Pipe Conveyor Belt

BROCHURE

www.pro-cb.com pcb@pro-cb.com

Pipe Conveyor Belt

FEATURES ä Prevents transport materials from flying, spilling or mixing with foreign

substances as transported in a sealed pipe.

ä Consumes less energy than ordinary conveyor lines. ä 3-dimension layouts are available with openings at top, bottom, left or right. ä Allows for maximum 30degree incline transport, much steeper than

ordinary conveyor belts.

ä Occupies minimum installation space. ä Generates much less noise than ordinary conveyor lines.

Self-enclosed conveyor belts(pipe, tube or hose conveyor belts) are primarily used whether used where bulk materials must be conveyed along horizontal and vertical curves in confined spaces, and/or where the environments has to be protected resp. where spillage must be avoided. A pipe belt can negotiate tight horizontal and vertical curves. This eliminates or reduces transfer points, which is a big cost saving.

APLICATION ä Cement and concrete plants ä Lime industry ä Tunnel construction ä Conveying dusty and fine-grained material ä Material of lower density and environmentally hazardous material ä Silo conveyors ä Conveyors crossing roads (bridge conveyors) ä Heating stations, power stations, garbage incinerating plants

Design-based benefits A pipe conveyor belt differs from a conventional, troughed belt in its design and splicing technology and performs special conveying tasks. Mining and industrial applications often require relatively large inclines and tight curves to be overcome in tight spaces and at high mass flow rates. The particular features of modern pipe belt conveyors include: no transfer points, no material spillage along the conveyor route, and tight 3D curves.

Fabric or steel-cord carcass Depending on requirements, the pipe belt is equipped with high-quality fabric or steel-cord strength members and a system of transverse reinforcement. This ensures a stable, durable tubular form. The high-tensile steel-cord pipe belts (kN > 5400 N/mm) offer new prospects, for example in surface and underground mining operations.

Specification and Conveying Efficiency

Inner Pipe Diameter, mm Loading Area, m2 Conveyor Speed, m/min Conveyor Volume, m3/h

150 0.013 120 95

200 0.024 130 184

250 0.037 140 309

300 0.053 150 477

350 0.072 175 758

400 0.094 200 1131

500 0.147 225 1988

600 0.212 250 2875

700 0.289 275 3931

800 0.377 300 5157

Standard Specifications

Pipe Diameter, mm Belt Width, mm Standard Strength, KN/m

200 315 500 630 800

150 600 3+2 3+2

200 780 3+2/5+2 3+2/5+2 3+2/5+2

250 950 3+2/5+2 3+2/5+2 3+2/5+2

300 1100 3+2/5+2 3+2/5+2 3+2/5+2

350 1300 3+2/5+2 5+2 5+2

400 1500 5+2 5+2 5+2

500 1850 5+2 5+2 5+2

Layout Conditions Of Pipe Conveyor