Embed Size (px)
DESCRIPTION
Peikko Group Product Catalog 2015-02-02
Citation preview
PEIKKO GROUP
PRODUCT CATALOGUE02.02.2015
www.peikko.com
Peikko Group – Concrete Connections since 1965
PEIKKO GROUP CORPORATION
Peikko supplies a large selection of concrete connectionsand composite beams both for precast and cast-in-situsolutions in wide variety of applications. Peikko, foundedin 1965, provides innovative solutions to help customersmake their building process faster, easier and morereliable.
Our aim is to serve our customers locally with leadingsolutions in the field in terms of quality, safety, andinnovation. Local sales contact information can be foundon the last pages and on our website at www.peikko.com.
APPROVALS, PRODUCT TESTING AND QUALITYThere are more than 200 Technical Approvals, eithercountry specific or ETA Approvals on the products.Detailed product specific approval information can befound in the product information of each product.
Peikko does not rely only on calculation models, but theproducts have been tested in leading universities andlaboratories. During past five years, tests have beencarried out in e.g. Czech Republic, Finland, Germany,Italy, Sweden and the UK.
The results of our quality and environment work areinspected regularly by external audits.
TECHNICAL INFORMATIONDetailed technical information and limitations forapplication, requirements for the concrete and correctionfactors for capacities can be found in the product’stechnical manual. The technical manuals are available onour website at www.peikko.com or as printed manuals onrequest.
GENERAL TERMS AND CONDITIONS OFSALEPeikko Group's general terms and conditions of sale canbe found on the last pages of this Product Catalogue.
CONTACT INFORMATIONContact information to local Peikko offices can be foundon the last pages of this Product Catalogue and on ourwebsite at www.peikko.com
Peikko Group Corporation
P.O.Box 104Voimakatu 3FI-15101 Lahti, FinlandTel. +358 20 707 511Fax. +358 3 733 [email protected]
TABLE OF CONTENTSBolt Connections ................................................................................................. 4
Anchor Bolts ............................................................................................................................... 4Column Shoes............................................................................................................................ 13Beam Shoes .............................................................................................................................. 17Wall Shoes ................................................................................................................................ 20
Fastening Products............................................................................................. 22Fastening Plates ........................................................................................................................ 22Fastening Items......................................................................................................................... 31Corner Protectors ....................................................................................................................... 36
Lifting Systems.................................................................................................. 40Rapid Coupling .......................................................................................................................... 40Threaded Lifting Systems ............................................................................................................ 46Lifting Accessories ..................................................................................................................... 57
Ties, Loops and Fixing Sockets............................................................................. 58Loops....................................................................................................................................... 58Ties and Pins............................................................................................................................. 62Fixing Sockets ........................................................................................................................... 67
Punching Prevention Systems .............................................................................. 68Punching and Shear Reinforcement System .................................................................................... 68
Flooring Products............................................................................................... 73Free Movement Joints................................................................................................................. 73Screed Rails .............................................................................................................................. 81Permanent Joint Fillers ............................................................................................................... 85Load Transfer Systems................................................................................................................. 87
Hidden Corbels .................................................................................................. 92Column Corbels .......................................................................................................................... 92Slab Corbels .............................................................................................................................. 96
Hangers ........................................................................................................... 98Hollow-core Slab Hangers............................................................................................................ 98
Rebar Coupling Systems .....................................................................................100Rebar Couplers..........................................................................................................................100
Balcony Connections .........................................................................................102Cantilever Slab Connectors .........................................................................................................102Supported Slab Connectors .........................................................................................................106Balcony Parapet Connectors........................................................................................................108
DELTABEAM......................................................................................................109DELTABEAM with precast floors ...................................................................................................109DELTABEAM with composite floors ...............................................................................................110DELTABEAM with cast-in-situ floors .............................................................................................110DELTABEAM in renovation ..........................................................................................................110DELTABEAM info for Designers.....................................................................................................111
Steel Structures ................................................................................................114
3Peikko Group Product Catalogue 02.02.2015
BOLT CONNECTIONS
Bolt connections are used for connecting load-bearingprecast structures, such as columns, beams and walls toother elements and foundations. The Peikko boltconnection enables an easy, fast and accurate installation.It is possible to adjust structures at the correct level andvertical position. Connections can be planned to be carriedout without propping during installation. Connections willreach their final strength after grouting.
Bolt connection capacities are defined by the bolts used inthe connection. The Peikko Designer; Column Connectionmodule enables simple and reliable dimensioning of boltconnections. Peikko Designer is available free of charge onPeikko's website.
ANCHOR BOLTS
Short stud-headed anchor bolts (type L) are principallyused as basic bolts. Long Anchor Bolts (type P) are used insplices of precast elements. Rebar HPM Anchor Bolts aremade of steel wire and Strong PPM Anchor Bolts from highstrength steel. Bolts without surface treatment are placedwithin the concrete structure where the concrete coveringprotects the bolts against corrosion. ECO galvanized andhot dip galvanized bolts are available for applicationsrequiring corrosion protection. If required, we alsomanufacture bolts to special measurements. Aninstallation template enables accurate installation of bolts.
Peikko's range also includes high-strength bolts (FatBar) for foundations of wind turbines, lines andchimney hoods as well as for other demanding constructions.
4 Peikko Group Product Catalogue 02.02.2015
Surface Coating Options
Peikko anchor bolts are available with alternativeprotective coatings. Standard coating options for anchorbolts are described below. If other type of protectionagainst corrosion, like electro-zinc-plating or stainlesssteel is needed, please contact your local Peikko salesoffice for more information.
Standard Coating OptionsStandard Coating Options
ECO Galvanizing
Peikko’s ECO Galvanizing is an economical and ecologicalsurface coating which allows anchor bolts to be galvanizedpartly or completely. The coating method is thermally sprayed zinc coating (according to EN ISO 2063)and it is suitable for all Peikko anchor bolts. Minimum coating thickness is 100 µm which corresponds tothe performance of hot-dip galvanizing. Coating fulfills environmental class C3 of standard EN9223-1002.
How to order ECO Galvanized bolts? Just add -ECO after the regular bolt name: HPM24P-ECO
Read more on ECO Galvanizing
Hot-Dip GalvanizingHot-Dip Galvanizing
Hot-Dip Galvanized (acc. to EN ISO 1461) anchor bolts are dipped into galvanized material completely.Method is suitable for HPM and PPM anchor bolts. Minimum coating thickness is 55 µm which fulfillsenvironmental class C3 of standard EN 9223-1002.
How to order Hot-Dip Galvanized bolts? Just add -HDG after the regular bolt name: PPM30L-HDG
Rebar HPM Anchor Bolts
HPM Rebar Anchor Bolts transfer tension, compression andshear forces to the reinforced concrete base structure e.g.foundation. There are two main anchor types:
• Long Anchors which are used for splices• Short Anchors with headed studs which are
used for anchoring
The Long Anchor bolts transfer the compression andtension forces through the bond of the ribs of ribbed bars.The Short Anchor bolts transfer the forces through thecombination of headed studs and bond of the ribs. Boltsare color coded with same color as matching shoe types.
5Peikko Group Product Catalogue 02.02.2015
Approvals
ETAETA (HPM L): ETA-02/0006 (en, pl)BelarusBelarus: TC 01.1331.11FinlandFinland: BY 5 B N:o 359 M1Germany:Germany: Z-30.6-39HungaryHungary: A-744/2/2007NetherlandsNetherlands: K65974/01PolandPoland: AT-15-5060/2009RomaniaRomania: 007-01/163-2009RussiaRussia: POCC FI.АВ28.H15900SlovakiaSlovakia: TO-09/0150 (HPM P)SwedenSweden: 0161/97TurkeyTurkey: No. 802
CE MarkingCE Marking
HPM-L
Materials
Surface coating options available: Hot Dip Galvanizing (Zn, EN ISO 1461) and ECO Galvanizing (Zn, ENISO 2063)
Dimensions
6 Peikko Group Product Catalogue 02.02.2015
Resistances
NOTE 1NOTE 1: Resistances VRd and VRd,0 are valid for height of joint equal to tGrout.NOTE 2NOTE 2: The effect of combined tension and shear must be checked where necessary.
Strong PPM Anchor Bolts
Strong PPM Anchor Bolts transfer tension, compressionand shear forces to the reinforced concrete base structuree.g. foundation. There are two main Anchor types:
• Long Anchors which are used for splices• Short Anchors with headed studs which are
used for anchoring
The Long Anchor Bolts transfer the compression andtension forces through the bond of the ribs of ribbed bars.The Short Anchor Bolts transfer the forces through thecombination of headed studs and bond of the ribs. Boltsare color coded with same color as matching shoe types.
Approvals
FinlandFinland: BY 5 B N:o 359 M1GermanyGermany: Z-30.6-39 (PPM P)GermanyGermany: Z-21.5-1706 (PPM L)HungaryHungary: A-744/2/2007PolandPoland: AT-15-5060/2009RomaniaRomania: 007-01/163-2009RussiaRussia: POCC FI.АВ28.H15900SlovakiaSlovakia: TO-09/0150TurkeyTurkey: No. 802
7Peikko Group Product Catalogue 02.02.2015
Materials
Surface coating options available: Hot Dip Galvanizing (Zn, EN ISO 1461) and ECO Galvanizing (Zn, ENISO 2063)
Dimensions
Resistances
8 Peikko Group Product Catalogue 02.02.2015
Wind Turbine Foundation FatBar System
Peikko is proud to introduce its latest innovation inanchoring technology for wind turbine towers: The FatBar!Its unique design enables it to sustain greater fatigueloads, which increases the life span of turbinefoundations.
FatBars are assembled with DIN 6319 washers class 10 andDIN 6330 B nuts class 10. Bolt threads are cold-rolled withspecial threading for fatigue loading. The bolts areproduced according EN 898-1 to class 10.9.
Approvals
ETA:ETA: 10/0246
Dimensions
FatBars are available in lengths up to 6000 mm. Diameters can be chosen between 36 and 39 mm. Forother sizes please contact us.
Resistances
9Peikko Group Product Catalogue 02.02.2015
Heavy Duty Bolts
Peikko Peikko Heavy Duty Bolts are assembled using EN14399-6 washers class 10 and EN 4032 nuts class 10.Peikko offers choices of PVC sleeve or grease tapeprotection for a reliable post tension solution.
Resistances
Wall Shoe Anchor Bolts
Wall Shoe Anchor Bolts transfer tension, compression andshear forces to the reinforced concrete base structure e.g.foundation. The bolts are based on standard HPM and PPManchor bolt types and they are delivered with speciallydesigned AL wall shoe washers. There are two main anchortypes:
• Long Anchors which are used for splices• Short Anchors with headed studs which are
used for anchoring
The Long Anchor bolts transfer the compression andtension forces through the bond of the ribs of ribbed bars.The Short Anchor bolts transfer the forces through the combination of headed studs and bond of theribs. Bolts are color coded with same color as matching shoe types.
10 Peikko Group Product Catalogue 02.02.2015
Materials
Dimensions
11Peikko Group Product Catalogue 02.02.2015
Resistances
PPL Bolt Installation Template
Peikko PPL Bolt Installation Template is a steel plate forinstalling bolts accurately into castings. Bolts areaccurately positioned and fixed into the mould with PPLBolt Installation Template. Anchor bolts are fixed throughthe holes on the template with bolt's nuts andwashers. PPL Bolt Installation Template can be securedwith nails to the supporting base by its nailing recesses atthe sides. PPL Bolt Installation Template has alignmentmarks for accurate positioning of the anchor bolt group tothe module line. Bolts can be adjusted and tightened tothe correct level.
PPL Bolt Installation Templates are used with HPM andPPM Anchor Bolts.
Dimensions
PPL Bolt Installation Templates are manufactured to given specifications. Please see productinformation leaflet.
12 Peikko Group Product Catalogue 02.02.2015
COLUMN SHOES
HPKM Column Shoes are designed to correspond with theresistance of HPM Bolts, and, correspondingly, PEC ColumnShoes correspond with the resistance of PPM Bolts. Shoesare available both with a fixed and removable recess box.
The number of column shoes to be used depends on, e.g.the dimensions of the column cross section, the strengthof the concrete and the loads on the cross section. Ingeneral, four column shoes at the bottom of the columnsuffice to achieve a moment-stiff connection. Peikko'sColumn Shoes are also approved to be used in areas prone to earthquakes.
HPKM Column Shoes
HPKM Column Shoes are fastening items which are used formoment stiff connections and splices between precastconcrete columns and for example foundations. They arealso used to resist loads during erection stage and thustemporary bracing is normally not needed.
A column is fixed to anchor bolts which are cast into thestructure below the column. Fixing is achieved with nutsand washers screwed to the anchor bolts. It is alsopossible to adjust the column at the correct level andvertical position. The joint between column base andstructure below should be grouted before loading thecolumn. After grout is hardened, the joint works asreinforced concrete structure. Shoes are color coded with same color as matching anchor bolts andrecess boxes.
13Peikko Group Product Catalogue 02.02.2015
Approvals
ETAETA: ETA-13/0603 (en, pl)FinlandFinland: BY 5 B N:o 317 (national)FinlandFinland: BY 5 B-EC 2 N:o 14 (EC2-NA)FinlandFinland: BY 5 B-EC 2 N:o 39 (HPKM-X)GermanyGermany: S/N 120397HungaryHungary: A-744/2/2007NetherlandsNetherlands: K65974/02PolandPoland: AT-15-5061/2013RomaniaRomania: 007-01/163-2009RussiaRussia: POCC FI.AB28.H16302SlovakiaSlovakia: TO-09/0150TurkeyTurkey: No. 802
CE MarkingCE Marking
Materials
Dimensions
Resistances
The resistances are defined by the bolt used in the connection.
14 Peikko Group Product Catalogue 02.02.2015
PEC Column Shoes
PEC column shoes are fastening items which are used formoment stiff connections and splices between precastconcrete columns and for example foundations. They arealso used to resist loads during erection stage and thustemporary bracing is normally not needed.
A column is fixed to anchor bolts which are cast into thestructure below the column. Fixing is achieved with nutsand washers screwed to the anchor bolts. It is alsopossible to adjust the column at the correct level andvertical position. The joint between column base andstructure below should be grouted before loading thecolumn. After grout is hardened, the joint works asreinforced concrete structure. Shoes are color coded with same color as matching anchor bolts andrecess boxes.
Approvals
FinlandFinland: BY 5 B-EC 2 n:o 38 (EC 2 NA)FinlandFinland: BY 5 B n:o 301 (National)FinlandFinland: BY 5 B-EC 2 N:o 39 (PEC-X)GermanyGermany: S-N/020363HungaryHungary: A-744/2/2007PolandPoland: AT-15-5061/2013RomaniaRomania: 007-01/163-2009RussiaRussia: POCC FI.AB28.H16302SlovakiaSlovakia: TO-09/0150TurkeyTurkey: No. 802
Materials
15Peikko Group Product Catalogue 02.02.2015
Dimensions
Resistances
16 Peikko Group Product Catalogue 02.02.2015
Recess Boxes
Recess Boxes are Fixing Accessories which are used to formrecess in concrete column for anchor bolts. There are twomain types:
• CBOX is used with Column Shoes fixed incorner of the column
• MBOX is used with Column Shoes fixed inmiddle of the column
Recess Boxes are color coded with same color as matchingColumn Shoes and Anchor Bolts.
Dimensions
Product code e.g. HPKM 24 - MBOXHPKM 24 - MBOX
BEAM SHOES
RBC Beam Shoes are used in precast frames to provide amoment-stiff connection between columns and beams.Typical applications include heavy frames of industrialconstructions and sports centers.
17Peikko Group Product Catalogue 02.02.2015
RBC Beam Shoes
RBC Beam Shoes are fastening items for moment stiffconnections between precast concrete beams and columns.The connection system consists of the beam shoes fittedin the beam and anchor bolts fitted in the column or wall.
Fixing is achieved with nuts and washers screwed to theanchor bolts. The joint between beam end and verticalstructure should be grouted before loading the beam. Aftergrout is hardened, the joint works as reinforced concretestructure. Shoes are color coded with same color asmatching anchor bolts.
Approvals
HungaryHungary: A-744/2/2007RomaniaRomania: 007-01/163-2009RussiaRussia: POCC FI.AB28.H16302SlovakiaSlovakia: TO-09/0150
Materials
18 Peikko Group Product Catalogue 02.02.2015
Dimensions
* The longer lenghts are to be used in poor bond condition
Resistances
19Peikko Group Product Catalogue 02.02.2015
WALL SHOES
Wall Shoes are used in tension splices of stiffening precaststaircases, elevator shafts or other walls structures. SpecialReinforced Washers (AL) are used for bolts in wall shoeconnections.
SUMO Wall Shoes
SUMO Wall Shoes are fastening items which are designedfor tension splices of wall-like precast concrete elements.Wall shoes are used in e.g. building's stiffening structureslike core walls and elevator shafts. The loads aretransferred from wall to foundations or other load bearingstructures with the help of wall shoes, anchor bolts andwalls' reinforcement. Fixing is done with nuts and specialAL washers as a bolt connection. SUMO Wall Shoes arecolor coded with same color as matching anchor bolts.
Approvals
RussiaRussia: POCC FI.AB28.H16302
Materials
20 Peikko Group Product Catalogue 02.02.2015
Dimensions
Resistances
21Peikko Group Product Catalogue 02.02.2015
FASTENING PRODUCTS
Fastening products are used in concrete structure welding.Welding can be used to joint precast concrete elementstogether or steel structures to concrete structures. Weldingis carried out on a steel plate or angle bar anchored on thesurface of the concrete structure. Peikko's product rangeincludes a wide selection of different standard FasteningProducts. The products are tested, approved and, in termsof load resistance, designed according to Eurocodes. Ifrequired, we also manufacture fastening products tospecial measurements.
FASTENING PLATES
Fastening plates are used in concrete structure welding.The fastening plates transfer loads to the concretestructure via stud-headed anchor bolts, which are weldedto the plates, or via rebars. SBKL Fastening Plates aredesigned to carry moderate loads. Short stud-headedanchor bolts enable fastening also to thin structures. JPLFastening Plates are designed to carry heavy loads indemanding structural fastenings. Long fastening platesenable several fixings on one fastening plate. Typicalapplications are in heavy industrial construction.Fastening plates based on Peikko's stud-headed anchor bolts are ETA-approved.
We also make KL Fastening Plates with anchoring based on straight rebars. KL type fastening plates aresuitable for use close to the edges of a concrete structure, when anchoring can be taken deep into thestructure.
Standard fastening plates come with protective painting. For applications requiring corrosion protection,we produce fastening plates of stainless (e.g. SBKLR) and acid-proof steel (e.g. SBKLH). Anchor Boltsalso come without surface treatment, in which case the concrete covering provides corrosion protection,or, if required, they can be stainless.
22 Peikko Group Product Catalogue 02.02.2015
SBKL Fastening Plates
Fastening Plate for moderate loads specially designed forwall panels, and thin and shallow structures. Stud headedanchors, plate sizes from 50 mm x 100 mm to 300 mm x300 mm, plate thicknesses from 8 to 15 mm, productdepth from 68 mm to 165 mm. Available in variousmaterial combinations in plates and studs. Please ask forfastening plates with ETA-04/0056 specification from oursales!
Approvals
ETAETA: ETA-04/0056FinlandFinland: BY 5 B N:o 381GermanyGermany: ETA-04/0056 (de)RussiaRussia: POCC FI.AB28.H16302SwedenSweden: 3403/89
Materials
23Peikko Group Product Catalogue 02.02.2015
Dimensions
Resistances
24 Peikko Group Product Catalogue 02.02.2015
JPL Fastening Plates
JPL Fastening Plates are used to transfer heavy loads fromsteel structures to concrete. This is done by welding aconnection to the fastening plate. JPL Fastening Plates areespecially suitable for heavy industrial constructions.
Approvals
ETA:ETA: ETA-04/0056Finland:Finland: BY 5 B N:o 323GermanyGermany: ETA-04/0056 (de)RussiaRussia: POCC FI.AB28.H16302Sweden:Sweden: 3403/89Ukraine:Ukraine: UA1.058.0190082-08 / UA1.058.0190088-08
Materials
Painted A 40 µm is standardStainless and acid proof steel also available
25Peikko Group Product Catalogue 02.02.2015
Dimensions
Resistances
26 Peikko Group Product Catalogue 02.02.2015
KL Fastening Plates
KL Fastening Plates are used to transfer moderate loads toconcrete. They are especially suitable when small edgedistances are required for example in column heads or wallpanel sides. Straight rebar anchors are welded on platesurface. Capacities are comparable to SBKL FasteningPlates.
Approvals
FinlandFinland: BY 5 B N:o 381RussiaRussia: POCC RU.AB28.H15899SwedenSweden: 3403/89UkraineUkraine: UA1.058.0190082-08 / UA1.058.0190088-08
Materials
27Peikko Group Product Catalogue 02.02.2015
Dimensions
Resistances
28 Peikko Group Product Catalogue 02.02.2015
Long Fastening Plates
Long PKL, P2KL, and P3KL Fastening Plates are designed tobe used when long fixing or several fixings are needed onone plate. The length of the plates can be flexiblydesigned up to 6 m. Long Fastening Plates are especiallysuitable for heavy industrial constructions and machinefoundations. PKL, P2KL and P3KL Fastening Plates areavailable also according to European Technical Approval.
Approvals
ETAETA: ETA-04/0056FinlandFinland: BY 5 B N:o 330RussiaRussia: POCC FI.AB28.H16302SwedenSweden: 3403/89
Materials
29Peikko Group Product Catalogue 02.02.2015
Dimensions
Resistances
*Resistances are per one row of anchors
30 Peikko Group Product Catalogue 02.02.2015
FASTENING ITEMS
Standard fastening items are designed for frequentconnection details in precast structures. The connectionsare typically located close to the edge of the structure,and the forces are transferred via straight rebars deeperinto the structure.
KKT Angle Bars anchor loads in the structure corners.Typical applications are in heavy industrial construction.
KKT Angle Bars
KKT Angle Bars are designed to be used when long fixingor several fixings are needed on the concrete edges. Theyare especially suitable for heavy industrial constructions.The length of the KKT Angles can be flexibly designed upto 6 m.
Approvals
FinlandFinland: BY 5 B N:o 330RussiaRussia: POCC FI.AB28.H16302SwedenSweden: 3403/89
Materials
31Peikko Group Product Catalogue 02.02.2015
Dimensions
Resistances
*Resistances are per one row of anchors.
TR Fastening Items
TR Fastening Items are especially designed for precaststandard details connecting elements together. They canbe placed close to the structural edges and even intocorners. Anchoring of the item is based on rebar anchors.Defined capacities and tested solutions make the selectionof standard detail safe and easy.
Approvals
FinlandFinland: BY 5 B-EC 2 n:o 31 (EC 2 NA)FinlandFinland: BY 5 B n:o 353 (National)RussiaRussia: POCC RU.AB28.H15899
32 Peikko Group Product Catalogue 02.02.2015
Dimensions
33Peikko Group Product Catalogue 02.02.2015
34 Peikko Group Product Catalogue 02.02.2015
35Peikko Group Product Catalogue 02.02.2015
Resistances
Resistances according to EC + Finnish NA.
CORNER PROTECTORS
Corner protectors are used to protect the corners ofconcrete structures against chipping. The KS CornerProtector is designed to protect the corners of columns orwalls against impacts from, for example, forklift collisions.UKT and SKT Angle Bars are used to protect the edges ofconcrete slabs. Typical applications are in heavy industrialconstruction.
SKT Angle Bars
SKT Angle Bars are designed to be used in the inner cornerof the concrete construction. They can transfer moderateloads to the concrete. The length of the SKT Angle can beflexibly designed up to 6 m. They can be cut easily torequired length at building site. Anchoring of the SKTAngle is based on rebar anchors, which are bent on site tothe right position. Delivery preferably in larger lots.
Approvals
SwedenSweden: 3403/89
Materials
36 Peikko Group Product Catalogue 02.02.2015
Dimensions
UKT Angle Bars
UKT Angle Bars are designed to be used in the outer cornerof the concrete construction. They can transfer moderateloads to the concrete. The length of the UKT Angle can beflexibly designed up to 6 m. They can be cut easily to therequired length at building site. Anchoring of the UKTAngle is based on rebar anchors, which are bent at site tothe right position. Delivery preferably in larger lots.
Approvals
SwedenSweden: 3403/89
Materials
37Peikko Group Product Catalogue 02.02.2015
Dimensions
KS Corner Protectors
KS Corner Protectors are designed to protect the corners ofcolumns and walls. They do not transfer any constructionalloads. KS Corner Protectors are recommended to be used inindustrial construction and warehouses with forklift traffic.Use of corner protectors keeps your investment in goodshape throughout its lifetime.
Approvals
SwedenSweden: 3403/89
Materials
Standard surface coating: Hot Dip Galvanized.
38 Peikko Group Product Catalogue 02.02.2015
Dimensions
RLRK Support
RLRK Supports are designed to be used in the outer cornerof the concrete construction to support chequered platescovering openings in various passages. They do nottransfer any constructional loads. Length of RLRK Supportis 6 m and they can be cut easily to the required length atbuilding site. Anchoring of the RLRK Support is based onrebar anchors, which are bent at site to the right position.
Materials
Painted A 40 µm and Hot Dip Galvanized as standard. Available also in stainless and acid proof steel.
Dimensions
39Peikko Group Product Catalogue 02.02.2015
LIFTING SYSTEMS
Lifting Systems are designed for the safe lifting andtransporting of precast concrete elements. LiftingComponents comprise lifting anchors, clutches and liftingloops as well as installation accessories.
Peikko's lifting systems are CE marked.
RAPID COUPLING
The Rapid Coupling Systems are made for rough handlingconditions and provide a safe solution for all applications. Anchoring takes place either through positivelocking or by reinforcement. Rapid couplers may be used for heavy precast elements with up to 99 tonsper lifting point.
KK Anchors
KK Lifting System is a rapid coupling lifting anchor systemwith load classes ranging from 1.3 to 32 tons. The systemconsists of anchors, lifting clutches and recess formers. Itis used for lifting beams, thick slabs and wall panels aswell as concrete tubes.
40 Peikko Group Product Catalogue 02.02.2015
Approvals
FinlandFinland: BY 5 B-EC2 n:o 5RussiaRussia: POCC FI.AB28.H16302
CE MarkingCE Marking
Materials
KK anchors are produced of a special grade steel.
Resistances
Please refer to Technical Manual.
RR Anchors
RR anchors are designed and produced under strict qualitycontrol and with high performance materials to guaranteethe highest possible safety. The RR anchors has a widerange of different load classes and length and can be usedfor almost all transport applications.
Approvals
FinlandFinland: BY 5 B n:o 375 (RR, RRr, RRK, RRKr)FinlandFinland: BY 5 B n:o 331 (RRPr)
CE MarkingCE Marking
Materials
RR anchors are produced using a special grade steel.
Resistances
41Peikko Group Product Catalogue 02.02.2015
Please refer to Technical Manual.
WRA Wire Rope Anchors
WRA anchors are designed as a rapid coupling system forlifting a wide range of precast elements. By lifting withWRA a pull-angle up to 30° is allowed. The capacity of theanchor is according to the market standard. Special sizesand length - tailor made products - are possible toproduce. WRA anchors are best solution for very heavyelements up to 99 t per lifting point.
CE MarkingCE Marking
Materials
WRA anchors are produced under using a special grade wire rope and high quality ferrules.
Dimensions
42 Peikko Group Product Catalogue 02.02.2015
Metrics h and w can vary due to the flexibility of the rope. All WRA Anchors are zinc coated.
PNLF Sandwich Wall Anchors
PNLF anchors are designed and produced under strictquality control and with high performance materials toguarantee the highest possible safety. The PNLF anchorshas 6 different load classes a and can be used for transportprecast sandwich wall elements.
Materials
RebarsRebars: B600KX, SFS 1259TubesTubes: 1.4301 / AISI 304, EN 10088
43Peikko Group Product Catalogue 02.02.2015
Dimensions
When thickness of insulation E > 200 mm, PNLF is manufactured as triangle shape.
The dimension W is thickness of the insulation layer + 80 mm.
Nomination:Nomination:example. Thickness of insulation E = 240 mm and load class 5 is sufficient:PNLF5 E240PNLF5 E240
44 Peikko Group Product Catalogue 02.02.2015
Resistances
COLIFT Mounting System
The COLIFT Mounting System consists of a mounting shaftwith a slip guard and a rope strut and serves as amounting device for lifting, moving and erecting precastconcrete elements. By attaching a releasing cord to theslip frog the system can be remotely released aftersecuring the element on its place.
The load capacities vary from 5.8 to 42 tons with 30 cmcorbel and from 15.8 to 120 tons without corbels.
The COLIFT Mounting System is manufactured under strictquality control. The system is labeled and CE markedaccording to EU Machinery Directive.
Related lifting slings, wires and cords are not a part of the COLIFT Mounting System delivery.
45Peikko Group Product Catalogue 02.02.2015
CE MarkingCE Marking
Dimensions
THREADED LIFTING SYSTEMS
Peikko's JENKA family consists of nine different typesof standard threaded anchors providing a safe solution forall liftings. Anchoring is based on a rebar fastened toconcrete. Threaded systems leave a nice surface withoutlaborious finishing. You can use JENKA Lifting Devices atup to 90 degrees lifting angle.
46 Peikko Group Product Catalogue 02.02.2015
JENKA BSA
The very short JENKA BSA anchors are speciallly designedfor lifting very thin slabs and elements. By lifting withJENKA BSA a pull-angle up to 45° is allowed. The capacityand the thread system of the anchor is according to themarket standard. Special sizes and length - tailor madeproducts - are possible to produce
Approvals
RussiaRussia: POCC FI.AB28.H16302
CE MarkingCE Marking
Materials
JENKA anchors are produced under using a special grade steel for the sockets and high quality screws.
Dimensions
* Fs= Allowed load force from 0º - 45º(Note: A load force for a mass of 1 ton demands a force of approximately 10 kN)
47Peikko Group Product Catalogue 02.02.2015
JENKA CSA
JENKA CSA anchors are designed for lifting a wide range ofprecast elements. By lifting with JENKA CSA a pull-angleup to 90° is allowed. The capacity and the thread systemof the anchor is according to the market standard. Specialsizes and length - tailor made products - are possible toproduce.
Approvals
RussiaRussia: POCC FI.AB28.H16302
CE MarkingCE Marking
Materials
JENKA anchors are produced under using a special grade steel for the sockets.
Dimensions
48 Peikko Group Product Catalogue 02.02.2015
* Fs= Allowed load force from 0º - 45º* Fq= Allowed load force at 90º(Note: A load force for a mass of 1 ton demands a force of approximately 10 kN)
JENKA ESA
JENKA ESA anchors are designed for lifting a wide range ofprecast elements. By lifting with JENKA ESA a pull-angleup to 90° is allowed. The capacity and the thread systemof the anchor is according to the market standard
Approvals
RussiaRussia: POCC FI.AB28.H16302
CE MarkingCE Marking
Dimensions
* Fs= Allowed load force from 0º - 45º* Fq= Allowed load force at 90º(Note: A load force for a mass of 1 ton demands a force of approximately 10 kN)
49Peikko Group Product Catalogue 02.02.2015
JENKA PLA
JENKA PLA anchors are designed for lifting precastelements. By lifting with JENKA PLA a pull-angle up to90° is allowed. The capacity and the thread system of theanchor is according to the market standard. Special sizesand length - tailor made products - are possible toproduce.
Approvals
FinlandFinland: BY 5 B-EC 2 n:o 41RussiaRussia: POCC FI.AB28.H16302
CE MarkingCE Marking
JENKA PSA
JENKA PSA anchors are designed for lifting of slabs andthin precast elements. By lifting with JENKA PSA a pull-angle up to 45° is allowed. The capacity and the threadsystem of the anchor is according to the market standard.Special sizes and length - tailor made products - arepossible to produce.
Approvals
RussiaRussia: POCC FI.AB28.H16302
CE MarkingCE Marking
Materials
JENKA anchors are produced under using a special grade steel for the sockets and plates.
50 Peikko Group Product Catalogue 02.02.2015
Dimensions
* Fs= Allowed load force from 0º - 45º(Note: A load force for a mass of 1 ton demands a force of approximately 10 kN)
JENKA SRA
JENKA SRA anchors are designed for lifting a wide range ofprecast elements. By lifting with JENKA SRA a pull-angleup to 90° is allowed. The capacity and the thread systemof the anchor is according to the market standard. Specialsizes and length - tailor made products - are possible toproduce.
51Peikko Group Product Catalogue 02.02.2015
Approvals
FinlandFinland: BY 5 B-EC2 n:o 24RussiaRussia: POCC FI.AB28.H16302
CE MarkingCE Marking
Materials
JENKA anchors are produced under using BSt 500 S for rebars and a special grade steel for the sockets.
Dimensions
* Fs= Allowed load force from 0º - 45º* Fq= Allowed load force at 90º(Note: A load force for a mass of 1 ton demands a force of approximately 10 kN)
JENKA TF
JENKA TF anchors are designed for lifting a wide range ofprecast elements. By lifting with JENKA TF a pull-angle upto 90° is allowed. The capacity and the thread system ofthe anchor is according to the market standard. Specialsizes and length - tailor made products - are possible toproduce
52 Peikko Group Product Catalogue 02.02.2015
Approvals
FinlandFinland: BY 5 B-EC2 n:o 24RussiaRussia: POCC FI.AB28.H16302
CE MarkingCE Marking
Materials
JENKA anchors are produced under using BSt 500 S for rebars and a special grade steel for the sockets.
Dimensions
* Fs= Allowed load force from 0º - 45º* Fq= Allowed load force at 90º(Note: A load force for a mass of 1 ton demands a force of approximately 10 kN)
53Peikko Group Product Catalogue 02.02.2015
JENKA WAL
The WAL anchors can be used instead of SRA anchors if theanchoring length is limited. Wall elements and other largeelements can be lifted by WAL anchors. By lifting withJENKA WAL a pull-angle up to 90° is allowed. The capacityand the thread system of the anchor is according to themarket standard. Special sizes and length - tailor madeproducts - are possible to produce.
Approvals
RussiaRussia: POCC FI.AB28.H16302
CE MarkingCE Marking
Materials
JENKA anchors are produced under using BSt 500 S for rebars and a special grade steel for the sockets.
Dimensions
* Fs= Allowed load force from 0º - 45º* Fq= Allowed load force at 90º(Note: A load force for a mass of 1 ton demands a force of approximately 10 kN)
54 Peikko Group Product Catalogue 02.02.2015
JENKA WAS
JENKA WAS anchor is designed for lifting slabs and smallelements. By lifting with JENKA WAS pull angle up to 45°is allowed. The capacity and the thread system of theanchors is according to the market standard. Special sizesand length - tailor made products - are possible toproduce.
Approvals
RussiaRussia: POCC FI.AB28.H16302
CE MarkingCE Marking
Materials
JENKA anchors are produced using BSt 500 S for rebars and a special grade steel for the sockets.
Dimensions
* Fs= Allowed load force from 0º - 45º(Note: A load force for a mass of 1 ton demands a force of approximately 10 kN)
55Peikko Group Product Catalogue 02.02.2015
JENKA Lifting Devices
JENKA lifting devices are designed for lifting precastelements. By lifting with JENKA JL lifter a pull-angle up to 90° is allowed. Standard TLL are good forangle pull up to 45°. The capacity and the thread system of the lifting devices is according to themarket standard.
CE MarkingCE Marking
Dimensions
56 Peikko Group Product Catalogue 02.02.2015
JENKA Accessories
Peikko's range of products covers wide range of standardapplications. But also non standard solutions are available - do not hesitate to ask for your specialneed!
All standard applications - e. g. nailplates, recess formers etc. - are available. For aesthetic requirementsPeikko has patented stainless plugs for perfect look of elements. Special demands can also be solved byPeikko!
LIFTING ACCESSORIES
Peikko provides a wide range of different liftingaccessories for all lifting systems. Peikko's range of products covers a wide selection of standardapplications, e.g. nailing plates, recess formers, patented stainless plugs for a finished look of elements,and many more. Also tailored solutions are available.
Please do not hesitate to contact our sales!
57Peikko Group Product Catalogue 02.02.2015
TIES, LOOPS AND FIXING SOCKETS
PD Ties are used for joining sandwich wall panels togetherin a simple and energy-efficient way for the full height ofthe panel. A PPA Tie is used to tie the panels together atthe window or door opening beams. Each has standardmodels for insulation of up to 380 mm. PPI and PDQConnector Pins are used for joining panels togetherthrough a rebar mesh from the edges of the panels andwindow panes.
TS is a joint reinforcement in a box of galvanized sheetwith rebar anchoring for cast-in-situ joints. A narrowvariant is also available for prefabrication. PVL ConnectionLoops are used to tie the ends of wall panels together orto a column. PVL Connection Loops transfer the shearforces created from the stiffening of the building over thejoint from panel to panel.
Fixing sockets are female M-threaded fastening items,which are used for fixing points for temporary supports aswell as permanent fixings for small loads. Peikko Fixingsockets are available in black and stainless steel.
LOOPS
Peikko’s Loop Solutions are available for both precast andcast-in-situ structures. For precast structures ConnectingLoops are absolutely the easiest way to arrangereinforcement to precast wall panel joints. Fixing intomold is easy as well as connecting on site: Open the coverand bend the loop into operating position. Another quickand easy solution is to use Panel Connectors, which arelatch-type locking systems to connect wall panels. Installwalls and lock them to together with a ratchet key. Forcast-in-situ structures the ideal solution is the installationready Joint Reinforcement System.
58 Peikko Group Product Catalogue 02.02.2015
PVL Connecting Loop
PVL Connecting Loops are single wire loops for connectingprecast wall panels to each other, or to a column. PVLLoops make wall installation easy: just open the cover andbend the loop to operating position. Patented SWC willremain in bended position – easy to connect toreinforcement.
Standard wire lengths of 60 mm, 80 mm, 100 mm, 120 mmand 140 mm are available for joint depth range of 80 - 140mm. The box size is 160 x 50 x 22 mm.
Approvals
FinlandFinland: BY 5 B-EC 2 N:o 26 M1FinlandFinland: BY 5 B-EC 2 N:o 32 (PVL 140)
Materials
BoxBox: Galvanized Steel SheetWire Rope LoopWire Rope Loop: High Strength Steel EN 12385-4Pressed ferrulePressed ferrule: S355J0CoverCover: Tape
Dimensions
Resistances
Please refer to Technical Manual.
59Peikko Group Product Catalogue 02.02.2015
TS Joint Reinforcement
The TS Joint Reinforcement family contains variouselements designed for varying use. TSA Jointreinforcement is an element where the loops are concretedto the first part of the structure (from the element). InTSK Joint Reinforcement, straight rebars are concreted tothe first casting, the loops pointing out to the secondone. TSA 42 Joint Reinforcement is designed for narrow(thin) walls.
Approvals
RussiaRussia: POCC FI.AB52.H31911
Materials
BoxBox: Galvanized sheet metalRebarsRebars: A500HW / B500B / BSt 500 S
60 Peikko Group Product Catalogue 02.02.2015
Dimensions
Sizes TSA 10-150-85TSA 10-150-85 and TSA 12-150-115TSA 12-150-115: box depth H = 50 mm.
61Peikko Group Product Catalogue 02.02.2015
TENLOC Panel Connector
TENLOC is a latch-type Panel Connector which is used toquickly create connections between precast elements. Thesystem consists of a latch part and anchor part. The latchis tightened into the anchor part with a ratchet key. Onsite, concrete elements with latch parts and concreteelements with anchor parts are erected into the correctposition and locked into each other by a pair of TENLOCPanel Connectors. Precast vertical connections arefinalized by grouting the latch boxes. In addition, TENLOCcan be used to connect parapets to façades, walls tocolumns, and slab elements to each other.
Dimensions
TIES AND PINS
Complete connection between outer and inner panel ofyour sandwich wall. Multiple Tie solutions which can befinalized with Pins where needed.
62 Peikko Group Product Catalogue 02.02.2015
PD Diagonal Ties
Ties are connecting reinforcement which allows the joiningof sandwich wall concrete panels together. Sandwich wall'sdesign is based on logic that outer panel's self weight ishung with ties and connectors into inner panel.
PD diagonal ties are designed to join sandwich panel'sconcrete layers together from full height of the panel.
PD diagonal tie is used in sandwich panel walls. Outer/inner bars are black or stainless while diagonal isstainless. Selection covers panel insulation thicknessesfrom 100 to 390 mm. Wall heights up to 3 meters andwidths up to 6 meters, for larger surfaces contact PeikkoTechnical Support.
Approvals
FinlandFinland: BY 5 B N:o 335FinlandFinland: BY 5 B-EC2 N:o 16RussiaRussia: POCC FI.AB28.H16302
Materials
DiagonalDiagonal: Stainless steelInner and outer barInner and outer bar: Black or stainless reinforcement steel depending on configuration, see TechnicalManual in Instructions and specifications.
63Peikko Group Product Catalogue 02.02.2015
Dimensions
T* = Recommended Insulation Thickness
Resistances
See Technical Manual in Instructions and Specifications
64 Peikko Group Product Catalogue 02.02.2015
PPA Opening Ties
PPA beam ties can be used in low structures e.g. door andwindow beams and also in low socle elements. Made of 5mm stainless steel wire.
PPA is used in sandwich wall panels, above the window oranother opening. It is used together with PD Ties, and canbe used independently in low socle elements. Black/stainless outer/inner bars while diagonal is stainless.Insulation thicknesses from 100 to 390 mm
Approvals
FinlandFinland: BY 5 B N:o 335FinlandFinland: BY 5 B-EC2 N:o 16RussiaRussia: POCC FI.AB28.H16302
Materials
Ø 5 mm stainless reinforcement steel
65Peikko Group Product Catalogue 02.02.2015
Dimensions
T* = Recommended Insulation Thickness
Resistances
Vertical characteristic resistance NRky 1,5Vertical design resistance NRdy 1,1
66 Peikko Group Product Catalogue 02.02.2015
PPI Connector Pins
PPI and PDQ connector pins are used to connect theconcrete panels of the sandwich wall together. Theconnector pins can be used for polyurethane or EPSinsulated sandwich panels, panels where footing orfoundation carries the outer concrete panel and in edgesof the panels as an additional tie.
Connector pin requires 50 mm anchoring depth. Anchoringdepth is ensured by installing the pin through insulationup to the limiter in the pin. Covers insulation thicknessesfrom 80 mm to 360 mm. Minimum connector pin length is90 mm + insulation thickness. To prevent the warping ofthe outer concrete panel the row of first pins must belocated less than 150 mm from the edge of the panel. One pin is located and installed at every corner.
Approvals
FinlandFinland: BY 5 B n:o 336 (national)FinlandFinland: BY 5 B-EC 2 n:o 17 (EC2-NA)RussiaRussia: POCC FI.AB28.H16302
Resistances
Concrete strength ≥ C25/30:Characteristic tensile resistance NRck 7,0 kNResistance value NRcd 3,5 kN
FIXING SOCKETS
Peikko provides fixings that are designed and producedunder strict quality control and from high performancematerials, galvanized or stainless steel, to guarantee thehighest possible safety. Peikko's fixings ensure maximumsafety. Fixings are available in various sizes and variations,even with pre-installed bolts.
67Peikko Group Product Catalogue 02.02.2015
PUNCHING PREVENTION SYSTEMS
PSB Reinforcement is designed to prevent punching failureof cast-in-situ slabs from around columns. PunchingReinforcement is an efficient industrial reinforcementwhich replaces the traditional stirrup reinforcement. It isfast and easy to install in the reinforcement.
The punching reinforcement capacity is defined inaccordance with the Eurocode. The Peikko Designer;Punching Reinforcement module enables simple andreliable dimensioning for slab punching.
PUNCHING AND SHEAR REINFORCEMENTSYSTEM
The Peikko Punching Shear Reinforcement systems enablesimple installation of the floor slabreinforcement without spacers, as the system is installedon top or with spacers under the main reinforcement. ThePunching Shear Reinforcement is used in reinforcedconcrete floor slabs that are cast directly onto columns orwalls without outriggers. The system increases thepunching shear capacity of the floor by as much as 96 %.The system is applicable to floor thickness starting from 18cm. The PSB Reinforcement System facilitatesreinforcement work compared to traditional reinforcementstirrup assembly.
Peikko’s PSB Punching Reinforcement System is ETA approved as of April 2013.
PSB Reinforcement System
PSB Rails are basically used for two different ApplicationPSB Rails are basically used for two different ApplicationCases:Cases:
1. Punching Reinforcement ("PSB"):1. Punching Reinforcement ("PSB"):The Peikko PSB punching reinforcement is a powerful andeconomical solution of the punching reinforcement issuein punctiform supported in-situ and precast flat slabs,ground slabs and footings with concentrated loadinduction.
68 Peikko Group Product Catalogue 02.02.2015
2. Shear Force Reinforcement ("PSB-S"):2. Shear Force Reinforcement ("PSB-S"):According to DIN 1045-1:2008-08, shear force load bearing capacity must be demonstrated for eachcross section of reinforced concrete building elements. As the load bearing capacity of non-reinforcedcross sections was significantly lowered vs. old DIN 1045:1988-07, shear force reinforcement is usedmore and more often in ceiling and foundation slabs.
Dimensioning:Dimensioning:PSB punching reinforcement is dimensioned according to various approvals (ETA 13/0151, GermanZ-15-1-231, Poland AT-15-7688/2008...). Therefore we recommend our user-friendly dimensioningsoftware Peikko Designer. Download it from Peikko’s Software Page. Please contact our local TechnicalSupport at any time for information or dimensioning questions.
Design variants:Design variants:
PSB typePSB typeDouble headeds studs, assembled by a flat bar as spacing bar. Applicable for top and bottominstallation. Available 2 and 3- System elements or as Complete elements (2-10 and more stud rail).
PSB-F typePSB-F typeConsists of a set of components: Double headed studs connected by preassembled plastic connectors toa flat bar as spacing bar having slotted holes in it. Applicable for element slabs and preferable as spacesaving stock solution. Available as 2- and 3- System elements.
69Peikko Group Product Catalogue 02.02.2015
Installation variants:Installation variants:
Cast-in-situ concrete variant for top-installation.Cast-in-situ concrete variant for top-installation. For floor systems in cast-in-situ concrete, top-installation of the PSB elements is recommended. Due to that the entire remaining slab reinforcementcan be installed prior to installation of the punching reinforcement elements. By means of using a crossconnectors the proper mounting position can be ensured.
Bottom installation variantBottom installation variant. As alternative to the installation from the top, it is also possible to installPSB punching reinforcement elements from the bottom by means of Peikko spacers available forconcrete coverings from 15-45 mm prior to installing the slab reinforcement.
Precast variant.Precast variant. The multi-component type PSB-F for the use in precast factories. The partial structureenables the easy and fast installation of the punching reinforcement in the preferred phase of theautomated production process without disturbing it. PSB-F rails are mounted by means of Peikko PSBspacers (available for concrete coverings from 15-45mm) in required height on the shuttering table indefined positions marked by the plotter. Lower bending reinforcement and the lattice girders can bepositioned freely by reinforcement robot. The reinforcement work is easy, as the studs are not yet inplace. When reinforcement process is complete the required PSB-F studs are easily clicked on the rails inpredefined positions. The slotted holes on the rails offer assembly tolerance to ensure the properinstallation of the studs.
70 Peikko Group Product Catalogue 02.02.2015
Approvals
PSB:PSB:
ETAETA: ETA-13/0151 (en, de, pl)Czech RepublicCzech Republic: 060-033529, 060-033530GermanyGermany: Z-15.1-231HungaryHungary: A-744/1/2007PolandPoland: AT-15-7688/2008 + Aneks nr 1SlovakiaSlovakia: TO-09/0114
PSB-S:PSB-S:GermanyGermany: Z-15.1-267
CE MarkingCE Marking
Materials
Double-headed studs are made from concrete reinforcement steel B500B (according to EN 10080, DIN488) and available in diameters 10, 12, 14, 16, 20,25, 28 and 32 mm. ETA-13/0151 approves the use ofPSB elements with diameters 10, 12, 14, 16, 20 and 25 mm. Elements using studs with larger diameters(28 mm and 32 mm) can be produced as well but are not within the scope of ETA-13/0151. Theassembly bar consists of structural steel S235 or B500B. Each PSB punching reinforcement component isindividually manufactured according to the static requirements. Besides in case of PSB-F type. It isspecially developed as multi-component type for stock solution in order to ensure the best flexibility.
Resistances
Please refer to Technical Manual.
CUBO Column Caps
CUBO Column Caps are available in four different standarddesign types depending on the arising punching loads andthe location of the column. They are calculated accordingto the static requirements.
Standard design variantsStandard design variants
71Peikko Group Product Catalogue 02.02.2015
1. CUBO-N1. CUBO-NNormal type for internal columns
2. CUBO-H2. CUBO-HH-type for higher punching resistance and internal columns
3. CUBO-D3. CUBO-DDouble-type for high punching resistance and internal columns
4. CUBO-E4. CUBO-EEdge-type for edge columns
Materials
S355 J2+N (Norms: SIA 262,263)
72 Peikko Group Product Catalogue 02.02.2015
FLOORING PRODUCTS
Peikko floor joint systems offer the best practical andtechnical solution for today's high quality concrete floorslabs. The system allows fast casting of the floor, givesexcellent load capacity, and minimizes cracking. Enjoylong lasting, trouble free floors for the entire life time ofthe building.
FREE MOVEMENT JOINTS
Peikko Floor Joints speed up floor construction and helpscontrol cracking in concrete slabs. The round dowels in thefloor joints transfer loads from one slab to another. Floorjoints are recommended, for example, in industrial,warehouse and sales outlet buildings with forklift traffic.
The floor joints act as leave-in-placeformwork. They alsoenable simultaneous concreting of larger areas.
METAFORM Free Movement Joint
The METAFORM system enables us to build several versionsof free movement joints according to application type andenvironment, utilizing basic METAFORM formwork which isavailable in different heights, with any of our load transfersystems and snap in installation feet. METAFORM isproduced by roll forming from high tensile galvanized steelto resist corrosion. The load transfer system is attached tothe formwork by plastic connection elements.
The system ensures reliable load transfer at joints withopenings of up to 20 mm wide and is suitable to use onslab depths from 125 mm to 250 mm, mainly for areas withrubber and pneumatic tyre traffic.
Four distinct types of prefabricated free movement joints can be built, by utilizing the components ofthe system:
73Peikko Group Product Catalogue 02.02.2015
METAFORM (Single Rail)METAFORM (Single Rail) METAFORM DUOMETAFORM DUO
METAFORM DUO SSMETAFORM DUO SSMETAFORM DUO EXMETAFORM DUO EX
METAFORM can be supplied with different types of plate dowel systems at different geografical markets:
• TDC 5TDC 5, TDC 6TDC 6, TDR 6TDR 6 and UDR 8UDR 8 – Europe, Russia• TDR 6TDR 6 and UDR 8UDR 8 – UK, Gulf, APAC, USA
ApplicationApplication
Please refer to Technical Manual.
Approvals
RussiaRussia: POCC FI.AB28.H16302
Materials
74 Peikko Group Product Catalogue 02.02.2015
Dimensions
75Peikko Group Product Catalogue 02.02.2015
76 Peikko Group Product Catalogue 02.02.2015
77Peikko Group Product Catalogue 02.02.2015
Resistances
Please refer to Technical Manual.
78 Peikko Group Product Catalogue 02.02.2015
TERAJOINT Free Movement Joint
TERAJOINT is the industry standard in the range ofprefabricated heavy-duty movement joint systems, suitablefor all large-area construction methods for ground-bearingand pile-supported concrete floors. The cold-drawn steelrails provide extremely durable protection to the slabarrises, making it ideal for floors in a heavy-duty trafficenvironment.
The system ensures reliable load transfer in formed free-movement contraction joints with openings of up to 20mm wide, and suitable for slab depths from 100 mm to 300mm.
It is available in Plain Steel, Hot Dip Galvanized Finish or Stainless Steel versions.
The TERAJOINT permits free slab movements caused by drying shrinkage and thermal variations in bothlongitudinal and perpendicular directions of the slab plane, transfers vertical loads between adjacentslabs, and minimizes vertical displacement of the slabs. The load transfer system is accomplished usingdiscrete plate dowels made from high-strength steel, moving within rigid plastic release sleeves.
TERAJOINT can be supplied with different types of plate dowel systems at different geografical markets:
TDC 6TDC 6 and UDR 8UDR 8 – Europe, RussiaTDR 6TDR 6 and UDR 8UDR 8 – UK, Gulf, USATJD-R6TJD-R6 and TJD-R12TJD-R12 - APAC
Approvals
HungaryHungary: A-154/2009RussiaRussia: POCC FI.AB28.H16302
Materials
HDGHDG = hot dip galvanized. Standard for black steel is EN 10025 and EN 10088 for stainless.
79Peikko Group Product Catalogue 02.02.2015
Dimensions
80 Peikko Group Product Catalogue 02.02.2015
D*D* = Advisable Floor Slab Depth
Resistances
Please refer to the Technical Manual.
SCREED RAILS
Versatile Screed Rail Systems and basic free-movementjoint formworks provide a guide for the screeding mechanism for application of screed layers. They alsoenable the construction of basic contraction- and expansion-formed free-movement formed jointswithout arris protection.
81Peikko Group Product Catalogue 02.02.2015
UNIRAIL Screed Rail
UNIRAIL 40-60 and 70-120 are a cost-efficient screed railsystem produced by precision forming from galvanizedhigh-strength steel, providing excellent dimensionaltolerances and stability during screeding operation. It issuitable for internal and external applications.
The system consists of the basic UNIRAIL 40-60 ScreedRail. The UNIRAIL model 70-120 can be created by addinginstallation feet to the UNIRAIL 40-60. The UNIRAIL70-120 enables the depth of the screed to be continuouslyadjusted up to 120 mm.
UNIRAIL 40-60 and 70-120 provide a guide for thescreeding mechanism, which can be a manually operated straight edge, vibrating screed machine withstriker tubes. The UNIRAIL 40-60 and 70-120 permit the accurate passage of the screeding mechanismalong their length, and the screed material placed between the rails is accurately leveled off to thecorrect height and flatness.
A plastic top extender can be fitted to the top edge of the rail to provide a smooth, non-abrasiverunning face for any screeding mechanism and also to increase the overall height of the UNIRAIL 40-60or 70-120.
Materials
82 Peikko Group Product Catalogue 02.02.2015
Dimensions
UNIFORM Screed Rail
UNIFORM 140 is a prefabricated leave-in-place formworksystem designed for constructing free-movement joints orrestrained-movement joints in concrete slabs and deep-section screeds, consisting of permanent formwork, a loadtransfer system, a top extender, and adjustableinstallation feet. The formwork is produced by roll formingfrom galvanized high-tensile steel. The load transfersystem is attached to the formwork by plastic connectionelements.
The system ensures reliable load transfer at joints withopenings of up to 15 mm wide and is suitable for use onslab depths from 150 mm to 180 mm when used to formcontraction joints in concrete slabs and screeds. For expansion joint construction, it is suitable for slabdepths from 150 mm to 200 mm.
The UNIFORM 140 system can be supplied as a fully assembled ready-to-use product, or in kit form, forsimple assembly at the work site. The kit includes all of the required components, assembly tools, andassembly instructions.
The UNIFORM 140 permits free slab movements caused by drying shrinkage and thermal variations inboth longitudinal and perpendicular directions of the slab plane. It also transfers vertical loads betweenadjacent slabs and minimizes vertical displacement of the slabs. The standard, dedicated load transfersystem is accomplished by utilizing discrete plate dowels made of high-strength steel, moving withinrigid plastic release sleeves. The UNIFORM 140 formwork also allows the use of alternative load transfersystems, such as round- and square-bar dowels of up to 20 mm format, or tie bars for formingrestrained-movement and tied joints.
83Peikko Group Product Catalogue 02.02.2015
Dowel typesDowel types
UNIRAIL is supplied with different types of plate dowel systems at different geografical markets:
• TDC 5TDC 5 and TDC 6TDC 6 – Europe, Russia• TDR 6TDR 6 – UK, Gulf, APAC, USA
Materials
Dimensions
84 Peikko Group Product Catalogue 02.02.2015
PERMANENT JOINT FILLERS
Permanent Joint Fillers are systems for filling joint gaps inconcrete floors. This system instantly replaces the traditional joint fillers used in concrete floors andslab joint gaps. It also removes the need to reseal joints, minimizes floor downtime, and improvesresistance to damage at the joint arrises.
85Peikko Group Product Catalogue 02.02.2015
JOINTSAVER Permanent Joint Filler
The JOINTSAVER is placed on the joint gap undercompression and it pushes at the side of the joint gap.Therefore, as the gap widens, the compressed JOINTSAVERwill expand to remain in contact with the sides, therebypermanently filling the joint gap. The JOINTSAVER comesin several types and sizes, and can be used for joint gapsfrom 10 mm up to 40 mm wide, whether they be formedconcrete slabs, formed steel armored joints, internal orexternal joints, and also architecturally decorative joints.
The special compressible closed-cell foam center strip hashigh regenerative properties and excellent resistance tomost contaminants usually found on floors, such as oils,petrol, solvent, acids, and U.V. light, as well as being fire retardant.
The JOINTSAVER is suitable for applications such as internal and external free-movement joints, coldstore joints, seismic joints, concrete arris repairs, and decorative applications. The joint can be instantlytrafficked by foot, pallet trucks, and fork trucks.
The JOINTSAVER range consists of 3 types of products serving different joint gap widths andapplications: the JOINTSAVER Standard, the JOINTSAVER Extra Wide, and the JOINTSAVER Gripper.
Materials
86 Peikko Group Product Catalogue 02.02.2015
Dimensions
LOAD TRANSFER SYSTEMS
Dowel Systems provide high efficiency load transferfunctionality through the joint at formed and sawn free-movement contraction joints.
87Peikko Group Product Catalogue 02.02.2015
TERADOWEL and ULTRADOWEL Load Transfer Systems
The TERADOWEL and ULTRADOWEL systems comprisediscrete steel-plate dowel and plastic release sleeves. Thesleeve contains nails for fixing to the timber formwork andthe dowel slot is covered by tape to prevent cement pasteentering when the concrete is poured. The inner bracingsin the sleeve prevent deformation or collapse of thehorizontal sleeve walls caused by the concrete pressure indeep slabs and allow problem-free insertion of the dowelinto the sleeve after formwork stripping.
The TERADOWEL or ULTRADOWEL Sleeves are installed intoposition on the timber formwork at specific intervals andat a height of half of the slab depth, before the formworkis installed and the slab is cast. The slab containing the sleeves is poured and, after the concrete hashardened sufficiently, the timber formwork is stripped. TERADOWELS or ULTRADOWELS are then insertedinto the slots of the cast-in sleeves and the second pour is performed.
TERADOWELS and ULTRADOWELS permit free slab movements caused by drying shrinkage and thermalvariations in both longitudinal and perpendicular directions of the slab plane, thereby eliminating theprinciple cause of shrinkage cracks at the joint, and minimizing vertical displacement of the slabs.
The available models are the following in different geografical markets:
• TERADOWEL TDC 6TDC 6 and ULTRADOWEL UDR 8UDR 8 – Europe, Russia• TERADOWEL TDR 6TDR 6 and ULTRADOWEL UDR 8UDR 8 – UK, Gulf, APAC, USA
Materials
88 Peikko Group Product Catalogue 02.02.2015
Dimensions
Resistances
Please refer to the Technical Manual.
DOWELCRADLE Load Transfer System
DOWELCRADLEs are designed for use in concrete slabs orpavements where a sawn or other induced free movementcontraction joints are required to be created. Dowels andsleeves are held by the cradle, aligned and suspended inposition, in the middle of the slab at required dowelspacing, thereby ensuring correct positioning andalignment of the individual dowels and sleeves. Alsoallows extremely quick and simple to installation of thesystem by one person.
The system is suitable for internal and external slabs withdepths from 125 mm to 250 mm slab depths. Other sizescan be designed according to requirements of the client. Itis available in Plain Steel and Hot Dip Galvanized finish.
DOWELCRADLE with round bar dowels permits one directional slab movement. The load transfer system isaccomplished by utilising high strength steel round bar dowels, moving within thin plastic shrink wrapsleeves.
89Peikko Group Product Catalogue 02.02.2015
DOWELCRADLE with flat plate dowels permits two directional slab movement both in longitudinal andperpendicular directions of the slab plane, and minimising vertical displacement of the slabs. The loadtransfer system is accomplished by utilising high strength steel discrete plate dowels, moving withinrigid plastic release sleeves.
DOWELCRADLEs are supplied at APAC market.
Materials
Dimensions
90 Peikko Group Product Catalogue 02.02.2015
Resistances
Please refer to Technical Manual.
91Peikko Group Product Catalogue 02.02.2015
HIDDEN CORBELS
The PCs Corbel system provides support to steeland composite beams and to concrete beams equippedwith PC Beam Shoes and transfers their support reactionsto concrete walls and columns. A light corbel system issuitable for supporting walls and intermediate landing ofstaircases both in cast-in-situ and precast frames.
COLUMN CORBELS
Peikko PCs Hidden Corbel is composed of a columncomponent to be installed in the column and an adjustablebolted bracket. The system, offering superior on-siteadjustability, enables straight precast molds. Peikko PCsCorbels are used in precast concrete beams with PC BeamShoes. The system also suits steel beams and compositebeams with suitable end plates. This hidden column corbelsystem is a natural partner for Deltabeam.
High connection resistance can be achieved with smallcross sections.
PCs Corbels
PCs Corbels are designed for connecting different kinds ofbeams: precast concrete, steel, or composite beams, tocolumns or walls. The system enables connecting as manybeams to the columns as the cross section allows.
PCs Corbels are cast in the middle of the column or walland PC UP Corbels to the upper part of the same. Use PCLOCK for safe continuous beam installation on site.
92 Peikko Group Product Catalogue 02.02.2015
Approvals
DenmarkDenmark: Statement, use of PCs Corbel in DenmarkFinlandFinland: BY 5 B N:o 342 (national)FinlandFinland: BY 5 B-EC 2 N:o 25 (EC2-NA)PolandPoland: AT-15-7911/2009 + Aneks nr 1RussiaRussia: POCC FI.AB28.H16302
Materials
Dimensions
93Peikko Group Product Catalogue 02.02.2015
Resistances
Please refer to Technical Manual in Instructions and specifications.
PC Beam Shoes
PC Beam Shoes are used as the counterpart for PCCorbels for easy installation of both prestressed and non-prestressed precast concrete beams to columns. There aretwo different models: Low for beam flange heights < 60mm and High for > 60 mm.
Approvals
FinlandFinland: BY 5 B N:o 334 (national)FinlandFinland: BY 5 B-EC 2 n:o 15 (EC2-NA)PolandPoland: AT-15-7911/2009
Materials
94 Peikko Group Product Catalogue 02.02.2015
Dimensions
95Peikko Group Product Catalogue 02.02.2015
Resistances
Resistances according to corresponding PCs Corbel.
SLAB CORBELS
PBH Corbels, easily dimensioned with design tables, areessential steel assemblies allowing TT slabs, hutchplatesand ancillary beams to be placed on supporting beamswithout the necessity of girder flanges or notched ends.Furthermore, no additional installation or assemblysupport is needed.
PBH Corbels
The PBH assembly mainly consists of two vertical steelplates mutually connected by bearing plates and top platesto create a horizontal steel beam of open cross sectionbridging the gap between the head of a TT slab and thegirder. During istallation state, the dead loads of theprecast concrete element and the in situ topping arecarried by the PBH corbel and transfered from the TT-slabto the supporting structure. In final state, when the insitu topping is hardened, the PBH corbel and the concreteslab provide a certain share of the total capacity of theconstruction. The total capacity of the construction resultsfrom the bearing capacity of the PBH corbel in installationstate and the bearing capacity of the slab.
Approvals
GermanyGermany: S-N/110135RussiaRussia: POCC FI.AB28.H16302
96 Peikko Group Product Catalogue 02.02.2015
Materials
The construction provides a fire resistance of 90 minutes.
Dimensions
Resistances
Please refer to Technical Manual.
97Peikko Group Product Catalogue 02.02.2015
HANGERS
The PETRA Hollow-core Slab Hanger is used to support ahollow-core slab in the slab opening. PETRA is generallysupported by two parallel slabs, and one or more slabs areinstalled onto its front plate. The joint between thehollow-core slabs and PETRA should be cast before anyload is put on the structure. The beam formed by PETRAand the grouting transfers loads from the slab that needsto be supported to supporting slabs.
HOLLOW-CORE SLAB HANGERS
PETRA Slab hanger is a steel plate structured hanger for ahollow-core slab that needs to be supported between themain support points. The hanger is used for makingopenings of any size into a hollow-core slab floor. PETRAdistributes the load of the slab into the adjacent slabs.Standard sizes are available up to slab thickness of 500mm. Up to 10 m spans are easily supported with standardPETRAs.
PETRA
PETRA and PETRA Strong slab hangers are designed tosupport hollow-core slabs up to 500 mm thick formaking openings.
Special models available for hollow-core slabs withbathroom recesses and for cases where adjacent slabs areof different height.
98 Peikko Group Product Catalogue 02.02.2015
Approvals
DenmarkDenmark: Statement, use of PETRA in DenmarkFinlandFinland: BY 5 B N:o 340 M1 (RakMk)FinlandFinland: BY 5 B-EC 2 N:o 20 M1 (EC2-NA)PolandPoland: AT-15-5360/2012
Materials
Dimensions
PETRA Slab Hangers are configured upon order. Please refer to the above naming instruction or the moredetailed Technical Manual under Instructions and specifications.
Resistances
Please see Technical Manual in Instructions and specifications.
99Peikko Group Product Catalogue 02.02.2015
REBAR COUPLING SYSTEMS
MODIX Rebar Coupler is a pressed coupling system withthreaded connection for rebar coupling. Threaded muffsare pressed to each bar for coupling. Loads are transferredvia the muff threads from one bar to the next.
Rebar splicing can be avoided with rebar couplers and, ifneeded, all bars can be continued at the same crosssection. The connection is easy to install and does notrequire special tools. Proper connection tightness can beinspected visually.
REBAR COUPLERS
MODIX is a very safe and versatile rebar splicing system.The unique visual inspection system makes it easy toensure that all connections are closed. Using the standardSM A and SM B connections, you can connect together anyrebars from size 10 to 40 mm.
100 Peikko Group Product Catalogue 02.02.2015
MODIX Couplers
Peikko MODIX is designed to be the most safe and flexiblerebar splicing system. The unique visual inspectionsystems makes it safe and easy to be sure all connectionsare really closed. With the standard connections SMA andSMB you can connect all rebars from size 10 to 40 mm.
Approvals
AustriaAustria: ÖTZ-2012/002/6FinlandFinland: BY 4 B N:o 23GermanyGermany: Z-1.5-177HungaryHungary: A-739/2009NetherlandsNetherlands: K22892PolandPoland: AT-15-8087/2013RussiaRussia: RU.MCC.142.313.28277
Materials
MODIX muffs are produced under using a special grade steel for the muffs.
101Peikko Group Product Catalogue 02.02.2015
BALCONY CONNECTIONS
Balcony connectors are used for connecting balconies tothe other structures of a building. PS Balcony SlabConnector anchors the supported balcony slab to thestructures allowing vertical movement due to heat. Thestructure can be disassembled, which enables an on-sitebolted connection. The P4X Slab Connector is used toinstall a railing firmly to a balcony. A concrete parapetwith extensive adjustment possibilities can be achieved bycombining a slab connector and a parapet connector.
Peikko NIRO, an insulated cantilever balcony connector, isa solution for cantilever concrete balconies. Peikko NIROcan be cast on site into cast-in-situ structures, or to thebalcony slab at the precasting factory and later to thefloor of the building at the site.
CANTILEVER SLAB CONNECTORS
Cantilever Slab Connectors are steel reinforcementcomponents with integrated insulation to eliminate coldbridging. These slab connectors are used for transferringloads from the balcony slab to the floor slab.
102 Peikko Group Product Catalogue 02.02.2015
NIRO Connector
Peikko NIRO insulated Cantilever Balcony Connectors aredesigned to support cantilever balconies. It is designed forslabs from 160 mm thicknesses upwards. Standard modelhas F90 fire protection, and stock lengths are 1040 mmand 540 mm.
Separate models for in situ cast floor slabs and precastfiligran slabs and precast planks.
Approvals
FinlandFinland: BY 5 B-EC 2 N:o 88RussiaRussia: РОСС RU.AB28.H15332
Materials
103Peikko Group Product Catalogue 02.02.2015
Dimensions
104 Peikko Group Product Catalogue 02.02.2015
105Peikko Group Product Catalogue 02.02.2015
Resistances
Design forces according to EC.
SUPPORTED SLAB CONNECTORS
Peikko's Supported Slab Connectors are hinged stainlesssteel components. They enable vertical movement ofbalconies thus preventing cracking. Simultaneously, theytransfer horizontal loads via a hinge from balcony slabs toconcrete floors. Easy installation by a bolt connection.
106 Peikko Group Product Catalogue 02.02.2015
PS Balcony Slab Connector
PS Balcony Slab Hinge transfers horisontal loads frombalcony to the building, while enabling verticalmovements up to 20 mm. Variable sizes to fit most wallstructures. One balcony requires normally two hinges.
Approvals
FinlandFinland: BY 5 B-EC 2 n:o 35 (EC 2 NA)FinlandFinland: BY 5 B n:o 353 (National)RussiaRussia: POCC FI.AB28.H16302
Materials
PlatesPlates: 1.4301SleeveSleeve: 1.4301Ribbed barsRibbed bars: B600KX
Dimensions
107Peikko Group Product Catalogue 02.02.2015
BALCONY PARAPET CONNECTORS
Peikko's parapet balcony connector is an anchoring systemfor safe fixing of the parapet wall to the balcony slab. Itcan be used with concrete, steel or glass parapets and itprovides a rust-free connection without welding.
P4X Balcony Parapet Connectors
With P4X parapet connection, the reinforced concreteparapet is fastened to reinforced concrete balcony slab.P4X is also used with glass parapets/balcony glazingaccording to glass parapet producer details. The parapetpart has screws in which the parapet is stiffened againstthe balcony slab.
Approvals
FinlandFinland: BY 5 B n:o 344
108 Peikko Group Product Catalogue 02.02.2015
DELTABEAM
DELTABEAM is a superior slim-floor system for multi-storeybuildings of any type from low-rise to high-rise. Itscomposite action between steel and concrete allows forcreative structures with large open spaces. DELTABEAM hasproven through multiple fire tests its excellent ability toresist fire without any additional protection. Its shallowdesign decreases the building’s floor-to-floor height alongwith eliminating conflicts with HVAC systems.DELTABEAM has been used in concrete and steel structuresin over 10,000 buildings worldwide.
DELTABEAM WITH PRECAST FLOORS
Get the best out of precast floors with compositeDeltabeam allowing for frame grid area up to 12 m x 12m and 8 m x 16 m. A light structure, Deltabeam is easyand fast to install together with other elements. Save upto 500 mm in story height and reduce the volume of thebuilding with Deltabeam for energy efficiency! Ideal foroffices, schools, hospitals, office buildings, hotels and carparks. Peikko's Deltabeams are CE marked.
109Peikko Group Product Catalogue 02.02.2015
DELTABEAM WITH COMPOSITE FLOORS
Together with a composite floor, Deltabeam provides anenergy efficient solution by reducing the volume of thebuilding. Required rebars and HVAC and electricity pipingare easy to pass through the web holes in the beam beforethe slabs are cast. After cast-in-situ, Deltabeam forms asmooth structure together with the various compositeslabs. Use Deltabeams with steel decking, filigran typefloors or cast-in-situ. Compared to traditionalfloor structure, Deltabeam saves up to 500 mm in storyheight! Peikko's Deltabeams are CE marked.
DELTABEAM WITH CAST-IN-SITU FLOORS
Deltabeam can also be used with on-site casting ofconcrete floors. In these cases Deltabeam should be ratherstraight than precambered. The formwork should be placedjust under the bottom flange of the beam. In cases of longspans Deltabeam can alternatively be placed under thebottom surface of concrete floor. Peikko's Deltabeams areCE marked.
Deltabeams make slim floors possible also in cast-in-situconstruction!
DELTABEAM IN RENOVATION
Use DELTABEAM for building completely new floorstructures in existing buildings or for rebuilding an old structure. Thanks to its lightness, DELTABEAM isthe ideal solution for adding more stories to a building. It helps to minimize the total structural weightand enables construction-phase transfers using only forklifts. The low-height DELTABEAM makes it easyto adapt the building's story height to the level of the stories of the adjacent buildings. Peikko'sDELTABEAMs are CE marked.
110 Peikko Group Product Catalogue 02.02.2015
DELTABEAM INFO FOR DESIGNERS
To make the designing of DELTABEAMs easier, we havecollected information for designers on our website atwww.peikko.com. On our website, you will find a technicalmanual, installation instructions and a connection detaillibrary for preparing drawings. In case of any problems,our Technical Assistance will be happy to help youregarding DELTABEAMs. Peikko's DELTABEAMs are CEmarked.
DELTABEAM product information
DELTABEAM is designed to be used as a structural elementcombined with all general concrete slab types: hollow-coreslab, filigran slabs, composite steel decking, trapezoidalsteel decking slabs, and cast-in-situ concrete slabs. Itenables the usage of shallow element structures andstrengthens the frame structure inside the slab.
DELTABEAM can have a fire class rating as high as R120without additional protection.
111Peikko Group Product Catalogue 02.02.2015
Approvals
CzechCzech: 204/C5/2006/060-025293 / 060-025292FinlandFinland VTT-RTH-03040-07 (fi, en)GermanyGermany: Z-26.2-49HungaryHungary: A-702/2010PolandPoland: AT-15-8053/2014RussiaRussia: POCC FI.Aг93.н00522SlovakiaSlovakia: TO - 08/0021SwedenSweden: SBS D/002UKUK: BBA No 05/4204
CE MarkingCE Marking
Materials
112 Peikko Group Product Catalogue 02.02.2015
Dimensions
*standard size unless the customer otherwise defines (minimum 20 mm).**c/c distribution for web holes is always 300 mm.
113Peikko Group Product Catalogue 02.02.2015
STEEL STRUCTURES
Peikko Structural Frame is a composite construction frameconsisting of Deltabeams and composite columns. It is eminently suited as a frame for office andcommercial buildings as well as public buildings.
We can assemble the delivery to meet the customer's requirements from designing the frame toinstallation.
Peikko Frame systems provide customers with several benefits:Peikko Frame systems provide customers with several benefits:
Composite actionComposite action
A true composite construction frame enables slender and light structural solutions that provide savingsin volume and costs.
On-site savingsOn-site savings
Standardized and clear connection details allow for fast and easy frame installation, providingconsiderable savings in time.
PlanningPlanning
Through our own planning and standardized connection solutions, we are able to make the correctpreselections and create an efficient planning schedule.
Competitive priceCompetitive price
Modern production technology combined with a correctly optimized frame solution enables acompetitive price.
QualityQuality
Our products and production plants are subject to external inspectorates. A quality manual is included inour delivery. Peikko's Steel Structures are CE marked.
114 Peikko Group Product Catalogue 02.02.2015
PEIKKO GROUP CORPORATION:GENERAL TERMS ANDCONDITIONS OF SALE 2011-2012
1. Applicability
These general terms and conditions of sale shall be applied to deliveries of Products to the Customer.“Peikko” shall mean Peikko Group Oy or a company belonging to the same group with Peikko Group Oy.“Product(s)” shall mean products sold or offered by Peikko to the Customer. “Customer” shall mean acompany or person that purchases Products from Peikko.
These general terms and conditions shall be applied to all sales agreements between Peikko andCustomer (“Parties”) regarding the Products, including all future sales agreements between the Partiesand concerning the Products, even if the Parties will not expressly agree on application of these generalterms and conditions.
These general terms and conditions shall take precedence over any other written or oral conditions andover any conditions presented by the Customer, unless otherwise agreed between the Parties in writing.
2. Delivery term
Unless expressly otherwise agreed, the Products will be delivered Ex Works Peikko’s Factory (as perIncoterms 2000 or its subsequent version).
3. Prices, payment term
Unless expressly otherwise agreed by the Parties, the agreed price shall be net price exclusive of VAT,i.e., it does not contain packing-, transport-, insurance-, or other similar costs, nor VAT that will beadded to the price of the delivery.
Unless otherwise agreed, the Customer shall pay the total purchase price within 14 days from the dateof the invoice.
4. Retention of title
Title to the sold Products shall remain with Peikko until the purchase price with possible interesthas been fully paid.
5. Anticipated breach
In the event there is a justified reason to doubt the Customer’s liquidity, due to the facts thathave arisen after conclusion of the sales agreement, Peikko may cease performance of itsobligations, for example by preventing delivery of the Products to the Customer or by preventing
115Peikko Group Product Catalogue 02.02.2015
installation or other use of already delivered Products, until the purchase price has been fullypaid or the Customer has placed an acceptable security.
6. Inspection of the Products
The Customer shall duly inspect the delivered Products without delay and in any event not later thanwithin seven (7) days after the delivery. Within the same time the Customer shall familiarize itself withthe delivery lists, written Product descriptions and other written material concerning the Products aswell as with available Product information at Peikko’s website www.peikko.com The Customer shall makea written complaint concerning defective Products without delay and in any case not later than withinseven (7) days upon delivery of the Products. Otherwise, the delivery is deemed to be accepted by theCustomer.
Before installing, connecting or otherwise using the Products, the Customer shall once more carry outduly inspection of the Products.
7. Liability of Peikko for delayed delivery
In the event that the delivery is in delay, the Customer shall be entitled to liquidated damages equal to0.5% of the purchase price of the delayed Products per each full week of delay, provided that themaximum amount of liquidated damages shall be 5% of the purchase price.
Peikko’s liability for delayed deliveries shall be limited to the payment of liquidated damages. In noevent shall Peikko be liable for any additional damages, unless Peikko has been guilty for intentionalmisconduct or gross negligence.
8. Liability of Peikko for non-conformity of the Products
Should the delivered Product be non-conforming (and provided that the Customer has given a notice ofthe lack of conformity in compliance with Clause 6), Peikko may at its option and with its own costeither repair the non-conforming Products, replace the Products with conforming Products or reimburseto the Customer the price paid for the non-conforming Products and other provable costs of theCustomer.
Should the agreed delivery be in delay due to non-conformity of the Products, the Customer shall beentitled to liquidated damages equal to 0.5% of the purchase price of the non-conforming Products pereach full week of delay, provided that the maximum amount of liquidated damages shall be 5% of thepurchase price.
Peikko’s liability for non-conforming Products shall be limited to the payment of liquidated damages. Inno event shall Peikko be liable for any additional damages, unless Peikko has been guilty for intentionalmisconduct or gross negligence.
9. Limitation of liability
Peikko’s liability for delay, for non-conformity of Products for other causes of any direct, indirect or anyother damage, shall be limited to the purchase price agreed by the Parties.
116 Peikko Group Product Catalogue 02.02.2015
In no event shall Peikko be liable for lost profit or any damage caused by loss of production, loss ofturnover, or by interruption of business.
The limitation of liability is not valid should Peikko have been guilty for intentional misconduct or grossnegligence.
10. Force majeure
A Party is not liable for damage or delay in so far as the damage or delay was due to impediment beyondhis control, and provided that (a) he could not reasonably be expected to have taken into account theimpediment at the time of the conclusion of the sales agreement, and (b) he could not reasonably haveavoided or overcome its effects.
Such an impediment can be, for example; (i) strike, lockout, boycott or other action of workmen alsowhen a Party is itself an object or party thereof; (ii) fire or discontinuance of energy production,delivery of water, electricity or heating; (iii) exceptional weather condition; (iv) partial or total damageof machinery or plant; (v) lack of components, parts, raw materials or fuel; or, (v) discontinuance ofcommon transport. Subcontractor’s delay shall be deemed to constitute an acceptable force majeuresituation should the subcontractors delay be due to circumstances described in this clause.
A Party shall inform the other Party of the event of force majeure as well as of the termination of theevent of force majeure, as soon as reasonably possible.
In the event that the force majeure situation continues longer than three (3) months, both Parties havea right to terminate the sales agreement with immediate effect, and without liability.
11. Applicable law
The sales agreements concerning the Products concluded between the Parties shall be governedby the laws of Finland.
12. Dispute settlement
Any dispute, controversy or claim arising out of or relating to sales agreement concerning Products, orthe breach, termination or validity thereof shall be finally settled by arbitration in accordance with theArbitration Rules of the Central Chamber of Commerce of Finland. The place of arbitration shall beHelsinki.
Notwithstanding the aforesaid, Peikko may undertake legal proceedings in the district court of Helsinki,Finland.
117Peikko Group Product Catalogue 02.02.2015
AustraliaAustraliaPeikko Australia Pty LtdLevel 9Avaya House 123 Epping RoadNorth Ryde NSW 2113AustraliaTel. +61 (2) 96 222 226www.peikko.com.au
AustriaAustriaPeikko Austria GmbHZehentweg 6 6833 WeilerTel. +43 5523 521 210Fax. +43 5523 521 2120www.peikko.at
BelarusBelarusFLLC Peikko BelrusBetonji passage 19a-211bБетонный проезд 19а-211б220036 MinskTel. +375 17 200 57 06Fax. +375 17 200 57 06www.peikko.by
Bosnia and HerzegovinaBosnia and HerzegovinaPeikko Slovakia s.r.o.92591 Kráľová nad Váhom 660SlovakiaTel. +385 (0) 99 647 2007www.peikko.ba
CanadaCanadaPeikko Canada Inc.955 Fernand Dufour G1M 3B2Quebec CityTel. +1 418 263 2023Fax. +1 418 263 2024www.peikko.ca
ChinaChinaPeikko Construction Accessories(Zhangjiagang) Co., LtdNo. 9 Fuxin Rd. ZhangjiagangEconomic Development Zone(North Region) JiangSuProvince215600Tel. +86 512 58166601Fax. +86 512 58166602www.peikko.cn
CroatiaCroatiaPeikko Slovakia s.r.o.92591 Kráľová nad Váhom 660SlovakiaTel. +385 (0) 99 647 2007www.peikko.com.hr
Czech RepublicCzech RepublicPeikko Czech Republic s.r.o.Saveljevova 18/1629 14700Prague 4Tel. +420 244 466 217Fax. +420 244 461 536www.peikko.cz
DenmarkDenmarkPeikko Danmark ApsHestehaven 21 N 5260 OdenseSTel. +45 6611 1065Fax. +45 6611 1025www.peikko.dk
EstoniaEstoniaPeikko Eesti OÜKriidi 12 11415 TallinnTel. +372 607 4285Fax. +372 607 4283www.peikko.ee
FinlandFinlandPeikko Finland OyPL 104 Voimakatu 3 15101LahtiTel. +358 20 707 511Fax. +358 3 733 0152www.peikko.fi
FranceFrancePeikko France SASBâtiment AXE NORD 3ème étage11 avenue Michelet 93400Saint OuenTel. +33 1 4946 1315Fax. +33 1 4820 5313www.peikko.fr
PEIKKO OFFICES
118 Peikko Group Product Catalogue 02.02.2015
GermanyGermanyPeikko Deutschland GmbHBrinker Weg 15 34513 WaldeckTel. +49 5634 99470Fax. +49 5634 7572www.peikko.de
GreeceGreecePeikko GreeceAgamemnonos 13 Holargos15561 AthensTel. +30 20 6564644Fax. +30 20 6564644www.peikko.gr
GroupGroupPeikko Group Corp.P.O.Box 104 Voimakatu 315101 Lahti FinlandTel. +358 20 707 511Fax. +358 3 733 1138www.peikko.com
HungaryHungaryPeikko Magyarország Kft.Petőfi tér 3-5 A lépcsőház 1/31052 BudapestTel. +36 1 269 5463Fax. +36 1 784 0969www.peikko.hu
IndiaIndiaPeikko India Pvt Ltd60/13Flat No.1 "Niwara"Bharti Niwas ColonyErandavanePune-411004 MaharashtraIndiaTel. +91 20 6400 0358www.peikko.in
IndonesiaIndonesiaPeikko APAC (id)
Tel. +86 (0) 512 5830 9909www.peikko.co.id
ItalyItalyPeikko Italia S.r.lVia Ugolini 30 20125 MilanoTel. +39 02 643 1394Fax. +39 02 6410 9388www.peikko.it
LatviaLatviaSIA Peikko LatvijaGanību dambis 24A 1005 RigaTel. +371 66051836www.peikko.lv
LithuaniaLithuaniaUAB "PEIKKO Lietuva"Naglio g. 4A 52367 KaunasTel. +370 37 350 261Fax. +370 37 351 063www.peikko.lt
MacedoniaMacedoniaPeikko Slovakia s.r.o. (mk)92591 Kráľová nad Váhom 660SlovakiaTel. +385 (0) 99 647 2007www.peikko.mk
NetherlandsNetherlandsPeikko Benelux B.V.Leemansweg 51 6827 BXArnhemTel. +31 26 3843866Fax. +31 26 3639277www.peikko.nl
NorwayNorwayPeikko Norge AsKobbervikdalen 119 3036DrammenTel. +47 32 208 880Fax. +47 32 208 881www.peikko.no
119Peikko Group Product Catalogue 02.02.2015
PhilippinesPhilippinesPeikko APAC (ph)
Tel. +86 (0) 512 5830 9909www.peikko.ph
PolandPolandPeikko Polska Sp. z o.o.Cypriana Kamila Norwida 280-280 GdańskTel. +48 58 5514018Fax. +48 58 5514030www.peikko.pl
RussiaRussiaOOO "Пейкко"197348 Санкт-ПетербургКоломяжский пр. 10лит. ФTel. +7 812 329 0704Fax. +7 812 329 0704www.peikko.ru
Saudi ArabiaSaudi ArabiaAL RASHED PEIKKO LLCP.O.Box 66333Dammam 31576Kingdom of Saudi ArabiaTel. +971 6 7453021Fax. +971 6 7453028www.peikko.ae
SerbiaSerbiaPeikko Slovakia s.r.o.92591 Kráľová nad Váhom 660SlovakiaTel. +381 (0) 63 58 9955www.peikko.rs
SingaporeSingaporePEIKKO Singapore Pte. Ltd.10 Admiralty Street North LinkBuilding #05-89 Singapore757695www.peikko.sg
SlovakiaSlovakiaPeikko Slovakia s.r.o.Králová nad Váhom 660 925 91Kráľová nad VáhomTel. +421 31 3212 151Fax. +421 31 3212 109www.peikko.sk
SloveniaSloveniaPeikko Slovakia s.r.o.92591 Kráľová nad Váhom 660SlovakiaTel. +381 (0) 63 58 9955www.peikko.si
SpainSpainPeikko Spain SLApdo 67 Calle del Oro 32 28770Colmenar Viejo MadridTel. +34 91 846 7473Fax. +34 91 845 3050www.peikko.es
SwedenSwedenPeikko Sverige ABP.O.Box 4 Koppargatan 1160102 NorrköpingTel. +46 11 280 460Fax. +46 11 135 940www.peikko.se
SwitzerlandSwitzerlandPeikko Schweiz AGRoute du Petit-Moncor 1bCH-1752 Villars-sur-GlâneTel. +41 26 401 02 02Fax. +41 26 401 02 10www.peikko.ch
TaiwanTaiwanPeikko APAC (tw)
Tel. +86 (0) 512 5830 9909www.peikko.tw
120 Peikko Group Product Catalogue 02.02.2015
ThailandThailandPeikko APAC (th)
Tel. +86 (0) 512 5830 9909www.peikko.co.th
TurkeyTurkeyPeikko Ltd. Sti.İnönü Caddesi 3-7 Erenkoy34738 IstanbulTel. + 90 216 360 7139Fax. + 90 216 369 1126www.peikko.com.tr
UAEUAEPeikko Gulf LLCRAK Office & Warehouse ShedNo. W104-1 to 6 Al HamraIndustrial Area P.O. Box 86031Ras Al Khaimah United ArabEmiratesTel. +971 7 243 3627Fax. +971 7 243 3628www.peikko.ae
UKUKPeikko UK Ltd.Beaumont Way Newton AycliffeDL5 6SNTel. +44 1325 318 619Fax. +44 1325 318 481www.peikko.co.uk
USAUSAPeikko USA Inc.2003 Elmwood ave. - CurtisBuilding Sharon Hill PA 19079Tel. +1 888 734 5561+1 888 PEIKKO1Fax. +1 888 220 3853www.peikkousa.com
121Peikko Group Product Catalogue 02.02.2015
122 Peikko Group Product Catalogue 02.02.2015
123Peikko Group Product Catalogue 02.02.2015
PEIKKO GROUP CORPORATION
Peikko Group, founded in 1965, is a family owned company specializing incomposite beams and fastening products for concrete connections. Peikkoprovides innovative solutions to help customers make their building processfaster, easier and more reliable. Precasters, builders, constructors, developers,flooring specialists, machine manufactures, power plant designers, architectsand structural designers can all enjoy and take advantage of the Peikkosolutions.
The Group has offices in 30 countries in Europe, North America, and MiddleEast. The modern production facilities are located in Canada, China, Finland,Germany, Lithuania, Russia, Slovakia, United Arab Emirates, and UnitedKingdom. Peikko Group, with headquarters in Lahti, Finland, employs more than1000 persons.
Peikko Group CorporationP.O. Box 104Voimakatu 3, FI-15101 Lahti, FinlandTel. +358 20 707 511Fax. +358 3 733 1138www.peikko.com
