4 "Walk-around" pit layout saves time spent raising and lowering lift

418,000-lb. (8165 kg) capacity and 22.5-in. (572 mm) runway width

4Two available runway lengths: 223- and 255-in.

Pit RacksFor Passenger Cars and Light Trucks

Form 4802-T, 01/15Supersedes form 4802-T, 09/10

0115DH

Copyright © 2015, Hunter Engineering Company

www.hunte r.com

Model Length Description

P441J 223 in. (5664 mm) Pit Rack with (2) 9,000-lb. (4082 kg) Swing Air Jacks

P441-IS 223 in. (5664 mm) Pit Rack with Inflation Station and (2) 9,000-lb. (4082 kg) Swing Air Jacks

P444J 255 in. (6477 mm) Pit Rack with (2) 9,000-lb. (4082 kg) Swing Air Jacks

P444-IS 255 in. (6477 mm) Pit Rack with Inflation Station and (2) 9,000-lb. (4082 kg) Swing Air Jacks

Specifications

Standard Optional

Site Requirements*

For complete site requirements see 6114-T

For P441 blueprint order 6120-T

For P444 blueprint order 6121-T

* When ordering, 36 in. deep work area is standard. See blueprint for parts to order when selecting 24 in. or 30 in. work area.

Stainless Steel Turnplate – 20-2532-1

20-2076-1 PowerSlide turnplates 20-2533-1 Low-friction stainless steel turnplates

183 in.(4648 mm)

Inside Pit Minimum Recommended

Center Pit63 in.- 66 in. Deep

(1600 mm-1676 mm)

WORK AREA

223 in. (5664 mm) or 255 in. (6477 mm)

85 in.(2159 mm)

40 in. (1016 mm)

331 in. (8407 mm) or 364 in. (9245 mm)

Inside Pit Minimum Recommended

Walk-around

36 in. Deep(914 mm)

or30 in. Deep(762 mm)

or24 in. Deep(610 mm)

*

Swing Air Jack – 133-84-19,000-lb. (4082 kg) Capacity

Air Line KitProvides a convenient air source at the front and rear for jacks and air tools.

Integrated Inflation Reels (-IS models)Automatically fills or bleeds each tire.

All models have 50 mm turnplate pockets and 4-wheel align WB 88 in. - 158 in.