% 26 in. (660 mm) runway width

% 18,000-lb. (8165 kg) capacity

% “Walk-around” pit layout saves time spent raising and lowering lift

% Two available runway lengths: 223 and 255.5 in.

Pit RacksFor passenger cars and light trucks

WIDER RUNWAYS!

Copyright © 2017, Hunter Engineering CompanyForm 4802-T, 03/17

Supersedes form 4802-T, 10/15

0317FH

OPTIONAL

20-2076-1 – PowerSlide turnplates (standard on -IS models)

20-2532-1 – Stainless steel turnplate (pictured)

20-2533-1 – Low-friction stainless steel turnplates (standard on non-IS models)

STANDARD

Air Line KitProvides a convenient air source at the front and rear for jacks and air tools.

STANDARD

Swing Air Jack – 133-84-19,000-lb. (4082 kg) Capacity

OPTIONAL

Integrated Inflation Reels (-IS models)Automatically fills or bleeds each tire.

Specifications

Site Requirements*

For complete site requirements see 6114-T

For P451 blueprint, order 7019-T* When ordering, 36 in. deep work area is standard.

See blueprint for parts to order when selecting 24 in. or 30 in. work area.

.

CENTER PITWIDTH

38 in(965 mm)

TOTAL RUNWAY LENGTHP451:223 in.

(5664 mm)

P451L:255 1/2 in.(6490 mm)

INSIDE PITRECOMMENDED

MINIMUM183 in.

(4648 mm)

INSIDE PIT RECOMMENDED MINIMUMP451:

331 in. (8407 mm)P451L:

364 in. (9256 mm)

WALK AROUNDSTANDARD DEPTH

36 in. (914 mm)

OPTIONAL DEPTH30 in. (762 mm)

OR24 in. (610 mm)

CENTER PIT DEPTH30 in (762 mm)

OPTIONAL DEPTH33 in (838 mm)

CENTER PIT RECOMMENDED LENGTHP451:

227 in. (7063 mm)P451L:

310 in. (7874 mm)

CLRACKWIDTH92 in.

(2337 mm)

RUNWAY TOCENTER OFTURNPLATE

18 in.(457mm)

Model Runway length Includes...

P451JT 223 in. (5664 mm) Two 9,000-lb. (4082 kg) Swing Air Jacks and stainless steel turnplates

P451T-IS 223 in. (5664 mm) Two 9,000-lb. (4082 kg) Swing Air Jacks, Inflation Station and Powerslide® turnplates

P451LJT 255.5 in. (6489 mm) Two 9,000-lb. (4082 kg) Swing Air Jacks and stainless steel turnplates

P451LT-IS 255.5 in. (6489 mm) Two 9,000-lb. (4082 kg) Swing Air Jacks, Inflation Station and Powerslide® turnplates

All models have 50 mm turnplate pockets and 88-158 in. four-wheel alignment wheelbase.