www.tecorp.in

Pole Line Hardware

Conductor Fittings

Cable Accessories

1

TRAN

SMIS

SION

EQU

IPM

ENT

CORP

ORAT

ION

TRAN

SMIS

SION

EQUI

PMEN

TCO

RPOR

ATIO

N

TEC was established in 1975, as a manufacturing unit specializing in the supply of electrical fittings for use by the Power Utility Companies. TEC has since evolved as India’s leading manufacturer and exporter of products relative to:

• Pole Line Hardware• Conductor Fittings• Cable Accessories

Over the years, TEC has established its name and trust with customers from all over the world, especially in the EU (European Union), by developing new products through customization, research and co-operation with its esteemed customers. Accredited to ISO-9001:2008 by BSI Management Systems U.K., TEC has a fully equipped, modern manufacturing unit, utilizing the latest technology and machin-ery, thus enabling constant improvement in the quality of its products and at the same time keeping in mind its cost effectiveness.

TEC products are manufactured strictly in accordance with the specifications and designs laid down by accepted International Standards Institutes and, as such, have total control over the quality of its products right from the raw material to the finished item. Rigorous testing is a key element of our quality control which has given our quality conscious customers confidence in our supply.

ABOUT THE COMPANY

2

TEC products are globally well accepted in emerging and matured markets with a large percentage of its products being sold within the EU.

Our products are being successfully supplied to the following countries.

GLOBAL PRESENCE

IndiaNepal

Bangladesh

Thailand

Malaysia

Mauritius

United Kingdom

Ireland BelgiumGermanyFrance

SpainItaly

Malta GreeceCyprus

Singapore

3

POLE LINE HARDWAREPRODUCT PORTFOLIO

POLE LINE HARDWARE

4

BENT BOLTMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461

CLEVIS ACCESSORIESMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461

D IRON Material Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461

EAVES EXTENSION BRACKETSMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461

5

CROSSARMSMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461

INSULATOR BRACKETMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461

FACADE WALL BRACKETMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461

HOOKSMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461

6

Hook Screw

Hook Screw Nut Type

J Hook

Pole Hook / J Bolt

INSULATOR STRAPMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461

PIPE / POLE CLAMPMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461

POLE CLAMPMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461Fasteners Mild Steel or High Tensile Steel

LARGE SHACKLE STRAP FOR STEEL POLEMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461

7

M F F Ankerschelle

LINKMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461

SAG ADJUSTMENT PLATEMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461

8

Flat Link

Twisted Link

Cranked Link

Quad Zebra Drop Link

Parellel Conversion Link

Cranked Link Assembly

STAY RODSMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461

STRAINING SCREWMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461

9

Bow Type

Loop Type

Tubular Type

Eye - Eye

Eye - Hook

TOWING PLATESMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461

TIE BARMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461

STRAPSMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461

10

Tie Straps

Shackle Straps

YOKE PLATESMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461

U CLEVISMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461

U BOLTMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461

11

12

WALL BRACKETSMaterial Mild Steel as per BS 4360; Grade 43AFinish Hot Dip Galvanised as per BS EN ISO 1461

BR

13

CONDUCTOR FITTINGSPRODUCT PORTFOLIO

CONDUCTOR FITTINGS

14

ANCHOR CLAMPMaterial En 3A SteelTube High Conductivity Aluminum with Min. 99.5% purityFinish Hot Dip Galvanised as per BS EN ISO 1461

COPPER C CONNECTORMaterial High Conductivity Copper with Minimum 99.5 % purityFinish Neutral or Electro Tin Plated

ALUMINIUM / COPPER LOOPS / STIRRUPSMaterial High Conductivity Aluminium / Copper with Minimum 99.5 % purityFinish Electro Tin Plated / Bare

AL SADDLE TAPS / V LINE CONNECTORSMaterial Al AlloyFinish Neutral

Clevis Fitting Only

Clevis Type

Aluminium

Aluminium

Copper

Copper

15

CRIMP CONNECTORSMaterial High Conductivity Aluminium with Minimum 99.5 % purityFinish Neutral

Copper

Brass

DC TAPE CLIPS OR SPACER CLAMPSMaterial Brass and Copper with Minimum 99.5% PurityFinish Neutral or Tin / Bright Nickel PlatedFasteners Mild Steel; Zinc Plated / Bright Nickel Plated

HOT LINE CLAMPSMaterial Die Casted Al Alloy / Stamped / ForgedFinish Mild Steel; Zinc Plated / Bright Nickel Plated

Aluminium Conductors

Copper ConductorsRIGHT ANGLE CONNECTORS

Material High Conductivity Aluminium with Minimum 99.5 % purityFinish NeutralFasteners Mild Steel; Zinc Plated / Bright Nickel Plated

16

INSULATING SHROUDSMaterial Thermoplastic / PPColour Black / Cream / Red / Blue / Green

Al saddle taps/Vline connectors

Red BlueBlack Cream Green

Brass

Copper

MECHANICAL BUS BAR CLAMPSMaterial Brass and Copper with Minimum 99.5% PurityFinish Neutral or Tin / Bright Nickel PlatedFasteners Mild Steel; Zinc Plated / Bright Nickel Plated

SPILT BOLT BRASS LINE CONNECTORSMaterial Brass / Copper / AluminiumFinish Neutral or Electro Tin Plated for Copper PartsFasteners Neutral / Electro Tin Plated / Bright Nickel Plated

AluminiumCopper

Brass

17

P. G. CLAMPSMaterial High Conductivity Aluminium / Copper with Minimum 99.5% purityFinish Neutral or Electro Tin Plated for Copper PartsFasteners Mild Steel; Zinc Plated / Bright Nickel Plated / Hot Dip Galvanised

SUSPENSION CLAMPSMaterial Die Casted Al AlloyFinish NeutralFasteners Mild Steel or High Tensile Steel; Hot Dip Galvanised

18

TAILOR MADE CONNECTORS AND TERMINALSMaterial High Conductivity Aluminium / Copper with Minimum 99.5%Finish Neutral or Electro Tin Plated for Copper PartsFasteners Mild Steel; Zinc Plated / Bright Nickel Plated

Aluminium

Copper

TENSION CLAMPSMaterial Die Casted Al AlloyFinish NeutralFinish Mild Steel or High Tensile Steel; Hot Dip Galvanised

TENSION JOINTS FOR ROBIN / SWAN / OXLIP / POPPY / RACOON CONDUCTORSMaterial High Conductivity Aluminium / Copper with Min. 99.5% PurityFinish Neutral

19

BAKELITE SHROUDSMaterial Thermosetting Bakelite as per IS 1300 Grade 2Finish Neutral / Black / Cream

20

TINSEL STOCKINGMaterial High Conductivity Aluminium / Copper with Minimum 99.5% purityFinish Neutral or Electro Tin Plated

WORM DRIVE CLIPS / JUBILEE CLIPSMaterial Stainless Steel / Mild steelFinish Neutral / Zinc Plated

COPPER WIREMaterial High Conductivity Aluminium / Copper with Minimum 99.5% purityFinish Neutral or Electro Tin Plated

COPPER BRAIDS (WITH SOLDER BLOCK)Material High Conductivity Aluminium / Copper with Minimum 99.5% purityFinish Neutral or Electro Tin Plated

STEEL COLLETSMaterial Mild Steel as per BS 4360 ; Grade 43AFinish Zinc Plated/hot Dip Galvanised as per BS EN ISO 1461

HEAT SHRINKABLE CABLE TERMINATIONS HARDWARE

21

CABLE ACCESSORIESPRODUCT PORTFOLIO

CABLE ACCESSORIES

22

ALUMINIUM / COPPER STRAIGHT CONNECTORSMaterial High Conductivity Aluminium / Copper with Min. 99.5% PurityFinish Neutral

COMPRESSION TYPE ALUMINIUM LUGSMaterial High Conductivity Aluminium with Min. 99.5% PurityFinish Neutral

ALUMINIUM SCREW LUGSMaterial High Conductivity Aluminium with Min. 99.5% PurityFinish Neutral

Sector Shaped Cables Solid Conductor

Sector Shaped Solid Cables

Sector Shaped Connector

Straight Connector

Straight Connector with Tapered Edges

23

ALUMINIUM PIN CONNECTORSMaterial High Conductivity Aluminium with Min. 99.5% PurityFinish Neutral

COPPER TERMINALSMaterial High Conductivity Copper with Min. 99.5% PurityFinish Neutral / Electro Tin Plated

BI-METAL FITTINGSMaterial High Conductivity Copper / Aluminium with Min. 99.5% PurityFinish Neutral Sector Shaped Cables Solid Conductor

Billets

Straight Ferrules

Straight Connectors

Sector Shaped Ferrules

Long Barrel Lugs

Short Barrel Lugs Sector Shaped Lugs

Sector Shaped Solid Cables

Belly Bulge Terminal

Regular Type

Weak Back Terminal

24

Right Angle Terminals

Terminals with Inspection Holes

ALUMINIUM TERMINALMaterial High Conductivity Aluminium with Min. 99.5% PurityFinish Electro Tin Plated/ Bare

Regular Type

Belly Bulge Type

Adjustable Trefoil Cleats

CHANNEL NUTSMaterial Mild Steel / High Tensile SteelFinish Zinc Plated / Bright Nickel Plated

Trefoil Cleatswith double hole fixing

Channel Nuts

Trefoil Cleatswith single hole fixing

Claw Cleats

CABLE CLEATS / CLAMPSMaterial Die Casted Al AlloyFinish NeutralFasteners Mild Steel or High Tensile Steel; Hot Dip Galvanised / Zinc Plated / Bright Nickel Plated

Cleats with double hole fixing

Transmission Equipment CorporationFE - 96, Sector - 3

Salt Lake, Kolkata - 700 106, India.Tele - Fax: ++91 33 2334 3645

email: gautam@tecorp.in

This catalogue is issued to provide outline information only and is not deemed to form part of an offer or contract. With the policy of continuous development, TEC reserves the right to change details without prior notice.

A Te

chno

Vis

ion,

Cal

cutta

, Ind

ia P

rodu

ct