Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
PESD5V0X2UMUltra low capacitance unidirectional double ESD protectiondiode3 February 2014 Product data sheet
1. General descriptionUltra low capacitance unidirectional double ElectroStatic Discharge (ESD) protectiondiode in a DFN1006-3 (SOT883) leadless ultra small Surface-Mounted Device (SMD)plastic package designed to protect up to two signal lines from the damage caused byESD and other transients.
2. Features and benefits• Ultra low diode capacitance: Cd = 0.50 pF• ESD protection up to 10 kV; IEC61000-4-2• IPPM = 1.5 A; IEC 61643-321 (surge)• AEC-Q101 qualified
3. Applications• High-speed data lines• Portable electronics• Communication systems• Computers and peripherals
4. Quick reference dataTable 1. Quick reference dataSymbol Parameter Conditions Min Typ Max Unit
Per diode
Cd diode capacitance f = 1 MHz; VR = 0 V [1] - 0.5 0.65 pF
VRWM reverse standoffvoltage
- - 5 V
[1] Measured from pin 1 or 2 to 3.
© Nexperia B.V. 2017. All rights reserved
Nexperia PESD5V0X2UMUltra low capacitance unidirectional double ESD protection diode
PESD5V0X2UM All information provided in this document is subject to legal disclaimers.
Product data sheet 3 February 2014 2 / 13
5. Pinning informationTable 2. Pinning informationPin Symbol Description Simplified outline Graphic symbol
1 K1 cathode (diode 1)
2 K2 cathode (diode 2)
3 A common anode
31
2
Transparenttop view
DFN1006-3 (SOT883)brb051
1
23
6. Ordering informationTable 3. Ordering information
PackageType number
Name Description Version
PESD5V0X2UM DFN1006-3 DFN1006-3: leadless ultra small plastic package; 3 solder lands SOT883
7. MarkingTable 4. Marking codesType number Marking code
PESD5V0X2UM ZH
© Nexperia B.V. 2017. All rights reserved
Nexperia PESD5V0X2UMUltra low capacitance unidirectional double ESD protection diode
PESD5V0X2UM All information provided in this document is subject to legal disclaimers.
Product data sheet 3 February 2014 3 / 13
8. Limiting valuesTable 5. Limiting valuesIn accordance with the Absolute Maximum Rating System (IEC 60134).Symbol Parameter Conditions Min Max Unit
Per diode
IPPM rated peak pulse current tp = 8/20 µs [1][2] - 1.5 A
Tj junction temperature - 150 °C
Tstg storage temperature -55 150 °C
Tamb ambient temperature -65 150 °C
ESD maximum ratings
IEC 61000-4-2 (contact discharge) [3][2] - 10 kV
IEC 61000-4-2 (air discharge) [3][2] - 15 kV
machine model [2] - 400 V
VESD electrostatic discharge voltage
MIL-STD-883 (human body model) - 10 kV
[1] According to IEC 61000-4-5 and IEC 61643-321.[2] Measured from pin 1 or 2 to 3.[3] Device stressed with ten non-repetitive ESD pulses.
t (µs)0 403010 20
001aaa630
40
80
120
IPP(%)
0
e- t
100 % IPP; 8 µs
50 % IPP; 20 µs
Fig. 1. 8/20 µs pulse waveform according toIEC 61000-4-5 and IEC 61643-321
001aaa631
IPP
100 %90 %
t
30 ns60 ns
10 %
tr = 0.6 ns to 1 ns
Fig. 2. ESD pulse waveform according toIEC 61000-4-2
© Nexperia B.V. 2017. All rights reserved
Nexperia PESD5V0X2UMUltra low capacitance unidirectional double ESD protection diode
PESD5V0X2UM All information provided in this document is subject to legal disclaimers.
Product data sheet 3 February 2014 4 / 13
9. CharacteristicsTable 6. CharacteristicsSymbol Parameter Conditions Min Typ Max Unit
Per diode
VRWM reverse standoffvoltage
- - 5 V
IRM reverse leakagecurrent
VR = 5 V [1] - 1 10 nA
IPP = 1 A; tp = 8/20 µs [2][1] - - 13 VVCL clamping voltage
IPP = 1.5 A; tp = 8/20 µs [2][1] - - 14 V
VBR breakdown voltage IR = 10 mA [1] 7.5 8.8 10 V
Cd diode capacitance f = 1 MHz; VR = 0 V [1] - 0.5 0.65 pF
Rdyn dynamic resistance IR = 10 A [3][1] - 0.9 - Ω
[1] Measured from pin 1 or 2 to 3.[2] According to IEC 61000-4-5 and IEC 61643-321.[3] Non-repetitive current pulse, Transmission Line Pulse (TLP); square pulse; ANSI / ESD STM5.5.1-2008.
VR (V)0 542 31
aaa-010778
0.2
0.4
0.6
Cd(pF)
0
f = 1 MHz; Tamb = 25 °C
Fig. 3. Diode capacitance as a function of reversevoltage; typical values
006aab324
- VCL - VBR - VRWM- IRM- IR
- IPP
V
I
P-N
- +
- IPPM
Fig. 4. V-I characteristics for a unidirectional ESDprotection diode
© Nexperia B.V. 2017. All rights reserved
Nexperia PESD5V0X2UMUltra low capacitance unidirectional double ESD protection diode
PESD5V0X2UM All information provided in this document is subject to legal disclaimers.
Product data sheet 3 February 2014 5 / 13
VCL (V)0 302010
aaa-010779
10
20
30
I(A)
0
tp = 100 ns; Transmission Line Pulse (TLP)
Fig. 5. Dynamic resistance
© Nexperia B.V. 2017. All rights reserved
Nexperia PESD5V0X2UMUltra low capacitance unidirectional double ESD protection diode
PESD5V0X2UM All information provided in this document is subject to legal disclaimers.
Product data sheet 3 February 2014 6 / 13
50 Ω
Rd
Cs
DUT(DEVICEUNDERTEST)
RG 223/U50 Ω coax
ESD TESTER
IEC 61000-4-2, ed.2Cs = 150 pF; Rd = 330 Ω
4 GHz DIGITALOSCILLOSCOPE
40 dBATTENUATOR
unclamped +8 kV ESD pulse waveform(IEC 61000-4-2 network)
0
6
2
10
V(kV)
-2
t (ns)-10 7030
4
8
4020100 50 60
clamped +8 kV ESD pulse waveform(IEC 61000-4-2 network)
unclamped -8 kV ESD pulse waveform(IEC 61000-4-2 network)
-8
-2
-6
2
V(kV)
-10
t (ns)-10 7030
-4
0
4020100 50 60
aaa-010764
t (ns)-10 705010 30
-20
-60
20
60
VCL(V)
-100
clamped -8 kV ESD pulse waveform(IEC 61000-4-2 network)
t (ns)-10 705010 30
20
60
100
VCL(V)
-20
Fig. 6. ESD clamping test setup and waveforms
© Nexperia B.V. 2017. All rights reserved
Nexperia PESD5V0X2UMUltra low capacitance unidirectional double ESD protection diode
PESD5V0X2UM All information provided in this document is subject to legal disclaimers.
Product data sheet 3 February 2014 7 / 13
10. Test information
10.1 Quality informationThis product has been qualified in accordance with the Automotive Electronics Council(AEC) standard Q101 - Stress test qualification for discrete semiconductors, and issuitable for use in automotive applications.
11. Application informationThe device is designed for the protection of up to two unidirectional data lines from surgepulses and ESD damage.
006aab252
bidirectional protectionof one line
DUT
line 1 to be protected
GND
DUT
line 1 to be protected
unidirectional protectionof two lines
line 2 to be protected
GND
Fig. 7. Application diagram
Circuit board layout and protection device placement
Circuit board layout is critical for the suppression of ESD, Electrical Fast Transient (EFT)and surge transients. The following guidelines are recommended:
1. Place the device as close to the input terminal or connector as possible.2. Minimize the path length between the device and the protected line.3. Keep parallel signal paths to a minimum.4. Avoid running protected conductors in parallel with unprotected conductors.5. Minimize all Printed-Circuit Board (PCB) conductive loops including power and
ground loops.6. Minimize the length of the transient return path to ground.7. Avoid using shared transient return paths to a common ground point.8. Use ground planes whenever possible. For multilayer PCBs, use ground vias.
© Nexperia B.V. 2017. All rights reserved
Nexperia PESD5V0X2UMUltra low capacitance unidirectional double ESD protection diode
PESD5V0X2UM All information provided in this document is subject to legal disclaimers.
Product data sheet 3 February 2014 8 / 13
12. Package outline
UNIT A1max.A(1) b b1 e1e L L1
REFERENCESOUTLINEVERSION
EUROPEANPROJECTION ISSUE DATE
IEC JEDEC JEITA
mm 0.500.46
0.200.12
0.550.470.03 0.62
0.55 0.35 0.65
DIMENSIONS (mm are the original dimensions)
Note1. Including plating thickness
0.300.22
0.300.22
SOT883 SC-101 03-02-0503-04-03
D E
1.020.95
L
E
2
3
1
b
b1
A1
A
D
L1
0 0.5 1 mm
scale
Leadless ultra small plastic package; 3 solder lands; body 1.0 x 0.6 x 0.5 mm SOT883
e
e1
Fig. 8. Package outline DFN1006-3 (SOT883)
© Nexperia B.V. 2017. All rights reserved
Nexperia PESD5V0X2UMUltra low capacitance unidirectional double ESD protection diode
PESD5V0X2UM All information provided in this document is subject to legal disclaimers.
Product data sheet 3 February 2014 9 / 13
13. Soldering
solder lands
solder resist
occupied area
solder paste
sot883_fr
1.3
0.3
0.6 0.7
0.4
0.9
0.3(2×)0.4(2×)
0.25(2×)
R0.05 (12×)0.7
Dimensions in mm
Fig. 9. Reflow soldering footprint for DFN1006-3 (SOT883)
© Nexperia B.V. 2017. All rights reserved
Nexperia PESD5V0X2UMUltra low capacitance unidirectional double ESD protection diode
PESD5V0X2UM All information provided in this document is subject to legal disclaimers.
Product data sheet 3 February 2014 10 / 13
14. Revision historyTable 7. Revision historyData sheet ID Release date Data sheet status Change notice Supersedes
PESD5V0X2UM v.1 20140203 Product data sheet - -
© Nexperia B.V. 2017. All rights reserved
Nexperia PESD5V0X2UMUltra low capacitance unidirectional double ESD protection diode
PESD5V0X2UM All information provided in this document is subject to legal disclaimers.
Product data sheet 3 February 2014 11 / 13
15. Legal information
15.1 Data sheet statusDocumentstatus [1][2]
Productstatus [3]
Definition
Objective[short] datasheet
Development This document contains data fromthe objective specification for productdevelopment.
Preliminary[short] datasheet
Qualification This document contains data from thepreliminary specification.
Product[short] datasheet
Production This document contains the productspecification.
[1] Please consult the most recently issued document before initiating orcompleting a design.
[2] The term 'short data sheet' is explained in section "Definitions".[3] The product status of device(s) described in this document may have
changed since this document was published and may differ in case ofmultiple devices. The latest product status information is available onthe Internet at URL http://www.nexperia.com.
15.2 DefinitionsPreview — The document is a preview version only. The document is stillsubject to formal approval, which may result in modifications or additions.Nexperia does not give any representations or warranties as tothe accuracy or completeness of information included herein and shall haveno liability for the consequences of use of such information.
Draft — The document is a draft version only. The content is still underinternal review and subject to formal approval, which may result inmodifications or additions. Nexperia does not give anyrepresentations or warranties as to the accuracy or completeness ofinformation included herein and shall have no liability for the consequencesof use of such information.
Short data sheet — A short data sheet is an extract from a full data sheetwith the same product type number(s) and title. A short data sheet isintended for quick reference only and should not be relied upon to containdetailed and full information. For detailed and full information see therelevant full data sheet, which is available on request via the local Nexperiasales office. In case of any inconsistency or conflict with theshort data sheet, the full data sheet shall prevail.
Product specification — The information and data provided in a Productdata sheet shall define the specification of the product as agreed betweenNexperia and its customer, unless Nexperia andcustomer have explicitly agreed otherwise in writing. In no event however,shall an agreement be valid in which the Nexperia productis deemed to offer functions and qualities beyond those described in theProduct data sheet.
15.3 DisclaimersLimited warranty and liability — Information in this document is believedto be accurate and reliable. However, Nexperia does not giveany representations or warranties, expressed or implied, as to the accuracyor completeness of such information and shall have no liability for theconsequences of use of such information. Nexperia takes noresponsibility for the content in this document if provided by an informationsource outside of Nexperia.
In no event shall Nexperia be liable for any indirect, incidental,punitive, special or consequential damages (including - without limitation -lost profits, lost savings, business interruption, costs related to the removalor replacement of any products or rework charges) whether or not suchdamages are based on tort (including negligence), warranty, breach ofcontract or any other legal theory.
Notwithstanding any damages that customer might incur for any reasonwhatsoever, Nexperia’s aggregate and cumulative liability towardscustomer for the products described herein shall be limited in accordancewith the Terms and conditions of commercial sale of Nexperia.
Right to make changes — Nexperia reserves the right tomake changes to information published in this document, including withoutlimitation specifications and product descriptions, at any time and withoutnotice. This document supersedes and replaces all information supplied priorto the publication hereof.
Suitability for use in automotive applications — This Nexperiaproduct has been qualified for use in automotiveapplications. Unless otherwise agreed in writing, the product is not designed,authorized or warranted to be suitable for use in life support, life-critical orsafety-critical systems or equipment, nor in applications where failure ormalfunction of a Nexperia product can reasonably be expectedto result in personal injury, death or severe property or environmentaldamage. Nexperia and its suppliers accept no liability forinclusion and/or use of Nexperia products in such equipment orapplications and therefore such inclusion and/or use is at the customer's ownrisk.
Quick reference data — The Quick reference data is an extract of theproduct data given in the Limiting values and Characteristics sections of thisdocument, and as such is not complete, exhaustive or legally binding.
Applications — Applications that are described herein for any of theseproducts are for illustrative purposes only. Nexperia makes norepresentation or warranty that such applications will be suitable for thespecified use without further testing or modification.
Customers are responsible for the design and operation of theirapplications and products using Nexperia products, and Nexperiaaccepts no liability for any assistance with applications orcustomer product design. It is customer’s sole responsibility to determinewhether the Nexperia product is suitable and fit for thecustomer’s applications and products planned, as well as for the plannedapplication and use of customer’s third party customer(s). Customers shouldprovide appropriate design and operating safeguards to minimize the risksassociated with their applications and products.
Nexperia does not accept any liability related to any default,damage, costs or problem which is based on any weakness or defaultin the customer’s applications or products, or the application or use bycustomer’s third party customer(s). Customer is responsible for doing allnecessary testing for the customer’s applications and products using Nexperiaproducts in order to avoid a default of the applicationsand the products or of the application or use by customer’s third partycustomer(s). Nexperia does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined inthe Absolute Maximum Ratings System of IEC 60134) will cause permanentdamage to the device. Limiting values are stress ratings only and (proper)operation of the device at these or any other conditions above thosegiven in the Recommended operating conditions section (if present) or theCharacteristics sections of this document is not warranted. Constant orrepeated exposure to limiting values will permanently and irreversibly affectthe quality and reliability of the device.
Terms and conditions of commercial sale — Nexperiaproducts are sold subject to the general terms and conditions of commercialsale, as published at http://www.nexperia.com/profile/terms, unless otherwiseagreed in a valid written individual agreement. In case an individualagreement is concluded only the terms and conditions of the respectiveagreement shall apply. Nexperia hereby expressly objects toapplying the customer’s general terms and conditions with regard to thepurchase of Nexperia products by customer.
© Nexperia B.V. 2017. All rights reserved
Nexperia PESD5V0X2UMUltra low capacitance unidirectional double ESD protection diode
PESD5V0X2UM All information provided in this document is subject to legal disclaimers.
Product data sheet 3 February 2014 12 / 13
No offer to sell or license — Nothing in this document may be interpretedor construed as an offer to sell products that is open for acceptance or thegrant, conveyance or implication of any license under any copyrights, patentsor other industrial or intellectual property rights.
Export control — This document as well as the item(s) described hereinmay be subject to export control regulations. Export might require a priorauthorization from competent authorities.
Translations — A non-English (translated) version of a document is forreference only. The English version shall prevail in case of any discrepancybetween the translated and English versions.
15.4 TrademarksNotice: All referenced brands, product names, service names andtrademarks are the property of their respective owners.
© Nexperia B.V. 2017. All rights reserved
Nexperia PESD5V0X2UMUltra low capacitance unidirectional double ESD protection diode
PESD5V0X2UM All information provided in this document is subject to legal disclaimers.
Product data sheet 3 February 2014 13 / 13
16. Contents1 General description ............................................... 12 Features and benefits ............................................13 Applications ........................................................... 14 Quick reference data ............................................. 15 Pinning information ...............................................26 Ordering information .............................................27 Marking ................................................................... 28 Limiting values .......................................................39 Characteristics .......................................................410 Test information ..................................................... 710.1 Quality information ............................................... 711 Application information .........................................712 Package outline ..................................................... 813 Soldering ................................................................ 914 Revision history ...................................................1015 Legal information .................................................1115.1 Data sheet status ............................................... 1115.2 Definitions ...........................................................1115.3 Disclaimers .........................................................1115.4 Trademarks ........................................................ 12
© Nexperia B.V. 2017. All rights reservedFor more information, please visit: http://www.nexperia.comFor sales office addresses, please send an email to: [email protected] Date of release: 03 February 2014