 bar) **JIS : Japanese Industrial Standard Thread

PERFORMANCE CURVE

Suction hose dia : 2-1/2”Suction hose length : 6mSuction height : Hs=3m

USG/min 50 100 150

m3/min 0.20.3

0.4

0.5

0.6

0.7

0.8

0.9

PSI

Mpa

120

100

80

60

0.3 0.4 0.5 0.6

Discharge performance(Suction height : 3m)

Priming performance(Suction height at)

Maximum suction height

Engine

Suction

Pump

Weight

Dimension

Pump performanceApprox. 9m

Dry weightOperative weightOverall Length x Width x Height

49 kg 55 kg 575 x 475 x 537 mm