Upload
lamkhanh
View
216
Download
1
Embed Size (px)
Citation preview
* Access control * Anti-panic system* For interior use * Several optional devices
UNMOTORIZED PIVOTING GATEPPN
75-89, rue de Guise02500 Hirson - France
Tél : + 33 3 23 99 21 00Fax : + 33 3 23 58 22 19
Email : [email protected] internet : www.kad.fr
For illustration only. May differ from real product.Klein Access Design reserves the right to amend the information above without prior notice and in its sole discretion.
MANUFACTURED IN FRANCE INSTALLED WORLDWIDE
Datasheet 005 D GB PPN © Klein Access Design
UNMOTORIZED PIVOTING GATEPPN
Description
Operation
Safety
Materials
Technical characteristics
Options
The PPN is an access control gate with an unmotorized and bidirectional pivo-ting panel. It is comprised of a stainless steel post, which incorporates the ac-tuating mechanism, and a safety glass panel. Its elegant design and low-noise
damping system make it particularly suitable for the reception areas of offices. The PPN allows the passage of persons with reduced mobility. The PPN is designed for interior installation.
Opening of the access way is actuated by a remote switch (operated by a receptionist or security guard). By pushing, the panel can then be opened to an angle of 90° in both directions. The damping system ensures the automatic return of the panel to the “closed” po-sition upon the release of the latter by the user. The electromagnetic brake secures the access way upon each return of the panel to the “closed” position.
• Post : AISI 304 stainless steel, thickness 2mm, with brushed finish using 220 grain• Panel : Tempered transparent safety glass, thickness 10 mm• Actuating mechanism : mechanism housing of galvanized steel, thickness 4 mm. Components are of galvanized steel construction, with stainless steel fixings
In case of a power cut or fire alarm, or by the action of the remote control system, the gate will be un-locked and may be opened simply by pushing (anti-panic system).
• Power supply : 230 V a.c. or 24 V d.c., with external power supply system• Frequency : 50-60Hz• Power consumption : stand-by 40VA max• Motor voltage : 24 V d.c• Operating temperature : 0 - 45°C (external)• Environmental humidity : less than 80% • Weight : 41 / 45 kg
• Control box with entry and exit button• Badge reader + 100 badges• Glass with protective adhesive film • Laminated glass • 316 stainless steel construction• Glazed guard rails comprised of 2 posts and 1 glass panel (for spatial guidance and positioning)
DESIGNER OF ACCESS SOLUTIONS