Installs quickly

Will not deteriorate and damage roof covers

Many configurations for every situation

Compatible with all roof cover materials

Custom solutions

Standard Pipe Supports

Adjustable & Strut Models

Safety Solutions

Long Term Support Fast and Easy to Install. Saves Time & Labor

Great for solar applications!

PipeGuard Pipe Supports OMG PipeGuard ® is the roofing industry’s preferred pipe support. With nine models ranging in size and configuration, there’s a PipeGuard for virtually every application. From our newest Safety Yellow products to our adjustable or standard supports, nothing is as fast, easy or economical.

Universal features:• Supports steel, PVC pipe, copper tubing, solar, electrical/HVAC conduit and more!• Wide bases prevent damage to roof covers • Triangle shape sheds water and provides superior stability• Will not rot or deteriorate• Nine sizes for pipes up to 6-inches (150mm) in diameter and heights up to 10-inches

(255mm)

ORIGINAL PIPEGUARDThe line of original PipeGuard Pipe Supports is designed to support most common roof-top pipes from ½- to 5-inches (10 to 125mm) in diameter. Made from heavy duty EPDM, PipeGuard does not require any tools for installation. Simply compress base to “open” pipe clamp, and place it around the pipe. Position in place and you’re finished. Typical installation time is less than 10 seconds.

• 4 sizes• Sold in boxes of 10 and 20

HEIGHT-ADJUSTABLE PIPEGUARDWhen the job calls for supporting pipes at various heights, call for the OMG Height Adjustable PipeGuard. This versatile pipe support can accommodate pipes up to 4-inches (100mm) in diameter and can be easily adjusted to the height you need with a wrench.

• Adjustable from 6- to 8½-inches (150 to 215mm)• Stainless steel support channel provides

stability and balance• Includes integral rollers for pipe movement

Large

Tall Small

Small

Mini

PipeGuard saves time!

ATTACH & POSITION PIPEGUARD

1 EASY STEP!

NO MORE WOOD BLOCKS. When it comes to small pipe supports, nothing is as fast or economical as OMG PipeGuard® Pipe Supports.

Some think that wood blocks are just as good, but after a few years in the sun and weather, they deteriorate and threaten the roofing system.

Consider the time and effort that goes into a wood block support. The diagram at left shows all the steps involved.

That’s a lot of work! And you might need a slip sheet as well.

Once you add all the time and labor, the real cost for wood is much more than you thought. More important, you probably have better things for your crew to do than run around making supports that don’t work well and won’t last.

Wouldn’t it be easier to purchase OMG PipeGuards and have them delivered directly to the jobsite where they can be installed in one simple step?

TRAVEL TO LUMBER

YARD

BUY WOOD, CLAMPS & SCREWS

UNLOAD, CUT & STACK

WOOD

TRANSPORT BLOCKS TO JOB SITE

POSITION UNDER PIPES

INSTALLTHE

CLAMPS

RUBBER STRUT PIPE SUPPORTS Rubber strut models are designed to support multiple pipes at heights from 4- to 10-inches (100 to 255mm) off the roof. Weather resistant heavy duty EPDM bases won’t rot or damage roof covers and allows for pipe expansion and contraction. Each features a low profile, 15⁄8-inch (40mm) wide galvanized strut channel and can be used for single or multiple pipes.

• Low profile, 15⁄8-inch (40mm) wide galvanized strut channel can be used for single or multiple pipes

• 6-inch (150mm) long base• Available with or without height-

adjustable rail• Accommodates standard strut

clamps (sold separately)

CUSTOM APPLICATIONS

Custom design and fabrication is an OMG specialty. If you are working with an unusual application, call us. We can manu facture supports that meet your specifications in any quantity.

Visit OMGRoofing.com to download the latest CSI 3-Part Specification and our CAD details available in DXF, DWG and PDF form.

“Recently, I decided to try PipeGuards instead of encapsulating wood blocks. Looking back, when I compare the labor cost vs. the savings in material cost, it does not even compare. Sometimes in our business we fail to look at the savings in labor when trying to save a buck on material. When I look at what it would have cost me to cut the blocks, physically fasten the tie straps, and then encapsulate each one with membrane, I would have spent 15–20 times the amount of labor. Making the decision to spend a bit more in material cost saved me quite a bit on the back-end in labor.”

Josh Haggard Sales Manager/Estimator, E. Cornell Malone Corp., Pensacola, Florida

SAFETY YELLOW PIPEGUARDClearly identify potential rooftop trip hazards with Safety Yellow PipeGuards. Made with 100% recycled HDPE, they’re compatible with all common roof covers including PVC. The 10-inch (255mm) long base won’t damage roof covers and provides strength and stability for achieving superior load capacity.

• Low profile, 15⁄8-inch (40mm) wide galvanized strut channel can be used for single or multiple pipes

• Standard and height-adjustable models available

• HDPE provides unmatched strength and stability for superior load capacity

• Accommodates standard strut clamps (sold separately)• Custom options available to address non-standard

heights and widths!

Yellow PipeGuards are made with 100% recycled material!

1½"

(40m

m)

3½" (

90m

m)

6" (1

50m

m)

MINI SMALL TALL SMALLPGM-BK

Supports ½" to 1½" (10 to 40mm) pipe diameters; replaces 2" x 4"

(50 x 100mm) wood block

PGS-BKSupports ¾" to 2" (20 to 50mm)

pipe diameters; replaces 4" x 4" (100 x 100mm) wood block

PGTS-BKSupports ¾" to 2" (20 to 50mm)

pipe diameters; replaces 6" x 6" (150 x 150mm) wood block

3½" (

90m

m)

6"–8

½" (

150–

215m

m)

4" (1

00m

m)

6" (150mm)

LARGE HEIGHT ADJUSTABLE STRUT MODEL*PGL-BK

Supports 2½" to 5" (60 to 125mm) pipe diameters; replaces 4" x 4"

(100 x 100mm) wood block

PGHA85-BKSupports ½" to 4" (10mm to 100mm)

pipe diameters; replaces 4" x 4" (100 x 100mm) wood block

PGSTRUT6-BKSupports multiple pipes, various sizes

up to 5" (125mm) total diameter; replaces 4" x 4" (100 x 100mm) wood block

4"–1

0"(1

00–2

55m

m)

10" (255mm)

10" (255mm)

3½" (

90m

m)

3½"–

10"

(90–

255m

m)

10" (255mm)

HEIGHT ADJUSTABLE STRUT* SAFETY YELLOW STRUT* YELLOW HEIGHT ADJ. STRUT*PGSTRUT10X10HA-BK

Supports multiple pipes, various sizes up to 6" (150mm) total diameter

PGSTPE10-YWSupports multiple pipes, various

sizes up to 6" (150mm) total diameter

PGSTPE10X10HA-YWSupports multiple pipes, various

sizes up to 6" (150mm) total diameter

*Clamps sold separately.

For more information or an on-site PipeGuard demonstration, please call 800.633.3800.

PS10

05

Rev.

101

5

Sizing Chart

Scan to see PipeGuard online.

OMG PipeGuard® is a registered trademark of OMG, Inc. Copyright © 2015 OMG, Inc. All rights reserved. As with all building materials it is the responsibility of the installer to review its usage with a design professional to confirm safety, compatibility and acceptance with the roof cover manufacturer as well as local building codes.

NATIONWIDE CUSTOMER SUPPORT OMG is the leading U.S. supplier of roofing fasteners, roof insulation adhe-sives, retrofit roof drains, pipe supports, roof repair tape and engineered edge metal systems.

When it comes to service, OMG Roofing Products has a nationwide network of field sales representatives available to help. We’re there when you need us for product demonstra-tions, training, job starts and more. Let our local sales representative help with your next project.

Superior productivity. Superior performance.153 BOWLES ROAD, AGAWAM, MA 01001 USA800.633.3800 413.789.0252 OMGROOFING.COM