PEXc State-of-the-art Plumbing Systems Roth Industries, Inc. 268 Bellew Ave South Watertown, NY 13601 Phone: 888-266-7684 Fax: (315) 475-0200 Email: [email protected] www.roth-usa.com Roth Canada 1607 rue de l’Industrie Belœil (Québec) Canada J3G 4S5 Phone: (450) 464-1329 1 800 969-ROTH (7684) Fax: (450) 464-7950 Email: [email protected] http://www.roth-canada.com Roth reserves the right to change model specifications and descriptions used in this document at any time, without notice. Roth will provide you with assistance, including heat- loss calculations, for your ultra comfort zone hydronic radiant heating system. Using leading-edge software programs, Roth’s design and technical support team will guide you through every aspect of the project. Roth-trained installers will receive ongoing support throughout the installation, including easy-to-follow installation manuals. Part # 2300100032 You don’t drink milk, juice or soda pop from copper or galvanized steel bottles. So why would you want to drink water from copper pipes when you could use the same type of materials used to package some of our most common beverages? Roth PEXc System Tubing is the backbone of the Roth Plumbing System. This state of the art material is made by “cross-linking” (X) polyethylene (PE) tubing – the same material used to make plastic milk jugs – with a high-energy electron beam (c). The cross-linking process adds additional bonds between the polyethylene molecules to make it stronger, more resilient and resistant to higher temperatures and pressures than other plastic pipe systems. Unlike most similar products from other manufacturers, we don’t use chemicals to cross-link our tubing. Unlike other types of PEX tubing that are cross-linked by pass- ing the tubing through a chemical bath, our electron beam method results in very uniform cross-linking through the entire wall thickness of the tubing – and we don’t have to worry about rinsing all the chemical residue from the inside of the tubing when we’re finished. If you’re concerned about purity, Roth PEXc tubing is the product to use. PEXc is the product used for drinking water systems in Europe where it was pioneered in the 1970’s and Roth is among the largest manufacturers of PEXc tubing in Germany. Roth has the experience and the products to provide the cleanest, most flexible plumbing system available today. PEXc State-of-the-art Plumbing Systems Smile. You’ve found a friend in Roth PEXc tubing CHOOSE PEXc FOR PURITY. PROFESSIONAL SUPPORT FROM PLANNING THROUGH DESIGN AND INSTALLATION North America Distributed by: THE SOLUTION FOR MODERN PLUMBING PROFESSIONAL

PEXc North America - roth-usa.com · residue from the inside of the tubing ... Roth PEXc tubing is the product to use. PEXc is the product used for drinking water systems in Europe

Download PDF Report

Upload
others
View
2
Download
0

Embed Size (px)

Citation preview

Page 1: PEXc North America - roth-usa.com · residue from the inside of the tubing ... Roth PEXc tubing is the product to use. PEXc is the product used for drinking water systems in Europe

PEXcState-of-the-artPlumbing Systems

Roth Industries, Inc.268 Bellew Ave South Watertown, NY 13601Phone: 888-266-7684Fax: (315) 475-0200Email: [email protected]

Roth Canada1607 rue de l’IndustrieBelœil (Québec) Canada J3G 4S5Phone: (450) 464-13291 800 969-ROTH (7684)Fax: (450) 464-7950Email: [email protected]://www.roth-canada.com

Roth reserves the right to change model specifications and descriptions used inthis document at any time, without notice.

Roth will provide you with assistance, including heat-loss calculations, for your ultra comfort zone hydronicradiant heating system. Using leading-edge softwareprograms, Roth’s design and technical support teamwill guide you through every aspect of the project.Roth-trained installers will receive ongoing supportthroughout the installation, including easy-to-followinstallation manuals.

Par

t # 2

3001

0003

You don’t drink milk, juice or sodapop from copper or galvanized steelbottles. So why would you want to drink water from copper pipeswhen you could use the same type of materials used to package someof our most common beverages?

Roth PEXc System Tubing is thebackbone of the Roth PlumbingSystem. This state of the art materialis made by “cross-linking” (X) polyethylene (PE) tubing – the samematerial used to make plastic milkjugs – with a high-energy electronbeam (c). The cross-linking processadds additional bonds between the polyethylene molecules to makeit stronger, more resilient and resistant to higher temperatures and pressures than other plastic pipesystems. Unlike most similar prod-ucts from other manufacturers, wedon’t use chemicals to cross-link ourtubing. Unlike other types of PEXtubing that are cross-linked by pass-ing the tubing through a chemicalbath, our electron beam methodresults in very uniform cross-linkingthrough the entire wall thickness ofthe tubing – and we don’t have toworry about rinsing all the chemicalresidue from the inside of the tubingwhen we’re finished.

If you’re concerned about purity,Roth PEXc tubing is the product touse. PEXc is the product used fordrinking water systems in Europewhere it was pioneered in the 1970’sand Roth is among the largest man-ufacturers of PEXc tubing inGermany. Roth has the experienceand the products to provide thecleanest, most flexible plumbing sys-tem available today.

PEXcState-of-the-artPlumbing Systems

Smile. You’ve found a friend in Roth PEXc tubing

CHOOSE PEXcFOR PURITY.

PROFESSIONAL SUPPORTFROM PLANNING THROUGHDESIGN AND INSTALLATION

North America

Distributed by:

T H E S O L U T I O N F O R M O D E R NP L U M B I N G P R O F E S S I O N A L