1
HIGH SECURITY | GOVERNEMENT | LOCAL AUTHORITY | INDUSTRIAL | COMMERCIAL The LPS1175 Platinum Pedestrian Hinged Gate has withstood forcible attack to LPS1175 Security Rating 2 & 3. Available in a single leaf 750 to 1500mm. 3 Models: Manual, Semi-automatic and Fully Powered Manual Operation Wicket with optional Drop Bolt and Shoot Bolt Semi-Automatic Wicket with Hydraulic Closer and Locking Bolt Fully Powered Wicket with Gate Back Actuator and Locking Bolt Fully Welded Construction LPS1175 SR2 & SR3 rated bar and mesh infill Bespoke Manufacturing Certification number 1059b/03 Platinum Pedestrian Gates LPCB LPS1175 Issue 7.3 Security Rating 2&3 Platinum Gates SR2 & SR3 Approved to LPS1175 Issue 7 Security Rating 2 & 3 Cert/LPCB Ref: 1059b/03 Models Manual Operation Wicket with optional Drop Bolt and Shoot Bolt Semi-Automatic Wicket with Hydraulic Closer and Locking Bolt Fully Powered Wicket with Gate Back Actuator and Locking Bolt Heights SR2 Standard height: 2400mm Min Height: 2100mm Max height: 3000mm SR3 Standard height: 2400mm Min Height: 2400mm Max height: 3000mm Benefits & Features As a vehicle security gate should not be used by pedestrians for health and safety reasons, Frontier Pitts recommends a separate access point in the form of a pedestrian gate or turnstile adjacent to the vehicle gate within the fence line. The manual ‘Wicket’ gates security can be increased to a Semi-Automatic Wicket with a hydraulic closer and locking bolt. With this option, a wide range of access control systems are available. The Powered Wicket Pedestrian Gate is a fully automated swing gate with Gate Back Actuator and locking bolt. With this option, a wide range of access control systems are available. Civil Requirements L: (Aperture + 300) x W: 500 x D: 400 (millimetres) Note: Power and control wiring ducts to be incorporated into foundations Electrical Requirements ** For Semi-Automatic and Fully Powered Wicket Gate Options: 6 amp, 3 wire, 230V, 50Hz, single phase supply * Depending on configuration ** This is subject to a risk assessment to ensure the automatic equipment complies to BS EN 12453

Platinum Pedestrian Gates - Frontier Pitts

  • Upload
    others

  • View
    3

  • Download
    0

Embed Size (px)

Citation preview

HigH Security | governement | LocaL autHority | induStriaL | commerciaL

The LPS1175 Platinum Pedestrian Hinged Gate has withstood forcible attack to LPS1175 Security rating 2 & 3. Available in a single leaf 750 to 1500mm.

• 3 Models: manual, Semi-automatic and Fully Powered

• Manual Operation Wicket with optional Drop Bolt and Shoot Bolt• Semi-Automatic Wicket with Hydraulic Closer and Locking Bolt• Fully Powered Wicket with Gate Back Actuator and Locking Bolt

• Fully Welded Construction• LPS1175 SR2 & SR3 rated bar and mesh infill• Bespoke Manufacturing• Certification number 1059b/03

Platinum Pedestrian Gates

LPcB LPS1175 issue 7.3 Security rating 2&3

Platinum Gates SR2 & SR3Approved to LPS1175 Issue 7

Security Rating 2 & 3Cert/LPCB Ref: 1059b/03

models• manual operation Wicket with optional

Drop Bolt and Shoot Bolt• Semi-automatic Wicket with Hydraulic Closer

and Locking Bolt• Fully Powered Wicket with Gate Back Actuator

and Locking Bolt

Heights• Sr2

Standard height: 2400mmMin Height: 2100mmMax height: 3000mm

• Sr3Standard height: 2400mmMin Height: 2400mmMax height: 3000mm

Benefits & Features• As a vehicle security gate should not be used by

pedestrians for health and safety reasons, FrontierPitts recommends a separate access point in theform of a pedestrian gate or turnstile adjacent tothe vehicle gate within the fence line.

• The manual ‘Wicket’ gates security can beincreased to a Semi-Automatic Wicket with ahydraulic closer and locking bolt. With this option, awide range of access control systems are available.

• The Powered Wicket Pedestrian Gate is a fullyautomated swing gate with Gate Back Actuatorand locking bolt. With this option, a wide range ofaccess control systems are available.

civil requirementsL: (aperture + 300) x W: 500 x d: 400 (millimetres) note: Power and control wiring ducts to be incorporated

into foundationselectrical requirements **• For Semi-Automatic and Fully Powered Wicket

Gate Options: 6 amp, 3 wire, 230V, 50Hz, singlephase supply

* Depending on configuration** This is subject to a risk assessment to ensure the

automatic equipment complies to BS EN 12453