Presentation ofPMI-107

Pipeline Maintenance International LLC (PMI)

Introduction

PMI-107 is a unique chemical product specifically

developed to deal with heavy paraffin waxes and

asphaltenes and mobilises heavy oils, in a simple

and cost-effective way.

The product is injected while the facility is

operational (no down-time) with visibly improved

performances of valves, instrumentation, pipeline

flow and plant efficiency within hours.

Cost Comparison using PMI-107FA

NEW PRODUCT BULLETIN PMI-107FA

THE WORLDS FIRST NON-TOXIC, ENVIRONMENTAL & MARINE FRIENDLY, HUMAN, ANIMAL SAFECOMBINATION TREATMENT, FOR THE FOLLOWING OIL/GAS FIELD PROBLEMS;

•Enhanced Oil Recovery (EOR) •Well bore/Perforation/Tube Cleaner

•H2S Eliminate at source

•Heavy Oil Mobiliser (DRA) •Improve flow/reduce pressures

•Wax Inhibitor (WI) •Asphaltene Inhibitor (AI)

•Corrosion/Scale Inhibitor (CI)

•Demulsifier/Emulsion Breaker (EB)

Eliminate the requirement for highly expensive equipment and exotic metals/steels. Reduce your chemical requirement To ONE PRODUCT!

PMI-107FA is equally effective Downhole – Pipeline – Production -Storage, Road, Rail, Marine Tanks, it will provide a full circle END to END solution for the Hydrocarbon Industry

Pipeline Maintenance International LLC T: +971 2 644 4557 M: +971 52 795 1548 E: info@hvwwg.com

REPLACEMENT FOR TRIAZINE, XYLENE & TOLUENE

PMI-107FA replaces the need to use

Xylene & Toluene (X&T) and Eliminates H2S

Xylene & Toluene

H2S

PMI-107FA

CARCINOGENIC VERY TOXIC BIO-HAZARD ENVIRO-HAZARD MARINE-HAZARD FLAMMABLE EXPLOSIVE

EXTREMELY POISONOUS FULL RANGE TOXICITY HIGHLY CORROSIVE CORROSION IN OIL & GAS DAMAGES OIL

NON-TOXIC ECO-FRIENDLY ENVIRONMENTALLY SAFE GREEN PRODUCT BIODEGRADABLE

Well stimulation Hot oil services

Services with PMI-107

Heavy Oil Pipeline Injection

Demulsifying

Equipment & Service

Pit Cleaning Plant Cleaning Tank Cleaning

• Paraffin and asphaltene wax formation

• Pipeline plugging or restrictions

• Corrosion of pipeline, tanks and equipment

• Wax build up in pipeline or plant facilities

• Scaling and emulsions

• Difficulties in removing H2S

• Excessive pressure, reduced volumes

• Low productivity

• Mobilising Heavy Oils

• High maintenance costs

Common problems

• PMI-107 is formed by using molecular chemistry to

make a positively charged or an anionic blended

compound.

• It has an affinity for any negative / ground, carbon

or stainless steel surface, where it is drawn to the

steel it forms a protective barrier film, (wetting out).

• The product works fast and efficiently with

noticeable results within 24 hours

What is PMI-107?

Features of PMI-107

• Single product – multi purpose anionic compound

• Corrosion control and prevention

• Paraffin / asphaltene control and prevention (incl. crystalline wax)

• Drag reducer

• Mobilises Heavy Oils

• Cleans pipe lines, pumps, valves and equipment

• Cleans tanks and facilities

• Chemical injection services

• Well stimulation and work over

• Emulsion control and breaking

• Reduces maintenance down time

• Extends the W.O.L. of assets

• Single product corrosion, wax inhibitor and D.R.A.

• Solution drops out into the water and is water soluble

• Environmentally friendly Biodegradable and safe to

administer

• Effective for onshore/offshore operations

• Cost effective

• Reduce overall costs of chemical program

Benefits of using PMI-107

• Pipeline / Tank dimensions

• Product being transported / Stored

• Flow rates

• Gas and oil analysis

• Facility size

• Availability of injection points, pumps

• Services available: power, water, workforce camp

• Brief history of identified problems

• Specifications of equipment related to problem

Data Capture Requirements

for applying PMI-107

Benefits of PMI-107

• No limiting or restricting of flow during injection process

• Works quickly giving improved performance of valves, instrumentation and plant efficiency within hours

• Visible results within just 24 hours:• Sales tanks cleaned• Flare tanks cleaned• Process vessels and lines cleaned• Clean and clear separation of water & gas

12” in-field pipe line pig returns

Superior field

performance of PMI-107

after 9 months with market leader’s inhibitor 6 months later with PMI-107

16” export pipe line pig returns

after 9 months with market leader’s inhibitor 6 months later with PMI-107

Superior field

performance of PMI-107

Pigging with confidence! One year earlier, this pipeline was 100% plugged with wax and suffering from corrosion. They now have a 0% BSW and visible results.

Superior field

performance of PMI-107

Thermal image of a 300,000 BBL tank BEFORE cleaning

Superior field

performance of PMI-107

Thermal image of a 300,000 BBL tank AFTER cleaning

There was zero entry intothe tank and all but the in-organics were recovered,shipped and sold with zerodowntime, while droppingthe emulsions to zero andshipping 30,000 recoveredbarrels of oil!We can also remove the in-organics without man entryinto the tank.

Superior field

performance of PMI-107

Superior field

performance of PMI-107

Increased production

Pre treatment

Post treatment with PMI-107 BPD increase

Post-treatment production %

Well 31 296 461 165 156%

Well 42 33 227.7 194.7 690%

Well 56 77 336.1 259.1 436%

Total 406 1025 619 252%

An increase of 619 BPD, which at $50 per barrel = more than

$11,000,000 pa increased revenue

Payback was 96 hours in this application

Laboratory tests by independent UK Lab - Wax Inhibition

Coaxial Shear Test Method

PMI-107 @ 220ppm 85% Inhibition

Leading Competitor @ 500ppm 44% Inhibition

Cold Finger Test

PMI-107 @ 220ppm 80% Inhibition

Performance

verification of PMI-107

Laboratory tests by independent UK Lab- Corrosion Inhibition

Target reasonable rate (ref: NORSOK M-001) <0.10 mm/yr

Leading market competitor @ 220ppm >10.00 mm/yr

PMI-107 @ 220ppm 0.07 mm/yr

Lab report – “For both the welded and parent metal coupons,

general corrosion rates of approximately 0.06-0.07 mm/yr

were obtained at both concentrations of corrosion inhibitor,

indicating satisfactory corrosion inhibition and/or protective

film formation as the value is lower than 0.1 mm/yr.”

Rotary Cage Autoclave

Welded and Parent metal coupon average weight loss calculated to corrosion rate over one year

Performance

verification of PMI-107

Performance

verification of PMI-107

PMI-107

AIE report – “As with the tests performed at 220 ppmv, no

significant pitting was noted on the parent material of either

the welded or parent metal samples at a corrosion inhibitor

concentration of 300 ppmv. The absence of significant pitting

corrosion confirms the performance of the corrosion

inhibitor against pitting corrosion. .”

Performance

verification of PMI-107

Performance

verification of PMI-107

PMI-107

Performance

verification of PMI-107

PMI-107

Performance

verification of PMI-107

PMI-107

Figure 1 – Results of

emulsion separation at 38 °C with no

PMI-107. Separation

time is the time after

turning off the mixing,

i.e. 5 minutes means

it has been five

minutes since mixing

was stopped.

Performance

verification of PMI-107

Figure 1 – Results of

emulsion separation at 38°C with 300

ppm PMI-107.

Separation time is

the time after turning

off the mixing, i.e. 5

minutes means it has

been five minutes

since mixing was

stopped.

Performance

verification of PMI-107

“The well produces very high internal corrosion rates and the pipelines suffer from high levels of wax deposition

which resulted in one of the pipelines becoming fully blocked.

PMI-107 was introduced into the field as a multipurpose product to primarily manage the internal corrosion risk and

prevent future blockages due to wax build up. Following its introduction into the field some 12 months ago, PMI-107

has marked a step change in terms of managing corrosion and wax in our pipelines.

During a stringent corrosion testing programme undertaken in the UK, the inhibitor was shown to exhibit the

corrosion rates to below industry standards and the field water sampling and coupon results have backed up its

solid performance in the field.

In addition to the wax and corrosion inhibition, we have gone from measureable amounts of water in the export

crude to virtually no water in the crude. Based on this product, we have been very impressed with the performance

of this chemical in both lab trials and field performance”

Endorsement from major middle-east oil producer

Field validation

of PMI-107