8/16/2019 Plevnik brew
1/2In the process of constant improvements we reserve the right
to make technical and aesthetic modifications without prior notice.
05.11.2015-BK-LT
Representative:
www.plevnik.si, [email protected]
Tel.: 00386 / (0)1 200 60 80
Podsmreka 56, 1356 Dobrova, Slovenija
PLEVNIK engineering and production d.o.o.
BK - Brewing KettleBASIC EQUIPMENT: Vertical insulted
cylindrical vessel Made of stainless steel (AISI 304) One-part
cover (with service hole) with a spring-hinge for an easier lifting
of
the cover Pressure in the exchanger: max. 4 bar Water
circulation pump for the circulation of heating water, expansion
vessel,
safety valve, manometer (without heat exchanger for cooling on
sizes 500l to1500l)
Heating with , from external source or aelectrical heaters hot
watercombination of both
Stable support with mechanism for the inclination of the kettle
to the outflow(BK 100-300) or inclined bottom against the outflow
(BK 500-1500)
Outflow (up to 300l , over 400l ) with a butterfly valveDN50
DN65
Special stirrer with 40 rpm Control panel with a GPC 145
processor for the ofautomatic regulation
hetaing (possible of setting 6 temperatures of heating and 5
duration times)
OPTIONAL EQUIPMENT: Support on wheels Stirrer speed regulation
Whirlpool module Stronger heating elements Working platform Bigger
outflow (DN65, Dn80) Controller Mc1 Module for choosing the power
of heating - 2 levels (EL and EW type)
Type Total
volume (l)
Dimensions (mm)Weight
(kg)
Heatingpower
(kW)
D H C B E EL
BK 100 110 Ø 750 930 520 860 1350 125 9
BK 200 220 Ø 850 1010 475 980 1380 195 18
BK 300 325 Ø 1000 1010 475 1150 1450 230 20 (24)
BK 500 540 Ø 1130 1030 330 1270 1450 310 30 (36)
BK 650 700 Ø 1280 1010 330 1430 1500 360 36 (45)
BK 1000 1080 Ø 1540 1030 330 1750 1600 490 45 (60)
BK 1500 1620 Ø 1550 1350 330 1750 1750 / 60 (90)
Brewing Kettle
Simple to Advanced Brewing
Legend: EL - Electrical heating
Just like the „big ones“
8/16/2019 Plevnik brew
2/2
www.plevnik.si, [email protected]
Tel.: 00386 / (0)1 200 60 80
Podsmreka 56, 1356 Dobrova, Slovenija
PLEVNIK engineering and production d.o.o.Representative:
05.11.2015-BK-LTIn the process of constant improvements we
reserve the right to make technical and aesthetic modifications
without prior notice.
Lauter Tank
Simple to Advanced Brewing
Type
Dimensions
ΦD outside H
LT 100 620 1050
LT 200 760 1100
LT 300 1000 1100
LT 500 1100 880
LT 650 1280 880
LT 1000 1550 900
LT 1500 1550 1250
BASIC EQUIPMENT: Vertical insulted cylindrical vessel on a
stable support with an
inclined bottom 2,5° against the outflow Made of stainless steel
(AISI 304) One-part cover (with service hole) with a spring-hinge
for an easier
lifting of the cover One-part / Two-part perforated filter plate
on the bottom (1,5 mm) DN 50 outflow with butterly valve Without
motoreducer, stirrer and control panel
OPTIONAL EQUIPMENT:
Side service door (300l and more)
LT - Lauter Tank
Just like the „big ones“
